DS PLM Composites_Solution

1. Confidential Information
DS PLM Composites Solution
From simple black metal to Optimal use of Composites

2. Confidential Information
DS Integrated Solution for Composites innovation - target
Physical world
•Nesting
•Laser Projection
•Tape laying
•Fiber Placement
•Resin Transfer Molding
CATIA, SIMULIA, DELMIA and DS Partners for an integrated end-to-end
composites process from design & simulation to manufacturing & simulation
Expected gain : ~ 30% overall

3. Confidential Information
DS Integrated Solution for Composites innovation
Ply modification driven by
manufacturing, impacting
assembly context
CPD core product
Assembly context managed
in the analysis
Enhanced ply fiber
direction driven by
analysis
Design in Assembly context
Early simulation of
manuf process.
Dedicated ply
modification features
Design in Manufacturing context
TOO SHORT
FIBERS
Design in Analysis context

4. Confidential Information
Best-In-Class Design / Simulation Loops
Fully integrated Analysis for Designers with CATIA GPS
V5 Integrated Link with FEA
Automated Composite Properties Transfer
Linear Solver CATIA Elfini
Dedicated Post processing
Integrated Analysis for FE Specialists with Abaqus or
Patran/Nastran
CATIA FMS mesh and CPD properties imported
into ABAQUS CAE through one single file
Bi-directional associativity between ABAQUS and CATIA
Ply definition modified inside ABAQUS CAE can be
imported into CATIA CPD
Modification can be accepted or rejected by the
CPD user through an easy-to-use interface
On-going efforts to support other solvers
Link to ANSYS, SYSPLY , SimXpert …

5. Confidential Information
Mature Ecosystem of Manufacturing Solutions
Automated Tape Laying
TORRES LAYUP V5
TAPE GENERATION+TAPE MANUFACTURING
Tape Laying Advanced CPS Interface
ACE V2 Tape Laying and Fiber Placement Composite CAA V5 Interface
Automated Fiber Placement
iCPS for Designer + iCPS for NC Programmer
ACE V2 Tape Laying and Fiber Placement Composite CAA V5 Interface
TORFIBERDES +TORFIBERMAN
CATFiber Export CAA V5 Interface
FP Standard Composites Design + FP Virtual Production
Composites Strategy CAA V5 based + FiberLay + NC Composites Machine Simulation
Hand Lay-Up
TruLASER View Composite + TLV Light View Composite
TruNEST Composite CAA V5 Interface
PANOGEN Nesting Solution for Composites Part Programing
RTM / VARTM, RFI
PAM-RTM for CATIA V5
5
V5 Integrated Solution
V5 Interface
Target date: Q2 2009 TBC
Target date: Q2 2009 TBC
Target date: Q2 2010 TBC

6. Confidential Information