The document outlines the planning, analysis, design, and conclusion of designing an apartment building according to National Building Code norms. It describes using manual and software methods to plan the building layout and analyze the structure. Reinforced concrete design of structural elements was performed using Indian Standard Codes for limit state design. In conclusion, the building plan, analysis, and design satisfied all code requirements.

1. INTRODUCTION
A building should be planned to
make it comfortable, economical and to meet
all the requirements of the dwellers. The
efforts of the planner should be obtain
maximum comfort with limited available
resources. Functional utility, cost and comfort
should also be considered in planning a
building.

2. OBJECTIVE
To plan the building as per NATIONAL
BUILDING CODE norms and analysis by
using
1. Manual Method = Substitute Frame
Method
2. Software Analysis = STADD PRO

3. IS code Used For Design
 Designing as per I.S codes
1. I.S - 456 2000
2. I.S-875 Part-1(D.L)
3. I.S -875 Part-2(L.L)
 Estimation as per PWD norms

4. Specification
Plinth Area = 4840 sq.ft
Total Building Area = 5200 sq.ft
Bed Room = 12’*12’ft
Bed Room = 12’*12’ft
Kitchen Size = 13’ *10’ft
Hall Size = 18’*12’ft
Dining Hall = 13’*10’ ft

5. METHODOLOGY
 PLANNING
 ANALYSIS
 DESIGN

6. DESIGN AND ANALYSIS

9. CONCLUSION
• The plan of the building has been done as per NBC 2005.
• Plan, elevation ,cross section views, beam layout, column
layout, Slab orientation are drawn using autocad.
• The analysis of the structure is done by stadd-pro.and the
results are plotted.
• Based on the analysis results the max. bending moment
and max shear force are taken for design purpose.
• The design of the structure elements are done by using
limit state method.
• The detailing of the elements are plotted separately.
• Finally the apartment building plan, analysis and design are
done to satisfy all the requirements of code’s.

10. 1 .Reinforced Concrete Structures Volume 1 & II
H.J.Sha.
2 .Design of Reinforced Concrete Structures
S.Ramamrutham&R.Narayan
3 . Limit State Design Dr.Ramachandra
4 . Indian Standard Code of Practice for Plain and
Reinforced concrete IS 456-2000 Bureau of Indian
Standards
5 .Design Aids for Reinforced Cement Concrete
I S 456-1978 Bureau of Indian Standards