gps v
•Download as PPTX, PDF•
0 likes•194 views
This document provides a block diagram and overview of a real-time vehicle tracking system using GPS and GSM. The system includes a power supply, microcontroller, GPS and GSM modems, and LCD display. The power supply steps down voltage and regulates it. The microcontroller collects location data from the GPS and sends it via GSM. This allows remote tracking of vehicles for security, delivery, and rental applications. The system provides security and remote access capabilities.
Report
Share
Report
Share
Recommended
Project presentatiom
This document discusses powerline communication using the X-10 protocol. It describes the application block diagram, simulation of the power supply, and oscilloscope data showing the voltage over time. It also discusses the receiver end, LCD pins, registers used in the PIC microcontroller for timing and options, prescalar values that control delays, and references for further information.
Dsp ic june2013 (2)
Partitioning in circuit design refers to dividing a circuit into smaller parts or blocks. There are different types of partitioning including functional, structural, and hierarchical partitioning. Functional partitioning groups components based on their function, structural partitioning groups based on physical location, and hierarchical partitioning uses both functional and structural grouping at multiple levels.
Propagation delay in CMOS circuits is the time required for a signal to propagate from input to output. It consists of charge time and discharge time. Charge time is the time taken to charge the output node capacitance when input changes from low to high. Discharge time is the time taken to discharge the output node capacitance when input changes from high to low. An expression can be derived for these times using circuit
Antenna cetrek gps data
This document provides specifications for a universal EGNOS/WAAS GPS antenna that delivers sub-3 meter accuracy by decoding GPS correction signals from satellites. The antenna housing encloses a 16-channel GPS engine, interface electronics, and passive antenna in a waterproof plastic casing for easy use. Key specifications include dimensions of 97mm diameter x 32mm height, 160 gram weight, 15m cable, 10-35V input, 0.8W max power, and sub-2.5m position accuracy when receiving WAAS/EGNOS correction signals. The antenna is compatible with various marine electronics systems and offers reliable GPS performance in a simple package.
Original transistor PNP 2SA1023 KTA1023 A1023 1023 TO 92 New
This document provides specifications for the KTA1023 epitaxial planar PNP transistor for high voltage applications. It includes:
1. Maximum ratings for the transistor including collector-base voltage of -120V, collector-emitter voltage of -120V, and collector current of -800mA.
2. Dimensional drawings and specifications for the TO-92L package.
3. Electrical characteristics including collector cut-off current, emitter cut-off current, DC current gain, collector-emitter saturation voltage, and transition frequency.
4. Testing conditions and typical/minimum maximum values for the electrical characteristics.
How to make GPIO Signals to Control Hardware
This document provides information about driving LED modules using a TLC5940 constant current LED driver and M5Stack microcontroller. It describes the hardware connections between these components and the LED modules. It also explains the software implementation for generating pulse width modulation signals to control the brightness of each LED segment with 12-bit resolution at a frequency of 2MHz updated every 16ms.
Original PNP Transistor 2SA684L 2SA684 TO-92 New UNISONIC
This document provides information on the 2SA684 PNP silicon transistor made by Unisonic Technologies Co., Ltd. It includes descriptions of the transistor's features and applications as a power amplifier and driver. Specifications such as maximum ratings, electrical characteristics, and typical performance curves are given. The transistor comes in SOT-23, SOT-89, and TO-92NL packages and has an DC current gain ranging from 50-340 depending on operating conditions.
Electrical Theory Review
This document discusses direct current (DC) and alternating current (AC) circuits. It covers Ohm's law, power dissipation, Kirchhoff's laws, capacitive and inductive reactance, phasors, and RLC circuits. Key points include:
- Ohm's law defines the relationship between current, voltage and resistance in a DC circuit.
- Kirchhoff's laws allow analysis of voltage and current in series and parallel circuits.
- Inductive and capacitive reactance define how inductors and capacitors respectively impede alternating current in an AC circuit.
- Phasors represent AC voltages and currents using complex numbers to facilitate circuit analysis.
- RLC circuits combine resistors,
Yamal-401
The Yamal-401 geostationary communications satellite was launched on December 15, 2014 to an orbital slot of 90°E. It carries 17 C-band and 36 Ku-band transponders to provide communications coverage for Russia. Key specifications include a transmitter output power of 90W for C-band and 150W for Ku-band, with payload power of 10,600W. The satellite is operated by Gazprom Space Systems and provides precision station keeping and orientation within 0.1 degrees.
Recommended
Project presentatiom
This document discusses powerline communication using the X-10 protocol. It describes the application block diagram, simulation of the power supply, and oscilloscope data showing the voltage over time. It also discusses the receiver end, LCD pins, registers used in the PIC microcontroller for timing and options, prescalar values that control delays, and references for further information.
Dsp ic june2013 (2)
Partitioning in circuit design refers to dividing a circuit into smaller parts or blocks. There are different types of partitioning including functional, structural, and hierarchical partitioning. Functional partitioning groups components based on their function, structural partitioning groups based on physical location, and hierarchical partitioning uses both functional and structural grouping at multiple levels.
Propagation delay in CMOS circuits is the time required for a signal to propagate from input to output. It consists of charge time and discharge time. Charge time is the time taken to charge the output node capacitance when input changes from low to high. Discharge time is the time taken to discharge the output node capacitance when input changes from high to low. An expression can be derived for these times using circuit
Antenna cetrek gps data
This document provides specifications for a universal EGNOS/WAAS GPS antenna that delivers sub-3 meter accuracy by decoding GPS correction signals from satellites. The antenna housing encloses a 16-channel GPS engine, interface electronics, and passive antenna in a waterproof plastic casing for easy use. Key specifications include dimensions of 97mm diameter x 32mm height, 160 gram weight, 15m cable, 10-35V input, 0.8W max power, and sub-2.5m position accuracy when receiving WAAS/EGNOS correction signals. The antenna is compatible with various marine electronics systems and offers reliable GPS performance in a simple package.
Original transistor PNP 2SA1023 KTA1023 A1023 1023 TO 92 New
This document provides specifications for the KTA1023 epitaxial planar PNP transistor for high voltage applications. It includes:
1. Maximum ratings for the transistor including collector-base voltage of -120V, collector-emitter voltage of -120V, and collector current of -800mA.
2. Dimensional drawings and specifications for the TO-92L package.
3. Electrical characteristics including collector cut-off current, emitter cut-off current, DC current gain, collector-emitter saturation voltage, and transition frequency.
4. Testing conditions and typical/minimum maximum values for the electrical characteristics.
How to make GPIO Signals to Control Hardware
This document provides information about driving LED modules using a TLC5940 constant current LED driver and M5Stack microcontroller. It describes the hardware connections between these components and the LED modules. It also explains the software implementation for generating pulse width modulation signals to control the brightness of each LED segment with 12-bit resolution at a frequency of 2MHz updated every 16ms.
Original PNP Transistor 2SA684L 2SA684 TO-92 New UNISONIC
This document provides information on the 2SA684 PNP silicon transistor made by Unisonic Technologies Co., Ltd. It includes descriptions of the transistor's features and applications as a power amplifier and driver. Specifications such as maximum ratings, electrical characteristics, and typical performance curves are given. The transistor comes in SOT-23, SOT-89, and TO-92NL packages and has an DC current gain ranging from 50-340 depending on operating conditions.
Electrical Theory Review
This document discusses direct current (DC) and alternating current (AC) circuits. It covers Ohm's law, power dissipation, Kirchhoff's laws, capacitive and inductive reactance, phasors, and RLC circuits. Key points include:
- Ohm's law defines the relationship between current, voltage and resistance in a DC circuit.
- Kirchhoff's laws allow analysis of voltage and current in series and parallel circuits.
- Inductive and capacitive reactance define how inductors and capacitors respectively impede alternating current in an AC circuit.
- Phasors represent AC voltages and currents using complex numbers to facilitate circuit analysis.
- RLC circuits combine resistors,
Yamal-401
The Yamal-401 geostationary communications satellite was launched on December 15, 2014 to an orbital slot of 90°E. It carries 17 C-band and 36 Ku-band transponders to provide communications coverage for Russia. Key specifications include a transmitter output power of 90W for C-band and 150W for Ku-band, with payload power of 10,600W. The satellite is operated by Gazprom Space Systems and provides precision station keeping and orientation within 0.1 degrees.
Power factor correction formula
This document provides a formula and example for calculating the capacitance needed for power factor correction of an induction motor. It explains that adding a capacitor in parallel with a single phase motor reduces the current supplied by the grid. This connection decreases power loss in the supply wires and voltage drop, increasing the voltage at the motor terminals. Power factor correction of an induction motor from 0.8 to unity can reduce wire losses by 36%.
Ensilica qam demapper
This document provides information on the QAM Demapper eSi-7580 chip from EnSilica Limited. It can slice signals into BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM and produce up to 10 log likelihood ratio bit metrics per clock cycle with sustained throughput of 1.5G LLRs/sec. It uses a pipelined structure to efficiently map constellation points to QAM grids, calculate squared distances to nearest constellation points, weight by channel state information and output rounded and saturated log likelihood ratios. For an Altera Cyclone III FPGA, a version supporting up to 1024-QAM requires around 1700 logic elements and 2 multipliers.
ODU channel stacker
The document discusses the development of a new digital single-wire multiplexer (DSWM) for satellite reception that can simultaneously receive 14 input channels using less power than current analog multiplexers. The key aspects of the new DSWM design include digital switching and signal processing circuits integrated into a 45nm chip measuring 30.127mm2. The DSWM is capable of simultaneously receiving and processing 12 satellite channels with a power consumption of only 8W, demonstrating an improvement over existing analog multiplexer technology.
The differences about wecon plc series
The document compares four PLC models: LX3V, LX3VP, LX3VE, and LX3VM. LX3VP adds N:N networking and improves pulse output frequency and ladder capacity over LX3V. LX3VE expands on LX3VP with additions like S-type acceleration/deceleration, jitter pulse support, and E-CAM functions. LX3VM is similar to LX3VE but also includes circle interpolation functionality.
SynergieCAD-V93K-CTH-Configuration_MAR16
This document provides a summary of the configuration of an Advantest 93000 CTH system. It includes details on the instrumentation in two card cages, including the types and quantities of DC power supplies and digital pattern generators. The system is configured with 512 PS1600 digital channels, 192 device power supplies, a 4S/4M MB-AV8+ mixed signal card, and 5V utility power. The location of the system is also listed as Synergie-CAD in Munich.
Original NPN Transistor D468 2SD468 468 TO-92 New
This document provides specifications for the 2SD468 NPN silicon transistor from Unisonic Technologies Co., Ltd. It is described as a low frequency power amplifier that can be used to complement the 2SB562 transistor. The document provides maximum ratings, electrical characteristics, and typical performance curves for the transistor, including DC current gain, saturation voltage, and output capacitance as functions of collector current and voltage.
8086
This document contains 15 multiple choice questions related to computer architecture and microprocessors:
1. It asks about the memory capacity addressable by a 32-bit address bus.
2. It asks which processor family is pipelined.
3. It asks which statement about the 8086 microprocessor is not true, regarding coprocessor interfacing and support for pipelining.
4. It asks about a component that ensures only one integrated circuit is active at a time to avoid bus conflicts, with options like control bus, control decoder, and CPU.
Raspberry Pi I/O控制與感測器讀取
Raspberry Pi I/O控制與感測器讀取:
艾鍗教你從實作中認識物聯網！
https://bit.ly/3kLZhAq
課程使用Raspberry Pi結合ARM mbed Cloud來實現一個物聯網解決方案。你會了解M2M(Machine-to-Machine)網路協定,包含CoAP、MQTT、LWM2M等協定，並藉由Raspberry Pi連接 Cloud。 Raspberry Pi的部份教你連接一些感測器，包含GPIO、數位界面I2C的溫溼度感測器、類比感測器如光感應器等，並將這些感測器成為定義為不同的Resource Path並註冊在mbed cloud中。
本課程將採用Node.js撰寫WebAPP，使用HTTP/RESTful API存取Resource。在實作WebAPP中，除了後端Node.js，你也將會看到後端如何與前端瀏覽器之間要如何溝通的方式，如AJAX或WebSocket
Real time power system operationunder deregulated environmnt
The document discusses the evolution of India's power grid system and electricity market. It provides details on:
1) How India's grid system has expanded from local grids at independence to interconnected regional and national grids. The five regional grids are now synchronized.
2) The peculiar characteristics of different regional grids in India such as hydro and load profiles.
3) How grid operation has improved from a scenario of frequent disturbances to the current availability based tariff system.
4) The introduction of real-time pricing mechanisms like availability based tariff, UI charges, and reactive power charges to encourage efficient grid operation.
5) How the electricity market has evolved from an unbundled system to the current framework
Program LCD ARM
This document describes interfacing a 16x2 LCD display with an ARM LPC2148 microcontroller. It includes code to initialize the LCD in 4-bit and 8-bit modes. Function prototypes and subroutines are provided for sending commands and data to the LCD. A circuit diagram shows the LCD connection to the microcontroller pins for displaying characters on the LCD.
Lec05ek
This document discusses transmission line models and parameters. It defines transmission line parameters such as characteristic impedance and explains that lossless transmission lines have resistance and conductance values of zero. It provides the parameter equations for different common transmission line types including coaxial cable, parallel plates, and microstrip lines. It also defines the voltage reflection coefficient and explains how it is used to characterize impedance mismatches and standing waves on transmission lines.
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
This document provides specifications for the FSP2000-A0AGPBI power supply unit. It can provide up to 2000W of power output and supports 16 graphics cards through its PCI-E connectors. The PSU meets 80Plus Platinum efficiency standards and is suitable for cryptocurrency mining and other high-performance computing applications due to its stable power output, modular design, and ability to operate under high temperatures.
Galil blm n23_catalog
The BLM-N23-50-1000-B brushless servo motor is a low cost, high performance motor well suited for OEM applications. It provides 55 oz-in of continuous torque in a Nema 23 frame size package and has a high torque to inertia ratio, making it ideal for applications requiring fast acceleration and point-to-point motion. The motor has a 1000 line differential quadrature encoder and connects directly to several Galil amplifier models.
OLV1 (Load Flow Analysis) in Synch Mod
This document contains a one-line diagram of an electrical distribution system undergoing a load flow analysis. The diagram shows various buses, generators, transformers, cables, loads and their ratings. It also displays the voltage levels and percentages at each bus.
Original PNP Transistor TIP42CF TIP42 6A 100V TO-220 New
This document provides technical specifications for the TIP42CF epitaxial planar PNP transistor, including:
1) Maximum ratings for collector-base voltage, collector-emitter voltage, emitter-base voltage, collector current, base current, collector power dissipation, and junction/storage temperature range.
2) Electrical characteristics such as collector-emitter saturation voltage, base-emitter on voltage, transition frequency, and current gain.
3) Graphs showing safe operating area, saturation voltage, current gain, and collector power dissipation as a function of other variables.
Sspi day out_2014_teledyne-paul_sandoval
This document summarizes Teledyne Paradise Datacom's Q-Net VSAT solution for providing medium to high utilization satellite communication networks. Key features highlighted include software-defined SCPC modems, fiber transceivers, HPAs, antenna systems, and integrated terminal designs. Financial analysis shows the Q-Net solution provides bandwidth savings of up to 3.6 MHz and cost savings of up to $5.1 million over 36 months compared to traditional SCPC and VSAT networks. Advanced network management capabilities are also discussed.
442166
The document provides technical specifications for the MiniSKiiP® SKiiP 24NAB12T4V1 3-phase bridge rectifier, brake chopper, and 3-phase bridge inverter module. It includes absolute maximum ratings, typical characteristics, mechanical data, and graphs of the module's electrical performance characteristics such as output, current rating vs. temperature, turn-on/off energies, switching times, and more. The module is intended for use in converter, inverter, and brake applications.
Schematic amp
This document contains a circuit diagram for an amplifier. It includes a list of components used in the circuit such as transistors, resistors, capacitors and other electrical components. The diagram shows how the components are connected to create the amplifier circuit. Labels on the diagram indicate power sources, inputs, outputs and other connections between the various components that make up the amplifier.
Cockpit Control Unit CCU-500 Data Sheet (Interface Displays)
The CCU-500 is a cockpit control unit that provides a monochrome alphanumeric display with keypad inputs. It uses full-duplex RS-422 serial communications and has a DZUS rail mount, LED display, and meets various military standards for temperature, vibration, EMI, and more. It operates from 18-32V DC with optional illuminated displays available in red, green, or amber.
2002ISSCC
This document summarizes a dual-band direct conversion transceiver chip for GSM/GPRS applications. The transceiver supports 850MHz, 900MHz, 1800MHz, and 1900MHz bands. It uses a SiGe BiCMOS process and includes integrated low-noise amplifiers, mixers, quadrature dividers, baseband filters, voltage-controlled oscillators, and output buffers. Key performance metrics like gain, noise figure, output power and phase noise are provided. The transceiver chip is part of a complete GSM/GPRS platform solution and is packaged in a 48-pin QFN package.
SWCDO 101: Building a team
The document outlines a 7-step process for building a startup team: 1) map out business objectives, 2) list required positions, 3) hire a team lead first, 4) fill remaining positions, 5) meet with the complete team, 6) re-assess team composition, and 7) design an incentive structure. It emphasizes the importance of clear communication of objectives, evaluating skills and team synergy, and promoting a collaborative culture through team-building.
SWCDO 101: All I Want presentation
The document promotes an app called All I Want that allows users to create wishlists of things they want, share those lists with friends, and never forget important dates. It encourages users to invite friends to download the app and follow them for a chance to win prizes in a StartUp Weekend raffle, with 3 winners selected randomly and 1 for the most followed user.
More Related Content
What's hot
Power factor correction formula
This document provides a formula and example for calculating the capacitance needed for power factor correction of an induction motor. It explains that adding a capacitor in parallel with a single phase motor reduces the current supplied by the grid. This connection decreases power loss in the supply wires and voltage drop, increasing the voltage at the motor terminals. Power factor correction of an induction motor from 0.8 to unity can reduce wire losses by 36%.
Ensilica qam demapper
This document provides information on the QAM Demapper eSi-7580 chip from EnSilica Limited. It can slice signals into BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM and produce up to 10 log likelihood ratio bit metrics per clock cycle with sustained throughput of 1.5G LLRs/sec. It uses a pipelined structure to efficiently map constellation points to QAM grids, calculate squared distances to nearest constellation points, weight by channel state information and output rounded and saturated log likelihood ratios. For an Altera Cyclone III FPGA, a version supporting up to 1024-QAM requires around 1700 logic elements and 2 multipliers.
ODU channel stacker
The document discusses the development of a new digital single-wire multiplexer (DSWM) for satellite reception that can simultaneously receive 14 input channels using less power than current analog multiplexers. The key aspects of the new DSWM design include digital switching and signal processing circuits integrated into a 45nm chip measuring 30.127mm2. The DSWM is capable of simultaneously receiving and processing 12 satellite channels with a power consumption of only 8W, demonstrating an improvement over existing analog multiplexer technology.
The differences about wecon plc series
The document compares four PLC models: LX3V, LX3VP, LX3VE, and LX3VM. LX3VP adds N:N networking and improves pulse output frequency and ladder capacity over LX3V. LX3VE expands on LX3VP with additions like S-type acceleration/deceleration, jitter pulse support, and E-CAM functions. LX3VM is similar to LX3VE but also includes circle interpolation functionality.
SynergieCAD-V93K-CTH-Configuration_MAR16
This document provides a summary of the configuration of an Advantest 93000 CTH system. It includes details on the instrumentation in two card cages, including the types and quantities of DC power supplies and digital pattern generators. The system is configured with 512 PS1600 digital channels, 192 device power supplies, a 4S/4M MB-AV8+ mixed signal card, and 5V utility power. The location of the system is also listed as Synergie-CAD in Munich.
Original NPN Transistor D468 2SD468 468 TO-92 New
This document provides specifications for the 2SD468 NPN silicon transistor from Unisonic Technologies Co., Ltd. It is described as a low frequency power amplifier that can be used to complement the 2SB562 transistor. The document provides maximum ratings, electrical characteristics, and typical performance curves for the transistor, including DC current gain, saturation voltage, and output capacitance as functions of collector current and voltage.
8086
This document contains 15 multiple choice questions related to computer architecture and microprocessors:
1. It asks about the memory capacity addressable by a 32-bit address bus.
2. It asks which processor family is pipelined.
3. It asks which statement about the 8086 microprocessor is not true, regarding coprocessor interfacing and support for pipelining.
4. It asks about a component that ensures only one integrated circuit is active at a time to avoid bus conflicts, with options like control bus, control decoder, and CPU.
Raspberry Pi I/O控制與感測器讀取
Raspberry Pi I/O控制與感測器讀取:
艾鍗教你從實作中認識物聯網！
https://bit.ly/3kLZhAq
課程使用Raspberry Pi結合ARM mbed Cloud來實現一個物聯網解決方案。你會了解M2M(Machine-to-Machine)網路協定,包含CoAP、MQTT、LWM2M等協定，並藉由Raspberry Pi連接 Cloud。 Raspberry Pi的部份教你連接一些感測器，包含GPIO、數位界面I2C的溫溼度感測器、類比感測器如光感應器等，並將這些感測器成為定義為不同的Resource Path並註冊在mbed cloud中。
本課程將採用Node.js撰寫WebAPP，使用HTTP/RESTful API存取Resource。在實作WebAPP中，除了後端Node.js，你也將會看到後端如何與前端瀏覽器之間要如何溝通的方式，如AJAX或WebSocket
Real time power system operationunder deregulated environmnt
The document discusses the evolution of India's power grid system and electricity market. It provides details on:
1) How India's grid system has expanded from local grids at independence to interconnected regional and national grids. The five regional grids are now synchronized.
2) The peculiar characteristics of different regional grids in India such as hydro and load profiles.
3) How grid operation has improved from a scenario of frequent disturbances to the current availability based tariff system.
4) The introduction of real-time pricing mechanisms like availability based tariff, UI charges, and reactive power charges to encourage efficient grid operation.
5) How the electricity market has evolved from an unbundled system to the current framework
Program LCD ARM
This document describes interfacing a 16x2 LCD display with an ARM LPC2148 microcontroller. It includes code to initialize the LCD in 4-bit and 8-bit modes. Function prototypes and subroutines are provided for sending commands and data to the LCD. A circuit diagram shows the LCD connection to the microcontroller pins for displaying characters on the LCD.
Lec05ek
This document discusses transmission line models and parameters. It defines transmission line parameters such as characteristic impedance and explains that lossless transmission lines have resistance and conductance values of zero. It provides the parameter equations for different common transmission line types including coaxial cable, parallel plates, and microstrip lines. It also defines the voltage reflection coefficient and explains how it is used to characterize impedance mismatches and standing waves on transmission lines.
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
This document provides specifications for the FSP2000-A0AGPBI power supply unit. It can provide up to 2000W of power output and supports 16 graphics cards through its PCI-E connectors. The PSU meets 80Plus Platinum efficiency standards and is suitable for cryptocurrency mining and other high-performance computing applications due to its stable power output, modular design, and ability to operate under high temperatures.
Galil blm n23_catalog
The BLM-N23-50-1000-B brushless servo motor is a low cost, high performance motor well suited for OEM applications. It provides 55 oz-in of continuous torque in a Nema 23 frame size package and has a high torque to inertia ratio, making it ideal for applications requiring fast acceleration and point-to-point motion. The motor has a 1000 line differential quadrature encoder and connects directly to several Galil amplifier models.
OLV1 (Load Flow Analysis) in Synch Mod
This document contains a one-line diagram of an electrical distribution system undergoing a load flow analysis. The diagram shows various buses, generators, transformers, cables, loads and their ratings. It also displays the voltage levels and percentages at each bus.
Original PNP Transistor TIP42CF TIP42 6A 100V TO-220 New
This document provides technical specifications for the TIP42CF epitaxial planar PNP transistor, including:
1) Maximum ratings for collector-base voltage, collector-emitter voltage, emitter-base voltage, collector current, base current, collector power dissipation, and junction/storage temperature range.
2) Electrical characteristics such as collector-emitter saturation voltage, base-emitter on voltage, transition frequency, and current gain.
3) Graphs showing safe operating area, saturation voltage, current gain, and collector power dissipation as a function of other variables.
Sspi day out_2014_teledyne-paul_sandoval
This document summarizes Teledyne Paradise Datacom's Q-Net VSAT solution for providing medium to high utilization satellite communication networks. Key features highlighted include software-defined SCPC modems, fiber transceivers, HPAs, antenna systems, and integrated terminal designs. Financial analysis shows the Q-Net solution provides bandwidth savings of up to 3.6 MHz and cost savings of up to $5.1 million over 36 months compared to traditional SCPC and VSAT networks. Advanced network management capabilities are also discussed.
442166
The document provides technical specifications for the MiniSKiiP® SKiiP 24NAB12T4V1 3-phase bridge rectifier, brake chopper, and 3-phase bridge inverter module. It includes absolute maximum ratings, typical characteristics, mechanical data, and graphs of the module's electrical performance characteristics such as output, current rating vs. temperature, turn-on/off energies, switching times, and more. The module is intended for use in converter, inverter, and brake applications.
Schematic amp
This document contains a circuit diagram for an amplifier. It includes a list of components used in the circuit such as transistors, resistors, capacitors and other electrical components. The diagram shows how the components are connected to create the amplifier circuit. Labels on the diagram indicate power sources, inputs, outputs and other connections between the various components that make up the amplifier.
Cockpit Control Unit CCU-500 Data Sheet (Interface Displays)
The CCU-500 is a cockpit control unit that provides a monochrome alphanumeric display with keypad inputs. It uses full-duplex RS-422 serial communications and has a DZUS rail mount, LED display, and meets various military standards for temperature, vibration, EMI, and more. It operates from 18-32V DC with optional illuminated displays available in red, green, or amber.
2002ISSCC
This document summarizes a dual-band direct conversion transceiver chip for GSM/GPRS applications. The transceiver supports 850MHz, 900MHz, 1800MHz, and 1900MHz bands. It uses a SiGe BiCMOS process and includes integrated low-noise amplifiers, mixers, quadrature dividers, baseband filters, voltage-controlled oscillators, and output buffers. Key performance metrics like gain, noise figure, output power and phase noise are provided. The transceiver chip is part of a complete GSM/GPRS platform solution and is packaged in a 48-pin QFN package.
What's hot (20)
Real time power system operationunder deregulated environmnt
Real time power system operationunder deregulated environmnt
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
Strong Power for Cryptocurrency Mining/HPC/GPGPU Systems
Original PNP Transistor TIP42CF TIP42 6A 100V TO-220 New
Original PNP Transistor TIP42CF TIP42 6A 100V TO-220 New
Cockpit Control Unit CCU-500 Data Sheet (Interface Displays)
Cockpit Control Unit CCU-500 Data Sheet (Interface Displays)
Viewers also liked
SWCDO 101: Building a team
The document outlines a 7-step process for building a startup team: 1) map out business objectives, 2) list required positions, 3) hire a team lead first, 4) fill remaining positions, 5) meet with the complete team, 6) re-assess team composition, and 7) design an incentive structure. It emphasizes the importance of clear communication of objectives, evaluating skills and team synergy, and promoting a collaborative culture through team-building.
SWCDO 101: All I Want presentation
The document promotes an app called All I Want that allows users to create wishlists of things they want, share those lists with friends, and never forget important dates. It encourages users to invite friends to download the app and follow them for a chance to win prizes in a StartUp Weekend raffle, with 3 winners selected randomly and 1 for the most followed user.
SWCDO 101: Project management
This document provides tips for managing a startup project during a 54-hour Startup Weekend event. It recommends:
1) Brainstorming all ideas early and prioritizing based on validations and feasibility within time constraints.
2) Using tools like Scrum boards and assigning roles/tasks to allocate work and set deadlines.
3) Focusing on validating customer need, building an MVP prototype, and creating a business model as these will be key judging criteria.
Gaurav Sharma (ESL Trainer)
This resume is for Gaurav Sharma, who has over 9 years of experience in IT and education. He has 3 years of experience in HR recruitment for IT and 5 years of experience as an English as a Second Language trainer. He has a Bachelor's degree in Information Technology and is pursuing a Master's degree in English. His professional experiences include freelance English language training and working as an HR trainer and recruiter for IT companies serving US clients.
Elaboracion de Presentacion del "CNB"
El documento describe los componentes fundamentales del Currículo Nacional Base de Guatemala (CNB). Explica que el CNB concibe la educación como un proyecto para el desarrollo integral de los estudiantes y la nación. También describe que el currículo debe promover la convivencia armónica y valorar la identidad cultural. Finalmente, explica que el currículo busca formar estudiantes conscientes de su realidad que sean responsables y comprometidos con el desarrollo social.
Feminist post
FPDA (Feminist Post-Structuralist Discourse Analysis) is introduced as a new theoretical and methodological approach to studying gender and language. The document outlines the core tenets of FPDA, explaining how it differs from other approaches like CDA (Critical Discourse Analysis) in its anti-materialist stance and lack of emancipatory agenda. Examples are given of how FPDA has been applied to analyze classroom interactions and gendered leadership in organizational settings.
SWCDO 101: The Business Model Canvas
This document outlines an agenda for a workshop on the Business Model Canvas. The agenda includes an introduction to the Business Model Canvas tool, examples of completed canvases, a group workshop where attendees will create a canvas for an enterprise project using sticky notes, and presentations and discussion of the completed canvases. The document provides background on the Business Model Canvas, describing it as a tool to create and analyze business models. It also explains the nine building blocks that make up the canvas relating to key partners, activities, resources, value propositions, customer relationships, channels, customer segments, revenue streams, and cost structure.
Ruta pie de monte llanero
en la ruta pie de monte llanero, puedes disfrutar de varios lugares turísticos como ocarros, centro agroecologico la cosmopolitana, las termales y probar la gastronomia como el pande arroz y los asaderos tipicos de carne llanera,
SWCDO 101: Pitching your startup idea
A pitch is a verbal presentation of a business plan used to present startup ideas to prospective investors. There are two main types: an elevator pitch, which is a 30-60 second summary to get a second meeting, and a final pitch, which is a 3-5 minute presentation. An effective pitch includes: (1) outlining the problem being solved, (2) proposing the venture or solution, and (3) what is being requested from the investor. A final pitch also details: how the solution works, validations, business model, market opportunity, and financial projections to convince the audience. Presentations should use visual aids and focus on engaging the idea, not the presenter.
SWCDO 101: Revenue models
This document discusses business and revenue models for new companies and ideas. It suggests using a business model canvas to match an idea with the right business and revenue structures. Some common revenue models mentioned include selling a minimum viable product online, using a freemium or subscription model, one-time purchases, ads, microtransactions, app stores, and installation/support/licensing fees. The document encourages entrepreneurs to consider their revenue model as part of the initial business planning process.
Viewers also liked (16)
Similar to gps v
Datacomm 100G QSFP28 CLR4 Optical Transceivers
The document describes a 100Gb/s QSFP28 optical transceiver module that uses 4 independent full-duplex channels operating at up to 28Gb/s per channel. It has a QSFP28 form factor and interface and uses CWDM technology to transmit 4 wavelengths over a single fiber with up to 2km of reach. The module operates from a single 3.3V power supply and includes digital diagnostics and monitoring interfaces.
Max6972 max6973
The MAX6972/MAX6973 are 16-output PWM LED drivers that can drive red, green, and blue LEDs for full-color displays. Each of the 16 outputs has individual intensity control and fault detection. The drivers operate from 3.0-3.6V and can drive LEDs from 3-7V. They interface using differential signaling and include a watchdog timer to clear the display if the interface fails. Evaluation kits are available for the MAX6972/MAX6973 in -40°C to +125°C temperature ranges.
Shenzhen Hifibercom Technology Co.,Ltd QSFP28 SR4 optical module
This document provides specifications for a 100Gb/s QSFP28 SR4 optical transceiver module. It has 4 independent channels with a maximum data rate of 28Gb/s per channel and 100m transmission over OM4 multi-mode fiber. Key features include low power consumption of 2.5W, operating temperature range of 0-70°C, and digital diagnostic monitoring via a 2-wire interface. Application areas include data center rack-to-rack connections and 100GbE.
underground cable fault location using aruino,gsm&gps
This document describes a project to locate underground cable faults using an Arduino, GSM, and GPS. The system applies a low DC voltage to the cable and measures the voltage drop to determine the location of any faults. When a fault is detected, an SMS message is sent with the GPS coordinates. Key components include an Arduino microcontroller, LCD display, GSM and GPS modules, resistors to represent cable lengths, and relays. The software is written in C/C++ and uploaded to the Arduino. The system provides low-cost fault detection for underground cables over long distances.
Sms based notice board with 3 lcd
The system allows notices to be displayed on three LCD screens by sending an SMS to the GSM modem, which is connected to an microcontroller. The microcontroller then displays the SMS text on the LCD screens. It aims to provide a paperless solution for displaying notices in places like colleges, institutes, offices, etc. The document outlines the system's block diagram, components, power supply, microcontroller section, and applications. It concludes that the SMS-based electronic notice board overcomes issues with traditional paper-based boards.
prepaid energy meter using smartcard
This document describes a smart card prepaid energy meter system using GSM. The system includes an ARM microcontroller that takes readings from an energy meter and displays it on an LCD. It also sends the reading to the user's phone via text message through a GSM modem. The hardware requirements include components like the microcontroller, GSM modem, LCD, LEDs, resistors, capacitors, transformer, regulator, relay, energy meter and lamp. The software used is the KEIL compiler and embedded C. It allows reducing manual efforts to read energy meters and provides a cost effective solution with reduced manpower.
5 FINAL PROJECT REPORT
This document describes a pulse counter circuit using an AT89C4051 microcontroller. It includes a circuit schematic and descriptions of the major components used, including the AT89C4051 microcontroller, MAX232 RS-232 driver, 7805 voltage regulator, LCD display, 11.0592MHz crystal, and other passive components. The circuit uses the microcontroller to count input pulses and display the count on the LCD. Hardware and functionality of the components are explained in detail.
automatic water level controlling using gsm system
This document provides information about a water level controller project using a GSM module. It senses the water level using sensors connected to a microcontroller. If the level is low/high, the microcontroller signals the motor to turn on/off via a motor driver. Simultaneously, the GSM module sends a message to the user about the motor status and water level. The hardware components include an AT89S52 microcontroller, LCD, motor, sensors, GSM modem, and power supply. It is designed to reduce water and power wastage by automating the motor control.
Steper Motor Control Through Wireless
This document summarizes a student project to control a stepper motor through wireless transmission. The project uses a microcontroller to send step pulses to a driver circuit connected to a stepper motor. Commands can be sent from a computer serial port or wireless interface to control the motor speed displayed on an LCD screen. The system aims to provide precise digital control of the stepper motor position through simple wireless operation.
Gsm message display
This document describes a GSM based notice board project that uses an AT89S52 microcontroller to receive SMS messages from a user's mobile phone via a GSM modem. The messages are then displayed on a 16x2 LCD display. The GSM modem is initialized and checks for connectivity. When a user sends an SMS, its contents are displayed on the LCD screen using the microcontroller and MAX232 interface, which converts logic levels. The hardware components, specifications, pin descriptions, block diagram, software tools, and advantages are also summarized.
CAN_controller_integrated_transceiver_microchip_MCP25625.pdf
The MCP25625 is an integrated CAN controller and transceiver that allows microcontrollers to communicate over a CAN bus. It operates up to 1Mb/s and integrates both a low-power CAN transceiver and a CAN controller that implements the CAN 2.0B protocol. The device supports various modes like normal operating mode, sleep mode to reduce power consumption, and listen-only mode for bus monitoring. It interfaces to microcontrollers via SPI and has integrated acceptance filters and masking to filter CAN messages.
Shenzhen Hifibercom Technology Co.,Ltd Qsfp28 CWDM4 optical module
This product is a transceiver module designed for 2km optical communication applications. The design is compliant to 1000GBASE CWDM4 MSA standard. The module converts 4 inputs channels (ch) of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 100Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Smart LED Notice Board
This document describes an SMS-based wireless notice board project using a microcontroller and GSM modem. The system allows notices to be displayed on an LED matrix board remotely via SMS messages sent to the GSM modem. The microcontroller receives SMS texts with the GSM modem and MAX232 interface and displays the messages on the LED board. The project uses components like a 89S52 microcontroller, SIM300 GSM modem, 74138 and 74154 decoder ICs, and a 24C02 EEPROM for message storage.
Gps vehicle theft identification and tracking and control
This document describes a microcontroller-based GPS and GSM tracking system. It includes a block diagram showing the main components: a microcontroller, GPS modem, GSM modem, LCD display, sensor, ADC and power supply. It provides details on the 8051 microcontroller, MEMS sensors, and the importance of GPS and GSM networks for location tracking. It also lists advantages like security, remote access and applications in vehicles, ships and tracking systems.
Speed control of motor
This document describes a project to control the speed of an AC induction motor using a microcontroller and TRIAC. A microcontroller sends commands to a cyclo-converter which controls the frequency of the AC power supplied to the motor, thereby controlling its speed. The microcontroller activates an optocoupler connected to a TRIAC, which allows AC power to flow to the motor and rotate it when triggered. Keypad inputs are used to control the microcontroller and select different motor speeds.
Wireless Gesture Controlled Tank Toy- Transmitter
This PPT describes the construction, working and applications of Wireless gesture controlled Tank Toy (using ZigBee).
QSFP28-100G-CWDM4-T02#111006.pdf
This document describes a 100G 1270nm to 1330nm 2km QSFP28 transceiver module. It includes specifications for the optical and electrical characteristics, as well as pin descriptions. Key features of the module include duplex LC receptacle optical interface, 4x25G electrical interface, transmitters using cooled 4x25Gb/s CWDM lasers, and receivers using 4x25Gb/s PIN photodetectors. It is compliant with standards including IEEE 802.3bm, QSFP28 MSA, and CWDM4 MSA.
QSFP28-100G-CWDM4-T02#111006.pdf
This document provides specifications for a 100G 1270nm to 1330nm 2km QSFP28 transceiver module. It includes:
- Descriptions of the product, features including 4x25G electrical interface and CWDM transmitters and receivers.
- Pin descriptions and diagrams of the transceiver module.
- Extensive tables listing the electrical, optical and thermal characteristics and specifications for both the transmitters and receivers.
- Notes on the module interface pins and electrical signaling.
qsfp28-100g-cwdm4-2km-optical-transceiver-111006.pdf
This document describes a 100G 1270nm to 1330nm 2km QSFP28 transceiver module. It provides specifications for the optical and electrical characteristics, including transmit and receive optical wavelengths between 1264.5-1337.5nm, data rates of 25.78125 Gbps per lane, and sensitivity down to -10dBm. It also lists features such as a duplex LC connector interface, hot-pluggable QSFP28 form factor, and low power consumption of up to 3.5W. Pinouts and descriptions are provided for the 38-pin electrical interface.
Automatic car parking system by Himanshu
This document describes an automatic car parking system project that uses infrared sensors to detect vehicles entering and exiting the parking lot. It then displays the number of vehicles currently in the lot. The system uses a microcontroller, LCD display, infrared transmitters and receivers, stepper motor, and other components. It provides automatic opening and closing of the entry gate and constant display of vehicle count. The document outlines the system blocks, components, power supply, microcontroller details, display unit, sensors, stepper motor, applications, and conclusion.
Similar to gps v (20)
Shenzhen Hifibercom Technology Co.,Ltd QSFP28 SR4 optical module
Shenzhen Hifibercom Technology Co.,Ltd QSFP28 SR4 optical module
underground cable fault location using aruino,gsm&gps
underground cable fault location using aruino,gsm&gps
automatic water level controlling using gsm system
automatic water level controlling using gsm system
CAN_controller_integrated_transceiver_microchip_MCP25625.pdf
CAN_controller_integrated_transceiver_microchip_MCP25625.pdf
Shenzhen Hifibercom Technology Co.,Ltd Qsfp28 CWDM4 optical module
Shenzhen Hifibercom Technology Co.,Ltd Qsfp28 CWDM4 optical module
Gps vehicle theft identification and tracking and control
Gps vehicle theft identification and tracking and control
qsfp28-100g-cwdm4-2km-optical-transceiver-111006.pdf
qsfp28-100g-cwdm4-2km-optical-transceiver-111006.pdf
Recently uploaded
一比一原版(UMN文凭证书)明尼苏达大学毕业证如何办理
毕业原版【微信:176555708】【(UMN毕业证书)明尼苏达大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UO毕业证)渥太华大学毕业证如何办理
UO毕业证录取书【微信95270640】购买（渥太华大学毕业证成绩单硕士学历）Q微信95270640代办UO学历认证留信网伪造渥太华大学学位证书精仿渥太华大学本科/硕士文凭证书补办渥太华大学 diplomaoffer,Transcript购买渥太华大学毕业证成绩单购买UO假毕业证学位证书购买伪造渥太华大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：渥太华大学渥太华大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲说起这事时父亲很吃惊抚摸着山娃的头说还好醒得及时要不家早被人掏空了到时连电视也没得看啰不过父亲还是夸山娃能临危不乱随机应变有胆有谋山娃笑笑说那都是书上学的看童话和小说时多
一比一原版(Harvard毕业证书)哈佛大学毕业证如何办理
毕业原版【微信:41543339】【(Harvard毕业证书)哈佛大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
End-to-end pipeline agility - Berlin Buzzwords 2024
We describe how we achieve high change agility in data engineering by eliminating the fear of breaking downstream data pipelines through end-to-end pipeline testing, and by using schema metaprogramming to safely eliminate boilerplate involved in changes that affect whole pipelines.
A quick poll on agility in changing pipelines from end to end indicated a huge span in capabilities. For the question "How long time does it take for all downstream pipelines to be adapted to an upstream change," the median response was 6 months, but some respondents could do it in less than a day. When quantitative data engineering differences between the best and worst are measured, the span is often 100x-1000x, sometimes even more.
A long time ago, we suffered at Spotify from fear of changing pipelines due to not knowing what the impact might be downstream. We made plans for a technical solution to test pipelines end-to-end to mitigate that fear, but the effort failed for cultural reasons. We eventually solved this challenge, but in a different context. In this presentation we will describe how we test full pipelines effectively by manipulating workflow orchestration, which enables us to make changes in pipelines without fear of breaking downstream.
Making schema changes that affect many jobs also involves a lot of toil and boilerplate. Using schema-on-read mitigates some of it, but has drawbacks since it makes it more difficult to detect errors early. We will describe how we have rejected this tradeoff by applying schema metaprogramming, eliminating boilerplate but keeping the protection of static typing, thereby further improving agility to quickly modify data pipelines without fear.
Global Situational Awareness of A.I. and where its headed
You can see the future first in San Francisco.
Over the past year, the talk of the town has shifted from $10 billion compute clusters to $100 billion clusters to trillion-dollar clusters. Every six months another zero is added to the boardroom plans. Behind the scenes, there’s a fierce scramble to secure every power contract still available for the rest of the decade, every voltage transformer that can possibly be procured. American big business is gearing up to pour trillions of dollars into a long-unseen mobilization of American industrial might. By the end of the decade, American electricity production will have grown tens of percent; from the shale fields of Pennsylvania to the solar farms of Nevada, hundreds of millions of GPUs will hum.
The AGI race has begun. We are building machines that can think and reason. By 2025/26, these machines will outpace college graduates. By the end of the decade, they will be smarter than you or I; we will have superintelligence, in the true sense of the word. Along the way, national security forces not seen in half a century will be un-leashed, and before long, The Project will be on. If we’re lucky, we’ll be in an all-out race with the CCP; if we’re unlucky, an all-out war.
Everyone is now talking about AI, but few have the faintest glimmer of what is about to hit them. Nvidia analysts still think 2024 might be close to the peak. Mainstream pundits are stuck on the wilful blindness of “it’s just predicting the next word”. They see only hype and business-as-usual; at most they entertain another internet-scale technological change.
Before long, the world will wake up. But right now, there are perhaps a few hundred people, most of them in San Francisco and the AI labs, that have situational awareness. Through whatever peculiar forces of fate, I have found myself amongst them. A few years ago, these people were derided as crazy—but they trusted the trendlines, which allowed them to correctly predict the AI advances of the past few years. Whether these people are also right about the next few years remains to be seen. But these are very smart people—the smartest people I have ever met—and they are the ones building this technology. Perhaps they will be an odd footnote in history, or perhaps they will go down in history like Szilard and Oppenheimer and Teller. If they are seeing the future even close to correctly, we are in for a wild ride.
Let me tell you what we see.
一比一原版(UCSB文凭证书)圣芭芭拉分校毕业证如何办理
毕业原版【微信:176555708】【(UCSB毕业证书)圣芭芭拉分校毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Experts live - Improving user adoption with AI
Bekijk de slides van onze sessie Enhancing Modern Workplace Efficiency op Experts Live 2024.
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
State of Artificial intelligence Report 2023
Artificial intelligence (AI) is a multidisciplinary field of science and engineering whose goal is to create intelligent machines.
We believe that AI will be a force multiplier on technological progress in our increasingly digital, data-driven world. This is because everything around us today, ranging from culture to consumer products, is a product of intelligence.
The State of AI Report is now in its sixth year. Consider this report as a compilation of the most interesting things we’ve seen with a goal of triggering an informed conversation about the state of AI and its implication for the future.
We consider the following key dimensions in our report:
Research: Technology breakthroughs and their capabilities.
Industry: Areas of commercial application for AI and its business impact.
Politics: Regulation of AI, its economic implications and the evolving geopolitics of AI.
Safety: Identifying and mitigating catastrophic risks that highly-capable future AI systems could pose to us.
Predictions: What we believe will happen in the next 12 months and a 2022 performance review to keep us honest.
ViewShift: Hassle-free Dynamic Policy Enforcement for Every Data Lake
Dynamic policy enforcement is becoming an increasingly important topic in today’s world where data privacy and compliance is a top priority for companies, individuals, and regulators alike. In these slides, we discuss how LinkedIn implements a powerful dynamic policy enforcement engine, called ViewShift, and integrates it within its data lake. We show the query engine architecture and how catalog implementations can automatically route table resolutions to compliance-enforcing SQL views. Such views have a set of very interesting properties: (1) They are auto-generated from declarative data annotations. (2) They respect user-level consent and preferences (3) They are context-aware, encoding a different set of transformations for different use cases (4) They are portable; while the SQL logic is only implemented in one SQL dialect, it is accessible in all engines.
#SQL #Views #Privacy #Compliance #DataLake
一比一原版(牛布毕业证书)牛津布鲁克斯大学毕业证如何办理
毕业原版【微信:41543339】【(牛布毕业证书)牛津布鲁克斯大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
My burning issue is homelessness K.C.M.O.
My burning issue is homelessness in Kansas City, MO
To: Tom Tresser
From: Roger Warren
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Data and AI
Round table discussion of vector databases, unstructured data, ai, big data, real-time, robots and Milvus.
A lively discussion with NJ Gen AI Meetup Lead, Prasad and Procure.FYI's Co-Found
DSSML24_tspann_CodelessGenerativeAIPipelines
Codeless Generative AI Pipelines
(GenAI with Milvus)
https://ml.dssconf.pl/user.html#!/lecture/DSSML24-041a/rate
Discover the potential of real-time streaming in the context of GenAI as we delve into the intricacies of Apache NiFi and its capabilities. Learn how this tool can significantly simplify the data engineering workflow for GenAI applications, allowing you to focus on the creative aspects rather than the technical complexities. I will guide you through practical examples and use cases, showing the impact of automation on prompt building. From data ingestion to transformation and delivery, witness how Apache NiFi streamlines the entire pipeline, ensuring a smooth and hassle-free experience.
Timothy Spann
https://www.youtube.com/@FLaNK-Stack
https://medium.com/@tspann
https://www.datainmotion.dev/
milvus, unstructured data, vector database, zilliz, cloud, vectors, python, deep learning, generative ai, genai, nifi, kafka, flink, streaming, iot, edge
Analysis insight about a Flyball dog competition team's performance
Insight of my analysis about a Flyball dog competition team's last year performance. Find more: https://github.com/rolandnagy-ds/flyball_race_analysis/tree/main
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办(uts毕业证书)悉尼科技大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【(uts毕业证书)悉尼科技大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Influence of Marketing Strategy and Market Competition on Business Plan
Influence of Marketing Strategy and Market Competition on Business Plan
End-to-end pipeline agility - Berlin Buzzwords 2024
End-to-end pipeline agility - Berlin Buzzwords 2024
Global Situational Awareness of A.I. and where its headed
Global Situational Awareness of A.I. and where its headed
A presentation that explain the Power BI Licensing
A presentation that explain the Power BI Licensing
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
ViewShift: Hassle-free Dynamic Policy Enforcement for Every Data Lake
ViewShift: Hassle-free Dynamic Policy Enforcement for Every Data Lake
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
Analysis insight about a Flyball dog competition team's performance
Analysis insight about a Flyball dog competition team's performance
gps v
- 1. REAL TIME VEHICLE TRACKING SYSTEM Using GPS and GSM
- 2. 230 to 12 V Step Down Transformer AT89S52 µc MAX232 GSM Modem GPS Modem 16x2 LCD Display Relay Block Diagram:
- 3. Power Supply
- 4. Transformer(12-0-12)V : i) Step down ii) 0-9V with 500mA Rectifier: => Bridge Rectifier => Bidirectional to unidirectional
- 5. Voltage Regulator: 7805 for 5V constant DC Filter: => Capacitor of 1000µF and 25/50V
- 7. Features: o Compatibility with the MCS 51 family o 8-bit CPU frequency up to 33MHz; o RAM: 256 Bytes o Flash memory: 8K Bytes o 3 timers / counters of 16 bits; o Two data pointers o 1 serial port (full duplex UART) o supports up to 10 000 rewrites o contains the oscillator; o Short programming time.
- 8. GPS and GSM
- 9. GPS
- 10. To Find location by using Latitude and Longitude data Why we use GPS ? Features of GPS: 24 Satellites at different orbits Revolve around Earth twice a day For a 2D location, 3 GPS Satellites are used For a 3D location, more than 3 Satellites are used
- 11. How it Works ? Triangulation Augmentation
- 12. A GPS Signal contains three different bits of information (1).Pseudo random code (2).Ephemeris data (3).Almanac data THE SIGNAL
- 13. BASIC CONCEPTS OF GPS Receivers require clear line-of-sight; thus, they will not work indoors or where tall objects obscure the sky
- 14. GSM
- 18. IC MAX232: • MAX232 IC is used to convert the TTL/CMOS logic levels to RS232 logic levels during serial communication of microcontrollers with PC • The controller operates at TTL logic level (0-5V) • whereas the serial communication in PC works on RS232 standards (-25 V to + 25V)
- 20. APPLICATIONS: Stolen vehicle recovery . Field service management. It is used for food delivery and car rental companies. ADVANTAGES: It provides more security than other system. From the remote place we can access the system.
- 21. Thank You