VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
Wind & Solar hybrid power generation
1. B I S H O W J Y O T I S U B E D I 1 4 4 8 0 0 9
J E E W A N D A W A D I 1 4 4 8 0 0 1 6
M I L A N G H I M I R E 1 4 4 8 0 0 2 1
S U B O D H P O K H R E L 1 4 4 8 0 0 3 9
S U J A N D E V K O T A 1 4 4 8 0 0 4 2
A PRESENTATION ON
Wind & Solar Hybrid Power
Generation
2. What We’ll Cover Today
Introduction
Topic Description
Problem Statement
Objectives
Methodology
Possible output
Plan
Advantages
Disadvantage
Application
Conclusion
Questions and answers
3. INTRODUCTION
Hybrid systems, as the name implies, combine
two or more modes of electricity generation .
It is usually done using renewable technologies
such as solar photovoltaic(PV) and wind turbines.
Hybrid systems provide a high level of energy
security through the mix of generation methods.
4. WIND ENERGY
Wind is air blown in nature by different medium.
This wind energy can be utilized to convert it to
electrical energy.
Wind strikes
the blades
Rotating
blades rotate
the generator
Finally
electricity is
generated
5. SOLAR ENERGY
Sun is the main source of renewable energy in earth.
Every types of natural beings or things are directly or
indirectly dependent on solar energy.
Solar
irradiation
Solar
arrays
Electricity
generation
6. PROBLEM STATEMENT
Your logo here
Increasing power cut off due to over load demand.
Due to facing lots of problems during transmission
and distribution in rural areas.
7. OBJECTIVE
To be completely different from traditional electricity labs and
to be fresh and interesting.
To be intimately related to real world industrial power issues
such as power quality.
To show a complex, interrelated system that is closer to the
“real world” than the usual simple systems covered in
educational labs.
To motivate learning by introduction such elements as
environmental and economic concerns of practical interest to
the students.
12. ADVANTAGES
It is standalone renewable electrical energy generation system.
Operation and maintenance cost is low.
Renewable energy sources like, sun, wind,. Are utilized so, no waste
production.
Producing clean, friendly to environment, renewable energy.
Once the system is designed and developed or manufactured, the installation
of system is easy.
No use of Microcontroller or microprocessor , hence, system testing and
understanding is easy.
13. DISADVANTAGES
Initial installation cost is high.
Efficiency of the system is low.
The circuit designing complexity is more as there in no micro-computer for
controlling action.
15. CONCLUSION
The main objective of this project was to give more
stable power from wind–solar hybrid system. The project
will be successfully designed & constructed, which will
be able to collect sun radiation and wind velocity all the
day to operate the system. It can be commercially
applicable in village and remote areas where air velocity
and sun radiation is perfectly available.