Tutorial 2: Differential equations: Reducible to Variable Separable
•
0 likes•406 views
In this tutorial, we study about Reducible to Variable Separable. If the given equation is not separable then using this method it can reduced to variable separable form then the solution can be obtained by separating the variable and at the end we have to put the value of original variables
Report
Share
Report
Share
Download to read offline
Recommended
Engineering Mechanice Lecture 04
1) The document discusses force-couple systems and how a single force can be replaced by an equivalent force-couple system. It explains that a force produces both translational and rotational effects, while a couple only produces rotational effects.
2) It provides an example of replacing a force F acting at point A with two equal and opposite forces F and -F acting along parallel lines at point B, which form a couple with moment Fd. This force-couple system is equivalent to the original single force.
3) The concept of a force-couple equivalent enables the transfer of a force to another location outside its line of action, which has many applications in mechanics.
6161103 8.4 frictional forces on screws
Screws are commonly used as fasteners to transmit power or motion between machine parts. A screw can be thought of as an inclined plane wrapped around a cylinder. When a screw is rotated, the nut moves along the inclined plane of the screw thread. The distance the nut moves in one revolution is called the lead of the screw. Large axial loads on a screw generate significant frictional forces on the threads. The moment required to turn a screw under an axial load depends on the frictional forces and can be calculated using force and moment equilibrium equations. A self-locking screw will remain locked in place through frictional forces alone when the applied moment is removed.
Mechanics of Materials 8th Edition Hibbeler Solutions Manual
Full download http://alibabadownload.com/product/mechanics-of-materials-8th-edition-hibbeler-solutions-manual/
Mechanics of Materials 8th Edition Hibbeler Solutions Manual
57848046 metodos-operativos-de-calculo-vectorial-fausto-cervantes
Este documento es un libro sobre métodos operativos de cálculo vectorial escrito por Fausto Cervantes Ortiz para estudiantes de ingeniería de la Universidad Autónoma de la Ciudad de México (UACM). El libro contiene introducciones y explicaciones detalladas sobre temas como vectores, rectas, planos, superficies de segundo orden, funciones con valores vectoriales, funciones de varias variables y derivadas parciales, con el objetivo de reforzar los conceptos vistos en el curso y apoyar el aprendizaje de los
construction of ellipse and scales
Conic sections such as ellipses, parabolas, and hyperbolas are formed by cutting a cone with planes.
An ellipse is defined as the locus of points where the sum of distances to two fixed foci is a constant equal to the major axis length. A parabola occurs when the cutting plane is parallel to the axis and side of the cone. For a hyperbola, the cutting plane is neither parallel to the axis nor side of the cone.
The ratio of distances from a point on the conic section to the fixed point and fixed line is called the eccentricity. Eccentricity is less than 1 for ellipses, 1 for parabolas, and greater than 1 for
Elasticity problem formulation Att 6582
This document summarizes the formulation of elasticity problems. It discusses the field equations, boundary conditions, and general solution strategies for elasticity problems. The fundamental problem can be formulated using either a displacement formulation or stress formulation. General solution strategies include direct, inverse, and semi-inverse methods. Mathematical methods for solving problems include analytical, approximate, and numerical techniques.
Finite difference equation
This document discusses heat transfer through conduction and various methods for solving the heat equation using finite difference approximations. It introduces the heat equation in Cartesian, cylindrical and spherical coordinates. It discusses boundary conditions and describes setting up a nodal network to discretize the domain. It then presents the finite difference form of the heat equation and describes different cases for nodal finite difference equations, including for interior nodes, nodes at corners or surfaces with convection, and nodes at surfaces with uniform heat flux. It discusses solving the finite difference equations using matrix inversion, Gauss-Seidel iteration, and provides examples.
FINITE DIFFERENCE MODELLING FOR HEAT TRANSFER PROBLEMS
This report provides a practical overview of numerical solutions to the heat equation using the finite difference method (FDM). The forward time, centered space (FTCS), the backward time, centered space (BTCS), and Crank-Nicolson schemes are developed, and applied to a simple problem in1volving the one-dimensional heat equation. Complete, working Matlab and FORTRAN codes for each program are presented. The results of running the codes on finer (one-dimensional) meshes, and with smaller time steps are demonstrated. These sample calculations show that the schemes realize theoretical predictions of how their truncation errors depend on mesh spacing and time step. The Matlab codes are straightforward and allow us to see the differences in implementation between explicit method (FTCS) and implicit methods (BTCS). The codes also allow us to experiment with the stability limit of the FTCS scheme.
Recommended
Engineering Mechanice Lecture 04
1) The document discusses force-couple systems and how a single force can be replaced by an equivalent force-couple system. It explains that a force produces both translational and rotational effects, while a couple only produces rotational effects.
2) It provides an example of replacing a force F acting at point A with two equal and opposite forces F and -F acting along parallel lines at point B, which form a couple with moment Fd. This force-couple system is equivalent to the original single force.
3) The concept of a force-couple equivalent enables the transfer of a force to another location outside its line of action, which has many applications in mechanics.
6161103 8.4 frictional forces on screws
Screws are commonly used as fasteners to transmit power or motion between machine parts. A screw can be thought of as an inclined plane wrapped around a cylinder. When a screw is rotated, the nut moves along the inclined plane of the screw thread. The distance the nut moves in one revolution is called the lead of the screw. Large axial loads on a screw generate significant frictional forces on the threads. The moment required to turn a screw under an axial load depends on the frictional forces and can be calculated using force and moment equilibrium equations. A self-locking screw will remain locked in place through frictional forces alone when the applied moment is removed.
Mechanics of Materials 8th Edition Hibbeler Solutions Manual
Full download http://alibabadownload.com/product/mechanics-of-materials-8th-edition-hibbeler-solutions-manual/
Mechanics of Materials 8th Edition Hibbeler Solutions Manual
57848046 metodos-operativos-de-calculo-vectorial-fausto-cervantes
Este documento es un libro sobre métodos operativos de cálculo vectorial escrito por Fausto Cervantes Ortiz para estudiantes de ingeniería de la Universidad Autónoma de la Ciudad de México (UACM). El libro contiene introducciones y explicaciones detalladas sobre temas como vectores, rectas, planos, superficies de segundo orden, funciones con valores vectoriales, funciones de varias variables y derivadas parciales, con el objetivo de reforzar los conceptos vistos en el curso y apoyar el aprendizaje de los
construction of ellipse and scales
Conic sections such as ellipses, parabolas, and hyperbolas are formed by cutting a cone with planes.
An ellipse is defined as the locus of points where the sum of distances to two fixed foci is a constant equal to the major axis length. A parabola occurs when the cutting plane is parallel to the axis and side of the cone. For a hyperbola, the cutting plane is neither parallel to the axis nor side of the cone.
The ratio of distances from a point on the conic section to the fixed point and fixed line is called the eccentricity. Eccentricity is less than 1 for ellipses, 1 for parabolas, and greater than 1 for
Elasticity problem formulation Att 6582
This document summarizes the formulation of elasticity problems. It discusses the field equations, boundary conditions, and general solution strategies for elasticity problems. The fundamental problem can be formulated using either a displacement formulation or stress formulation. General solution strategies include direct, inverse, and semi-inverse methods. Mathematical methods for solving problems include analytical, approximate, and numerical techniques.
Finite difference equation
This document discusses heat transfer through conduction and various methods for solving the heat equation using finite difference approximations. It introduces the heat equation in Cartesian, cylindrical and spherical coordinates. It discusses boundary conditions and describes setting up a nodal network to discretize the domain. It then presents the finite difference form of the heat equation and describes different cases for nodal finite difference equations, including for interior nodes, nodes at corners or surfaces with convection, and nodes at surfaces with uniform heat flux. It discusses solving the finite difference equations using matrix inversion, Gauss-Seidel iteration, and provides examples.
FINITE DIFFERENCE MODELLING FOR HEAT TRANSFER PROBLEMS
This report provides a practical overview of numerical solutions to the heat equation using the finite difference method (FDM). The forward time, centered space (FTCS), the backward time, centered space (BTCS), and Crank-Nicolson schemes are developed, and applied to a simple problem in1volving the one-dimensional heat equation. Complete, working Matlab and FORTRAN codes for each program are presented. The results of running the codes on finer (one-dimensional) meshes, and with smaller time steps are demonstrated. These sample calculations show that the schemes realize theoretical predictions of how their truncation errors depend on mesh spacing and time step. The Matlab codes are straightforward and allow us to see the differences in implementation between explicit method (FTCS) and implicit methods (BTCS). The codes also allow us to experiment with the stability limit of the FTCS scheme.
Separata de proyecciones tema i de vi digital
ASA (American Estandar Association) (ISO _ A ) 3er, cuadrante, DIN ( Deustcher Industrie Normen) (ISO _E ) 1er cuadrante
Commercial CO2 Refrigeration Systems - Guide for Subcritical and Transcritica...
This document provides an overview of CO2 refrigeration systems, including:
- CO2 properties such as high operating pressures and a low critical temperature that require different system designs compared to other refrigerants.
- The advantages of CO2 as a natural refrigerant with low global warming potential but some challenges in application and handling due to high pressures.
- Different types of CO2 refrigeration systems including transcritical booster systems, cascade systems, and secondary systems.
- Design considerations for CO2 systems such as pressure, capacity modulation, pipework, materials selection, and heat reclaim potential.
- Installation, commissioning, operation, and maintenance of CO2 refrigeration systems.
The finite volume method for diffusion problems
Matlab code for diffusion problem.
An Introduction to Computational Fluid Dynamics: The Finite Volume Method
Book by H. K. Versteeg and W. Malalasekera
(4.1 (page 119)
Unit 1 plane curves
introduction of engineering graphics ,projection of points,lines,planes,solids,section of solids,development of surfaces,isometric projection,perspective projection
Finite Element Analysis - UNIT-2
- The document discusses one-dimensional finite element analysis.
- It describes the derivation of shape functions for linear one-dimensional elements like a bar element. Shape functions define the variation of displacement within the element.
- The stiffness matrix, which represents the element's resistance to deformation, is also derived for a basic linear bar element. It is shown to be symmetric and its properties are discussed.
- Examples are provided to demonstrate calculating displacements at points within a one-dimensional element using the shape functions.
Unit 1 orthographic
introduction of engineering graphics ,projection of points,lines,planes,solids,section of solids,development of surfaces,isometric projection,perspective projection
Centrifugal Pump Analysis CFD case Study
The Objective of the study is to perform a CFD analysis of a Centrifugal Pump. The geometry for the analysis contains two different parts i.e. volute casing and impeller. The necessity of the work is to follow the recommended procedure for the analysis using turbomachinery module CFX under ANSYS Workbench.
Buckling and tension field beam for aerospace structures
This document provides an introduction to column buckling, including:
- Buckling occurs due to high compressive stresses that cause sudden sideways deflection.
- Boundary conditions affect the critical buckling load, with fixed-fixed columns having the highest load.
- Euler's equation is presented for calculating critical buckling loads of columns with various end conditions.
- Examples are provided to demonstrate calculating critical buckling loads and required cross-sectional sizes.
- Buckling of spar webs in aircraft is discussed, along with the concept of complete tension field action to resist buckling through diagonal tensile stresses.
- Equations are given for calculating stresses in spars designed using complete tension field action.
Tutorial 7: Transpose of matrices and Its properties
In this presentation, first we target to find the transpose of a given matrices Then we study different properties of transpose of matrices. At the end three theorems related to the transpose is also there in.
Tutorial 4 : Properties of Matrices Addition
This document discusses properties of matrix addition and scalar multiplication. It defines the commutative law, associative law, existence of an additive identity and inverse, and cancellation laws for matrix addition. It also defines properties of scalar multiplication. Examples are provided to demonstrate applying these properties to compute sums and differences of matrices and to solve systems of equations involving matrices. The full video lecture on this topic is available at a provided link.
Tutorial 4 : Properties of Matrices Addition
This document discusses the properties of matrices, including properties of matrix addition and scalar multiplication. For matrix addition, it describes the commutation law, associative law, existence of an additive identity and inverse, and cancellation laws. For scalar multiplication, it lists four properties. It also provides three examples calculating matrices and solving systems of equations involving matrices.
Tutorial 3: Matrices-Addition and Subtraction of Matrices
This document is a lecture by Dr. Mehar Chand on the topics of addition and subtraction of matrices. It defines addition of matrices as combining matrices of the same order by adding corresponding elements. Scalar multiplication is defined as multiplying every element of a matrix by a scalar or number. The negative of a matrix is defined as multiplying every element by -1. Difference of matrices is defined as subtracting corresponding elements of matrices of the same order. The document provides definitions and examples for each topic and concludes by providing a link to a full video lecture on the subject.
Tutorial 2: Some examples related to matrices
In this tutorial some examples are presented here, how to establish matrix from the given relation and order of matrix
Tutorial 1 Matrices
The document defines and describes various types of matrices, including square, row, column, diagonal, scalar, identity, null, upper triangular, lower triangular, and triangular matrices. It also defines equality of matrices. The types of matrices are defined based on their structure, with square matrices having the same number of rows and columns, row and column matrices having only one row or column, and triangular matrices having either all elements above or below the diagonal equal to zero.
Tutorial 1: Differential equations: Variable Separable
n this tutorial, we study about Reducible to Variable Separable. If the given equation is not separable then using this method it can reduced to variable separable form then the solution can be obtained by separating the variable and at the end we have to put the value of original variables
Tutorial 1:Basic Mathematics: Matrices
In the present tutorial we study about the definition of matrices and its different types. Square matrix, Rectangular matrix, diagonal matrix, scalar matrix, triangular matrix and equal matrix
Tutorial 10 Properties Associated with Sphere
Orthogonal sphere, condition of orthogonality, angle of intersection of two spheres, condition of touching internally of two spheres, condition of touching two spheres externally
Tutorial 9 Tangency of Line and Sphere
This document discusses the tangency of lines and spheres. It covers the condition for a line to be tangent to a sphere, the locus of points where tangent planes contact the sphere, and properties of diametral planes. Examples are given to find the point where a line touches a sphere and to show that a line satisfies the tangency condition for a given sphere. The full video lecture on this topic is available at the provided link.
Tutorial 1: The sphere
First tutorial on Sphere: In the present tutorial, we discuss about the definition of the sphere, equations of the sphere, equation of sphere in standard form, equations of sphere in central form and equation of sphere in general. How can we find the center and radius of a sphere given in general form
Solution of Differential Equations in Power Series by Employing Frobenius Method
In this tutorial, we discuss about the solution of the differential equations in terms of power series. All the cases associated with this attachment has been discussed
Tutorial 2 Curvilinear Motion: Projectiles
Projectile: It is a body, which is small enough to be
regarded as particle, which is projected in oblique
direction to the direction of gravity.
Trajectory: Path traced by the projectile
Velocity of projectile: It is the velocity with which the
particle was projected
Angle of projection: Angle with horizontal, when the
particle is projected
Range: Distance between the point of projection and
the point where it hits a given plane. If the plane is
horizontal, then range is called horizontal range
Time of flight: Time taken by projectile to complete
the particular range
Tutorial on LATEX: A Computer Program for Typesetting Documents
This document provides a tutorial on LATEX software. It discusses installing LATEX, the layout of LATEX documents including the preamble, title page, sections and environments. It also covers various LATEX commands for formatting text, mathematical expressions, tables, images and more. The tutorial aims to help users learn the basics of creating and formatting documents with LATEX.
More Related Content
What's hot
Separata de proyecciones tema i de vi digital
ASA (American Estandar Association) (ISO _ A ) 3er, cuadrante, DIN ( Deustcher Industrie Normen) (ISO _E ) 1er cuadrante
Commercial CO2 Refrigeration Systems - Guide for Subcritical and Transcritica...
This document provides an overview of CO2 refrigeration systems, including:
- CO2 properties such as high operating pressures and a low critical temperature that require different system designs compared to other refrigerants.
- The advantages of CO2 as a natural refrigerant with low global warming potential but some challenges in application and handling due to high pressures.
- Different types of CO2 refrigeration systems including transcritical booster systems, cascade systems, and secondary systems.
- Design considerations for CO2 systems such as pressure, capacity modulation, pipework, materials selection, and heat reclaim potential.
- Installation, commissioning, operation, and maintenance of CO2 refrigeration systems.
The finite volume method for diffusion problems
Matlab code for diffusion problem.
An Introduction to Computational Fluid Dynamics: The Finite Volume Method
Book by H. K. Versteeg and W. Malalasekera
(4.1 (page 119)
Unit 1 plane curves
introduction of engineering graphics ,projection of points,lines,planes,solids,section of solids,development of surfaces,isometric projection,perspective projection
Finite Element Analysis - UNIT-2
- The document discusses one-dimensional finite element analysis.
- It describes the derivation of shape functions for linear one-dimensional elements like a bar element. Shape functions define the variation of displacement within the element.
- The stiffness matrix, which represents the element's resistance to deformation, is also derived for a basic linear bar element. It is shown to be symmetric and its properties are discussed.
- Examples are provided to demonstrate calculating displacements at points within a one-dimensional element using the shape functions.
Unit 1 orthographic
introduction of engineering graphics ,projection of points,lines,planes,solids,section of solids,development of surfaces,isometric projection,perspective projection
Centrifugal Pump Analysis CFD case Study
The Objective of the study is to perform a CFD analysis of a Centrifugal Pump. The geometry for the analysis contains two different parts i.e. volute casing and impeller. The necessity of the work is to follow the recommended procedure for the analysis using turbomachinery module CFX under ANSYS Workbench.
Buckling and tension field beam for aerospace structures
This document provides an introduction to column buckling, including:
- Buckling occurs due to high compressive stresses that cause sudden sideways deflection.
- Boundary conditions affect the critical buckling load, with fixed-fixed columns having the highest load.
- Euler's equation is presented for calculating critical buckling loads of columns with various end conditions.
- Examples are provided to demonstrate calculating critical buckling loads and required cross-sectional sizes.
- Buckling of spar webs in aircraft is discussed, along with the concept of complete tension field action to resist buckling through diagonal tensile stresses.
- Equations are given for calculating stresses in spars designed using complete tension field action.
What's hot (8)
Commercial CO2 Refrigeration Systems - Guide for Subcritical and Transcritica...
Commercial CO2 Refrigeration Systems - Guide for Subcritical and Transcritica...
Buckling and tension field beam for aerospace structures
Buckling and tension field beam for aerospace structures
More from Dr. Mehar Chand
Tutorial 7: Transpose of matrices and Its properties
In this presentation, first we target to find the transpose of a given matrices Then we study different properties of transpose of matrices. At the end three theorems related to the transpose is also there in.
Tutorial 4 : Properties of Matrices Addition
This document discusses properties of matrix addition and scalar multiplication. It defines the commutative law, associative law, existence of an additive identity and inverse, and cancellation laws for matrix addition. It also defines properties of scalar multiplication. Examples are provided to demonstrate applying these properties to compute sums and differences of matrices and to solve systems of equations involving matrices. The full video lecture on this topic is available at a provided link.
Tutorial 4 : Properties of Matrices Addition
This document discusses the properties of matrices, including properties of matrix addition and scalar multiplication. For matrix addition, it describes the commutation law, associative law, existence of an additive identity and inverse, and cancellation laws. For scalar multiplication, it lists four properties. It also provides three examples calculating matrices and solving systems of equations involving matrices.
Tutorial 3: Matrices-Addition and Subtraction of Matrices
This document is a lecture by Dr. Mehar Chand on the topics of addition and subtraction of matrices. It defines addition of matrices as combining matrices of the same order by adding corresponding elements. Scalar multiplication is defined as multiplying every element of a matrix by a scalar or number. The negative of a matrix is defined as multiplying every element by -1. Difference of matrices is defined as subtracting corresponding elements of matrices of the same order. The document provides definitions and examples for each topic and concludes by providing a link to a full video lecture on the subject.
Tutorial 2: Some examples related to matrices
In this tutorial some examples are presented here, how to establish matrix from the given relation and order of matrix
Tutorial 1 Matrices
The document defines and describes various types of matrices, including square, row, column, diagonal, scalar, identity, null, upper triangular, lower triangular, and triangular matrices. It also defines equality of matrices. The types of matrices are defined based on their structure, with square matrices having the same number of rows and columns, row and column matrices having only one row or column, and triangular matrices having either all elements above or below the diagonal equal to zero.
Tutorial 1: Differential equations: Variable Separable
n this tutorial, we study about Reducible to Variable Separable. If the given equation is not separable then using this method it can reduced to variable separable form then the solution can be obtained by separating the variable and at the end we have to put the value of original variables
Tutorial 1:Basic Mathematics: Matrices
In the present tutorial we study about the definition of matrices and its different types. Square matrix, Rectangular matrix, diagonal matrix, scalar matrix, triangular matrix and equal matrix
Tutorial 10 Properties Associated with Sphere
Orthogonal sphere, condition of orthogonality, angle of intersection of two spheres, condition of touching internally of two spheres, condition of touching two spheres externally
Tutorial 9 Tangency of Line and Sphere
This document discusses the tangency of lines and spheres. It covers the condition for a line to be tangent to a sphere, the locus of points where tangent planes contact the sphere, and properties of diametral planes. Examples are given to find the point where a line touches a sphere and to show that a line satisfies the tangency condition for a given sphere. The full video lecture on this topic is available at the provided link.
Tutorial 1: The sphere
First tutorial on Sphere: In the present tutorial, we discuss about the definition of the sphere, equations of the sphere, equation of sphere in standard form, equations of sphere in central form and equation of sphere in general. How can we find the center and radius of a sphere given in general form
Solution of Differential Equations in Power Series by Employing Frobenius Method
In this tutorial, we discuss about the solution of the differential equations in terms of power series. All the cases associated with this attachment has been discussed
Tutorial 2 Curvilinear Motion: Projectiles
Projectile: It is a body, which is small enough to be
regarded as particle, which is projected in oblique
direction to the direction of gravity.
Trajectory: Path traced by the projectile
Velocity of projectile: It is the velocity with which the
particle was projected
Angle of projection: Angle with horizontal, when the
particle is projected
Range: Distance between the point of projection and
the point where it hits a given plane. If the plane is
horizontal, then range is called horizontal range
Time of flight: Time taken by projectile to complete
the particular range
Tutorial on LATEX: A Computer Program for Typesetting Documents
This document provides a tutorial on LATEX software. It discusses installing LATEX, the layout of LATEX documents including the preamble, title page, sections and environments. It also covers various LATEX commands for formatting text, mathematical expressions, tables, images and more. The tutorial aims to help users learn the basics of creating and formatting documents with LATEX.
More from Dr. Mehar Chand (14)
Tutorial 7: Transpose of matrices and Its properties
Tutorial 7: Transpose of matrices and Its properties
Tutorial 3: Matrices-Addition and Subtraction of Matrices
Tutorial 3: Matrices-Addition and Subtraction of Matrices
Tutorial 1: Differential equations: Variable Separable
Tutorial 1: Differential equations: Variable Separable
Solution of Differential Equations in Power Series by Employing Frobenius Method
Solution of Differential Equations in Power Series by Employing Frobenius Method
Tutorial on LATEX: A Computer Program for Typesetting Documents
Tutorial on LATEX: A Computer Program for Typesetting Documents
Recently uploaded
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaWhat is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Recently uploaded (20)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Tutorial 2: Differential equations: Reducible to Variable Separable
- 1. Differential equations: Reducible to Variable Separable Dr. Mehar Chand Reducible Examples Video Tutorial-2: Ordinary Differential Equation Differential equations: Reducible to Variable Separable Dr. Mehar Chand Department of Mathematics Baba Farid College, Bathinda-151001 April 21, 2020 Dr. Mehar Chand Differential equations: Reducible to Variable Separable
- 2. Differential equations: Reducible to Variable Separable Dr. Mehar Chand Reducible Examples Video Contents 1 Equations Reducible to Variable Separable 2 Examples 3 Full video Lecture Dr. Mehar Chand Differential equations: Reducible to Variable Separable
- 3. Differential equations: Reducible to Variable Separable Dr. Mehar Chand Reducible Examples Video Reducible to Variable Separable Art. (Equations Reducible to Variable Separable) If dy dx = f (ax + by + c) then to reduce in variable separable equation: 1 put ax + by + c = t 2 Separate the variables and integrate 3 At the end put t = ax + by + c in the solution of the equation Dr. Mehar Chand Differential equations: Reducible to Variable Separable
- 4. Differential equations: Reducible to Variable Separable Dr. Mehar Chand Reducible Examples Video Examples Example (Examples associated with variable separable) Ex-1 Solve dx dy = (4x + y + 1)2 Ex-2 Solve dx dy = cos(x + y) + sin(x + y) − 1 Dr. Mehar Chand Differential equations: Reducible to Variable Separable
- 5. Differential equations: Reducible to Variable Separable Dr. Mehar Chand Reducible Examples Video Full video Lecture To see full video lecture visit the below link https://youtu.be/IJoEQW8czKc Dr. Mehar Chand Differential equations: Reducible to Variable Separable
- 6. Differential equations: Reducible to Variable Separable Dr. Mehar Chand Reducible Examples Video Thank you Dr. Mehar Chand Differential equations: Reducible to Variable Separable