x-rays.ppt
•Download as PPT, PDF•
0 likes•10 views
This document discusses x-rays, including their production via decelerating electrons in an x-ray tube, their wavelength spectrum, and common sources like sealed tubes and synchrotrons. It also covers beam conditioning techniques like collimation, monochromatization using filters or crystal monochromators, and issues affecting resolution and intensity.
Report
Share
Report
Share
Recommended
P9 electromagnetic spectrum
The document discusses the electromagnetic spectrum and the different types of electromagnetic waves. It provides the wavelength ranges for infrared waves, microwaves, radio waves, visible light, ultraviolet waves, X-rays, and gamma rays. It notes that all electromagnetic waves travel at the speed of light in a vacuum and are transverse electromagnetic waves with oscillating electric and magnetic fields perpendicular to the direction of energy transfer. The document instructs the reader to create a mini-book providing details on each type of electromagnetic wave, including its wavelength range, uses, and dangers.
P9 electromagnetic spectrum
The document discusses the electromagnetic spectrum and the different types of electromagnetic waves. It provides the wavelength ranges for infrared waves, microwaves, radio waves, visible light, ultraviolet waves, X-rays, and gamma rays. It notes that all electromagnetic waves travel at the speed of light in a vacuum and are transverse electromagnetic waves with oscillating electric and magnetic fields perpendicular to the direction of energy transfer. It also gives some examples of uses of different types of waves like infrared, microwaves, and X-rays as well as dangers of microwaves and X-rays.
IB Chemistry on Line Emission Spectrum, Bohr Model and Electromagnetic Spectrum
This document provides a tutorial on electromagnetic radiation and the Bohr model of the hydrogen atom. It discusses the electromagnetic spectrum, electromagnetic wave propagation, continuous and line emission spectra, and the Bohr model. Regarding line emission spectra, it specifically examines the visible Balmer series for hydrogen. Calculations are shown for the wavelengths, frequencies, and energies of emission lines. The Bohr model is used to calculate energy levels and ionization energy through the convergence of line spectra. Videos and simulations are referenced to further explain key concepts.
Spectrophotometry methods for molecule analysis
The document discusses instrumental analysis using spectrophotometric techniques. It begins by outlining the main components of a spectrophotometer including light sources, monochromators, and detectors. It then provides background on the properties of light and its interaction with matter including absorption, excitation and emission. The document discusses the principles of different types of optical spectroscopy techniques and the components and design of spectrophotometers including single beam vs double beam instruments and the purpose of monochromators and slits. It also covers luminescence spectroscopy concepts like fluorescence and phosphorescence.
Ir
- Infrared spectroscopy analyzes the absorption of infrared radiation by molecules to determine their structure.
- Infrared radiation is passed through a sample, and the wavelengths absorbed are measured to produce an infrared spectrum.
- The spectrum corresponds to the vibrational and rotational frequencies of functional groups in the molecule, allowing the structure to be deduced.
4_2020_03_20!07_33_21_PM.ppt
Instrumental Analysis: Spectrophotometric techniques can be used to analyze light-matter interactions. Key components of a spectrophotometer include light sources, monochromators to filter wavelengths, and detectors. Monochromators use diffraction gratings or prisms to separate wavelengths. Detectors like photomultipliers and photodiode arrays convert light signals into electrical signals. Spectrophotometers can be single or double beam, with double beam reducing errors. Fluorescence spectroscopy analyzes emission from electronically excited molecule, providing information about electronic structure.
x-rays.pdf
X-ray Lab, Room 117 documents properties of x-rays including their electromagnetic nature, short wavelengths, and ability to be considered as both waves and particles. It describes how x-rays are produced via electron bombardment in an x-ray tube, and the continuous and characteristic spectra that result. Key safety aspects of x-ray sources like filtration, shielding, and interlocks are covered. Radiation safety depends on proper procedures to prevent accidental exposures from improperly configured equipment, equipment manipulation when energized, or failure to follow safety protocols.
ComponentsPrincipleandApplicationsofUVVis-Spectophotometer-DRSJ.ppt
Spectrophotometers use light sources, monochromators, and detectors to measure the absorption of specific wavelengths of light by a sample. They have applications in photometry, colorimetry, and spectrophotometry to quantitatively analyze compounds. A spectrophotometer passes light through a sample and measures the intensity of transmitted light, allowing concentration measurements using the Beer-Lambert law. Common components include sources like deuterium lamps, monochromators to select wavelengths, and detectors to convert light to electrical signals.
Recommended
P9 electromagnetic spectrum
The document discusses the electromagnetic spectrum and the different types of electromagnetic waves. It provides the wavelength ranges for infrared waves, microwaves, radio waves, visible light, ultraviolet waves, X-rays, and gamma rays. It notes that all electromagnetic waves travel at the speed of light in a vacuum and are transverse electromagnetic waves with oscillating electric and magnetic fields perpendicular to the direction of energy transfer. The document instructs the reader to create a mini-book providing details on each type of electromagnetic wave, including its wavelength range, uses, and dangers.
P9 electromagnetic spectrum
The document discusses the electromagnetic spectrum and the different types of electromagnetic waves. It provides the wavelength ranges for infrared waves, microwaves, radio waves, visible light, ultraviolet waves, X-rays, and gamma rays. It notes that all electromagnetic waves travel at the speed of light in a vacuum and are transverse electromagnetic waves with oscillating electric and magnetic fields perpendicular to the direction of energy transfer. It also gives some examples of uses of different types of waves like infrared, microwaves, and X-rays as well as dangers of microwaves and X-rays.
IB Chemistry on Line Emission Spectrum, Bohr Model and Electromagnetic Spectrum
This document provides a tutorial on electromagnetic radiation and the Bohr model of the hydrogen atom. It discusses the electromagnetic spectrum, electromagnetic wave propagation, continuous and line emission spectra, and the Bohr model. Regarding line emission spectra, it specifically examines the visible Balmer series for hydrogen. Calculations are shown for the wavelengths, frequencies, and energies of emission lines. The Bohr model is used to calculate energy levels and ionization energy through the convergence of line spectra. Videos and simulations are referenced to further explain key concepts.
Spectrophotometry methods for molecule analysis
The document discusses instrumental analysis using spectrophotometric techniques. It begins by outlining the main components of a spectrophotometer including light sources, monochromators, and detectors. It then provides background on the properties of light and its interaction with matter including absorption, excitation and emission. The document discusses the principles of different types of optical spectroscopy techniques and the components and design of spectrophotometers including single beam vs double beam instruments and the purpose of monochromators and slits. It also covers luminescence spectroscopy concepts like fluorescence and phosphorescence.
Ir
- Infrared spectroscopy analyzes the absorption of infrared radiation by molecules to determine their structure.
- Infrared radiation is passed through a sample, and the wavelengths absorbed are measured to produce an infrared spectrum.
- The spectrum corresponds to the vibrational and rotational frequencies of functional groups in the molecule, allowing the structure to be deduced.
4_2020_03_20!07_33_21_PM.ppt
Instrumental Analysis: Spectrophotometric techniques can be used to analyze light-matter interactions. Key components of a spectrophotometer include light sources, monochromators to filter wavelengths, and detectors. Monochromators use diffraction gratings or prisms to separate wavelengths. Detectors like photomultipliers and photodiode arrays convert light signals into electrical signals. Spectrophotometers can be single or double beam, with double beam reducing errors. Fluorescence spectroscopy analyzes emission from electronically excited molecule, providing information about electronic structure.
x-rays.pdf
X-ray Lab, Room 117 documents properties of x-rays including their electromagnetic nature, short wavelengths, and ability to be considered as both waves and particles. It describes how x-rays are produced via electron bombardment in an x-ray tube, and the continuous and characteristic spectra that result. Key safety aspects of x-ray sources like filtration, shielding, and interlocks are covered. Radiation safety depends on proper procedures to prevent accidental exposures from improperly configured equipment, equipment manipulation when energized, or failure to follow safety protocols.
ComponentsPrincipleandApplicationsofUVVis-Spectophotometer-DRSJ.ppt
Spectrophotometers use light sources, monochromators, and detectors to measure the absorption of specific wavelengths of light by a sample. They have applications in photometry, colorimetry, and spectrophotometry to quantitatively analyze compounds. A spectrophotometer passes light through a sample and measures the intensity of transmitted light, allowing concentration measurements using the Beer-Lambert law. Common components include sources like deuterium lamps, monochromators to select wavelengths, and detectors to convert light to electrical signals.
06. UV Spectroscopy of Organic Compounds.pdf
Ultraviolet spectroscopy is used to study electronic transitions in molecules caused by ultraviolet light. The document discusses key concepts in UV spectroscopy including electromagnetic radiation, the electromagnetic spectrum, and how molecular orbitals and conjugation affect electronic transitions and absorption spectra. Specifically, it describes how increasing conjugation causes a bathochromic or red shift in absorption maxima due to decreased energy differences between molecular orbitals. The document also discusses applications of UV spectroscopy such as determining molecular structure and stereochemistry.
UV SPECTROSCOPY ppt.pptx
This document provides an overview of UV-Visible spectroscopy. It discusses the basic principles including electromagnetic radiation, spectroscopy, absorption of UV-Visible light, and Beer-Lambert's law. It describes the instrumentation of UV-Visible spectroscopy including light sources, wavelength selectors, sample compartments, detectors and basic components. It also discusses electronic transitions, shifts in absorption, and applications of UV-Visible spectroscopy in qualitative and quantitative analysis.
UV SPECTROSCOPY ppt.pptx
UV - Visible Spectroscopy detailed information is included .The Spectroscopy study provide the information and the absorbance as well the concentration of the drugs is studied.
Elecromagnetic Radiations.pdf
The document discusses electromagnetic radiation and its spectrum. It defines electromagnetic radiation as a form of energy produced by moving charged particles or oscillating electric and magnetic fields. It states electromagnetic radiation includes microwaves, radio waves, gamma rays, X-rays, and more. The document also discusses properties of electromagnetic radiation like wavelength, frequency, amplitude, velocity, and energy. It describes how electromagnetic radiation is grouped into categories in the electromagnetic spectrum based on wavelength or frequency.
Name of region
The document describes the different regions of the electromagnetic spectrum, from gamma rays to radio waves. It provides the wavelength ranges and frequency ranges for each region, as well as some of their technological and natural applications. The regions are ordered from highest to lowest frequency and shortest to longest wavelength. Visible light, which the human eye can see, makes up only a small portion of the overall electromagnetic spectrum. The micron is used as the basic unit to measure wavelengths across the spectrum.
INFRARED SPECTROSCOPY(IR)
It is an analytical technique uselful for detection of functional groups present in particular molecules and compounds.
It is highly applicable in pharmaceutical and chemical engineering.
X ray generation Radiology information by rahul ppt 2
X-rays are generated when high-energy electrons collide with a metal target in an X-ray tube. This produces both a continuous spectrum and characteristic peaks corresponding to the target material. Various techniques can be used to produce nearly monochromatic X-rays for diffraction experiments, including β filters to remove unwanted wavelengths, pulse-height discrimination with detectors, and diffraction from monochromator crystals which selectively pass the desired wavelength.
Instrumentation of uv spectrophotometer pranav kumar singh
This document discusses the components and operation of a UV spectrophotometer. It describes the main components as the source, wavelength selector, sample container, detector, and readout. It provides details on common sources like deuterium arc lamps, tungsten lamps, and xenon arc lamps. It also discusses wavelength selector devices like monochromators and filters. The document outlines the applications of UV spectrophotometry in areas like detection of impurities, structure elucidation, and quantitative analysis. In under 3 sentences.
Ultra violet spectroscopy
Ultraviolet (UV) spectroscopy uses absorption of UV light by molecules to determine their structure. It is based on electronic transitions in molecules that are excited by UV light. The document discusses UV spectroscopy terminology including wavelength, frequency, and energy. It describes different types of electronic transitions that can occur like σ-σ*, n-π*, and π-π* and how conjugation affects transitions. Instrumentation for UV spectroscopy is also covered including light sources, filters, gratings, sample holders, detectors, and applications in qualitative and quantitative analysis.
for LIVE Teaching- EM Wave.pptx
This document discusses the electromagnetic spectrum. It defines electromagnetic waves as a combination of electric and magnetic fields that oscillate perpendicular to each other and the direction of wave travel. Electromagnetic waves can travel through a medium or empty space at the speed of light. The document then presents the different regions of the electromagnetic spectrum - radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays - and compares their relative wavelengths, frequencies, and energies. Wavelength decreases and frequency and energy increase as one moves from radio waves to gamma rays across the electromagnetic spectrum.
for LIVE Teaching- EM Wave.pptx
This document discusses the electromagnetic spectrum. It defines electromagnetic waves as a combination of electric and magnetic fields that oscillate perpendicular to each other and the direction of wave travel. Electromagnetic waves can travel through a medium or empty space at the speed of light. The document then details the different regions of the electromagnetic spectrum from radio waves to gamma rays, listing their typical wavelength ranges in meters and frequency ranges in Hertz. It notes that wavelength decreases while frequency and energy increase as one moves from radio waves to gamma rays across the spectrum. The document provides examples to compare how these properties change across the regions.
Spectroscopy module 6
Module 6 provides an overview of several spectroscopic, diffraction, and microscopic techniques. It discusses the fundamentals of spectroscopy and electromagnetic radiation. Specific techniques covered include UV-visible spectroscopy, X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The principles and applications of UV-visible spectroscopy and XRD are explained in more detail. UV-visible spectroscopy involves electronic transitions that cause absorption of radiation. XRD works by measuring diffraction of X-rays by crystalline materials to determine their atomic structure.
Introduction to Fourier Transfer Infrared Spectroscopy
The preferred method of infrared spectroscopy is known as Fourier Transform InfraRed (FT-IR). Infrared spectroscopy involves passing IR photons through a sample. The sample absorbs some of the infrared light and passes some of it through (transmitted). The resulting spectrum depicts the sample's molecule absorption and transmission, resulting in a molecular fingerprint.
Analytical instrumentation
The document discusses various analytical techniques and instrumentation used in chemistry. It describes spectroscopic techniques like UV-VIS and IR spectroscopy. It also discusses chromatographic techniques like gas chromatography and HPLC. Finally, it provides an overview of different types of detectors used in analytical instrumentation like photomultiplier tubes, photodiodes, and describes their basic working principles.
Radar 2009 a 17 transmitters and receivers
This document provides an overview of radar transmitter and receiver systems. It begins with an introduction and block diagram of radar transmitters and receivers. The bulk of the document then focuses on different types of high power tube amplifiers used in radar transmitters, including klystrons, traveling wave tubes, crossed field amplifiers, and magnetrons. It also briefly discusses solid state RF power amplifiers. The document concludes with an outline of topics to be covered, including receivers and waveform generators, other transmitter and receiver subsystems, and radar receiver-transmitter architectures.
Ftir theory and applications
This document provides an overview of Fourier transform infrared spectroscopy (FTIR) theory and instrumentation. It discusses the electromagnetic spectrum and discovery of infrared radiation. It describes the principles of infrared absorption including electronic, vibrational and rotational transitions. The key components of an FTIR instrument are described including the infrared light source, Michelson interferometer, sample compartment, detectors and processing unit. Common infrared window materials and their properties are also summarized.
Linear accelerator.pptx
This document discusses different types of radiation used in radiation oncology. It describes the evolution from kilovoltage x-ray units to modern megavoltage linear accelerators. Key developments include the use of higher voltage x-rays called supervoltage therapy, and later the advent of megavoltage x-rays and electrons generated by linear accelerators. The document outlines the main components of linear accelerators including the electron gun, RF power source like klystrons or magnetrons, accelerating structure, and treatment head for beam shaping and monitoring.
X ray production (Emission and Filtration)
X-rays are produced when high-energy electrons interact with and decelerate in the anode target. This produces both characteristic x-rays from electron shell interactions and bremsstrahlung x-rays from electron deflection by atomic nuclei. The x-ray emission spectrum consists of discrete characteristic lines and a continuous bremsstrahlung spectrum ranging from zero to the peak tube voltage. Added and inherent filtration are used to filter out lower energy x-rays, hardening the beam for better tissue penetration and reducing patient dose from less penetrating x-rays. The quality and quantity of the x-ray beam are controlled respectively by adjusting the tube voltage and milliamperes.
UT 3.ppt
The document discusses the basic principles of ultrasonic testing. It covers topics such as oscillation, frequency, wave propagation, reflection, transmission, piezoelectric effect, ultrasonic probes, ultrasonic instruments, and inspection techniques. The key aspects are that ultrasonic testing uses piezoelectric crystals to generate and receive high frequency sound waves, which are used to detect flaws by analyzing reflections and transmissions through materials.
Electromagnetic radiation
This document discusses electromagnetic radiation and its properties. It defines electromagnetic radiation as a form of energy that exhibits both wave and particle properties. As a wave, electromagnetic radiation is characterized by its frequency, wavelength, and amplitude. Higher frequency radiation like gamma rays and X-rays have shorter wavelengths and higher energies, allowing them to penetrate deeper into materials. Exposure to high energy radiation can be dangerous by breaking molecular bonds through ionization. Electromagnetic radiation can also be described by photon particles, where the energy of each photon is determined by Planck's constant and the radiation's frequency or wavelength.
Aqsa Ilyas (plastic eating bacteria in a chemical perspective).pptx
This document discusses plastic-eating bacteria Ideonella sakaiensis. It was discovered in 2016 in Japan and secretes two enzymes, PETase and MHETase, that allow it to break down polyethylene terephthalate (PET) plastic. PETase attacks PET plastic to form an intermediate complex, then water breaks this down into mono(2-hydroxyethyl) terephthalic acid (MHET) and terephthalic acid (TPA). Subsequently, MHETase acts on MHET to produce ethylene glycol and TPA. While I. sakaiensis shows promise in plastic biodegradation, it requires genetic engineering to optimize its potential as it currently only degrades plastic
(Seminar )Metabolic pathway of Desulphurization of Dibenzothiophenne ppt.pptx
This document discusses desulphurization and the use of Raman spectroscopy to analyze samples. It introduces hydrodesulphurization and biodesulphurization as two types of desulphurization processes. Biodesulphurization uses aerobic bacteria like Rhodococcus erythropolis to selectively remove sulfur from compounds like dibenzothiophene through enzymatic pathways without degrading hydrocarbons. Raman spectroscopy is presented as a rapid, non-invasive technique to analyze bacterial culture samples and metabolites without expensive preparation methods. It can identify compounds by their unique spectral fingerprints.
More Related Content
Similar to x-rays.ppt
06. UV Spectroscopy of Organic Compounds.pdf
Ultraviolet spectroscopy is used to study electronic transitions in molecules caused by ultraviolet light. The document discusses key concepts in UV spectroscopy including electromagnetic radiation, the electromagnetic spectrum, and how molecular orbitals and conjugation affect electronic transitions and absorption spectra. Specifically, it describes how increasing conjugation causes a bathochromic or red shift in absorption maxima due to decreased energy differences between molecular orbitals. The document also discusses applications of UV spectroscopy such as determining molecular structure and stereochemistry.
UV SPECTROSCOPY ppt.pptx
This document provides an overview of UV-Visible spectroscopy. It discusses the basic principles including electromagnetic radiation, spectroscopy, absorption of UV-Visible light, and Beer-Lambert's law. It describes the instrumentation of UV-Visible spectroscopy including light sources, wavelength selectors, sample compartments, detectors and basic components. It also discusses electronic transitions, shifts in absorption, and applications of UV-Visible spectroscopy in qualitative and quantitative analysis.
UV SPECTROSCOPY ppt.pptx
UV - Visible Spectroscopy detailed information is included .The Spectroscopy study provide the information and the absorbance as well the concentration of the drugs is studied.
Elecromagnetic Radiations.pdf
The document discusses electromagnetic radiation and its spectrum. It defines electromagnetic radiation as a form of energy produced by moving charged particles or oscillating electric and magnetic fields. It states electromagnetic radiation includes microwaves, radio waves, gamma rays, X-rays, and more. The document also discusses properties of electromagnetic radiation like wavelength, frequency, amplitude, velocity, and energy. It describes how electromagnetic radiation is grouped into categories in the electromagnetic spectrum based on wavelength or frequency.
Name of region
The document describes the different regions of the electromagnetic spectrum, from gamma rays to radio waves. It provides the wavelength ranges and frequency ranges for each region, as well as some of their technological and natural applications. The regions are ordered from highest to lowest frequency and shortest to longest wavelength. Visible light, which the human eye can see, makes up only a small portion of the overall electromagnetic spectrum. The micron is used as the basic unit to measure wavelengths across the spectrum.
INFRARED SPECTROSCOPY(IR)
It is an analytical technique uselful for detection of functional groups present in particular molecules and compounds.
It is highly applicable in pharmaceutical and chemical engineering.
X ray generation Radiology information by rahul ppt 2
X-rays are generated when high-energy electrons collide with a metal target in an X-ray tube. This produces both a continuous spectrum and characteristic peaks corresponding to the target material. Various techniques can be used to produce nearly monochromatic X-rays for diffraction experiments, including β filters to remove unwanted wavelengths, pulse-height discrimination with detectors, and diffraction from monochromator crystals which selectively pass the desired wavelength.
Instrumentation of uv spectrophotometer pranav kumar singh
This document discusses the components and operation of a UV spectrophotometer. It describes the main components as the source, wavelength selector, sample container, detector, and readout. It provides details on common sources like deuterium arc lamps, tungsten lamps, and xenon arc lamps. It also discusses wavelength selector devices like monochromators and filters. The document outlines the applications of UV spectrophotometry in areas like detection of impurities, structure elucidation, and quantitative analysis. In under 3 sentences.
Ultra violet spectroscopy
Ultraviolet (UV) spectroscopy uses absorption of UV light by molecules to determine their structure. It is based on electronic transitions in molecules that are excited by UV light. The document discusses UV spectroscopy terminology including wavelength, frequency, and energy. It describes different types of electronic transitions that can occur like σ-σ*, n-π*, and π-π* and how conjugation affects transitions. Instrumentation for UV spectroscopy is also covered including light sources, filters, gratings, sample holders, detectors, and applications in qualitative and quantitative analysis.
for LIVE Teaching- EM Wave.pptx
This document discusses the electromagnetic spectrum. It defines electromagnetic waves as a combination of electric and magnetic fields that oscillate perpendicular to each other and the direction of wave travel. Electromagnetic waves can travel through a medium or empty space at the speed of light. The document then presents the different regions of the electromagnetic spectrum - radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays - and compares their relative wavelengths, frequencies, and energies. Wavelength decreases and frequency and energy increase as one moves from radio waves to gamma rays across the electromagnetic spectrum.
for LIVE Teaching- EM Wave.pptx
This document discusses the electromagnetic spectrum. It defines electromagnetic waves as a combination of electric and magnetic fields that oscillate perpendicular to each other and the direction of wave travel. Electromagnetic waves can travel through a medium or empty space at the speed of light. The document then details the different regions of the electromagnetic spectrum from radio waves to gamma rays, listing their typical wavelength ranges in meters and frequency ranges in Hertz. It notes that wavelength decreases while frequency and energy increase as one moves from radio waves to gamma rays across the spectrum. The document provides examples to compare how these properties change across the regions.
Spectroscopy module 6
Module 6 provides an overview of several spectroscopic, diffraction, and microscopic techniques. It discusses the fundamentals of spectroscopy and electromagnetic radiation. Specific techniques covered include UV-visible spectroscopy, X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The principles and applications of UV-visible spectroscopy and XRD are explained in more detail. UV-visible spectroscopy involves electronic transitions that cause absorption of radiation. XRD works by measuring diffraction of X-rays by crystalline materials to determine their atomic structure.
Introduction to Fourier Transfer Infrared Spectroscopy
The preferred method of infrared spectroscopy is known as Fourier Transform InfraRed (FT-IR). Infrared spectroscopy involves passing IR photons through a sample. The sample absorbs some of the infrared light and passes some of it through (transmitted). The resulting spectrum depicts the sample's molecule absorption and transmission, resulting in a molecular fingerprint.
Analytical instrumentation
The document discusses various analytical techniques and instrumentation used in chemistry. It describes spectroscopic techniques like UV-VIS and IR spectroscopy. It also discusses chromatographic techniques like gas chromatography and HPLC. Finally, it provides an overview of different types of detectors used in analytical instrumentation like photomultiplier tubes, photodiodes, and describes their basic working principles.
Radar 2009 a 17 transmitters and receivers
This document provides an overview of radar transmitter and receiver systems. It begins with an introduction and block diagram of radar transmitters and receivers. The bulk of the document then focuses on different types of high power tube amplifiers used in radar transmitters, including klystrons, traveling wave tubes, crossed field amplifiers, and magnetrons. It also briefly discusses solid state RF power amplifiers. The document concludes with an outline of topics to be covered, including receivers and waveform generators, other transmitter and receiver subsystems, and radar receiver-transmitter architectures.
Ftir theory and applications
This document provides an overview of Fourier transform infrared spectroscopy (FTIR) theory and instrumentation. It discusses the electromagnetic spectrum and discovery of infrared radiation. It describes the principles of infrared absorption including electronic, vibrational and rotational transitions. The key components of an FTIR instrument are described including the infrared light source, Michelson interferometer, sample compartment, detectors and processing unit. Common infrared window materials and their properties are also summarized.
Linear accelerator.pptx
This document discusses different types of radiation used in radiation oncology. It describes the evolution from kilovoltage x-ray units to modern megavoltage linear accelerators. Key developments include the use of higher voltage x-rays called supervoltage therapy, and later the advent of megavoltage x-rays and electrons generated by linear accelerators. The document outlines the main components of linear accelerators including the electron gun, RF power source like klystrons or magnetrons, accelerating structure, and treatment head for beam shaping and monitoring.
X ray production (Emission and Filtration)
X-rays are produced when high-energy electrons interact with and decelerate in the anode target. This produces both characteristic x-rays from electron shell interactions and bremsstrahlung x-rays from electron deflection by atomic nuclei. The x-ray emission spectrum consists of discrete characteristic lines and a continuous bremsstrahlung spectrum ranging from zero to the peak tube voltage. Added and inherent filtration are used to filter out lower energy x-rays, hardening the beam for better tissue penetration and reducing patient dose from less penetrating x-rays. The quality and quantity of the x-ray beam are controlled respectively by adjusting the tube voltage and milliamperes.
UT 3.ppt
The document discusses the basic principles of ultrasonic testing. It covers topics such as oscillation, frequency, wave propagation, reflection, transmission, piezoelectric effect, ultrasonic probes, ultrasonic instruments, and inspection techniques. The key aspects are that ultrasonic testing uses piezoelectric crystals to generate and receive high frequency sound waves, which are used to detect flaws by analyzing reflections and transmissions through materials.
Electromagnetic radiation
This document discusses electromagnetic radiation and its properties. It defines electromagnetic radiation as a form of energy that exhibits both wave and particle properties. As a wave, electromagnetic radiation is characterized by its frequency, wavelength, and amplitude. Higher frequency radiation like gamma rays and X-rays have shorter wavelengths and higher energies, allowing them to penetrate deeper into materials. Exposure to high energy radiation can be dangerous by breaking molecular bonds through ionization. Electromagnetic radiation can also be described by photon particles, where the energy of each photon is determined by Planck's constant and the radiation's frequency or wavelength.
Similar to x-rays.ppt (20)
X ray generation Radiology information by rahul ppt 2
X ray generation Radiology information by rahul ppt 2
Instrumentation of uv spectrophotometer pranav kumar singh
Instrumentation of uv spectrophotometer pranav kumar singh
Introduction to Fourier Transfer Infrared Spectroscopy
Introduction to Fourier Transfer Infrared Spectroscopy
More from ZainSial4
Aqsa Ilyas (plastic eating bacteria in a chemical perspective).pptx
This document discusses plastic-eating bacteria Ideonella sakaiensis. It was discovered in 2016 in Japan and secretes two enzymes, PETase and MHETase, that allow it to break down polyethylene terephthalate (PET) plastic. PETase attacks PET plastic to form an intermediate complex, then water breaks this down into mono(2-hydroxyethyl) terephthalic acid (MHET) and terephthalic acid (TPA). Subsequently, MHETase acts on MHET to produce ethylene glycol and TPA. While I. sakaiensis shows promise in plastic biodegradation, it requires genetic engineering to optimize its potential as it currently only degrades plastic
(Seminar )Metabolic pathway of Desulphurization of Dibenzothiophenne ppt.pptx
This document discusses desulphurization and the use of Raman spectroscopy to analyze samples. It introduces hydrodesulphurization and biodesulphurization as two types of desulphurization processes. Biodesulphurization uses aerobic bacteria like Rhodococcus erythropolis to selectively remove sulfur from compounds like dibenzothiophene through enzymatic pathways without degrading hydrocarbons. Raman spectroscopy is presented as a rapid, non-invasive technique to analyze bacterial culture samples and metabolites without expensive preparation methods. It can identify compounds by their unique spectral fingerprints.
UAF_PPTX_Landscape (1).potx
The document repeatedly mentions the University of Agriculture Faisalabad (UAF) nine times without providing any other details. It appears to be about the University of Agriculture Faisalabad but does not give any information about the university besides listing its name.
Hiba's seminar.pptx
This document discusses using surface-enhanced Raman spectroscopy (SERS) to analyze the action of antibiotics and essential oils against bacteria. It tests several antibiotics and essential oils against three bacterial strains - Enterococcus durans and two Aeromonas species - using disk diffusion and SERS. The SERS analysis finds that the antibiotics target and alter the bacterial cell wall structure. It collects the SERS signature of the bacterial cell wall and finds the effect of the drugs is reflected by changes in peak intensities, indicating disruption to the cell wall and ability of bacteria to replicate.
sulfur conatinig agrochemicals.pptx
This document discusses sulfur-containing agrochemicals. It begins by defining agrochemicals and their purpose of protecting crops and enhancing yields. It then focuses on sulfur-containing agrochemicals, explaining that they contain sulfur as a main ingredient. The document discusses the effects of these chemicals on soybean growth, yield and protein content. It also covers the classification, synthesis and applications of various sulfur-containing compounds used as pesticides, herbicides and fungicides. In conclusion, it emphasizes the role of sulfur-containing agrochemicals in modern sustainable agriculture.
Tania Tabassum.pptx
This document discusses the stages of formation, composition, and structure of microbial biofilms. It defines a biofilm as a group of microorganisms like bacteria that stick to surfaces and each other, embedded in an extracellular polymeric substance. The stages of biofilm formation include initial attachment, irreversible attachment, development, and maturation. The structure of a biofilm includes bacteria, polysaccharides, proteins, extracellular DNA, and water. The composition includes microbial cells, polysaccharides, proteins, DNA, RNA, and ions. Bacteria form biofilms to protect themselves from environmental stresses and antimicrobial agents.
Presentation1.pptx
This document discusses applications of radiation chemistry. It begins with an introduction to radiation chemistry and its principles and working. Some key applications discussed include medicine like radiation therapy and diagnostic radiology, industry like textile treatment, agriculture like mutation breeding, food irradiation, sterilization, and environmental applications like water treatment and flue gas treatment. The document provides examples and details for several of these applications. It concludes with references for further information.
32531-32541.ppt
Radiation can be ionizing or non-ionizing. Ionizing radiation has enough energy to remove electrons from atoms and molecules and includes alpha particles, beta particles, gamma rays, x-rays, and neutrons. Non-ionizing radiation does not have enough energy to ionize but can excite electrons. Exposure to ionizing radiation can lead to cellular DNA damage and increased cancer risk over time depending on dose. Acute radiation sickness occurs above 100 rads while long term effects like cancer have no threshold. Occupational exposure limits aim to keep annual whole body dose below 5 rem (50 mSv) per year. Common sources of natural background radiation include radon gas and cosmic rays.
applicationofradioisotopes-161127171310 (1).pptx
This document discusses applications of radioisotopes and radiation technology in various fields. It describes how radioisotopes are produced in reactors and accelerators and through chemical separation. It also discusses the properties and types of radiation. Applications discussed include using isotopes to determine the age of water sources, measure thickness in industry, and diagnose medical conditions. Radioisotopes are used as tracers in agriculture to study fertilizer uptake and in medicine for imaging brain tumors. The document also covers radiation sterilization, chemical synthesis using radiation, and genetic engineering applications. Radiation therapy for cancer treatment is also summarized. Associated radiological safety aspects are discussed.
Physics ppt.pptx
The document discusses Pakistan's ongoing energy crisis. It began in 2007 due to a shortage of electricity and natural resources like oil. This huge gap between energy demand and supply has led to economic and political instability, industry closures, unemployment, and social issues. To overcome the crisis, Pakistan needs short-term solutions like increasing private power producers and importing electricity, as well as long-term measures such as building dams, developing coal power plants, and exploring more oil, gas, and coal reserves.
Affinty chromatography.ppt
Affinity chromatography is a technique used to separate biochemical compounds based on a reversible interaction between a compound and a ligand coupled to a chromatography matrix. It offers selectivity and can purify compounds that may be difficult to separate by other techniques. Key aspects of affinity chromatography include the matrix, ligand, ligand immobilization through various coupling methods, and elution techniques to reverse binding. Biomimetic dyes designed to mimic natural ligands can function as ligands in affinity chromatography.
UAF_PPTX_Square.potx
The document repeatedly mentions the University of Agriculture Faisalabad (UAF) in Pakistan. In a concise manner, the document focuses solely on identifying the institution as the University of Agriculture Faisalabad.
Nuclear Chemistry ppt.pptx
The document discusses radioactivity and nuclear chemistry concepts. It defines radioactivity as the spontaneous decay of unstable atomic nuclei. There are three main types of decay: alpha particles which are helium nuclei, beta particles which are electrons, and gamma rays which are electromagnetic waves. Alpha particles have a low penetrating power but strongly ionize atoms, while gamma rays have a high penetrating power but do not directly ionize atoms. Isotope notation includes extra information about an isotope's nucleus. Unstable atoms undergo alpha or beta decay to become more stable elements in decay chains. Nuclear fission and fusion are also discussed, as well as the concept of half-life which determines the rate of radioactive decay.
Physics ppt.pptx
The document discusses Pakistan's ongoing energy crisis. It began in 2007 due to a shortage of electricity and natural resources like oil. This large gap between supply and demand has led to economic and political instability, industry closures, unemployment, and social issues for Pakistan over the past 15 years. The document recommends short-term solutions like increasing private power producers and importing electricity, as well as long-term plans such as building more dams, developing coal power plants, and exploring more oil, gas, and coal reserves.
More from ZainSial4 (14)
Aqsa Ilyas (plastic eating bacteria in a chemical perspective).pptx
Aqsa Ilyas (plastic eating bacteria in a chemical perspective).pptx
(Seminar )Metabolic pathway of Desulphurization of Dibenzothiophenne ppt.pptx
(Seminar )Metabolic pathway of Desulphurization of Dibenzothiophenne ppt.pptx
Recently uploaded
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Promoting Multilateral Cooperation for Sustainable Peatland management
Presented by Agus Julianto on GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland managementGlobal Landscapes Forum (GLF)
Presented by Jan Peters at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and ActionPeatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge EducationGlobal Landscapes Forum (GLF)
Presented by Feri Johana at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably一比一原版(UMTC毕业证书)明尼苏达大学双城分校毕业证如何办理
原件一模一样【微信：6496090】【(UMTC毕业证书)明尼苏达大学双城分校毕业证成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：6496090
Climate Change All over the World .pptx
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
How about Huawei mobile phone-www.cfye-commerce.shop
How about Huawei mobile phone-www.cfye-commerce.shop
Overview of the Global Peatlands Assessment
Presented by Patrick Scheel at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...Global Landscapes Forum (GLF)
Presented by Sonya Dewi at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyWildlife-AnIntroduction.pdf so that you know more about our environment
All about wildlife, if you are fond of animals and wildlife then do follow us for more content like this
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
在线办理(lboro毕业证书)拉夫堡大学毕业证学历证书一模一样
学校原件一模一样【微信：741003700 】《(lboro毕业证书)拉夫堡大学毕业证学历证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Peatlands of Latin America and the Caribbean
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
原版制作(Newcastle毕业证书)纽卡斯尔大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(Newcastle毕业证书)纽卡斯尔大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Recently uploaded (20)
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies.
Promoting Multilateral Cooperation for Sustainable Peatland management
Promoting Multilateral Cooperation for Sustainable Peatland management
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
world-environment-day-2024-240601103559-14f4c0b4.pptx
world-environment-day-2024-240601103559-14f4c0b4.pptx
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland management
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge Education
How about Huawei mobile phone-www.cfye-commerce.shop
How about Huawei mobile phone-www.cfye-commerce.shop
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Wildlife-AnIntroduction.pdf so that you know more about our environment
Wildlife-AnIntroduction.pdf so that you know more about our environment
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...
x-rays.ppt
- 1. X-rays 1012 106 103 10 1 10-1 10-3 Long Wave IR Visible UV X-rays Gamma rays wavelength (nm) Frau Röntgen's hand
- 2. 1012 106 103 10 1 10-1 10-3 Long Wave IR Visible UV X-rays Gamma rays wavelength (nm) X-rays
- 3. X-ray tube
- 4. X-ray tube
- 5. X-rays
- 6. X-rays White radiation Produced upon "collisions" with electrons in target Any amount of energy can be lost up to a max. amount Continuous variation of wavelength Characteristic radiation Specific energies absorbed Specific x-ray wavelengths emitted Wavelengths characteristic of target atom type
- 7. X-rays Mechanism Decelerating charges give off radiation
- 8. X-rays Mechanism Decelerating charges give off radiation
- 9. X-rays Mechanism Decelerating charges give off radiation
- 10. X-rays Mechanism Decelerating charges give off radiation
- 11. X-rays Mechanism Decelerating charges give off radiation
- 13. X-rays - vary tube voltage Intensity Wavelength E ≈ hc/Kedge E >> hc/Kedge E > hc/Kedge Iconts = AiZV~2 Ichar = Ai(V-Vcrit)~1.5
- 18. X-rays Moseley's law - energy vs. atomic number
- 19. X-ray sources Sealed tubes - Coolidge type common - Cu, Mo, Fe, Cr, W, Ag Ka = (2 Ka1 + Ka2)/3
- 20. X-ray sources Sealed tubes - Coolidge type common - Cu, Mo, Fe, Cr, W, Ag intensity limited by cooling requirements (2-2.5kW) (~99% of energy input converted to heat)
- 21. X-ray sources Intensity changes with take-off angle But resolution decreases with take-off angle
- 22. X-ray sources
- 23. Other X-ray sources Rotating anode high power - 40 kW demountable various anode types
- 24. Other X-ray sources Synchrotron need electron or positron beam orbiting in a ring beam is bent by magnetic field x-ray emission at bend Advantages 10-4 - 10-5 radians divergence (3-5 mm @ 4 m) high brilliance wavelength tunable
- 25. Other X-ray sources Synchrotron Advantages 10-4 - 10-5 rad divergence (3-5 mm @ 4 m) high brilliance wavelength tunable
- 26. Other X-ray sources Synchrotron need electron or positron beam orbiting in a ring beam is bent by magnetic field x-ray emission at bend Advantages 10-4 - 10-5 rad divergence (3-5 mm @ 4 m) high brilliance wavelength tunable high signal/noise ratio
- 27. X-ray sources Synchrotron Advantages 10-4 - 10-5 rad divergence (3-5 mm @ 4 m) high brilliance wavelength tunable
- 28. X-ray sources Synchrotron Advantages 10-4 - 10-5 rad divergence (3-5 mm @ 4 m) high brilliance wavelength tunable
- 30. Beam conditioning Monochromatization -filters – materials have atomic nos. 1 or 2 less than anode 50-60% beam attenuation placing after specimen/before detector filters most of specimen fluorescence allows passage of high intensity & long wavelength white radiation X-rays detector filter specimen
- 31. Beam conditioning Monochromatization -filters – materials have atomic nos. 1 or 2 less than anode 50-60% beam attenuation placing after specimen/before detector filters most of specimen fluorescence allows passage of high intensity & long wavelength white radiation
- 32. Beam conditioning Monochromatization Crystal monochromators – LiF, SiO2, pyrolytic graphite critical – reflectivity ex: for MoK, LiF 9.4% graphite 54 %
- 33. Beam conditioning Monochromatization Crystal monochromators – LiF, SiO2, pyrolytic graphite critical – reflectivity ex: for MoK, LiF 9.4% graphite 54 % resolution – determines peak/bkgrd ratio & spectral purity best - Si – 10" graphite – 0.52°
- 34. Beam conditioning Monochromatization Monochromator shape usually flat – problems with divergent beams concentrating type – increases I by factor of 1.5-2