DLW Internship report

1. SUMMER TRAINING PRESENTATION
NO

2. CONTENTS
• INTRODUCTION OF DLW
• Scope of “civil engineering” in DLW
• STP PLANT (Sewage/Sludge Treatment Plant)
• Hort (Horticulture)
• CVL.DRG (Civil Drawing)
• BRI (Bridge Reconstruction)
• WT (West Township)
• ET (East Township)

3. INTRODUCTION OF
DIESEL LOCOMOTIVE WORKSHOP
Diesel Locomotive Works (DLW)
is production unit under the
ministry of railway. This was
setup in collaboration with
America locomotive company
(ALCO) USA in 1961 and the
first locomotive was rolled out
in 1964. This unit produces
diesel electronic locomotive
and DG seta for Indian railways
and other customers in India
and Abroad.

4. Scope of “civil engineering”
in
DLW
• STP PLANT (Sewage/Sludge Treatment Plant)
• Hort (Horticulture)
• CVL.DRG (Civil Drawing)
• BRI (Bridge Reconstruction)
• WT (West Township)
• ET (East Township)

5. STP PLANT (Sewage/Sludge Treatment Plant)
Sewage treatment is the process of removing
contaminants from wastewater, including
household sewage and runoff (effluents). It includes
physical, chemical, and biological processes to
remove physical, chemical and biological
contaminants. Its objective is to produce an
environmentally safe fluid waste stream (or treated
effluent) and a solid waste (or treated sludge)
Suitable for disposal or reuse (usually as farm
fertilizer).
DLW SPT Plant Waste Water Storage Capacity:-12
MLD

7. Hort (Horticulture)
INTRODUCTION
• The science and art of cultivating flowers, fruits,
vegetables, turf and ornamental plants in an
orchard, garden, nursery, or greenhouse, on a large
or small scale.
• Horticultural – An adjective used to describe
something relating to horticulture, or produced
under cultivation.

8. CVL.DRG (Civil Drawing)
INTRODUCTION
• The term CAD (Computer
Aided Design) applies to a
wide range of programs that
allow the user to created
drawings, plans, and designs
electronically. AutoCAD is one
such program and it main
claim to fame is that it is
relatively easy to use, it is very
comprehensive in its ability to
create 2D and some 3D
drawings, and it is very
popular. Seventy percent of
the CAD users in the world use
AutoCAD.

9. BRI (Bridge Reconstruction)
INRODUCTION
• Developed the reconstruction
practical knowledge of railway
track, bridge etc.
• The branch of civil engineering
which deals with the design,
construction and maintenance
of the railway track for safe and
efficient movements of trains is
called Railway Engineering.
Track component

11. WT (West Township)
ET (East Township)
• Developed the reconstruction and construction
practical knowledge of railway plans, building etc.
• In the both department working are same, just like
repairing the railway building blocks, working on
new project in DLW, construction the new building
in Indian railway colony.

12. FOUNDATION
• The foundations of the
building transfer the
weight of the building to
the ground. While
'foundation' is a general
word, normally, every
building has a number of
individual foundations,
commonly called
footings. Usually each
column of the building will
have its own footing.

13. Form works in building construction
• Formwork is an ancillary
construction, used as a mould
for a structure. Into this
mould, fresh concrete is placed
only to harden subsequently.
• Designs of these temporary
structures are made to
economic expenditure. The
operation of removing the
formwork is known as stripping.

14. Column construction works
• Column is constructed with the
help of steel bars and cement
concrete. In case of multi storey
and frame structure building
constructions, the entire load is
born by columns and the floor
area/ internal space of building
is freely adjusted according to
the requirement.

15. ANY QUERY?