1. ASHISH SOJALIYA
Contact:08347133835
E-Mail:ashish_sojaliya@yahoo.co.in
PROFILE SUMMARY
A dynamic professional with 12 years of experience in, Project Management, operations Management, Maintenance
Management, Erection & Commissioning, Designing & Development, Troubleshooting.
CORE COMPETENCIES
Project Management, Installation & Commissioning, Operations & Maintenance Management (Corrective maintenance,
planned maintenance, Preventive maintenance of HT and LT power substationpanels, switchgears, Transformer, CT, PT,
Relay, APFCR panels, UPS, CNC machine, HT and LT motors, VFFD,VSD,DC drive, Generator panel ,NGR),Details Design
engineering (Autodesk 2015 2D and 3D,Checking of materials as per quality Standard), Estimation and Coasting, Liasoning
Work. Material Management with Centered maintenance management System, Utility Management and Maintenance
(Piston and Screw Compressor, BrineWater Chiller, AHU, Cooling Tower, Oil Chiller, EOT crane, Thermic fluid heater,
Boiler, STP,ETP, RO system, High bay Lighting, Package AC System, Coal Plant, ESP, Pump House Etc.) , Standby Power
Generation (DG sets) Unit, Power System Protection and Study, Harmonics study, Energy AuditConservation
HighlightsAchievements.
Education Career Get Appreciation by faculty for University Highest Score in Power System Protection.
Increasing Taping Plant Speed with Changing in Design of motor pulley and motor 5RPM and Increasing in
Production.
Increasing area of cooling water and increasing efficiency of Oil Chiller.
Replaced Air Condenser with Water Condenser and energy saving up to 83KINRannum.
Implement Temperature Controller in Cooling tower Pump Motor and get benefits up to 45 KINR
Implement Photocell Sensor and made new Control panel for auto manual high bay lighting control and energy
saving up to 125 KINR.
Unwanted KVA demand reducing and get saving 1000KINRAnnum.
Fixing ACB LTPBLEP lookingInterlock system and Enhancing Safety.
For office lighting implement Automanual lighting control system and get payback in 1.4 years.
Canteen lighting Replaced with LED and save Energy and get appreciation and reword by management.
Stop 4200 KAV transformer while not in use and get benefits of unused no load energy up to 108KINR.
Using Dimmer type electronics blast for street lighting and GET energy saving.
Implement AutoManual Lighting Control panel For Substation.
Improving MTBF up to 89 days and cross limits of 30 days of Oxicut machine and get reword by company.
Implement Auto System for water tube 10 Kg steam pressure boiler and increasing efficiency.
Due to Coal dusting and due to heat Fire Occurred So Saving Human life and wipe out fire in a short time save
Boiler Control Room.
For Lamination machine save Heat lose by using glass wool fiber and get improving in heating and saving Energy
due to lose up to 8KUNITannum.
Advice Given to management to improving power factor replaced APFCR and implement Stationary Compensator
for non linear loading.
Placed Chang of Compressor to near production area and improved efficiency by 12% by reducing pressure loss.
Using Induction heating for removing motor bearing improve bearing life from 4 month to 8 month and reducing
downtime due to motor problem.
Implement and design timing circuit for welding machine and get benefit of energy saving.
Replaced Old AC with new EFF2 and 5star rating and saving 12 ton of CO2 and save environment.
Using FRP blade of cooling tower fan motor and set proper angle of blade and improving efficiency of package AC
and reducing motor amps up to 1.86.
Harmonics Study completed in-house.
Substation Project completed in record time.
Transformer Uninstall and reinstallation done in less time.
One panel shifting work is completed in 6 hrs and charge panel.
One underground 185 sq.mm Cable was burnt due to fault so within 16 hrs 218 meters cable laying and
termination done and supply given to office.
200 hrs RCBO box with RCBO in house replaced with SFU in 19 days with termination of cable save company
6000KINR.
LT L&T make ACB servicing start in house and replacing parts also and save 88 KINRannum.
Synchronizing 17 nos. of DG sets and power plant with DG.
Managing Loading of 8.5MW plant.
Designing of SLD of plant PCCMCC in Autodesk.
Converted resistive heating of propane GAS into heat recovery system of furnace get reword.
Deploy heater controlling SCR in place of Contactor so reduce inventory.
Implement same type of materials in all 16 nos of EOT crane and reduce Consumable inventory.
Star delta controlling machine convert with Siemens sinamics Drive.
2. Prepare Energy Consumption, MIS ,Audit related Document, EHS related documentation, Electrical inspection and
factory Inspector related, GPCB related documentation.
CertificateTrainings.
Having Electrical Supervisor Certificate and license of Gujarat Government.
PLC training Course certificate.
Nebosh for safety certificate.
Ethics Certificate.
SESA, WESA, BESA certificate for Electrical Safety.
First Aid training.
Machine Safety Training.
Lock outTag out Training.
EHS Training.
TPM training.
Project Management Training.
Lean Management Training.
ORGANISATIONAL EXPERIENCE.
From April’-12 at Alstom (GE group Company) India Limited, Vadodara, Gujarat as a Lead Maintenance Specialist.
From Mar’10-Apri’12 DISHMAN PHARMA & CHEMICALS CO.LTD Ahmedad Gujarat as a Maintenance Engineer
From Sep-’05- March-10 M/S NOVA PETROCHEMICALS LTD. Ahmedad Gujarat as a GETpower plant Engineer
From June-04-Sep-’05 Shree Jagdamba Polymers and Textile P.Ltd, Dholka, Gujarat as a Trainee Engineer.
Area Of Interest
Covering information about Energy Saving Equipment.
Reading Technical books and get connected with current technology.
Power system Protection (Transformer ,Generator, Bus bar, Distribution system)
Working and keenly interested to working with a new Projects.
Collecting information from difference Technology.
Searching new thing applicable and useful for plant.
Work possible to do in house.
Thinking about Minimize Machine maintenance and Improving Efficiency.
Energy Saving and Protection Scheme is most interesting field.
EDUCATION
2004 B.E. (Electrical Engineering) from SPCE, Visnagar,and Gujarat affiliated to Hemchandrqacharya north Gujrat
University, Patan (Gujarat, India) with 66.68% (Distinction).
PERSONAL DETAILS
Date of Birth: 2nd Aug, 1983
Current Address: House No.-A201, Vrundalay Flats, Laxmipura road,Near Laxmipura Police station. Gorva,
Vadodara-390023
Languages Known: English, Hindi and Gujarati