What is my IP address by Truly Explorer
•Download as PPTX, PDF•
0 likes•28 views
Do you know? what is my IP ? is one of the most searched questions on google. If you want to know about your IP address it means you know it’s virtually attached to your system. But an IP address is more than that. In this post, I will tell you some basic information about IP addresses.
Report
Share
Report
Share
Recommended
Types of ip address classes
The document discusses the different classes of IP addresses: Class A uses the first octet and is for large networks; Class B uses the first two octets and is for medium networks; Class C uses the first three octets and is for small networks. It also mentions Class D is for multicast addresses and Class E is reserved for future use. The document explains that IP addresses help identify networks and devices, and knowing an IP address can help locate where a visitor or email came from.
IP address and Domain name
IP and Domain Checker, How to Find IP Address Server, How to Trace Someone IP Address:
This pptx shows the IP address, attacks on IP address (i.e. IP Spoofing), Domain name, the difference between domain name and IP address, how to find IP address of the host, and how to convert domain name to IP address
lecture 6.pptx
This document provides an introduction to IP addressing and subnetting. It discusses key topics including IP addresses and versions IPv4 and IPv6, network classes in IPv4, subnet masks, private addresses, Classless Inter-Domain Routing (CIDR), gateway addresses, and subnetting including variable length subnet masks. Examples are provided to illustrate subnetting networks and determining valid subnets, broadcast addresses, and host ranges.
Week10 lec1
The document discusses classful IP addressing and subnetting. It begins by explaining classful IP addressing and its issues with flexibility, efficiency, and router table entries. It then introduces subnetting as a way to create a hierarchical network structure and better allocate addresses. The key points are that subnetting splits the host ID portion of an IP address into subnet ID and host ID bits, and that a subnet mask specifies this split and is used by routers to determine the network and subnet portions of an IP address. Examples are provided to illustrate how subnet masks are determined and how subnets, subnet addresses, and host addresses are designated for a given network address range.
Ip address
An IP address is a unique number assigned to devices connected to a computer network using the Internet Protocol. It has two main functions: to identify hosts or network interfaces and to provide location addressing. There are different versions of IP addresses, with IPv6 using a 128-bit address to allow for a vastly greater number of devices. IP addresses also have classes that categorize their ranges and intended uses, such as private networks or multicast addressing. An IP address is always used together with a subnet mask to further define the network portion of the address.
CCNA IP Address,Subnet mask (part 2)
This document provides an overview of IPV4 addressing concepts including:
- IPV4 classes and their ranges (Class A: 0-127, Class B: 128-191, etc.)
- How the number of network and host bits determines the size of networks
- What network and broadcast addresses are and how they are identified
- How subnet masks differentiate the network and host portions of an IP address
- What loopback addresses are and why the 127.0.0.0/8 network is reserved for them
Ip and mac address
1. The document discusses IP and MAC addressing, including the classes and ranges of IPv4 addresses and the breakdown of an example IPv4 address.
2. It explains that an IP address is assigned by an Internet Service Provider to uniquely identify a device on a network, and can change depending on the network, while a MAC address uniquely identifies a device's physical hardware.
3. The key differences between IP and MAC addresses are that MAC addresses ensure physical uniqueness and are retrieved via ARP, while IP addresses provide logical network location and are assigned by ISPs to be retrieved via RARP.
Ipaddressing spk1
The document discusses Internet Protocol (IP) which is a connectionless, unreliable protocol that forwards data packets from a source to a destination identified by IP addresses. IP addresses are 32-bit numbers divided into network and host portions. There are different classes of IP addresses - Class A has 8-bit network portions, Class B has 16-bit, and Class C has 24-bit. Subnet masks define subnets within network portions. ARP resolves IP addresses to MAC addresses on local networks. IPv6 was developed as IPv4 was running out of 32-bit addresses and IPv6 uses 128-bit addresses.
Recommended
Types of ip address classes
The document discusses the different classes of IP addresses: Class A uses the first octet and is for large networks; Class B uses the first two octets and is for medium networks; Class C uses the first three octets and is for small networks. It also mentions Class D is for multicast addresses and Class E is reserved for future use. The document explains that IP addresses help identify networks and devices, and knowing an IP address can help locate where a visitor or email came from.
IP address and Domain name
IP and Domain Checker, How to Find IP Address Server, How to Trace Someone IP Address:
This pptx shows the IP address, attacks on IP address (i.e. IP Spoofing), Domain name, the difference between domain name and IP address, how to find IP address of the host, and how to convert domain name to IP address
lecture 6.pptx
This document provides an introduction to IP addressing and subnetting. It discusses key topics including IP addresses and versions IPv4 and IPv6, network classes in IPv4, subnet masks, private addresses, Classless Inter-Domain Routing (CIDR), gateway addresses, and subnetting including variable length subnet masks. Examples are provided to illustrate subnetting networks and determining valid subnets, broadcast addresses, and host ranges.
Week10 lec1
The document discusses classful IP addressing and subnetting. It begins by explaining classful IP addressing and its issues with flexibility, efficiency, and router table entries. It then introduces subnetting as a way to create a hierarchical network structure and better allocate addresses. The key points are that subnetting splits the host ID portion of an IP address into subnet ID and host ID bits, and that a subnet mask specifies this split and is used by routers to determine the network and subnet portions of an IP address. Examples are provided to illustrate how subnet masks are determined and how subnets, subnet addresses, and host addresses are designated for a given network address range.
Ip address
An IP address is a unique number assigned to devices connected to a computer network using the Internet Protocol. It has two main functions: to identify hosts or network interfaces and to provide location addressing. There are different versions of IP addresses, with IPv6 using a 128-bit address to allow for a vastly greater number of devices. IP addresses also have classes that categorize their ranges and intended uses, such as private networks or multicast addressing. An IP address is always used together with a subnet mask to further define the network portion of the address.
CCNA IP Address,Subnet mask (part 2)
This document provides an overview of IPV4 addressing concepts including:
- IPV4 classes and their ranges (Class A: 0-127, Class B: 128-191, etc.)
- How the number of network and host bits determines the size of networks
- What network and broadcast addresses are and how they are identified
- How subnet masks differentiate the network and host portions of an IP address
- What loopback addresses are and why the 127.0.0.0/8 network is reserved for them
Ip and mac address
1. The document discusses IP and MAC addressing, including the classes and ranges of IPv4 addresses and the breakdown of an example IPv4 address.
2. It explains that an IP address is assigned by an Internet Service Provider to uniquely identify a device on a network, and can change depending on the network, while a MAC address uniquely identifies a device's physical hardware.
3. The key differences between IP and MAC addresses are that MAC addresses ensure physical uniqueness and are retrieved via ARP, while IP addresses provide logical network location and are assigned by ISPs to be retrieved via RARP.
Ipaddressing spk1
The document discusses Internet Protocol (IP) which is a connectionless, unreliable protocol that forwards data packets from a source to a destination identified by IP addresses. IP addresses are 32-bit numbers divided into network and host portions. There are different classes of IP addresses - Class A has 8-bit network portions, Class B has 16-bit, and Class C has 24-bit. Subnet masks define subnets within network portions. ARP resolves IP addresses to MAC addresses on local networks. IPv6 was developed as IPv4 was running out of 32-bit addresses and IPv6 uses 128-bit addresses.
Ip addressing comp
The document discusses public and private IP addresses. It explains that IP is the communication protocol that defines the rules for computers to communicate over the internet using IP addresses. Each computer and packet of data must have a unique IP address. Private IP addresses are used for internal networks and cannot access the public internet directly, requiring a router. Static IP addresses assign computers a fixed IP address that never changes each time they connect.
Lecture9
The document discusses Internet Protocol (IP) and IP addressing. It explains that IP is a connectionless, unreliable protocol that uses IP addresses to route packets from source to destination. It also describes the different classes of IP addresses, including Class A, B, C, and D addresses, and how the IP address is divided into a network number and host number. Finally, it introduces IPv6 which uses 128-bit addresses instead of 32-bit addresses to address scalability issues with the growing internet.
What is an ip address
An IP address is a unique identifier for devices connected to a network. It consists of four sections of 8 bits each, written as numerals separated by periods. IP addresses allow devices to connect and transfer files and emails. There are different classes of IP addresses assigned based on network size and purpose. Subnetting divides local networks for greater routing efficiency. The growing number of internet-connected devices is driving the transition from the current IPv4 standard to the newer IPv6 protocol.
Ip address.
IPV4 and IPV6 are internet protocol versions that assign unique addresses to devices to allow them to communicate over the internet. IPV4, introduced in 1981, uses 32-bit addresses and still routes most internet traffic. IPV6, introduced in 1995 to address limitations of IPV4, uses 128-bit addresses and supports artificial intelligence. While both are core internet protocols, IPV4 and IPV6 cannot directly communicate with each other.
How IP address works
The details of TCP/IP, how its working under the hood with minimal presentation. It was contributed by Souvik (One of my net friend). Thanks Souvik
Chapter04 ip addressing networking
IP addresses are used to identify devices on the internet or on a network. There are two main versions of IP addresses: IPv4 uses 32-bit addresses, while IPv6 uses 128-bit addresses due to the limited number of IPv4 addresses. An IPv4 address is made up of four octets separated by periods and each octet ranges from 0-255. IPv4 addresses are divided into five classes - A, B, C, D, and E - based on the number of bits used for the network ID and host ID portions of the address.
Ipv4
This document discusses IPv4 addressing and the key components of an IPv4 address. It explains that an IPv4 address is a 32-bit address that uniquely identifies a device connected to the internet. It also describes how an IPv4 address is comprised of four octets separated by periods, with each octet representing an 8-bit number between 0-255. The document further discusses binary and decimal conversion of IP addresses and how subnet masks are used to identify networks and allow communication between hosts on the same network. It concludes by summarizing the different addressing modes of unicast, broadcast and multicast.
Ip addressing...
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
Basic networking concept1
IP addresses are unique numbers that identify devices on a network. Public IP addresses are used for internet access while private IP addresses are used within local networks. A broadband router shares a public IP connection by assigning private IP addresses to connected devices and providing firewall protection. IP addresses allow communication within the same local network but devices must have the correct IP address range to connect. Network troubleshooting tools like ping help verify connectivity issues.
Assigning A Static IP Address
This document discusses assigning static IP addresses in a home network. It explains that assigning each device a specific IP address avoids problems when troubleshooting and prevents address conflicts. The steps to assign a static IP address on a Windows computer are provided, which include opening network connections, selecting TCP/IP properties, and entering the IP address, subnet mask, default gateway, and DNS server addresses. Properly assigning static IP addresses allows easy management and identification of devices on the home network.
IP-Subnetworking
This document provides an introduction to IP subnetting. It begins by explaining the anatomy of IP numbers, noting that they are assigned to network interfaces rather than individual hosts. It then defines IP network classes and how they divide the 32-bit IP number between the network and host portions. The document goes on to define what subnets are, reasons for subnetting a network, and how to calculate the subnet mask and network numbers when subnetting a Class C IP network number. It concludes by briefly mentioning routing and routing tables.
Hacking
- The document discusses various techniques used by hackers during different stages of hacking, including gathering information about a target system, performing reconnaissance to identify open ports and services, and ways to hide one's online identity and location.
- It provides details on how to find a target's IP address, trace an IP to determine location, use tools like ping sweeps and traceroute to gather network information, and use proxy servers, VPNs or HTTP tunneling to circumvent restrictions.
- The techniques discussed aim to educate on hacking methodology while distinguishing "hackers" who test limits from actual "crackers" who intend harm. It cautions that directly hacking systems without permission would be illegal.
Ip address classes
This document discusses IP address classes and their characteristics. There are 5 classes - A, B, C, D, and E. Class A addresses range from 1-126 and support up to 16 million hosts per network. Class B addresses range from 128-191 and support up to 65 thousand hosts. Class C addresses range from 192-223 and support up to 254 hosts. Classes D and E are reserved for multicasting and experimental use, respectively. The document also lists private IP address ranges for classes A, B, and C.
Easy IP Addressing and Subnetting Manual for Starters
This document provides an introduction to IP addressing concepts such as binary to decimal conversion, public and private IP addresses, and classes of IP addresses. It explains that an IP address identifies a node on a network and allows communication between nodes. It also describes the classes of IP addresses (A, B, C, D, E), noting that classes A, B, and C are most commonly used and define ranges for the number of allowed hosts and networks. The document then provides details on class A, B, and C IP addresses and how they divide the available addresses.
Chapter 2 : Inet Address & Data Stream
This document discusses internet addressing and data streams. It begins by explaining that sockets need a unique address in the form of an IP address and port number to communicate with other sockets. It then defines IP as the Internet Protocol and explains that IP addresses are unique identifiers used for communication between two points on a network. IPv4 addresses have 32 bits but IPv4 addressing is running out, and IPv6 was created as a solution. The document also discusses how internet addressing is handled in Java using the InetAddress class and provides examples of methods like getHostName(), getHostAddress(), getLocalHost(), and getByName().
Ip base
IP addresses are 32-bit numbers that uniquely identify devices on a network. They allow for data transmission between computers and consist of four sections ranging from 0-255. There are five classes of IP addresses - A, B, C, D, and E - that are used to define network sizes. While IPv4 addresses are common, IPv6 addresses with more capacity are also in use. IP addresses can be static, assigned manually, or dynamic through protocols like DHCP.
Basics of IP Address
Know the basics of IP Address and how it is structured. How IP address is read by a computer in binary format.
Ip address
This document provides information about IP addresses and network addressing. It discusses what an IP address is and how it is used to identify devices on a network. It also describes the different classes of IP addresses (A, B, C, D, E) and how they divide the 32-bit address into a network ID and host ID portion. The classes determine the number of networks and maximum number of hosts for each network.
Lecture 10 i pv4 & ipv6
The document discusses Internet Protocol (IP) addresses, including IPv4 and IPv6. It states that IP addresses are assigned to devices connected to a TCP/IP network and are used to locate and identify nodes. It provides examples of IP addresses in both IPv4 and IPv6 format. It describes that IPv4 and IPv6 are the two main Internet Protocol types, and that IPv6 was developed to replace IPv4 due to the impending exhaustion of IPv4 addresses.
Ip4vsip6
- IPv4 uses 32-bit addresses that are divided into network and host portions, while IPv6 uses 128-bit addresses. Various techniques were used to extend IPv4's address space, including subnetting, CIDR, and NAT.
- Subnetting divides networks into subnets and hosts using part of the host address bits. CIDR allows routing with variable length network prefixes. NAT allows multiple private IP addresses to share a single public IP address.
- IPv6 was developed to replace IPv4 and features a vastly larger address space, more efficient routing headers, built-in security, and autoconfiguration of addresses. The transition from IPv4 to IPv6 involves dual stack, tunneling, and translation methods.
Understanding IP Addresses.pptx
An IP address is a unique string of numbers assigned to every internet-connected device to identify its location and allow communication between devices on the internet. There are two main types: IPv4 addresses consisting of four numbers separated by dots, and IPv6 addresses which are longer strings of numbers and letters. IP addresses allow users to access websites and share information online by identifying their devices.
What is IPv6?
What is IPv6? IPv6 is the successor to IPv4, the Internet addressing protocol which has been used for many years since the early days of the Internet.
More Related Content
What's hot
Ip addressing comp
The document discusses public and private IP addresses. It explains that IP is the communication protocol that defines the rules for computers to communicate over the internet using IP addresses. Each computer and packet of data must have a unique IP address. Private IP addresses are used for internal networks and cannot access the public internet directly, requiring a router. Static IP addresses assign computers a fixed IP address that never changes each time they connect.
Lecture9
The document discusses Internet Protocol (IP) and IP addressing. It explains that IP is a connectionless, unreliable protocol that uses IP addresses to route packets from source to destination. It also describes the different classes of IP addresses, including Class A, B, C, and D addresses, and how the IP address is divided into a network number and host number. Finally, it introduces IPv6 which uses 128-bit addresses instead of 32-bit addresses to address scalability issues with the growing internet.
What is an ip address
An IP address is a unique identifier for devices connected to a network. It consists of four sections of 8 bits each, written as numerals separated by periods. IP addresses allow devices to connect and transfer files and emails. There are different classes of IP addresses assigned based on network size and purpose. Subnetting divides local networks for greater routing efficiency. The growing number of internet-connected devices is driving the transition from the current IPv4 standard to the newer IPv6 protocol.
Ip address.
IPV4 and IPV6 are internet protocol versions that assign unique addresses to devices to allow them to communicate over the internet. IPV4, introduced in 1981, uses 32-bit addresses and still routes most internet traffic. IPV6, introduced in 1995 to address limitations of IPV4, uses 128-bit addresses and supports artificial intelligence. While both are core internet protocols, IPV4 and IPV6 cannot directly communicate with each other.
How IP address works
The details of TCP/IP, how its working under the hood with minimal presentation. It was contributed by Souvik (One of my net friend). Thanks Souvik
Chapter04 ip addressing networking
IP addresses are used to identify devices on the internet or on a network. There are two main versions of IP addresses: IPv4 uses 32-bit addresses, while IPv6 uses 128-bit addresses due to the limited number of IPv4 addresses. An IPv4 address is made up of four octets separated by periods and each octet ranges from 0-255. IPv4 addresses are divided into five classes - A, B, C, D, and E - based on the number of bits used for the network ID and host ID portions of the address.
Ipv4
This document discusses IPv4 addressing and the key components of an IPv4 address. It explains that an IPv4 address is a 32-bit address that uniquely identifies a device connected to the internet. It also describes how an IPv4 address is comprised of four octets separated by periods, with each octet representing an 8-bit number between 0-255. The document further discusses binary and decimal conversion of IP addresses and how subnet masks are used to identify networks and allow communication between hosts on the same network. It concludes by summarizing the different addressing modes of unicast, broadcast and multicast.
Ip addressing...
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
Basic networking concept1
IP addresses are unique numbers that identify devices on a network. Public IP addresses are used for internet access while private IP addresses are used within local networks. A broadband router shares a public IP connection by assigning private IP addresses to connected devices and providing firewall protection. IP addresses allow communication within the same local network but devices must have the correct IP address range to connect. Network troubleshooting tools like ping help verify connectivity issues.
Assigning A Static IP Address
This document discusses assigning static IP addresses in a home network. It explains that assigning each device a specific IP address avoids problems when troubleshooting and prevents address conflicts. The steps to assign a static IP address on a Windows computer are provided, which include opening network connections, selecting TCP/IP properties, and entering the IP address, subnet mask, default gateway, and DNS server addresses. Properly assigning static IP addresses allows easy management and identification of devices on the home network.
IP-Subnetworking
This document provides an introduction to IP subnetting. It begins by explaining the anatomy of IP numbers, noting that they are assigned to network interfaces rather than individual hosts. It then defines IP network classes and how they divide the 32-bit IP number between the network and host portions. The document goes on to define what subnets are, reasons for subnetting a network, and how to calculate the subnet mask and network numbers when subnetting a Class C IP network number. It concludes by briefly mentioning routing and routing tables.
Hacking
- The document discusses various techniques used by hackers during different stages of hacking, including gathering information about a target system, performing reconnaissance to identify open ports and services, and ways to hide one's online identity and location.
- It provides details on how to find a target's IP address, trace an IP to determine location, use tools like ping sweeps and traceroute to gather network information, and use proxy servers, VPNs or HTTP tunneling to circumvent restrictions.
- The techniques discussed aim to educate on hacking methodology while distinguishing "hackers" who test limits from actual "crackers" who intend harm. It cautions that directly hacking systems without permission would be illegal.
Ip address classes
This document discusses IP address classes and their characteristics. There are 5 classes - A, B, C, D, and E. Class A addresses range from 1-126 and support up to 16 million hosts per network. Class B addresses range from 128-191 and support up to 65 thousand hosts. Class C addresses range from 192-223 and support up to 254 hosts. Classes D and E are reserved for multicasting and experimental use, respectively. The document also lists private IP address ranges for classes A, B, and C.
Easy IP Addressing and Subnetting Manual for Starters
This document provides an introduction to IP addressing concepts such as binary to decimal conversion, public and private IP addresses, and classes of IP addresses. It explains that an IP address identifies a node on a network and allows communication between nodes. It also describes the classes of IP addresses (A, B, C, D, E), noting that classes A, B, and C are most commonly used and define ranges for the number of allowed hosts and networks. The document then provides details on class A, B, and C IP addresses and how they divide the available addresses.
Chapter 2 : Inet Address & Data Stream
This document discusses internet addressing and data streams. It begins by explaining that sockets need a unique address in the form of an IP address and port number to communicate with other sockets. It then defines IP as the Internet Protocol and explains that IP addresses are unique identifiers used for communication between two points on a network. IPv4 addresses have 32 bits but IPv4 addressing is running out, and IPv6 was created as a solution. The document also discusses how internet addressing is handled in Java using the InetAddress class and provides examples of methods like getHostName(), getHostAddress(), getLocalHost(), and getByName().
Ip base
IP addresses are 32-bit numbers that uniquely identify devices on a network. They allow for data transmission between computers and consist of four sections ranging from 0-255. There are five classes of IP addresses - A, B, C, D, and E - that are used to define network sizes. While IPv4 addresses are common, IPv6 addresses with more capacity are also in use. IP addresses can be static, assigned manually, or dynamic through protocols like DHCP.
Basics of IP Address
Know the basics of IP Address and how it is structured. How IP address is read by a computer in binary format.
Ip address
This document provides information about IP addresses and network addressing. It discusses what an IP address is and how it is used to identify devices on a network. It also describes the different classes of IP addresses (A, B, C, D, E) and how they divide the 32-bit address into a network ID and host ID portion. The classes determine the number of networks and maximum number of hosts for each network.
Lecture 10 i pv4 & ipv6
The document discusses Internet Protocol (IP) addresses, including IPv4 and IPv6. It states that IP addresses are assigned to devices connected to a TCP/IP network and are used to locate and identify nodes. It provides examples of IP addresses in both IPv4 and IPv6 format. It describes that IPv4 and IPv6 are the two main Internet Protocol types, and that IPv6 was developed to replace IPv4 due to the impending exhaustion of IPv4 addresses.
Ip4vsip6
- IPv4 uses 32-bit addresses that are divided into network and host portions, while IPv6 uses 128-bit addresses. Various techniques were used to extend IPv4's address space, including subnetting, CIDR, and NAT.
- Subnetting divides networks into subnets and hosts using part of the host address bits. CIDR allows routing with variable length network prefixes. NAT allows multiple private IP addresses to share a single public IP address.
- IPv6 was developed to replace IPv4 and features a vastly larger address space, more efficient routing headers, built-in security, and autoconfiguration of addresses. The transition from IPv4 to IPv6 involves dual stack, tunneling, and translation methods.
What's hot (20)
Easy IP Addressing and Subnetting Manual for Starters
Easy IP Addressing and Subnetting Manual for Starters
Similar to What is my IP address by Truly Explorer
Understanding IP Addresses.pptx
An IP address is a unique string of numbers assigned to every internet-connected device to identify its location and allow communication between devices on the internet. There are two main types: IPv4 addresses consisting of four numbers separated by dots, and IPv6 addresses which are longer strings of numbers and letters. IP addresses allow users to access websites and share information online by identifying their devices.
What is IPv6?
What is IPv6? IPv6 is the successor to IPv4, the Internet addressing protocol which has been used for many years since the early days of the Internet.
Ip address
The document discusses IP addresses and related networking concepts. It defines an IP address as a 32-bit logical address assigned to computers and networking devices to identify them on a network. IP addresses are divided into four octets with 8 bits each. The IANA manages global IP address space allocations. Private IP addresses are used for local networks and do not route over the public internet, while public IPs are required to access the internet. There are different classes of IP addresses that define ranges for different network sizes. IP version 6 is the next generation 128-bit IP addressing system currently under development.
Computer network lab note 2
This document provides information about computer networks and IP addresses. It defines what an IP address is and how it is structured as a set of numbers separated by periods. IP addresses are allocated by IANA and ICANN to uniquely identify devices connected to the internet or a local network. The document discusses how IP addresses work to allow communication between connected devices and describes different types of IP addresses including private, public, dynamic, static, shared, and dedicated IP addresses.
Ip address
An IP address is a unique number assigned to each computer or device on the internet. It consists of four numbers separated by periods, with each number ranging from 0 to 255. The IP address identifies both the specific device and the network it belongs to. By using a Whois lookup service, one can input an IP address and learn information about the owner such as their name, email, phone number, and physical address. This can provide useful details for identifying a "hacker" or other owner of an IP address.
How to know my ip address with iplogger.org
The internet is a big phenomenon in today’s world and an IP address allows the computers to connect with other devices over the internet. Let us take an example to understand the phenomenon.
IP Address
This document discusses IP technology, including:
- What an IP address is and its structure as consisting of 4 octets with 8 bits each for a total of 32 bits, encoding a network and host prefix.
- The two main versions of IP - IPv4 uses 32-bit addresses limiting the address space, while IPv6 uses 128-bit addresses vastly expanding the available addresses.
- The different classes of IP addresses (A, B, C, D, E) which determine the maximum number of hosts and networks available in each class.
Network addresses.pptx
An IP address is a unique string of numbers that identifies devices on the internet or a local network. There are two main types of IP addresses: IPv4 addresses, which have been in use for over 35 years, and IPv6 addresses, which are gradually replacing IPv4 due to IPv4 address exhaustion. IP addresses can be public, providing outside access to a network, or private for internal network use. Subnet masks allow IP addresses to be divided into a network and host portion to better organize large networks.
Computer Networks Slide.pptx
Computer networks are a fundamental aspect of modern technology, enabling computers to communicate and share information with one another. This presentation will provide an overview of computer networks, covering topics such as network architecture, network topologies, network protocols, and network security. Participants will learn about different types of networks, such as LANs (Local Area Networks), WANs (Wide Area Networks), and the Internet. We will also discuss the different components of a network, including routers, switches, and servers, as well as the protocols used to transmit data across networks. Additionally, the presentation will cover topics related to network security, including firewalls, intrusion detection and prevention, and encryption. By the end of the presentation, participants will have a solid understanding of computer networks and the role they play in modern computing.
IPv4 vs IPv6 Know the Difference Between Two IP Versions.pdf
The Internet of Things (IoT) keeps on developing exponentially, and more gadgets associate online day by day. There has been dread that, sooner or later, IP locations would simply run out. This guess is beginning to work out as expected. Don’t have any fear; the Internet isn’t reaching an end.
https://www.temok.com/blog/ipv4-vs-ipv6/
Unit 9 Research Paper
IPv4, developed in 1970, was expected to meet networking needs but became insufficient as the internet grew. In 1994, IPv6 was developed with a vastly larger 128-bit address size to avoid IPv4's address exhaustion issues. While IPv4 uses 32-bit addressing and dotted decimal notation, IPv6 uses hexadecimal addresses separated by colons. IPv6 will provide enough addresses for every person on Earth multiple times and support continued growth as we transition away from IPv4.
Modern networking for php developers - Dutch PHP conference 2015
Many developers are stuck in the world of old-school IPv4 - it's an easy and comfortable place to be! But beneath the cosy world of PHP, your network layer has been undergoing major changes that might be outside your comfort zone. IPv6, SPDY (aka HTTP/2.0) and SSL are all important technologies that you need to get to grips with, both inside and outside PHP. This talk covers the key features of these technologies and how you can use them to improve your app's availability, performance and security.
This talk was presented at the Dutch PHP conference 2015
IPv6: What Why and How
IPv6 is the successor to the current IPv4 protocol and is necessary because we are running out of IPv4 addresses. While IPv6 has been defined for over 15 years, adoption has been slow because NAT allows the continued use of IPv4 by making addresses shared. However, NAT causes problems for applications and means devices cannot directly communicate. Major networks are now adopting IPv6, so transition is needed to maintain connectivity. Options for transition include running dual stack IPv4 and IPv6 networks, using IPv6-only with NAT64 for IPv4 connectivity, or adopting dual stack for servers and NAT64 for IPv4 clients.
Footprinting-and-the-basics-of-hacking
Footprinting is the process of gathering public information about a computer system and its owning organization in order to learn as much as possible without accessing the system directly. The document provides an overview of open source footprinting techniques like whois lookups and examining a website's HTML, as well as port scanning and DNS interrogation. As an example, the author footprints the website 2600slc.org, discovering its IP address, admin contact details from the whois record, and open ports including FTP, SSH, SMTP, and HTTP. The information gathered through footprinting can be used to better attack or protect a system.
DMIEXPO - Ajay Goyal - Maximum ROI in Bulk Emailing by IPv6 – Optimum deliver...
Following are the main points:
1. What is the meaning, purpose and importance of IPs?
2. What is the meaning of IPv4 and IPv6?
3. What is the role of IPs in Bulk Emailing?
4. Why IPv4 is an obsolete version in Bulk Emailing?
5. How to get maximum in-boxing by sending email through IPv6?
6. How to get maximum deliverability by sending email through IPv6?
7. How to avoid spamming protection even though using 3rd party or purchased list?
8. How to ensure delivery to TLDs, even after their protection?
9. How can cost be reduced by using IPv6?
10. How to get faster deliverability (fastest) through IPv6?
11. How to get page one ranking at google SERP (Search Engine Ranking Page) while using IPv6?
12. Why IPv6 is faster than IPv4 and how does it create effect on the performance in Bulk Emailing?
Class note 4
IP addresses are unique identifiers for devices connected to a network. There are four main types of IP addresses: public, private, static, and dynamic. Public IP addresses identify a device outside a network and are assigned by an ISP, while private IP addresses identify devices within a local network. Static IP addresses remain the same, whereas dynamic IP addresses can change over time. When data is sent between devices on different networks, routers use IP addresses to direct internet traffic to the proper destination.
IPV6 is the replacement for IPV4. This shows a lack of vision when t.pdf
In aqueous solution, Cd2+will precipitate out of solution in the form of CdS in the presence of
hydrogen sulfide (H2S). The Ksp of CdS = 1.0 x 10-28 and Ksp of H2S = 1.0 x 10-26 for the
reaction: H2S (aq) = 2 H+(aq) + S2-(aq)
a. Write the balanced net ionic equation for the reaction of cadmium ion with hydrogen sulfide
to form cadmium sulfide solid.
b. Write the equilibrium expression for the equation in part a.
c. Calculate Koverall for the reaction in part a.
d. Calculate the [Cd2+] in a solution saturated with H2S (0.10 M) at a pH = 2.00 ([H+] = 0.010
M).
Solution
a) The balanced ionic equation for the formation of cadmium sulfide from cadmium ion and
hydrogen sulfide is given as
Cd2+ (aq) + H2S (aq) <=======> CdS (s) + 2 H+ (aq) ……..(1)
b) The equilibrium constant for the reaction is given as
Koverall = [H+]2/[Cd2+][H2S] (ans)
Note that the concentration of a solid is not written in the expression for the equilibrium
constant.
c) Write down the two ionization reactions as below.
CdS (s) <=======> Cd2+ (aq) + S2- (aq) ……..(2)
Ksp = [Cd2+][S2-]
H2S (aq) <=======> 2 H+ (aq) + S2- (aq) …….(3)
Ka = [H+]2[S2-]/[H2S]
Subtract (2) from (3) and obtain
Cd2+ (aq) + H2S (aq) <======> CdS (s) + 2 H+ (aq)
Koverall = [H+]2/[Cd2+][H2S] = ([H+]2/[H2S])*(1/[Cd2+])
= ([H+]2[S2-]/[H2S])*1/([Cd2+][S2-]
= Ka*1/Ksp
= (1.0*10-26)*1/(1.0*10-28) = 100 (ans).
d) We have [H2S] = 0.10 M and pH = 2.00.
We define pH as pH = -log [H+]
====> 2.00 = -log [H+]
====> [H+] = antilog (-2.00) = 0.01 M
Since Ka (H2S) is extremely small, we may assume the equilibrium concentration of H2S to be
equal to 0.10 M; hence, we have
Koverall = [H+]2/[Cd2+][H2S]
====> 100 = (0.01)2/[Cd2+].(0.10)
====> [Cd2+] = (0.01)2/(100*0.10) = 1.0*10-5
The concentration of Cd2+ at equilibrium is 1.0*10-5 M (ans)..
what/why/how of IPv6 || 2002:3239:43c3::1
IPv6 is the successor to IPv4 and was developed to address the problem of IPv4 running out of addresses. IPv6 implements a new 128-bit addressing system that provides many more addresses than IPv4. Transitioning to IPv6 is important for businesses to allow for personalized content, targeted advertising, and to avoid issues with widespread network address translation. Individuals and organizations can obtain IPv6 access through their ISP's native implementation, by using tunneling services like Tunnelbroker.net, or via protocols like 6to4 and Teredo that tunnel IPv6 traffic over IPv4 networks.
Modern networking for php developers (PHP Dorset)
Modern networking for php developers - IPv6, SSL, SPDY and HTTP/2. Talk given at PHPDorset meetup, July 6th 015.
What is Subnet Mask.pptx
What is Subnet mask
By setting the host bits to all 0s and the network bits to all 1, a 32-bit integer known as a subnet mask is produced. The subnet mask divides the IP address into the network address and host address in this manner. A broadcast address is always associated with the "255" address, while a network address is always associated with the "0" address.
A subnet, or subnetwork, is a network inside a network. Subnets make networks more efficient. Through subnetting, network traffic can travel a shorter distance without passing through unnecessary routers to reach its destination.
Similar to What is my IP address by Truly Explorer (20)
IPv4 vs IPv6 Know the Difference Between Two IP Versions.pdf
IPv4 vs IPv6 Know the Difference Between Two IP Versions.pdf
Modern networking for php developers - Dutch PHP conference 2015
Modern networking for php developers - Dutch PHP conference 2015
DMIEXPO - Ajay Goyal - Maximum ROI in Bulk Emailing by IPv6 – Optimum deliver...
DMIEXPO - Ajay Goyal - Maximum ROI in Bulk Emailing by IPv6 – Optimum deliver...
IPV6 is the replacement for IPV4. This shows a lack of vision when t.pdf
IPV6 is the replacement for IPV4. This shows a lack of vision when t.pdf
Recently uploaded
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Recently uploaded (20)
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
What is my IP address by Truly Explorer
- 1. What is an IP address.
- 2. IP Address or Internet Protocol address An IP is the most common thing among us or on the internet although we have never thought about it. Basically, IP is very common on the internet. Every computer, mobile, router, server, or website is assigned a numerical value and that value is known as the IP address. Do you know? what is my IP ? is one of the most searched questions on Google. If you want to know about your IP address it means you know it’s virtually attached to your system. But an IP address is more than that. In this post, I will tell you some basic information about IP addresses.
- 3. Versions of IP addresses There are basically two versions of the IP addresses. IPv4 and IPv6. IPv4 addresses are the most common type of IP addresses. Most of the device uses IPv4 addresses it’s most common. it consists of four groups of numerical values separated by the dots and kind of look like this: 192.168.0.1 On the other hand, IPv6 addresses are different from IPv4 addresses. It uses numerical letters and uses the colon as a separator instead of the dot. It comes into existence after the internet was running out of IPv4 addresses. Nowadays millions or trillions of IP addresses are in use. but most of the most devices works on IPv4. and these IPv6 addresses are looks like this : 2001:0db8:85a3:0000:0000:8a2e:0370:7334
- 4. Type of IP These are the basic type of the IP addresses. In this article i will not cover a lot or make you feel bore. Lets comes to the main thing ” what is my IP Address” and how can you find it. •Public •Private •Static •Dynamic
- 5. What is my IP address By using your Operating system. •Firstly go to your Network and sharing center •now click on the connected network. •after clicking there click on the details. •after clicking on that tab you can see a new windows pop-up menu will appear. •on that menu, you can notice that all IP address are mentioned •You can find the IPv6 or IPv4 address of your pc from there.
- 6. By using Command Prompt Command prompt is also one of the easy way to search you IP address. •Start command prompt by searching cmd in the Search bar of windows. •Now simply type ‘ipconfig” on the screen. •it will show you all of your IPv4 and IPv6 addresses. By using online sites There are lot of sites which will help in searching online IP addresses. i will mention site below some sites which will help you to search you IP address online. •Whatismyipaddress.com •whatismyip.com
- 7. If you liked my post please do subscribe and share this content. Thanks for Watching Trulyexplorer.com