Submarine cables: Indian Perspective
•
0 likes•239 views
Submarine telecommunication cables have a minimum design life of 25 years and account for the vast majority of international internet traffic. Major tech companies are investing in new high-capacity cables to meet rising bandwidth demand. Cables can carry over 200 terabits per second and are manufactured and installed by companies like Alcatel Submarine Networks and NEC. They require periodic maintenance and upgrading through the deployment of repeater stations along the cable routes.
Report
Share
Report
Share
Download to read offline
Recommended
Submarine cable
Submarine cables are used to carry telecommunication signals across oceans by being laid along the seabed. They connect land-based stations between countries and continents. Modern cables have optical fibers at their core that can transmit terabits of data per second. Bangladesh is currently connected to the global cable infrastructure via the SEA-ME-WE-4 cable, but will soon connect to the new SEA-ME-WE-5 cable to gain additional bandwidth capacity. Submarine cables are preferable to satellites for international telecommunications due to their much higher data transmission capacity and lower latency.
Cable landing station
The document provides information about cable landing stations and the process of laying and repairing submarine optical cables. It discusses:
1) What a cable landing station is and its key components like power feeding equipment, submarine line terminal equipment, and optical distribution frames.
2) The different types of submarine cables used like double armored, single armored, and lightweight cables.
3) The procedures for laying cables which involve paying out cables from ships, attaching buoys, splicing cables, and releasing cables on the seabed.
4) Methods for burying cables underwater using plowing machines or ROVs to protect the cables.
5) The repair process when cables are damaged, which involves
Marine Communications Cable
This document provides information about submarine communications cables, including their history, technology, installation, repair, and importance. It discusses how cables carry digital data between countries along the ocean floor using fiber optic technology. The document outlines the various layers that make up submarine cables and how damage is located and repaired. It also lists some major international submarine cables and provides a map showing their routes.
Submarine Cables by Niall Toh
This document discusses several submarine cable systems including Unity Cable, APG Cable, and future submarine cable technology. It provides an overview of Unity Cable and how it revolutionized the industry by being the first hybrid cable system without an incumbent carrier and offering Ethernet interfaces. It then discusses APG Cable, the first D+ fiber submarine cable that supports 100G and future higher speeds. Finally, it outlines the submarine cable technology roadmap including increasing spectrum efficiency, higher modulation formats, and potential technologies like hollow core fiber that could further increase capacity and lower costs over time.
Presentation on Indian submarine Cable network
This document provides information about submarine cable networks in India. It discusses why satellite communication is not used more widely, provides a brief history of submarine cables, and describes some of the key features of modern submarine cables. It also lists some of the major submarine cable landing stations in India, shows a map of India's submarine cable network, and discusses maintenance and repair of damaged cables.
A simple slide on submarine cable-communication
This document discusses submarine cable communication and is presented by two students. It contains 12 pages describing the structure, setup, processing and application of submarine cables. Submarine cables are laid on the ocean floor to carry telecommunication signals between land stations. They contain protective layers and copper or aluminum tubes that house optical fibers, which allow transmission over long distances. Submarine cables connect countries in Southeast Asia, the Middle East and Western Europe, and are laid by ships connecting sections. Repeaters boost signals every 40-60 km. Submarine cables provide high-speed, reliable internet connectivity worldwide.
Optical fiber communication in bangladesh ppt
Optical fiber communication in bangladesh pptBangabandhu Sheikh Mujibur Rahman Science and Technology University
The presentation discusses optical fiber communication (OFC) in Bangladesh. It provides an overview of OFC, including how Bangladesh first connected to an international gateway, the companies using the gateway, and when OFC was first introduced. It describes the SEA-ME-WE-4 submarine cable connecting Bangladesh to other countries, and how many companies in Bangladesh use OFC. The presentation outlines the past and present layout of OFC systems, their uses, and the future potential of OFC in Bangladesh.Passive infrastructure of FTTH networks: an overview
Presentation of the FTTH Council webinar on September 2014. A general introduction to FTTH passive infrastructure and a view on the latest trends.
Speaker: Raf Meersman, CEO of Comsof
More info on planning & design of FTTH infrastructure: http://www.fiberplanit.com
Recommended
Submarine cable
Submarine cables are used to carry telecommunication signals across oceans by being laid along the seabed. They connect land-based stations between countries and continents. Modern cables have optical fibers at their core that can transmit terabits of data per second. Bangladesh is currently connected to the global cable infrastructure via the SEA-ME-WE-4 cable, but will soon connect to the new SEA-ME-WE-5 cable to gain additional bandwidth capacity. Submarine cables are preferable to satellites for international telecommunications due to their much higher data transmission capacity and lower latency.
Cable landing station
The document provides information about cable landing stations and the process of laying and repairing submarine optical cables. It discusses:
1) What a cable landing station is and its key components like power feeding equipment, submarine line terminal equipment, and optical distribution frames.
2) The different types of submarine cables used like double armored, single armored, and lightweight cables.
3) The procedures for laying cables which involve paying out cables from ships, attaching buoys, splicing cables, and releasing cables on the seabed.
4) Methods for burying cables underwater using plowing machines or ROVs to protect the cables.
5) The repair process when cables are damaged, which involves
Marine Communications Cable
This document provides information about submarine communications cables, including their history, technology, installation, repair, and importance. It discusses how cables carry digital data between countries along the ocean floor using fiber optic technology. The document outlines the various layers that make up submarine cables and how damage is located and repaired. It also lists some major international submarine cables and provides a map showing their routes.
Submarine Cables by Niall Toh
This document discusses several submarine cable systems including Unity Cable, APG Cable, and future submarine cable technology. It provides an overview of Unity Cable and how it revolutionized the industry by being the first hybrid cable system without an incumbent carrier and offering Ethernet interfaces. It then discusses APG Cable, the first D+ fiber submarine cable that supports 100G and future higher speeds. Finally, it outlines the submarine cable technology roadmap including increasing spectrum efficiency, higher modulation formats, and potential technologies like hollow core fiber that could further increase capacity and lower costs over time.
Presentation on Indian submarine Cable network
This document provides information about submarine cable networks in India. It discusses why satellite communication is not used more widely, provides a brief history of submarine cables, and describes some of the key features of modern submarine cables. It also lists some of the major submarine cable landing stations in India, shows a map of India's submarine cable network, and discusses maintenance and repair of damaged cables.
A simple slide on submarine cable-communication
This document discusses submarine cable communication and is presented by two students. It contains 12 pages describing the structure, setup, processing and application of submarine cables. Submarine cables are laid on the ocean floor to carry telecommunication signals between land stations. They contain protective layers and copper or aluminum tubes that house optical fibers, which allow transmission over long distances. Submarine cables connect countries in Southeast Asia, the Middle East and Western Europe, and are laid by ships connecting sections. Repeaters boost signals every 40-60 km. Submarine cables provide high-speed, reliable internet connectivity worldwide.
Optical fiber communication in bangladesh ppt
Optical fiber communication in bangladesh pptBangabandhu Sheikh Mujibur Rahman Science and Technology University
The presentation discusses optical fiber communication (OFC) in Bangladesh. It provides an overview of OFC, including how Bangladesh first connected to an international gateway, the companies using the gateway, and when OFC was first introduced. It describes the SEA-ME-WE-4 submarine cable connecting Bangladesh to other countries, and how many companies in Bangladesh use OFC. The presentation outlines the past and present layout of OFC systems, their uses, and the future potential of OFC in Bangladesh.Passive infrastructure of FTTH networks: an overview
Presentation of the FTTH Council webinar on September 2014. A general introduction to FTTH passive infrastructure and a view on the latest trends.
Speaker: Raf Meersman, CEO of Comsof
More info on planning & design of FTTH infrastructure: http://www.fiberplanit.com
Basics of DWDM Technology
1) DWDM combines multiple optical signals so that they can be amplified and transmitted over a single fiber, increasing network capacity.
2) Basic DWDM system components include terminal multiplexers and demultiplexers, line repeaters, and optical terminals. Optical add-drop multiplexers allow removal or insertion of wavelengths along the span.
3) Proper link budgeting is required to ensure optical power levels remain above minimum thresholds to maintain signal quality as light propagates long distances through fiber. Regular monitoring and troubleshooting helps ensure transmission quality parameters are met.
4G - LTE
The document provides an overview of Long Term Evolution (LTE) technology. It discusses that LTE is the next generation mobile network standard that uses an all-IP flat network architecture. LTE networks employ OFDMA for the downlink and SC-FDMA for the uplink. Key performance targets of LTE include peak data rates of over 100 Mbps downlink and 50 Mbps uplink, low latency, and improved spectrum efficiency. The document also outlines the LTE network architecture including components like the eNodeB, MME, SGW, and PGW.
Submarine line termination equipment (SLTE) for open cables
Jörg-Peter Elbers’ NGON and DCI World presentation explored the specifics around open cables, technology developments and the implications for enhanced networking performance. The open cables concept for subsea transport was discussed as well as methods for the navigation and management of open cables and the key performance metrics for determining success.
Optical Fiber connectors
This document discusses optical fiber connectors. It begins by introducing the ferrule, which is a cylindrical tube used in connectors to precisely align the fiber cores. The document then covers the major types of connectors that have been introduced, including ST, SC, LC, FC, MU, and MPO connectors. ST and SC connectors became dominant in the 1980s-1990s due to their low loss and ease of use. Newer connectors like LC and MPO provide higher density by reducing size and combining multiple fibers. Proper connectors are important for achieving low insertion loss while providing easy installation and connection/disconnection of fibers.
Basic WDM Optical Network
This document provides an overview of basic WDM optical networks. It describes WDM as a multiplexing technique that allows multiple wavelengths to be transmitted over the same fiber. There are two main architectures: broadcast and select, which uses a simple star topology, and wavelength routed, which establishes light paths between nodes using the same wavelength. The document outlines the key components and working principles of each architecture, including their advantages and disadvantages. Wavelength routed networks allow for wavelength reuse but require efficient wavelength assignment to avoid bandwidth loss.
Wireless Local Area Networks
Wireless local area networks (WLANs) allow for mobility by using radio frequency or infrared communications instead of cables to connect devices to a network. Common WLAN standards include 802.11a, 802.11b, 802.11g, and 802.11n. WLANs use technologies like direct sequence spread spectrum, frequency hopping spread spectrum, and orthogonal frequency-division multiplexing. The 802.11 architecture defines the physical layer, data link layer including logical link control and media access control, and network topologies like peer-to-peer, access point based, and point-to-multipoint.
Presentation of optical fiber connector
Optical fiber connectors are used to join optical fibers where connections need to be made and undone. There are several types of optical fiber connectors that are commonly used, including SC, ST, FC, LC, MT-RJ, MU, and SMA connectors. The document discusses the key features and applications of each connector type. SC and LC connectors are now most widely used due to their low cost and ease of use. Proper connector selection depends on the application and fiber type (multimode or singlemode).
Concepts of optical fiber communication
The document discusses the history and development of optical fiber communication. It describes the key windows of operation in optical fiber spectrum - the first window around 800-900nm, the second window around 1310nm, and the third window from 1510-1625nm. The third window has the lowest fiber attenuation of around 0.26dB/km and is used for most modern communication systems. The document also discusses ITU-T recommendations for optical fiber characterization and provides background on the principles and advantages of optical fiber communication.
rf planning
This document discusses radio frequency (RF) planning for cellular networks. It addresses the key aspects of RF planning including:
1) Providing adequate coverage and capacity while using spectrum efficiently and minimizing the number of cell sites.
2) Conducting a planning process that involves inputs from customers, coverage and capacity planning, parameter planning, and optimization.
3) Setting objectives for coverage, capacity, network growth, and cost-effective design.
Gpon Fundamentals
The document discusses key concepts and technologies of GPON (Gigabit-capable Passive Optical Networks), including:
1) The basic architecture of PON networks consisting of an OLT, ONUs, and a passive optical splitter.
2) Reasons for adopting the GPON standard such as supporting high-bandwidth transmission and long reach.
3) Key GPON technologies including ranging, equalization delay, dynamic bandwidth assignment (DBA), and wavelength division multiplexing (WDM) for upstream/downstream transmission.
NR_Frame_Structure_and_Air_Interface_Resources.pptx
The document discusses numerology and air interface resources in 5G New Radio (NR), including:
- NR supports multiple subcarrier spacings (SCS) to accommodate different services and bands. SCS determines symbol length and impacts coverage, latency, mobility, and phase noise.
- Time domain resources include slots, subframes, and frames which are configured similarly to LTE. Symbol length depends on SCS.
- Frequency domain resources include resource blocks and bandwidth parts. Space domain resources include antenna ports and quasi-co-location.
Chap 1&2(history and intro) wireless communication
The document provides an outline for a course on wireless communication, beginning with an introduction to wireless networking concepts, cellular system design including frequency reuse and handoff, wireless link characteristics such as propagation and fading, modulation techniques, and multiple access methods including TDMA, FDMA, and CDMA. It also gives a brief history of wireless technology from early systems like smoke signals to the development of modern cellular standards such as GSM and LTE. Key wireless networking and mobile communication systems are defined.
Lte Presentation.Ppt
Long Term Evolution (LTE) is the next generation of mobile broadband technology that provides higher data rates and network throughput compared to 3G. LTE networks use OFDM and SC-FDMA for downlink and uplink, respectively, along with MIMO and an all-IP architecture to improve performance. The network elements include eNBs, SGWs, PDN GWs and MMEs. For operators, LTE provides an opportunity to increase ARPU through new applications and services while decreasing CCPU through an all-IP infrastructure. Mass deployment of LTE is expected to begin around 2012, with LTE Advanced enabling data rates up to 1 Gbps.
3GPP Release 17: Completing the first phase of 5G evolution
The document discusses 3GPP Release 17, which brings new system capabilities and expands 5G to new devices, applications, and deployments. Some key points:
- Release 17 completes the first phase of 5G evolution. It expands 5G to new reduced capability devices, applications in new industries, and deployment models like non-terrestrial networks.
- Release 17 enhances technologies like massive MIMO, mmWave expansion, device power savings, coverage, and ultra-reliable low latency communications. It also introduces integrated access and backhaul and simple repeaters to expand 5G mmWave coverage.
- The release further scales 5G NR to support a wide range of device classes from high-end smartphones to
Cellular Narrow Band IoT- using LTE
To meet the new connectivity requirements of the emerging IoT segment, 3GPP has taken evolutionary steps on both the network side and the device side. A single technology or solution cannot be ideal to all the different potential IoT applications, market situations and spectrum availability. As a result, the 3GPP standardizing several technologies, including Extended Coverage GSM (EC-GSM), LTE-M and NB-IoT.
LTE-M, NB-IoT and EC-GSM are all superior solutions to meet IoT requirements as a family of solutions, and can complement each other based on technology availability, use case requirements and deployment scenarios. The evolution for these technologies is shown in figure #5. Technical studies and normative work for the support of Machine Type Communication (MTC) as part of 3GPP LTE specifications for RAN began in 3GPP Release 12 and are continuing with the goals of developing features optimized for devices with MTC traffic.
4 g LTE, LTE Advance
4G refers to fourth-generation wireless which aims to provide faster data speeds and more capabilities than 3G. 4G LTE and 4G LTE Advanced are competing 4G standards. 4G LTE aims to provide speeds up to 10 times faster than 3G, while 4G LTE Advanced, standardized in 2011, is an enhancement that provides even higher speeds and more advanced technologies. The key difference is that 4G LTE Advanced supports newer technologies for higher performance compared to 4G LTE.
Submarine Cable and Capacity Pricing Trends in Asia-Pacific
This document summarizes trends in submarine cables and capacity pricing in Asia-Pacific. It finds that demand for international bandwidth in Asia and Oceania continues to grow strongly, increasingly focused on intra-regional routes. Content providers like Google, Facebook, and Amazon are major drivers of new submarine cable investments in the region. Investment in new cables is surging globally and in Asia-Pacific, with many new cables recently activated or planned that will provide new and diverse paths and routes. Capacity pricing continues to experience erosion across regions and capacities like 10G and 100G, though price parity has not been fully achieved. Variances remain between routes and cities for both wavelength and IP transit prices.
Wireless communication
Wireless communication transmits voice and data using electromagnetic waves without physical connections like wires. It provides freedom of movement and flexibility to connect multiple devices. Common wireless technologies include radio, TV, Bluetooth, WiFi, and cellular networks. Wireless communication faces challenges like security issues, infrastructure costs, and signal interference, but enables connectivity anywhere through standards like LTE and 5G.
LTE Architecture Overview
We are going to introduce the 4G/LTE mobile network architecture. We focused on LTE network elements and reviewed the spec.
www.senatelecom.com
Li fi and its application
Li-Fi uses visible light communication (VLC) to transmit data wirelessly using LED light bulbs. It has several advantages over traditional Wi-Fi including higher bandwidth, lower latency, and no interference with other wireless networks. Li-Fi works by switching LED bulbs on and off very fast in order to transmit digital signals that can be detected by a photodiode or image sensor. It has many potential applications including underwater communications, traffic management systems that allow cars and traffic lights to communicate, providing internet access on planes and in hospitals where Wi-Fi is restricted, and indoor navigation systems for the visually impaired. Li-Fi could also be used for disaster communication when other networks are disrupted.
TIM photonic networks June 14 2021.pdf
This document discusses TIM's employment program and seminar on photonic network technologies:
- TIM plans to hire a total of 750 people on permanent contracts between 2021-2022, including 100 hires at Telecontact, to fill several professional profiles across main company functions.
- The seminar agenda includes context on photonic networks, an introduction to ROADM technology, and a discussion of coherent technology and system design. It is presented by Emilio Riccardi from TIM's IP, Transport & Core Innovation team.
- The document then provides details on ROADM and coherent transmission technologies, including WSS components, network architectures, modulation formats, and their benefits over older IM-DD systems
Distance Vector Multicast Routing Protocol (DVMRP) : Combined Presentation
The document discusses Distance Vector Multicast Routing Protocol (DVMRP), which is a multicast routing protocol used to route multicast data packets across subnets. It operates similarly to RIP, maintaining routing tables and sharing information with neighboring routers. DVMRP uses reverse path multicasting and initially floods packets to discover group members, then prunes paths where there are no members. It is suitable for use within autonomous systems.
More Related Content
What's hot
Basics of DWDM Technology
1) DWDM combines multiple optical signals so that they can be amplified and transmitted over a single fiber, increasing network capacity.
2) Basic DWDM system components include terminal multiplexers and demultiplexers, line repeaters, and optical terminals. Optical add-drop multiplexers allow removal or insertion of wavelengths along the span.
3) Proper link budgeting is required to ensure optical power levels remain above minimum thresholds to maintain signal quality as light propagates long distances through fiber. Regular monitoring and troubleshooting helps ensure transmission quality parameters are met.
4G - LTE
The document provides an overview of Long Term Evolution (LTE) technology. It discusses that LTE is the next generation mobile network standard that uses an all-IP flat network architecture. LTE networks employ OFDMA for the downlink and SC-FDMA for the uplink. Key performance targets of LTE include peak data rates of over 100 Mbps downlink and 50 Mbps uplink, low latency, and improved spectrum efficiency. The document also outlines the LTE network architecture including components like the eNodeB, MME, SGW, and PGW.
Submarine line termination equipment (SLTE) for open cables
Jörg-Peter Elbers’ NGON and DCI World presentation explored the specifics around open cables, technology developments and the implications for enhanced networking performance. The open cables concept for subsea transport was discussed as well as methods for the navigation and management of open cables and the key performance metrics for determining success.
Optical Fiber connectors
This document discusses optical fiber connectors. It begins by introducing the ferrule, which is a cylindrical tube used in connectors to precisely align the fiber cores. The document then covers the major types of connectors that have been introduced, including ST, SC, LC, FC, MU, and MPO connectors. ST and SC connectors became dominant in the 1980s-1990s due to their low loss and ease of use. Newer connectors like LC and MPO provide higher density by reducing size and combining multiple fibers. Proper connectors are important for achieving low insertion loss while providing easy installation and connection/disconnection of fibers.
Basic WDM Optical Network
This document provides an overview of basic WDM optical networks. It describes WDM as a multiplexing technique that allows multiple wavelengths to be transmitted over the same fiber. There are two main architectures: broadcast and select, which uses a simple star topology, and wavelength routed, which establishes light paths between nodes using the same wavelength. The document outlines the key components and working principles of each architecture, including their advantages and disadvantages. Wavelength routed networks allow for wavelength reuse but require efficient wavelength assignment to avoid bandwidth loss.
Wireless Local Area Networks
Wireless local area networks (WLANs) allow for mobility by using radio frequency or infrared communications instead of cables to connect devices to a network. Common WLAN standards include 802.11a, 802.11b, 802.11g, and 802.11n. WLANs use technologies like direct sequence spread spectrum, frequency hopping spread spectrum, and orthogonal frequency-division multiplexing. The 802.11 architecture defines the physical layer, data link layer including logical link control and media access control, and network topologies like peer-to-peer, access point based, and point-to-multipoint.
Presentation of optical fiber connector
Optical fiber connectors are used to join optical fibers where connections need to be made and undone. There are several types of optical fiber connectors that are commonly used, including SC, ST, FC, LC, MT-RJ, MU, and SMA connectors. The document discusses the key features and applications of each connector type. SC and LC connectors are now most widely used due to their low cost and ease of use. Proper connector selection depends on the application and fiber type (multimode or singlemode).
Concepts of optical fiber communication
The document discusses the history and development of optical fiber communication. It describes the key windows of operation in optical fiber spectrum - the first window around 800-900nm, the second window around 1310nm, and the third window from 1510-1625nm. The third window has the lowest fiber attenuation of around 0.26dB/km and is used for most modern communication systems. The document also discusses ITU-T recommendations for optical fiber characterization and provides background on the principles and advantages of optical fiber communication.
rf planning
This document discusses radio frequency (RF) planning for cellular networks. It addresses the key aspects of RF planning including:
1) Providing adequate coverage and capacity while using spectrum efficiently and minimizing the number of cell sites.
2) Conducting a planning process that involves inputs from customers, coverage and capacity planning, parameter planning, and optimization.
3) Setting objectives for coverage, capacity, network growth, and cost-effective design.
Gpon Fundamentals
The document discusses key concepts and technologies of GPON (Gigabit-capable Passive Optical Networks), including:
1) The basic architecture of PON networks consisting of an OLT, ONUs, and a passive optical splitter.
2) Reasons for adopting the GPON standard such as supporting high-bandwidth transmission and long reach.
3) Key GPON technologies including ranging, equalization delay, dynamic bandwidth assignment (DBA), and wavelength division multiplexing (WDM) for upstream/downstream transmission.
NR_Frame_Structure_and_Air_Interface_Resources.pptx
The document discusses numerology and air interface resources in 5G New Radio (NR), including:
- NR supports multiple subcarrier spacings (SCS) to accommodate different services and bands. SCS determines symbol length and impacts coverage, latency, mobility, and phase noise.
- Time domain resources include slots, subframes, and frames which are configured similarly to LTE. Symbol length depends on SCS.
- Frequency domain resources include resource blocks and bandwidth parts. Space domain resources include antenna ports and quasi-co-location.
Chap 1&2(history and intro) wireless communication
The document provides an outline for a course on wireless communication, beginning with an introduction to wireless networking concepts, cellular system design including frequency reuse and handoff, wireless link characteristics such as propagation and fading, modulation techniques, and multiple access methods including TDMA, FDMA, and CDMA. It also gives a brief history of wireless technology from early systems like smoke signals to the development of modern cellular standards such as GSM and LTE. Key wireless networking and mobile communication systems are defined.
Lte Presentation.Ppt
Long Term Evolution (LTE) is the next generation of mobile broadband technology that provides higher data rates and network throughput compared to 3G. LTE networks use OFDM and SC-FDMA for downlink and uplink, respectively, along with MIMO and an all-IP architecture to improve performance. The network elements include eNBs, SGWs, PDN GWs and MMEs. For operators, LTE provides an opportunity to increase ARPU through new applications and services while decreasing CCPU through an all-IP infrastructure. Mass deployment of LTE is expected to begin around 2012, with LTE Advanced enabling data rates up to 1 Gbps.
3GPP Release 17: Completing the first phase of 5G evolution
The document discusses 3GPP Release 17, which brings new system capabilities and expands 5G to new devices, applications, and deployments. Some key points:
- Release 17 completes the first phase of 5G evolution. It expands 5G to new reduced capability devices, applications in new industries, and deployment models like non-terrestrial networks.
- Release 17 enhances technologies like massive MIMO, mmWave expansion, device power savings, coverage, and ultra-reliable low latency communications. It also introduces integrated access and backhaul and simple repeaters to expand 5G mmWave coverage.
- The release further scales 5G NR to support a wide range of device classes from high-end smartphones to
Cellular Narrow Band IoT- using LTE
To meet the new connectivity requirements of the emerging IoT segment, 3GPP has taken evolutionary steps on both the network side and the device side. A single technology or solution cannot be ideal to all the different potential IoT applications, market situations and spectrum availability. As a result, the 3GPP standardizing several technologies, including Extended Coverage GSM (EC-GSM), LTE-M and NB-IoT.
LTE-M, NB-IoT and EC-GSM are all superior solutions to meet IoT requirements as a family of solutions, and can complement each other based on technology availability, use case requirements and deployment scenarios. The evolution for these technologies is shown in figure #5. Technical studies and normative work for the support of Machine Type Communication (MTC) as part of 3GPP LTE specifications for RAN began in 3GPP Release 12 and are continuing with the goals of developing features optimized for devices with MTC traffic.
4 g LTE, LTE Advance
4G refers to fourth-generation wireless which aims to provide faster data speeds and more capabilities than 3G. 4G LTE and 4G LTE Advanced are competing 4G standards. 4G LTE aims to provide speeds up to 10 times faster than 3G, while 4G LTE Advanced, standardized in 2011, is an enhancement that provides even higher speeds and more advanced technologies. The key difference is that 4G LTE Advanced supports newer technologies for higher performance compared to 4G LTE.
Submarine Cable and Capacity Pricing Trends in Asia-Pacific
This document summarizes trends in submarine cables and capacity pricing in Asia-Pacific. It finds that demand for international bandwidth in Asia and Oceania continues to grow strongly, increasingly focused on intra-regional routes. Content providers like Google, Facebook, and Amazon are major drivers of new submarine cable investments in the region. Investment in new cables is surging globally and in Asia-Pacific, with many new cables recently activated or planned that will provide new and diverse paths and routes. Capacity pricing continues to experience erosion across regions and capacities like 10G and 100G, though price parity has not been fully achieved. Variances remain between routes and cities for both wavelength and IP transit prices.
Wireless communication
Wireless communication transmits voice and data using electromagnetic waves without physical connections like wires. It provides freedom of movement and flexibility to connect multiple devices. Common wireless technologies include radio, TV, Bluetooth, WiFi, and cellular networks. Wireless communication faces challenges like security issues, infrastructure costs, and signal interference, but enables connectivity anywhere through standards like LTE and 5G.
LTE Architecture Overview
We are going to introduce the 4G/LTE mobile network architecture. We focused on LTE network elements and reviewed the spec.
www.senatelecom.com
Li fi and its application
Li-Fi uses visible light communication (VLC) to transmit data wirelessly using LED light bulbs. It has several advantages over traditional Wi-Fi including higher bandwidth, lower latency, and no interference with other wireless networks. Li-Fi works by switching LED bulbs on and off very fast in order to transmit digital signals that can be detected by a photodiode or image sensor. It has many potential applications including underwater communications, traffic management systems that allow cars and traffic lights to communicate, providing internet access on planes and in hospitals where Wi-Fi is restricted, and indoor navigation systems for the visually impaired. Li-Fi could also be used for disaster communication when other networks are disrupted.
What's hot (20)
Submarine line termination equipment (SLTE) for open cables
Submarine line termination equipment (SLTE) for open cables
NR_Frame_Structure_and_Air_Interface_Resources.pptx
NR_Frame_Structure_and_Air_Interface_Resources.pptx
Chap 1&2(history and intro) wireless communication
Chap 1&2(history and intro) wireless communication
3GPP Release 17: Completing the first phase of 5G evolution
3GPP Release 17: Completing the first phase of 5G evolution
Submarine Cable and Capacity Pricing Trends in Asia-Pacific
Submarine Cable and Capacity Pricing Trends in Asia-Pacific
Similar to Submarine cables: Indian Perspective
TIM photonic networks June 14 2021.pdf
This document discusses TIM's employment program and seminar on photonic network technologies:
- TIM plans to hire a total of 750 people on permanent contracts between 2021-2022, including 100 hires at Telecontact, to fill several professional profiles across main company functions.
- The seminar agenda includes context on photonic networks, an introduction to ROADM technology, and a discussion of coherent technology and system design. It is presented by Emilio Riccardi from TIM's IP, Transport & Core Innovation team.
- The document then provides details on ROADM and coherent transmission technologies, including WSS components, network architectures, modulation formats, and their benefits over older IM-DD systems
Distance Vector Multicast Routing Protocol (DVMRP) : Combined Presentation
The document discusses Distance Vector Multicast Routing Protocol (DVMRP), which is a multicast routing protocol used to route multicast data packets across subnets. It operates similarly to RIP, maintaining routing tables and sharing information with neighboring routers. DVMRP uses reverse path multicasting and initially floods packets to discover group members, then prunes paths where there are no members. It is suitable for use within autonomous systems.
Seminar report of optical ethernet
Optical Ethernet extends Ethernet beyond local area networks into metropolitan and wide area networks. It combines the flexibility, simplicity and cost-effectiveness of Ethernet with the reliability, speed and reach of optical networking. Key components are the ability to segregate different user traffic and deliver customized service levels. Optical Ethernet technologies provide the longest spans and greatest speeds for local area networks today and will continue to advance Ethernet transport capabilities.
The Next Generation Multimode Fiber: Wide Bandwidth MMF
Learn about Wide Band Multimode Fiber (WBMMF) -- the application drivers, multiplexing technology, parallel fiber transmission, and Short Wavelength Wave Division Multiplexing. This presentation will also review the cabling evolution roadmap and the WBMMF specification framework.
Pacnet Jan 2011
Pacnet is an Asia-Pacific telecommunications provider with a history dating back to 1999. It owns two subsea fiber optic cable systems, EAC and C2C, which it combined into a dual core "Pacnet Super System" for higher performance. In 2010, Pacnet launched Unity, a new subsea cable system connecting Los Angeles, Japan, and China that Pacnet has a major stake in. Pacnet operates data centers across Asia-Pacific and has extensive IP backbone networks to connect its assets and customers across the region.
2015 10 07 - efficient optical transport layer for high-capacity optical netw...
2015 10 07 - efficient optical transport layer for high-capacity optical netw...Xtera Communications
1) The document discusses efficient optical transport layer solutions for high-capacity optical networking, focusing on long-haul data center interconnect (DCI) enabled by coherent transmission technologies and Raman optical amplification.
2) It describes how Raman amplification can provide spectrum expansion, reach extension, and higher capacity-distance products to meet the needs of new network operators with long-span networks.
3) Key results shown include over 150x100G transmission over 630km in two spans using Raman amplification, demonstrating its ability to meet the long-haul DCI requirements of high capacity, long reach, and low latency on existing fiber infrastructure.Presentation indian submarine Cable network
Submarine cables are crucial for global telecommunications as they carry nearly all international phone and internet traffic between continents via fiber optic lines laid on the ocean floor. India has 10 submarine cable landing stations and is connected to countries around the world through several major cables. While satellites can transmit data, submarine cables have much higher data transmission capacity and are more reliable and cost-effective for telecom. Maintaining and repairing damaged undersea cables is important for global connectivity.
2015 02 04 international optical transport developments wdm africa 2015
This presentation reviews the current status and the forecast for international connectivity to Africa and traffic demands inside the continent. In a second step, the technical solutions, including wider spectrum as enabled by Xtera’s Wise Raman technology, to respond to the traffic growth are described. This presentation was delivered at WDM & Next Generation Optical Networking Africa 2015 conference (4-5 February 2015 – Cape Town, South Africa).
CCS Presentation On Lda Oct 2010 (Compressed Pics) Parts 3 5
This document provides an overview of Connectix Cabling Systems' (CCS) product portfolio and solutions for cabling infrastructure. CCS offers copper and optical fibre cabling systems, including their Net 10G Cat 6A copper cabling, pre-terminated cabling solutions for copper and fibre, and their Starlight MTP fibre system for high-density fibre applications. The document also discusses CCS' racks and enclosures, as well as their training services. Key benefits of CCS solutions mentioned include reduced installation time, improved quality and consistency with pre-terminated cabling, and higher port densities with their Starlight MTP fibre system.
Internet of Space - Communication Systems for Future Space-bases Internet Ser...
Internet of Space - Communication Systems for Future Space-bases Internet Ser...Paulo Milheiro Mendes
1) The document discusses the potential for satellite constellations in low Earth orbit (LEO) to enable a space-based internet through providing global connectivity with lower latency than traditional geostationary satellites.
2) Emerging LEO constellations from companies like SpaceX, OneWeb, and Telesat promise speeds close to fiber with nearly full global coverage and latency around 25ms.
3) For the space internet to be realized, challenges around developing low-cost user terminals, multi-tenant cooperation between constellations, and addressing different traffic needs across orbital regimes must be overcome.Karafolas
Optical communications in space have been used both within satellites (intra-satellite) and between satellites (inter-satellite). For intra-satellite communications, optical fibers allow high data rates of several terabits per second to be transmitted over short distances within a satellite. For inter-satellite communications, laser links between satellites allow for higher data efficiencies over long distances in space compared to radio frequency links. Recent developments include the first satellite payload to rely critically on fiber optics and demonstrations of quantum communications via optical links in space.
Trends and evolution of optical networks and technologies
The document discusses trends and research in optical networks and technologies. Key points include:
- Optical networks are becoming more important due to increasing bandwidth demands from services like the internet. Research aims to increase network capacity and intelligence while lowering costs.
- 40Gbit/s transmission systems are being developed to provide multi-terabit capacities over long distances. All-optical networking components like optical cross-connects and regenerators are also a focus.
- Optical networks are evolving from simple transmission to include wavelength routing, network protection at the optical layer, and potentially full IP-over-optics implementation.
- Components research focuses on higher performance devices for functions like switching, modulation, and amplification,
eee264cxxxxxxxxxxxxxxxxxxccccccccccccccc
This document provides an overview of the history and evolution of mobile radio networks from 1G to 3G. It discusses the development of early cellular networks using analog technologies in the 1970s-1980s and the transition to digital 2G networks in the 1990s using technologies like GSM, CDMA, and TDMA. It then introduces 3G networks, which aimed to support higher data rates, multimedia services, and greater network capacity through more spectrally efficient wireless technologies like W-CDMA and CDMA2000. The document outlines the international standardization efforts around 3G and different radio access technologies being developed and deployed globally.
Over view of Transmission Technologies & Optical Fiber Communication
Topics covered in this presentation:
GENERAL: History of Transmission Systems
Optical fiber communication,
History of OFC
Advantages
Applications
ITU-T Recommendations
Fiber optic principle
Windows of operation
Trends in OF Communication
Fiber classification
OF Cable Types
Optical Fiber transmission impairments
Optical Sources and Detectors
Optical Link Characterization and Design
History(5)
Tyco Telecommunications has played a leading role in undersea optical networking for over 50 years, pioneering many technologies that enabled fiber optic cables to meet rapidly growing internet demands. Some key achievements include developing the first transatlantic fiber optic system in 1988, demonstrating the first IP packet transport across a transoceanic cable in 1999, and increasing cable capacity over 500% from 1999 to 2003. Today, Tyco Telecommunications continues innovating to provide reliable, high-bandwidth connectivity globally using technologies like OADM branching units and 40Gbps transport.
LS Telecomunication Cable Catalogue
Bao gồm Copper Cables (CAT3/CAT5e/CAT6/CAT6A/CAT7), Fiber Optical Cables, Coaxial Cables (RG6,RG11,RF…), Signal & Control Cables, và các phụ kiện (Patch Panel, Patch Cord, Connectivity, Outlet, Tools, rack, Closet,…), theo tiêu chuẩn Âu/Mỹ (USA(UL Listed) & European Standard (DELTA)). Trade mark of this series is SIMPLE, sản xuất tại Việt nam ( UTP CAT5e/CAT6) và Hàn Quốc (Other Cables & Accessories). LS Cable & System sản xuất UTP CAT5e/CAT6 tại nhà máy LSCV Nhơn Trạch, Đồng Nai từ 2007. Hầu hết sản phẩm được xuất khẩu sang Mỹ, Châu Âu, Nhật, Trung Đông,…và được phân phối rộng rãi tại Việt Nam từ năm 2013.
Pacific cable
This document provides an overview of transpacific submarine cables, including:
- New cable systems that have been activated or planned like China-US, PC-1, SEA-ME-WE-3, and FLAG Pacific-1.
- The technology used in these systems has advanced from monopoly and PTO-owned to private ownership and from WDM to DWDM.
- Cable system costs have declined significantly over time, with STM-1 O&M charges dropping from $350,000 in 1998 to a projected $15,000 in 2003.
Indonesia Submarine Cables
1. The document discusses the domestic backbone networks of several major telecom operators in Indonesia, including PT Telkom, PT Excelcomindo Pratama, and PT Indosat.
2. It provides information on the terrestrial and submarine fiber optic cable networks of each operator spanning the islands of Java, Sumatra, Bali, Kalimantan, Sulawesi, and beyond.
3. The Palapa Ring project is also summarized, which aims to connect over 33 provinces and 460 districts across the archipelago through a network of over 35,000 km of submarine cable and 21,708 km of inland cable.
Hyperscale Cloud and Digital Services Infrastructure - Tan Tze Meng
This document discusses how hyperscale cloud providers like Google, Facebook, and Amazon are driving investment in new submarine cable systems that connect data centers around the world. It provides examples of several new submarine cables funded by these companies, including cables connecting the US to Asia, and notes that hyperscale cloud providers are building more internet infrastructure than traditional telecom companies. The document suggests that with this level of infrastructure investment, the definition of "OTT player" may no longer apply as these companies have become core internet infrastructure suppliers.
TWEPP09_Antona_Key_technologies_for_present_and_future_optical_networks_v3 (2...
TWEPP09_Antona_Key_technologies_for_present_and_future_optical_networks_v3 (2...HimansuShekharPradha1
This document discusses key technologies for optical networks. It summarizes trends in optical networks including increasing capacity through higher spectral efficiency and new modulation formats. This allows increasing channel bit rates and implementing wavelength division multiplexing with more channels. A second trend is improving transparency by reducing the need for optical-electrical-optical conversion through advances in components like wavelength selective switches. This allows more traffic to pass through the network without regeneration. Achieving high transparency over long distances presents challenges around predicting and maintaining signal quality as it propagates through the fiber.Similar to Submarine cables: Indian Perspective (20)
Distance Vector Multicast Routing Protocol (DVMRP) : Combined Presentation
Distance Vector Multicast Routing Protocol (DVMRP) : Combined Presentation
The Next Generation Multimode Fiber: Wide Bandwidth MMF
The Next Generation Multimode Fiber: Wide Bandwidth MMF
2015 10 07 - efficient optical transport layer for high-capacity optical netw...
2015 10 07 - efficient optical transport layer for high-capacity optical netw...
2015 02 04 international optical transport developments wdm africa 2015
2015 02 04 international optical transport developments wdm africa 2015
CCS Presentation On Lda Oct 2010 (Compressed Pics) Parts 3 5
CCS Presentation On Lda Oct 2010 (Compressed Pics) Parts 3 5
Internet of Space - Communication Systems for Future Space-bases Internet Ser...
Internet of Space - Communication Systems for Future Space-bases Internet Ser...
Trends and evolution of optical networks and technologies
Trends and evolution of optical networks and technologies
Over view of Transmission Technologies & Optical Fiber Communication
Over view of Transmission Technologies & Optical Fiber Communication
Hyperscale Cloud and Digital Services Infrastructure - Tan Tze Meng
Hyperscale Cloud and Digital Services Infrastructure - Tan Tze Meng
TWEPP09_Antona_Key_technologies_for_present_and_future_optical_networks_v3 (2...
TWEPP09_Antona_Key_technologies_for_present_and_future_optical_networks_v3 (2...
More from Subhajit Sahu
About TrueTime, Spanner, Clock synchronization, CAP theorem, Two-phase lockin...
TrueTime is a service that enables the use of globally synchronized clocks, with bounded error. It returns a time interval that is guaranteed to contain the clock’s actual time for some time during the call’s execution. If two intervals do not overlap, then we know calls were definitely ordered in real time. In general, synchronized clocks can be used to avoid communication in a distributed system.
The underlying source of time is a combination of GPS receivers and atomic clocks. As there are “time masters” in every datacenter (redundantly), it is likely that both sides of a partition would continue to enjoy accurate time. Individual nodes however need network connectivity to the masters, and without it their clocks will drift. Thus, during a partition their intervals slowly grow wider over time, based on bounds on the rate of local clock drift. Operations depending on TrueTime, such as Paxos leader election or transaction commits, thus have to wait a little longer, but the operation still completes (assuming the 2PC and quorum communication are working).
Levelwise PageRank with Loop-Based Dead End Handling Strategy : SHORT REPORT ...
Abstract — Levelwise PageRank is an alternative method of PageRank computation which decomposes the input graph into a directed acyclic block-graph of strongly connected components, and processes them in topological order, one level at a time. This enables calculation for ranks in a distributed fashion without per-iteration communication, unlike the standard method where all vertices are processed in each iteration. It however comes with a precondition of the absence of dead ends in the input graph. Here, the native non-distributed performance of Levelwise PageRank was compared against Monolithic PageRank on a CPU as well as a GPU. To ensure a fair comparison, Monolithic PageRank was also performed on a graph where vertices were split by components. Results indicate that Levelwise PageRank is about as fast as Monolithic PageRank on the CPU, but quite a bit slower on the GPU. Slowdown on the GPU is likely caused by a large submission of small workloads, and expected to be non-issue when the computation is performed on massive graphs.
Adjusting Bitset for graph : SHORT REPORT / NOTES
Compressed Sparse Row (CSR) is an adjacency-list based graph representation that is commonly used for efficient graph computations. Unfortunately, using CSR for dynamic graphs is impractical since addition/deletion of a single edge can require on average (N+M)/2 memory accesses, in order to update source-offsets and destination-indices. A common approach is therefore to store edge-lists/destination-indices as an array of arrays, where each edge-list is an array belonging to a vertex. While this is good enough for small graphs, it quickly becomes a bottleneck for large graphs. What causes this bottleneck depends on whether the edge-lists are sorted or unsorted. If they are sorted, checking for an edge requires about log(E) memory accesses, but adding an edge on average requires E/2 accesses, where E is the number of edges of a given vertex. Note that both addition and deletion of edges in a dynamic graph require checking for an existing edge, before adding or deleting it. If edge lists are unsorted, checking for an edge requires around E/2 memory accesses, but adding an edge requires only 1 memory access.
Algorithmic optimizations for Dynamic Levelwise PageRank (from STICD) : SHORT...
Techniques to optimize the pagerank algorithm usually fall in two categories. One is to try reducing the work per iteration, and the other is to try reducing the number of iterations. These goals are often at odds with one another. Skipping computation on vertices which have already converged has the potential to save iteration time. Skipping in-identical vertices, with the same in-links, helps reduce duplicate computations and thus could help reduce iteration time. Road networks often have chains which can be short-circuited before pagerank computation to improve performance. Final ranks of chain nodes can be easily calculated. This could reduce both the iteration time, and the number of iterations. If a graph has no dangling nodes, pagerank of each strongly connected component can be computed in topological order. This could help reduce the iteration time, no. of iterations, and also enable multi-iteration concurrency in pagerank computation. The combination of all of the above methods is the STICD algorithm. [sticd] For dynamic graphs, unchanged components whose ranks are unaffected can be skipped altogether.
Adjusting primitives for graph : SHORT REPORT / NOTES
Graph algorithms, like PageRank Compressed Sparse Row (CSR) is an adjacency-list based graph representation that is
Multiply with different modes (map)
1. Performance of sequential execution based vs OpenMP based vector multiply.
2. Comparing various launch configs for CUDA based vector multiply.
Sum with different storage types (reduce)
1. Performance of vector element sum using float vs bfloat16 as the storage type.
Sum with different modes (reduce)
1. Performance of sequential execution based vs OpenMP based vector element sum.
2. Performance of memcpy vs in-place based CUDA based vector element sum.
3. Comparing various launch configs for CUDA based vector element sum (memcpy).
4. Comparing various launch configs for CUDA based vector element sum (in-place).
Sum with in-place strategies of CUDA mode (reduce)
1. Comparing various launch configs for CUDA based vector element sum (in-place).
Experiments with Primitive operations : SHORT REPORT / NOTES
This includes:
- Multiply with different modes (map)
1. Performance of sequential execution based vs OpenMP based vector multiply.
2. Comparing various launch configs for CUDA based vector multiply.
- Sum with different storage types (reduce)
1. Performance of vector element sum using float vs bfloat16 as the storage type.
- Sum with different modes (reduce)
1. Performance of sequential execution based vs OpenMP based vector element sum.
2. Performance of memcpy vs in-place based CUDA based vector element sum.
3. Comparing various launch configs for CUDA based vector element sum (memcpy).
4. Comparing various launch configs for CUDA based vector element sum (in-place).
- Sum with in-place strategies of CUDA mode (reduce)
1. Comparing various launch configs for CUDA based vector element sum (in-place).
PageRank Experiments : SHORT REPORT / NOTES
This includes:
- Adjusting data types for rank vector
- Adjusting Pagerank parameters
- Adjusting Sequential approach
- Adjusting OpenMP approach
- Comparing sequential approach
- Adjusting Monolithic (Sequential) optimizations (from STICD)
- Adjusting Levelwise (STICD) approach
- Comparing Levelwise (STICD) approach
- Adjusting ranks for dynamic graphs
- Adjusting Levelwise (STICD) dynamic approach
- Comparing dynamic approach with static
- Adjusting Monolithic CUDA approach
- Adjusting Monolithic CUDA optimizations (from STICD)
- Adjusting Levelwise (STICD) CUDA approach
- Comparing Levelwise (STICD) CUDA approach
- Comparing dynamic CUDA approach with static
- Comparing dynamic optimized CUDA approach with static
Algorithmic optimizations for Dynamic Monolithic PageRank (from STICD) : SHOR...
Techniques to optimize the pagerank algorithm usually fall in two categories. One is to try reducing the work per iteration, and the other is to try reducing the number of iterations. These goals are often at odds with one another. Skipping computation on vertices which have already converged has the potential to save iteration time. Skipping in-identical vertices, with the same in-links, helps reduce duplicate computations and thus could help reduce iteration time. Road networks often have chains which can be short-circuited before pagerank computation to improve performance. Final ranks of chain nodes can be easily calculated. This could reduce both the iteration time, and the number of iterations. If a graph has no dangling nodes, pagerank of each strongly connected component can be computed in topological order. This could help reduce the iteration time, no. of iterations, and also enable multi-iteration concurrency in pagerank computation. The combination of all of the above methods is the STICD algorithm. [sticd] For dynamic graphs, unchanged components whose ranks are unaffected can be skipped altogether.
Adjusting OpenMP PageRank : SHORT REPORT / NOTES
For massive graphs that fit in RAM, but not in GPU memory, it is possible to take
advantage of a shared memory system with multiple CPUs, each with multiple cores, to
accelerate pagerank computation. If the NUMA architecture of the system is properly taken
into account with good vertex partitioning, the speedup can be significant. To take steps in
this direction, experiments are conducted to implement pagerank in OpenMP using two
different approaches, uniform and hybrid. The uniform approach runs all primitives required
for pagerank in OpenMP mode (with multiple threads). On the other hand, the hybrid
approach runs certain primitives in sequential mode (i.e., sumAt, multiply).
word2vec, node2vec, graph2vec, X2vec: Towards a Theory of Vector Embeddings o...
Below are the important points I note from the 2020 paper by Martin Grohe:
- 1-WL distinguishes almost all graphs, in a probabilistic sense
- Classical WL is two dimensional Weisfeiler-Leman
- DeepWL is an unlimited version of WL graph that runs in polynomial time.
- Knowledge graphs are essentially graphs with vertex/edge attributes
ABSTRACT:
Vector representations of graphs and relational structures, whether handcrafted feature vectors or learned representations, enable us to apply standard data analysis and machine learning techniques to the structures. A wide range of methods for generating such embeddings have been studied in the machine learning and knowledge representation literature. However, vector embeddings have received relatively little attention from a theoretical point of view.
Starting with a survey of embedding techniques that have been used in practice, in this paper we propose two theoretical approaches that we see as central for understanding the foundations of vector embeddings. We draw connections between the various approaches and suggest directions for future research.
DyGraph: A Dynamic Graph Generator and Benchmark Suite : NOTES
https://gist.github.com/wolfram77/54c4a14d9ea547183c6c7b3518bf9cd1
There exist a number of dynamic graph generators. Barbasi-Albert model iteratively attach new vertices to pre-exsiting vertices in the graph using preferential attachment (edges to high degree vertices are more likely - rich get richer - Pareto principle). However, graph size increases monotonically, and density of graph keeps increasing (sparsity decreasing).
Gorke's model uses a defined clustering to uniformly add vertices and edges. Purohit's model uses motifs (eg. triangles) to mimick properties of existing dynamic graphs, such as growth rate, structure, and degree distribution. Kronecker graph generators are used to increase size of a given graph, with power-law distribution.
To generate dynamic graphs, we must choose a metric to compare two graphs. Common metrics include diameter, clustering coefficient (modularity?), triangle counting (triangle density?), and degree distribution.
In this paper, the authors propose Dygraph, a dynamic graph generator that uses degree distribution as the only metric. The authors observe that many real-world graphs differ from the power-law distribution at the tail end. To address this issue, they propose binning, where the vertices beyond a certain degree (minDeg = min(deg) s.t. |V(deg)| < H, where H~10 is the number of vertices with a given degree below which are binned) are grouped into bins of degree-width binWidth, max-degree localMax, and number of degrees in bin with at least one vertex binSize (to keep track of sparsity). This helps the authors to generate graphs with a more realistic degree distribution.
The process of generating a dynamic graph is as follows. First the difference between the desired and the current degree distribution is calculated. The authors then create an edge-addition set where each vertex is present as many times as the number of additional incident edges it must recieve. Edges are then created by connecting two vertices randomly from this set, and removing both from the set once connected. Currently, authors reject self-loops and duplicate edges. Removal of edges is done in a similar fashion.
Authors observe that adding edges with power-law properties dominates the execution time, and consider parallelizing DyGraph as part of future work.
Shared memory Parallelism (NOTES)
My notes on shared memory parallelism.
Shared memory is memory that may be simultaneously accessed by multiple programs with an intent to provide communication among them or avoid redundant copies. Shared memory is an efficient means of passing data between programs. Using memory for communication inside a single program, e.g. among its multiple threads, is also referred to as shared memory [REF].
A Dynamic Algorithm for Local Community Detection in Graphs : NOTES
**Community detection methods** can be *global* or *local*. **Global community detection methods** divide the entire graph into groups. Existing global algorithms include:
- Random walk methods
- Spectral partitioning
- Label propagation
- Greedy agglomerative and divisive algorithms
- Clique percolation
https://gist.github.com/wolfram77/b4316609265b5b9f88027bbc491f80b6
There is a growing body of work in *detecting overlapping communities*. **Seed set expansion** is a **local community detection method** where a relevant *seed vertices* of interest are picked and *expanded to form communities* surrounding them. The quality of each community is measured using a *fitness function*.
**Modularity** is a *fitness function* which compares the number of intra-community edges to the expected number in a random-null model. **Conductance** is another popular fitness score that measures the community cut or inter-community edges. Many *overlapping community detection* methods **use a modified ratio** of intra-community edges to all edges with atleast one endpoint in the community.
Andersen et al. use a **Spectral PageRank-Nibble method** which minimizes conductance and is formed by adding vertices in order of decreasing PageRank values. Andersen and Lang develop a **random walk approach** in which some vertices in the seed set may not be placed in the final community. Clauset gives a **greedy method** that *starts from a single vertex* and then iteratively adds neighboring vertices *maximizing the local modularity score*. Riedy et al. **expand multiple vertices** via maximizing modularity.
Several algorithms for **detecting global, overlapping communities** use a *greedy*, *agglomerative approach* and run *multiple separate seed set expansions*. Lancichinetti et al. run **greedy seed set expansions**, each with a *single seed vertex*. Overlapping communities are produced by a sequentially running expansions from a node not yet in a community. Lee et al. use **maximal cliques as seed sets**. Havemann et al. **greedily expand cliques**.
The authors of this paper discuss a dynamic approach for **community detection using seed set expansion**. Simply marking the neighbours of changed vertices is a **naive approach**, and has *severe shortcomings*. This is because *communities can split apart*. The simple updating method *may fail even when it outputs a valid community* in the graph.
Scalable Static and Dynamic Community Detection Using Grappolo : NOTES
A **community** (in a network) is a subset of nodes which are _strongly connected among themselves_, but _weakly connected to others_. Neither the number of output communities nor their size distribution is known a priori. Community detection methods can be divisive or agglomerative. **Divisive methods** use _betweeness centrality_ to **identify and remove bridges** between communities. **Agglomerative methods** greedily **merge two communities** that provide maximum gain in _modularity_. Newman and Girvan have introduced the **modularity metric**. The problem of community detection is then reduced to the problem of modularity maximization which is **NP-complete**. **Louvain method** is a variant of the _agglomerative strategy_, in that is a _multi-level heuristic_.
https://gist.github.com/wolfram77/917a1a4a429e89a0f2a1911cea56314d
In this paper, the authors discuss **four heuristics** for Community detection using the _Louvain algorithm_ implemented upon recently developed **Grappolo**, which is a parallel variant of the Louvain algorithm. They are:
- Vertex following and Minimum label
- Data caching
- Graph coloring
- Threshold scaling
With the **Vertex following** heuristic, the _input is preprocessed_ and all single-degree vertices are merged with their corresponding neighbours. This helps reduce the number of vertices considered in each iteration, and also help initial seeds of communities to be formed. With the **Minimum label heuristic**, when a vertex is making the decision to move to a community and multiple communities provided the same modularity gain, the community with the smallest id is chosen. This helps _minimize or prevent community swaps_. With the **Data caching** heuristic, community information is stored in a vector instead of a map, and is reused in each iteration, but with some additional cost. With the **Vertex ordering via Graph coloring** heuristic, _distance-k coloring_ of graphs is performed in order to group vertices into colors. Then, each set of vertices (by color) is processed _concurrently_, and synchronization is performed after that. This enables us to mimic the behaviour of the serial algorithm. Finally, with the **Threshold scaling** heuristic, _successively smaller values of modularity threshold_ are used as the algorithm progresses. This allows the algorithm to converge faster, and it has been observed a good modularity score as well.
From the results, it appears that _graph coloring_ and _threshold scaling_ heuristics do not always provide a speedup and this depends upon the nature of the graph. It would be interesting to compare the heuristics against baseline approaches. Future work can include _distributed memory implementations_, and _community detection on streaming graphs_.
Application Areas of Community Detection: A Review : NOTES
This is a short review of Community detection methods (on graphs), and their applications. A **community** is a subset of a network whose members are *highly connected*, but *loosely connected* to others outside their community. Different community detection methods *can return differing communities* these algorithms are **heuristic-based**. **Dynamic community detection** involves tracking the *evolution of community structure* over time.
https://gist.github.com/wolfram77/09e64d6ba3ef080db5558feb2d32fdc0
Communities can be of the following **types**:
- Disjoint
- Overlapping
- Hierarchical
- Local.
The following **static** community detection **methods** exist:
- Spectral-based
- Statistical inference
- Optimization
- Dynamics-based
The following **dynamic** community detection **methods** exist:
- Independent community detection and matching
- Dependent community detection (evolutionary)
- Simultaneous community detection on all snapshots
- Dynamic community detection on temporal networks
**Applications** of community detection include:
- Criminal identification
- Fraud detection
- Criminal activities detection
- Bot detection
- Dynamics of epidemic spreading (dynamic)
- Cancer/tumor detection
- Tissue/organ detection
- Evolution of influence (dynamic)
- Astroturfing
- Customer segmentation
- Recommendation systems
- Social network analysis (both)
- Network summarization
- Privary, group segmentation
- Link prediction (both)
- Community evolution prediction (dynamic, hot field)
<br>
<br>
## References
- [Application Areas of Community Detection: A Review : PAPER](https://ieeexplore.ieee.org/document/8625349)
Community Detection on the GPU : NOTES
This paper discusses a GPU implementation of the Louvain community detection algorithm. Louvain algorithm obtains hierachical communities as a dendrogram through modularity optimization. Given an undirected weighted graph, all vertices are first considered to be their own communities. In the first phase, each vertex greedily decides to move to the community of one of its neighbours which gives greatest increase in modularity. If moving to no neighbour's community leads to an increase in modularity, the vertex chooses to stay with its own community. This is done sequentially for all the vertices. If the total change in modularity is more than a certain threshold, this phase is repeated. Once this local moving phase is complete, all vertices have formed their first hierarchy of communities. The next phase is called the aggregation phase, where all the vertices belonging to a community are collapsed into a single super-vertex, such that edges between communities are represented as edges between respective super-vertices (edge weights are combined), and edges within each community are represented as self-loops in respective super-vertices (again, edge weights are combined). Together, the local moving and the aggregation phases constitute a stage. This super-vertex graph is then used as input fof the next stage. This process continues until the increase in modularity is below a certain threshold. As a result from each stage, we have a hierarchy of community memberships for each vertex as a dendrogram.
Approaches to perform the Louvain algorithm can be divided into coarse-grained and fine-grained. Coarse-grained approaches process a set of vertices in parallel, while fine-grained approaches process all vertices in parallel. A coarse-grained hybrid-GPU algorithm using multi GPUs has be implemented by Cheong et al. which grabbed my attention. In addition, their algorithm does not use hashing for the local moving phase, but instead sorts each neighbour list based on the community id of each vertex.
https://gist.github.com/wolfram77/7e72c9b8c18c18ab908ae76262099329
Survey for extra-child-process package : NOTES
Useful additions to inbuilt child_process module.
📦 Node.js, 📜 Files, 📰 Docs.
Please see attached PDF for literature survey.
https://gist.github.com/wolfram77/d936da570d7bf73f95d1513d4368573e
Dynamic Batch Parallel Algorithms for Updating PageRank : POSTER
This paper presents two algorithms for efficiently computing PageRank on dynamically updating graphs in a batched manner: DynamicLevelwisePR and DynamicMonolithicPR. DynamicLevelwisePR processes vertices level-by-level based on strongly connected components and avoids recomputing converged vertices on the CPU. DynamicMonolithicPR uses a full power iteration approach on the GPU that partitions vertices by in-degree and skips unaffected vertices. Evaluation on real-world graphs shows the batched algorithms provide speedups of up to 4000x over single-edge updates and outperform other state-of-the-art dynamic PageRank algorithms.
Abstract for IPDPS 2022 PhD Forum on Dynamic Batch Parallel Algorithms for Up...
For the PhD forum an abstract submission is required by 10th May, and poster by 15th May. The event is on 30th May.
https://gist.github.com/wolfram77/1c1f730d20b51e0d2c6d477fd3713024
Fast Incremental Community Detection on Dynamic Graphs : NOTES
In this paper, the authors describe two approaches for dynamic community detection using the CNM algorithm. CNM is a hierarchical, agglomerative algorithm that greedily maximizes modularity. They define two approaches: BasicDyn and FastDyn. BasicDyn backtracks merges of communities until each marked (changed) vertex is its own singleton community. FastDyn undoes a merge only if the quality of merge, as measured by the induced change in modularity, has significantly decreased compared to when the merge initially took place. FastDyn also allows more than two vertices to contract together if in the previous time step these vertices eventually ended up contracted in the same community. In the static case, merging several vertices together in one contraction phase could lead to deteriorating results. FastDyn is able to do this, however, because it uses information from the merges of the previous time step. Intuitively, merges that previously occurred are more likely to be acceptable later.
https://gist.github.com/wolfram77/1856b108334cc822cdddfdfa7334792a
More from Subhajit Sahu (20)
About TrueTime, Spanner, Clock synchronization, CAP theorem, Two-phase lockin...
About TrueTime, Spanner, Clock synchronization, CAP theorem, Two-phase lockin...
Levelwise PageRank with Loop-Based Dead End Handling Strategy : SHORT REPORT ...
Levelwise PageRank with Loop-Based Dead End Handling Strategy : SHORT REPORT ...
Algorithmic optimizations for Dynamic Levelwise PageRank (from STICD) : SHORT...
Algorithmic optimizations for Dynamic Levelwise PageRank (from STICD) : SHORT...
Adjusting primitives for graph : SHORT REPORT / NOTES
Adjusting primitives for graph : SHORT REPORT / NOTES
Experiments with Primitive operations : SHORT REPORT / NOTES
Experiments with Primitive operations : SHORT REPORT / NOTES
Algorithmic optimizations for Dynamic Monolithic PageRank (from STICD) : SHOR...
Algorithmic optimizations for Dynamic Monolithic PageRank (from STICD) : SHOR...
word2vec, node2vec, graph2vec, X2vec: Towards a Theory of Vector Embeddings o...
word2vec, node2vec, graph2vec, X2vec: Towards a Theory of Vector Embeddings o...
DyGraph: A Dynamic Graph Generator and Benchmark Suite : NOTES
DyGraph: A Dynamic Graph Generator and Benchmark Suite : NOTES
A Dynamic Algorithm for Local Community Detection in Graphs : NOTES
A Dynamic Algorithm for Local Community Detection in Graphs : NOTES
Scalable Static and Dynamic Community Detection Using Grappolo : NOTES
Scalable Static and Dynamic Community Detection Using Grappolo : NOTES
Application Areas of Community Detection: A Review : NOTES
Application Areas of Community Detection: A Review : NOTES
Dynamic Batch Parallel Algorithms for Updating PageRank : POSTER
Dynamic Batch Parallel Algorithms for Updating PageRank : POSTER
Abstract for IPDPS 2022 PhD Forum on Dynamic Batch Parallel Algorithms for Up...
Abstract for IPDPS 2022 PhD Forum on Dynamic Batch Parallel Algorithms for Up...
Fast Incremental Community Detection on Dynamic Graphs : NOTES
Fast Incremental Community Detection on Dynamic Graphs : NOTES
Recently uploaded
按照学校原版(Greenwich文凭证书)格林威治大学毕业证快速办理
出售买大学文凭【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Adelaide文凭证书)阿德莱德大学毕业证快速办理
怎样办理复制【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UAL文凭证书)伦敦艺术大学毕业证快速办理
出售假学位证【微信:176555708】【(UAL毕业证书)伦敦艺术大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
学校原版办理海外认证【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
加急办理美国南加州大学毕业证文凭毕业证原版一模一样
原版一模一样【微信：741003700 】【美国南加州大学毕业证文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(AU文凭证书)英国阿伯丁大学毕业证快速办理
出售毕业典礼【微信:176555708】【(AU毕业证书)英国阿伯丁大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UVic文凭证书)维多利亚大学毕业证快速办理
不能毕业办理文凭'毕业证购买'【微信:176555708】【(UVic毕业证书)维多利亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
1比1复刻澳洲皇家墨尔本理工大学毕业证本科学位原版一模一样
原版一模一样【微信：741003700 】【澳洲皇家墨尔本理工大学毕业证本科学位】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
毕业原版【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
买(usyd毕业证书)澳洲悉尼大学毕业证研究生文凭证书原版一模一样
原版定制【微信:bwp0011】《(usyd毕业证书)澳洲悉尼大学毕业证研究生文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
一比一原版(Monash文凭证书)莫纳什大学毕业证如何办理
毕业原版【微信:176555708】【(Monash毕业证书)莫纳什大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(QU文凭证书)皇后大学毕业证快速办理
补办学校邮寄信封【微信:176555708】【(QU毕业证书)皇后大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(USD文凭证书)圣地亚哥大学毕业证快速办理
官方原版办理成绩单ps【微信:176555708】【(USD毕业证书)圣地亚哥大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UOL文凭证书)利物浦大学毕业证如何办理
毕业原版【微信:176555708】【(UOL毕业证书)利物浦大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
SOLIDWORKS 2024 Enhancements eBook.pdf for beginners
Wonder and help in everyway to know in details easily
一比一原版(TheAuckland毕业证书)新西兰奥克兰大学毕业证如何办理
原版定制新西兰奥克兰大学毕业证【微信：176555708】【TheAuckland毕业证书成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
按照学校原版(UPenn文凭证书)宾夕法尼亚大学毕业证快速办理
办理【(UPenn毕业证书)宾夕法尼亚大学毕业证】【176555708微信号】存档可查的成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(SUT文凭证书)斯威本科技大学毕业证快速办理
退学办理电子版【微信:176555708】【(SUT毕业证书)斯威本科技大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Columbia文凭证书)哥伦比亚大学毕业证快速办理
快速办理假学位证【微信:176555708】【(Columbia毕业证书)哥伦比亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Production.pptxd dddddddddddddddddddddddddddddddddd
Production.pptxd dddddddddddddddddddddddddddddddddd
SOLIDWORKS 2024 Enhancements eBook.pdf for beginners
SOLIDWORKS 2024 Enhancements eBook.pdf for beginners
Submarine cables: Indian Perspective
- 1. 406 Submarine Cables Minimum design life of 25 years. Satellites account for 0.37% of all U.S. international capacity. The new MAREA cable is capable of carrying 208 Tbps. Google, Facebook, Microsoft, and Amazon are major investors in new cable. Total 1.2 million km (2020)
- 2. Manufacturing & Deployment • Japanese NEC developed 20 fiber pair (40) cable. (2020) • Google announced a cable with 24 pairs of optical fibers. • Bandwidth of 12-pair Dunant is declared at 250 Tbps. • DWDM allows 100 wavelengths over a single fiber. • Largest manufacturers: • Alcatel Submarine Networks (ASN) (France) • TE SubCom (USA) • Nippon Electric Company (NEC) (Japan) • Prysmian (Italy) • Nexans (France) • Hengtong (China) • Zhongtian (China) Subcom Fiber Optic Cable Kit. Lightweight (LW) > 2000m Special Application (SPA) 900-2000m Light Light-Wire Armored (LWA) Buried Single Armored (SA) 400-900m Double Armored (DA) Beach joint-400m
- 3. 1. Extending 2. Dropping 3. Splicing with other side 4. Dropping
- 4. NEC repeaters with four signal amplifiers are located at the OCC factory in Japan. Alcatel Submarine Networks Optical RepeaterNetwork architecture Cable laying Hydro Jet
- 5. Polynesia submarine cable Installation ship Sea plow for Cable burial Survey ship Maintenance ship
- 6. SEA-ME-WE 3 • The South-East Asia Middle East Western Europe 3. • Length: 39,000km, Capacity: 100G (1999) • Operators: BSNL (92) • CLS: Mumbai (Tata Comm.), Kochi(Tata Comm.) (39) FEA • The FLAG Europe Asia (Fiber-optic Link Around Globe). • Length: 28,000km, Capacity: 80Gbps (1997) • Operators: Global Cloud Xchange(RCOM) (1) • CLS: Chennai (Tata Comm.) (18)
- 7. I2ICN • The i2 Cable Network. • Length: 3,100km, Capacity: 8.4Tbps (2002) • Operators: Bharti Airtel (2) • CLS: Chennai (Airtel) (2) SAFE • The South Africa Far East. • Length: 13,500km, Capacity: 130Gbps (2002) • Operators: Tata Comm. (30) • CLS: Cochin (Tata Comm.) (6)
- 8. TIC • The Tata Indicom Cable. • Length: 3,175km, Capacity: 5.1Tbps (2004) • Operators: Tata Comm. (1) • CLS: Chennai (Tata Comm.) (2) SEA-ME-WE 4 • The South East Asia-Middle East-West Europe 4. • Length: 18,800km (4), Capacity: 4.6Tbps (2005) • Operators: Tata Comm., Bharti Infotel(16) • CLS: Mumbai (Airtel), Chennai (Airtel) (17)
- 9. BLCS • The Bharat Lanka Cable System. • Length: 320km, Capacity: 1Tbps (2006) • Operators: BSNL (2) • CLS: Tuticorin (Reliance) (2) FALCON • The FLAG Alcatel-Lucent Optical Network. • Length: 11,859km, Capacity: 2.56Tbps (2006) • Operators: Global Cloud eXchange (16) • CLS: Mumbai (Reliance) (17)
- 10. SEACOM • The SEACOM Cable. • Length: 17,000km, Capacity: 1.5Tbps (2009) • Operators: (5) • CLS: Mumbai (Tata Comm. / VSNL) (9) IMEWE • The India Middle-East Western-Europe. • Length: 12,091km, Capacity: 5.6Tbps (2010) • Operators: Bharti Airtel, Tata Comm. (9) • CLS: Mumbai (Tata Comm.) (10)
- 11. EIG • The Europe India Gateway. • Length: 15,000km (4), Capacity: 3.8Tbps (2011) • Operators: Bharti Airtel, BSNL (16) • CLS: Mumbai (Airtel) (12) TGN-EA • The Tata Global Network-Eurasia. • Length: 9,280km, Capacity: 1.28Tbps (2012) • Operators: Tata Comm. (1) (RTD: 92ms) • CLS: Mumbai (Tata Comm. / VSNL) (5)
- 12. GIBY • The Gulf Bridge International. • Length: ?km, Capacity: 5.6Tbps (2012) • Operators: Bharti Airtel (?) • CLS: Mumbai (Sify Tech.) (10) MENA • The Middle East North Africa. • Length: 8,800km, Capacity: 5.8Tbps (2014) • Operators: Bharti Airtel (?) • CLS: Mumbai (Sify Tech.) (7)
- 13. CANI • The Chennai - Andaman and Nicobar Islands. • Length: 2300km, Capacity: 6.4Tbps x 4 (Aug 2020) • Operators: BSNL (?), Cost: 1224 Cr. • CLS: (9), Handled by: NEC Corp. (Japan)
- 14. Cable Landing Stations in India GCX: Reliance Globalcom B.V. IOX: India Ocean eXchange
- 16. Landing of an Italy-USA cable (4,704 nautical miles long), on the Rockoway beach, New-York, January 1925.