This document provides an overview of storm sewer and culvert solutions presented in a webinar by Armtec Infrastructure Inc. It discusses flexible pipe materials like corrugated HDPE and steel-reinforced HDPE pipes. HDPE pipes are lightweight with uniform pressure distribution and lower bearing pressure than rigid pipes. Corrugated steel pipes discussed include helical-locked Hel-Cor pipes and spiral-ribbed Ultra-Flo pipes available in various diameters, thicknesses, and coatings. The document also outlines Armtec as a provider of drainage engineering support and design-build services for infrastructure projects.
Keep it Running! – Surface Drainage 201 – Design Basics for Modular Trench Dr...Communications Branding
Join Dominic Turner and Jamie Kershaw for Surface Drainage 201, the interesting conclusion to our 2 part series on Surface Drainage!
The presenters will begin by reviewing key features of modular trench drains and then get into the fascinating step-by-step process for selecting the right modular trench drain system for a project. Key considerations they will cover include system durability and site conditions. You will also learn how to determine the load category for a specific application. The presenters will finish by reviewing the basics of hydraulic calculations for trench drain sizing.
Join Ron Prychitko & Lorne Mielty for an overview of various Bridge-Plate, Multi-Plate and Tunnel Liner Plate applications. Through the presentation of various case studies they will cover product selection criteria for corrugated steel plate structures and best practices including assembly and installation.
Case study examples will include bridges, culverts, wildlife passes, mine portals, pedestrian tunnels and more.
What You’ll Learn:
-Learn about unique applications that solve demanding -problems
-Advantages of soil/steel structures
-Construction process for structures
-Available product, application and design resources
-General Canadian Codes and Standards will be referenced
Who Should Attend
-Bridge / Structural Engineers
-Municipal & Transportation Engineers
-Municipal, Provincial and Federal Infrastructure personnel
-Developers
-Earthworks & Highways Contractors
-Mining Engineers & Contractors
-Road Superintendents
Join Doug Lowry, P.Eng. and Drew Willms for a presentation will focused on how engineered solutions can assist in overcoming challenging project constraints. The presenters will discuss a variety of case studies in which economical and innovative solutions were used to eliminate unique project constraints-whether financial, physical, or time-dependent in nature.
Case study examples will include difficult bridge & stream crossings, culvert rehabilitations and stormwater detention systems.
What you will learn:
-How engineered products can be used to address difficult project constraints
-Selection criteria for various steel coatings
Who should attend:
-Transportation Engineers
-Road Superintendents
-Provincial Departments of Transport
-Bridge / Structural Engineers
-Earthworks & Highways Contractors
-Mining Contractors
-Mining Engineers
-Municipal Engineers
Culvert Design 201 Structural Design, Durability & ApplicationsPath Marketing Inc.
Randy McDonald, Armtec Drainage’s Director of Engineering and Frank Klita, Senior Sales Representative build on the basics of culvert design covered in Culvert Design 101 and will focus in- depth on the structural design of culverts. Additionally, the presenters will review considerations and best practices for culvert installations.
You'll Learn:
Culvert types & applications
- Structural design of culverts and buried structures as per CHBDC (Canadian Highway Bridge Design Code) methods
- Installation best practices
- Review of applications across Canada
Let it Flow! Culvert Design 101 – Basic Hydraulics, Culvert Location & End Tr...Communications Branding
Patrick Biro and Roger Goobie for Culvert Design 101, an overview of culvert solutions! The presenters will begin by reviewing basic culvert hydraulics and will then discuss considerations in the selection of culvert locations. They will finish up with reviewing the necessity of, and best practices in, end-treatment selection. Various culvert products will be highlighted including Hel-Cor, BOSS 2000, and Multi-Plate.
Culvert Design 101 is the first of a 2-part series reviewing culvert design and solutions.
What You'll Learn
Culvert types & applications
Basic hydraulics
Best practices in culvert design and location
Appropriate end treatments for culverts
Review of case studies and applications across Canada
Doug Leitch and Dominic Turner for ‘Armtec Engineering’s Top Picks! – Case Studies & Design Review!’ the exciting conclusion to our 2016 webinar program! This will be an in depth look at the design and installation challenges and solutions of major drainage projects.
The projects discussed will feature both Engineered Steel and Surface Trench drainage products and will review the design theory behind the designs as well as the selection criteria and final installation challenges and procedures. Hosted by Professional Engineers, join us to learn why the owners and consultants of the featured projects used the solutions they did!
oin Heba Ahmed and Drew Willms for Soil Steel Structures & End Treatments – Design Basics. The presenters will begin with an overview of the benefits of buried plate structures and will then go over design basics, coating options, shapes and custom fittings. They will finish up with reviewing the necessity of, and best practices in, end-treatment selection.
Various soil steel structures will be highlighted including Bridge-Plate, Multi-Plate, Bin-Wall and Sheeting as well as different wall materials used as end treatments.
Who Should Attend
Bridge / Structural Engineers
Road & Transportation Engineers
Road Superintendents
Provincial Departments of Transport
Earthworks & Highways Contractors
Mining Contractors
Mining Engineers
Municipal Engineers
Forestry Contractors
What You'll Learn
Benefits and applications of buried plate structures
Design considerations
Choosing the right coating for the project application
End treatment options and selection criteria
Review of case studies and applications across Canada
Think outside the box (culvert): How creativity sells more precastHamilton_Kent
Highlighting three important projects that are creating opportunities for producers of box sections, simply by utilizing an existing product in new ways and with new requirements.
Keep it Running! – Surface Drainage 201 – Design Basics for Modular Trench Dr...Communications Branding
Join Dominic Turner and Jamie Kershaw for Surface Drainage 201, the interesting conclusion to our 2 part series on Surface Drainage!
The presenters will begin by reviewing key features of modular trench drains and then get into the fascinating step-by-step process for selecting the right modular trench drain system for a project. Key considerations they will cover include system durability and site conditions. You will also learn how to determine the load category for a specific application. The presenters will finish by reviewing the basics of hydraulic calculations for trench drain sizing.
Join Ron Prychitko & Lorne Mielty for an overview of various Bridge-Plate, Multi-Plate and Tunnel Liner Plate applications. Through the presentation of various case studies they will cover product selection criteria for corrugated steel plate structures and best practices including assembly and installation.
Case study examples will include bridges, culverts, wildlife passes, mine portals, pedestrian tunnels and more.
What You’ll Learn:
-Learn about unique applications that solve demanding -problems
-Advantages of soil/steel structures
-Construction process for structures
-Available product, application and design resources
-General Canadian Codes and Standards will be referenced
Who Should Attend
-Bridge / Structural Engineers
-Municipal & Transportation Engineers
-Municipal, Provincial and Federal Infrastructure personnel
-Developers
-Earthworks & Highways Contractors
-Mining Engineers & Contractors
-Road Superintendents
Join Doug Lowry, P.Eng. and Drew Willms for a presentation will focused on how engineered solutions can assist in overcoming challenging project constraints. The presenters will discuss a variety of case studies in which economical and innovative solutions were used to eliminate unique project constraints-whether financial, physical, or time-dependent in nature.
Case study examples will include difficult bridge & stream crossings, culvert rehabilitations and stormwater detention systems.
What you will learn:
-How engineered products can be used to address difficult project constraints
-Selection criteria for various steel coatings
Who should attend:
-Transportation Engineers
-Road Superintendents
-Provincial Departments of Transport
-Bridge / Structural Engineers
-Earthworks & Highways Contractors
-Mining Contractors
-Mining Engineers
-Municipal Engineers
Culvert Design 201 Structural Design, Durability & ApplicationsPath Marketing Inc.
Randy McDonald, Armtec Drainage’s Director of Engineering and Frank Klita, Senior Sales Representative build on the basics of culvert design covered in Culvert Design 101 and will focus in- depth on the structural design of culverts. Additionally, the presenters will review considerations and best practices for culvert installations.
You'll Learn:
Culvert types & applications
- Structural design of culverts and buried structures as per CHBDC (Canadian Highway Bridge Design Code) methods
- Installation best practices
- Review of applications across Canada
Let it Flow! Culvert Design 101 – Basic Hydraulics, Culvert Location & End Tr...Communications Branding
Patrick Biro and Roger Goobie for Culvert Design 101, an overview of culvert solutions! The presenters will begin by reviewing basic culvert hydraulics and will then discuss considerations in the selection of culvert locations. They will finish up with reviewing the necessity of, and best practices in, end-treatment selection. Various culvert products will be highlighted including Hel-Cor, BOSS 2000, and Multi-Plate.
Culvert Design 101 is the first of a 2-part series reviewing culvert design and solutions.
What You'll Learn
Culvert types & applications
Basic hydraulics
Best practices in culvert design and location
Appropriate end treatments for culverts
Review of case studies and applications across Canada
Doug Leitch and Dominic Turner for ‘Armtec Engineering’s Top Picks! – Case Studies & Design Review!’ the exciting conclusion to our 2016 webinar program! This will be an in depth look at the design and installation challenges and solutions of major drainage projects.
The projects discussed will feature both Engineered Steel and Surface Trench drainage products and will review the design theory behind the designs as well as the selection criteria and final installation challenges and procedures. Hosted by Professional Engineers, join us to learn why the owners and consultants of the featured projects used the solutions they did!
oin Heba Ahmed and Drew Willms for Soil Steel Structures & End Treatments – Design Basics. The presenters will begin with an overview of the benefits of buried plate structures and will then go over design basics, coating options, shapes and custom fittings. They will finish up with reviewing the necessity of, and best practices in, end-treatment selection.
Various soil steel structures will be highlighted including Bridge-Plate, Multi-Plate, Bin-Wall and Sheeting as well as different wall materials used as end treatments.
Who Should Attend
Bridge / Structural Engineers
Road & Transportation Engineers
Road Superintendents
Provincial Departments of Transport
Earthworks & Highways Contractors
Mining Contractors
Mining Engineers
Municipal Engineers
Forestry Contractors
What You'll Learn
Benefits and applications of buried plate structures
Design considerations
Choosing the right coating for the project application
End treatment options and selection criteria
Review of case studies and applications across Canada
Think outside the box (culvert): How creativity sells more precastHamilton_Kent
Highlighting three important projects that are creating opportunities for producers of box sections, simply by utilizing an existing product in new ways and with new requirements.
Urbanization and Extreme Weather Effects: How Stormwater Detention, Retention...Communications Branding
Extensive urbanization and extreme weather conditions such as heavy rains and floods have increased the frequency, magnitude, volume and pollution of storm runoff.
Join Tony Tekly and Ramtin Zojaji as they describe how detention, retention, infiltration and treatment solutions can minimize the effects of storm runoff, using a variety of materials. The webinar will also review layouts and accessories as well as an extensive list of case studies showing examples of installations across Canada.
What You'll Learn
-The growing need for Stormwater systems
- Difference between Detention, Retention and Infiltration
- Advantages of the different solutions
- On-site installation procedure overview
- Overview of available Stormwater treatment and management systems
- Details and benefits of the Vortechs and Vortsentry treatment systems
- Review of case studies and applications across Canada
Linear Surface Drainage 101: Trench Drain Applications
Learn about the benefits of linear surface drainage over traditional point drainage, and then dive in to discuss modular trench drain features, system configurations and design options.
Highlights of a variety of applications where modular trench drain systems can be used and provide practical examples through a selection of case studies.
Surface Drainage 101 is the first of an exciting 2-part series reviewing linear drainage solutions. Surface Drainage 201 will also be presented on March 18, 2016 so stay tuned for updates!
Presenters:
Dominic Turner, Ing.
National Sales Engineer – HAURATON Products, Armtec Drainage Solutions
Jamie Kershaw, B.Sc. (Hons), MIEx
International Key Account Manager, HAURATON GmbH
Join Jim McKay & Slavek Piotrowski for an introduction to ARCIS – the world’s first ultra-thin, lightweight prestressed architectural precast panel.
The presenters will begin by reviewing current architectural precast concrete solutions, then introduce the ARCIS product line and its unique attributes. A brief overview of how the technology works to produce a strong but thin and light panel and a complete overview of architectural applications for ARCIS will follow.
The session will conclude with installation procedures, design considerations and other uses for the Arcis technology.
ARCIS has been used in the full spectrum of projects from residential high-rise, low-rise, retail storefronts, hospitals, malls, universities, public buildings, stadiums and marinas.
Applications include:
- Architectural facades & rain screens
- Ventilated facades & sunscreens
- Décor, accent walls and interior accents
- Louvers and fins
- Decking
- Stair Treads
Join Phil Taylor of Hydro International, for an informative introduction to their stormwater treatment solutions offered through Armtec! The presentation will introduce a range of treatment products, how they work, their application and regulatory status. There will be a particular focus on Oil Grit Separators (OGS), detailing sizing and installation configuration options, and maintenance.
What You'll Learn
Stormwater treatment products and their application
Pollutants that are best addressed by each treatment system
Influence of sizing methods on separators
A greater understanding of the OGS (Oil Grit Separator) industry
Some stuff you did not know, you did not know…
Patrick Biro, P. Eng. & Dave Groot will provide a complete overview of common tunnel liner and tunnel rehabilitation solutions in Canada. The presentation will include various trenchless solutions for tunneling and relining, including structural plate, corrugated steel & plastic pipe, steel-reinforced polyethylene pipe and spiral wound liners.
Doug Leitch, P.Eng & Glenn Smith, CET provide an introduction to the use of soil-steel structures for haul road grade separations, mine portals, reclaim stacker tunnels, manway escape tunnels and underground raise bore.
Discussion centres on design considerations and common practices, and will present project case studies from some of the world’s largest miners.
Discussion Topics:
- Mine Haul Road Bridges – Important Considerations for Today's Mining Trucks
- Reclaim and Stockpile Tunnel Design – Cost Saving Strategies
- Important Considerations in the Selection of a Portal
- Retaining Wall Systems for Underground Applications
What You’ll Learn:
- Design parameters to consider for heavy mining equipment
The effect of seismic activity in design
- Life expectancy and the importance of life cycle costing in mining projects
- On-site installation procedures for various solutions
Intended Audience:
- Mining Engineers
- Consulting Structural Engineers
- Geotechnical Engineers
- Mining Contractors
- Mine Managers
Speaker: Doug Leitch, P. Eng
Position: Manager International Sales
Company: Armtec Drainage Solutions
Doug has extensive experience in the civil and mining engineering field. In his 25+ years with Armtec he has been involved in the design, and specification of an array of drainage and structural projects and has managed some of Armtec’s largest mining projects in almost twenty countries on six different continents.
Doug has been involved in international business for 10 years, is a member of Professional Engineers of Ontario and holds a Bachelor of Science in Engineering from the University of Guelph, Guelph, Ontario.
Speaker: Glenn Smith, CET
Position: Sales Supervisor, Atlantic
Company: Armtec Drainage Solutions
Glenn has worked for Armtec for over 15 years and has been involved with the specification of Armtec’s engineered products throughout Atlantic Canada. He has supervised the installation of numerous large scale Multi-Plate, Bridge-Plate and Bin-Wall projects throughout the region.
Glenn is a certified engineering technologist and a member of the Association of Engineering Technicians and Technologists of Newfoundland and Labrador.
Corrugated Steel Bridge and Tunnel Solutions Agata Woźniak
Join Ron Prychitko & Lorne Mielty for an overview of various Bridge-Plate, Multi-Plate and Tunnel Liner Plate applications. Through the presentation of various case studies they will cover product selection criteria for corrugated steel plate structures and best practices including assembly and installation.
Case study examples will include bridges, culverts, wildlife passes, mine portals, pedestrian tunnels and more.
What You’ll Learn:
-Learn about unique applications that solve demanding -problems
-Advantages of soil/steel structures
-Construction process for structures
-Available product, application and design resources
-General Canadian Codes and Standards will be referenced
Who Should Attend
-Bridge / Structural Engineers
-Municipal & Transportation Engineers
-Municipal, Provincial and Federal Infrastructure personnel
-Developers
-Earthworks & Highways Contractors
-Mining Engineers & Contractors
-Road Superintendents
Urbanization and Extreme Weather Effects: How Stormwater Detention, Retention...Communications Branding
Extensive urbanization and extreme weather conditions such as heavy rains and floods have increased the frequency, magnitude, volume and pollution of storm runoff.
Join Tony Tekly and Ramtin Zojaji as they describe how detention, retention, infiltration and treatment solutions can minimize the effects of storm runoff, using a variety of materials. The webinar will also review layouts and accessories as well as an extensive list of case studies showing examples of installations across Canada.
What You'll Learn
-The growing need for Stormwater systems
- Difference between Detention, Retention and Infiltration
- Advantages of the different solutions
- On-site installation procedure overview
- Overview of available Stormwater treatment and management systems
- Details and benefits of the Vortechs and Vortsentry treatment systems
- Review of case studies and applications across Canada
Linear Surface Drainage 101: Trench Drain Applications
Learn about the benefits of linear surface drainage over traditional point drainage, and then dive in to discuss modular trench drain features, system configurations and design options.
Highlights of a variety of applications where modular trench drain systems can be used and provide practical examples through a selection of case studies.
Surface Drainage 101 is the first of an exciting 2-part series reviewing linear drainage solutions. Surface Drainage 201 will also be presented on March 18, 2016 so stay tuned for updates!
Presenters:
Dominic Turner, Ing.
National Sales Engineer – HAURATON Products, Armtec Drainage Solutions
Jamie Kershaw, B.Sc. (Hons), MIEx
International Key Account Manager, HAURATON GmbH
Join Jim McKay & Slavek Piotrowski for an introduction to ARCIS – the world’s first ultra-thin, lightweight prestressed architectural precast panel.
The presenters will begin by reviewing current architectural precast concrete solutions, then introduce the ARCIS product line and its unique attributes. A brief overview of how the technology works to produce a strong but thin and light panel and a complete overview of architectural applications for ARCIS will follow.
The session will conclude with installation procedures, design considerations and other uses for the Arcis technology.
ARCIS has been used in the full spectrum of projects from residential high-rise, low-rise, retail storefronts, hospitals, malls, universities, public buildings, stadiums and marinas.
Applications include:
- Architectural facades & rain screens
- Ventilated facades & sunscreens
- Décor, accent walls and interior accents
- Louvers and fins
- Decking
- Stair Treads
Join Phil Taylor of Hydro International, for an informative introduction to their stormwater treatment solutions offered through Armtec! The presentation will introduce a range of treatment products, how they work, their application and regulatory status. There will be a particular focus on Oil Grit Separators (OGS), detailing sizing and installation configuration options, and maintenance.
What You'll Learn
Stormwater treatment products and their application
Pollutants that are best addressed by each treatment system
Influence of sizing methods on separators
A greater understanding of the OGS (Oil Grit Separator) industry
Some stuff you did not know, you did not know…
Patrick Biro, P. Eng. & Dave Groot will provide a complete overview of common tunnel liner and tunnel rehabilitation solutions in Canada. The presentation will include various trenchless solutions for tunneling and relining, including structural plate, corrugated steel & plastic pipe, steel-reinforced polyethylene pipe and spiral wound liners.
Doug Leitch, P.Eng & Glenn Smith, CET provide an introduction to the use of soil-steel structures for haul road grade separations, mine portals, reclaim stacker tunnels, manway escape tunnels and underground raise bore.
Discussion centres on design considerations and common practices, and will present project case studies from some of the world’s largest miners.
Discussion Topics:
- Mine Haul Road Bridges – Important Considerations for Today's Mining Trucks
- Reclaim and Stockpile Tunnel Design – Cost Saving Strategies
- Important Considerations in the Selection of a Portal
- Retaining Wall Systems for Underground Applications
What You’ll Learn:
- Design parameters to consider for heavy mining equipment
The effect of seismic activity in design
- Life expectancy and the importance of life cycle costing in mining projects
- On-site installation procedures for various solutions
Intended Audience:
- Mining Engineers
- Consulting Structural Engineers
- Geotechnical Engineers
- Mining Contractors
- Mine Managers
Speaker: Doug Leitch, P. Eng
Position: Manager International Sales
Company: Armtec Drainage Solutions
Doug has extensive experience in the civil and mining engineering field. In his 25+ years with Armtec he has been involved in the design, and specification of an array of drainage and structural projects and has managed some of Armtec’s largest mining projects in almost twenty countries on six different continents.
Doug has been involved in international business for 10 years, is a member of Professional Engineers of Ontario and holds a Bachelor of Science in Engineering from the University of Guelph, Guelph, Ontario.
Speaker: Glenn Smith, CET
Position: Sales Supervisor, Atlantic
Company: Armtec Drainage Solutions
Glenn has worked for Armtec for over 15 years and has been involved with the specification of Armtec’s engineered products throughout Atlantic Canada. He has supervised the installation of numerous large scale Multi-Plate, Bridge-Plate and Bin-Wall projects throughout the region.
Glenn is a certified engineering technologist and a member of the Association of Engineering Technicians and Technologists of Newfoundland and Labrador.
Corrugated Steel Bridge and Tunnel Solutions Agata Woźniak
Join Ron Prychitko & Lorne Mielty for an overview of various Bridge-Plate, Multi-Plate and Tunnel Liner Plate applications. Through the presentation of various case studies they will cover product selection criteria for corrugated steel plate structures and best practices including assembly and installation.
Case study examples will include bridges, culverts, wildlife passes, mine portals, pedestrian tunnels and more.
What You’ll Learn:
-Learn about unique applications that solve demanding -problems
-Advantages of soil/steel structures
-Construction process for structures
-Available product, application and design resources
-General Canadian Codes and Standards will be referenced
Who Should Attend
-Bridge / Structural Engineers
-Municipal & Transportation Engineers
-Municipal, Provincial and Federal Infrastructure personnel
-Developers
-Earthworks & Highways Contractors
-Mining Engineers & Contractors
-Road Superintendents
Culvert: A Robust Framework for Secondary Indexing of Structured and Unstruct...Jesse Yates
Ed Kohlwey's presentation at 2011 Hadoop Summit.
Secondary indexing is a common design pattern in BigTable-like databases that allows users to index one or more columns in a table. This technique enables fast search of records in a database based on a particular column instead of the row id, thus enabling relational-style semantics in a NoSQL environment. This is accomplished by representing the index either in a reserved namespace in the table or another index table. Despite the fact that this is a common design pattern in BigTable-based applications, most implementations of this practice to date have been tightly coupled with a particular application. As a result, few general-purpose frameworks for secondary indexing on BigTable-like databases exist, and those that do are tied to a particular implementation of the BigTable model.
We developed a solution to this problem called Culvert that supports online index updates as well as a variation of the HIVE query language. In designing Culvert, we sought to make the solution pluggable so that it can be used on any of the many BigTable-like databases (HBase, Cassandra, etc.). We will discuss our experiences implementing secondary indexing solutions over multiple underlying data stores, and how these experiences drove design decisions in creating the Culvert framework. We will also discuss our efforts to integrate HIVE on top of multiple indexing solutions and databases, and how we implemented a subset of HIVE's query language on Culvert.
Randy McDonald, Armtec Drainage’s Director of Engineering and Frank Klita, Senior Sales Representative, for the exciting second part of our 2-part Culvert series – Culvert Design 201! This presentation will build on the basics of culvert design covered in Culvert Design 101 and will focus in- depth on the structural design of culverts. Additionally, the presenters will review considerations and best practices for culvert installations.
What You'll Learn
Culvert types & applications
Structural design of culverts and buried structures as per CHBDC (Canadian Highway Bridge Design Code) methods
Installation best practices
Review of applications across Canada
Residential electricity usage varies depending on climate and availability of other fuel sources (natural gas, fuel oil, etc.). This presentation looks at average usage by state and how electricity rates and electricity bills vary between different states.
Event Overview
Shane Sherar, will provide a complete overview of Industrial and Retail insulated wall panel applications in Canada. Topics will include, precast production, aesthetic flexibility, design details, installation and best practices.
Who Should Attend:
- Architects
- Developers
- Consulting Engineers
- General Contractors
Product Features
- Custom designed for each building project
- Functional, economical
- Rapid installation, regardless of weather conditions
- Modular panelization can be tailored to accommodate windows, man-doors and loading dock openings
- Full-width rigid insulation can be adjusted in thickness and density to meet specific thermal R-value requirements
- Durable concrete interior and exterior finish
- Load bearing vs non-load bearing
Typical Applications
- Big Box Retail
- Industrial/Warehouse
Product Advantages:
- Complete wall system
- Durable
- Fast all weather construction
- Economical
- Aesthetic flexibility
- Impact, vandal, insulation & more...
What You’ll Learn
- When to consider Insulated Precast wall panels
- What are my design options and limitations
- Best practices
Includes Cases and Project Discussions from Across Canada.
Tunnel Liners, Relines and Rehabilitation Agata Woźniak
Patrick Biro, P. Eng. & Dave Groot will provide a complete overview of common tunnel liner and tunnel rehabilitation solutions in Canada. The presentation will include various trenchless solutions for tunneling and relining, including structural plate, corrugated steel & plastic pipe, steel-reinforced polyethylene pipe and spiral wound liners.
Urbanization and Extreme Weather Effects: How Stormwater Detention, Retention...Agata Woźniak
Extensive urbanization and extreme weather conditions such as heavy rains and floods have increased the frequency, magnitude, volume and pollution of storm runoff.
Join Tony Tekly and Ramtin Zojaji as they describe how detention, retention, infiltration and treatment solutions can minimize the effects of storm runoff, using a variety of materials. The webinar will also review layouts and accessories as well as an extensive list of case studies showing examples of installations across Canada.
What You'll Learn
-The growing need for Stormwater systems
- Difference between Detention, Retention and Infiltration
- Advantages of the different solutions
- On-site installation procedure overview
- Overview of available Stormwater treatment and management systems
- Details and benefits of the Vortechs and Vortsentry treatment systems
- Review of case studies and applications across Canada
Big Digs - Site Development & Underground Solutions for Mining Agata Woźniak
Doug Leitch, P.Eng & Glenn Smith, CET provide an introduction to the use of soil-steel structures for haul road grade separations, mine portals, reclaim stacker tunnels, manway escape tunnels and underground raise bore.
Discussion centres on design considerations and common practices, and will present project case studies from some of the world’s largest miners.
Discussion Topics:
- Mine Haul Road Bridges – Important Considerations for Today's Mining Trucks
- Reclaim and Stockpile Tunnel Design – Cost Saving Strategies
- Important Considerations in the Selection of a Portal
- Retaining Wall Systems for Underground Applications
What You’ll Learn:
- Design parameters to consider for heavy mining equipment
The effect of seismic activity in design
- Life expectancy and the importance of life cycle costing in mining projects
- On-site installation procedures for various solutions
Intended Audience:
- Mining Engineers
- Consulting Structural Engineers
- Geotechnical Engineers
- Mining Contractors
- Mine Managers
Speaker: Doug Leitch, P. Eng
Position: Manager International Sales
Company: Armtec Drainage Solutions
Doug has extensive experience in the civil and mining engineering field. In his 25+ years with Armtec he has been involved in the design, and specification of an array of drainage and structural projects and has managed some of Armtec’s largest mining projects in almost twenty countries on six different continents.
Doug has been involved in international business for 10 years, is a member of Professional Engineers of Ontario and holds a Bachelor of Science in Engineering from the University of Guelph, Guelph, Ontario.
Speaker: Glenn Smith, CET
Position: Sales Supervisor, Atlantic
Company: Armtec Drainage Solutions
Glenn has worked for Armtec for over 15 years and has been involved with the specification of Armtec’s engineered products throughout Atlantic Canada. He has supervised the installation of numerous large scale Multi-Plate, Bridge-Plate and Bin-Wall projects throughout the region.
Glenn is a certified engineering technologist and a member of the Association of Engineering Technicians and Technologists of Newfoundland and Labrador.
Doug Lowry, P.Eng & Ron Prychitko, P.Eng give an overview of various Retaining Wall and Engineered Slope Systems. Discussion will focus on applications and best practices for a variety of wall and slope systems including Durisol Narrow Footprint walls, Bin-Wall, MSE (Precast Face, Lock + Load, Wire Mesh Walls & Slopes), Gabions and Temporary Walls. The presenters will include several case studies and highlight specific earth retention solutions for a variety of criteria including aesthetics.
What You’ll Learn:
- Points to consider when selecting a wall system
- Review of several case studies & applications in Canada
- On-site installation procedure overview for various solutions
Intended Audience:
- Transportation Engineers
- Road Superintendents
- Provincial Departments of Transport
- Bridge / Structural Engineers
- Earthworks & Highways Contractors
- Landscape Architects
Manufacturing & exporting a wide range of industrial products,which includes metal hoses,corrugated hoses,cam lock couplings,goosenecktube fitting & temperature sensor components SUCH A S Metal Flexible Interlock Hoses for Exhaust, Metal Flexible Interlock Hoses for Covering / Liner, Metal Flexible Conduits, Connectors for Metal Conduits, Flexible Corrugated Metal Hoses with single wire braiding, Flexible Corrugated Metal Hoses with double wire braiding, Flex Connectors..
Jetronics India: Your Reliable Source for Superior Circular ConnectorsShikhaT2
Jetronics is a prominent manufacturer and provider of circular connectors, offering top-quality products and services tailored to meet your specific requirements. We pride ourselves on delivering superior quality solutions that prioritize reliability,
Oetiker product range and solutions for the commercial and industrial vehicles industry sector. Exhaust, turbo, thermal management, tank straps applications along with assembly solutions.
Similar to Webinar: Storm Sewer & Culvert Solutions: Applications & Best Practices (20)
Join Andy Lister and Michael McQuaid for an introduction to the design basics behind Geosynthetics and MSE Walls!
The presenters will begin by introducing different geosynthetics and their uses, followed by focusing on geogrid properties and what you need to know when selecting and specifying different geogrids. You will then learn about how mechanically stabilized earth (MSE) retaining walls work. This will include general design requirements, through the review of potential failure modes. The presenters will finish by discussing different MSE retaining wall facing options while highlighting successful past projects.
Mike Edwards will give a complete overview of transportation and environmental noise attenuation solutions, products and systems for highway, rail, intermodal, industrial and residential applications. We will also cover a detailed discussion of considerations for engineers, architects and specifiers.
Bridge-Plate & Multi-Plate Applications and Case Studies (Ron Prychitko, P.Eng.)Communications Branding
Ron Prychitko, P.Eng. & Randy McDonald, P.Eng. will provide a complete overview of Bridge-Plate and Multi-Plate applications in Canada. Please join them for a review of engineering, construction, and performance considerations in various applications. This webinar includes case examples for bridges, culverts, stream enclosures, mine portals, road and rail grade separations, pedestrian tunnels and more.
Bridge-Plate & Multi-Plate Applications and Case Studies (Randy McDonald, P.E...Communications Branding
Ron Prychitko, P.Eng. & Randy McDonald, P.Eng. will provide a complete overview of Bridge-Plate and Multi-Plate applications in Canada. Please join them for a review of engineering, construction, and performance considerations in various applications. This webinar includes case examples for bridges, culverts, stream enclosures, mine portals, road and rail grade separations, pedestrian tunnels and more.
Hollowcore has been around for over 40 years. Learn the basics of Hollowcore as well as some new ideas adapting to environmental needs (LEED) and energy efficiency from this tutorial.
Hollowcore attributes include versatility, creation of long spans and open spaces, fast track construction, control of flexural cracking, zero tension possible in bottom flange, minimal site labour, and low long-term maintenance costs or, in short, VOS-C.
This informative tutorial by industry leading Armtec will provide an introduction to Stormwater treatment and the large number of regulations present in Canada. The tutorial will present a range of products to meet various Stormwater treatment regulations and will provide guidance on proper selection and sizing of the products, which is a key question in the development of many projects. Learn how to achieve greener projects through effective particle removal, water retention and infiltration. Stormwater detention will be addressed during the tutorial.
A range of products and application cases will be covered including the VortSentry, Vortechs and StormFilter units and ChamberMaxx stormwater detention/infiltration products.
Armtec Ltd. specializes in the construction of precast concrete steps and precast concrete decks. This tutorial gives insight into the process from start to finish, explaining the intricate stages in deciding on the perfect precast steps and decks for you. Concrete steps are a fast, durable and cost-effective way of providing access to residences, apartments and condominiums.
Sound Barrier Walls: Design, Usage and Specifications Part 2 - Armtec Ltd. Communications Branding
Part 2 of an informative tutorial by Armtec Ltd. explaining the details behind the construction and design of their sound barrier walls. The tutorial covers the various types of noise barriers and the different designs available for specific applications.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.