Latest RK V-CV -

R.K.VICHARE
(Gavali Chawl,C/O.D404,Dhanlakshmi Appartment-1,Opp. Lokgram Rly.Ticket Booking Office,Kalyan €PIN 421306)(M)09869679123)
RESUME
FULL NAME NAME : Ramchandra Kisanrao Vichae
“e”mail id: : <vrefinery.freelines2016@gmail.com>/projects.vicharer@gmail.com
LOCATION : Mumbai-India.
Last EMPLOYMENT : International Inspection Services-Hyderabad-India
Last DESIGNATION : Sr. Manager
LANGUAGE : English, Hindi, Marathi.
EDUCATION : DME in the Yea 1982-83 / Old S.S.C. with Special subject
having Physics- Chemistry & Civics
QUALIFICATION : American Society Non-destructive Testing NDT Level II In ( UT, RT, PT,
MT)
Experience : Yrs. 29 +
Over 29 Years of Experience as a Production /Inspection & Quality Control/ Expediting Engineer in
Chemical/Petrochemicals/Power Plant /Bio-Tech Industries/Lift Irrigation Scheme/Rolling Mill/API line
pipes/Inspection of Machining items /Pipe Coating (i.e. PU & 3LP)/Inspection of Rubber lining of Storage
Tanks/Desalination Plant/Inspection of FEP Lining ;Lead lining of Storage Tanks/Inspection of various type of
Valves & Pumps/Inspection of Painting / Inspection of Piping; Dished Ends; Pipe fittings ;Torricons; Cement
lining/Shut-down Inspection/ Stages of inspection of Piping /Piping spools & Fabricated Heavy Structure
Inspection including all refinery piping; Power plat stage to final inspection; review of ITP/QAP etc As well as
Project Co-ordination. Having sound knowledge of NDT like RT/UT/DPT/MPT, Floroscopy & Boroscopy.
Familiar with relevant manufacturing processes, codes and standards such as ANSI series, API Stds, ASME
series, ASTM series, ASME B31.3, TEMA,EN BS series, IBR, AWS D 1.1 IS series etc.
Procedures for physical/mechanical testing, NDT Testing and Evaluation, Preparation and approval of
various testing procedure for Static equipment’s, Rotatory Items, Control Valves, Structural International
clients specifications and procedures
Experience Profile :
Inspection professional in the fields of Chemical, Petrochemical’ Bio-tech Industries; Power plant
industries; Coating ;Pumps /Valves Industries etc.
Power plant related items:
Boilers main drum, Heat Exchangers, Coolers, De aerators, Economizers, Super heaters and their piping, Storage tanks,
Top and Bottom headers, Economizers, Air Jet Ejectors, Condensers, Boiler main Columns, ID FAN, HP Fluidizing air
fan, VACCUM PUMP, DRIP PUMP, Dosing Pumps, Lube oil line flushing of turbine, Boiler feed pump, Primary air
fan, LP heater, Hp heater, De aerator tank, CST tank & MOT lube oil tank, Piping, Air Filters, All control valves and
related Instruments, ESP total packages, Wall bunkers, PDP panels, Silos, hoppers, Total Coal Handling system, Cooling
Towers, Spherical storage vessels, Re boilers, Fire fighting items sprinkler systems and Hydrant systems.
Rotating Equipment’s:
Blowers, Pumps, Agitators, Conveyors, Couplings, Turbines, Rotary Airlock Valves,
Scope of Work:
(a) To check availability of approved drawings/procedures/data sheets etc.
(b) To verify Material availability as per PO/Tech. data sheet & Approved Drawing.
(c) To verify stages of inspection up to total assembly documents as per approved ITP/QAP.
(d) Review and Verification of welding procedures (WPS, PQR, WPQR)
(e) Review and verify the qualification certificates of NDT and other Testing personnel.
(f) To verify the markings/ Cutting layout of various items with respect to the drawings.

R.K.VICHARE
(g) Review and verification of material traceability report of the materials
(h) To witness/review the forming/ rolling like dished ends, cones, shells.
(i) Review/witness the Heat Treatment reports.
(j) Witness the fit-ups with respect to the part drawings/GA Drawings.
(k) Witness/Review of Non-Destructive Tests after final welding.
(l) Visual and dimensional checks stage/final.
(m) Witnessing of Final mock –up assembly as per the GAD and Protocol
(n) Witnessing the pressure tests such as Hydro static test, pneumatic test, as per the data sheets and approved
procedure.
(o) Witnessing of FAT. Performance Test and MRT as per the approved data sheets , procedures, Proposed curves
at different flows.
(p) To verify/witness surface preparation and coating.
(q) To verify the preservation and stuffing.
(r) To issue NCR (where necessary) and to follow-up to close the same with proper explanations/clarification
from vendor in time .
Control Valves:
Butterfly valves, Ball Valves, Gate Valves, Needle, Safety relief valves, Globe Valves, Plug Valves,
Diaphragm Valves, Choke Valves.
Scope of Inspection:
1. Inspection of Raw material with respect to the Approved Drawings, Technical Data sheet , project
specifications.
2. Review and verify all the procedures required for manufacturing.
3. Verification of welding procedures (WPS, PQR, WPQR)
4. Review and verify the qualification certificates of NDT and other Testing personnel.
5. To verify the markings of various parts with respect to the drawings.
6. Reviewing the stage assembly records.
7. Final visual and Dimensional checks.
8. Witnessing of the pressure tests like Body hydro, Seat hydro, Seat Pneumatic test.
9. Witnessing the performance test.
10. To verify/witness surface preparation and Painting inspection as per approved Painting /Coating
procedure.
11. To verify the preservation and stuffing.
Structural Items:
Boiler Columns, Girders, Bunkers wall Panels, ESP Components, Stacks, Trusses, Trestels, Material handling
systems, Bracings/Tie Beams.
1. Inspection of Raw material with respect to the drawings, specifications, project specifications.
6. Review/witness sub-assemblies.
7. Witness the mockup test.
8. Witness of necessary NDT activities
10. To verify/witness surface preparation and Painting./ coating.
Expediting:
Expediting of Pressure Vessels, Control Valves, Structural, HVAC, and Static Equipments, Super
Structures, Boiler structures, etc.

R.K.VICHARE
Scope of expediting:
1. Verification all the reference Preliminary documents such as Purchase Order, ITP/QAP, GAD, P&ID
and Materail Requisition if any.
2. Ensuring availability of Approved Test Procedures/Drawings as well as code & standards are
available with vendor , if not, same to be arrange to provide vendor before commensing
manufacturing activities.
3. Verification of avalibality of all the Material with respect to the drawings/ BOM /PO with supplier.
4. Non available materials follow up with vendor/sub vendor and same will ensure the availability for
assembly whenever required.
5. Follow of for the miles stones as per the manufacturing schedules and ensuring whether
manufacturing has taken in accordance with the manufacturing schedule or not. If not,
day to day surveillance will be done and the status will be verified with respect to the manufacturing
schedules. If schedules are not meeting, the same will be discussed with manufacturing team and
ensure to finish the with next day schedules.
6. To ensure and complete the items as per the Bar chart/ PO delivery dates.
EXPERIENCE DETAIL:
1)Last/Earlier Employment:
Organization : M/s. Indian Inspection Services, Hyderabad.
Period : Since 1st
May’2012. To 31st
Oct’2016
Designation : Sr.Manager (Inspection & Expediting)
Inspection & Expediting of the following Equipment in surrounding Mumbai and Throughout India.
 From1st
May’2012 to 31st
Oct’2016 worked as a Sr. Manager(Inspection) with M/s. Indian Inspection Services-
Hyderabad-Mumbai Zone; where I look after all “TPI" inspection activities including work entails supervision
and inspection of Pressure vessels, Columns; Reactors, Boilers; Power Plant , Tanks, Laded Vessels ; Process
Piping Systems ;Shell & Tube Heat Exchangers; Receiver ; Rubber lining/ FEP Lining /Valves; Pumps; Power
plant equipment; Bought out items such as Flanges; fitting Various type of pumps ,various type of castings,
safety relief valves, line pipes, bolts, nuts, Gaskets; Packing inspection ,Painting Inspection as well as carried
out expediting at various places for following Equipment in and around Mumbai//Gujrat State such as Boilers,
storage tanks, dished ends, various type of valves ; various type of pumps, Heat Exchangers;Gas cylinders,
columns, cladding plates, cladded vessels, ESP Items etc.
EQUIPMENT EXPERIENCE :
Pressure vessels, SKIDs, Various type of Valves (i.e. Gate Valves / Ball Valves/ Pressure Safety Valves; Thermal safety
valves) & Pumps.
Refinery Piping Inspections
Heat Exchangers;
Columns
Horton Sphears & LPG Bullets.
Desalination plant;
Bio-tech process equipment.
Welder Qualifiction.
Fix Roof & Floating Roof storage tanks
Heavy Structure fabrication.
WITNESS ACTIVITIES:
Stage to final inspection activities as per ITP/QAP; Procedures approved by Client.
Familiar with relevant manufacturing processes, codes and standards such as ANSI series , API Stds, ASME series,
ASTM series, Review & Approval of Procedures.
 Worked with (*)
1) From 2004 to April’ 2012 worked with well known PMC Co. namely M/s.JACOBS ENGINEERING INDIA

R.K.VICHARE
(PVT) LTD .,Delhi & Mumbai. where I Look after Project job Inspection activities as noted below:-
 W orked as a Sr. Inspection Engineer for HPCL-Mahul (Project No,44LK5100) DHDT & DHT project where
Contractor/ LSTK – Vishal Enterprise ,L&T, IOTL, ,Toyo India, Linde Engg. Where over all responsible for
shop floor Inspection activities such as Identification of Raw Material, Review of total documents/Approval of
Line History Sheet./ Approval of QAP/ Approval of Procedures, Welder Qualifications, Stages of inspection of
Process Equipment/ Storage Tanks/Piping up to Final Inspection Documents; Inspection of Flanges; line pipes,
fittings; Inspection of Piping spool ; Painting inspection of Piping spools; etc & Expediting..
 Worked for MRPL-Manglore (Project No.44KK2800)/ ,Pfizer Project-Mumbai LSTK-Onshore where
responsible for Raw material identification & Structure Fabrication work/Welder Qualification and Inspection
of Refinery Piping etc..
 Dhirubhai Ambani Life Science Centre (Rablale- Navi- Mubai) BIO-TECH project (cGMP2) in the year
Aut’2006 to Sept’2007 where attended stages of inspection including weld Boroscopy.
 Questar Gas Management Co.-USA at Jindal Saw Ltd.-Mundra-Gujrat from 1st
Oct’2007 to Feb’2008 as a
Auditor/Clients representative where was responsible for Creating and mentening MTR Index as well as over
and above responsibilities than TPI for their API 5L Line Pipe Project.
 India Glycols Ltd.-Kashipur, Uttarancha-Shut-down & Project Expansion for CGMP in the Year 2004 & April
to May’ 2011(Project No.44NK3700) Worked as a Sr. Inspection Engineer where attended Piping inspection
during expansion of Project at Kashipur-Uttaranchal
 During Associated with TUV-(SUD) India Pvt. Ltd.-Hyderabad (worked for short period) as a Manager
(Industrial Services) for the Project Div.1,Stage I&II for Package No.25 Alisagar Lift Irrigation Scheme-
Nizamabad (i. e .for A. Govt. of Andhra Pradesh) where L&T-Chennai was a LSTK; where I look after total
Project Inspection & Expediting.
2) During Associated with IDEA Chennai & Moody International India Ltd-Mumbai Branch;
 i)Attended 3rd
Party Inspection of API5L X70 DWSAW Pipe for Manta Ray Gattheing Co.LLC-America and
ALPASO as well as Dove Chemicals- America.
 ii)Attended third party Inspection of Pipe Bends Manufactured by Induction Bending Process as well as 3LP &
PU Coating for pipes & Bend on behalf of ITI Anticorrosion-America at M/s.Welspun Gujrat Stahal Roherine
Ltd.-Bharuch -Gujrat state. As well as API 5LX70 Gr.65 HSAW Main Line Pipe (PSL2) to M/s.Indiaon Oil
Corporation Ltd. For their Panipat Refinery Expansion Line Pipe Project at M/s.PSL- Gandhidham-Gujrat
State.
3) During Associated with Industrial Quality Circle Pvt. Ltd-Mumbai.:-
 a) Attended third party Inspection on behalf of Larsen & Toubro Ltd –Mumbai & Hazira such as Pressure
Vessels, Dished Ends, Torrecon,, Heat Exchangers and Raw Material Inspection.
 b) Attended Technical Audit of “Floating Roof Tanks at M/s.Bharat Petroleum Ltd.-Rajamundry(A.P.) / Gujrat
Refinery Ltd.-Baroda as well as IOCL-Haldia-Cultta.
4) During Associated with Safess Quality Management Pvt.Ltd.-Mumbai:-
 1)Attended Shop Stage Inspection at M/.s. Tata Chemicals.Ltd.-Mithapur, Okhamandal, Saurashtra –
Gujrat.State in the year’1996-1997..
 2) Attended third party Joint Inspection with RDSO-Calcutta (i.e.around 400 Nos. Railway Wagons for LPG) at
M/s.Simco Birla Ltd.(Heavy Engineering Division)Bharatpur-Rajesthan.
 3) Attended shut-down Inspection of Horton Spheres & LPG Bullets at HPCL-Nagpur, Chennai Petrochemicals
Ltd.-Chennai./Manglore Refinery –Manglore, Deepak Fertilizers-Taloja as well as BPCL-Botteling Plants
through out India (i.e. Manglore, Barellie, Lalru-Punjab, Solapur etc.).

R.K.VICHARE
5) During Associated with TIL-Limited-Navi Mumbai/Medore Equipments-Mumbai/Space Tech Eqpt.-Mumbai.,
 .Handled Fabrication of Chemical & Petrochemicals Process Equipment. Stage Inspection to Final Inspection
Documents for LRIS/BARC/PPED/BV/UHDE India & H&G.
Employment History: (chronologically starting with Present Employment first)
NAME OF THE EMPLOYMENT DESIGNATION WORKING PERIOD
Internal Inspection Services (P) Ltd.
(formarly known as Indian Inspection
Services).
Sr.Manager(Inspection &
Expediting).
Since 1st
May2012.
Jacobs Engineeering India Pvt.Ltd.-Delhi &
Mumbai.
Sr. Inspection Engineer From April’2004 to April’
2012
IDEA-Chennai/Mumbai Inspection Engineer 09/09/2001 to 31/03/2004
TUV (Sud) –Hyderabad Manager (Industrial Services) Short period (6Months)
Moody Internation (I) Pvt Ltd.-Mumbai. Inspection Engineer 23/07/2001 to 31/012/2001.
Safess Quality Management Pvt.Ltd.-
Mumbai
Inspection Engineer 2/02/1996 to 1/10/1998 &24/10/1998 to
April’2001.
Industrial Quality CirclePvt.Ltd.-Mumbai. Inspection Engineer.
01/11/1997 to 19/9/1998 & Feb2002 to
Aug’2002
Lloyds Steel Industries Ltd.-Murbad. Fabrication Contractors for
Pr.Vessels ,Steel Plant
Equipments &
Structural Fabrication.
22/06/1994 to 16/10/1996.
Space Tech & Structurals Pvt.Ltd.Mumbai
(Ambernath Works)
Inspection Engineer 05/01/1993 to 09/06//1993
Medore quipment Pvt.Ltd.-Mumbai. Shop Supervisor cum
Inspector
1/07/1992 to Dec’1992.
TIL-Limited-Navi Mumbai. Asst.Engineer(Inspection &
QC Dept.)
Sept’/1982 to June’1992
Summay of skills
Experience with the following equipment (not limited to):
(a) Pressure Vessels.
(b) Heat Exchangers
(c) Reactors.
(d) Desalination plant.
(e) Pumps
(f) Various type of Valves
(g) Pipe fittings (i.e. flanges ;Reducers, bends, elbos,
veldolets ,Elbolets etc.).
(h) Piping-Refinery Related:–
Processing Piping & Heavy Structures ; kids
(i) BIO-TECH – Process Piping & Process Equipment.
(j) Dished Ends,
(k) Horton Spears.
(l) Various type of Level Gauges ;
(m) Pressure Gauge Calibrations
(n) Coating 3LP & Pu
(o) Painting inspection

R.K.VICHARE
(p) Led ling ;Rubber ling ;PTF lining
(q) Blower.
(r) SRV & Thermal safety valves
SUMMARY OF MAJOR FUNCTIONS AND RESPONSIBILITIES
1) While worked with INTERNATIONAL INSPECTION SERVICES-Hydrabad.
(a) Review/ verify status of approved documents (i.e. Drawings/ Procedures;/ITP/QAP etc.)
(b) To verify availability of Raw Material with respect to the Approved Drawings/ Project specifications.
(c) Material Identification as per Approved Drawing/P.O (i. e Review and co-relation of MTC with Marking
on raw material (i.e. plates/pipes/pipe fittings etc.).
(d) Welder Qualifications and to issue welder Card.
(e) Verification of welding procedures (WPS, PQR, WPQR).
(f) To verify whether Electrodes using according to approved WPS/PQR /Storage /Preheating of electrodes
at the time of welding.
(g) To Attended Stages of Inspection as per Approve ITP (i.e. During Fab. Stages: Material identification ;
Inspection of D/End after Forming/ Shell to shell and Dished End to shell L/S set-up-/L/S .B/C & B/C.
DPT/ RT / Nozzle Orientation Marking & release for opening and Nozzle fit-up.)
(h) Visual Inspection after Final Welding and released for PWHT.
(i) To witness/Review of NDT before & after PWHT (After PWHT if required only ).
(j) Final Dimension Inspection as per Approved GA Drawing and release for further activities..
(k) To verify calibration of Pressure Gauges used for testing.
(l) To witness Hydro test/Pneumatic test as per Approved Procedure.
(m) To witness (where applicable) painting inspection as per Approved Painting Procedure/Review of
Painting Inspection Report ; to review instruments calibration certificates..
(n) Issue of IRN.
2) While worked with JACOBS ENGINEERING INDIAPVT.LTD.
As Worked as a PMC Sr. Inspection Engineer, fully responsible for Project assigned by the Management
where I look after following Inspection Activities:
i) Co-ordination both with Project team and Vendor/sub-vendor.
ii) To check availability of Approved documents with vendor/sub vendor including P.O.
iii) To check availability of Raw Material according to approved drawing/Tch. Specification.
iv) To check Manpower assign on our Job such as QC Engineers/qualified welders/grinders etc.
v) To check availability of Consumable items.
vi) Welder qualification and to issue I.D. Cards to individual Qualified Welders.
vii) To check a copy of WPS/PQR available in welding area or not,
viii) To attend stage of Inspection as per Approved QAP/ITP (i. .e .Material Identification ;Fit-
up/D/End Inspection /NDT/ Weld Visual etc. to till completion of Painting and to give IRN.
ix) To follow-up NCR (if any) and to close in time prior to completion of Inspection activities.
x) To review Radiography films and to witness UT/MPT & DPT where required as per approved
QAP/ITP.
xi) To verify final Inspection documents submitted by vendor after completion of Total Job activities
prior to Hydro testing including PWHT Chart(Where necessary)..
xii) During working for BIO-Tech Industries, at Dirubhai Life scince –Navi Mumbai , India fully
responsible for Tubs –spool total inspection up to erection including weder qualification/weld
visual and Boroscopy of individual spool. .
3) While worked with TUV (SUD) –Hyderabad-Nizamabad Water irrigation Project of Govt.of Andra Pradesh.
Responsibioities:
i) Fully responsible for stages of inspection with Tm members.
ii) 3 Mtr. Depth Underground 2.5 Mtrs Ø pipe laying & fit-up inspection.
iii) Weld visual and NDT like UT;MPT & DPT.
Visual & dimension inspection of pipes (i.e. length/dia/ovality/ straightness (where accessible )at-Nizamabad

R.K.VICHARE
(i.e.for A.Govt. of Andhra Pradesh) where L&T-Chennai was a LSTK..
Whie worked with IDEA Chennai & Moody International India Ltd-Mumbai Branch;
Safess Quality Management Pvt.Ltd./Industrial Quality Circle Pvt.Ltd.
For shut down Job:
To make arrangement of manpower/ arrange for work permit/ to control on safety issue/scaffolding inspection etc.
Fully responsible for NDT inspection. (i.e.RT/UT/MPT/DPT).
To complete work in time in all respect and to handover to Client..
(a) For shop flower inspection: Review/ verify status of approved documents (i.e. Drawings/
Procedures;/ITP/QAP etc.)
(b) To verify availability of Raw Material with respect to the Approved Drawings/ Project specifications.
(c) Material Identification as per Approved Drawing/P.O (i.e Review and co-relation of MTC with Marking on raw
material (i.e. plates/pipes/pipe fittings etc.).
(d) Welder Qualifications and to issue welder Card.
(e) Verification of welding procedures (WPS, PQR, WPQR).
(f) To verify whether Electrodes using according to approved WPS/PQR /Storage /Preheating of electrodes at
the time of welding.
(g) To Attend stages of inspection as per Approve ITP (i.e. During Fab. Stages: Material identification ;
Inspection of D/End after Forming/ Shell to shell and Dished End to shell L/S set-up-/L/S .B/C & B/C. DPT/ RT
/ Nozzle Orientation Marking & release for opening and Nozzle fit-up.)
(h) Visual Inspection after Final Welding and released for PWHT.
(i) To witness/Review of NDT before & after PWHT (After PWHT if required only ).
(j) Test witness as per approved ITP/QAO (i.e.Hydro test; Pneumatic test;etc.)
(k) Reviewe of final inspection documents and to issue IRN.
During associated with TIL Ltd.-Mumbai
 Responsibilities
 To keep up date record of Approved documents.
 Inspection of Dished Ends,
 To attend inspection at sub-vendors works.
 Verification of bought out items/ Raw materials respect to Approved drawing/P.O /technical specification.
 Witness of stages to final inspection documents.
 To up date records of NCR issued by TPI and to close the same in time.
 To prepared final inspection documents and to submit to TPI .
.Control Valves:
Butterfly valves, Ball Valves, Gate Valves, Needle Valves, Pinch Valves, Reducing Valves, Safety relief valves, Globe Valves,
Plug Valves, Diaphragm Valves, Check Valves , flow meters, Dial gauges, Venturi meters, Metering Skids, Injection
moulding fittings,measuring instruments etc
1. Inspection of Raw material with respect to the drawings, specifications, project specifications.
6. Reviewing the stage assembly records.
8. Witnessing of the pressure tests like Body hydro, Seat hydro, Seat Pneumatic test.
9. Witnessing the performance test.
10. To verify/witness surface preparation and Painting/ coating.
11. To verify the preservation and stuffing.
Projects Handled for Various Equipments are as noted below and as noted above (*):
Sr. Client Project Items Inspected

R.K.VICHARE
No.
1 Citgo Petrolieum SA
Flare Ja Compliance -
2086501
Knock Out Drums, Liquid Seal Drums, Risers &
Stair Tower.
2
Hyundai Engineering &
Constuction Co.
Satah Al-Razboot Field
Development Project –
SARB4
Anti Surge Valves & Waste Heat Recovery Unit.
3
Petroleum Development
Oman / Arabian
Industries.
Fuel Gas supply and Teatment
package
Ball Valves
4 DOW Chemicals USA Gulfstream MSP LHC-9 Ball Valves
5 Daelim Saudi Elastomer Project
Tail Gas Boiler – Steam Drum, Evaporator
Assembly, Steam Collecting Header, Super
Heater coils HPSH, , Economizer Assembly, ,
Exhaust Gas Ducting, Tail Gas Ducting, Natural
Gas Piping & Pilot gas Piping Within Skid,
Economizer Base Frame, Boiler Base Frame,
Stack, Blow Down Valves.
Truck Loading / Unloading Arms.
6 Daelim
Umm Wu’al EPC Project,
Ammonia Plant
Auxiliary Boiler - Water Drum, Steam Drum,
Eco to Stack Duct, Boiler to Stack Duct, Boiler to
Eco Duct, Boiler Base Frame & Stack
7 Clough, Australia Clough, Australia Various types of Valves
08 DSME
Maersk CJ70 Jack Up Project
– H3305.
Sub Sea Mud Gate Valves
09 DSME Odfjell Rig 3 GVAC7500 Sub Sea Mud Gate Valves
10
Seven Stars Oil Fields
Equipments
Pardis 3rd
Uria & Ammonia
Project
Variable Nozzle De-super Heater
11
Energy Industries Engg. &
Design Co.
Arvandan Oil & Gas
Company.
Control Valves
12
Persian Gulf Star Oil
Company
BAGCR, Iran. Various types of Valves
13
D F Power Systems Pvt.
Ltd.
1X27MW DCB Power
Ventures Ltd
Condensate Pumps, Vessels & Air Blower
(Centrifugal).
14
T D Power Systems Pvt.
Ltd.
APK Green Energy, Thailand. Lube Oil systems.
15 Gulf Flour Fluorine Complex GFO1
Pumps
RO (Reverse Osmosis) Unit
UF (Ultra Filtration) Unit
16 Simon Carves
Gulf Flour, Sulphuric Acid
Plant
Pressure Vessels, Plate Heat Exchangers, Pumps
& Valves.
Hope you may full fill with my field experience referred above.
RK VICHARE
(M) 0986967923

Latest RK V-CV -

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (12)

Similar to Latest RK V-CV -

Similar to Latest RK V-CV - (20)

Latest RK V-CV -