The document provides instructions for installing Zimbra on a BlankOn 6 Ombilin system. It describes downloading and extracting the Zimbra package, configuring DNS and Bind using Webmin, installing dependencies, and running the Zimbra installation script to complete the setup. Key steps include setting up the network, editing host and resolver files, installing Webmin for DNS management, creating DNS records for the domain, and extracting and running the Zimbra installation package.
The document provides instructions for configuring a DNS server on a Linux system using BIND. It involves installing BIND, editing configuration files such as named.conf and named.rfc1912.zones to define the domain zone and name server, copying and editing the zone file, changing permissions on the zone file, modifying named.caching-namedserver.conf, and restarting the named service. Finally, nslookup is used to test the name resolution.
Membangun web server,_e-mail_server_dan_ftp_serverIwan Kurniarasa
This document provides instructions for installing Linux RHEL 4 to build a web server, email server, and FTP server on a local network. It describes preparing the installation media and hardware, running the installation wizard to partition disks and set up users, and configuring the installed system to enable DNS, web, email, and FTP services. Key steps include installing required packages, configuring files like named.conf, httpd.conf, and main.cf, and testing the installed services.
This document provides instructions for configuring a Debian server to function as a network server with various services. It includes steps for setting the IP address and network interfaces, installing and configuring DHCP, SSH, web, DNS, FTP, proxy, and email servers. It also describes configuring iptables rules to enable network address translation and port forwarding for client devices to access the Internet and server services through the Debian server.
This document discusses the Puppet configuration management tool. It provides an overview of Puppet including its open source nature, supported platforms, file structure, and types of resources it can manage like files, packages, services. It also discusses Facter for collecting system facts. Several examples are shown of how to configure files, packages, services. Finally Amazon EC2 is mentioned as a way to deploy Puppet in a scalable environment.
This document provides summaries of 10 common Linux commands:
1) grep - Search files using patterns
2) find - Search for files in a directory hierarchy
3) ln - Make links between files
4) history - Print recently used commands
5) ls - List directory contents
6) auto-apt run - Install packages needed by commands
7) dpkg - Install Debian packages
8) wc - Count lines, words, and characters in files
9) top - Show running processes dynamically
10) man - Show manual pages for commands
PENYELESAIAN SOAL UKK/UPK TAHUN 2018 Paket 3 oleh Walid UmarWalid Umar
The document describes steps to configure a server to provide network services including DHCP, DNS, FTP, Samba file sharing, Apache web server, MySQL, mail server, and SquirrelMail webmail. Key services configured are Bind DNS, ProFTPD FTP, Samba file sharing, Apache web server, Postfix mail server, and SquirrelMail webmail. Network interfaces are configured and services are enabled, configured and tested.
Configuration of Smtp Server On CentOS 8Kaan Aslandağ
This document provides instructions for configuring an SMTP server on CentOS 8, including installing Postfix and Dovecot, configuring configuration files like main.cf, master.cf, and firewall rules to allow access to ports 25, 465, and 587 for SMTP, SSL, and submission protocols. Key steps are installing Postfix and Dovecot packages, enabling and starting services, editing configuration files to set mail locations and UIDL formats, and opening required ports in the firewall.
The document provides instructions for configuring a DNS server on a Linux system using BIND. It involves installing BIND, editing configuration files such as named.conf and named.rfc1912.zones to define the domain zone and name server, copying and editing the zone file, changing permissions on the zone file, modifying named.caching-namedserver.conf, and restarting the named service. Finally, nslookup is used to test the name resolution.
Membangun web server,_e-mail_server_dan_ftp_serverIwan Kurniarasa
This document provides instructions for installing Linux RHEL 4 to build a web server, email server, and FTP server on a local network. It describes preparing the installation media and hardware, running the installation wizard to partition disks and set up users, and configuring the installed system to enable DNS, web, email, and FTP services. Key steps include installing required packages, configuring files like named.conf, httpd.conf, and main.cf, and testing the installed services.
This document provides instructions for configuring a Debian server to function as a network server with various services. It includes steps for setting the IP address and network interfaces, installing and configuring DHCP, SSH, web, DNS, FTP, proxy, and email servers. It also describes configuring iptables rules to enable network address translation and port forwarding for client devices to access the Internet and server services through the Debian server.
This document discusses the Puppet configuration management tool. It provides an overview of Puppet including its open source nature, supported platforms, file structure, and types of resources it can manage like files, packages, services. It also discusses Facter for collecting system facts. Several examples are shown of how to configure files, packages, services. Finally Amazon EC2 is mentioned as a way to deploy Puppet in a scalable environment.
This document provides summaries of 10 common Linux commands:
1) grep - Search files using patterns
2) find - Search for files in a directory hierarchy
3) ln - Make links between files
4) history - Print recently used commands
5) ls - List directory contents
6) auto-apt run - Install packages needed by commands
7) dpkg - Install Debian packages
8) wc - Count lines, words, and characters in files
9) top - Show running processes dynamically
10) man - Show manual pages for commands
PENYELESAIAN SOAL UKK/UPK TAHUN 2018 Paket 3 oleh Walid UmarWalid Umar
The document describes steps to configure a server to provide network services including DHCP, DNS, FTP, Samba file sharing, Apache web server, MySQL, mail server, and SquirrelMail webmail. Key services configured are Bind DNS, ProFTPD FTP, Samba file sharing, Apache web server, Postfix mail server, and SquirrelMail webmail. Network interfaces are configured and services are enabled, configured and tested.
Configuration of Smtp Server On CentOS 8Kaan Aslandağ
This document provides instructions for configuring an SMTP server on CentOS 8, including installing Postfix and Dovecot, configuring configuration files like main.cf, master.cf, and firewall rules to allow access to ports 25, 465, and 587 for SMTP, SSL, and submission protocols. Key steps are installing Postfix and Dovecot packages, enabling and starting services, editing configuration files to set mail locations and UIDL formats, and opening required ports in the firewall.
HAProxy is a free, open-source load balancer and proxy server. It is fast, reliable, and widely used. Some common uses of HAProxy include load balancing HTTP traffic, using access control lists to route requests, handling HTTPS traffic, load balancing MySQL databases, and proxying SSH connections. The latest version of HAProxy introduced new features like connection tracking, limiting connections per IP address, and peer synchronization between HAProxy instances. HAProxy provides high performance, flexibility, and scalability for traffic routing and distribution.
The document discusses configuring Ubuntu to use DNS caching to improve performance. It explains that DNS maps domain names to IP addresses. It then describes installing and configuring the Bind9 DNS server on Ubuntu to use the local loopback IP address of 127.0.0.1 for caching. Tests were run using the dig command to query domain names and IP addresses, showing query times improved after configuring DNS caching. The conclusion states that DNS caching can improve browsing speed and network performance by reducing latency and bottlenecks from repetitive DNS queries.
This document provides an overview of basic Linux commands for tasks like file management, installation, networking, compression, searching, SSH, permissions and more. It explains commands for changing directories, listing files, copying/moving files, installing packages, pinging hosts, compressing files and directories, searching for patterns, remote login via SSH, and managing processes and system information.
Configuration of SFTP Server on CentOS 8.pdfKaan Aslandağ
This document provides instructions for configuring an SFTP server on CentOS 8. It describes installing vsftpd using DNF, backing up and editing the vsftpd configuration file, configuring allowed users in the user_list file, enabling chroot jailing for security, generating a TLS certificate for encrypted connections, configuring the vsftpd service to use the certificate, opening firewall ports for FTP/SFTP, and adding a test SFTP user.
Hebrew Windows Cluster 2012 in a one slide diagramG M
a small ppt explain in hebrew how the wondows cluster works in one slide - i made it for forums.tapuz.co.il/it and share here for everyone usage - enjoy.
מצגת בשקופית אחת בעברית על איך עובד הקלאסטר של ווינדוס בשרטוט פשוט ומובן
This document provides instructions for configuring a basic NFS server on a Red Hat Enterprise Linux 7 system to share directories with a client system. It describes installing NFS and related packages, exporting directories like /opt/nfs, configuring the firewall and starting the NFS daemon on the server. It also covers installing NFS packages, mounting exported directories and testing access on the client. The document further discusses making the NFS shares persist after reboots by configuring fstab files on both systems. It concludes by sharing a home directory through NFS and confirming access.
linux-commandline-magic-Joomla-World-Conference-2014Peter Martin
The Linux command line is a powerful tool. The majority of webservers run on Linux/Unix. Some hosting companies offer SSH access to their hosting environment. Via SSH you can login and use the Linux command line.
In this presentation, Peter will show you some time-saving command line commands that you can use for certain tasks on your Joomla websites:
some basic SSH command line commands
Analyzing & recovering a hacked website
Backup a website or move it to another server
Finding unused files
Setting up a test environment
This document describes migrating a database from a standalone MySQL configuration to a Galera cluster for high availability and redundancy. It outlines the existing infrastructure including web, mail, and database servers managed by Puppet. It then details removing the existing MySQL data and joining the nodes to the new Galera cluster. Configuration files are shown for Galera settings like the state snapshot transfer method and slave threads. System information is displayed for one of the Galera nodes including the large production database size and high query throughput. The GitHub link shows example Puppet code to check the Galera cluster status and return errors if not in the primary or connected states.
The document summarizes steps taken in an iptables lab to configure firewall rules allowing specific traffic. It shows how to allow SSH from 10.30.30.254 to 10.30.30.5, then add rules for DNS, HTTP and HTTPS. One rule is deleted without saving, so it will not persist after a restart. Testing connection attempts confirm the active rules.
This document provides steps to install Odoo 13 on Ubuntu 19.04. It involves updating the system, creating an odoo user, installing PostgreSQL as the database server, installing Python dependencies, Odoo web dependencies, downloading and installing Odoo 13, configuring the odoo-server.conf file, creating log files, setting up the service, and testing. It also provides steps to install wkhtmltopdf for PDF printing support.
This document provides instructions for enabling the EPEL (Extra Packages for Enterprise Linux) repository on RHEL (Red Hat Enterprise Linux) systems to gain access to additional packages. It describes downloading the EPEL rpm package, installing it to enable the repository, and checking that it is functioning properly by viewing available packages and installing a library from EPEL.
Configuration of BIND DNS Server On CentOS 8Kaan Aslandağ
This document provides instructions for configuring a BIND DNS server on CentOS 8. It involves installing the BIND packages, enabling the named service to start at reboot, editing the configuration files to listen on all interfaces and define the forward and reverse DNS zones. The forward zone maps hostnames to IP addresses, while the reverse zone maps IP addresses to hostnames. The zone files are then created and validated before restarting the named service.
This document introduces MongoDB, a NoSQL database that stores data in flexible, JSON-like documents rather than rigid tables. It notes that MongoDB is scalable, supports many programming languages, is free to use, and easy to install. The document provides instructions on installing MongoDB and the PHP driver and includes examples of basic usage from the terminal.
Mise en place d'un client VPN l2tp IPsec sous dockerNicolas Trauwaen
This document describes how to set up a L2TP/IPsec VPN client within a Docker container. It provides details on:
1) The motivation for putting the VPN client in a container, including easier deployment and configuration.
2) The components used - including Ubuntu, StrongSwan for IPsec, and Xl2tpd for L2TP.
3) The steps to build a Docker image with these components and configure it using environment variables to connect to a VPN server.
4) How to run the Docker container, check the VPN connection status, and next steps to improve the image size and routing.
The document describes steps to set up a test environment using Vagrant and Ansible:
1. Clone Vagrantfile and Ansible role repositories for nginx configuration
2. Create vagrant.yaml file to define VM ports and site.yaml playbook to configure nginx
3. Run vagrant up to provision VM, vagrant provision to run Ansible, and ansible-playbook to run the playbook
4. Connect to the VM via vagrant ssh and use the private key to ssh
5. Destroy the test environment with vagrant destroy
This presentation summarizes how to configure various Linux server applications including a YUM server, SSH server, FTP server, and more. It provides step-by-step instructions on setting up each service, including installing required packages, editing configuration files, starting and enabling services, and testing connectivity. The document contains details on configuring a YUM server to install packages from a DVD repository, setting up an SSH server for remote login, setting up an FTP server with VSFTPD, and testing access via FTP clients.
This document provides instructions for setting up a MongoDB replica set across multiple virtual machines. It describes installing MongoDB on each VM, creating directories to store data, configuring the yum repository, and installing MongoDB packages. It then explains how to initialize and configure a local 3-node replica set, add members, and check the replica set status. Finally, it briefly discusses connecting to primary and secondary members, performing CRUD operations, and setting up MongoDB Management Service (MMS) for monitoring and backups.
This document describes how to set up a bastion server or "moat" to provide a secure single point of entry to application servers. It involves installing necessary packages on the bastion server like SSH, updating packages, changing the SSH port, disabling password logins, setting up firewall rules to only allow SSH from the bastion server, creating a special user group and keymaster user for access, and configuring SSH proxying through the bastion to access other servers securely.
This document provides a cheat sheet on how to configure the Nginx web server for common use cases such as setting ports and domain names, serving static files, redirects, reverse proxying, TLS/SSL encryption, load balancing, and access logging. It includes configuration examples for listening on ports, setting server names, serving static assets, 301 and 302 redirects, basic and upgraded reverse proxying, HTTPS setup, and load balancing multiple servers.
GNOME is a desktop environment for Linux distributions that is developed by the GNOME Project. It is written in programming languages like C, C++, Vala, Python and JavaScript. GNOME is used by many popular Linux distributions as their default desktop environment and has over 40 language translations. It also has an active community developing applications and projects using a GPL license. The GNOME Asia Summit is an annual conference about GNOME in Asia that was held in Depok, Indonesia in 2015.
Bringing Indonesia Scripts and Local Language to GNOMEprinceofgiri
Bringing Indonesian scripts and local languages to GNOME
This document discusses efforts to promote Indonesian local languages and scripts within the GNOME desktop environment. It provides background on Indonesia's geographic diversity and over 700 local languages. The author works on the BlankOn Linux distribution, which uses the Manokwari desktop shell for GNOME. Challenges include Indonesia's geography, limited knowledge and use of local languages, and lack of upstream contributions. Results so far include integrating the Banyumas, Aceh, Bali, Batak Toba, Buginese, Jawa, Rejang and Sundanese languages and scripts. More work is needed to encourage contributions and cooperate with other organizations.
HAProxy is a free, open-source load balancer and proxy server. It is fast, reliable, and widely used. Some common uses of HAProxy include load balancing HTTP traffic, using access control lists to route requests, handling HTTPS traffic, load balancing MySQL databases, and proxying SSH connections. The latest version of HAProxy introduced new features like connection tracking, limiting connections per IP address, and peer synchronization between HAProxy instances. HAProxy provides high performance, flexibility, and scalability for traffic routing and distribution.
The document discusses configuring Ubuntu to use DNS caching to improve performance. It explains that DNS maps domain names to IP addresses. It then describes installing and configuring the Bind9 DNS server on Ubuntu to use the local loopback IP address of 127.0.0.1 for caching. Tests were run using the dig command to query domain names and IP addresses, showing query times improved after configuring DNS caching. The conclusion states that DNS caching can improve browsing speed and network performance by reducing latency and bottlenecks from repetitive DNS queries.
This document provides an overview of basic Linux commands for tasks like file management, installation, networking, compression, searching, SSH, permissions and more. It explains commands for changing directories, listing files, copying/moving files, installing packages, pinging hosts, compressing files and directories, searching for patterns, remote login via SSH, and managing processes and system information.
Configuration of SFTP Server on CentOS 8.pdfKaan Aslandağ
This document provides instructions for configuring an SFTP server on CentOS 8. It describes installing vsftpd using DNF, backing up and editing the vsftpd configuration file, configuring allowed users in the user_list file, enabling chroot jailing for security, generating a TLS certificate for encrypted connections, configuring the vsftpd service to use the certificate, opening firewall ports for FTP/SFTP, and adding a test SFTP user.
Hebrew Windows Cluster 2012 in a one slide diagramG M
a small ppt explain in hebrew how the wondows cluster works in one slide - i made it for forums.tapuz.co.il/it and share here for everyone usage - enjoy.
מצגת בשקופית אחת בעברית על איך עובד הקלאסטר של ווינדוס בשרטוט פשוט ומובן
This document provides instructions for configuring a basic NFS server on a Red Hat Enterprise Linux 7 system to share directories with a client system. It describes installing NFS and related packages, exporting directories like /opt/nfs, configuring the firewall and starting the NFS daemon on the server. It also covers installing NFS packages, mounting exported directories and testing access on the client. The document further discusses making the NFS shares persist after reboots by configuring fstab files on both systems. It concludes by sharing a home directory through NFS and confirming access.
linux-commandline-magic-Joomla-World-Conference-2014Peter Martin
The Linux command line is a powerful tool. The majority of webservers run on Linux/Unix. Some hosting companies offer SSH access to their hosting environment. Via SSH you can login and use the Linux command line.
In this presentation, Peter will show you some time-saving command line commands that you can use for certain tasks on your Joomla websites:
some basic SSH command line commands
Analyzing & recovering a hacked website
Backup a website or move it to another server
Finding unused files
Setting up a test environment
This document describes migrating a database from a standalone MySQL configuration to a Galera cluster for high availability and redundancy. It outlines the existing infrastructure including web, mail, and database servers managed by Puppet. It then details removing the existing MySQL data and joining the nodes to the new Galera cluster. Configuration files are shown for Galera settings like the state snapshot transfer method and slave threads. System information is displayed for one of the Galera nodes including the large production database size and high query throughput. The GitHub link shows example Puppet code to check the Galera cluster status and return errors if not in the primary or connected states.
The document summarizes steps taken in an iptables lab to configure firewall rules allowing specific traffic. It shows how to allow SSH from 10.30.30.254 to 10.30.30.5, then add rules for DNS, HTTP and HTTPS. One rule is deleted without saving, so it will not persist after a restart. Testing connection attempts confirm the active rules.
This document provides steps to install Odoo 13 on Ubuntu 19.04. It involves updating the system, creating an odoo user, installing PostgreSQL as the database server, installing Python dependencies, Odoo web dependencies, downloading and installing Odoo 13, configuring the odoo-server.conf file, creating log files, setting up the service, and testing. It also provides steps to install wkhtmltopdf for PDF printing support.
This document provides instructions for enabling the EPEL (Extra Packages for Enterprise Linux) repository on RHEL (Red Hat Enterprise Linux) systems to gain access to additional packages. It describes downloading the EPEL rpm package, installing it to enable the repository, and checking that it is functioning properly by viewing available packages and installing a library from EPEL.
Configuration of BIND DNS Server On CentOS 8Kaan Aslandağ
This document provides instructions for configuring a BIND DNS server on CentOS 8. It involves installing the BIND packages, enabling the named service to start at reboot, editing the configuration files to listen on all interfaces and define the forward and reverse DNS zones. The forward zone maps hostnames to IP addresses, while the reverse zone maps IP addresses to hostnames. The zone files are then created and validated before restarting the named service.
This document introduces MongoDB, a NoSQL database that stores data in flexible, JSON-like documents rather than rigid tables. It notes that MongoDB is scalable, supports many programming languages, is free to use, and easy to install. The document provides instructions on installing MongoDB and the PHP driver and includes examples of basic usage from the terminal.
Mise en place d'un client VPN l2tp IPsec sous dockerNicolas Trauwaen
This document describes how to set up a L2TP/IPsec VPN client within a Docker container. It provides details on:
1) The motivation for putting the VPN client in a container, including easier deployment and configuration.
2) The components used - including Ubuntu, StrongSwan for IPsec, and Xl2tpd for L2TP.
3) The steps to build a Docker image with these components and configure it using environment variables to connect to a VPN server.
4) How to run the Docker container, check the VPN connection status, and next steps to improve the image size and routing.
The document describes steps to set up a test environment using Vagrant and Ansible:
1. Clone Vagrantfile and Ansible role repositories for nginx configuration
2. Create vagrant.yaml file to define VM ports and site.yaml playbook to configure nginx
3. Run vagrant up to provision VM, vagrant provision to run Ansible, and ansible-playbook to run the playbook
4. Connect to the VM via vagrant ssh and use the private key to ssh
5. Destroy the test environment with vagrant destroy
This presentation summarizes how to configure various Linux server applications including a YUM server, SSH server, FTP server, and more. It provides step-by-step instructions on setting up each service, including installing required packages, editing configuration files, starting and enabling services, and testing connectivity. The document contains details on configuring a YUM server to install packages from a DVD repository, setting up an SSH server for remote login, setting up an FTP server with VSFTPD, and testing access via FTP clients.
This document provides instructions for setting up a MongoDB replica set across multiple virtual machines. It describes installing MongoDB on each VM, creating directories to store data, configuring the yum repository, and installing MongoDB packages. It then explains how to initialize and configure a local 3-node replica set, add members, and check the replica set status. Finally, it briefly discusses connecting to primary and secondary members, performing CRUD operations, and setting up MongoDB Management Service (MMS) for monitoring and backups.
This document describes how to set up a bastion server or "moat" to provide a secure single point of entry to application servers. It involves installing necessary packages on the bastion server like SSH, updating packages, changing the SSH port, disabling password logins, setting up firewall rules to only allow SSH from the bastion server, creating a special user group and keymaster user for access, and configuring SSH proxying through the bastion to access other servers securely.
This document provides a cheat sheet on how to configure the Nginx web server for common use cases such as setting ports and domain names, serving static files, redirects, reverse proxying, TLS/SSL encryption, load balancing, and access logging. It includes configuration examples for listening on ports, setting server names, serving static assets, 301 and 302 redirects, basic and upgraded reverse proxying, HTTPS setup, and load balancing multiple servers.
GNOME is a desktop environment for Linux distributions that is developed by the GNOME Project. It is written in programming languages like C, C++, Vala, Python and JavaScript. GNOME is used by many popular Linux distributions as their default desktop environment and has over 40 language translations. It also has an active community developing applications and projects using a GPL license. The GNOME Asia Summit is an annual conference about GNOME in Asia that was held in Depok, Indonesia in 2015.
Bringing Indonesia Scripts and Local Language to GNOMEprinceofgiri
Bringing Indonesian scripts and local languages to GNOME
This document discusses efforts to promote Indonesian local languages and scripts within the GNOME desktop environment. It provides background on Indonesia's geographic diversity and over 700 local languages. The author works on the BlankOn Linux distribution, which uses the Manokwari desktop shell for GNOME. Challenges include Indonesia's geography, limited knowledge and use of local languages, and lack of upstream contributions. Results so far include integrating the Banyumas, Aceh, Bali, Batak Toba, Buginese, Jawa, Rejang and Sundanese languages and scripts. More work is needed to encourage contributions and cooperate with other organizations.
The document introduces a workshop on developing mobile apps with HTML5, jQuery Mobile, and PhoneGap. It provides an overview of HTML5 and its new features, jQuery Mobile which allows building a single high-branded website or app to work on multiple platforms, and PhoneGap which allows building apps in the cloud and accessing device APIs. The workshop will include introductions to these technologies as well as use of text editors, browsers, and connecting to an Android device.
Dokumen tersebut membahas berbagai kombinasi warna yang dapat digunakan, mulai dari warna akromatik, monokrom, komplementer, pastel & dark, analog, clash, split komplementer, hingga kombinasi warna primer, sekunder dan tersier. Setiap kombinasi warna memiliki karakteristik sendiri seperti kesan yang ditimbulkan, kesulitan pemaduan, dan kecocokan untuk berbagai aplikasi.
Modul ini membahas tentang instalasi dan penggunaan Quantum GIS (QGIS) sebagai alternatif perangkat lunak pemetaan sumber terbuka. QGIS dapat diinstal pada berbagai sistem operasi termasuk Windows, Linux, dan Mac. Modul ini memberikan panduan langkah-langkah instalasi QGIS di Windows beserta penjelasan singkat mengenai fitur dan kemampuan QGIS.
This document discusses the installation and requirements of the Zimbra Collaboration Suite (ZCS) 7.1 on BlankOn Linux. It provides the system requirements for evaluation, testing and production environments. It also describes a simple topology and steps to install ZCS on BlankOn including installing repositories, packages and services. Finally, it compares the different Zimbra product editions and support options.
Lokakarya seni grafis membahas 6 komponen desain grafis yaitu garis, bentuk, warna, ilustrasi, huruf, dan ruang. Komponen-komponen tersebut membentuk prinsip-prinsip desain seperti keseimbangan, irama, skala, fokus, dan kesatuan untuk menciptakan kesan tertentu pada karya desain grafis.
This document discusses using a GNOME desktop environment on an Android dongle or stick computer. It notes some advantages like low power consumption, ability to connect to TV via HDMI, and using a standard phone charger. However, it also points out some disadvantages such as needing to know the ARM architecture and lack of documentation. It provides links to worked images and instructions for a more difficult manual build process requiring custom kernel and boot parameters.
This document provides steps to implement DNS and LDAP in Tiguin for a Samba PDC. It involves:
1. Installing and configuring Bind9 to setup DNS for the "eclipse.com" domain.
2. Installing slapd and adding LDAP schemas to setup an LDAP server for the "eclipse.com" domain.
3. Installing Samba and configuring it to use the LDAP server for user/group authentication and authorization. This allows central management of users and groups.
1. The document provides instructions for installing CentOS and setting up a DNS server on the installed CentOS system.
2. It describes downloading and burning the CentOS ISO, installing it on a computer, and configuring the network interfaces and other installation options.
3. It also explains how to generate an rndc key for bind, edit the rndc.conf and named.conf files, and enable DNS services on the new CentOS server.
The document provides instructions for installing and configuring various Linux server applications and services, including Jabberd, Sendmail, Qpopper, Squirrelmail, Samba, and others. It describes downloading and extracting source files, editing configuration files, and commands to compile, install, and start the servers. The instructions are provided in a step-by-step format intended for novice Linux system administrators.
The document provides instructions for installing and configuring a Samba file sharing server on CentOS 7. It describes installing Samba packages, creating a shared directory, configuring user access, editing configuration files, starting services, adding firewall rules, and connecting from Windows and Linux clients. The key steps are installing Samba packages, configuring shares and permissions in smb.conf, starting smb and nmb services, enabling them to start on boot, and connecting clients to the shared directory.
Cent os 5.1 - configuring samba 3.0 to use the ads security modeB Sasi Kumar
This document provides instructions for configuring Samba 3.0 on CentOS to use Active Directory authentication by joining an Active Directory domain as a member server. It involves installing Kerberos and configuring the /etc/krb5.conf file to point to the Active Directory domain controller as the KDC. Samba is then configured using the security=ADS mode to authenticate users against Active Directory using LDAP and Kerberos. The goal is to allow Windows users to access Samba shares without separate Linux accounts and keep passwords synchronized between Active Directory and Samba.
This document provides instructions for quickly installing and configuring Nagios, an open source network monitoring tool. It outlines steps to install Nagios and common plugins, create user accounts, and compile the software. The bulk of the document then explains how to set up basic configurations for time periods, contacts to receive alerts, hosts to monitor, host groups, and example services to check such as network connectivity. It also includes instructions for configuring the web server to access Nagios's interface. The goal is to demonstrate a working Nagios setup that can monitor a simple network with one monitoring host and one NFS server.
This document provides instructions for quickly installing and configuring Nagios, an open source network monitoring tool. It outlines steps to install Nagios and common plugins, create user accounts, and compile the software. The document then explains how to configure basic monitoring of hosts and services in Nagios, including time periods, contacts, host and service definitions, and enabling the web interface. The configuration would monitor connectivity for two systems and serves as a starting point for basic network monitoring with Nagios.
This document provides a quick guide to installing and configuring Nagios for basic network monitoring. It outlines steps to install Nagios and plugins, configure monitoring of hosts, services, contacts, and the web interface. The guide explains setting up monitoring of a sample network with one monitoring host and one NFS server to check connectivity and NFS service status.
This document provides instructions for configuring IP addresses, hostnames, DHCP server, and DNS server on a Debian Lenny server. It describes editing configuration files such as interfaces, hostname, and dhcpd.conf to set the IP address, netmask, gateway and hostname. It also explains installing the dhcp3-server and bind9 packages and editing files such as dhcpd.conf and named.conf to configure the DHCP and DNS servers, respectively. Commands shown include ifconfig, hostname, service networking commands, and apt-get install.
The document provides an overview of domain name server configuration. It discusses setting up a caching nameserver by configuring forwarders, and setting up a server as a primary master for a domain by creating zone files. It also covers setting up a secondary master by allowing zone transfers from the primary master and restarting services.
samba server setup Pts ppt (rohit malav)Rohit malav
Samba
Samba is a free software re-implementation of the SMB networking protocol, and was originally developed by Andrew Tridgell. Samba provides file and print services for various Microsoft Windows clients and can integrate with a Microsoft Windows Server domain, either as a Domain Controller or as a domain member.
6. reverse primarydns using bind for ptr and cname record ipv6 with forwarderPiyush Kumar
This document provides instructions for configuring a primary DNS server on Linux using BIND to serve reverse DNS lookups for IPv6 addresses. It describes installing BIND, editing the named.conf configuration file to define zones for IPv6 address ranges, creating zone files with PTR records, and testing lookups to the new primary DNS server from a client.
The presentation summarizes DNS, SMTP, and POP3 protocols. It discusses configuring a local host file to map IP addresses to hostnames, setting up a DNS server using Bind on Windows 7, and interacting with an email server using SMTP and POP3 commands via Telnet. The objectives are to resolve hostnames, configure DNS, and send emails between mailboxes on the email server. Requirements include networked PCs and servers running Windows 7 with TCP/IP and an email server configured with user mailboxes.
The presentation discusses DNS, SMTP, and POP3 protocols. It provides instructions on configuring a DNS server on Windows 7, including downloading and installing BIND, creating configuration files, and testing the DNS server. It also describes using Telnet and SMTP commands to send emails between servers, and creating a batch file to automate email messaging through the command prompt.
1. The document describes how to set up a PXE kickstart server to automatically install CentOS 5.3 over the network using DHCP and TFTP. It provides instructions for configuring the TFTP, DHCP and NFS servers, creating a kickstart installation tree and kickstart files.
2. Additional clients can be added by modifying the DHCP configuration to assign them a static IP, creating a customized kickstart file, and PXE booting the client to initiate the network installation.
3. Example configurations are provided for the /etc/dhcpd.conf DHCP configuration file and a sample kickstart file.
Samba server linux (SMB) BY ROHIT MALAVRohit malav
Samba is a free software re-implementation of the SMB networking protocol, and was originally developed by Andrew Tridgell. Samba provides file and print services for various Microsoft Windows clients and can integrate with a Microsoft Windows Server domain, either as a Domain Controller or as a domain member.
This document provides instructions for configuring a Samba file server on CentOS 5.6 using the tdbsam backend for user authentication. Key steps include disabling SELinux and the firewall, installing Samba packages, configuring the smb.conf file to use tdbsam security and set shares, adding users with smbpasswd, and starting the Samba services. Additional notes cover starting Samba services on CentOS 6 and using Webmin as a GUI management tool for Samba.
This document provides instructions for installing and configuring BIND (DNS) on a CentOS 6 server. It describes how to configure the IP address, hostname, and DNS settings. It also explains how to install and configure BIND, including creating forward and reverse DNS zones for the dragongang.com domain. The configuration is tested using nslookup and dig to verify name resolution.
Samba is an open source software suite that allows file and printer sharing between Linux/Unix systems and Windows clients. It uses the SMB protocol to provide services to SMB/CIFS clients. The document discusses installing and configuring Samba, including creating a smb.conf file to define shares, users, and permissions. It also covers connecting Samba clients and basic troubleshooting.
Vibrant Technologies is headquarted in Mumbai,India.We are the best Linux training provider in Navi Mumbai who provides Live Projects to students.We provide Corporate Training also.We are Best Linux classes in Mumbai ac
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
"Choosing proper type of scaling", Olena SyrotaFwdays
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Northern Engraving | Nameplate Manufacturing Process - 2024Northern Engraving
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
"What does it really mean for your system to be available, or how to define w...Fwdays
We will talk about system monitoring from a few different angles. We will start by covering the basics, then discuss SLOs, how to define them, and why understanding the business well is crucial for success in this exercise.
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Session 1 - Intro to Robotic Process Automation.pdfUiPathCommunity
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
"NATO Hackathon Winner: AI-Powered Drug Search", Taras KlobaFwdays
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Principle of conventional tomography-Bibash Shahi ppt..pptx
Tutorial : Zimbra on BlankOn
1. Persiapan Instalasi Zimbra di BlankOn 6 Ombilin
1. Instal blankon seperti biasa. Sebagai informasi, zimbra nantinya akan diletakkan di
/opt/zimbra/. Jadi perhitungkan pengaturan partisi Anda
2. Pasang kernel server. Nama paketnya linux-image-server
3. Pasang ssh dan bind9
4. Konfigurasi jaringan sesuai kondisi jaringan Anda. Saya menggunakan jaringan lokal untuk
awal install, nanti jaringan publik dengan mudah bisa disesuaikan.
Contoh isi berkas /etc/network/interfaces :
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.5.107
netmask 255.255.255.0
gateway 192.168.5.1
5. Restart service network
sudo /etc/init.d/networking/restart
6. Ubah file /etc/hosts menjadi seperti di bawah ini :
127.0.0.1 localhost
192.168.5.107 mail.primata.co.id mail
7. Ubah file /etc/resolv.conf agar memuat urutan IP DNS seperti di bawah ini :
nameserver 192.168.5.107
nameserver 30.30.30.1
nameserver 8.8.8.8
nameserver 202.148.1.196
IP baris pertama adalah ip server sendiri, IP baris ke dua adalah IP DNS lokal, IP baris ke 3
adalah IP DNS Google dan IP baris ke 4 adalah IP DSN ISP.
8. Install webmin. Webmin ini digunakan untuk memudahkan kita dalam mengkonfigurasi DNS.
Webmin dapat diunduh di http://webmin.com/. Sebelum memasang webmin, pasang dulu
dependensinya. Adapun dependensinya sebagai berikut :
sudo aptitude install libnetssleayperl libauthenpamperl
libioptyperl aptshowversions
9. Silahkan masuk ke halaman konfigurasi webmin dengan alamat https://localhost:10000/ atau
https://192.168.5.107:10000 (untuk contoh dengan IP di atas). Masukkan username dan
Zimbra di BlankOn by princeofgiri@di.blankon.in 1 of 16
2. password user yang memiliki hak sudo atau user root.
Zimbra di BlankOn by princeofgiri@di.blankon.in 2 of 16
3. Konfigurasi DNS dengan Webmin
1. Sebelum konfigurasi DNS, hapus apparmour terlebih dahulu dengan cara :
sudo aptitude remove apparmor
sudo aptitude purge apparmor
2. Masuk ke halaman administrasi Webmin menggunakan browser. Isikan username dan
password
3. Pilih Servers | Bind DNS Server
4. Kita perlu mengkonfigurasi DNS dengan konsentrasi pada hal yang lebih utama yaitu setting
A dan MX Record. Pertama kita perlu membuat Master Zone dimana Master Zone akan
mengatur dan bertanggung jawab penuh terhadap domain yang dikelolanya. Klik Create
Master Zone dan isikan Domain / Network dengan nama domain, master server dengan
name server. Kalau kita pakai 1 komputer, kita bisa set dengan nama komputer kita sendiri.
Kondisi yang lain diset default setelah diisi klik Create.
Zimbra di BlankOn by princeofgiri@di.blankon.in 3 of 16
4. Setelah di klik Create, kita akan masuk ke halaman Edit Master zone. Di halaman ini kita bisa
melakukan berbagai setting records, baik A Records, MX records maupun menambahkan
canonical name atau nama alias.
5. Pertama kita membuat A Records untuk name server (ns). Name server adalah komputer yang
menjadi dns server. Umumnya, name server ditulis dengan prefik ns.
6. Klik pada bagiaan Address dan isikan seperti contoh gambar.
7. Ulangi lagi untuk membuat address lainnya seperti (mail.primata.co.id)
Zimbra di BlankOn by princeofgiri@di.blankon.in 4 of 16
5. 8. Setelah selesai, klik Return Record Types
9. Pilih bagian Mail Server untuk melakukan konfigurasi MX Records. Ketikkan nama email
server pada isian Mail Server. Isian name biarkan kosong karena akan diisi dengan nama
domain secara otomatis. Jangan lupa isi Priority karena jika kita memiliki beberapa mail
server backup, mail server dengan prioritas tertinggi akan menjadi email server utama.
Setelah selesai, click Create.
10. Kembali ke halaman utama Bind DNS Server lalu restart Bind DNS Server dengan
Zimbra di BlankOn by princeofgiri@di.blankon.in 5 of 16
6. menggunakan perintah Apply Configuration atau dengan melalui terminal dengan mengetik
sudo /etc/init.d/bind9 restart.
11. Setelah DNS ter-restart, silahkan diuji dengan menjalankan printah : nslookup namadomain.
Jika benar, hasilnya kurang lebih seperti di bawah ini :
haris@mail:~$ nslookup mail.primata.co.id
Server: 192.168.5.107
Address: 192.168.5.107#53
Name: mail.primata.co.id
Address: 192.168.5.107
Zimbra di BlankOn by princeofgiri@di.blankon.in 6 of 16
7. Instalasi Zimbra 7.1
1. Install paket dependensi zimbra dengan cara seperti di bawah ini :
sudo aptget install libidn11 libpcre3 libgmp3c2 libexpat1 libstdc++6 libltdl7
libperl5.10 sysstat fetchmail sqlite3
2. Ekstak berkas zimbra (zcs-7.1.0_GA_3140.UBUNTU10_64.20110329151347.tgz) ke
folder /opt/
haris@mail:~$ sudo tar xzvf zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347.tgz C
/opt/
[sudo] password for haris:
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
apache_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
core_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
ldap_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
logger_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
memcached_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
mta_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
proxy_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
snmp_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
spell_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/packages/zimbra
store_7.1.0_GA_3140.UBUNTU10_64_amd64.deb
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/bin/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/bin/get_plat_tag.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/bin/zmdbintegrityreport
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/data/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/data/versionsinit.sql
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/YPL.txt
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/zcl.txt
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/zimbra_public_eula_2.1.txt
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/admin.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/Fedora Server Config.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/Import_Wizard_Outlook.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/MigrationWizard_Domino.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/MigrationWizard.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/OSmultiserverinstall.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/quick_start.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/RNZCSO_2005Beta.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/User Instructions for ZCS
Import Wizard.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/Zimbra iCalendar Migration
Guide.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/Zimbra_Release_Note.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/Zimbra Schema.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/docs/en_US/ZWC User Guide_7_0.pdf
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/
Zimbra di BlankOn by princeofgiri@di.blankon.in 7 of 16
8. zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/modules/
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/modules/getconfig.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/modules/packages.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/modules/postinstall.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/addUser.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/globals.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/util/utilfunc.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/readme_source_en_US.txt
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/readme_binary_en_US.txt
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/install.sh
zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/README.txt
haris@mail:~$
3. Masuk ke folder hasil ekstrak tadi dan jalankan perintah ./install.sh seperti di bawah ini :
haris@mail:~$ cd /opt/zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347/
haris@mail:/opt/zcs7.1.0_GA_3140.UBUNTU10_64.20110329151347$ sudo ./install.sh
Operations logged to /tmp/install.log.5293
Checking for existing installation...
zimbraldap...NOT FOUND
zimbralogger...NOT FOUND
zimbramta...NOT FOUND
zimbrasnmp...NOT FOUND
zimbrastore...NOT FOUND
zimbraapache...NOT FOUND
zimbraspell...NOT FOUND
zimbraconvertd...NOT FOUND
zimbramemcached...NOT FOUND
zimbraproxy...NOT FOUND
zimbraarchiving...NOT FOUND
zimbracluster...NOT FOUND
zimbracore...NOT FOUND
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE.
ZIMBRA, INC. ("ZIMBRA") WILL ONLY LICENSE THIS SOFTWARE TO YOU IF YOU
FIRST ACCEPT THE TERMS OF THIS AGREEMENT. BY DOWNLOADING OR INSTALLING
THE SOFTWARE, OR USING THE PRODUCT, YOU ARE CONSENTING TO BE BOUND BY
THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS
AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL OR USE THE PRODUCT.
License Terms for the Zimbra Collaboration Suite:
http://www.zimbra.com/license/zimbra_public_eula_2.1.html
Do you agree with the terms of the software license agreement? [N] y
Checking for prerequisites...
FOUND: NPTL
FOUND: sudo1.7.2p11ubuntu5.3
FOUND: libidn111.152
FOUND: libpcre37.83build1
FOUND: libgmp3c22:4.3.2+dfsg1ubuntu1
FOUND: libexpat12.0.17ubuntu1
FOUND: libstdc++64.4.34ubuntu5
FOUND: libperl5.105.10.18ubuntu2.1
Checking for suggested prerequisites...
FOUND: perl5.10.1
FOUND: sysstat
Zimbra di BlankOn by princeofgiri@di.blankon.in 8 of 16
9. FOUND: sqlite3
Prerequisite check complete.
Checking for installable packages
Found zimbracore
Found zimbraldap
Found zimbralogger
Found zimbramta
Found zimbrasnmp
Found zimbrastore
Found zimbraapache
Found zimbraspell
Found zimbramemcached
Found zimbraproxy
Select the packages to install
Install zimbraldap [Y]
Install zimbralogger [Y]
Install zimbramta [Y]
Install zimbrasnmp [Y]
Install zimbrastore [Y]
Install zimbraapache [Y]
Install zimbraspell [Y]
Install zimbramemcached [N]
Install zimbraproxy [N]
Checking required space for zimbracore
checking space for zimbrastore
Installing:
zimbracore
zimbraldap
zimbralogger
zimbramta
zimbrasnmp
zimbrastore
zimbraapache
zimbraspell
The system will be modified. Continue? [N] y
Removing /opt/zimbra
Removing zimbra crontab entry...done.
Cleaning up zimbra init scripts...done.
Cleaning up /etc/ld.so.conf...done.
Cleaning up /etc/security/limits.conf...done.
Finished removing Zimbra Collaboration Suite.
Installing packages
Zimbra di BlankOn by princeofgiri@di.blankon.in 9 of 16
10. zimbracore......zimbracore_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbraldap......zimbraldap_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbralogger......zimbralogger_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbramta......zimbramta_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbrasnmp......zimbrasnmp_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbrastore......zimbrastore_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbraapache......zimbraapache_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
zimbraspell......zimbraspell_7.1.0_GA_3140.UBUNTU10_64_amd64.deb...done
Operations logged to /tmp/zmsetup.05162011184921.log
Installing LDAP configuration database...done.
Setting defaults...
DNS ERROR resolving MX for mail.primata.co.id
It is suggested that the domain name have an MX record configured in DNS
Change domain name? [Yes]
4. Silahkan isi nama domain, dalam contoh ini diisi primata.co.id
Create domain: [mail.primata.co.id] primata.co.id
MX: mail.primata.co.id (192.168.5.107)
Interface: 192.168.5.107
Interface: 127.0.0.1
done.
Checking for port conflicts
Main menu
1) Common Configuration:
2) zimbraldap: Enabled
3) zimbrastore: Enabled
+Create Admin User: yes
+Admin user to create: admin@primata.co.id
******* +Admin Password UNSET
+Antivirus quarantine user: virus
quarantine.cazkum6dqr@primata.co.id
+Enable automated spam training: yes
+Spam training user: spam.icbxjs1lb@primata.co.id
+Nonspam(Ham) training user: ham.mskpchxgl@primata.co.id
+SMTP host: mail.primata.co.id
+Web server HTTP port: 80
+Web server HTTPS port: 443
+Web server mode: http
+IMAP server port: 143
+IMAP server SSL port: 993
+POP server port: 110
+POP server SSL port: 995
+Use spell check server: yes
+Spell server URL:
http://mail.primata.co.id:7780/aspell.php
+Configure for use with mail proxy: FALSE
+Configure for use with web proxy: FALSE
+Enable version update checks: TRUE
+Enable version update notifications: TRUE
+Version update notification email: admin@primata.co.id
+Version update source email: admin@primata.co.id
4) zimbramta: Enabled
5) zimbrasnmp: Enabled
6) zimbralogger: Enabled
7) zimbraspell: Enabled
Zimbra di BlankOn by princeofgiri@di.blankon.in 10 of 16
11. 8) Default Class of Service Configuration:
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
Address unconfigured (**) items (? help)
5. Silahkan pilih menu ke 3 dengan mengetikkan angka 3
Address unconfigured (**) items (? help) 3
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@primata.co.id
** 4) Admin Password UNSET
5) Antivirus quarantine user: virus
quarantine.cazkum6dqr@primata.co.id
6) Enable automated spam training: yes
7) Spam training user: spam.icbxjs1lb@primata.co.id
8) Nonspam(Ham) training user: ham.mskpchxgl@primata.co.id
9) SMTP host: mail.primata.co.id
10) Web server HTTP port: 80
11) Web server HTTPS port: 443
12) Web server mode: http
13) IMAP server port: 143
14) IMAP server SSL port: 993
15) POP server port: 110
16) POP server SSL port: 995
17) Use spell check server: yes
18) Spell server URL:
http://mail.primata.co.id:7780/aspell.php
19) Configure for use with mail proxy: FALSE
20) Configure for use with web proxy: FALSE
21) Enable version update checks: TRUE
22) Enable version update notifications: TRUE
23) Version update notification email: admin@primata.co.id
24) Version update source email: admin@primata.co.id
Select, or 'r' for previous menu [r]
6. Silahkan pilih nomor 4 dengan mengetikkan angka 4 dan isikan password Anda. Lalu tekan
[ r ] untuk ke main menu dan tekan [ a ] untuk menerapkan/apply.
Password for admin@primata.co.id (min 6 characters): [8WXjuFLcQ] password
Store configuration
1) Status: Enabled
2) Create Admin User: yes
3) Admin user to create: admin@primata.co.id
4) Admin Password set
5) Antivirus quarantine user: virus
quarantine.cazkum6dqr@primata.co.id
6) Enable automated spam training: yes
7) Spam training user: spam.icbxjs1lb@primata.co.id
8) Nonspam(Ham) training user: ham.mskpchxgl@primata.co.id
9) SMTP host: mail.primata.co.id
10) Web server HTTP port: 80
Zimbra di BlankOn by princeofgiri@di.blankon.in 11 of 16
12. 11) Web server HTTPS port: 443
12) Web server mode: http
13) IMAP server port: 143
14) IMAP server SSL port: 993
15) POP server port: 110
16) POP server SSL port: 995
17) Use spell check server: yes
18) Spell server URL:
http://mail.primata.co.id:7780/aspell.php
19) Configure for use with mail proxy: FALSE
20) Configure for use with web proxy: FALSE
21) Enable version update checks: TRUE
22) Enable version update notifications: TRUE
23) Version update notification email: admin@primata.co.id
24) Version update source email: admin@primata.co.id
Select, or 'r' for previous menu [r] r
Main menu
1) Common Configuration:
2) zimbraldap: Enabled
3) zimbrastore: Enabled
4) zimbramta: Enabled
5) zimbrasnmp: Enabled
6) zimbralogger: Enabled
7) zimbraspell: Enabled
8) Default Class of Service Configuration:
r) Start servers after configuration yes
s) Save config to file
x) Expand menu
q) Quit
*** CONFIGURATION COMPLETE press 'a' to apply
Select from menu, or press 'a' to apply config (? help) a
Save configuration data to a file? [Yes]
Save config in file: [/opt/zimbra/config.10980]
Saving config in /opt/zimbra/config.10980...done.
The system will be modified continue? [No] yes
Operations logged to /tmp/zmsetup.05162011184921.log
Setting local config values...done.
Setting up CA...done.
Deploying CA to /opt/zimbra/conf/ca ...done.
Creating SSL certificate...done.
Installing mailboxd SSL certificates...done.
Initializing ldap...done.
Setting replication password...done.
Setting Postfix password...done.
Setting amavis password...done.
Setting nginx password...done.
Creating server entry for mail.primata.co.id...done.
Saving CA in ldap ...done.
Saving SSL Certificate in ldap ...done.
Setting spell check URL...done.
Setting service ports on mail.primata.co.id...done.
Adding mail.primata.co.id to zimbraMailHostPool in default COS...done.
Installing webclient skins...
beach...done.
oasis...done.
lemongrass...done.
smoke...done.
Zimbra di BlankOn by princeofgiri@di.blankon.in 12 of 16
13. twilight...done.
hotrod...done.
bones...done.
lavender...done.
tree...done.
sky...done.
bare...done.
lake...done.
sand...done.
carbon...done.
waves...done.
steel...done.
pebble...done.
Finished installing webclient skins.
Setting zimbraFeatureTasksEnabled=TRUE...done.
Setting zimbraFeatureBriefcasesEnabled=TRUE...done.
Setting MTA auth host...done.
Setting TimeZone Preference...done.
Initializing mta config...done.
Setting services on mail.primata.co.id...done.
Creating domain primata.co.id...done.
Setting default domain name...done.
Creating domain primata.co.id...already exists.
Creating admin account admin@primata.co.id...done.
Creating root alias...done.
Creating postmaster alias...done.
Creating user spam.icbxjs1lb@primata.co.id...done.
Creating user ham.mskpchxgl@primata.co.id...done.
Creating user virusquarantine.cazkum6dqr@primata.co.id...done.
Setting spam training and Antivirus quarantine accounts...done.
Initializing store sql database...done.
Setting zimbraSmtpHostname for mail.primata.co.id...done.
Configuring SNMP...done.
Checking for default IM conference room...not present.
Initializing default IM conference room...done.
Setting up syslog.conf...done.
You have the option of notifying Zimbra of your installation.
This helps us to track the uptake of the Zimbra Collaboration Suite.
The only information that will be transmitted is:
The VERSION of zcs installed (7.1.0_GA_3140_UBUNTU10_64)
The ADMIN EMAIL ADDRESS created (admin@primata.co.id)
Notify Zimbra of your installation? [Yes]
Notifying Zimbra of installation via http://www.zimbra.com/cgibin/notify.cgi?
VER=7.1.0_GA_3140_UBUNTU10_64&MAIL=admin@primata.co.id
Notification complete
Starting servers...done.
Installing common zimlets...
com_zimbra_phone...done.
com_zimbra_cert_manager...done.
com_zimbra_srchhighlighter...done.
com_zimbra_social...done.
com_zimbra_date...done.
com_zimbra_attachcontacts...done.
com_zimbra_dnd...done.
com_zimbra_adminversioncheck...done.
com_zimbra_attachmail...done.
com_zimbra_webex...done.
Zimbra di BlankOn by princeofgiri@di.blankon.in 13 of 16
14. com_zimbra_linkedin...done.
com_zimbra_bulkprovision...done.
com_zimbra_url...done.
com_zimbra_email...done.
Finished installing common zimlets.
Restarting mailboxd...done.
Setting up zimbra crontab...done.
Moving /tmp/zmsetup.05162011184921.log to /opt/zimbra/log
Configuration complete press return to exit
7. Untuk memastikan apakah instalasi berhasil atau tidak, silahkan buka browser dan buka
alamat http://alamatipserveremail/ (dalam contoh ini http://192.168.5.107) baik melalui
server itu sendiri maupun jaringan lokal server.
8. Masukkan username dan passwordnya. Username = admin dan passwordnya seperti yang
sudah dibuat saat instalasi zimbra tadi.
Zimbra di BlankOn by princeofgiri@di.blankon.in 14 of 16
15. 9. Silahkan uji dengan mengirim email ke diri sendiri (admin@namadomain.com).
10. Untuk menuju halaman Administrasi Zimbra, klik menu Admin Console di bagian kanan
atas.
Zimbra di BlankOn by princeofgiri@di.blankon.in 15 of 16
16. Catatan :
• Tulisan ini terinspirasi http://vavai.com dan http://ngadimin.com.
• Silahkan gunakan tulisan ini sebebas-bebasnya.
• Berkontribusilah untuk pengembangan FOSS di Indonesia.
Zimbra di BlankOn by princeofgiri@di.blankon.in 16 of 16