Responsibility of a safety officer at a construction site

2.  The main focus of safety engineer at
construction site is to monitor that the
workmen are following safety protocol
or not ,as there are various risky jobs
are involved ,like work at height
,confined space entry, hot work etc.

3.  Construction safety officers work closely with
the Occupational Safety and Health
Administration (OSHA).

4. Safety Trends in
Construction
 In recent years there is a trend for
builders and contractors to pay more
attention to safety-related matters than
ever before.
 It is a fact that companies embracing
safety perform better and have a higher
retention percentage in their workforce.

5. Policy and Regulation
Maintenance
 Safety officers develop, implement and
enforce policies that reduce the risk of
accidents.
 Facts demonstrate that a safety officer
working for your company or on a project
can reduce by 37% the worker's
compensation EMR and bring almost 79%
reduction in employee turnover rate.

6. Site Safety Inspection
 The safety officer is in charge of
inspecting site conditions to determine if
hazards are present and to
establish procedures and policies to
overcome those hazardous situations.

8. Accident Investigation
 The safety officer's main responsibility is
to diminish or eliminate work-related
accidents. However, if an accident
occurs, the safety officer will conduct a
safety investigation to determine root
causes.

9. Construction Safety
Officer Training
 A construction safety officer needs to be
proactive, staying a step ahead of the
group on safety and environmental
hazards. In doing so, the officer trains all
employees and identifies special
requirements for employees.

11. Summary
A construction safety officer can be
responsible for the following duties:
 Inspects the site to ensure it is a hazard-
free environment.
 Conducts toolbox meetings

12.  The safety officer reviews and approves
all subcontractors safety plans
 Verifies that injury logs and reports are
completed and submitted to related
government agencies
 Verifies that all tools and equipment are
adequate and safe for use.

13.  Promotes safe practices at the job site.
 Enforces safety guidelines.
 Conducts investigations of all accidents
and near-misses.
 Reports to concerned authorities as
requested or mandated by regulations.

14.  Conducts job hazard analyses.
 Establishes safety standards and
policies as needed.
 Performs emergency response drills.
 Watches out for the safety of all workers
and works to protect them from entering
hazardous situations.

15.  Responds to employees’ safety concerns.
 Coordinates registration and removal of
hazardous waste.
 Serves as the link between state and local
agencies and contractors.
 Receives reports from and responds to
orders issued by Department of
Labour inspectors.
 Arranges for OSHA mandated testing and/or
evaluations of the workplace by external
agencies/consultants.

16. THANK YOU