TSAOC Products & Services Rev.02
•
0 likes•108 views
TSA Oilfield Chemical Sdn Bhd provides a wide range of chemicals and materials for the oil and gas industry. They offer products across several divisions including weighing agents, fluid loss reducers, production chemicals, workover and completion chemicals, gas treatment chemicals, cleaning agents, biocides, oxygen scavengers, polymers, corrosion inhibitors, silica dispersants, and ferrous and non-ferrous materials. They are located in Balakong, Selangor, Malaysia and provide products and services to support oil and gas operations.
Report
Share
Report
Share
Download to read offline
Recommended
Fats, oils and detergents
FATS AND OILS- Fats and oils are triglycerides(triesters).They are made from glycerol and fatty acids.Fats are solids at room temperature whereas oils are liquids.Fatty acids present in fats and oils can be saturated or unsaturated.Fats and oils store energy and help to insulate the body, cushion and protect organs.
SYNTHETIC DETERGENTS- Synthetic detergents or soapless soaps are synthetic substances that are being increasingly employed as cleansing agents these days.
Fats and oil 3rd sem b pharmacy
Fats and oils are esters of glycerol with long-chain fatty acids. They are mainly stored as energy reserves in plant seeds and animal tissues. Key properties include hydrolysis, hydrogenation, and saponification. Hydrolysis breaks fats down into glycerol and fatty acids. Hydrogenation adds hydrogen to unsaturated oils to make them more saturated and solid. Saponification uses alkalis to convert fats into soap and glycerol. Rancidity occurs when oils oxidize and develop foul smells. Various analytical methods determine properties like iodine value and saponification value to identify and check purity of oils.
Lipid
Lipids are a group of fat-like substances that are insoluble in water but soluble in organic compounds. They include true fats, lipids, sterols, and hydrocarbons. Lipids are classified based on their solubility into simple lipids like fats and oils, compound lipids containing other groups, and derived lipids formed by hydrolysis. Their physical state determines how they behave in staining. Hydrophilic lipids are water-miscible while hydrophobic lipids are not. Special fixation and sectioning are required to demonstrate lipids histochemically. Stains like Oil Red O and Sudan dyes are used to identify lipids in tissues and smears. The distribution and accumulation of lipids are diagnostically important in several body systems and
FATS AND OILS
Properties of fats and oils/Organic chemistry 2/Neet preparation/ Reactions of fats and oil/Qualitative analysis of fats and oils
Also see videos:
Properties of fats and oils
https://youtu.be/ux09yaPPPHw
Qualitative analysis of fats and oils
https://youtu.be/WXO6Ggdjwvo
Hi dear students, in this presentation I had explained the introduction, sources, functions and chemistry of fats and oils. I had covered the chemical reactions of fats and oils too, which includes hydrolysis, hydrogenation, Rancidity and drying of oils.
I had covered acid value, saponification value, iodine value, ester value, acetyl value, Reichert meissl value and polenske value of fats and oils. After watching this presentation it will be be able to answer the following questions,
What are fats and oils?
What are fats and oils?
What are the qualitative analysis tests for fats and oils?
What is fatty acid?
What are saturated and unsaturated fatty acids?
What is the difference between fats and oils?
What is fatty acid?
What is triglyceride?
What are saturated and unsaturated fatty acids?
What are essential fatty acids?
What is omega 3 and omega 6 fatty acids?
How vanaspati ghee is made?
What is acid value?
What is acid number?
What is saponification value?
What is iodine value?
What is ester value?
What is acetyl value?
What is reichert meissl value?
Analysis of lipids
Description about the various analytical parameters like iodine value, saponification value ,acid value.....etc for analysis of lipids
Lipid
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like triglycerides, cholesterol, and various fatty acids are examined in detail. Analytical methods for analyzing lipids, such as acid value, saponification value, iodine number, gas chromatography, and enzymatic assays are also outlined.
Lipid more than sufficient
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like cholesterol are also examined. Analytical methods to study the properties of lipids such as acid value, saponification value, and iodine value are outlined.
Fats and oils
This document discusses oils and fats. It explains that oils are liquid at room temperature due to unsaturated fatty acid chains, while fats are solid due to saturated chains. Key processes mentioned include hydrogenation, which converts unsaturated oils to saturated fats, and hydrolysis, which breaks triglycerides into glycerol and fatty acids. Fatty acid oxidation and lipoproteins that transport fats and cholesterol in the blood are also summarized.
Recommended
Fats, oils and detergents
FATS AND OILS- Fats and oils are triglycerides(triesters).They are made from glycerol and fatty acids.Fats are solids at room temperature whereas oils are liquids.Fatty acids present in fats and oils can be saturated or unsaturated.Fats and oils store energy and help to insulate the body, cushion and protect organs.
SYNTHETIC DETERGENTS- Synthetic detergents or soapless soaps are synthetic substances that are being increasingly employed as cleansing agents these days.
Fats and oil 3rd sem b pharmacy
Fats and oils are esters of glycerol with long-chain fatty acids. They are mainly stored as energy reserves in plant seeds and animal tissues. Key properties include hydrolysis, hydrogenation, and saponification. Hydrolysis breaks fats down into glycerol and fatty acids. Hydrogenation adds hydrogen to unsaturated oils to make them more saturated and solid. Saponification uses alkalis to convert fats into soap and glycerol. Rancidity occurs when oils oxidize and develop foul smells. Various analytical methods determine properties like iodine value and saponification value to identify and check purity of oils.
Lipid
Lipids are a group of fat-like substances that are insoluble in water but soluble in organic compounds. They include true fats, lipids, sterols, and hydrocarbons. Lipids are classified based on their solubility into simple lipids like fats and oils, compound lipids containing other groups, and derived lipids formed by hydrolysis. Their physical state determines how they behave in staining. Hydrophilic lipids are water-miscible while hydrophobic lipids are not. Special fixation and sectioning are required to demonstrate lipids histochemically. Stains like Oil Red O and Sudan dyes are used to identify lipids in tissues and smears. The distribution and accumulation of lipids are diagnostically important in several body systems and
FATS AND OILS
Properties of fats and oils/Organic chemistry 2/Neet preparation/ Reactions of fats and oil/Qualitative analysis of fats and oils
Also see videos:
Properties of fats and oils
https://youtu.be/ux09yaPPPHw
Qualitative analysis of fats and oils
https://youtu.be/WXO6Ggdjwvo
Hi dear students, in this presentation I had explained the introduction, sources, functions and chemistry of fats and oils. I had covered the chemical reactions of fats and oils too, which includes hydrolysis, hydrogenation, Rancidity and drying of oils.
I had covered acid value, saponification value, iodine value, ester value, acetyl value, Reichert meissl value and polenske value of fats and oils. After watching this presentation it will be be able to answer the following questions,
What are fats and oils?
What are fats and oils?
What are the qualitative analysis tests for fats and oils?
What is fatty acid?
What are saturated and unsaturated fatty acids?
What is the difference between fats and oils?
What is fatty acid?
What is triglyceride?
What are saturated and unsaturated fatty acids?
What are essential fatty acids?
What is omega 3 and omega 6 fatty acids?
How vanaspati ghee is made?
What is acid value?
What is acid number?
What is saponification value?
What is iodine value?
What is ester value?
What is acetyl value?
What is reichert meissl value?
Analysis of lipids
Description about the various analytical parameters like iodine value, saponification value ,acid value.....etc for analysis of lipids
Lipid
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like triglycerides, cholesterol, and various fatty acids are examined in detail. Analytical methods for analyzing lipids, such as acid value, saponification value, iodine number, gas chromatography, and enzymatic assays are also outlined.
Lipid more than sufficient
This document summarizes the key characteristics and types of lipids. Lipids are insoluble in water but soluble in non-polar solvents. The main types of lipids discussed include fatty acids, neutral fats and oils, waxes, phospholipids, sterols, and fat-soluble vitamins. Specific lipids like cholesterol are also examined. Analytical methods to study the properties of lipids such as acid value, saponification value, and iodine value are outlined.
Fats and oils
This document discusses oils and fats. It explains that oils are liquid at room temperature due to unsaturated fatty acid chains, while fats are solid due to saturated chains. Key processes mentioned include hydrogenation, which converts unsaturated oils to saturated fats, and hydrolysis, which breaks triglycerides into glycerol and fatty acids. Fatty acid oxidation and lipoproteins that transport fats and cholesterol in the blood are also summarized.
Chemical properties of lipids
The document discusses various chemical properties of lipids including iodine value and peroxide value. Iodine value measures the degree of unsaturation in oils and fats, with higher values indicating more double bonds. It is determined by reacting lipids with iodine and titrating excess iodine. Peroxide value measures peroxide content as a sign of oxidation, determined by titrating peroxides with thiosulfate. The document also summarizes common iodine and peroxide values of various oils and fats, and discusses factors that influence lipid oxidation. A research study is summarized that examined effects of blending different oils on storage stability and sensory properties of an extruded snack.
Lipids
This document discusses lipids such as fatty acids, fats, and oils. It describes the different types of lipids including those with and without fatty acids. Fatty acids are long-chain carboxylic acids that can be saturated or unsaturated. Fats and oils are formed from glycerol and fatty acids and are known as triglycerides. Triglycerides can undergo hydrogenation to convert double bonds to single bonds or hydrolysis to split into glycerol and fatty acids. Saponification uses a strong base to split triglycerides into glycerol and soap.
Analysis of oils and fats
The document provides information on various analytical methods used to analyze oils and fats. It discusses determination of saponification value, acid value, ester value, iodine value, and peroxide value. Specific methods are described for determining saponification value and acid value which involve titrating the oil sample against a standard solution. Iodine value is a measure of unsaturation and different iodine methods are outlined including Wijis method using iodine monochloride and Hanus method using iodine monobromide. Reagents and calculations are also defined for various analytical techniques.
Fat analysis
The document discusses various methods for analyzing lipids in foods. It describes the properties of lipids and how they are classified. Several common extraction and analytical techniques are covered, including solvent extraction methods like Soxhlet extraction, and nonsolvent wet methods like the Babcock method for analyzing milk fat. Accurate lipid analysis is important for nutritional labeling and quality control of food products.
Qualitative and quantitative tests for lipids
Lipids can be tested qualitatively through solubility, spotting, acrolein, saponification, Liebermann-Burchard, and Salkowski tests. The solubility test uses organic solvents to test solubility. The spotting test examines greasiness. Acrolein detects glycerol. Saponification produces soap through hydrolysis. Liebermann-Burchard identifies sterols like cholesterol by color change. Salkowski uses sulfuric acid to detect cholesterol through layer color changes. These tests characterize lipids by properties like solubility, structure, and chemical reactions.
Activity 5 a biochem report
1) The document describes an experiment to test the properties of lipids using various solvents and coconut oil.
2) The results show that coconut oil is soluble in nonpolar solvents like chloroform and ether, but not polar solvents like water or dilute acid due to its nonpolar nature.
3) Additional tests are described to observe the evaporation rates of different oils and their reactions to heat and chemicals.
Fatty alcohol
Fatty alcohols are derived from vegetable oils like coconut and palm kernel oils. They are produced through several routes including converting the oils to fatty acids or methyl esters, then hydrogenating and fractionating the results to yield fatty alcohols. Fatty alcohols have various uses as surfactants in personal care products and detergents due to their emulsifying properties. They are produced at over 1.5 million tonnes annually.
CH-04-Module-1-Fats, Oils and Detergents
The document discusses fats, oils, detergents and their analysis. It begins by defining fats and oils as glycerol esters of fatty acids. It describes the different types of fats and oils that occur in nature, including vegetable oils like olive oil and palm oil, and animal oils like whale oil and lard oil. It then discusses the manufacture of soybean oil using solvent extraction. The document concludes by explaining the analysis of fats and oils using tests like acid value, saponification value and iodine value. It also describes the different types of detergents like sodium alkyl sulfates and their cleansing action.
Lipids
Classification, Determination of adulterants in fat & oils, Refining procedure, General method of analysis of lipids
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...SAJJAD KHUDHUR ABBAS
OBJECTIVES
To produce 60,000 MTPA of methyl esters from RBD palm kernel oil.
To achieve the production of methyl esters by using homogeneous base-catalyzed transesterification method with sodium methoxide (NaOCH3) as catalyst.
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...IndiaMART InterMESH Limited
Started to create milestones, we, SPEC Engineers & Consultants Pvt. Ltd marked our presence in the year 1994 and operate in the manufacturing/servicing of Vegetable Oil Plants since 21 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Vegetable Oil Plants, Vegetable Oil Plants, Oleo Chemical Industry Vegetable Oil Plants, Industrial Vegetable Oil Plants, Batch Neutralizing and Bleaching Machines, Continuous Bleaching Oil Machinery, Continuous Physical Refining Machines, Continuous Chemical Refining Machines, Hydrogenation Plants has deepened our roots in the market. We, SPEC Engineers & Consultants Pvt. Ltd breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.Edible oil adulterations
This document discusses techniques for detecting adulteration in edible oils. It provides background on edible oils, including their properties, production levels globally, and health benefits. It then discusses various adulteration issues in India and describes analytical techniques like gas chromatography, infrared spectroscopy, nuclear magnetic resonance, and polymerase chain reaction that can be used to detect adulteration. The document concludes with case studies demonstrating how techniques like Fourier-transform infrared spectroscopy can effectively detect adulteration at low levels.
Kod e yang halal dan haram
This document provides a list of food additives categorized by their E-number, name, function and ruling on whether they are halal (permissible), haram (prohibited), or mushbooh (uncertain) according to Islamic law. Some additives are noted as having possible health issues like allergic reactions or being genetically modified. The additives fall under categories of colourings, preservatives, antioxidants, emulsifiers, thickeners, stabilizers and other functions. The ruling (halal, haram, mushbooh) is given for each additive.
Fatty alcohols
My another assignment discussing on Fatty Alcohols.
As usual, any corrections will be gladly accepted
Lipids (Part-1) || Food Analysis || Pharmaceutical Analysis Department || M.P...
Hello everyone,
Today we discuss about Lipids (part-1) in Food Analysis subject in M.pharmacy(Pharmaceutical Analysis Department)...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...SAJJAD KHUDHUR ABBAS
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL OIL
Micro-emulsion
Process of reducing the viscosity of vegetable oil by the means of solvent (methanol, ethanol as well as normal butanol).Adulteration in fats
This document summarizes a seminar on adulteration in fats and oils, including methods to measure spoilage. It discusses common adulterants like sesame oil, cottonseed oil, and karanja oil that are added to expensive oils to increase profits. Analytical parameters for testing oils like iodine value, saponification value, and acid value are explained. Methods for detecting rancidity in oils like peroxide value testing, Kries test, and UV absorption are also outlined. The seminar was presented to provide an overview of oil adulteration issues and techniques for identifying adulterated or spoiled oils.
Fatty acid clusters (Unit 5 a)
The document discusses the characteristics and classification of fatty acids. It notes that fatty acids are long chain carboxylic acids that can be saturated or unsaturated. Saturated fatty acids do not contain any double bonds between carbon atoms in the chain. Common saturated fatty acids include palmitic acid, stearic acid, and myristic acid. Physical properties like melting point increase with greater chain length for saturated fatty acids. The document provides details on different types of fatty acids like short chain, medium chain, and long chain fatty acids as well as monounsaturated and polyunsaturated fatty acids.
Presentation on adulteration in fats and oils manoj
This document summarizes a seminar on adulteration in fats and oils, including methods to measure spoilage. It discusses common adulterants like sesame oil, cottonseed oil, and karanja oil that are added to expensive oils to increase profits. Analytical parameters for testing oils like iodine value, saponification value, and acid value are explained. Methods for detecting rancidity in oils like peroxide value testing, Kries test, and UV absorption are also outlined. The seminar was presented to provide an overview of oil adulteration issues and analytical techniques used for detection and measuring spoilage.
A nalysis of fat and oil
This document provides a manual for analyzing oils and fats. It begins by describing oils and fats as important parts of the human diet and food products. It then discusses the types of oils and fats, including standards for 24 vegetable oils and animal fats such as butter and lard. The document provides procedures for preparing test samples of both liquid and solid oils and fats. It outlines several methods for analyzing the properties of oils and fats, including determining moisture content, specific gravity, refractive index, flash point, color, melting point, saponification value, acid value, iodine value, and fatty acid composition.
www.CCM Energy.info Commercial professional present
Visit http://yourenergybiz.net/bepaidby for my special MLM leaders program for team leaders and each member to their team. Or call me 404-919-7545
Pauls Opportunity Presentation
The document promotes a fuel additive product called Syntek Engine Boost 2.0, summarizing its benefits as prolonging engine life, reducing emissions, and increasing fuel efficiency. It encourages readers to become distributors by highlighting the convenient and cost-effective business opportunity, which includes benefits like team commissions, check matching bonuses, and an infinity fast start bonus. The summary concludes by outlining the basic steps to get started as a distributor, including enrolling, activating an auto-ship, and plugging into the training system.
More Related Content
What's hot
Chemical properties of lipids
The document discusses various chemical properties of lipids including iodine value and peroxide value. Iodine value measures the degree of unsaturation in oils and fats, with higher values indicating more double bonds. It is determined by reacting lipids with iodine and titrating excess iodine. Peroxide value measures peroxide content as a sign of oxidation, determined by titrating peroxides with thiosulfate. The document also summarizes common iodine and peroxide values of various oils and fats, and discusses factors that influence lipid oxidation. A research study is summarized that examined effects of blending different oils on storage stability and sensory properties of an extruded snack.
Lipids
This document discusses lipids such as fatty acids, fats, and oils. It describes the different types of lipids including those with and without fatty acids. Fatty acids are long-chain carboxylic acids that can be saturated or unsaturated. Fats and oils are formed from glycerol and fatty acids and are known as triglycerides. Triglycerides can undergo hydrogenation to convert double bonds to single bonds or hydrolysis to split into glycerol and fatty acids. Saponification uses a strong base to split triglycerides into glycerol and soap.
Analysis of oils and fats
The document provides information on various analytical methods used to analyze oils and fats. It discusses determination of saponification value, acid value, ester value, iodine value, and peroxide value. Specific methods are described for determining saponification value and acid value which involve titrating the oil sample against a standard solution. Iodine value is a measure of unsaturation and different iodine methods are outlined including Wijis method using iodine monochloride and Hanus method using iodine monobromide. Reagents and calculations are also defined for various analytical techniques.
Fat analysis
The document discusses various methods for analyzing lipids in foods. It describes the properties of lipids and how they are classified. Several common extraction and analytical techniques are covered, including solvent extraction methods like Soxhlet extraction, and nonsolvent wet methods like the Babcock method for analyzing milk fat. Accurate lipid analysis is important for nutritional labeling and quality control of food products.
Qualitative and quantitative tests for lipids
Lipids can be tested qualitatively through solubility, spotting, acrolein, saponification, Liebermann-Burchard, and Salkowski tests. The solubility test uses organic solvents to test solubility. The spotting test examines greasiness. Acrolein detects glycerol. Saponification produces soap through hydrolysis. Liebermann-Burchard identifies sterols like cholesterol by color change. Salkowski uses sulfuric acid to detect cholesterol through layer color changes. These tests characterize lipids by properties like solubility, structure, and chemical reactions.
Activity 5 a biochem report
1) The document describes an experiment to test the properties of lipids using various solvents and coconut oil.
2) The results show that coconut oil is soluble in nonpolar solvents like chloroform and ether, but not polar solvents like water or dilute acid due to its nonpolar nature.
3) Additional tests are described to observe the evaporation rates of different oils and their reactions to heat and chemicals.
Fatty alcohol
Fatty alcohols are derived from vegetable oils like coconut and palm kernel oils. They are produced through several routes including converting the oils to fatty acids or methyl esters, then hydrogenating and fractionating the results to yield fatty alcohols. Fatty alcohols have various uses as surfactants in personal care products and detergents due to their emulsifying properties. They are produced at over 1.5 million tonnes annually.
CH-04-Module-1-Fats, Oils and Detergents
The document discusses fats, oils, detergents and their analysis. It begins by defining fats and oils as glycerol esters of fatty acids. It describes the different types of fats and oils that occur in nature, including vegetable oils like olive oil and palm oil, and animal oils like whale oil and lard oil. It then discusses the manufacture of soybean oil using solvent extraction. The document concludes by explaining the analysis of fats and oils using tests like acid value, saponification value and iodine value. It also describes the different types of detergents like sodium alkyl sulfates and their cleansing action.
Lipids
Classification, Determination of adulterants in fat & oils, Refining procedure, General method of analysis of lipids
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...SAJJAD KHUDHUR ABBAS
OBJECTIVES
To produce 60,000 MTPA of methyl esters from RBD palm kernel oil.
To achieve the production of methyl esters by using homogeneous base-catalyzed transesterification method with sodium methoxide (NaOCH3) as catalyst.
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...IndiaMART InterMESH Limited
Started to create milestones, we, SPEC Engineers & Consultants Pvt. Ltd marked our presence in the year 1994 and operate in the manufacturing/servicing of Vegetable Oil Plants since 21 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Vegetable Oil Plants, Vegetable Oil Plants, Oleo Chemical Industry Vegetable Oil Plants, Industrial Vegetable Oil Plants, Batch Neutralizing and Bleaching Machines, Continuous Bleaching Oil Machinery, Continuous Physical Refining Machines, Continuous Chemical Refining Machines, Hydrogenation Plants has deepened our roots in the market. We, SPEC Engineers & Consultants Pvt. Ltd breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.Edible oil adulterations
This document discusses techniques for detecting adulteration in edible oils. It provides background on edible oils, including their properties, production levels globally, and health benefits. It then discusses various adulteration issues in India and describes analytical techniques like gas chromatography, infrared spectroscopy, nuclear magnetic resonance, and polymerase chain reaction that can be used to detect adulteration. The document concludes with case studies demonstrating how techniques like Fourier-transform infrared spectroscopy can effectively detect adulteration at low levels.
Kod e yang halal dan haram
This document provides a list of food additives categorized by their E-number, name, function and ruling on whether they are halal (permissible), haram (prohibited), or mushbooh (uncertain) according to Islamic law. Some additives are noted as having possible health issues like allergic reactions or being genetically modified. The additives fall under categories of colourings, preservatives, antioxidants, emulsifiers, thickeners, stabilizers and other functions. The ruling (halal, haram, mushbooh) is given for each additive.
Fatty alcohols
My another assignment discussing on Fatty Alcohols.
As usual, any corrections will be gladly accepted
Lipids (Part-1) || Food Analysis || Pharmaceutical Analysis Department || M.P...
Hello everyone,
Today we discuss about Lipids (part-1) in Food Analysis subject in M.pharmacy(Pharmaceutical Analysis Department)...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...SAJJAD KHUDHUR ABBAS
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL OIL
Micro-emulsion
Process of reducing the viscosity of vegetable oil by the means of solvent (methanol, ethanol as well as normal butanol).Adulteration in fats
This document summarizes a seminar on adulteration in fats and oils, including methods to measure spoilage. It discusses common adulterants like sesame oil, cottonseed oil, and karanja oil that are added to expensive oils to increase profits. Analytical parameters for testing oils like iodine value, saponification value, and acid value are explained. Methods for detecting rancidity in oils like peroxide value testing, Kries test, and UV absorption are also outlined. The seminar was presented to provide an overview of oil adulteration issues and techniques for identifying adulterated or spoiled oils.
Fatty acid clusters (Unit 5 a)
The document discusses the characteristics and classification of fatty acids. It notes that fatty acids are long chain carboxylic acids that can be saturated or unsaturated. Saturated fatty acids do not contain any double bonds between carbon atoms in the chain. Common saturated fatty acids include palmitic acid, stearic acid, and myristic acid. Physical properties like melting point increase with greater chain length for saturated fatty acids. The document provides details on different types of fatty acids like short chain, medium chain, and long chain fatty acids as well as monounsaturated and polyunsaturated fatty acids.
Presentation on adulteration in fats and oils manoj
This document summarizes a seminar on adulteration in fats and oils, including methods to measure spoilage. It discusses common adulterants like sesame oil, cottonseed oil, and karanja oil that are added to expensive oils to increase profits. Analytical parameters for testing oils like iodine value, saponification value, and acid value are explained. Methods for detecting rancidity in oils like peroxide value testing, Kries test, and UV absorption are also outlined. The seminar was presented to provide an overview of oil adulteration issues and analytical techniques used for detection and measuring spoilage.
A nalysis of fat and oil
This document provides a manual for analyzing oils and fats. It begins by describing oils and fats as important parts of the human diet and food products. It then discusses the types of oils and fats, including standards for 24 vegetable oils and animal fats such as butter and lard. The document provides procedures for preparing test samples of both liquid and solid oils and fats. It outlines several methods for analyzing the properties of oils and fats, including determining moisture content, specific gravity, refractive index, flash point, color, melting point, saponification value, acid value, iodine value, and fatty acid composition.
What's hot (20)
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD PALM KERNEL ...
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...
Lipids (Part-1) || Food Analysis || Pharmaceutical Analysis Department || M.P...
Lipids (Part-1) || Food Analysis || Pharmaceutical Analysis Department || M.P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Episode 4: PRODUCTION OF 60, 000 MTPA OF OLEOCHEMICAL METHYL ESTER FROM RBD P...
Presentation on adulteration in fats and oils manoj
Presentation on adulteration in fats and oils manoj
Viewers also liked
www.CCM Energy.info Commercial professional present
Visit http://yourenergybiz.net/bepaidby for my special MLM leaders program for team leaders and each member to their team. Or call me 404-919-7545
Pauls Opportunity Presentation
The document promotes a fuel additive product called Syntek Engine Boost 2.0, summarizing its benefits as prolonging engine life, reducing emissions, and increasing fuel efficiency. It encourages readers to become distributors by highlighting the convenient and cost-effective business opportunity, which includes benefits like team commissions, check matching bonuses, and an infinity fast start bonus. The summary concludes by outlining the basic steps to get started as a distributor, including enrolling, activating an auto-ship, and plugging into the training system.
Cfm 2010
The document advertises a fuel treatment product called Xtreme Fuel Treatment (XFT) that claims to provide fuel savings, increase engine life, reduce emissions, and improve performance. It also describes a multi-level marketing compensation plan for selling and distributing XFT that offers bonuses, commissions, and leadership pools. Those interested can purchase starter kits ranging from $89 to $298 to become a distributor.
Info Share about dendrimer applications.
Info about dendrimer application. We are factory of dendrimer, have many new products can be applied in mass production.
The Syntek Global is an opportunity for individuals like you and me to earn h...
For any one desiring financial freedom Syntek Global is for you. If you are interested in a simple and powerful way of generating residual income this is the place for you.
Owc 40 50 Presintation
The document summarizes the OWC 40 and 50 Series oil/water controllers. The controllers are compact, portable, easy to transport and install. They use a unique resonant tube technology to measure electromagnetic energy losses in water-oil emulsions to determine moisture content without being affected by flow rates or pressure. Factory calibration and testing provides high accuracy measurements from 0 to 100% emulsion concentrations across a wide temperature range, making the OWC series a leader in its class.
Staris company overview
PT. Staris Chemicals is Aik Moh’s new branch office based in Jakarta, Indonesia. It is set up jointly by Aik Moh Paints & Chemicals Pte Ltd, and, Mr. Hendri Candra, who has a wealth of experience in chemical trading.
PT. Staris specialises in trading specialty chemicals, especially in the oil and gas, agrochemicals, paint and coating resin, water treatment and textile auxiliary industries, and laboratory chemicals.PT. Staris is endowed with warehousing and logistical capabilities to serve her valuable customers in Jakarta and the region .
Oil Technics Ltd (OTL): Speciality Treatments Brochure: Oil in Water/Water in...
The document describes products from Oil Technics for treating oil contamination and recycling waste oil. It discusses oily water separators that use Bio Tubes containing oil-digesting bacteria to reduce oil discharges. It also describes biological and chemical products for removing oil stains, degreasing, treating emulsions and contaminated soil/gravel, including OT8 bacterial cleaner, Bio Gel, S-Oil Treat, and Road Bio. The company provides solutions for bioremediation of oil spills and industrial oil waste treatment.
Investor Presentation Final 2- October 2016
Conscience Labs provides additive solutions to improve crude oil and fuel quality. Their additives increase API gravity and decrease sulfur content in crude oil, improving fuel performance and reducing emissions. They have had successful testing of their products in laboratories and fields in multiple countries, showing improvements in metrics like API gravity, sulfur reduction, and emissions reductions. Conscience Labs is currently in discussions with potential partners in countries like Ecuador, Jordan, and Canada to implement larger-scale pilots and contracts for their additive solutions.
ef501568b
The document describes the synthesis and application of a novel dendrimer-based demulsifier for treating diesel-in-water emulsions with ultrafine oil droplets. A polyamidoamine (PAMAM) dendrimer demulsifier was synthesized and found to effectively break up emulsions through flocculation and coalescence of oil droplets. Experiments showed the demulsifier performance depended on factors like temperature, concentration, and settling time. Over 90% of oil was removed under optimal conditions compared to less than 2% without treatment. The demulsifier offers potential benefits for industrial waste water treatment.
Archoil ar6200 eu fuel modification complex
This document describes a fuel additive called AR6200-EU. It lists its features as improving combustion, reducing emissions, preventing sludge build-up, lubricating fuel systems, and more. It claims benefits such as increasing fuel economy by 6-10%, improving power and performance, and protecting fuel systems. Test results are presented showing reductions in fuel consumption, emissions, and opacity from engines and generators using the additive. Various railroad and transit companies seeing fuel savings from 5-18% with its use are also listed.
Syntek Business Opportunity
This document introduces an extreme fuel treatment product and a multi-level marketing opportunity to sell the product. It describes the patented fuel treatment product that saves on fuel costs, extends engine life, reduces emissions, and increases performance. It then outlines nine ways for distributors to earn commissions, including through customer sales, sponsoring new distributors, team commissions, and leadership bonuses. Distributors can start with different starter kits ranging from $99 to $598.
Analisa Fluida Reservoir
Dokumen tersebut merangkum hasil percobaan analisis fluida reservoir yang meliputi penentuan kandungan air, kandungan endapan dan air (BS&W), specific gravity, titik kabut, titik beku dan titik tuang menggunakan beberapa metode seperti Dean & Stark, centrifuge, dan pencatatan suhu. Dokumen tersebut juga menjelaskan aplikasi hasil percobaan untuk menentukan jenis minyak dan masalah yang mungkin terjadi pada produksi miny
Hydrolic Fluid purpose & properties (chapter 2)
This document discusses the properties and functions of hydraulic fluids used in machinery. It outlines that hydraulic fluids must effectively transmit power while providing lubrication, sealing, and heat dissipation. The key properties of good hydraulic fluids include good lubricity, ideal viscosity, chemical/thermal stability, compressibility, fire resistance, heat transfer ability, low density/foam resistance, and non-toxicity. It then examines viscosity and viscosity index in depth, as well as other important properties like pour point, lubricating ability, rust/corrosion protection, and the role of additives and inhibitors.
Spe Emulsions By Brendan Graham
This document discusses oil/water emulsions, techniques for measuring and predicting their formation, and issues with current laboratory and field measurement methods. It proposes a new laboratory technique called an emulsion dynamometer that would objectively measure the energy required to form emulsions. This would help determine emulsion formation tendencies and demulsifier effectiveness in a more representative way than current techniques. The document also discusses multiphase flow meters that measure oil and water flow rates but have errors of 10-15% compared to theoretical models, highlighting the need for improved measurement methods.
Lubricants for thermal power plants
This document discusses lubricants used in thermal power plants. It begins by introducing the importance of selecting the proper lubricant and understanding lubrication theory. It then discusses the fundamentals of lubrication in reducing friction and wear. Different types of lubricating oils and their characteristics like viscosity and additives are explained. Common additives are outlined that improve performance by interacting with machine metals. Grease composition and characteristics are also covered. The document concludes by examining lubricant specifications for steam turbines and other thermal power plant equipment.
Viewers also liked (16)
www.CCM Energy.info Commercial professional present
www.CCM Energy.info Commercial professional present
The Syntek Global is an opportunity for individuals like you and me to earn h...
The Syntek Global is an opportunity for individuals like you and me to earn h...
Oil Technics Ltd (OTL): Speciality Treatments Brochure: Oil in Water/Water in...
Oil Technics Ltd (OTL): Speciality Treatments Brochure: Oil in Water/Water in...
Similar to TSAOC Products & Services Rev.02
CLEVER - INDUSTRIAL CHEMICALS MANUFACTURER
Industrial chemicals, pharma industrial fine chemicals, sulphate chemicals, ammonium fine chemicals, powder aluminium chemicals, chloride powder chemicals, pharma chemicals, contract manufacturer of chemicals in vadodara gujarat india
Valudor introduction ppc process performance chemicals division featuring che...
Valudor is expanding its Process Performance Chemicals division to better serve customers' chemical needs. The letter discusses Valudor's capabilities in providing chemicals for various process applications including cleaning, oil field, midstream, refinery, boiler/cooling, marine, wastewater, and agriculture. Valudor looks forward to discussing customers' needs and how it can optimize processes through specialized chemicals and meet expectations for price, performance, and service.
New alliance-dye-chem-private-limited
This document contains information about New Alliance Dye Chem Private Limited, an ISO 9001:2008 certified manufacturer and supplier of sequestering and chelating agents and chemicals. It lists various products offered, including DTPA series, NTA series, PDTA series, phenylhydrazine series, amine halides series, EDTA chemicals, ATMP chemicals, and more. Contact information and details about the company's establishment in 1986 are also provided.
Have a Good Trip? How to Analyze Psychedelics
Entheogens, frequently used interchangeably with hallucinogens and psychedelics, are naturally occurring psychoactive substances. Historically, these substances have been used to induce a change of perception, mood, consciousness, or behavior for the purposes of spiritual development or social enrichment. In addition to these uses, these substances have become strong candidates for alternative medicines for the treatment of psychological disorders. Cannabis, a more common entheogen, has paved the way for decriminalization and legalization of other substances, such as psilocin, psilocybin, MDMA, and LSD to be used for clinical treatments. While these compounds in many places are still classified as Schedule I substances under the Controlled Substances Act, other entheogenic plants with different psychoactive compounds are not, such as Mitragyna speciosa and Amanita muscaria, which already appear on the market in the form of edibles, extracts, or powders. With the lack of standardized methods for these psychoactive targets, and with the rise of legalization and clinical treatment centers, it is important to understand this emerging market from a safety and quality perspective. This session will focus on emerging products, testing targets, sample preparation, method development, and analytical challenges. Attendees of this session will learn technical steps that need to be considered to develop robust, reproducible analytical methods, and a quality assurance program to expand into this new and evolving area of testing.
A. B. Enterprises, Mumbai, Industrial Chemicals
We manufacture, export and supply a diverse range of chemicals, to meet the demands of varied industries. Our product array consists of various Industrial Chemicals, Food Chemicals, Organic Solvents and Rubber Chemicals. such as Solvent And Petrochemicals, Biocides, Soaps & Detergents Chemicals, Adhesives & Gums Chemicals, Minerals And Chemicals, Plating Chemicals, Water Treatment Chemicals, Disinfectant, Glypure 99 Prc. Pure Gr. (Glycolic Acid 99 Prc. Pure Gr.).
Bhakti chemicals-pvt-ltd
We Bhakti Chemicals Pvt. Ltd. are reputed Manufacturer, Exporter, Importer and Supplier of EDTA Series, NTA Series, HEDP Products, Potassium Humate, Chelated Micronutrients, Chelated Micronutrient Mixtures, etc.
WATER TREATMENT INDUSTRIAL CHEMICALS PAT IMPEX LARGEST MANUFACTURER IN VADODA...
MANUFACTURER AND SUPPLIERS OF Water Treatment Chemicals for use in different industry verticals all across the world domestic and international distributors, suppliers as well as water treatment specialists
New Delhi, Vapi, Ankleshwar, Bangalore, Hyderabad, Chennai, Ahmedabad, Kolkata, Surat, Pune Jaipur, Lucknow, Kanpur, Nagpur, Indore, Visakhapatnam, Thane, Bhopal, Pimpri-Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Coimbatore, Agra, Madurai, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivali, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Ranchi, Howrah, Jabalpur, Gwalior, Vijayawada, Jodhpur, Raipur, Kota, Guwahati, Chandigarh, Solapur, Hubballi-Dharwad, Tiruchirappalli, Bareilly, Moradabad, Mysore, Tiruppur, Gurgaon, Aligarh, Jalandhar, Bhubaneswar, Salem, Mira-Bhayandar, Warangal, Thiruvananthapuram, Guntur, Bhiwandi, Saharanpur, Gorakhpur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, Nellore, Bhavnagar, Dehradun, Durgapur, Asansol, Nanded, Kolhapur, Ajmer, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Jammu, Sangli-Miraj & Kupwad, Mangalore, Erode, Belgaum, Ambattur, Tirunelveli, Malegaon, Gaya, Jalgaon, Udaipur, Maheshtala, Davanagere, Kozhikode, Akola, Kurnool, Rajpur Sonarpur, Rajahmundry, Bokaro, South Dumdum, Bellary, Patiala, Gopalpur, Agartala, Bhagalpur, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Tirupati, Rohtak, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Mathura, Kollam, Avadi, Kadapa, Kamarhati, Bilaspur, Shahjahanpur, Satara, Punjab, Bijapur, Rampur, Shivamogga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Kakinada, Nizamabad, Parbhani, Tumkur, Hisar, Baddi, Mumbai. Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Diu, Daman, Union Territories and Capitals, Andaman and Nicobar Islands, Chandigarh, The Government
Lipatick ppt (2)))))
This document discusses the history and formulation of lipsticks. It provides details on key ingredients used in lipsticks like waxes, oils, pigments, and preservatives. Different types of lipsticks are described such as matte, gloss, liquid, and pearlescent formulations. Common brands are compared based on major ingredients and customer reviews. Manufacturing processes and potential defects are also outlined.
Metabolic engineering for oil quality improvement
The most important oilseed crops are Oil palm, Soybeans, Rapeseed and Sunflower,which together account for ≈ 79% of the total production of oils.Oils that are low in palmitic acid and rich in either oleic acid or stearic acid are novel oils. Selective breeding utilizing natural variants or induced mutations has been used to develop a range of improved oils. The vegetable oil is used for different applications as renewable sources of food used for frying, baking, processed foods,Fuel (Biodiesel),medicine and can be used as industrial raw material for preparation of soaps, detergents, paints, lubricants etc.
The recommended ratio of omega6/omega3 fatty acids in the human diet is approximately 2:1 to 6:1 (Simopoulos., 2000; Wijendran and Hayes., 2004) and the much higher ratio of omega 6 fatty acids in the typical Western diet (approximately 20:1) is thought to be a major contributor to cardiovascular disease (Simopoulos., 2000).
For metabolic engineering of oil quality improvement fatty acid composition and enzymes involved are very important so we can reduce expression of endogenous enzymes by adding new enzyme ,overexpressing existing enzyme and by using antisense RNA. It proved that genes for membrane-bound fatty acid-modifying enzymes not only from plants but also from bacterial,animal,yeast have been shown to function in transgenic plants.The enzymes such as Fatty acid synthase ,Thioesterases ,Elongases ,Desaturases ,Stearoyl-ACP desaturase ,Δ12-desaturase, , Δ15-Desaturase ,Acyltransferases and Hydroxylases are important in fatty acid manipulation.Suppression of the oleate D12-desaturase gene (which normally converts 18:1 to 18:2) in soybean, sunflower, cotton and canola has resulted in the production of oils with a high oleic acid content, which have greater oxidative stability and improved performance in high-temperature cooking applications. (Metzger and Bornscheuer., 2006).
A. B. Enterprises, Mumbai, Industrial Chemicals
Manufacturer and exporter of industrial chemicals. We serve chemical, pharma, textile, food and other industries, with wide array of diversified chemicals and paints such as Solvent And Petrochemicals, Biocides, Soaps & Detergents Chemicals, Adhesives & Gums Chemicals, Minerals And Chemicals, Plating Chemicals, Disinfectant
PAT IMPEX INDUSTIRAL CHEMICALS, SOLVENT IN VADODARA GUJARAT INDIA
PAT IMPEX INDUSTIRAL CHEMICALS, SOLVENT IN VADODARA GUJARAT INDIA
New Delhi, Vapi, Ankleshwar, Bangalore, Hyderabad, Chennai, Ahmedabad, Kolkata, Surat, Pune Jaipur, Lucknow, Kanpur, Nagpur, Indore, Visakhapatnam, Thane, Bhopal, Pimpri-Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Coimbatore, Agra, Madurai, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivali, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Ranchi, Howrah, Jabalpur, Gwalior, Vijayawada, Jodhpur, Raipur, Kota, Guwahati, Chandigarh, Solapur, Hubballi-Dharwad, Tiruchirappalli, Bareilly, Moradabad, Mysore, Tiruppur, Gurgaon, Aligarh, Jalandhar, Bhubaneswar, Salem, Mira-Bhayandar, Warangal, Thiruvananthapuram, Guntur, Bhiwandi, Saharanpur, Gorakhpur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, Nellore, Bhavnagar, Dehradun, Durgapur, Asansol, Nanded, Kolhapur, Ajmer, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Jammu, Sangli-Miraj & Kupwad, Mangalore, Erode, Belgaum, Ambattur, Tirunelveli, Malegaon, Gaya, Jalgaon, Udaipur, Maheshtala, Davanagere, Kozhikode, Akola, Kurnool, Rajpur Sonarpur, Rajahmundry, Bokaro, South Dumdum, Bellary, Patiala, Gopalpur, Agartala, Bhagalpur, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Tirupati, Rohtak, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Mathura, Kollam, Avadi, Kadapa, Kamarhati, Bilaspur, Shahjahanpur, Satara, Punjab, Bijapur, Rampur, Shivamogga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Kakinada, Nizamabad, Parbhani, Tumkur, Hisar, Baddi, Mumbai. Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Diu, Daman, Union Territories and Capitals, Andaman and Nicobar Islands, Chandigarh, The Government o
Osmotic pump for colon specific delivery
The document describes different controlled release drug delivery systems and formulations for two drugs: dicyclomine hydrochloride and diclofenac potassium. It provides the ingredients and amounts used for various matrix, reservoir, and osmotic controlled release formulations of each drug along with expected release times. Coating formulations are also described for sustained release purposes.
Pioma chemicals product line - Pharmaceutical Excipients & Oils
USP/NF, EP, BP, JP etc. global pharmacopea compliant superior excipients & oils from renowned principals from across the globe.
PAT IMPEX, INDUSTRIAL CHEMICALS MANUFACTURER SUPPLIERS
INDUSTRIAL CHEMICALS, PHARMACEUTICAL CHEMICALS, IP BP USP CHEMICAL, GENERAL CHEMICALS, CHLOR ALKALI CHEMICALS, CHEMICAL SALTS, MANUFACTURER, SUPPLIERS, EXPORTER IN INDIA, VADODARA, GUJARAT
Alfa Chemistry APIs Brochure
Alfa Chemistry offers a variety of synthetic chemical APIs which can be used in the pharmaceutical preparation. In addition, we offer pre-formulation drug discovery, formulation and process development, custom synthesis, and scale up services. Learn more at https://www.alfa-api.com/.
oleochemical products.pptx
1) The document discusses various oleochemical processes and products derived from oils and fats, including fatty acids, fatty acid derivatives, fatty acid methyl esters, fatty alcohols, fatty amines, and glycerol.
2) Key processes mentioned are hydrolysis, which splits triglycerides into glycerol and fatty acids, and transesterification, which produces fatty acid methyl esters and glycerol from triglycerides.
3) The products have a wide range of applications from petrochemicals and polymers to soaps, detergents, and personal care products.
2014 15 product list
This document lists various chemicals and their specifications. It includes water treatment chemicals, acids, agro chemicals, industrial chemicals, pharmaceutical ingredients, solvents, oilfield chemicals, specialty chemicals, and natural mineral water. The chemicals are available in different packaging sizes and concentrations. Contact information is provided at the top for inquiries.
Brochure Delta
Delta Finochem Pvt. Ltd. is an Indian pharmaceutical company that manufactures active pharmaceutical ingredients (APIs), drug intermediates, and quaternary compounds. It has WHO-GMP and ISO 9001:2008 certification. The company has multiple manufacturing sites in India and focuses on niche products for generic drug companies. It offers APIs, intermediates, and quaternary compounds and has capabilities in various organic reactions. Delta Finochem aims to be a partner of choice for API and intermediate suppliers and to offer quality products through continuous innovation.
E appendices exiv
This document provides a method to determine the acid value of Chinese medicinal materials (CMM) samples to assess rancidity. Rancidity may occur in CMM samples upon storage, especially when high in fatty acids or oils. The acid value is defined as the amount of potassium hydroxide in milligrams needed to neutralize the free acids in 1 gram of a fat or oil. The method involves extracting the fatty oil from CMM samples using n-hexane in a soxhlet extractor. The extracted oil is then titrated with sodium hydroxide using phenolphthalein indicator to determine the acid value based on the amount of sodium hydroxide used. The acid value result is used to check if
How Long Is Your Trip? Analysing the Micros and Heroics of Psychedelics
Psychedelics are a diverse group of drugs that are known for their ability to alter consciousness, perception, mood, and thought. Detecting the presence, quantity and quality of these compounds is crucial to research development and involves various analytical tools such as High Performance Liquid Chromatography (HPLC) with optical or mass detectors, and other instruments types. These analytical tests are performed for a variety of reasons, including product, drug, or safety testing, all of which are subject to regulations and guidelines set by the licensing authorities. Besides the regulations, we face several other challenges with psychedelic analysis, such as the lack of standardized testing methods, difficulties in sample preparation, and analyte stability.
Similar to TSAOC Products & Services Rev.02 (20)
Valudor introduction ppc process performance chemicals division featuring che...
Valudor introduction ppc process performance chemicals division featuring che...
WATER TREATMENT INDUSTRIAL CHEMICALS PAT IMPEX LARGEST MANUFACTURER IN VADODA...
WATER TREATMENT INDUSTRIAL CHEMICALS PAT IMPEX LARGEST MANUFACTURER IN VADODA...
PAT IMPEX INDUSTIRAL CHEMICALS, SOLVENT IN VADODARA GUJARAT INDIA
PAT IMPEX INDUSTIRAL CHEMICALS, SOLVENT IN VADODARA GUJARAT INDIA
Pioma chemicals product line - Pharmaceutical Excipients & Oils
Pioma chemicals product line - Pharmaceutical Excipients & Oils
PAT IMPEX, INDUSTRIAL CHEMICALS MANUFACTURER SUPPLIERS
PAT IMPEX, INDUSTRIAL CHEMICALS MANUFACTURER SUPPLIERS
How Long Is Your Trip? Analysing the Micros and Heroics of Psychedelics
How Long Is Your Trip? Analysing the Micros and Heroics of Psychedelics
TSAOC Products & Services Rev.02
- 1. TSA Oilfield Chemical Sdn Bhd (726698-H) Products & Services
- 3. Our Product Portfolio Overview
- 4. Weighing Agents • API Barite Powder Fluid Loss Reducers and Viscosifier • API Grade Bentonite • Bentonite Extender • Carboxymethyl Cellulose (CMC – HV & LV) • Hydroxy Ethyl Cellulose (HEC powder, EHV) • Polyanionic Cellulose Polymer (PAC – RV & LV) • Xantham Gum (XC) • Dispersible Xanthan Gum (XCD) Production Chemicals • Biocide • Corrosion Inhibitor • Defoamer & Antifoam • Demulsifier • Deoiler • H2S Scavenger • Paraffin Inhibitor • Pour Point Depressant • Scale Inhibitor • Scale Dissolver
- 5. Warkover and Completion Chemicals • Calcium Bromide Powder / Flakes, 97% Min • Calcium Bromide Liquid, 52% & SG 1.7 Min • Calcium Chloride Powder, 94 – 97% • Calcium Chloride Prill, 94 – 97% • Calcium Chloride Flakes, 74 – 77% • Potassium Chloride Powder, 96% Min • Sodium Bromide Powder • Sodium Bromide Liquid, SG 1.5 Min • Zinc Bromide Liquid, SG 2.3 • Sodium Formate Powder, 98% Min • Potassium Formate Powder, 95% Min • Potassium Formate Liquid, SG 1.57 Min Gas Treatment Chemicals • Mono-ethylene Glycol (MEG) • Tri-ethylene Glycol (TEG) Cleaning Agents • Alkaline Degreaser • Bio-degreaser • Tank Cleaning Chemicals
- 6. Phosphonates 2-Phosphonobutane-1,2, 4-tricarboxylic acid (PBTC) Amino tri (methylene phosphonic acid) (ATMP) 1-Hydroxyethylidene- 1,1-diphosphonic acid (HEDP) Hydroxyphosphonpacetic Acid (HPAA) Ethylenediamine tetra (methylene phosphonic acid) (EDTMPA) Polyamino Polyether Methylene Phosphonate (PAPEMP) Diethylenetriamine Penta (Methylene Phosphonic Acid) (DTPMPA) Hexamethylene Diamine Tetra (Methylene Phosphonic Acid)(HMDTMPA.K6) Bis (hezamethylene triamine penta (Methylene Phosphonic Acid) (BHMTPMPA) Biocides Mixture of CMIT and MIT Mixture of CMIT and MIT (Copper Free) 2, 2-Dibromo-3-nitrilo-Propionamide 20% DBNPA solution Bronopol 1- Bromo-3-Chloro-5 5-Dimethylhydantoin Glutaradehyde Tetrakis Hydroxymethyl hosphonium Sulphate
- 7. Oxygen Scavenger Carbohydrazide N, N-Diethyly Hydroxyl-Amine Polymer Polymaleic anhydride Polymaleic acid Maleic acid and acrylic acid copolymer Polyacrylate Phosphino carboxylic acid Poly methyl acrylic acid Polyacylate Copolymer of AA and AMPS Terpolymer of AA. AMPS and a third non-ion monomer) AA and AHPS copolymer Polyepoxysuccinnic acid Silica Dispersant Yellow Metal Corrosion Inhibitor Methybenzotriazole Methybenzotriazole sodium salt 1,2,3 Benzotriazole 1,2,3 Benzotriazole sodium salt
- 12. Material Division Ferrous Types • Steel Plate • Steel Sheets • Structural Steel • Pipes and Tubes • Round Bar • Rod Materials • Fittings • Fabricated Products Materials • Alloys • Carbon Steel • Duplex Stainless Steel • Nickel-Alloys • Stainless Steel • Titanium • Zirconium
- 13. Material Division Non Ferrous – PE Pipe & Fitting
- 14. Material Division Non Ferrous – GRE Pipe & Fitting
- 15. Our Services
- 16. Our Services
- 17. Our Services
- 18. Our Services Pressurized Habitat System
- 19. Contact Us Lot 3998, Jalan 6/2A, Taman Industri Selesa Jaya, 43300 Balakong, Selangor Darul Ehsan, Malaysia. Tel : +60 3 8962 6888 Fax : +60 3 8962 2933