This document summarizes a study on stormwater management in Pimpari Chinchwad city in India using Geographic Information Systems (GIS). It finds that rapid urbanization and increased impervious surfaces have led to a 60% increase in surface runoff over the past two decades. This increased runoff is overwhelming the city's drainage system and causing more frequent urban flooding. The study uses GIS to analyze land use/land cover change over time and identify vulnerable flood-prone areas. It proposes sustainable stormwater management techniques like retention ponds, infiltration trenches, and pervious pavement to reduce runoff and curb future flooding in the city.
Assessment and Analysis of Maximum Precipitation at Bharkawada Village, Palan...RSIS International
Efficient Storm water network is the main tool to prevent the water gatheration and scattering of a city. Selecting the Bharkawada as study area and its problem was identified to be of very less effective drainage system. In this study methods have been adopted to identify the possibilities of completing the research for designing the storm water drainage design. Our main aim is to design a very efficient and rpid drainage system which should drain the water very fastly with less concentration time and less spreading of water with less provision of slope. The present design is based on rainfall data. Past 30 years rainfall data has been taken for study. The system has been designed considering in total of 65% of the impervious area. Estimated rainfall intensity has been calculated as 33.02527 mm/hour with a recurrence interval of 2 years from the detailed analysis of rainfall data of 34 years. Rainfall Intensity is estimated after frequency analysis of the rainfall data. The calculated runoff is 25.056 m3/s, which can be used as a design discharge for network designing. Different methods can be used for runoff estimation. Here, Rational method seems to be best for use in estimation of storm water runoff. The outfalls of system are directed to proposed lakes. Ere at this stage rainfall calculations have been done and in future work complete rainfall and runoff analysis will be carried out for storm water network.
Evaluation of Non-structural and Structural Flood Management MeasuresAM Publications
The flooding can have ruinous impacts on the society and the environment. The cities are mostly located
on the banks of rivers, coasts or in the valleys.Urbanisation leads to developed catchments which are densly populated
and are centres of economic activities with vital infrasturcture. The loss of assets is directly related with flood
exposure.The thorough knowledge of flood exposure helps in developing effctive flood management measures. In the
present study flood exposure analyses is performed by using GIS tool. The landuse and flood map data is integrated in
GIS framework to develope flood exposure map. Flood exposure map can be used to compute the flood losses at
different locations in the watershed.The existing non-structrual flood management measures are evaluated using the
flood losses.To protect the lives and properties, structural flood management measure is proposed and evaluated.The
proposed methodology is developed for Upper Godavari basin of Nashik city in Maharashtra of India
Drainage Condition in Water Logged Areas of Central Part in Chittagong City ...inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Assessment and Analysis of Maximum Precipitation at Bharkawada Village, Palan...RSIS International
Efficient Storm water network is the main tool to prevent the water gatheration and scattering of a city. Selecting the Bharkawada as study area and its problem was identified to be of very less effective drainage system. In this study methods have been adopted to identify the possibilities of completing the research for designing the storm water drainage design. Our main aim is to design a very efficient and rpid drainage system which should drain the water very fastly with less concentration time and less spreading of water with less provision of slope. The present design is based on rainfall data. Past 30 years rainfall data has been taken for study. The system has been designed considering in total of 65% of the impervious area. Estimated rainfall intensity has been calculated as 33.02527 mm/hour with a recurrence interval of 2 years from the detailed analysis of rainfall data of 34 years. Rainfall Intensity is estimated after frequency analysis of the rainfall data. The calculated runoff is 25.056 m3/s, which can be used as a design discharge for network designing. Different methods can be used for runoff estimation. Here, Rational method seems to be best for use in estimation of storm water runoff. The outfalls of system are directed to proposed lakes. Ere at this stage rainfall calculations have been done and in future work complete rainfall and runoff analysis will be carried out for storm water network.
Evaluation of Non-structural and Structural Flood Management MeasuresAM Publications
The flooding can have ruinous impacts on the society and the environment. The cities are mostly located
on the banks of rivers, coasts or in the valleys.Urbanisation leads to developed catchments which are densly populated
and are centres of economic activities with vital infrasturcture. The loss of assets is directly related with flood
exposure.The thorough knowledge of flood exposure helps in developing effctive flood management measures. In the
present study flood exposure analyses is performed by using GIS tool. The landuse and flood map data is integrated in
GIS framework to develope flood exposure map. Flood exposure map can be used to compute the flood losses at
different locations in the watershed.The existing non-structrual flood management measures are evaluated using the
flood losses.To protect the lives and properties, structural flood management measure is proposed and evaluated.The
proposed methodology is developed for Upper Godavari basin of Nashik city in Maharashtra of India
Drainage Condition in Water Logged Areas of Central Part in Chittagong City ...inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Similar to STORMWATER MANAGEMENT FOR PIMPARI CHICHWAD CITY USING GIS (20)
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.