1. The document discusses techniques for drafting and blocking patterns used to create garments. It emphasizes the importance of practicing pattern making with different measurements before cutting fabric. 2. Key steps in pattern drafting include getting body measurements, constructing patterns for each measurement, comparing patterns, improving errors, and practicing until mastering the drafting process. 3. When drafting patterns, it is important to follow numbered instructions sequentially, refer to illustrations, account for fractional measurements, and ensure accuracy of body measurements translated to patterns.

1. Techniques in Drafting
and Blocking of patterns

2. “Pattern
is the template from
which the parts of
a garment are traced
onto fabric before
being cut out and
assembled.

3. MEASURING AND
PATTERN DRAFTING

4. Place your screenshot here
1. Get the
measurement of
different
persons.

5. Place your screenshot here
2. Construct the
pattern for each
measurement.

6. Place your screenshot here
3. Compare
the patterns
drafted.

7. Place your screenshot here
4. Improve
errors.

8. Place your screenshot here
5. Continue
drafting pattern
exercises until you
have mastered the
steps.

9. Place your screenshot here
6. Never attempt to
cut the fabric until
you have practiced
making patterns with
different
measurements.

10. Things to remember in
drafting pattern.
1

11. 1. In drafting the
pattern, always
start drawing
lines from A to Z
or 1 to 10.

12. 2. In every stage
of work always
refer to the
illustration to
ensure the right
placement of the
alphabets or
numbers.

13. 3. There are
portions in some
instruction. It
means fractional
unit of the L-
square is used.

14. 4. Take utmost
care in making
the shape of the
neck, the sleeve
cap, the armhole,
the waistline and
the back crotch to
be sure of a good
fitting.

15. 5. Be accurate in
translating the
actual body
measurement in
pattern making.

16. Techniques
in cutting
final
pattern

17. Place your screenshot here
1. follow what it says on how to
lay out the pattern pieces.

18. Place your screenshot here
2. Make sure that the pattern is
facing the right side of the fabric.

19. Place your screenshot here
3. Do not forget to put allowance.

20. Place your screenshot here
4. Pin the rest of the pattern onto
your fabric–it is straight. Just stick
in as many pins as you need to keep
it flat when you cut it.

21. Place your screenshot here
5. Double check the place of pattern
to the fabric.

22. Place your screenshot here
6. Avoid errors or mistake when
cutting the fabric.