I am a Diploma in Mechanical Engineer with 25 years of experience in Oil & Gas,Power Plant(Combined cycle & Thermal),Steel,Cement,Material Handling. Returned from Abu-Dhabi(Combined cycle power project) under HYUNDAI Engg & Constrn. I had overseas experience in Saudi Arabia,U.A.E,China. I have 25 years hands – on experience in Construction, Operation, maintenance, commissioning, Overhauling, Fault diagnosis & trouble shooting of large capacity of All Rotating & Static Equipments, Install, align, dismantling, examine and re-assembling, adjust and repair or replace of defective parts of mechanical equipment, such as Boiler,Turbine,Large Gear & centrifugal pumps, Compressors, Turbochargers, Heat exchangers, HFO & lub oil separators, all types of Valves, and other general mechanical maintenance works. I will do independently , as well as team work. I would like to discuss further suitability to my position at an interview stage to work in your esteemed organization.

1. SURAJIT DAS
CONTACT Pratayee apartment-
surajit.das111 @gmail.com Abu dhabi-0971-
505653342
India-0091-8159023350
BLOCK-G,Flat no-13,Bamunara.City-
Durgapur.State-West Bengal.Country- India.Zip-
71 3212
SURAJIT DAS 1

2. QUALIFICATIONS
Diploma: Mechanical Engineering 1990
JOB OBJECTIVE
A proactive, adaptable and conscientious as Mechanical Engineer with 24 years experience in
Project and maintenance of . Seeking a position for a construction engineer to utilize my
engineering experiences in the areas of mechanical Maintenance and construction of Power
Plant/Steel Plant/Oil & Gas/,Material handling/HVAC/,Pipings.
To contribute best of my knowledge ,skill and ability in the growth of the organization, where I will
be working.
SUMMARY
 More than twenty-five years of organizational experience on Maintenance , Erection, Testing
and Commissioning of Thermal and Gas based Power Plant/Oil & Gas/Steel/HVAC/Material
Handling.
 Experience on Overhauling, Fault diagnosis & trouble shooting of all rotating & static
equipments.
 Adjust and repair or replace of defective parts of Boiler, Turbine, All type of pumps,
Compressors,Turbochargers,Heat exchangers,HFO & Lub oil Separators
 Scheduling and planning for preventive Maintenance, Corrective and predictive Maintenance.
 Supervised mechanical design of facility, inspected layout, equipment arrangement and plant
utilities.
 Provided necessary support to manufacturing process, prepared plan to improve efficiency
and reduced cost.
 Performed regular checks and ensured that all safety regulations were followed.
 Planning Co-coordinating of Preventive and breakdown activities for achieving high plant
availability to meet generation target.

3.  Inventory control of maintenance Spares.
 Leading a team of technicians, skilled & unskilled workers for plant maintenance and up
gradation.
 Preparing standard maintenance procedure, Manual, Check-list & Work instructions.
 Fabrication, Erection, Testing, Commissioning of Equipments like Reactors, Pressure Vessels,
C.S & S.S Tanks, Heat Exchanger, Wind mill towers Support Blocks, Conveyors, Columns,
Ducts , Chimneys and Installation of HVAC Ducting, Process and Power Piping, Fire fighting
pipings and Gas pipings.Made out of Exotic Metal like Stainless Steel, Carbon Steel, Cast
Iron, Ductile Iron, G.I & UPVC etc. As per ASME,BS,IS & API Standard. Good Exposure in all
welding Technologies like SMAW, GTAW,MIG & SAW.
ACHIEVEMENT
 Successfully Testing and commissioned Fuel Oil & Fuel Gas System including gas
compressor,PRS System of 1619MW MIRFA IW PP Project(Abu Dhabi) On behalf of Hyundai
Engineering and construction(Korea)
 Erection, successfully commissioned and Maintenance of 25cu-m circular Sinter plant,4.7MW
CPP at KIC Metaliks
 Engineering, installation, commissioning of 1.2mtpa Non-recovery type Coke Oven and RMHS
at BEL.
 . Successfully commissioned 0.4mtpa capacity non-recovery coke oven plant at VISA Steel

4.  Installation and commissioning of 4500TPH CHP including Stacker,Reclaimer and ship loader
at Paradeep pot trust on behalf of BHPE-KINHILL(Australia).
 Successfully Commissioned and Maintenance of CFBC Boiler, Turbine Auxiliaries,CHP & AHP
in 2nd and 3rd unit of 100MW HINDALCO(Hirakud) Thermal power plant
 Successfully commissioned and maintenance of Boiler Auxiliaries, Cooling Tower,Coal and Ash
handling plant of 2x250MW CESC Budge budge Thermal power plant.
 Successfully commissioned NTPC 650MW Combined Cycle Power plant at Bharuch (Gujarat)
on be half of Kawasaki Heavy Industry(Japan).
WORK EXPERIENCE May 2016 — Continue
HYUNDAI ENGINEERING AND CONSTRUCTION LTD
Commissioning Engineer
MIRFA IWPP Combined cycle Power project(Abu Dhabi)
 Fuel Gas System Commissioning , Total Gas Flow rate of 460T/h in FGS(Pigging, Fuel Gas Compressors-of
Samsung Techwin- Lube Oil Flushing, Filter & Separator Skid, Water Bath Heater, Pressure Reducing
Control Station, Fuel Gas Electric Heater, Final Chance Filter)
 CCW Commissioning( Flushing of CCW System of common plant system, OCGT,CCGT)
 DMPF Commissioning (Settlement Test for DMPF tanks of 296m3 capacity , Bubble Test, Leakage test of
Permeate Tank, Backwash Tanks)
 Sea Water Intake( Pre-commissioning of MCW Pumps, RO Pumps, ACW Pumps)
 Fuel Oil System (Air blowing, 29600 m3 Diesel Oil Tank, OIL Flushing, Unloading Pumps, Forwarding Pumps,
and Return Oil Pumps. Pre filters)

5.  Boiler Feed Pumps(Lube Oil Flushing)
KIC METALIKS LTD November 2010 — March2016
Sr Manager
POW ER PLANT
 Working as an Sr Mgr (Power plant) of 4.7MW captive power plant . Responsible for operation
and maintenance of all mechanical equipments like TG and its auxiliaries, Boiler ,I.D/F.D Fan,
D.M Plant etc.
 Led the planning, budgeting and direction of all Maintenance works.
 Coordinated training for the Maintenance teams on site-specific requirements, techniques and
procedures.
 Monitored the safety of all construction activities, making on-site personnel safety the top
priority.
 Implement short term and long term maintenance plan.
 Manage maintenance activities to prevent breakdown of machines.
 Manage Inspection of equipment and machinery.
 Analyze the inspection data.
 Identify potential problems before they become more costly to address and reduce overhead
costs.
 Provide resources to conduct maintenance activities during planned downtime.
BENGAL ENERGY LTD Dec2007 — November 201 0
Sr Manager

6. Look after All mechanical activities including co-ordination with vendors, project Monitoring
and follow-up for timely completion of the 0.6MTPA non recovery type coke oven project. under
consultancy of M/s FLSmidth including commissioning of wagon tripler, stacker and reclaimer
.Additional assignment is as an in charge of maintenance at Raw material handling system
VISA STEEL LTD March 2004 — Nov 2007
Assistant Manager
 Working as a Manager(Mech) in 0.4 MTPA capacity Coke oven project designed by SSIT
China. Mode of Responsibility is project monitoring, follow-up, supervision & coordination with
consultant.
 Inspection & Supervision of Structural fabrication, Erection and Equipment erection &
alignment also is my part of job.
DEVELOPMENT CONSULTANTS LTD
March 1993 — March 2003
Construction Engineer
 Enormous knowledge of the operation and maintenance of high-pressure boilers and related
mechanical equipment.
 Thorough knowledge of the occupational hazards and safety precautions applicable to the
work.
 As an assistant resident engineer (mechanical ) posted at 100MW INDAL HIRAKUD POW ER

7. PROJECT responsibility in this project is monitoring .co-ordination, supervision, quality
surveillance .planning and follow up for timely completion of project. Also day to day
inspection of 6000mt structural fabrication, erection of Boiler and power house , raw water
pipe line, coal handling plant.
 Supervision & inspection of alignment of Turbine & Auxiliaries and related HP & LP
piping erection is my mode of job & responsibility.
 Checking of detailed structural fabrication drawings and project management services of
different project.
 As a mechanical inspector posted at Shoaiba near Jeddah at Desalination plant Client:
SALINE WATER CONVERSION CORPORATION in SAUDI ARABIA on behalf of THE KULJIAN
CORPORATION .for installation of ESP & ASH SILO . Mode of work in this project is
Monitoring, supervision & Inspection, quality control of construction activity. Also look after
erection of equipments including piping .Responsible for erection supervision , inspection of
Fire fighting package , hydrant system, Air Conditioning VENTILATION SYSTEM OF SW ITCH
GEAR room Piping work of fuel oil additive system etc. Constructed by HYUNDAI HEAVY
INDUSTRY.
 As a construction Engineer(mech.) on behalf of Australian Consultant BHPE-KINHILL at (4000
TPH capacity coal handling plant at paradeep orissa) and responsible for supervision,
Inspection, quality assurances of Fabrication & Erection of 3800 MT structure . Also
responsible for supervision and Inspection of assembly & Erection of stacker & reclaimer ,
Magnetic seperator , Ship loader , Rail receival station , coal conveyors of 2400mm to
1800mm width and appx 9km length.
 As construction supervisor (mech) responsible for construction supervision , Inspection ,
Quality assurance, project monitoring & Certification of contractors bill/ measurement sheet of
Fabrication & Erection of Power house , Coal mill, Boiler structures & chimney . My mode
of work also include Supervision & Inspection of mechanical equipment erection in Ash
handling plant and cooling towers, at 2x250MW Budge Budge Power Generation Station CESE
Ltd. near Kolkata.
 As Construction supervisor(Mech) posted at NTPC 650 MW combined cycle power project at
Bharuch (Gujarat) on behalf of KAWASAKI HEAVY INDUSTRY (JAPAN). Here my mode of
work is supervision , Inspection & Quality surveillance of fabrication & Erection of Flue stack ,
pipe supports , pipe bridges. Pipe racks etc Totalling 3000 MT.
Larsen & Toubro March 2003 — March 2004
Assistant Manager
Look after All mechanical activities including co-ordination with vendors, project Monitoring and
follow-up for timely completion of the Lafarge Surma Cement project. Including Drawing review

8. of the above project.
ABROAD EXPERIENCE
China, Kingdom of Saudi Arabia,UAE
ADDITIONAL INFORMATION
 JOINING TIME REQD: Immediate
 PASSPORT NO AND VALIDITY: G6133845 03/02/2018
 SKYPE ID : sdrdtd
REFERENCES
1) Mr A.K Lamba(Executive Director)-Action Ispat-Mobile-9968840148
2) Mr Dilip Banerjee(Executive Director)-Development Consultants Ltd-Mobile-9475326033