What do you think are the roles of professional societies in contemp.pdf

•

0 likes•2 views

What do you think are the roles of professional societies in contemporary engineering? Do you expect to join a professional engineering society in the future? Solution Roles of professional societies in contemporary engineering: Engineers have the very unique role for solving social problems using the skills and talent of theirs.They solve the problems using devices, systems and machines.They are responsible for connecting, supplying and protecting the society. One of the key area considered is known as CONNECT. The engineers links communities through transport infrastructure. The roads,railways and aircraft transport systems allow people to travel from one end of globe to other.Also there are technologies like 3G, 4G which enables faster communication with people without any physical transportation.So the Engineers are responsible for connecting people over the globe. The other strand is SUPPLY. The society is not only contributed but also sustained by Water,Gas,Electricity and Sewage Infrastructure.These system are developed by the Engineers which serves the basic needs of everyone. Also another considering aspect is the Protection. There are so many ways in which the engineer is directly or indirectly responsible for protection of the society.The Engineers are responsible for designing the flood defense and military systems.They are also responsible for maintenance of these systems.By inventing such system they become able to protect their country. In addition to these, Engineers are responsible for shaping the future.Their efforts of saving the information and utilizing it on required times has revolutionized the era. Due to the above mentioned roles we can join professional engineering to better shape our society..

Education

Similar to What do you think are the roles of professional societies in contemp.pdf

The elements of a mechatronic system, which are mechanical, electrical and electronic, are interconnected and the connection between the different parts must act as a unit. The exchange of information between two components of the system is possible if there is a communication in common parameters. The interface refers to all the ways to handle the processes in a system. The number and design of interfaces within an architecture and system boundary significantly influence the simplicity, adaptability, and testability of a system. Interfaces, which are hardware and software, define the functionality of the system by inserting functions from one component to another. The article describes the method of selecting the components and the way of testing the system during production. Finally, the system must meet the requirements of the customer. The mechatronic system discussed is an industrial product, created in a digital factory.

Design and Testing Ways for Mechatronic Systems

IJCI JOURNAL

DESIGN AND TESTING WAYS FOR MECHATRONIC SYSTEMS

IJCI JOURNAL

Technology As A Tool 4 Development

Farook_A_Azam

Assignment 1

BeaSolomon

Professional Ethics in Engineering

Karthikeyan I

2016 ISW

Erin Morrow, BRMP

Mobile communication environmental impact for smart cities

Sarvesh Meena

My Passion For Engineering

Websites To Type Papers Bethune-Cookman University

Gheorghe and Katina (2014) Editorial

Polinho Katina

Recent trends in mechanical engineering

MITAcademy1

Looking into the Crystal Ball: From Transistors to the Smart Earth

The Innovation Group

Electrical engineering CA English.docx

Ashutoshprasad27

Career Choices for a Civil Engineering Graduate.pdf

Bharati Vidyapeeth

P01821104110

IOSR Journals

Vignanits ac-in-different-specializations-in-engineering-

RAMESH BABU

To become an engineer, it is important to know the nitty-gritty of the course. You need to select the best specialization that suits your skills. To start with you need to select the Best Colleges for B.tech in Hyderabad. After the college section is done, you need to opt for the specializations which match your interest. Selecting the right specialization can be a tricky task, hence pay close attention to these. Computer Science Engineering: In computer science and engineering, the art of programming computers to perform tasks in an automated fashion is taught. These tasks can be simple like calculating some numbers to something complex like predicting the weather after four days. Popular belief implies that computer science is all about programming personal computers or large supercomputers and servers. However, it also involves dealing with small intelligent systems like embedded systems. Computer engineers are basically electrical engineers who focus less on physics and more on the application of the Math they learn. Computer engineering seems to be the most popular and lucrative right now. They also develop and maintain software that runs huge organizations.

Different Specializations in Engineering

RAMESH BABU

our presentation on the exciting mechanical occasions awaiting us in 2023. Today, we will explore the latest advancements, trends, and innovations in the world of mechanics.We have explored some of the exciting mechanical occasions awaiting us in 2023. From robotics and autonomous vehicles to 3D printing and IoT, the future is full of possibilities. As technology continues to advance, let's embrace these innovations and their potential to improve our lives.

Exploring what’s in store.pdf

Dadu Bante

Advancement In Engineering Technology A Novel Perspective

Deja Lewis

Smart UDS Review Paper

Praveen Ramteke

Incose SE Vision-2035 executive summary

AngelCepedanoBeteta1

Similar to What do you think are the roles of professional societies in contemp.pdf (20)

Design and Testing Ways for Mechatronic Systems

DESIGN AND TESTING WAYS FOR MECHATRONIC SYSTEMS

Technology As A Tool 4 Development

Assignment 1

Professional Ethics in Engineering

2016 ISW

Mobile communication environmental impact for smart cities

My Passion For Engineering

Gheorghe and Katina (2014) Editorial

Recent trends in mechanical engineering

Looking into the Crystal Ball: From Transistors to the Smart Earth

Electrical engineering CA English.docx

Career Choices for a Civil Engineering Graduate.pdf

P01821104110

Vignanits ac-in-different-specializations-in-engineering-

Different Specializations in Engineering

Exploring what’s in store.pdf

Advancement In Engineering Technology A Novel Perspective

Smart UDS Review Paper

Incose SE Vision-2035 executive summary

More from bhim1213

In 1998, Congress passed legislation concerning shifting the burden .pdf

bhim1213

If A denotes some event, what does A denote If P(A)equals=0.997, wh.pdf

bhim1213

How do neutrophils find and get to an infection? Solution Neutrophils nucleus has a complex, lobulated shape. In a cross-section, neutrophils look like they have more than one nucleus. Neutrophils have this unique nuclear shape, it makes these cells very easy to identify under the microscope. They are very abundant, making up about 60% of the immune cells in our blood. They are formed from stem cells in the bone marrow. Neutrophils derives from staining characteristics on hematoxylin and eosin (H&E) histological or cytological preparations. Neutrophils are the first cells to migrate to a site of infection, and with the help of other innate immune cells, they work hard to keep things under control until the powerful adaptive immune system kicks..

How do neutrophils find and get to an infectionSolutionNeutro.pdf

bhim1213

How many times will the following code print \"Welcome to Java\"? int count = 0; while (count Solution Ans) 15) D.10 public class MultiQues { public static void main(String[] args) { // TODO Auto-generated method stub int count = 0; while(count < 10){ System.out.println(\"welcome to java\"); count++; } } } 16) E.45 public class MultiQues { public static void main(String[] args) { // TODO Auto-generated method stub int y = 0; for(int i=0;i<10;++i){ y+=i; } System.out.println(y); } } 17) B.10 public class MultiQues { public static void main(String[] args) { // TODO Auto-generated method stub int y = 0; int i=0; for(i=0;i<10;++i){ y+=i; } System.out.println(i); } } 18) B.n There are n iterations for the given for loop because it is given that i=1 to i <= n so there aren iterations. 19) C.n-1 Here for loop starts from i=1 to i.

How many times will the following code print Welcome to Java in.pdf

bhim1213

From your own words not copy past from internet please Talked about\" allergies\". Thanks. Solution Dear User, you have not mentioned the words limit in your question. so, a brief description of Allergies is provided below in my own words. Answer) Allergies are referred to several reactions or response as an outcome of hypersensitive reaction of our body’s immune system, when exposed to several allergic substances. these allergic substances are called as allergen. there are number of common allergens such as Dust mites, Pollens, Insect stings, Pet dander, Mold spores, Food, household chemicals and Medicines. these substances are not always allergic as the other people are not allergic to them, but some people are allergic to them. our immune system makes antibodies against the foreign particles entering our body. in case, when our immune system is weak (particularly in children) it is possible that encounter of such allergic substances during weak immunity may result in hypersensitive reaction. this first-time hypersensitive response is called as acute response when our immune system starts making antibodies against those substances. further multiple exposures to same allergens result in a higher response and the person becomes allergic to those substances. symptoms of allergies are sneezing, wheezing and coughing, a running nose or blocked nose, a red itchy rash, red itchy watery eyes. these symptoms can be observed within minutes of exposure to allergens. generally, these responses are mild but a prolonged hypersensitive reaction may result in anaphylaxis or anaphylactic shock which is a medical emergency. As per studies, one out of five American is affected with some sort of allergies. and the allergies are more commonly observed in the developed countries. there are different diagnostic tests to identify whether a person has an allergic response to possible allergens or not. these tests include patch testing, skin prick testing, blood testing etc. in these tests, a much smaller dose of allergen is provided to the person to observe the immune response. once a person is identified allergic to certain substance, it is consulted to avoid the exposure to those substances. while, in case of sudden exposure they are provided with the medications such as antihistamines, epinephrine and glucocorticoids etc. under certain limitations, immunotherapy is also provided as treatment against and asthma and allergies to insect bites..

From your own words not copy past from internet please Talked about.pdf

bhim1213

Forms an important part of the subunits of the ribosome. The _ are spliced back together to form the mRNA molecule. Is a nucleic acid that directs the production of proteins? Solution Protein forms an important part in the subunits of ribosomes. The precursor messenger RNA is spliced back together to form the mRNA molecule. Yes,nucleic acid (DNA or RNA) directs the production of proteins. They have informations for the process of gene expression..

Forms an important part of the subunits of the ribosome. The _ are sp.pdf

bhim1213

During DNA replication, a series of steps are required to ensure that the genetic information in a cell is correctly and accurately duplicated. Place the following phrases in the correct order. Binding proteins stabilize the unwound double helix. DNA helicase unwinds the DNA double helix. Topoisomerase IV separates linked chromosomes. DNA pol III adds complementary nucleotides. DNA ligase seals any nicks in the DNA. DNA pol I replaces the RNA primer. Primase generates a RNA primer that binds to the origin. Solution During DNA replication, a correct order of steps takes place to ensure that the genetic information in a cell is correctly and accurately duplicated..

During DNA replication, a series of steps are required to ensure tha.pdf

bhim1213

Disease X occurs when someone has the xx genotype. However, only 20 of 50 people with the xx genotype actually get the disease. Of the 20 who get disease X, 10 severely display the disease while 10 have a milder form. Explain using the appropriate terms. Solution Answer: XX genotype indicate that it is a autosomal recessively inherited trait and it is female. sickle cell anaemia is one best example which match these results. XhXh = Homozygous dominnant (10 people are severely effected). XXh = heterozygous dominant (10 people may act as carriers) which are milder forms..

Disease X occurs when someone has the xx genotype. However, only 20 .pdf

bhim1213

Darwin\'s Theory had five main tenets (or components), what are they? ). These are not to be confused with the logic of Natural Selection, which is sometimes referred to as the tenets of Darwin’s theory Solution 5 major tenets of Darwins theory are : 1. The evolution stating that the world is directionally getting transformed continuously with tha passage of time, 2. The common descent which states that every group of the branching organism has decended from a common ancestor 3. The gradualism which states that during evolution, the transformation happens very gradually not at once, 4. The multiplication of species which states that the sympatric speciation leads to the diversification in species, and 5. The natural selection which states that the evolutionary change happens due to the survival of the fittest because the most fit would have a reproductive advantage, generation after generation..

Darwins Theory had five main tenets (or components), what are they.pdf

bhim1213

Define: toxic shock syndrome (TSS) impetigo MRSA Solution Answer: 1. Toxic Shock Syndrome (TSS): It is a severe human disease caused by bacteria Staphylococcus aureus. The bacteria produced superantigens which act as a toxins (mainly Toxic Shock Syndrome Toxin-1) to cause this syndrome. Superantigens are bacterial proteins that stimulate the immune system much more extensively than do normal antigens. As they provoke such a drastic immune response thus, they are termed superantigens. Their action is to stimulate T cells to proliferate nonspecifically through simultaneous interaction with class II MHC proteins on antigen-presenting cells and variable regions on the chain of the T-cell receptor complex. It is most commonly seen in females who use superabsorbent tampons during menstruation. However, the toxin associated with this syndrome is also produced in men and in nonmenstruating women by S. aureus present at sites other than the genital area such as surgical wound infections. Symptoms: Low blood pressure, fever, diarrhea, an extensive skin rash (like sun burn), and ultimately shedding of the skin. 2. Impetigo: It is the most frequently diagnosed skin (superficial cutaneous) infection caused by bacteria Staphylococcuspyogenes and S. aureus. It is most commonly seen in children. Symptoms: The encrusted pustules, crusty lesions and vesicles surrounded by a red border, usually located on the face. 3. MRSA (Methicillin Resistant Staphylococcusaureus): Bacteria Staphylococcus aureus is a cause of considerable morbidity and mortality as a nosocomial or hospital-acquired pathogen since late 1950s and early 1960s. However, penicillinase-resistant, semisynthetic penicillins have proved to be successful antimicrobial agents in the treatment of staphylococcal infections. But it is unfortunate that the staphylococci become resistant through procuring of a chromosomal gene (mecA) that encodes an alternate target protein which is not inactivated by methicillin. The majority of the strains are resistant to several of the most commonly used antimicrobial agents, including macrolides, aminoglycosides, and the beta-lactam antibiotics, including the latest generation of cephalosporins. Thus, MSRA strains have recently emerged as a major, difficult to treat, hospital-acquired infection in humans, therefore considered as super-bug..

Define toxic shock syndrome (TSS) impetigo MRSASolutionAnswer.pdf

bhim1213

A system was set up in parallel with two components, A and B. The pr.pdf

bhim1213

All content is made permanent for future use. All content will be lo.pdf

bhim1213

a. A waitress is serving 5 people at a table. She has the 5 dishes t.pdf

bhim1213

Biochemistry homework: Focus concept ripening fruit and the activity tin methyl- The link between the production of methanol in wild type and transgenic tomato esterase, the enzyme responsible for methanol production, is examined in fruit. Prerequisite Enzyme kinetics and inhibition. Background major source ofthis methanol is likely Methanol is produced by fruit during the ripening process. The to be from the enzyme p methylesterase which acts upon pectin methyl esters to de-esterify them and produce methanol and other pectic substances One might assume that the production of methanol is correlated with PME activity, but this has not been firmly established. In this case, the investigators at the Plant Science Department at Rutgers University developed a transgenic tomato which was deficient in PME activity. By comparing the behavior of the transgenic tomato with the wild type tomato, the production of methanol in the ripening tomato fruit may be better understood. Questions breaker (Br), turning (Tru) and red ripe (RR) tomatoes. They also determined the amount of PME protein present by using a Western blot assay, which uses a specific antibody to detect the PME protein. The results are shown in Figure 12.1. What is your interpretation ofthese results? Transgenio ING MG Be Figure 12.1: PME protein levels (A) and activity (B) in wild-type and transgenic tomatoes. (Modified from Frenkel, et al. 1998.) Solution As given in A the protein level of PME is completely negligible in transgenic variety and present in wild type. In wild type variety the protein level in less in the IMG stage as compared to the subsequent stages this is because the expression of PME increases as the ripening of tomato increases. in fig. B : In the case of activity of the PME in the wild type variety increase is shown until it reaches the Tu stage and it starts decreasing in the fully ripening stage since the PME activity is not required to do the ripening. little activity in the transgenic variety is also shown because of the endogenous expression of PME because the PME is only altered not fully knockout.

Biochemistry homework Focus concept ripening fruit and the activity.pdf

bhim1213

A process that has its representative PCB in a device queue is in th.pdf

bhim1213

Which of the following statements is (are) true: I : Cash flow is about predicting when money will come in and will go out. II: Cash flow is not about making sure that there is enough money to pay your debts. Both statements are true Solution Answer: Both statements are false Explanation: Both the Statements are false because cash flow can be termed as total net amount of money being transfered into and out of business, specifically as effecting liquidity. So, Cash neither predicting nor making sure..

Which of the following statements is (are) trueI Cash flow is a.pdf

bhim1213

What is the relationship of the epithelium of the epidermis to the connective tissues layers of the dermis? Describe the boundary between the epidermis and dermis and the various types of connective tissues that compose the dermis. Solution Epidermis is a type of epithelium tissue containing typically thin sheets of cells. Epidermis forms the outermost layer of the skin containing 4 to 5 layers of epithelial cells.The outermost part of the epidermis is comprises of flattened cells in stratified layers overlying on a basal layer (stratum basale) made up of columnar cells arranged perpendicularly. Beneath the epidermis lies the middle layer called dermis layer. It is composed of dense irregular connective tissue and areolar connective tissue such as a collagen with elastin arranged in bundled and woven pattern. This layer comprise of the papillary and reticular layers. Dermis contains connective tissues, vessels, glands, follicles, hair roots and sensory nerve endings. This superficial paillary layer of the dermis, made up of areolar connective tissue like collagen and elastin fibers in a loose mesh, projects itself into the stratum basale of the epidermis to form finger-like dermal papillae. The dermis layer also consists of blood and lymph vessels and nerves, which end in epidermal layer and also hair follicles and sweat glands which project out through epidermis. Thus dermis is the layer of the skin between the epidermic and the subcutaneous tissues, primarily composed of dense irregulat connective tissue. These connective tissue provides cushions to the body from stress.Its area adjoining the epidermis is called as papillary region and the deeper area is known as reticular dermis. Dermis is tightly connected to epidermis through a basement membrane. Papillary layercomprising of mainly collagen, intewines with the rete ridges of the epidermis. Reticular layer consists of irregular connective tissue fibers, densely packed collagen, elantin and reticular fibers. Structurally, dermis comprises of collagen, elastic fibers and fibrillar matrix. It also provides the sence of touch, heat etc..

What is the relationship of the epithelium of the epidermis to the co.pdf

bhim1213

What is a linked list? What is a linked lists general syntax? Can you give me any tips on using linked lists or any extra general info I may need to know? Solution Linked Lists: It is a collection of data elements. A single linked list points to the next element of the linked list. A double linked list points to both the previous and next elements. For every node in the linked list, it has 2 parts - data and pointer Unlike arrays, linked lists are not stored at continguous location. As compared to arrays, linked lists offer dynamic size (we can add or delete elements from the linked list easily). A disadvantage as compared to arrays being, random access of the element is not possible in a linked list. General Syntax in C: //node struct node { int data; // data element struct node *next; // pointer to next element } Best way to learn linked lists is to implement the data structure along with some basic operations on it: Inserting an element (at the start, at the end, at the middle), Deleting an element (from the start, from the end, from the middle), Counting the number of elements etc..

What is a linked listWhat is a linked lists general syntaxCan .pdf

bhim1213

What is the output of running class GenericMethodDemo of the following code? public class GenericMethodDemo { public static void main(String[] args ) { Integer[] integers = {1, 2, 3, 4, 5}; String[] strings = {\"London\", \"Paris\", \"Dhaka\", \"Austin\", \"Sydney\"}; GenericMethodDemo.print(integers); GenericMethodDemo.print(strings); } public static void print(E[] list) { for (int i = 0; i < list.length; i++){ System.out.print(list[i] + \" \"); } System.out.println(); } } What is the output of running class GenericMethodDemo of the following code? public class GenericMethodDemo { public static void main(String[] args ) { Integer[] integers = {1, 2, 3, 4, 5}; String[] strings = {\"London\", \"Paris\", \"Dhaka\", \"Austin\", \"Sydney\"}; GenericMethodDemo.print(integers); GenericMethodDemo.print(strings); } public static void print(E[] list) { for (int i = 0; i < list.length; i++){ System.out.print(list[i] + \" \"); } System.out.println(); } } Solution output 1 : London Paris Dhaka Austin Sydney The above is the output of hte above program.

What is the output of running class GenericMethodDemo of the followi.pdf

bhim1213

What is the compensation depth for phytoplankton? How does it differ from the critical depth? Solution Planktons are two types phytoplanktons and these are weakly swimming and free floating microalgae and photosynthetic whereas zooplanktons are fast swimming and feed on phytoplanktons. The compensation depth for phytoplankton is mainly useful to denote the growth of phytoplankton blooms and it is defined as the depth at which the net growth rate of phytoplankton is zero. The compensation depth of phytoplankton bloom is 0.1 to 1% (above this depth population grows) where solar radiation is going to reach adequately for their survival. The critical depth is defined as the critical depths is differ from it in which the phytoplankton biomass cannot grow adequately after a certain depth interval.

What is the compensation depth for phytoplankton How does it differ .pdf

bhim1213

More from bhim1213 (20)