This SlideShow will give you information about Shorting Plugs.

2. • A jumper is a tiny metal connector that is used to close or open part
of an electrical circuit.
• It may be used as an alternative to a dual in-line package (DIP)
switch.
• A jumper has two or more connecting points, which regulate an
electrical circuit board.
• A jumper is made of material that conducts electricity, and is
sheathed in a nonconductive plastic block to prevent accidental
circuit shorts

3. • Jumpers are like on/off switches. They may be removed or
added to enable component performance options.
• A jumper positioned over two or more pins creates a
connection that activates certain setting instructions.

4. • Its one-time configuration, which makes it less vulnerable to
corruption or power failure than firmware.
• They are usually fast and easy to set up.
• It can be adjusted without having physical access to the circuit
board.

5. • Jumpers are used to configure the settings for computer
peripherals such as the motherboard, hard drives, modems,
sound cards, and other components
• It used to close, open or bypass part of an electronic circuit.

6. NOTE:
Our Standard mating pin diameter (D) is 0.56mm
and 1.00mm.
It can be change as per your requirement.

7. • Author Nalin P. Sheth, MBA Harvard, is Managing Director of
Champion Electronics Pvt. Ltd., Pune,411026, India.
• Champion Electronics is serving electronics industry all over the
world from 1975.
• Contact Details :
• Email : sales@champelec.com
• Ph: +91-8928502180.
• Website : www.champelec.com