1. ADDRESS
Pakistan Address: - House No.6 St No.5 A Block Alfasisal Town Tajpuara Lahore Cantt, Tehsil Lahore
Cantt,District Lahore Pakistan.
PROFILE
CAREER OBJECTIVE
Career Summary
To work in a highly motivated and professional working environment with
opportunities of continually professional development while utilizing my
knowledge and string leadership and communication skills in a productive
manner. I am very much interested to take challenges in real time projects and like
to contribute for the growth of your organization.
08 years rich experience in oil and gas industry EPC Contractors for QA/QC and
Inspection activities like welding inspection of Piping and Steel Structure,
Nondestructive testing, hydro testing and Mechanical Completion walk through
for Piping & Pipelines, Refineries, and Oil & Gas plants/facilities.
Extensive experience in Fabrication, Erection, Inspection and testing of
Mechanical construction, Inspection and evaluation of piping, equipment such as
Boilers, Exchangers, Columns, Drums, Storage Tanks and Heavy Steel Structure
in industrial plants and Oil Refinery. Good team player and use own initiative to
achieve company objectives. Use my own initiative to build strong working
relationships with colleagues, clients and contractors. Carry out audits on sub-
contractors’ and construction works, identify non-conformances and advise areas
to improve quality of works. Hands on experience in different materials like CS,
LTCS, SS, Alloy, GRE/GRP
MUHAMMAD QASIM
(QA/QC Inspector)
Contact
CELL# +92-333-4852893
UAE : +971-056-9195223
E-mail :
Qasimmughal62@yahoo.com
Qasimmughal34@gmail.com
2. CERTIFICATIONS / TRAININGS
ASNT Level II in PT, MT, RT, UT, RTFI,VT
Safety Induction
OSHA 10Hour Program
IIF Incident Injury Free Training Program
02 days in-house training on Hardness Testing at IGD Process Plant
Introduction to Health, Safety & Environment.
Life Saving rules.
Working at Height.
Confined Space & Hole Watch.
Heat Stress.
Lifting & Rigging Awareness.
Permit to Work. (PTW)
Emergency Response.
EDUCATION
Bachelor Degree from Punjab University Lahore.
2006-2008
Matric (Science)
2003-2004
Codes & Standards:
Good knowledge of following codes and standards related with Oil and Gas field.
ASME B 31.3
ASME Section IX
ASME Section VIII
ASME Section V
ASME Section II
3. WORK EXPERIENCE
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector (Boruge II PO Flare Recovery Project) – UAE
08 July 2015 to Date
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector (Takreer Refinery Turnaround 2014) - UAE
Dec 2014 to July 2015
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector (Takreer Refinery Turnaround 2014) - UAE
Sep 2014 to Dec 2014
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector (Takreer Refinery Expansion Project) - UAE
Mar 2013 to Aug 2014
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector (IGD-5 Process Project) - UAE
April 2011 to Jan 2013
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector Gasco Habshan Long Term Shutdown At BAB Gas Plant- UAE
Dec 2010 to Mar 2011
DESCON ENGINEERING ABU DAHBI
QA/QC Inspector (Takreer Refinery Turnaround 2010) - UAE
Sep 2010 to Dec 2010
DESCON ENGINEERING ABU DAHBI
NDT Inspector Offshore Associated Gases Project Packge 1 Das Island) - UAE
May 2009 to Apri 2010
DESCON ENGINEERING ABU DAHBI
NDT Inspector Asab Gas Devlopment Phase ll Project - UAE
Jan 2008 to Feb 2009
4. Responsibilities as QA/QC Inspector
Perform Incoming Material Inspection verifies MTCs according to Code, Project Specifications and
Applicable Standards.
Ensure handling, & storage of Materials in accordance with Project Specifications and Approved
procedure as Agreed with Client .
Monitor all welding activities during execution and erection, and final inspection with client.
Co-ordinate in preparation & Implementation of Inspection Test plain (ITP), as per applicable code
and Project Specifications.
Preparation and execution of WPS and PQR as per project requirements.
Witness of Destructive and Non-Destructive tests for approval of WQT, WPS and PQR.
Ensure that all inspection & tests are carried out as per approved ITP, Method Statements and
Procedures.
Co-ordinate with Client QC to prepare Pretest Punch list & posttest punch list.
Coordinate with FEDC department for any Engineering issues & as built work.
Coordination with NDE group to carry out PT, RT, UT, MT.
Highlight all process/product non-conformities through CARs/NCRs and follow up for closing.
Review & Monitor Calibration frequency & certificates of Instruments used at site.
Manage & Coordinate Quality Awareness Campaign to create & sustain Quality Culture at Site.
Conduct Quality & Flawless Startup Initiative Tool Box & Training.
Maintain day to day filing and quality record according to approved ITP.
Prepare MDR (Manufacture Data Record) as per approved MDR Index & Finally Submit to Client.
Witness of PWHT & PMI.
Fit-up Inspection of welding joints of CS, SS piping.
Welding Inspection before, during and after welding CS, SS, Duplex piping.
Monitoring of daily Welding Progress report.
Daily Fit up& Welding Reports as per Client requirement.
Coordination for Test package Preparation.
Inspection of Hydro testing, Flushing &Air Blowing.
Preparation of Hydro Test Packages. Pneumatic test reports
Updating of NDT and control sheet for welding record
Final Inspection of different kinds of structural material and erection.
Sub- Contractor’s Billing Verification. NDT and all other QA/QC reports
Take ownership of company’s QHSE Policy, Core & Operating Values, and ensures their implementation.
Inspection of bolt torqueing and tensioning
As NDE Coordinator:
Radiograph film interpretation and organization of all NDE activities as per Standard requirements.
Establishment of a system to control the project repair rate and monitoring of welder performance.
Review of RT, DPT, PWHT and Hardness Reports.
Identify repair and re-inspect with NDT after re-welding the joints.
UT Gauging & UT Scanning of pipe & plates weld joint.
Monitoring day-to-day record of all films.
Submission of all NDT record to Client as per approved Procedure and requirement.
SKILLS
MS Office
ITS (Inspection & Testing System)