A Review on Integrated River Basin Management and Development Master Plan of ...
Titanium anode
1. 一 The types of Titanium Anode
1.Ti-Ru-Ir Plate Anode
1). Material: Gr1 or Gr2 titanium plate coated with ruthenium and iridium oxide
layer
2). Application: Chlor-alkali industry, Sodium hypochlorite production, sewage
water treatment, sea water desalination,etc.
2.Ti-Ru-Ir Bar Anode
1). Material: Gr1 or Gr2 titanium bar coated with ruthenium and iridium oxide
layer.
2). Application: Chlor-alkali industry, Sodium hypochlorite production, water
treatment, etc.
3.Ti-Ru Mesh Anode
1). Material: Gr1 or Gr2 Titanium mesh brush-coated with Ruthenium
2). Application: Electrolysis, Electroplate, Disinfection & Sterilization, Water
treatment, etc.
二.The advantages of titanium anodes
At present, the domestic titanium anode mainly brush to the main. This
electrode has a very wide range of applications, titanium anode with its
lightweight and flexible production process, also known as the DSA anode,
compared to similar anode titanium anode superior performance have the
following points:
1.Anode size is stable, the distance between the electrodes does not change
during the electrolysis process, to ensure that the electrolytic operation in the
case of tank voltage stability.
2.Low operating voltage, low power consumption, DC power consumption can
be reduced by 10-20%.
3. Titanium anode long working life, strong corrosion resistance.
4. Can overcome the graphite anode and lead anode dissolution problems, to
avoid the electrolyte and cathode products pollution, which can improve the
purity of metal products.
5. High current density, over-potential is small, the electrode catalytic activity
is high, can effectively catch high production efficiency.
6. Can avoid lead anode deformation after the short circuit problem, improve
2. current efficiency.
7. Shape making easy, high precision.
8. Titanium matrix can be reused.
9. Low over-potential characteristics, the electrode between the surface and
the electrode bubble is easy to exclude, can effectively reduce the electrolytic
cell voltage.
三.The Difference between MMO Anode and Platinum Titanium Anode.
1. Technical characteristics: excellent antibacterial corrosion resistance;
electrode long life; can be followed by high current density, high current
efficiency. Operating current density: 10000A / M2 belongs to the industrial
pure titanium as the base of the oxygen-type anode.
2. High catalytic activity: Platinum electrode is a high oxygen potential (1.563V
relative to the mercury sulfate) electrode, well known. While the MMO anode is
a low oxygen overcharging 1.385V relative to the mercury sulfide electrode,
the anodic oxygenation zone is easier to oxygen. Therefore, the electrolysis,
the tank voltage is relatively low, more energy savings. This phenomenon in
the copper foil after the alkaline copper wall, has been clearly reflected.
3. No pollution. MMO The oxide is a fairly stable oxide, and the anode coating
is a noble metal iridium ceramic oxide. Almost insoluble in any acid and alkali,
and oxide coating about 20-40μm overall coating oxide be less.
3. If you have any titanium anode and titanium anode basket, Please don’t
hesitate to contact me. Ann@bjmkgs.com