This document provides instructions for configuring the IP address of an IAD device. It is a 5-step process: 1) Set the PC address to be on the same network as the IAD; 2) Use telnet to log into the IAD; 3) Assign an IP address to the IAD server; 4) Change the IAD's IP address and save the changes; 5) Verify the new IAD IP address configuration. The full process configures the IAD's IP address, server IP, and gateway to integrate it into the target network.
2. 2
Objects
After this course, you will know how to
configure the IP addresses for IAD
device
3. 3
Set up the PC address
Step 1:
At first we need to change IAD IP address to our network IP using
one PC.
So now connect PC and IAD.
Change PC IP address to IAD’s network IP address .So that we
can put PC and IAD in same network.
Example:
IAD IP address - 168.1.1.2 /30
PC IP address - 168.1.1.1 /30
5. 5
To enter IAD
Step 2:
Ping IAD IP address to check whether connection between PC
and IAD has been established or not.
Then give telnet command to enter IAD IP address.
To enter in to IAD IP address we should give login ID and
password.
6. 6
To enter IAD
Here we are entering into IAD using telnet command.
7. 7
To enter IAD
We should give login and password to enter into IAD.
Login/Password: root/root
8. 8
Assigning server IP
Step 3:
After entering in to IAD IP address …….
Check IAD IP configuration using ifconfig command.
Assign server IP for IAD using server command.
10. 10
Changing IAD’S IP address
Step 4:
After assigning server IP , change IAD’s IP address to Chennai
VSNL’s IP network using ifconfig command .
After this step IAD IP address changes from 168.1.1.2 / 30 to
10.64.2.22 / 30.
Then save our works using save command .
Also give reboot command to save the changes in IAD’s IP
address.
14. 14
Checking IAD ’s new IP
Step 5:
Now we finished IAD IP configuration . We are going to ping
IAD’s gateway from IAD. For that we assigned PC as IAD’s
gateway.
IAD IP address - 10.64.2.22 / 30
IAD gateway ( PC) - 10.64.2.21 / 30
15. 15
Checking IAD ’s new IP
Then enter in to IAD using telnet command then check the IP
address, gateway , server all those things using ifconfig
command.
18. 18
Checking IAD ’s new IP
Now we are going to check our IAD IP address using ifconfig
command.
19. 19
Checking IAD ’s new IP
At last we configured our IAD IP address. So now…………
IAD IP address : 10.64.2.22 /30
Server IP of IAD: 10.64.2.12
Now, we have completed the IP configuration for IAD device.