Steam System Technology Basics
•
1 like•318 views
One day class to provide an overview of the basic steam system from boiler through steam distribution and measurement to point of use and then ultimately back to the boiler.
Report
Share
Report
Share
Download to read offline
Recommended
ASCO Solenoid Valves Catalog
ASCO Solenoid Valves Catalog with detailed specifications to order with complete correct sizes and configuration choices. For reference only. To order, contact Carotek.com
Carotek 2015 Process Solutions Summit brochure
Full details, session content and registration information for Carotek 2015 Process Solutions Summit.
Advanced Heat Exchanger Design, Inspection and Troubleshooting
The design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.
Protonex Sen Design Poster
Protonex, based in Southborough, MA, provides portable proton exchange membrane and solid oxide fuel cells from 100 to 1000 watts. They needed a reliable butane fuel delivery system to expand into commercial markets. A team from UMass Dartmouth designed a system that withdraws liquid butane from a supply canister into an internal ballast. As the ballast fills, vaporized butane is supplied to the fuel cell. When full, liquid butane goes directly to an in-line vaporizer. The system maintains isothermal fuel supply and automatically shuts down using the ballast if cans are evacuated. Testing confirmed the design's fuel vaporization and ballast filling capabilities. The integrated prototype successfully operated a Pro
2014 boiler session_all
This document provides information about a boiler inspection seminar series hosted by Alstom Power Inc. Session 1 focuses on boiler inspection fundamentals and will cover common boiler designs, stresses, and inspection plans. The seminar is aimed at maintenance, engineering, and operations personnel and will discuss various boiler systems and failure mechanisms. It will be held on June 2-3, 2014 in Chattanooga, Tennessee and include presentations, discussions, and a tour of Alstom's materials testing center.
Velocys ppt140813_ENFL-ACS_2014
This document summarizes the commercialization of Velocys' advanced Fischer-Tropsch synthesis technology. Key points include:
Velocys has 15+ years of experience and over $300 million invested in developing their microchannel reactor technology. Their pilot plant demonstrates stable long-term operation with excellent catalyst regenerability and lifetime. Their process is designed for modular scalability.
Velocys works with world-class partners and has commercial rollout underway, with resources including technical centers and a permanent pilot plant. Their technology offers advantages including isothermal behavior, robustness, economy, and high productivity.
Experimental design and validation ensure the catalyst and process meet commercial requirements for stability, performance, and tolerance to variations
Design and simulation of a multiple effect evaporator using vapor bleeding
This document describes the development of a model for a five-effect evaporator system used for concentrating sugar solution. The objective is to model vapor bleeding, an energy reduction scheme, to reduce steam consumption. Mass and energy balance equations are developed and solved using the Newton-Raphson method in MATLAB. First, the model is solved without bleeding to obtain the steam requirement. It is then solved with bleeding incorporated, requiring additional heat exchangers. Vapor bleeding provides a 26% reduction in steam usage but requires $150,291 for five extra heat exchangers. Annual steam cost savings of $43,200 provide a payback period of 2 years 5 months.
Model 500 series manual
The document describes the Apex Instruments Model XC-500 Series isokinetic source sampling system. It provides an overview of the key components of the system including the source sampler console, electrical subsystem, thermocouple subsystem, vacuum subsystem, external vacuum pump unit, probe assembly, modular sample case, umbilical cable, and glassware sample train. It also describes the operating procedures, test design, site preparation, sampling methods, calibration procedures, and maintenance for the system. The system is applicable for performing isokinetic testing and sampling for various pollutants according to EPA reference methods.
Recommended
ASCO Solenoid Valves Catalog
ASCO Solenoid Valves Catalog with detailed specifications to order with complete correct sizes and configuration choices. For reference only. To order, contact Carotek.com
Carotek 2015 Process Solutions Summit brochure
Full details, session content and registration information for Carotek 2015 Process Solutions Summit.
Advanced Heat Exchanger Design, Inspection and Troubleshooting
The design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.
Protonex Sen Design Poster
Protonex, based in Southborough, MA, provides portable proton exchange membrane and solid oxide fuel cells from 100 to 1000 watts. They needed a reliable butane fuel delivery system to expand into commercial markets. A team from UMass Dartmouth designed a system that withdraws liquid butane from a supply canister into an internal ballast. As the ballast fills, vaporized butane is supplied to the fuel cell. When full, liquid butane goes directly to an in-line vaporizer. The system maintains isothermal fuel supply and automatically shuts down using the ballast if cans are evacuated. Testing confirmed the design's fuel vaporization and ballast filling capabilities. The integrated prototype successfully operated a Pro
2014 boiler session_all
This document provides information about a boiler inspection seminar series hosted by Alstom Power Inc. Session 1 focuses on boiler inspection fundamentals and will cover common boiler designs, stresses, and inspection plans. The seminar is aimed at maintenance, engineering, and operations personnel and will discuss various boiler systems and failure mechanisms. It will be held on June 2-3, 2014 in Chattanooga, Tennessee and include presentations, discussions, and a tour of Alstom's materials testing center.
Velocys ppt140813_ENFL-ACS_2014
This document summarizes the commercialization of Velocys' advanced Fischer-Tropsch synthesis technology. Key points include:
Velocys has 15+ years of experience and over $300 million invested in developing their microchannel reactor technology. Their pilot plant demonstrates stable long-term operation with excellent catalyst regenerability and lifetime. Their process is designed for modular scalability.
Velocys works with world-class partners and has commercial rollout underway, with resources including technical centers and a permanent pilot plant. Their technology offers advantages including isothermal behavior, robustness, economy, and high productivity.
Experimental design and validation ensure the catalyst and process meet commercial requirements for stability, performance, and tolerance to variations
Design and simulation of a multiple effect evaporator using vapor bleeding
This document describes the development of a model for a five-effect evaporator system used for concentrating sugar solution. The objective is to model vapor bleeding, an energy reduction scheme, to reduce steam consumption. Mass and energy balance equations are developed and solved using the Newton-Raphson method in MATLAB. First, the model is solved without bleeding to obtain the steam requirement. It is then solved with bleeding incorporated, requiring additional heat exchangers. Vapor bleeding provides a 26% reduction in steam usage but requires $150,291 for five extra heat exchangers. Annual steam cost savings of $43,200 provide a payback period of 2 years 5 months.
Model 500 series manual
The document describes the Apex Instruments Model XC-500 Series isokinetic source sampling system. It provides an overview of the key components of the system including the source sampler console, electrical subsystem, thermocouple subsystem, vacuum subsystem, external vacuum pump unit, probe assembly, modular sample case, umbilical cable, and glassware sample train. It also describes the operating procedures, test design, site preparation, sampling methods, calibration procedures, and maintenance for the system. The system is applicable for performing isokinetic testing and sampling for various pollutants according to EPA reference methods.
Energy
The document provides an overview of ASME Performance Test Codes (PTCs) which are technical standards for testing power generation and other industrial equipment. It discusses that ASME has over 100 years of experience developing PTCs and currently offers 48 codes covering areas like power production, combustion, fluid handling, and emissions. The codes provide uniform testing procedures and protocols to ensure accurate, precise, and reliable test results. Participating on the PTC committees allows volunteers from industry to contribute their expertise to developing standards that meet the needs of different stakeholders.
Quality assurance maintenance of hvac system in pharmaceutical industry
The document discusses quality assurance maintenance of HVAC systems. It describes the importance of regularly maintaining HVAC systems to ensure consistent performance and longevity. Key aspects of HVAC maintenance include inspecting and changing air filters, cleaning debris, checking refrigerant levels, and lubricating moving parts. The document provides tips for maintenance schedules and lists 30 points to check during maintenance.
Liquid & Gas Flowmetering & Custody Measurement
This course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems and their associated supporting equipment. It will address these points in relation to both single- and multi-phase flows and will give guidance on the optimum commercially available flowmeters through a detailed comparison of their relative merits. Flowmeter calibration is crucial to these topics.
The course also covers the related issues of level and tank measurement as well as lease automatic custody transfer and truck custody transfer, leak detection, loss control and monitor and control production losses.
thermal-plant-report-mechatronics.pdf
This document provides a summary of a student's 6-week summer training report at the Panipat Thermal Power Station (PTPS) in India. It discusses the key components and processes at the power plant, including the boiler, turbine, generator, condenser, cooling tower, electrostatic precipitator, ash handling plant, and switchyard. The document also provides an overview of the three main inputs to the power station - water, fuel, and coal - and explains how coal is converted to steam, steam is converted to mechanical power via the turbine, and electricity is generated and transmitted from the power plant.
PetroSync - Chemically Enhanced Water Alternating Gas
It is know that two-third of the original oil in place are still in the ground. Petroleum companies are looking for techniques to improve sweep efficiency and increase recovery factors. As a result, Enhanced Oil Recovery (EOR) processes need to be carried out. Successful WAG floods can yield 5-20% additional oil recovery over waterflood because of improved microscopic displacement efficiency by the solvent coupled with improving areal and vertical sweep efficiency.
High performance liquid chromatography
This presentation involves all d information about HPLC and its important components useful in academic sessions.
American Ecotech VOC PAMS Webinar
3 Tips on How to Simplify VOC Monitoring and Set Up a Successful Network.
What will you learn from the Webinar?
1. Mistakes when setting up a calibration system.
2. Using communications with the GC monitors.
3. GC pre-concentrator management maintenance and functions.
Whether your monitoring requirements to meet VOC emissions standards from the EPA are simply for BTEX, a C6 - C12 range, or even a full range, discover how American Ecotech can provide a complete solution that will give you consistent, precise, and reliable results to meet any specific VOC requirements.
Project Report on Analysis of Boiler- Aditya
The document describes the scope of work required to repair and re-establish a condemned boiler. It includes dismantling and analyzing the boiler and accessories to identify defects. The economizer and other parts showed corrosion and damage and needed replacement. Pressure testing of ducts and pipelines was also performed after repairs. The overall work aimed to refurbish the boiler so it could safely generate steam again for industrial processes.
High Pressure Liquid Chromatography and It's Application
detailed study about the study of high pressure liquid chromatography
Drum level
This document discusses improving boiler room efficiencies through better boiler drum level measurement and control. It describes different methods of liquid level measurement including inferential, volumetric, and differential pressure measurements. It also discusses different strategies for controlling boiler drum level, including single-element, two-element, and three-element control systems. Maintaining proper boiler drum level and feedwater temperature is important for optimizing boiler performance and efficiency.
Practical Boiler Control & Instrumentation for Engineers & Technicians
This document provides an introduction to boiler controls, including:
1) It outlines the key objectives of boiler control systems which are to ensure safety, availability, and performance through reliable controls, robust safety systems, efficient operation, and more.
2) It presents a simplified view of the boiler combustion and steam generation processes to provide background for control systems.
3) It introduces the main control functions for boilers, mapping them out according to safety, availability, and performance objectives.
Separatore pa 605
The PA purifier system is designed to purify and clarify heavy fuel oils, lubricating oils, and distillate oils for marine vessels and power plants. It consists of a separator, change-over valve, and EPC50 control unit which automatically operates the system. The compact system takes up little space and requires few ancillary components, keeping installation and maintenance costs low. It effectively separates sludge and water from oils with high throughput capacities.
Energy Research Centre
The Varkaus campus Energy Research Centre of Savonia University of Applied Sciences conducts energy research and testing services. It has facilities to test the combustion and emissions of various fuels in fluidized bed and grate boilers. This includes a 300kW fluidized bed boiler and a 500kW pyrolysis oil burner system. The Centre also provides material testing, corrosion testing, fuel analyses, and training services. It aims to contribute to the energy expertise in the region and support energy companies.
Basic controls for boilers
1. Boilers work by transferring heat from a fuel source like gas or coal to water to create steam, which can be used for various industrial processes.
2. There are two main types of boilers - firetube boilers where hot gases pass through tubes in the boiler shell, and watertube boilers where tubes containing water are surrounded by hot gases.
3. Boiler controls are needed to increase uptime, reduce emissions, maintain safety, and control costs. Controls regulate combustion, feedwater levels, steam pressure and temperature.
CEMS pre 1.pdf
The document discusses continuous emission monitoring systems (CEMS). It describes CEMS as equipment used to continuously determine the concentration of gas or particulate matter emissions from stationary sources like smokestacks. It outlines different types of CEMS including extractive systems that withdraw gas samples and in-situ systems that perform measurements inside the stack. Common CEMS technologies are also summarized, such as extractive, dilution, and in-situ systems. Key aspects of CEMS calibration and its importance are highlighted.
E+H - Proof testing level instruments
Partial proof testing of level instruments can save millions while maintaining safety ratings. It involves exercising the instrument to test for dangerous undetected failures without removing it from the process. This reduces costs compared to full proof testing which requires removal. A partial test every year can extend the time between full tests to 12 years, saving over $1 million in lost production and disposal costs. Selecting instruments that enable effective partial testing helps facilities easily meet safety standards over the long term.
E+H - inline quality measurement
- Inline instrumentation can supplement lab analysis by providing real-time measurements that allow for immediate corrective actions, reducing production downtime and off-spec product.
- Common inline measurements include mass flow, density, pH, viscosity, conductivity, and more. Using these tools allows plants to closely monitor critical quality factors like disinfectant levels.
- Improved reliability, digital integration capabilities, simplified calibration, and hygienic design have made inline analyzers and instruments more viable for food production settings in recent years.
E+H - Global Offering for LIfe Sciences
The document provides an overview of Endress+Hauser's product offerings for various stages of the life sciences production process including media preparation, fermentation, separation and filtration, chromatography, and water purification. It highlights compliant and reliable process measurement instruments that ensure quality control at each stage. Standardized instrumentation is emphasized to simplify projects and reduce costs while meeting industry regulations and standards. Embedded engineering support and project management services are also summarized as helping customers achieve operational excellence.
E+H brochure - Safe Choice for Food & Beverage
The document describes Endress+Hauser as a supplier of measurement solutions for the food and beverage industry. It outlines their full product portfolio including flow, level, analysis, pressure, temperature and recorder instrumentation. It also discusses their services including calibration, training and maintenance agreements to support customers. The document emphasizes Endress+Hauser's focus on food safety and their work with standards organizations to ensure product certification.
E+H - Making accurate PH measurements
Fred Kohlmann is a product manager at Endress+Hauser who has over 40 years of experience in engineering, design, marketing, and sales of online water quality and process control instrumentation. He has taught courses and authored numerous articles on pH, ORP, and conductivity measurements. In this article, he argues that using three pH sensors and averaging the readings from the two closest sensors provides the most accurate pH measurement for industrial processes. This approach helps account for differences between sensors and ensures that an outlier reading from a potentially fouled sensor does not skew the average measurement.
E+H Life Sciences Magazine May 2015
GTec relies on digital Memosens conductivity sensors from Endress+Hauser in its water treatment plants. The sensors provide increased benefits like more accurate calibration, longer operating life, and reduced costs. GTec achieves a high level of automation in its plants, which provides additional benefits to customers like remote monitoring. Endress+Hauser is seen as a versatile supplier that can handle important measurement parameters completely and reliably.
E+H-Transmitter sensor matching improves RTD accuracy
Transmitter-sensor matching improves RTD accuracy by programming a transmitter with calibration coefficients unique to a specific RTD sensor. This eliminates errors caused by the ideal resistance-temperature curve not matching an individual RTD's actual performance. Transmitter-sensor matching can improve temperature measurement accuracy for critical control applications up to 0.8°C by linearizing the transmitter's output based on the RTD's unique calibration curve, rather than assuming it follows the standard ideal curve. Replacing an RTD requires reprogramming the transmitter with new calibration coefficients to maintain the accuracy benefits of transmitter-sensor matching.
More Related Content
Similar to Steam System Technology Basics
Energy
The document provides an overview of ASME Performance Test Codes (PTCs) which are technical standards for testing power generation and other industrial equipment. It discusses that ASME has over 100 years of experience developing PTCs and currently offers 48 codes covering areas like power production, combustion, fluid handling, and emissions. The codes provide uniform testing procedures and protocols to ensure accurate, precise, and reliable test results. Participating on the PTC committees allows volunteers from industry to contribute their expertise to developing standards that meet the needs of different stakeholders.
Quality assurance maintenance of hvac system in pharmaceutical industry
The document discusses quality assurance maintenance of HVAC systems. It describes the importance of regularly maintaining HVAC systems to ensure consistent performance and longevity. Key aspects of HVAC maintenance include inspecting and changing air filters, cleaning debris, checking refrigerant levels, and lubricating moving parts. The document provides tips for maintenance schedules and lists 30 points to check during maintenance.
Liquid & Gas Flowmetering & Custody Measurement
This course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems and their associated supporting equipment. It will address these points in relation to both single- and multi-phase flows and will give guidance on the optimum commercially available flowmeters through a detailed comparison of their relative merits. Flowmeter calibration is crucial to these topics.
The course also covers the related issues of level and tank measurement as well as lease automatic custody transfer and truck custody transfer, leak detection, loss control and monitor and control production losses.
thermal-plant-report-mechatronics.pdf
This document provides a summary of a student's 6-week summer training report at the Panipat Thermal Power Station (PTPS) in India. It discusses the key components and processes at the power plant, including the boiler, turbine, generator, condenser, cooling tower, electrostatic precipitator, ash handling plant, and switchyard. The document also provides an overview of the three main inputs to the power station - water, fuel, and coal - and explains how coal is converted to steam, steam is converted to mechanical power via the turbine, and electricity is generated and transmitted from the power plant.
PetroSync - Chemically Enhanced Water Alternating Gas
It is know that two-third of the original oil in place are still in the ground. Petroleum companies are looking for techniques to improve sweep efficiency and increase recovery factors. As a result, Enhanced Oil Recovery (EOR) processes need to be carried out. Successful WAG floods can yield 5-20% additional oil recovery over waterflood because of improved microscopic displacement efficiency by the solvent coupled with improving areal and vertical sweep efficiency.
High performance liquid chromatography
This presentation involves all d information about HPLC and its important components useful in academic sessions.
American Ecotech VOC PAMS Webinar
3 Tips on How to Simplify VOC Monitoring and Set Up a Successful Network.
What will you learn from the Webinar?
1. Mistakes when setting up a calibration system.
2. Using communications with the GC monitors.
3. GC pre-concentrator management maintenance and functions.
Whether your monitoring requirements to meet VOC emissions standards from the EPA are simply for BTEX, a C6 - C12 range, or even a full range, discover how American Ecotech can provide a complete solution that will give you consistent, precise, and reliable results to meet any specific VOC requirements.
Project Report on Analysis of Boiler- Aditya
The document describes the scope of work required to repair and re-establish a condemned boiler. It includes dismantling and analyzing the boiler and accessories to identify defects. The economizer and other parts showed corrosion and damage and needed replacement. Pressure testing of ducts and pipelines was also performed after repairs. The overall work aimed to refurbish the boiler so it could safely generate steam again for industrial processes.
High Pressure Liquid Chromatography and It's Application
detailed study about the study of high pressure liquid chromatography
Drum level
This document discusses improving boiler room efficiencies through better boiler drum level measurement and control. It describes different methods of liquid level measurement including inferential, volumetric, and differential pressure measurements. It also discusses different strategies for controlling boiler drum level, including single-element, two-element, and three-element control systems. Maintaining proper boiler drum level and feedwater temperature is important for optimizing boiler performance and efficiency.
Practical Boiler Control & Instrumentation for Engineers & Technicians
This document provides an introduction to boiler controls, including:
1) It outlines the key objectives of boiler control systems which are to ensure safety, availability, and performance through reliable controls, robust safety systems, efficient operation, and more.
2) It presents a simplified view of the boiler combustion and steam generation processes to provide background for control systems.
3) It introduces the main control functions for boilers, mapping them out according to safety, availability, and performance objectives.
Separatore pa 605
The PA purifier system is designed to purify and clarify heavy fuel oils, lubricating oils, and distillate oils for marine vessels and power plants. It consists of a separator, change-over valve, and EPC50 control unit which automatically operates the system. The compact system takes up little space and requires few ancillary components, keeping installation and maintenance costs low. It effectively separates sludge and water from oils with high throughput capacities.
Energy Research Centre
The Varkaus campus Energy Research Centre of Savonia University of Applied Sciences conducts energy research and testing services. It has facilities to test the combustion and emissions of various fuels in fluidized bed and grate boilers. This includes a 300kW fluidized bed boiler and a 500kW pyrolysis oil burner system. The Centre also provides material testing, corrosion testing, fuel analyses, and training services. It aims to contribute to the energy expertise in the region and support energy companies.
Basic controls for boilers
1. Boilers work by transferring heat from a fuel source like gas or coal to water to create steam, which can be used for various industrial processes.
2. There are two main types of boilers - firetube boilers where hot gases pass through tubes in the boiler shell, and watertube boilers where tubes containing water are surrounded by hot gases.
3. Boiler controls are needed to increase uptime, reduce emissions, maintain safety, and control costs. Controls regulate combustion, feedwater levels, steam pressure and temperature.
CEMS pre 1.pdf
The document discusses continuous emission monitoring systems (CEMS). It describes CEMS as equipment used to continuously determine the concentration of gas or particulate matter emissions from stationary sources like smokestacks. It outlines different types of CEMS including extractive systems that withdraw gas samples and in-situ systems that perform measurements inside the stack. Common CEMS technologies are also summarized, such as extractive, dilution, and in-situ systems. Key aspects of CEMS calibration and its importance are highlighted.
Similar to Steam System Technology Basics (15)
Quality assurance maintenance of hvac system in pharmaceutical industry
Quality assurance maintenance of hvac system in pharmaceutical industry
PetroSync - Chemically Enhanced Water Alternating Gas
PetroSync - Chemically Enhanced Water Alternating Gas
High Pressure Liquid Chromatography and It's Application
High Pressure Liquid Chromatography and It's Application
Practical Boiler Control & Instrumentation for Engineers & Technicians
Practical Boiler Control & Instrumentation for Engineers & Technicians
More from Carotek
E+H - Proof testing level instruments
Partial proof testing of level instruments can save millions while maintaining safety ratings. It involves exercising the instrument to test for dangerous undetected failures without removing it from the process. This reduces costs compared to full proof testing which requires removal. A partial test every year can extend the time between full tests to 12 years, saving over $1 million in lost production and disposal costs. Selecting instruments that enable effective partial testing helps facilities easily meet safety standards over the long term.
E+H - inline quality measurement
- Inline instrumentation can supplement lab analysis by providing real-time measurements that allow for immediate corrective actions, reducing production downtime and off-spec product.
- Common inline measurements include mass flow, density, pH, viscosity, conductivity, and more. Using these tools allows plants to closely monitor critical quality factors like disinfectant levels.
- Improved reliability, digital integration capabilities, simplified calibration, and hygienic design have made inline analyzers and instruments more viable for food production settings in recent years.
E+H - Global Offering for LIfe Sciences
The document provides an overview of Endress+Hauser's product offerings for various stages of the life sciences production process including media preparation, fermentation, separation and filtration, chromatography, and water purification. It highlights compliant and reliable process measurement instruments that ensure quality control at each stage. Standardized instrumentation is emphasized to simplify projects and reduce costs while meeting industry regulations and standards. Embedded engineering support and project management services are also summarized as helping customers achieve operational excellence.
E+H brochure - Safe Choice for Food & Beverage
The document describes Endress+Hauser as a supplier of measurement solutions for the food and beverage industry. It outlines their full product portfolio including flow, level, analysis, pressure, temperature and recorder instrumentation. It also discusses their services including calibration, training and maintenance agreements to support customers. The document emphasizes Endress+Hauser's focus on food safety and their work with standards organizations to ensure product certification.
E+H - Making accurate PH measurements
Fred Kohlmann is a product manager at Endress+Hauser who has over 40 years of experience in engineering, design, marketing, and sales of online water quality and process control instrumentation. He has taught courses and authored numerous articles on pH, ORP, and conductivity measurements. In this article, he argues that using three pH sensors and averaging the readings from the two closest sensors provides the most accurate pH measurement for industrial processes. This approach helps account for differences between sensors and ensures that an outlier reading from a potentially fouled sensor does not skew the average measurement.
E+H Life Sciences Magazine May 2015
GTec relies on digital Memosens conductivity sensors from Endress+Hauser in its water treatment plants. The sensors provide increased benefits like more accurate calibration, longer operating life, and reduced costs. GTec achieves a high level of automation in its plants, which provides additional benefits to customers like remote monitoring. Endress+Hauser is seen as a versatile supplier that can handle important measurement parameters completely and reliably.
E+H-Transmitter sensor matching improves RTD accuracy
Transmitter-sensor matching improves RTD accuracy by programming a transmitter with calibration coefficients unique to a specific RTD sensor. This eliminates errors caused by the ideal resistance-temperature curve not matching an individual RTD's actual performance. Transmitter-sensor matching can improve temperature measurement accuracy for critical control applications up to 0.8°C by linearizing the transmitter's output based on the RTD's unique calibration curve, rather than assuming it follows the standard ideal curve. Replacing an RTD requires reprogramming the transmitter with new calibration coefficients to maintain the accuracy benefits of transmitter-sensor matching.
Whey, Water and CIP Detergent?
Case Study of Clean In Place Savings and Effective phase separation of whey, water and CIP detergent in a cheese plant
2013 usa flotronic pumps brochure
The document describes Flotronic's "One-Nut" air-operated double diaphragm pumps. It highlights the pumps' innovative design which allows for diaphragm replacement in under 15 minutes without disconnecting piping. This significantly reduces maintenance costs compared to traditional pumps. The document provides information on pump performance, materials options, flow rate curves and other specifications to help customers select the appropriate pump for their application.
Viking motor-speed-pumps
1. The document describes Viking's Motor Speed internal gear pump series, which can operate at motor speeds up to 1150 RPM, allowing for direct coupling to motors.
2. Key features include sealed-for-life bearings, mechanical seals, pressure lubricated idler pins, and opposite porting for easy in-line mounting.
3. The pumps are suitable for thin liquids with viscosities up to 25,000 SSU and temperatures from -40 to 350°F, and can handle flows from 1 to 580 GPM and pressures up to 250 PSI.
Asco 8210 Series RedHat Solenoid Valve
This document provides information about pilot operated gas shutoff valves, including:
- The valves are 2-way normally closed and ideal for high pressure commercial and industrial gas burner applications.
- They have brass bodies and can be mounted in any position.
- Specifications are provided for valve dimensions, capabilities, construction references, approvals, electrical information, response times, and standard rebuild kits.
Banner Wireless SureCross 45 brochure
The document describes Banner Engineering's SureCross Wireless Q45 Photoelectric Sensors, which are self-contained wireless sensors that can replace cables for photoelectric sensing applications. They utilize a proprietary wireless network that provides reliable communication between sensors and gateways over long ranges. The Q45 sensors solve challenges like cable replacement, sensing in moving applications, and accessing remote locations.
Hydro vision brochure_acousticflowmeasurement_en
This document provides an overview of HydroVision's acoustic flow measurement products and their applications. It describes HydroVision's range of flow meters that use acoustic technology to measure flow non-intrusively in rivers, channels, pipes, and other water applications. The document highlights key product specifications and features and explains how HydroVision's flow meters can reliably measure flow in various industries such as water supply, wastewater, hydroelectric power, and irrigation.
CIP vs COP - Hygienic Pumps and Meeting Government Regulations - Carotek Proc...
This document discusses trends in clean-in-place (CIP) versus clean-out-of-place (COP) processes in the food and pharmaceutical industries and how these trends impact process equipment selection. It defines CIP and COP, outlines the four parts of a CIP/COP process (chemicals, action, temperature, time), reviews regulations and hygiene requirements in food and pharma, and discusses third-party validation standards like 3-A and EHEDG. Key considerations for hygienic equipment design include materials, surface finish, corners/crevices, drainability, and access for cleaning.
Revealing power quality as a process variable - Carotek Process Solutions Su...
Less unscheduled downtime means more efficiency, more productivity, more profit. Dirty Power is often the unseen culprit, accounting for an estimated 20%-30% of all unexplained stoppages. This session covers ways to diagnose and reduce—and even prevent—Dirty Power events.
Internet of Things - structured approach to the physical plant network - Rock...
The convergence of new technologies that securely connect plant information with enterprise systems can bring greater productivity, better utilization of assets, and improved decision-making to industrial companies. By bridging the gap between factory-level systems and enterprise systems, Rockwell Automation and Cisco can show how the connected enterprise offers ease of use, lower total cost of ownership, and improved operations.
Peerless Pump Prevent Vibration - Carotek Process Solutions Summit
This document summarizes a presentation on vibration control and prevention for vertical turbine pumps. It discusses how excessive vibration can lead to premature wear and failure, and emphasizes the importance of proper installation practices like alignment, leveling of foundations, and piping design to control vibration. Methods of detecting vibration issues like high bearing temperatures or noise are covered. The presentation provides guidance on inspection and remediation steps to address vibration problems.
City of Asheboro Carotek Process Solutions Summit presentation
Learn how the City of Asheboro is meeting government regulations, reducing power consumption, saving on chemical cost by using the proper instrumentation equipment. This leads to real-time data, better monitoring and control methods, cost savings and more for the city.
Viking Pump - 230 hygienic series brochure
The document provides specifications for Viking Pump's Hygienic Series positive displacement pumps, including:
- Capacity ranges from 1 to 6 GPM, pressures from 150 PSI, temperatures from -5°F to 225°F.
- Designed for clean-in-place and clean-out-of-place applications in food, beverage, pharmaceutical and personal care industries.
- Features include sealed bearings, polished internal surfaces, removable components for easy cleaning, and various port options.
Heat tracing installation by Thermon
1. This document provides guidelines for installing an electric heat tracing system on pipes. It describes components of a complete system and procedures for installing heating cables on pipes, elbows, supports, flanges, valves and pumps.
2. Key steps include laying out the cable according to piping layout, allowing extra cable for connections and splicing. Cable is attached to pipes using tape every 12 inches. Additional cable is required on valves, pumps and other areas with increased heat loss.
3. Instructions are given for testing cables upon receipt and completing installation by securing terminations.
More from Carotek (20)
E+H-Transmitter sensor matching improves RTD accuracy
E+H-Transmitter sensor matching improves RTD accuracy
CIP vs COP - Hygienic Pumps and Meeting Government Regulations - Carotek Proc...
CIP vs COP - Hygienic Pumps and Meeting Government Regulations - Carotek Proc...
Revealing power quality as a process variable - Carotek Process Solutions Su...
Revealing power quality as a process variable - Carotek Process Solutions Su...
Internet of Things - structured approach to the physical plant network - Rock...
Internet of Things - structured approach to the physical plant network - Rock...
Peerless Pump Prevent Vibration - Carotek Process Solutions Summit
Peerless Pump Prevent Vibration - Carotek Process Solutions Summit
City of Asheboro Carotek Process Solutions Summit presentation
City of Asheboro Carotek Process Solutions Summit presentation
Recently uploaded
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaAssessment and Planning in Educational technology.pptx
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Recently uploaded (20)
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Assessment and Planning in Educational technology.pptx
Assessment and Planning in Educational technology.pptx
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Steam System Technology Basics
- 1. STEAM SYSTEM BASICS CLASS This one day class will provide an overview of the basic steam system from the Boiler through Steam Distribution and Measurement to Point of Use and then ultimately back to the Boiler. This will be a combination of classroom and live demonstration training. Attendees will be able to learn and see the operation of basic components and system elements such as Pressure Reducing and Control Valves, Steam Meters, Steam Traps, and Condensate Pumps. Who Should Attend Anyone wishing to improve their knowledge of basic steam system operation. Course Outline Basics of Steam Generation Steam Distribution Piping and Pressure Reducing Valves Steam Heat Transfer and Steam Traps Condensate Recovery and Pumps Live Steam Demo Course Date/Time May 5, 2016 8:30 AM – 4:00 Location Carotek, Inc. Matthews NC Cost $225.00 Seats are Limited! Call today! 704-844-1163 Evette Austin