2. Exchange:
• All T of Reactors •
Feed Composition • No.
of Plates in Distl. Col • T of Heat
Ex • Gas Sep. T •
Compressor P •
Utility Costs
www.ChemicalEngineeringGuy.com
Machine Translated by Google
4. ÿ Multiple and Simultaneous Simulations
ÿ Raw Materials
ÿ Plant Cost
ÿ How it would behave under different conditions ÿ High/Low Pressure ÿ
Humidity Changes ÿ
Temperature change (cool/
warm days/seasons)
ÿ Utilities
www.ChemicalEngineeringGuy.com
ÿ Makes us easier/faster work
ÿ Different Real-Life Scenarios ÿ Change
on raw/feed materials scenario
ÿ Pricing and Costs calculation
Machine Translated by Google
5. ÿ Other commodities such as:
ÿ Fine chemicals
ÿ Sulfuric acids
ÿ Coatings ÿ
Many more…
ÿ Chlorine/Caustic industry ÿ Solvents
ÿ Pharmaceuticals
www.ChemicalEngineeringGuy.com
ÿ Mainly:
ÿ Petrochemical
Machine Translated by Google
6. ÿ Excellent for your curriculum as an engineer
ÿ Perfect for analytical/numerical minds
www.ChemicalEngineeringGuy.com
ÿ Good for debugging and fixing “what if” scenarios
Machine Translated by Google
7. 3. Setting up the Physical Property Environment
1. Introduction
8. Closing
6. Running, Results & Analysis
www.ChemicalEngineeringGuy.com
5. Simulation Environment II – Unit Operations
7. Case Studies (A,B,C,D)
4. Simulation Environment I – The Flowsheet
2. Our Chemical Process!
Machine Translated by Google
8. www.ChemicalEngineeringGuy.com
ÿ Introductory Knowledge of Processes Modeling ÿ
Setting the adequate Physical Properties
ÿ General Flowsheet Concepts
ÿ Basic Flowsheet “manipulation”
ÿ Common Unit Operations
ÿ Minimum Requirements to set up & run a Simulation
ÿ Analyze several changes in process conditions
ÿ Create an interest in Process Modeling
Machine Translated by Google
9. ÿ Please contact me if required (doubts, questions, comments, suggestions)
ÿ Contact@ChemicalEngineeringGuy.com
ÿ More shopping…
www.ChemicalEngineeringGuy.com
Machine Translated by Google
11. ÿ Heat Exchanger
ÿ Reaction Kinetics
ÿ Separation Process
ÿ Flash Drum
ÿ Combustion Chamber / Reactor
ÿ Pump ÿ
Turbine / Expander
ÿ Distillation Columns
ÿ Moments
www.ChemicalEngineeringGuy.com
ÿ Unit Operations
ÿ Heat Exchange
Machine Translated by Google
12. ÿ P/T conditions are adjusted for the Column ÿ
The distillation column operates with a partial condenser and reboiler ÿ The
current operation states that: ÿ N =
20 stages, being fed at 10th stage. Reflux ratio is 2.5 approx., with 2.15 – 21.50 Gas-Distillate
Ratio ÿ Dodecane is required at 150 kPa in the following Plant but Iso-Pentane is ready to ship to client.
ÿ A stream of three hydrocarbons are to be treated as follows: ÿ Methane,
Iso-Pentane and Dodecane must be separated. ÿ Methane is
only useful as a fuel, must be separated in a flash drum and sent to stack ÿ Main separation
is achieved in a Flash Drum ÿ P/T is adjusted to:
15°C, P = 456.6 kPa. Operation is Adiabatic
ÿ Dodecane and isopentane are valuable, so they must be further separated
www.ChemicalEngineeringGuy.com
Machine Translated by Google
13. ÿ The Combustion chamber has the following conditions: ÿ Approx.
100% conversion ÿ Q =
adiabatic operation ÿ Air is
used for oxidant
ÿ T = 350°c, P = 405 kPa inlet conditions
ÿ dP = 125 kPa approx.
www.ChemicalEngineeringGuy.com
ÿ Turbine is used to decrease Pressure of the stack gas.
Machine Translated by Google
14. ÿ Model the plant using Aspen HYSYS in Steady State ÿ
Verify Material/Energy Balances of the unit operations & processes ÿ
Verify purity and composition of streams ÿ
Verify conditions such as T, P and Flow rates. ÿ
For specific unit operations, verify their relevant results
ÿ Heater ÿ Heat duty
ÿ Combustion Chamber ÿ T-max, Heat released by reaction ÿ
Compressor/Pump ÿ Required Work ÿ
For the Columns ÿ Reboiler & Condenser Duties
ÿ Requirements
www.ChemicalEngineeringGuy.com
Machine Translated by Google
16. ÿ Adding Components to the Component List ÿ
Selecting a Physical Property Method (Thermodynamic pack)
ÿ Aspen HYSYS - Petroleum Assays and Oil Characterization ÿ
Different Types of Components
ÿ Methods (EOS, Activity,
Mixed) ÿ Modeling new/inexistent
components ÿ Modeling Crude Oils &
Petroleum Assays ÿ Blending & Installing Oils
ÿ Min. Requirements:
ÿ If you want to further explore this environment ÿ
www.ChemicalEngineeringGuy.com
Machine Translated by Google
17. ÿ Methane, CH4 ÿ
Iso-Pentane, iC5 ÿ
Dodecane, C12
www.ChemicalEngineeringGuy.com
ÿ Add the following to the list:
ÿ Later, we will add: ÿ
CO2, H2O, O2, N2 (air)
Machine Translated by Google
19. ÿ Manipulation of the flowsheet
ÿ Input of data
www.ChemicalEngineeringGuy.com
ÿ Adding Streams (Material / Energy)
ÿ The Simulation Environment Overview
Machine Translated by Google
25. ÿ Setting up Unit Operations
ÿ Running Simulation along…
www.ChemicalEngineeringGuy.com
ÿ Connectivity
ÿ Adding Unit Operations
Machine Translated by Google
26. ÿ T = 15°C
ÿ Material ÿ outlet: Feed
ÿ Tip ÿ Setup up the temperature of the outlet stream
ÿ Energy ÿ outlet: Q-Chiller
ÿ dP = 50.66 kPa
ÿ Conditions:
ÿ Streams: ÿ
Material ÿ inlet: P-Feed
www.ChemicalEngineeringGuy.com
Machine Translated by Google
27. ÿ Material ÿ
ÿ Tip ÿ Setup up the temperature of the outlet stream
ÿ outlet: Gas
ÿ Conditions:
ÿ Streams: ÿ
Material ÿ inlet: Feed
ÿ outlet: Liquid ÿ
Energy ÿ N/A
ÿ T = 15°C
www.ChemicalEngineeringGuy.com
Machine Translated by Google
28. ÿ Material ÿ outlet: Warm-Gas
ÿ T = 350°C
ÿ Energy ÿ inlet: Q-Heater
ÿ dP = 50 kPa
ÿ Tip ÿ Setup up the temperature of the outlet stream
ÿ Conditions:
ÿ Streams: ÿ
Material ÿ inlet: Gas
www.ChemicalEngineeringGuy.com
Machine Translated by Google
29. ÿ Conditions:
ÿ P-final= 1 atm
ÿ Streams:
ÿ Material ÿ inlet: Liquid ÿ
Material ÿ outlet: Col-Inlet
ÿ Tip ÿ Setup up the pressure of the outlet stream
www.ChemicalEngineeringGuy.com
Machine Translated by Google
30. ÿ Use ÿ Equilibrium Reactions (Activity)
ÿ CH4 + 2O2 ÿ CO2 + 2H2O
ÿ C5H12 +8O2 ÿ 5CO2 + 6H2O
ÿ C12H26 + 18.5O2 ÿ 12CO2 + 13H2O
ÿ NOTE ÿ Add to FP
www.ChemicalEngineeringGuy.com
ÿ Add Reactions in the Physical Property Environment
Machine Translated by Google
31. ÿ inlet: Warm-Gas
ÿ Outlet: Reactor-Liq
ÿ inlet: Air
ÿ dP = 125 kPa
ÿ Material ÿ
ÿ outlet: Stack
ÿ Q = 0 (adiabatic)
www.ChemicalEngineeringGuy.com
ÿ Streams: ÿ
Material ÿ
ÿ Conditions:
Machine Translated by Google
32. ÿ Material ÿ outlet: Off-Gas
ÿ Energy ÿ outlet: Mecha-Work
ÿ Streams: ÿ
Material ÿ inlet: Stack
ÿ Conditions: ÿ
Efficiency (adiabatic) = 85.7% ÿ P-final
ÿ 1 atm
www.ChemicalEngineeringGuy.com
Machine Translated by Google
33. ÿ Conditions: ÿ
Stages ÿ
N = 20 stages
ÿ Feed =
10th ÿ Default Reboiler
ÿ Streams:
ÿ Material ÿ inlet: Liquid ÿ
Material ÿ ÿ
outlet: Distillate ÿ
outlet: Bototms
ÿ Energy ÿ Inlet: Q-Reb ÿ
Energy ÿ Outlet: Cond
ÿ dP = 0, Pcond = Pboil = 101 kPa
ÿ No temperature estimates ÿ
Condenser = partial ÿ
Reflux = 2.5, molar
ÿ Gas = 2.15 kmol/h
ÿ Distillate = 21.50 kmol/h
www.ChemicalEngineeringGuy.com
Machine Translated by Google
39. ÿ Material ÿ outlet: Decane
ÿ Energy ÿ Pump workload
ÿ Conditions: ÿ P
discharge = 150 kPa ÿ Tip ÿ
Setup up the pressure of the outlet stream
ÿ Streams: ÿ
Material ÿ inlet: Bottoms
www.ChemicalEngineeringGuy.com
Machine Translated by Google
49. ÿ A) Change Air from 300 kmol/h to 350 kmol/h ÿ
B) Effect of temperature in chiller (15°C ÿ 30°C) ÿ
C) Effect of distillate-gas ratio (1:10 to 1:5) ÿ
D) Effect of number of trays (20 to 30)
www.ChemicalEngineeringGuy.com
ÿ Case Studies
Machine Translated by Google
54. 5. Simulation Environment II – Unit Operations
7. Case Studies
4. Simulation Environment I – The Flowsheet
2. Our Chemical Process!
www.ChemicalEngineeringGuy.com
3.Physical Property Environment
1. Introduction
8. Closing
6.Results & Analysis
Machine Translated by Google
55. ÿ General Flowsheet Concepts ÿ
Setting the adequate Physical Properties ÿ
Basic Flowsheet “manipulation” ÿ
Minimum Requirements to set up simulation ÿ
Common Unit Operations ÿ
Create an interest in Process Modeling
www.ChemicalEngineeringGuy.com
ÿ Introductory Knowledge of Processes Modeling
Machine Translated by Google
56. www.ChemicalEngineeringGuy.com
Exchange:
• All T of Reactors •
Feed Composition • No.
of Plates in Distl. Col • T of Heat
Ex • Gas Sep. T •
Compressor P •
Utility Costs
Machine Translated by Google
57. ÿ Basic Course
ÿ What do you learn there: ÿ More on
Aspen HYSYS ÿ More on Physical
Property Environment ÿ Technical Flowsheet ÿ More Unit
Operations ÿ Analysis Tools ÿ
Plenty Workshops ÿ Process &
Industry Case Studies
www.ChemicalEngineeringGuy.com
ÿ Typically, you will follow your training with
Machine Translated by Google
58. ÿ 1 Month Free Trial then $8.00 USD/month
www.ChemicalEngineeringGuy.com
ÿ Aspen HYSYS – Basic Course!
Machine Translated by Google
59. www.ChemicalEngineeringGuy.com
ÿ Aspen HYSYS – Training Bundle includes: ÿ
Aspen HYSYS –Your First Simulation
ÿ Aspen HYSYS – Basic
Course ÿ Aspen HYSYS - Petroleum Assays and Oil
Characterization ÿ All other new upcoming Aspen Plus courses
Machine Translated by Google