Orthonet Case Study

Orthonet Case Study
ORTHONET (AE) – INVINCEA
BACKGROUND
Orthonet is an acquired entity that is looking for help on the Invincea browser protection solution.
Patrick Black, CDO, has designed this AE to use our Invincea API servers within our DMZ. The
API DMZ solution has not been vetted by the security architecture team or been auditing for open
vulnerabilities. This design bypassed several groups, which warrants a major concern.
WANTS
Orthonet is looking to use our Invincea infrastructure once the API servers are setup.
REASON
Control and support from UHG Optum
PREREQUISITES
Orthonet would like access to the Invincea management server
They would like guidance from our UHG project team
ID DESCRIPTION SECURITY ANALYSIS – FIRST GLACE OVERVIEW ... Show more content
on Helpwriting.net ...
A software–as–a–service model is not a desired strategic plan for several reasons. First, it puts
additional stress on internal UHG resources. The internal resources are already fully utilized, so an
additional external service model will only add major resource allocation problems. Second, the
amount of bandwidth coming into and out of the UHG environment may increase the internet cost
and decrease the productivity within the UHG environment. Internet is not cheap, so this needs to be
a factor within the overall decision. Last, the manageability of using one product for dozens of AE's
may break the purpose of the product. Any type of product inefficiency for UHG Optum will not be
acceptable, since this product was primarily purchased for internal use. This product was not meant
for multitenant environments, hence the lack of modularity within the product. Hundreds if not
hundreds of thousands of endpoints could be hitting our API servers, which was a solution not fully
endorsed by the security architecture team. There is a governance level defined within UHG that
may have been missed or not taken into account. The importance of governance allows a
fundamental framework for areas like strategy, awareness, controls, countermeasures, and policies
(Brotby, 2009). Patrick Black has completely taken the governance into his own hands and made
... Get more on HelpWriting.net ...

Budgetary Control Essay
Standard costing:
An expected or foreordained expense of performing an operation or creating a decent or
administration, under ordinary conditions. Standard expenses are utilized as target expenses (or
premise for examination with the real expenses), and are created from recorded information
dissection or from time and movement studies. They quite often fluctuate from real expenses, on the
grounds that each circumstance has its impart of erratic components.
Budgetary control:
Deliberate control of an organization 's operations through foundation of models and targets in
regards to pay and consumption, and a consistent checking and modification of execution against
them.
Contrast between standard costing and budgetary control
1. ... Show more content on Helpwriting.net ...
2. Obtaining: Examination of every obtainment thing to discover its aggregate expense of
procurement, support, and use over its helpful life and, wherever practical, to supplant it with a more
financially savvy substitute. Additionally called quality being used dissection.
Quality building
Quality Engineering could be characterized as a composed methodology to giving the obliged
capacities at the most minimal expense. From the earliest starting point the thought of quality
designing was seen to be cost acceptance exercise, which did not influence the nature of the item.
The straight mistake of a change or completion would not be considered quality building.
As an alternate definition: Value Engineering might be characterized as a sorted out methodology to
the recognizable proof and evacuation of unnecessary expense. Unnecessary expense is Cost which
gives none, of these utilization, nor life, nor quality, nor appearance, nor client characteristics.
Troubles with presenting expense diminishment software engineers:
Lowered specialist certification Employees are interchange feeling that their

Bu385 Sos Material
BU385 Midterm 2 Tutors: Dylan Cowley Greg Krikorian Coordinator: Jason Liou Some images
used from course and textbook slides. 1 Did you know that... Your donation DIRECTLY supports
an education development project in Latin America? AND you can go build the project funded THIS
SUMMER with us? How to Apply! www.lauriersos.com: – Visit the 'Trips' section to see
upcoming opportunities at your school – Click the trip and fill out the online application form. With
questions e–mail outreach@lauriersos.com – If the dates don't work, e–mail
outreach@studentsofferingsupport.ca to see if there is a trip that can work! Interested in an
Outreach Trip? Come to an information session: Tuesday, November 5th at 10pm ... Show more
content on Helpwriting.net ...
– Breakeven, payback period, NPV 20 Breakeven Example Franklin & Bash are looking to
calculate the number of cases they will have to take this month to break even. Their fixed costs are
$45000, their labour costs are $5/case, research materials cost $2/case and they charge $1000 per
case. How many should they take to breakeven? = FC/(R–VC) = $45000/[1000–(5+2)] = 45.32 21
Make or Buy? Oceanic airlines is trying to decide whether they should make or buy their
airplanes. They could make them for $500 000 with cost for labour at $20 000 per week. A supplier's
price is $6 700 000 for 10 planes. Cost is then reduced to $7 500 per week. Make or buy? 22
Solution Make: v = 500 000 F = 20 000 Buy: v = 6 700 000/10 = 670 000 F = 7 500 X = point of
indifference 500000x + 20 000 = 670000x + 7500 12500 = 170000x X = 0.0735 If demand is
variable cost 24 More  Cash flow – (cash received) – (cash outflow for labour, material, etc.)
Present Value – Sum (current value) of all

A Background On Security Design Patterns Essay
In this section, we present a brief background on security design patterns and FCA. 2.1. Security
Design Patterns Christopher Alexander first introduced the concept of design patterns for use of
living spaces, in his book 'A Pattern Language', published in 1977 [3]. The concept of a pattern was
adopted by the software community in the book 'Design Patterns: Elements of Reusable Object–
Oriented Software', published in 1994 whose authors Gamma, Helm, Johnson, and Vlissides are
known as the 'Gang of Four [4]. The first design patterns related to security were published by Yoder
and Barcalow in 1997 which described 7 design patterns. Subsequently, many design patterns and
pattern catalogs were published. Important contributions are by Romanosky [5], Kienzle et al. [6],
Blakley and members of the Open Group security Forum [7], Hafiz et al. [8,9] and the Microsoft
Patterns and Practices group [10,11]. In their book published in 2005, Schumacher and a working
group of security pattern experts, discussed 46 patterns [12]. Steel et al. [13] compiled a catalog of
23 core security patterns for J2EE and web services. Dougherty et al., at the Carnegie Mellon
Software Engineering Institute, described 15 design patterns in their guide to Secure Design Patterns
[14]. Fernandez presented 68 design patterns in the book 'Security Patterns in Practice: Designing
Secure Architectures Using Software Patterns' [15]. Today the total number of security design
patterns is around 400 [16,17]. To

A Case Study Braun Ag
9–990–001 DESIGN MANAGEMENT INSTITUTE CASE STUDY Braun AG: The KF 40 Coffee
Machine This case study came from the Case Study Research and Development Program at the
Design Management Institute's Center for Research. The Center conducts research and develops
educational materials on the role of design and design management in business success. Case
studies, the Design Management Journal, reprints from the Journal, and other educational materials
are available from the Design Management Institute Press. Design Management Institute Press The
Design Management Institute 29 Temple Place, 2nd Floor Boston, MA 02111–1350 USA Phone:
617–338–6380 Fax: 617–338–6570 Email: dmistaff@dmi.org Web site: www.dmi.org Harvard
Business School Publishing ... Show more content on Helpwriting.net ...
"We'll never bring out just a me–too product" echoed in every department. The Gillette Connection
In 1967, the Braun brothers sold the company to an American consumer products giant, Gillette. The
Gillette Company, well known for its mass–produced, mass–marketed products like razors, blades,
and toiletries, hardly seemed the company to become the parent of an elite–class German firm. But
Gillette was no stranger to Europe, having marketed its goods on the continent and in Britain since
the turn of the twentieth century. It now saw the Braun acquisition as an opportunity to cover the dry
end of the shaving business, as well as to extend its influence upward. Braun, for its part, had by
1967 grown to over 5,700 employees and operated in 144 countries, but it was too small to compete
with the multinationals. Its management saw Gillette as a source of funding to enable them to do so.
Shortly afterwards, Braun moved its headquarters from Frankfurt to Kronberg, a few kilometers
away. For the first several years, Gillette left Braun's product strategy intact while infusing some of
its management expertise into the organization. Very few people knew that this German company
par excellence had an American owner. Braun expanded its operations in other countries and began
to extend its target markets beyond the opinion leaders it had originally cultivated. Braun's Spanish
operations were a case in point.

An Overview of Target Costing
1
AN OVERVIEW OF TARGET COSTING
Introduction
Many managers often underestimate the power of target costing as a serious competitive tool. When
general managers read the word "costing", they naturally assume it is a topic for their finance or
accounting staff. They miss the fact that target costing is really a systematic profit and cost
management process.
What Is Target Costing?
CAM–I defines target costing as the maximum amount of cost that can be incurred on a product and
still earn the required profit margin from that product. This is captured by the equation
Target Cost = Price – Profit
At first sight the equation appears to reverse the familiar cost plus price equal profit that many firms
use. However, behind the inversion of ... Show more content on Helpwriting.net ...
Together the two variables determine a market price for the product.
Setting prices for new models of existing products, such as this year's model of a video cassette
recorder (VCR), starts with the current prices. These prices are adjusted for the features added or
dropped. For example, assume we add to the new VCR the ability to view tapes in different formats
(NTSC, PAL and SECAM). Also assume that we delete an FM radio which was on the previous
model since it is not popular. The revised price may be set by taking the current price, adding the
price that customers are willing to pay for the multiple format feature and deleting from this price
the value customers place on the radio.
Setting prices for new products is not easy since there is no existing base to start from. Market
research becomes crucial for this type of product. Fanack, a Japanese company, uses a simple
formula that sets the price at a level that gives them a five–year lead over their competitors. Another
technique is to use the prices for substitute products to develop an initial prices. For example, fiber
optic cable prices may form the basis for pricing satellite–based communication links.
3
The profit target, the second variable in the target costing equation, is set relative to the financial
rate of return that a firm needs to stay viable in its industry. Since return on sales is part of the return
on investment formula, firms often use

The Benefits Of Go Kart Motor Racing
Motor racing is a popular sport in United States and elsewhere in the world. It is recreational,
adventurous and competitive. Motor racing involves motorized vehicles in different kind of racing
or competition. More professional skills and technical knowledge are needed in some of these high
speed racing events such as rallying, car racing, etc. However, there are also motor sports which are
lower in cost and do not require skilled or well–trained drivers. Kart racing is one of them. Kart
racing is an open–wheel motorsport with small, open, four–wheeled vehicles called karts, go–karts,
with different transmission mechanisms depending on the choice of design. They are usually raced
on scaled–down circuits. One typically starts with Karting before moving to the higher ranks of
motorsport. Out of all of the different types of racing in the game, Go–Karts are real fun and
thrilling way to hit the tracks.
This project explores the distinct advantages that Go–Kart should have in today's sports, the design
features needed to build a Go–Kart, and how to stay safe in this fun motorsport.
1.2 Problem Statement
There are many manufacturers and variants of Go–karts models in the market. However there are
fewer models which can satisfy different tastes and requirements.
Comparing the other racing events, Karting has ... Show more content on Helpwriting.net ...
However there are still some obstruction to the growth of Karting among the population. In order to
promote this sport to wider sections of the society, the sports should be more enjoyable, attractive
and safer and safer. One of the major factor affecting the speed of the vehicle is the material of
construction. This project identified Carbon fiber as an alternate material of construction, which
makes the vehicles light weighted. This material is sturdy and trouble free from cracks and other
defects to a great extent, and hence is safer and environment

Compare And Contrast Xbox Vs Ps4
The gaming industry is one of the large businesses that are being practiced to today in the
international market. This is essentially as a consequence of the way that the youthful era is
extremely enthusiastic to play these recreations and this makes a chance of ensuring that they have
the most ideal gear for the diversions. In the industry, the two biggest players are Microsoft and
Sony. These are the producers of x box and PS4 respectively. The two are the main type of gadgets
used and are also the most compared. I have played the games with both of them and Playstation 4 is
better than the Xbox because it has generally better productivity and high quality of the games
played using it. To start with is the overall hardware design. The Playstation 4 has a better overall
design as compared to the design of the Xbox. This is first attributed to the size. Both machines are
reasonably big but the x box is bigger than the ... Show more content on Helpwriting.net ...
This means that the games played using this technology seem more realistic and this makes them to
be more user friendly. The x box is not that far off but has considerably lesser advantage when it
comes to the graphics of the games. This generally makes people to prefer playing a game on the
play station as opposed to the x box because it has better color graphics and makes the games to be
able to enjoy more. In conclusion, it is notable that the play station four is better than the x box one
because of various factors. The Playstation delivers a more fun gaming experience and this is to the
advantage of the people that use it to play the many different games. It would also go a long way in
making sure that people are satisfied the x box made their unit to be more customer friendly by
making sure things like internal hard disks are interchangeable with more advanced once when they
are made available in the

Braun Ag: the Kf 40 Coffee Machine
9–990–001
DESIGN MANAGEMENT INSTITUTE
CASE STUDY
Braun AG: The KF 40 Coffee Machine
This case study came from the Case Study Research and Development Program at the Design
Management Institute's Center for Research. The Center conducts research and develops educational
materials on the role of design and design management in business success. Case studies, the Design
Management Journal, reprints from the Journal, and other educational materials are available from
the Design Management Institute Press. Design Management Institute Press The Design
Management Institute 29 Temple Place, 2nd Floor Boston, MA 02111–1350 USA Phone: 617–338–
6380 Fax: 617–338–6570 Email: dmistaff@dmi.org Web site: www.dmi.org Harvard Business
School ... Show more content on Helpwriting.net ...
Yet nothing is worth losing our reputation for superior quality. Not even the mass market." Stroth,
who had served for over a decade in various communications positions at Braun, was very sensitive
to the importance of Braun's "visual equity" and the need for maintaining it: "Not only do we have
to think hard about how this corrugated surface design would fit into the Braun "look," but also
about what that look represents. The idea of using design to mask sink marks bothers me in
principle, and it may not work in practice, especially if the stuff doesn't hold up. I'm anything but
risk–averse in this business, but I need to be convinced." "What about the chairman?" asked
Kahlcke. "I know he liked the design, and I know he wants the product. What does he think about
the material at this point?" "You tell me," answered Lorne Waxlax, chairman of the board and
Braun's CEO. He would have to make the ultimate decision and had just dropped in, as was his
4
custom, to get the latest thinking on the KF 40. HISTORY AND CULTURE Braun AG began as a
family–owned radio and small appliance business founded in 1921 by Max Braun.2 In the 1940s,
Braun developed a novelty, the electric razor, which he introduced in 1950. After Braun's death in
1951, his sons, Artur and Erwin, took over the business. Three years later they asked their friend
Fritz Eichler, an artist then working in the theater, to help them find a new approach

Target Costing
Article 32
TARGET COSTING FOR NEW–PRODUCT DEVELOPMENT: PRODUCTLEVEL TARGET
COSTING
Robin Cooper and Regine Slagmulder
Editors' Note: This article is an updated synthesis of in–depth explorations contained in Target
Costing and Value Engineering, by Robin Cooper and Regine Slagmulder (Portland, Oregon:
Productivity Press, 1997). Part two of the series discusses product–level target costing; part three, to
be featured in an upcoming issue, will address component–level target costing. tomers.
Consequently, the objective of product–level target costing is to increase the allowable cost of the
product to a level that can reasonably be expected to be achievable, given the capabilities of the firm
and its suppliers (see Exhibit 1). ... Show more content on Helpwriting.net ...
For the current cost to be meaningful, the components used in its estimation must be very similar to
those that eventually will be used in the new product. If the existing model uses a 1.8–liter engine
and the new model uses a 2.0–liter one, for example, current cost would be estimated using the cost
of the most similar 2.0–liter engine currently produced by the firm. Because the allowable cost is
derived from external conditions without consideration of the firm's internal design and production
capabilities, there is a risk that the allowable cost will not be achievable. In this case, to maintain the
discipline of target costing, the firm must identify the achievable and unachievable parts of the cost–
reduction objective. Analyzing the ability of the product designers and suppliers to remove costs
from the product (see Exhibit 3) derives the achievable or target cost–reduction objective. The
process by which costs are removed from the product is called value engineering, and it depends
heavily on an interactive relationship with the suppliers. The purpose of this relationship is to allow
the suppliers to provide early estimates of the selling prices of their products and, when possible,
insights into alternative design possibilities that would enable the firm to deliver the desired level of
functionality and quality at reduced cost. The unachievable part of the cost–reduction objective
(referred to in Exhibit 2) is called the strategic

Kaya Case Study
Looking at the data collected on Kaya, as a scholar practitioner, I would want to do an assessment to
find out what are Kaya strong points. Just looking at the data it appears that Kaya may have some
difficulty socializing with other children and the cause could be several things. I am supporting this
with the fact that the high frequency behaviors are those classified as off–task, the fact that Kaya has
difficulty making eye contact for more than 3 consecutive seconds. Unfortunately, the interval data
does not give me the cause or antecedent of what could be causing this type of behavior. This child
could be bullied, she could have low self–esteem, she could be shy, she could be homeless, and or
she could be borderline autistic, etc. There ... Show more content on Helpwriting.net ...
As the results show there is a difference in the measurement of the base line and the behaviors after
the intervention. Off Task 10 min observation 10 second intervals Date Totol time behavior occured
min 1 2 3 4 5 6 7 8 9 10 0 Eye Contact X X X X X X X X X X X 0 Physical Aggression X X X X X
X X X X X X 0 Verbal Aggression X X X X X X X X X X X Physical Aggression 30 min
observation Date Total time behavior occurred Total time behavior occurred min 1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 30 Eye Contact I x X X X I X x I x X x x 3 Physical Aggression
X X X X X X X X X X X x X X X X X x x 1 Verbal Aggression X X X x X X X X X X X I X 1
Verbal Aggression 10 min observation Date Total times behavior occurred min 1 2 3 4 5 6 7 8 9 10
Eye Contact x I X X X X X x I 1 Physical Aggression X X X X X X X X x x x 0 Verbal Aggression
X X x X X X X X X x x

Revolutionary Accomplishments
Since the beginning of time, revolutionary accomplishments have been marked by mankind
overcoming fundamental obstacles; and in my opinion, one of the most challenging fundamental
obstacles we've tried to take on is gravity itself. Only in the past century have we been able to fly. So
in perspective, the achievements Boeing and Lockheed Martin made in the Joint Strike Fighter
Program are truly revolutionary. In the end Lockheed won the competition, and after watching "The
Battle of the X–Planes", I believe their success was due to their simple yet robust initial design.
Both teams had very clear prompts: to replace a wide range of existing United States aircraft with a
more agile and economic alternative. Being the underdogs in the market,

What Type Of Anesthetics For Patients For A Pain Free...
Part A: Career Research
Biology
Chemistry
Physics
Earth–Science
Anesthesiologist https://www2.careercruising.com/careers/profile–at–a–glance/ Anesthesiologist
give anesthetics to patients for a pain–free surgery. They have long working hours, but make 100k–
300k a year. They access medical history to choose what type of anesthetics to be given and monitor
the patient during surgery. Requires University level education to attend med school.
Chemical Engineer https://www2.careercruising.com/careers/profile–at–a–glance/88 Chemical
Engineers design and operate equipment processes to change physical matter. They design and
develop new machines to produce different chemical reactions. They make 45k–135k a year.
Chemical engineers sometimes would work with different hazardous chemicals. Requires University
level of education.
Civil Engineering https://www2.careercruising.com/careers/profile–at–a–glance/95 Civil Engineer
help to design buildings, railways, highways, bridges,etc. They plan on the construction of buildings
and inspect the workplace of project sites. Spends 40–50 hours working and earn 40k–120k a year.
Requires university level of education.
Climatologist
https://www2.careercruising.com/careers/profile–at–a–glance/706
Climatologist study different weather patterns and factors that would affect climate. They would
collect data on past and present weather patterns and try to solve climate problems. They earn 47k–
120k a year and spend around 40 hours a week working.

X Opoly
Case Analysis
"X–Opoly, Inc."
1 Summary
The text deals with the topic of developing and producing a board game, called X–Opoly. The game
is similar to the famous game ''Monopoly''. It was the idea of two students. Their business has grown
rapidly. This year they are expecting that they will sell 50,000 units. Over next 5 years the sales will
grow 25 percent annually.
The order of the game has to be differentiated in ordering a new game and ordering a game, which
was already produced. For every new game one employee of the art department and the client have
to set the design. The required time can vary because it depends on the customer's specification. The
next step is printing. In the printing department the design of the ... Show more content on
Helpwriting.net ...
Capacity per year = time available x stations = days x hours per daytotal task time x stations =
200days x 7.5h0.18h x stations = 8,333 units for 1 station = 50,000 units for 6 stations
= 158,333 units for 19 stations
Capacity per day = Capacity p.a. / 200days = 791,67units for 19 persons
Number of theoretical workstations:
NT = ∑task time / cycle time = 650108 = 6.02 select 7 workstations
The line's maximum capacity amounts to 791.67 units per day assuming that it is operated for 7.5
hours. Assuming that X–Opoly operates 200 days per year, the capacity is 58,333 units per year.
Compared with the expected demand the capacity is three times higher than the demand (50,000
units). Therefore there is an overcapacity of more than 100,000. One consequence could be a falling
price and the production of waste. A fall in the price would lead to a decline of the return on
investment as well as the cash flow. That is why it is necessary to use fewer stations in order to save
resources.
In the calculation it can be said that they only 7 stations are needed. With this number of
workstations one could achieve the highest efficiency at this moment. But the company will grow
rapidly. Therefore they had to add new stations every year.
However, the company expects that its sales will grow 25 percent annually for the next five years.
As illustrated in Table 1 the demand after 5 years will be approx.

Essay about Chapter 6 solutions
Programming Logic and Design, 6e Solutions 6–1 Programming Logic and Design, 6th Edition
Chapter 6 Exercises 1. a. Design the logic for a program that allows a user to enter 10 numbers, then
displays them in the reverse order of their entry. Answer: A sample solution follows Flowchart:
Pseudocode: start Declarations num index num SIZE = 10 num numbers[SIZE] = 0,0,0,0,0,0,0,0,0,0
getReady() Programming Logic and Design, 6e Solutions 6–2 while index < SIZE getNumbers()
endwhile finishUp() stop getReady() index = 0 return getNumbers() output "Enter a number for
position ", index input numbers[index] index = index + 1 return finishUp() output "The numbers in
reverse order are: " while index > ... Show more content on Helpwriting.net ...
a. Daily Life Magazine wants an analysis of the demographic characteristics of its readers. The
Marketing department has collected reader survey records containing the age, gender, marital status,
and annual income of readers. Design an application

The Effect Of The Slat System Essay
In order to gauge any effects the slat system, with various weights, may have on the shock wave,
several baseline tests were run. These tests did not have the device installed in order to record and
understand the basic performance of a shock wave coming straight from the shock tube. To record
the pressure profile of the wave within the expansion section, GageScope was used. A trigger was
set to detect a rapid rise in voltage from the pressure transducer, and the program would record 1ms
before and 10ms after the trigger. The initial baseline test can be seen in Figure X below. For a
greater focus on the effects of the device on the shock wave, all charts for comparison has been
narrowed to 2ms after the trigger. The two significant runs showing the pressure profile of the shock
wave are shown in Figures X & Y.
Figure x: Baseline Test 1 Full Recording
Figure x: Baseline Test 1 – 2ms Recording
Figure x: Baseline Test 2
These figures show that the pressure rises from atmospheric (0mV) to peak pressure in a rise time of
around 0.000039 seconds, or 39 µs. This is representative of a shock wave due to a nearly
instantaneous rise time. Baseline test 1 burst at 51 psi while baseline test 2 burst at 53 psi.
The initial design did not perform effectively at achieving its intended functions when installed and
tested with the shock tube. Upon firing the shock tube, the slats would not rotate. Several firings
were attempted, all resulting in no rotation of the rods. The

The Optimization Problem Of Matlab Routines
Relevant numerical techniques, which have been done with the help of MATLAB routines, are
applied to solve the arising optimization problem and to find the optimum parameters of the TMD.
For a given mass ratio, µ, one can assume different values of the frequency ratio, f, and for each
frequency ratio assuming a range of damping factor ζ2 of the TMD and estimate the optimum
parameters that minimize a certain desired output. Fig. 8 is an example of the numerical
optimization conducted to estimate the optimal frequency ratio and damping factor of the TMD for
two different mass ratios under wind loads modeled as white–noise. The optimization is based on
the minimization of the displacement of the primary structure. In this numerical optimization, the
responses of the primary structure are normalized, which means that the response obtained with the
TMD when attached to the structure is divided by the corresponding response obtained without the
TMD. The optimal values of the frequency ratio and the damping factor of the TMD are written on
the subfigures. It is shown that a TMD with 1% mass ratio can provide a significant reduction in the
displacement response of the primary structure. The reduction in the displacement depends very
much on the tuning frequency and the damping ratio of the TMD. By increasing the mass ratio from
1% to 5%, the displacement response of the primary structure is reduced. However, the TMD with
5% mass ratio is more robust to the changes in the frequency

Analysis and Design of Fm Transmitter
CHAPTER THREE
ANALYSIS AND DESIGN
3.1 INTRODUCTION
This chapter deals with the process of obtaining the design specifications of the wireless Frequency
Modulated Transmitter with a frequency of 100MHz in a range of 100m under accurate conditions.
From the block diagram shown in FIG. 2.1, various circuit components are now chosen and
appropriate approximate values are now chosen to match its properties as well as perform duties of
the stages.
The entire system could be grouped into two major stages The Q1 stage consisting the oscillator, the
audio amplifier and the modulator The Q2 stage which is made up majorly of the RF amplifier and
the antenna
3.2 Q1 STAGE
One transistor is used as the audio frequency (AF) amplifier.
The ... Show more content on Helpwriting.net ...
For effective coupling, Grob (1977) states that the reactance of the capacitor, XCC should be less
than or equal to 10% of the resistance, R1.
XCC < R1; but R1 = 100KΩ
Let XCC = 10KΩ and f = 20Hz (cut off frequency for the HPF)
But XCC = 1 = 10KΩ 2пfCc
Cc = 1 = 1 a = 0.796 x 10–6F 2пfXCc 2п x 20 x 10 x 103
= 0.796µF Chosen value of CC = 1µF.
C1 also forms a low pass filter with R1.
XC1 < 10%R1
But R1 = 100KΩ, hence letting XC1 = 10KΩ and using a cut off frequency for the LPF = 20KHz,
XC1 = 1 2пfCc
C1 = 1 i
2п x 20 x 103 x 10 x 103 = 0.796 x 10–9F
The design value chosen for C1 = 1nF.
Similarly,
XC4 < 0.1R2, R2= 1KΩ, f = 100MHz
XC4 = 0.1KΩ
C1 = 1 i = 15.9 x 10–12F ≈ 16pF
2п x 100 x 106 x 0.1 x 103

Design value of C4 = 18pF.
3.2.3 DETERMINATION OF PARAMETERS FOR THE FREQUENCY DETERMINING
NETWORK (FDN OR TANK CIRCUIT)
At oscillation, C2 and C2 are voltage devices. C2, C3 and L serve as oscillation frequency
determining network for the colpitt oscillator. The equivalent circuit is shown in FIG. 3.4 C2 C3 L
FIG. 3.4: the FDN.
C = C2C3 ; where C= equivalent capacitance of the tank circuit. C2 + C3 C

Programming
CHAPTER 2: ALGORITHM WORKBENCH (Input, processing, and output)
3. Write assignment statements that perform the following operations with the variables a, b, and c.
a. Adds 2 to a and stores the result in b b. Multiplies b times 4 and stores the result in a c. Divides a
by 3.14 and stores the result in b d. Subtracts 8 from b and stores the result in a
8. Write a pseudocode statement that assigns the sum of 10 and 14 to the variable total.
9. Write a pseudocode statement that subtracts the variable downPayment from the variable total and
assigns the result to the variable due.
11. If the following pseudocode were an actual program, what would it display? Declare Integer a =
5 Declare Integer b = ... Show more content on Helpwriting.net ...
Assume the state sales tax is 4 percent and the county sales tax is 2 percent. The program should
display the amount of the purchase, the state sales tax, the county sales tax, the total sales tax, and
the total of the sale (which is the sum of the amount of purchase plus the total sales tax).
Hint: Use the value 0.02 to represent 2 percent, and 0.04 to represent 4 percent.
9. Celsius TO Fahrenheit Temperature Converter
Design a program that converts Celsius temperatures to Fahrenheit temperatures. The formula is as
follows:
F=9/5C+32
CHAPTER 3 : ALGORITHM WORKBENCH (Modules)
5. Design a module named getNumber, which uses a reference parameter variable to accept an
Integer argument. The module should prompt the user to enter a number and then store the input in
the reference parameter variable.
6. What will the following pseudocode program display? Module main () Declare Integer x = 1
Declare Real y = 3.4 Display x, " ", y Call changeUS (x, y) Display x, " ", y
End Module

Module changeUS (Integer a, Real b)
{
Set a = 0 Set b = 0 Display a, " ", b
}
7. What will the following pseudocode program display?
Declare Integer x = 1 Declare Real y = 3.4 Display x, " ", y Call changeUS (x, y) Display x, " ", y
End Module
Module changeUS (Integer Ref a, Real Ref b)
{
Set a = 0 Set b = 0.0 Display a, " ", b
}
PROGRAMMING EXERCISES (Modules)
6. Body Mass Index

Shampoo Marketing Process
Category
I. INTRODUTION: 1
II. ANLYSIS ON THE MARKET PROCESS: 2
TASK 1: The marketing process: 2
Step 1: Understand Market Place and consumer needs and wants 2
Step 2: Design a customer–driven marketing strategy 3
Step 3: Construct an integrated marketing program that delivers superior value. 5
Step 4: Build profitable relationship and create customer delight. ... Show more content on
Helpwriting.net ...
Ensure the want satisfaction effectively than competitors and improve the welfare of consumers and
society.
For example:
My company focuses on marketing concept. Since its market launch, X–Men have invested to
promote products in the communications and marketing aimed at female customers. In fact, men
rarely spend shopping and often share the shampoo for women. But since X–Men in the market, the
market share of shampoo men used increased to 60% has the distinction of shampoo for men and for
women. My company has passed to a message for customers:' ''If injured husband let his own
shampoo.'' And X–Men'' slogan: ''X–Men, gentleman.'' Message aimed at customer needs and who
want to express their own beauty.
Because the company focused on improving brand, quality products and decided to sell the
company for Marico. The strategy has brought profit for the company doubled before buying ICP.
Table below shows the results of ICP business. (Source: internet)
From marketing the benefits of the brand on the open market was X–Men second highest in

Product Design Personal Statement
"Design is a funny word. Some people think design means how it looks. But of course, if you dig
deeper, it's really how it works." – Steve Jobs.
A Design should not only be about reflecting the practical and aesthetic in business but most
saliently, it should serve people.
The word "Design" has always fascinated me. As a kid I was always filled with curiosity and found
myself not only questioning everything around me, but also trying to creatively improvise them.
Making storage pouches out of used soft drink bottles, Textured Handmade sheets, Deconstructed
Pen drives are some of the things always scattered around in my room.
After my high school I joined "Raffles College of Design and Commerce", Mumbai, to study
Bachelor of Design in Product Design. From the very beginning I was studying among international
students and faculties, helping me inculcate multicultural experiences.
I learnt rigorous Sketching, Design Drafting, 3D Conceptualisation, Rapid ... Show more content on
Helpwriting.net ...
I emerged as the winner for the "Malaysia Airlines Design Competition". I was also a runner up for
"Designomics" for 2 consecutive years.
I started with my first full time job in January 2015 as a Product Designer and Stylist at Volkswagen.
The job profile included making amendments in the existing and new Car models, developing
merchandise for promotional purposes, Client meetings.
As a Designer, the first and foremost challenge lies in understanding not only what the client
"wants" but what the client "needs". After a lot of research and consultation, I felt that Service
Design was the perfect course for me. Not only does it improve and innovate services to make them
more productive for the firms and organisations, but also makes them both utilitarian and desirable
for the society. It upskills the students in the very latest tools and techniques of design and inculcates
skills to co–relate the element of Design to the Process of

Nur504 Week 5 Collaborative Learning Community: Ebp...
NUR504 Week 5 Collaborative Learning Community: EBP Literature Latest
Click Link Below To Buy:
http://hwcampus.com/shop/nur504–week–5–clc–ebp–literature–latest/
This is a CLC assignment.
Follow the instructions provided in CLC Assignment: Evidence–Based Project (EBP).
Utilize the Synthesis Table, Table of Evidence and EBA Project Evaluation Tool to complete your
CLC assignment. Submit these documents for this weeks CLC assignment.
While APA format is not required for the body of this assignment, solid academic writing is
expected and in–text citations and references should be presented using APA documentation
guidelines, which can be found in the APA Style Guide, located in the Student Success Center.
This assignment ... Show more content on Helpwriting.net ...
2008 Gosseling, R.
2000 Joris, J.
1997 Ebeo, C.
2002 Westwood K.
2007 Leech, C
2007 Freitas, E.
2007 Overend, R.
2001 Sungur, M.
2007 Bourne, R.
2007 El Solh
2006 National Guideline Clearing House
2004
Levels of Evidence I II II II III VII I I VII IV III I
Design Systematic Review RTC RCT RCT Observational Study–Non Randomized Case
Report RTC Systematic Review Expert Comment Retrospective
Quantitative Prospective Control Trial NGC/AHRQ Guideline
Evidence does not support IS in prevention of PPCs X X X X
Evidence supporting use of IS to prevent PPCs X
Evidence Supporting Use of NIPPV to Prevent PPCs X X X X X X X
NIPPV/BiPAP Treatment 12/4
12–24hrs Post–op

2 out of 3 hrs X X Intraoperative & 3hrs post–op 48 hrs post extubation 5 on out of 6 hrs
BiPAP S/T–D
Obese Related Surgery X X X
Hip X X X Obese patients X (OSA & surgery)
Abdominal Surgery X X X X X
Thoracic Area/Cardiac X X X
QRTC= quasi–experimental –nonrandomized controlled trials CD=cross–over design CS=case
series PCS= prospective cohort study RCS=retrospective case series MA=meta–analysis
NIPPV=Noninvasive positive pressure ventilation BiPAP=Bi–level positive airway pressure
hrs=hours
NUR–504: Table of Evidence Study 1 Study 2 Study 3 Study 4 Study 5
Author
Study title
Research Questions

Factorial Design Experiments Involvling Combinations of...
Factorial research designs are experiments that involve factorial combinations of independent
variables. Factorial combinations involve pairing each level of one independent variable with each
level of a second independent variable. Factorial combinations make it possible to determine the
effect of each independent variable alone (main effect) and the effect of the independent variables in
combination (interaction effect). The simplest possible experiment involves one independent
variable manipulated at two levels. Similarly, the simplest possible factorial design involves two
independent variables, each with two levels. Factorial designs are identified by specifying the
number of levels of each of the independent variables in the ... Show more content on
Helpwriting.net ...
They were supplied with information about their partner so that they could get a sense of his
personal characteristics. In the identity–threat condition, their partner held sexist views. For
instance, they would strongly agree with statements such as "I could not work for a female boss
because women can be overly emotional and sensitive". In the identity–safety condition, the partner
was presented as nonsexist and strongly disagreed with sexist statements. The second independent
variable in their 2 x 3 design was word type with three levels: 1) social–identity threatening; 2)
illness threatening; and 3) nonthreatening. This variable was manipulated using a repeated measures
design; thus, all participants were tested with all three–word types in a completely counterbalanced
order. The social–identity threatening words were sexist in content, such as hooters and ho. The
illness–threatening words (mono, Alzheimer's, cancer) were included as a control condition to
determine whether women in the identity–threat condition would pay attention to threatening words
in general and not just social–identity threatening words. The nonthreatening words, also a control
condition, described household objects such as curtains and broom. In on part of Kaiser et al.'s
study, all three–word types were presented subliminally in different colors, and participants' task

Design For Environment, Manufacture And Assembly
School of Engineering TDS Appliances Ltd MNFG413 Design for Environment, Manufacture and
Assembly: 2016 Assignment 2: Design for Manufacture and Assembly SHUO WANG 201089902
Summary of DFE output from Ass. 1 (15%)*, DFE aims to reduce the environmental impacts
associated with products. In theory, this encompasses all the processes which occur during the
lifetime of the product, starting with the extraction of raw materials needed for parts of the product
and ending with the final disposal in landfills or through incineration. In between, a huge number of
processes take place even with the simplest of products, from refining the materials to production of
parts, assembly, packaging, distribution, use by the customer, possibly recycling, etc. In my opinion,
Design for Environment (DFE) methods and tools are umbrella term describing techniques used to
incorporate an environmental component into products and services before they enter the production
phase. In recent years, Design for Environment (DFE) has become more and more important for
companies. DFE seeks to find product innovations that will meet cost and performance objectives
while reducing pollution and waste throughout the lifecycle. In recent years, there has been a trend
towards the rapid development of DFE methods and tools. In the process of DFE analysis, it uses
four methods to analyse the design of coffeemaker, it includes MET, BIRCH, MACDONALD
SMITH and LUTTROP. Based on MET method,we can

Railway Systems Provide Fast, Stable Transport for Mass...
Contents
1. EXECUTIVE SUMMARY 2
2. INTRODUCTION AND OVERVIEW 3
3. PROJECT AIMS 5
4. PRODUCT PERSPECTIVE AND PROPOSED DESIGN DETAILS 5
4.1. Program Design Steps 6
4.2. Proposed Program Outlook 6
4.3. Proposed Program Rundown 7
5. PROJECT PERSPECTIVE AND RISK ANALYSIS 7
6. TEST PLANS 8
7. PROPOSED TIMELINE 8
8. REFERENCES 9 1. EXECUTIVE SUMMARY
The main purpose is to study compare the Energy–Efficient Routing algorithm between Energy
Aware Ladder Diffusion (EALD) and Directed Diffusion (DD) by designing a program for profile
simulation. The project is desire to compare the Energy–Efficient Routing algorithm between
Energy Aware Ladder Diffusion (EALD) and Directed Diffusion (DD) by using mathematical
models, This ... Show more content on Helpwriting.net ...
ATC (automatic train control) which is the control system of railway includes ATO (automatic train
operation) and ATP (automatic train protection) with using ATS (automatic train supervision system)
to monitoring the operation and regulation of EMU in the railway system [3].
Train performance is affecting by tack layout analysis and design. Tack Layout limited the
maximum speed of the train, and which cause the effect on the time applying motoring mode,
coasting mode and braking mode [4] transport time and the efficiency are depending on track layout.
Energy–saving topic is very important at the coming years, which deeply have a link of tack layout
design and train performance, dues studying the tack layout on train performance through the
process of simulation is necessary in the railway system at design stage.
Because of designing the track layout through calculate the train movement is a complicated
procedure, which need to design a program for simulate the train performance to analyze how to
produce a suitable track layout. In the computer programs, LabVIEW (Laboratory Virtual
Instrument Engineering Workbench) software and its GUI tool are used to create a graphic operation
interface. LabVIEW is very easy to program multiple tasks that are performed in parallel by means

of multithreading. This is, for instance, easily done by drawing two or more parallel while loops.
This is a great benefit for test system automation, where it is common practice to

X Opoly
Case Analysis "X–Opoly, Inc." 1 Summary The text deals with the topic of developing and
producing a board game, called X–Opoly. The game is similar to the famous game ''Monopoly''. It
was the idea of two students. Their business has grown rapidly. This year they are expecting that
they will sell 50,000 units. Over next 5 years the sales will grow 25 percent annually. The order of
the game has to be differentiated in ordering a new game and ordering a game, which was already
produced. For every new game one employee of the art department and the client have to set the
design. The required time can vary because it depends on the customer's specification. The next step
is printing. In the printing department the design of the board, ... Show more content on
Helpwriting.net ...
bining the

Hospital Trips
5.3. The total distance traveled by Nurse Thomas Smith in miles
Nurse Thomas Smith's day includes 6 trips from the nursing station to each of the 12 patient rooms
(back and forth), 20 trips to the medical supply room, 5 trips to the break room, and 12 trips to the
linen supply room.
Nurse Walking Distance = ∑ Distance x Frequency
Distance traveled to the 12 patient's rooms:
6 Trips x 2 (back and forth) x2 x (20+30+40+50+60+70) = 3240
+ Distance traveled to the medical supply room: 20x50 = 1000
+ Distance traveled to the break room: 5x40 = 200
+ Distance traveled to the linen supply room: 12x30 = 360
4800 x 2 = 9600 feet
5280 foot = 1 mile
9600 = X
9600/5280 x 1 = 1,818181818
Therefore 1.82 miles were traveled by Nurse Thomas Smith per day at the Traditional Hospital
layout.
5.4. Miles walked by Nurse Susan Jones during her shift
Nurse Susan Jones's day includes 7 trips from the nursing pod to each of the 12 ... Show more
(b) Signs, symbols and artifacts – Painting some of the hospital walls with common mother and
child artifacts (e.g. cartoon characters or flowers), using children's furniture, having a play area, and
having semi–private rooms for tiny babies with customized pull–down Murphy beds for family
members, will allow patients and visitors to feel at ease and comfortable which will enhance a
positive customer experience of the facility.
(c) Ambient conditions – Using warm colours, having 14–foot ceilings and natural lighting with
over emphasized windows in patient rooms, playing soothing music in the background creates a
positive hospital experience for patients and visitors. Research shows that babies improve and
develop much more quickly with this layout design (Heizer and Render

Manual Sizing Of Analog Blocks
There is around 10 to 200 real valued parameters in an analog circuit, and value of these parameters
must be set in order to meet the specification .Circuit sizing is the process of setting these
parameters. for example a simple two stage operational amplifier has around 12 parameters ,which
includes width, length and passive component values of all transistors which have to be set to
achieve specifications such as CMRR(common mode rejection ratio), gain, power ,area ,bandwidth
,noise ,settling time ,offset value and slew rate . Figure 1 two stage operational amplifier
There are 6 mosfets in this figure, so we have two compute values of width and height of 6 mosfets
along with other parameters such as slew rate, bandwidth and noise margin.
A system on a chip (SOC) is an integrated circuit that integrates all components of a electronic
system into a single chip. SOC is made automated to a large extent. Manual sizing of analog blocks
is a bottleneck. There are several methods and techniques of sizing; circuit sizing is an optimization
problem. SPICE model is being considered the most accurate model as the final check–point is spice
correctness since the designer does not have access to the fabrication process so designer relies on
the simulator. Apart from spice there are circuit equations. These equations can be derived taking
some assumption with regard to the transistor behavior. There are three

Swot Analysis : Global Marketing
1. Introduction Global competition causes shortened life cycle for most products and companies can
no longer take the polycentric approach to international business. If a company takes the polycentric
approach to a foreign market, a globally oriented competitor will overcome their initial competitive
advantages by blanketing the global markets with similar product in a short period of time. It is
imperative for companies to acquire capabilities to generate sustainable competitive advantages over
their competitors. How to source globally is a critical strategic plan influenced by the need to
compete. In highly competitive markets, manufacturers either produce in low–cost locations or
outsource their components from low–cost producers on ... Show more content on Helpwriting.net
...
Close coordination between R&D, manufacturing, and marketing activities across national
boundaries is a requirement for global sourcing strategy (Kotabe & Helsen, 2004, Chap. 10).
However there are always conflicts due to different objectives between R&D, manufacturing,
and marketing. Excessive product modification for the ever–changing customer needs will forsake
manufacturing efficiency and have negative cost effects, except for perfectly flexible computer
aided design and computer aided manufacturing facilities. CAD and CAM has improved
tremendously in recent years but the full benefit of flexible manufacturing still have a long way to
go. However in the case of excessive product standardization in order to lower manufacturing cost
will have negative effects on customer satisfaction. Innovative product designs and feature desired
by customer maybe a technological feat but might not be conducive to manufacturing. Product
design for manufacturability and product standardization has become important strategic issues. It is
imperative for companies to develop a sound sourcing strategy in order to exploit efficient
R&D, manufacturing, and marketing on global basis. Product designers, engineers, product
managers, purchasing manager, among others play important roles in corporate strategy
development. As for car manufacturing, Toyota's global sourcing

Brief Technological Innovations Of The Ford Automobile...
Second, Pep Boys must take advantage of the latest technological innovations that will enhance
customer service, productivity and competitive sales to augment their profitability. Constantly
changing technologies, and the need to evolve is a must. As noted by (Stacey, 2011), companies
must not just keep up. They must be leaders in innovations, so that they do not become the
followers, but leaders as well, setting an example for all others to emulate. One aspect of the
increasing of sales has been not just look at finances as the important factor. The encouragement of
employees to create relationships with customers, win their trust and maintain that trust at all times
is of paramount concern. Finally, Pep Boys make more money winning loyalty, practicing integrity
and honesty than just pushing parts and service. The automobile industry drives competition.
Therefore, competition from similar companies that sell the same type of product, as well as
companies that supply organizations with the items they need in order to maintain stock. What if the
Ford automobile company had only 50 percent of their independent dealerships stocked with the
latest models as well as a complete selection of Ford automobiles? How can Ford compete with
other automakers such as Chevrolet if they made sure that all of their dealerships has high
availability and quantity of car selections? The success of companies such as Pep Boys depends on
integral relationships. Therefore, relationships such as

2360 Electrical Installation Work Course C
QUESTION 1a
Block L will be powered by a single phase 100A distribution board.
Power
One ring circuit will provide power for the generator/switch room and substation room and will be
protected by a 32A type C BS EN 60898 RCBO. An RCBO will be used because equipment could
be plugged in and taken outside and it will be type C because inductive loads could be plugged in.
The other ring circuit will provide power for the workshop and restroom and will also be protected
by a 32A type C BS EN 60898 RCBO. An RCBO will be used because equipment could be plugged
in and taken outside and it will be type C because inductive loads could be plugged in inside the
workshop as well as equipment being used inside the restroom.
The roller shutter door ... Show more content on Helpwriting.net ...
The circuits above are therefore

Space X Ethics
Space x is an aerospace manufacture and space transport service company and under a $1.6 billion
contract with NASA. There is also a space x in Los Angeles, California which I am looking forward
to work at after Spartan. The CEO of Space X's name is Elon Musk; Elon is the CEO in the
company at the company in Hawthorne, California. Elon Musk is also known as the founder of
Space X, Which was found In June 2002. What Space X does is design and manufacture spacecrafts,
and they also launch advanced rockets and spacecrafts. Their ultimate goal is to have people start
living on other planets by building spacecrafts that'll make it possible. September 2008 space X
achieved a liquid propellant rocket known as Falcon 1 to reach orbit and also one ... Show more
The duties for hardware engineers are subsystem design and prototype, also to fix all the bugs of the
prototype and debugging them and hardware bug tracking. To become a Hardware Engineer for
Space X you must provide engineering expertise in the area of design, development, and test space.
Hardware Engineering is where you work on the small parts of the computer which are the chips
inside the monitor. Most hardware engineers work in laboratories of research and high tech
manufacturing firms, some work for the federal government.
Structures Engineering is also another position at Space X for engineering. Their goal is to make
sure that they have most mass efficient primary and secondary structures and to make sure all the
factors are safe. Structural engineering has existed since humans first started to construct their own
structures. Structural Engineering deals with design of structures that support loads or resist them
and also have to deal with the analysis. So structural engineering is mostly about doing the safety
part of the

Full Spread Case Study
Alexa Assignment– Create a full spread (8.5 x 22 in), which will act as the opener for the freshmen
section of the yearbook. Make sure to leave room for a headline and copy, which will be added after
the completion of the design. Also design a background for the freshmen mug section; a single
design will be used for all of the mug pages in this section. Theme– (Road trip) Each grade is a part
in a larger story: the freshmen section will act as the start of the journey. The start of a journey can
encompass many different visual queues such as, but not limited to: gathering supplies, packing,
leaving a fixed point. Don't limit yourself to these ideas; design what you feel best represent this
section of the narrative. If you need any input defiantly come and ask me (Parker). Pearl
Assignment– Create a full spread (8.5 x 22 in), which will act as ... Show more content on
Helpwriting.net ...
Also design a background for the junior mug section; a single design will be used for all of the mug
pages in this section. Leave room for headline and copy. Theme– (Road trip) Each grade is a part in
a larger story: the junior section is essentially getting ready for the long haul that is ahead of them in
the up coming year before the final stretch (senior year). This could be visually represented by our
character making a pit stop at a gas station. But don't limit yourself to this idea; design what you feel
best represent this section of the narrative. If you need any input defiantly come and ask me
(Parker). Assignment– Write the yearbook introduction as well as individual introductions to each
grade section (freshmen, sophomore, junior and senior). The overall theme is road trip with an
emphasis on steps of a journey and each *grade section has sub–theme (info below). *It may help to
communicate with the designer as to be able to create a better coherency between the text and visual

Designing A Seven Band Stacked Patch Antenna Design For C,...
Abstract:– In this paper a seven–band stacked patch antenna design for C, X and Ku band is
considered. To generate multiband frequencies micro strip stacked patch antenna is introduced. The
proposed structure is a planar structure having all the dimensions in mm and is designed by using a
substrate of FR4 having thickness 1.6 mm. This proposed antenna is having seven bands of
operation. The considered antenna consists of H–slot loaded fed patch, stacked with dual U–slot
loaded rectangular patch. The size of the antenna is 39.25 x 29.25 x 1.66 mm2. The patch antenna is
studied and simulated using IE3D simulator. The antenna is analyzed by circuit theory concepts to
practically verify the results. The results pertaining to various functional parameters of the
multiband micro strip patch antenna such as RL, Gain and Radiation pattern versus frequency are
obtained.
Keywords:–Dual U– Slot Loaded Stacked Patch, H–Slot loaded Fed Patch, RL(Return Loss),
IE3D,Microstrip Patch antenna, Multiband Antenna
I. Introduction
Every communication system is primarily focused on the usage of antenna as it plays a vital role in
transmitting and receiving the information signals. An antenna is made itself a mandate component
of communication system. The stupendous growth of wireless communication systems along with
wonderful use of radars opens a huge demand to new kind of antennas like small antennas, multi
frequency antennas, and broadband antennas [2]–[1]. Planar multi–resonators and

Geometric Dimensioning and Tolerancing for Mechanical Design
Geometric Dimensioning and Tolerancing for Mechanical Design
Answer Guide
(Answers to the questions and problems at the end of each chapter)
Geometric Dimensioning and Tolerancing for Mechanical Design Answer Guide 2
Chapter 1 Introduction to Geometric Dimensioning and Tolerancing
Chapter Review
Page 7 1. Geometric Dimensioning and Tolerancing is a symbolic language used to specify size ,
shape , form , orientation, the and
location
of features on a part.
2. Features toleranced with GD&T reflect the between mating parts.
actual relationship
3. Geometric Dimensioning and Tolerancing was designed to insure the proper assembly of mating
parts , to improve quality , and reduce cost . 4. Geometric tolerancing allows the maximum ... Show
more content on Helpwriting.net ...
20. If CAD/CAM database models are used and they do not include tolerances, tolerance values
CAD product definition data set. may be expressed in a
Geometric Dimensioning and Tolerancing for Mechanical Design Answer Guide 5
Chapter 3 Symbols, Terms, and Rules
Chapter Review
Page 40 1. 2. 3. 4. What type of geometric tolerance has no datum features? Which of the form
tolerances is the most common?
Form controls
Flatness

What type of geometric tolerances indicates an angular relationship with specified datum
Orientation controls features? What is the name of the symbol that is used to identify physical
features of a part as datum features and should not be applied to centerlines, center planes, or axes?
Datum feature symbol
5. 6. Datum feature identifying letters may be any letter of the alphabet except?
I, O, & Q
If the datum feature symbol is placed in line with a dimension line or on a feature control frame
associated with a feature of size, then the datum feature is what is what kind of feature?
A feature of size
7. One of the 14 geometric characteristic symbols always appears in the compartment of the feature
control frame. 8. 9. The second compartment of the feature control frame is the
first section. tolerance
The tolerance is preceded by a diameter symbol only if the tolerance zone is
cylindrical .
.
10. Datum features are arranged in order of
precedence or importance
11. Read the feature control

The Pros And Cons Of The Iphone X
The Apple Company has mostly dominated the cell phone industry since their first iPhone in 2007.
Since then, many more iPhones have been created and widely sold throughout the world, including
many new features and looks. Recently, the new iPhone X has dropped, creating a new standard for
phones everywhere and giving cellphone users a tough decision to make. Many debates whether the
new phone is overpriced for its value, however, the iPhone X was priced accordingly because it is
better than previous iPhones and other competitors. Ultimately, the iPhone X is worth its unique
price of $999 because of its superior design and usefulness to the consumer.
The iPhone X greatly attracts customers due to its new, sleek physical appearance, which is an
understandable reason for its price. A key component of the interest in the iPhone X is the larger
screen. It has 82.9% screen–to–body ratio compared to the iPhone 8's 65.6% screen–to–body ratio
(Gordon). This is very helpful to consumers because it uses show–watching and book–reading apps
to their full potential by providing more room for them to fill up the phone. Videos, pictures, social
media apps are more enjoyable on the big screen as well, improving just about every experience the
phone user has (Titcomb). Additionally, a new form of technology has been added to the screen to
enhance the viewing experience, as well as improved upon previous features. The Telegraph writer,
James Titcomb wrote, "Apple has introduced what it calls Super Retina, and what everyone else
calls OLED, to an iPhone for the first time." This new modification allows for greater resolution and
higher contrast on the screen, such as 1,000,000:1 vs 1,400:1. Reportedly, the iPhone X also has the
highest increased resolution, pixel count, and contrast of any previous iPhone. Overall, these
advancements allow for photos and videos to look great and leaves the viewer more satisfied with
every feature and app (Titcomb). Lastly, certain aspects of its appearance were changed to appeal
more to the public, changing its face value. Two distinct characteristics were the glass backing and
the chrome edges. Titcomb said, "the edges are chrome – a nice throwback to the iPhone 4, which
many considered to be

Personal Narrative: My Job Shadowing Day At Dial-X
I spent my job shadowing day at Dial–X. Dial–X is a company that designs, builds, and tests
automated manufacturing machines and systems that take the place of dangerous or unwanted
manned manufacturing positions. I spent my day with Mark Memsic, a mechanical engineer. Mark
designs and helps build the machines that are produced. Mark also solves problems with other
companies' logistical problems. I chose to shadow an engineer because I am considering becoming
an engineer. I enjoy math, science, and technology. I thought that engineering would be a good
choice to shadow based off of that. I hoped to learn if I would continue to become an engineer. I
chose this Dial–X after working to find others. I found two others that could be a definite, but they
did not work out. I also had a few that would not contact me back. Dial–X may not have been my
first option, but it was a good option. I chose Dial–X because I need a job shadow and it seemed
interesting. I am glad that I chose Dial–X because of the things that I learned and the experience. ...
Show more content on Helpwriting.net ...
The whole day, Mark's boss was telling Mark that I was his replacement and that he should pack up
his things. Mark also had a rough time because he did not buy me lunch. I did not expect Mark to
buy me lunch, but everyone else saw a chance to poke fun. Of course, this was after they had been
working for a while. The shop conditions were as you would expect. You could smell welding and
oil. You could see machines being assembled. The place was a little unorganised because of the
volume of work that was happening. The shop also was well lit and the areas that weren't being used
were clean. Over all, the shop seemed to be in a clean state and a working

Target Costing
INTRODUCTION OF TARGET COSTING
Target costing is a system of profit planning and cost management. The required features and
performance of the proposed product are established. Then target costing determines the life cycle
cost at which the product must be produced, to generate the firm's desired level of profit. Given the
product's anticipated selling price (Cooper and Slagmulder,1999, p.166). Note that target costing is
not a method for product costing , it is a technique for cost management. It was devised in Japan,
where it is used widely, particularly in automobile, electrical and equipment–manufacturing
industries (Lorino, 1995). With the effect of globalization, it is gradually gaining acceptance in the
Western world.
EXAMPLE OF ... Show more content on Helpwriting.net ...
Under target costing, all functions of the business must make a firm commitment to designing,
producing and distributing the product with total life cycle costs equal to the target cost.
Technique such as value engineering can be used to find creative ways of achieving some of these
targets. Value engineering (VE) involves analyzing the design of the product and the production
process to eliminate any non–value–added elements, in order to achieve the target cost while
maintaining or increasing customer value. Value engineering may involve design engineers
modifying the design of some components to make them easier to manufacture and maintain,
substituting more cost–effective material which does not reduce customer value, and improving the
efficiency of production process. Thus, in undertaking VE, it is critical that engineers and product
designers have clear understanding of customer value. Value engineering will also involve working
with suppliers to provide components or raw materials that meet target costs.
ADVANTAGES OF TARGET COSTING 1. To reduce costs before they are locked in
As previously mentioned, it is being increasingly recognised that the major proportion of product
costs, around 70 to 80% (Cooper and Chew, 1996) are effectively fixed during the design stage.
Target costing provides a means to manage costs from the design stage to maximise the potential for
cost reduction. 2. As an analysis which highlights other

The Simulation Design Score Affects The Participant...
Vanessa Schott Written Comprehensive Exam 1.???????What is the goal of ordinary least squares
(OLS) regression? (OLS is the formal name of the typical kind of regression analysis) The goal of
ordinary least squares (OLS) regression is to best predict one variable?s behavior against another.
For example, I would like to predict a participant?s Clinical Judgment Score against the simulation?
s Simulation Design Score. My research question is Does the Simulation Design Score affect the
participant Clinical Judgment Score? My hypothesis is that as the Simulation Design Score
increases the participant?s Clinical Judgment Score will also increase. Therefore concluding the
better the design of the simulation experience the better the participant will learn clinical judgement
skills. If the variables are positively correlated, as the Simulation Design Scores increases the
participants? Clinical Judgment Scores will increase. If the variables are negatively correlated, as
the Simulation Design Scores increase the participants? Clinical Judgment Scores would decrease. If
Clinical Judgment Scores do not react consistently in relation to Simulation Design Scores, they are
either non–linear or are not correlated. 2.???????How does regression work (statistically, what
happens when you perform a regression)? To continue my hypothetical research question: I would
run a simulation and afterwards each participant would evaluate the simulation using the Simulation
Design Scale. Next

Orthonet Case Study

Recommended

Recommended

More Related Content

Similar to Orthonet Case Study

Similar to Orthonet Case Study (13)

More from Brianna Johnson

More from Brianna Johnson (20)

Recently uploaded

Recently uploaded (20)

Orthonet Case Study