This document contains a resume and application from Ariel M. Pacis for an Electrical & Instrumentation Engineer position. It details his educational background, including a Bachelor's degree in Electrical Engineering, licenses, and over 12 years of experience in projects for Saudi Aramco and other oil and gas companies. It provides a history of his roles and responsibilities on various projects in Saudi Arabia, the UAE, and the Philippines. Contact information, references, and personal details are also included.
1. Page 1 of 7
Candidate Name :ARIEL M. PACIS
Position Applied :Elect’l & Intrumentation Engineer
Preferred Interview Location : Al Khobar
Passport Number :EB2863841
Contact Details :+966507924522
Current Location : Al Khobar
Engr. ARIEL M. PACIS
Poblacion San Pascual
Batangas Philippines
Mobile No. +966507924522
PHILIPPINES No. +639195485588
email : ampacis@yahoo.com
OBJECTIVE
To give the best quality service and demonstrate the competence that satisfies the
interest of the company.
KEY QUALIFICATION / CAREER HIGHLIGHTS:
Over 12 years of professional experience in the field of Electrical and Instrumentation
works which involves the Design, Supervision, Inspection and Preparation of system and
Sub-System packages. Implements design works in accordance with project specification,
codes and standards. Possessed adequate experiences in implementing and executing
task required in promoting services that will correlate in obtaining common company
objective of providing quality outputs in all aspects of works. Some of SAUDI ARAMCO
projects that I involve was KAUST Utilities and Support, Upgrade Fire Water System at
Abqaiq D&WO Yard, Modify Suction and Discharge MOV @ Ainder GOSP-4, Install
Emergency Isolating Valve on Condensed Line @ AB GOSP-3, Replacement of RTU-
512, RTU-482, RTU-080 for SA Pipeline and etc. Also having Knowledge in using Auto
CAD 2012 and MS Word and Excel Software.
2. Page 2 of 7
EDUCATIONAL HIGHLIGHTS
October 18, 2002 Board Passer
REGISTERED ELECTRICAL ENGINEER
REGISTERED MASTER ELECTRICIAN
EMPLOYMENT HISTORY
November 2010 to present E&I ENGINEER
SAUDI CONSULTING SERVICES
P.O. Box 1293
Dammam 31431
Saudi Arabia
ARAMCO PROJECT : KAUST Utilities and Support, Upgrade Fire Water System at
Abqaiq D&WO Yard, Modify Suction and Discharge MOV @
Ainder GOSP-4, Install Emergency Isolating Valve on
Condensed Line @ AB GOSP-3, Replacement of RTU-512,
RTU-482, RTU-080 for SA Pipeline and etc.
Functions:
▪ Prepares conceptual and Detailed design drawings.
▪ Prepares instrument equipment lay out.
▪ Attends clients project review meeting.
▪ Makes QA/QC checking before submitting the 30%, 60% 90% and 100% submittal of
the drawings and documents.
▪ Preparation of materials and equipment specification and bill of materials (MTO).
Design and engineering of underground duct bank for power and control cables.
Preparation of one line diagram, cable conduit schedule and panel board schedule
drawings.
▪ Supervised loop checking for F&G Instruments and commissioning of F&G
Instruments like smoke, heat detectors, and gas detectors.
▪ Preparation of I/O List
3. Page 3 of 7
▪ Supervised for the commissioning of marshalling and network cabinets.
▪ Supervised for the commissioning of transmitters like temperature, flow, level,
pressure, DP control valves (Pneumatics and process).
▪ Supervised in the installation of all field instruments, junction boxes, ESD field buttons
etc.
▪ Preparation of Instrument Specification sheet, JB terminations, Cable schedule and
Instrument Loop drawings.
▪ Replacement and rerouting of existing homerun cable that are passing through
existing pull boxes to the new junction boxes.
▪ Replacement of existing station control with a new fully integrated control system.
▪ Design preparation for the new ESD System.
▪ Supervised for the cable routing of the power cable and instrument cable.
▪ Supervised for the installation of cable ladder and cable tray.
▪ Prepare all the folder sheet for the power and instrument cable testing (meggering).
▪ Supervised in bus bar testing (Hi pot).
▪ Preparing the new drawings and proposal that will meet the new standards with
regards to the new existing equipments.
▪ Preparing the new ILD layout for the proposed replacement for the pump stations.
▪ Preparing wiring diagrams, ILD and Hook-Ups for the new project.
▪ Witnessing FAT for the MCC panel.
June 2008 to Nov.2009 ELECTRICAL & INSTR. ENGINEER
Gas Services International (GSI)
B#5 Oilfield Supply Center
Jebel Ali Freezone,Dubai, UAE
Functions:
▪ Prepares conceptual and final engineering design.
Checks/reviews design drawings.
4. Page 4 of 7
▪ Preparation of design package for various projects, design and engineering of
aboveground and underground electrical system, 13800V, 4160, 480V, 208V and
120V system. Such works includes modifications of one line diagrams and schematic
diagrams for indoor and outdoor equipments.
▪ Preparation of materials and equipment specification and bill of materials. Design and
engineering of underground duct bank for power and control cables. Preparation of
one line diagram, cable conduit schedule and panel board schedule drawings.
▪ Preparation of calculations for illumination, voltage drop, cable sizing, cable trays,
battery sizing, load calculations and conduit fill. Preparation of calculations for
required transformers, standby generators, UPS, feeder protection (circuit breakers
and fuses), low voltage and medium voltage Switchgears, Motor Control Centers,
Panel boards, Switchboards and Switch racks.
▪ Preparation of I/O List
▪ Preparation of Instrument Specification sheet, JB terminations, Cable schedule and
Instrument Loop drawings.
▪ Replacement and rerouting of existing homerun cable that are passing through
existing pull boxes to the new junction boxes.
▪ Replacement of existing station control with a new fully integrated control system.
▪ Design preparation for the new ESD System.
▪ Preparing the new drawings and proposal that will meet the new standards with
regards to the new existing equipments.
▪ Preparing the new ILD layout for the proposed replacement for the pump stations.
▪ Preparing wiring diagrams, ILD and Hook-Ups for the new project.
September 2006 to June18,2008 ELECTRICAL/INSTRUMENT ENGINEER
Creative Shipyard and Maintenance Engineering
(CSME)
Sharjah, UAE
P.O. Box 65288
Functions:
▪ Preparation of design package for various projects, design and engineering of
aboveground and underground electrical system, 13800V, 4160, 480V, 208V and
5. Page 5 of 7
120V system. Such works includes modifications of one line diagrams and schematic
diagrams for indoor and outdoor equipments. Preparation of materials and equipment
specification and bill of materials.
.▪ Preparation of calculations for illumination, voltage drop, cable sizing, cable trays,
battery sizing, load calculations and conduit fill. Preparation of calculations for
required transformers, standby generators, UPS, feeder protection (circuit breakers
and fuses), low voltage and medium voltage Switchgears, Motor Control Center, Panel
boards, Switchboards and Switch racks.
▪ Preparation of I/O List
▪ Preparing Instrument Index
▪ Floating Enquires for various Instruments.
▪ Preparation of Instrument Datasheets, JB terminations, Cable schedule and
Instrument Loop drawings.
▪ Replacement of existing station control with a new fully integrated control system.
▪ Preparing design for the new cables between ESD and PAS.
▪ Preparing the new drawings and proposal that will meet the new standards with
regards to the new existing equipments.
▪ Preparing the new ILD layout for the proposed replacement for the pump stations.
▪ Preparing wiring diagrams, ILD and Hook-Ups for the new project.
Feb. 16, 2003 – August ’06 PROCESS OPERATOR /ELECT. INSPECTOR
Minola Refining Corporation
CAIP Aplya, Bauan, Batangas
Functions:
Assist in the inspection, maintenance and repair of various miscellaneous electrical
equipment in powerhouse, switch yard and sub-station; may act as an emergency
operator at an unattended powerhouse station.
Performs correction and preventive maintenance, non-routine repair, modification, and
trouble shooting, calibration, removal and installation of electrical systems and
equipment.
▪ Monitor the quality of progress of EPC contractor.
▪ Examines material delivered to production departments to verify conformance to
specifications.
6. Page 6 of 7
▪ Quality Assurance – Responsible for working within the provisions and guidelines of
the Quality Assurance system
▪ Quality Assurance – compliance with the provisions and guidelines of the Quality
Assurance system.
▪ Co-ordinate expediting activities.
▪ Initiate expediting action – either desk or field.
Inspect newly installed equipment including circuits and systems to evaluate
performance under operating conditions; may assist in the design fabrication.
Maintains records of work performed; develops documentation for the maintenance
installation, removal and modification of electrical systems and equipment.
Instructs other personnel in system maintenance procedures and operations may
advise and assist management personnel and others on operating problems involving
electrical equipment.
Actual simulation of Y-∆ start / stop motor control.
Assist in cable pulling from 6.3 KV sub-station to step down Transformer 440 V
Trouble shooting of all Electro Pneumatic Valves.
August 08, 1998 – September 16, 1999 INSTRUMENT TECHNICIAN
CBI Philippines Inc.
P.O. Box 3866 MCPO
Makati City, Philippines
Functions :
Termination of instrumentation cable in instrument equipment, limit switches in
local control panel, main control, pre-commissioned of all instrument work.
Overhauling, assemble and calibration of process instrument such as pressure
safety valve, positioner I/P and P/I transducer.
Loop checking of all types of electrical process and instrument process, pre-
commissioned and commissioned of all instrumentation jobs.
SEMINARS / TRAINING ATTENDED
July 05-07, 2005 FESTO DIDATIC SEMINAR P 121
Pneumatic Maintenance & Trouble Shooting
FESTO Didatic Training Center
Paraňaque City, Metro Manila
7. Page 7 of 7
June 24, 2005 BASIC LIFE SUPPORT
(Adult-CPR Training for Lay Rescuers)
Philippine National Cross
PNRC Batangas Chapter
Capitol Site, Batangas City
June 20-23, 2005 FISRT AID TRAINING
(Standard)
Philippine national Red Cross
PNRC Batangas Chapter
Capitol Site, Batangas City
July 27, 2003 PNEUMATIC CONTROL TECHNOLOGY
FESTO Didatic Training Center
Paraňaque City, Metro Manila
July 21-25, 2003 FESTO DIDATIC SEMINAR IP 212
Industrial Pneumatics
FESTO Didatic Training Center
Paraňaque City, Metro Manila
December 07, 2002 INSTRUMENTATION AND CONTROL
Audio Visual Room
University of Batangas
Hilltop, Batangas City
March 16, 2002 PROGRAMMABLE LOGIC CONTROL (PLC)
Computer Room
University of Batangas
Hilltop, Batangas City
March 08, 2002 STEAMPOWER THERMAL PLANT PROCESS
Coal Fired Power Plant,
Calaca, Batangas
February 06, 2002 ELECTRICAL DESIGN & CONSTRUCTION
University of Batangas
Hilltop, Batangas City
8. Page 8 of 7
EDUCATIONAL BACKGROUND
October 18, 2002 Board Passer
REGISTERED ELECTRICAL ENGINEER
REGISTERED MASTER ELECTRICIAN
March 22, 2002 Bachelor of Science in Electrical Engineering
University of Batangas
Hilltop, Batangas City
April 15, 2002 – June 04, 2002 INSTRUMENTATION (Vocational Course)
National Manpower Youth Council (NMYC)
P. Herrera St., Batangas City
March 1994 Secondary
Western Philippine Colleges
M.H. Del Pilar St., Batangas city
March 1989 Primary
Western Philippine Colleges
M.H. Del Pilar St., Batangas city
Organization University of Batangas – IIEE-SEEDS
2000-2002
Special Skills Auto Cad 2004
Mechanical Works – (maintain different
kinds of pumps and motor)
PERSONAL DATA
Name : ARIEL M. PACIS
Nickname : Ariel
Address : L-191, Mayayay St., Poblacion,
San Pascual, Batangas
Date of Birth : October 25, 1977
Mobile No. : +639081483474
Nationality : Filipino
Religion : Roman Catholic
Mother’s Name : Lolita M. Pacis
Height : 5’8”
Weight : 65 kgs.
Sex : Male
Passport No. : FF - 542921
Driver’s License : 301-96106148
REE License : 30736
RME License : 26934
S.S.S. No. : 04-1319493-0
9. Page 9 of 7
REFERENCES
1] Tarek Fahmy
Department Head
Saudi Consulting Services
31431Dammam P.O. Box 1293
CP. +966507368518
2] ENGR. MICHAEL R. PACATANG
MANAGER
Saudi Consulting Services
31431 Dammam
KSA
3] Bruce Watson
Engineering Manager
Gas Services International
JAFZA Dubai UAE
CP. +971505517414
Engr. ARIEL M. PACIS