The document provides specifications for Viking Pump's Hygienic Series positive displacement pumps, including:
- Capacity ranges from 1 to 6 GPM, pressures from 150 PSI, temperatures from -5°F to 225°F.
- Designed for clean-in-place and clean-out-of-place applications in food, beverage, pharmaceutical and personal care industries.
- Features include sealed bearings, polished internal surfaces, removable components for easy cleaning, and various port options.
The SANITRX HPX & SANITRX HPX II Rupture Discs can be used in a wide range of sanitary and hygienic applications throughout pharmaceutical, biotech, food, and beverage facilities. SANITRX HPX & SANITRX HPX II Rupture Discs are semicircular scored reverse acting rupture discs designed specifically for the pharmaceutical, biotech, food and beverage industries. These rupture discs are available to fit between industry standard sanitary ferrules, NA-CONNECT® flanges or SANITRX fittings.
Specifically Designed for Pharmaceutical, Biotech, Food, Beverage, Consumer Products and other Sanitary and Clean Steam Processes
Unique Adjust-O-Seal® design provides upstream sealing and in-line adjustment for seat wear
Longer life
True-Bore® (valve bore same as connecting tubing or pipe)
Pad radius facilitates efficient drainage and reduces the pocket area above the ball.
Available in API-607 Fire Tested design
Optional Purge port and milled ball flats allow inline CIP to prevent clogging and plug formation
Available in Angle Stem versions for applications where automation may interfere with tank head or jacket.
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
Three piece body valves area multi-purpose ball valves. They tend to be used in more demanding applications where maintenance will be required on a more frequent basis than 2 piece valves. The 3 piece body's center section can be removed to allow the valve end caps to be welded without the possibility of damaging the valve seats. Any combination of end connections can be supplied to meet your custom requirements.
Ball valves are used throughout fluid based applications, from residential to heavy industrial. The compact and rugged design of this valve type provides superior service when properly applied. There are many variants of the basic design, with manufacturers providing builds that meet very specific and stringent requirements posed by certain types of industrial process control applications.
Because of their structural design, trunnion mount ball valves are suitable for all pressure ranges and sizes.They are used by many manufacturers as a basis of design for their severe service ball valve offerings. A trunnion mount ball valve can also be advantageous for applications employing valve automation. Since the ball is not held in place by a tight fitting seal arrangement, operating torque tends to be lower for comparably sized trunnion valves, when compared to floating ball valves.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
There is a variant of the simple version of the butterfly valve that provides distinct advantages for many applications. Referred to somewhat officially as a triple offset butterfly valve, it can also be more commonly called simply a triple offset valve.
The SANITRX HPX & SANITRX HPX II Rupture Discs can be used in a wide range of sanitary and hygienic applications throughout pharmaceutical, biotech, food, and beverage facilities. SANITRX HPX & SANITRX HPX II Rupture Discs are semicircular scored reverse acting rupture discs designed specifically for the pharmaceutical, biotech, food and beverage industries. These rupture discs are available to fit between industry standard sanitary ferrules, NA-CONNECT® flanges or SANITRX fittings.
Specifically Designed for Pharmaceutical, Biotech, Food, Beverage, Consumer Products and other Sanitary and Clean Steam Processes
Unique Adjust-O-Seal® design provides upstream sealing and in-line adjustment for seat wear
Longer life
True-Bore® (valve bore same as connecting tubing or pipe)
Pad radius facilitates efficient drainage and reduces the pocket area above the ball.
Available in API-607 Fire Tested design
Optional Purge port and milled ball flats allow inline CIP to prevent clogging and plug formation
Available in Angle Stem versions for applications where automation may interfere with tank head or jacket.
Azbil North America recently added the AX series of multivariable vortex flowmeters for industrial process measurement and control to their product offering. The instrument combines temperature, pressure and velocity measurement in a single instrument to provide accurate mass flow measurement of gases, liquids and steam.
Three piece body valves area multi-purpose ball valves. They tend to be used in more demanding applications where maintenance will be required on a more frequent basis than 2 piece valves. The 3 piece body's center section can be removed to allow the valve end caps to be welded without the possibility of damaging the valve seats. Any combination of end connections can be supplied to meet your custom requirements.
Ball valves are used throughout fluid based applications, from residential to heavy industrial. The compact and rugged design of this valve type provides superior service when properly applied. There are many variants of the basic design, with manufacturers providing builds that meet very specific and stringent requirements posed by certain types of industrial process control applications.
Because of their structural design, trunnion mount ball valves are suitable for all pressure ranges and sizes.They are used by many manufacturers as a basis of design for their severe service ball valve offerings. A trunnion mount ball valve can also be advantageous for applications employing valve automation. Since the ball is not held in place by a tight fitting seal arrangement, operating torque tends to be lower for comparably sized trunnion valves, when compared to floating ball valves.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
There is a variant of the simple version of the butterfly valve that provides distinct advantages for many applications. Referred to somewhat officially as a triple offset butterfly valve, it can also be more commonly called simply a triple offset valve.
The GS valve is a high performance variable orifice control valve. Known as a sliding gate valve, the GS3 seat design features a non turbulent, straight through flow path. The flow is broken apart into multiple streams creating a reduced field of energy. The result is greater service life, quieter operation and a control valve that performs at the highest levels possible within extreme conditions. Maximized temperatures and pressures, 986 F and 1,450 psi. Sizes 1/2″ – 10″ (DN 15 – 250) Carbon Steel and 316 Ti Stainless Steel, and Hastelloy C4 in select sizes.
Check-All Valve manufactures in-line spring-loaded poppet-type check valves, vacuum breakers, and low pressure relief devices. All valves are available with metal to metal or soft seats. Sizes range from 1/8” NPT to 20 inch flanged connections. Pressure ratings are available from full vacuum to 10,000 psi. Special materials available are Titanium, Alloy C-276, alloy 20 and many others. Fluoropolymer (FEP) encapsulated springs are available for special corrosion applications.
SEALEXCEL is a fast-growing manufacturing company in the field of design, development, production and marketing of high-quality valves and fittings for international and domestic markets, Since 1987.
https://www.sealexcel.com/pipe-fittings/
stainless pipe fittings, stainless steel pipe fittings manufacturers
SEALEXCEL’s total quality system and control from incoming raw material inspecon through ongoing quality assurance during producon, final inspecon, assembly, tesng, packing and dispatch ensure high standard quality products which has earned us various quality cerficaons
https://www.sealexcel.com/instrumentation-fittings/
View the latest Gates Leak-free port to port brochure illustrating how Gates hydraulic products work together to give you just one part, or the complete solution to your fluid power needs.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
Manufacturing, supplying, exporting Single and Double Check Valve Couplings, Ball Valves and Coupler Hoses. These are appreciated for their sturdiness and resistance to corrosion.
Greyhound Chromatography offers an extensive range of HPLC and UHPLC pumps for analytical, preparative and fluid-metering applications. Greyhound also supplies a comprehensive range of replacement parts and accessories. With a choice of either stainless steel or inert PEEK flow paths, their precision flows and pressure settings ensure reproducible separations time after time.
Specifically Designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Valves are designed to ASME B16.34 and feature minimal dead space, preventing build-up. Purge ports and optional milled flats enable Clean In Place and drainage without process interruption.
Bolt pattern accommodates standard industry ANSI 150# flanged connections and retrofits to knife gate patterns. Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media.
Jingbo Petroleum Machinery Co.,Ltd., founded in 1986, is committed to providing quality oilfield hoses worldwide.
we can provided rubber rotary drilling hose,Cementing Hose,Choke & Kill Hose,BOP Hose,Hammer Union etc.
GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other
international standards including BS and Din available upon request.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
Magnatrol Valve provides high quality bronze and stainless steel solenoid valves, temperatures to 400F, pressures to 500 PSI, for control of water, oil, steam, air, gas, cryogenics, solvents, oxygen, and corrosive fluids.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
There are industrial process control applications where it can be beneficial to operate valve actuators with pressurized water instead of compressed air. There are instances, common at remote sites, where compressed air is not available, but mains water supply in the pressure range from
60-100psi (4 - 7 bar) is present. Standard HYTORK XL Actuators have been used successfully in water applications but the manufacturer recommends that their XLW Actuators, specifically designed for water operation, are
used in this application to assure smooth and reliable operation. Specialties of the XLW series address concerns with corrosion protection, bearings and preventing ingress of particulates with the water. Contaminated water can cause
damage to the actuator seals and bearing areas, reducing operating efficiency and actuator life.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
GWC produces a wide variety of Cast Steel Pressure
Seal Gate, Globe and Check valves. Other available
pressure seal designs include Tilting Disc, Piston
Type and Stop Check valves.
The GS valve is a high performance variable orifice control valve. Known as a sliding gate valve, the GS3 seat design features a non turbulent, straight through flow path. The flow is broken apart into multiple streams creating a reduced field of energy. The result is greater service life, quieter operation and a control valve that performs at the highest levels possible within extreme conditions. Maximized temperatures and pressures, 986 F and 1,450 psi. Sizes 1/2″ – 10″ (DN 15 – 250) Carbon Steel and 316 Ti Stainless Steel, and Hastelloy C4 in select sizes.
Check-All Valve manufactures in-line spring-loaded poppet-type check valves, vacuum breakers, and low pressure relief devices. All valves are available with metal to metal or soft seats. Sizes range from 1/8” NPT to 20 inch flanged connections. Pressure ratings are available from full vacuum to 10,000 psi. Special materials available are Titanium, Alloy C-276, alloy 20 and many others. Fluoropolymer (FEP) encapsulated springs are available for special corrosion applications.
SEALEXCEL is a fast-growing manufacturing company in the field of design, development, production and marketing of high-quality valves and fittings for international and domestic markets, Since 1987.
https://www.sealexcel.com/pipe-fittings/
stainless pipe fittings, stainless steel pipe fittings manufacturers
SEALEXCEL’s total quality system and control from incoming raw material inspecon through ongoing quality assurance during producon, final inspecon, assembly, tesng, packing and dispatch ensure high standard quality products which has earned us various quality cerficaons
https://www.sealexcel.com/instrumentation-fittings/
View the latest Gates Leak-free port to port brochure illustrating how Gates hydraulic products work together to give you just one part, or the complete solution to your fluid power needs.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
Manufacturing, supplying, exporting Single and Double Check Valve Couplings, Ball Valves and Coupler Hoses. These are appreciated for their sturdiness and resistance to corrosion.
Greyhound Chromatography offers an extensive range of HPLC and UHPLC pumps for analytical, preparative and fluid-metering applications. Greyhound also supplies a comprehensive range of replacement parts and accessories. With a choice of either stainless steel or inert PEEK flow paths, their precision flows and pressure settings ensure reproducible separations time after time.
Specifically Designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Valves are designed to ASME B16.34 and feature minimal dead space, preventing build-up. Purge ports and optional milled flats enable Clean In Place and drainage without process interruption.
Bolt pattern accommodates standard industry ANSI 150# flanged connections and retrofits to knife gate patterns. Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media.
Jingbo Petroleum Machinery Co.,Ltd., founded in 1986, is committed to providing quality oilfield hoses worldwide.
we can provided rubber rotary drilling hose,Cementing Hose,Choke & Kill Hose,BOP Hose,Hammer Union etc.
GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other
international standards including BS and Din available upon request.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
Magnatrol Valve provides high quality bronze and stainless steel solenoid valves, temperatures to 400F, pressures to 500 PSI, for control of water, oil, steam, air, gas, cryogenics, solvents, oxygen, and corrosive fluids.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
There are industrial process control applications where it can be beneficial to operate valve actuators with pressurized water instead of compressed air. There are instances, common at remote sites, where compressed air is not available, but mains water supply in the pressure range from
60-100psi (4 - 7 bar) is present. Standard HYTORK XL Actuators have been used successfully in water applications but the manufacturer recommends that their XLW Actuators, specifically designed for water operation, are
used in this application to assure smooth and reliable operation. Specialties of the XLW series address concerns with corrosion protection, bearings and preventing ingress of particulates with the water. Contaminated water can cause
damage to the actuator seals and bearing areas, reducing operating efficiency and actuator life.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
GWC produces a wide variety of Cast Steel Pressure
Seal Gate, Globe and Check valves. Other available
pressure seal designs include Tilting Disc, Piston
Type and Stop Check valves.
SYSTEMS SUNLIGHT S.A. | OPzS Batteries for Stationary ApplicationsSYSTEMS SUNLIGHT S.A.
OPzS OVERVIEW
Vented Tubular Plate Batteries for Stationary Applications
SUNLIGHT’s OPzS batteries are characterized by low maintenance requirements, long service life and excellent capacity performance while operating in high temperature or unstable power network, thus providing a premium efficient and cost effective energy solution.
Optimized design, according to DIN international standards, exclusive use of high quality raw materials, robust construction and state of the art manufacturing processes make this OPzS range the ideal solution for stationary applications demanding high level of safety and reliability.
APPLICATIONS
:: Telecommunications
:: Power generation & distribution
:: Utilities
:: UPS systems
:: Emergency lightning
:: Transportation signaling
Jordan MK75PTP Sliding Gate Control ValveSwanson Flo
The Jordan Mark 75PTP is a Mark 75 wafer style control valve with an 80mm (1" - 2") Stainless Steel Piston Actuator. The Gemu cPOS Smart Positioner is standard and required for control applications. For on/off service, the valve may supplied without a positioner. JVCV Should be used for sizing selection.
Jordan Valve Mark 75 Flangeless Wafer Style Control ValvesSwanson Flo
The Mark 75 Series is the next generation of control valves by Jordan Valve with all the benefits of the sliding gate seat design, coupled with the lightweight, compact wafer style body, the Mark 75 provides unparalleled performance and value.
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
SYSTEMS SUNLIGHT S.A. | RES SLT (Quality Batteries for Renewable Energy Stora...SYSTEMS SUNLIGHT S.A.
RES SLT is a quality range of batteries designed for daily cycling operation offering significant benefits in terms of cost per cycle. Their long life and remarkably high performance suits ideally to the demanding Renewable Energy Storage applications.
One day class to provide an overview of the basic steam system from boiler through steam distribution and measurement to point of use and then ultimately back to the boiler.
ASCO Solenoid Valves Catalog with detailed specifications to order with complete correct sizes and configuration choices. For reference only. To order, contact Carotek.com
CIP vs COP - Hygienic Pumps and Meeting Government Regulations - Carotek Proc...Carotek
Learn about the recent trends and legislation that impacts COP vs CIP in the food & beverage processing and pharmaceutical markets. Learn what to look for in equipment selection to maximize process efficiency and flexibility, while meeting hygienic requirements.
Revealing power quality as a process variable - Carotek Process Solutions Su...Carotek
Less unscheduled downtime means more efficiency, more productivity, more profit. Dirty Power is often the unseen culprit, accounting for an estimated 20%-30% of all unexplained stoppages. This session covers ways to diagnose and reduce—and even prevent—Dirty Power events.
Internet of Things - structured approach to the physical plant network - Rock...Carotek
The convergence of new technologies that securely connect plant information with enterprise systems can bring greater productivity, better utilization of assets, and improved decision-making to industrial companies. By bridging the gap between factory-level systems and enterprise systems, Rockwell Automation and Cisco can show how the connected enterprise offers ease of use, lower total cost of ownership, and improved operations.
Peerless Pump Prevent Vibration - Carotek Process Solutions SummitCarotek
See and participate in a Hands-On Vertical Turbine pump tear down and determine the symptoms and analysis of the root causes of vibration. See real life effects of excessive vibration, how it effects pump operation and what to do about it.
City of Asheboro Carotek Process Solutions Summit presentationCarotek
Learn how the City of Asheboro is meeting government regulations, reducing power consumption, saving on chemical cost by using the proper instrumentation equipment. This leads to real-time data, better monitoring and control methods, cost savings and more for the city.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Kseniya Leshchenko: Shared development support service model as the way to ma...Lviv Startup Club
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Digital Transformation and IT Strategy Toolkit and Templates
Viking Pump - 230 hygienic series brochure
1. Capacity
to 320 GPM (73 M3/Hr)
Viscosity
28 to 1,000,000 SSU (1 to 220,000 cSt)
Pressure
to 150 PSI (10 BAR)
Temperature
-5°F to +225°F (-20°C to +107°C)
PENDING
2. INDUSTRY & APPLICATION EXPERTS
GLOBAL
LEADER
PUMPING IN POSITIVE DISPLACEMENT
MARKETS &
SOLUTIONS
APPLICATIONS
Viking’s Hygienic Series positive
displacement pumps are designed
to conform to international
standards for hygienic processing
of foods, beverages, fine chemicals,
pharmaceuticals and personal care
products where the pump will be
subject to frequent cleaning. Pumps
are designed for Clean In Place (CIP)
or Clean Out of Place (COP)/Strip
Clean Methods.
SCAN TO GET INSTANT ACCESS TO
VIKING PUMP’S WEBSITE
VIKINGPUMP.COM/HYGIENIC
• Application experience spanning more than 100 years
• Extensive food and personal care product application expertise
• Viking invented the internal gear pump
• Reliability, quality and performance
• Global service & support
Dairy
Chemicals
Meat
Chocolates
Edible Oils
& Nut Butters
Confectioneries
& Sweeteners
Personal Care Products
2 VIKINGPUMP.COM GLOBAL LEADER IN POSITIVE DIS PLACEMENT PUMPING SOLUTIONS VIKINGPUMP.COM 3
3. HYGIENIC SERIES
ADVANTAGES
SEALED BEARINGS
WITH FOOD-GRADE GREASE
Means no oil reservoir and no oil changes.
INTERNAL ANGLES
Machined to a minimum
radius of 1/32 in (0.08 mm)
to ensure cleanability.
INTERNAL WETTED
SURFACES
Polished to a minimum
Ra of 32μin (0.8μm)
to ensure cleanability.
FRONT REMOVABLE ROTOR,
SHAFT SEAL AND CASING
Enables fast disassembly and reassembly for
cleaning or inspection without disturbing drive end.
(Patent pending)
ROTATABLE
BEARING HOUSING
Allows five minute end clearance
adjustment by rotating the bearing housing,
vs. 2-4 hours shimming on most lobe
or circumferential piston pumps.
REMOVABLE
IDLER PIN
Allows replacement of pin only
instead of head and pin assembly
to reduce maintenance costs.
(Patent pending)
LOCATING PIN ON CASING
Ensures correct pump head reassembly.
DOUBLE SEAL FLUSH/
QUENCH PORTS STANDARD
Enables field change from
single to double seals.
JACKSCREW TAPS
For easy head removal.
INSPECTION PORTS
At 3, 6, 9 and 12 o’clock positions,
provide visual cue of seal leakage
and keeps liquid out of bearings.
RIGID BRACKET
Ensures shaft alignment to
maximize seal and bearing life.
ONLY ONE SHAFT SEAL
Reduces chance of unplanned downtime
due to seal leakage and reduces cost of seal
replacement compared to most hygienic PD
pumps which require two seals.
Cleaning Methods:
COP (Clean Out of Place)*
• Available conforming to 3-A
Hygienic Standard #02-11,
USDA FSIS sanitation guidelines,
FDA GMP guidelines.
• Easily removable head, rotor,
seal and casing enables complete
cleaning of wetted parts.
Standards and Options:
Seals:
• Single mechanical seal standard.
CIP (Clean In Place)*
• Available with EHEDG Type EL Class 1
Certification for In-Place Cleanability
• Available conforming to 3-A Hygienic
Standard #02-11, USDA FSIS sanitation
guidelines, FDA GMP guidelines.
• Vertical ports for self-draining.
Optional: double mechanical seal with flush/quench or single or double O-ring seal.
Head Fasteners:
• Acorn nuts standard, wing nuts optional.
Heating/Cooling:
• Jacketing option for melting chocolate or other
ambient temperature solids prior to startup.
Porting:
• Hygienic clamp ports conforming to ISO 2852 standard.
Other hygienic ports and ANSI compatible flange ports optional.
• Standard and optional port sizes listed in specifications, page 6.
• Opposite ports standard, 90° ports optional.
• CIP-able port orientations:
Jacketing option
• Additional port orientations for COP:
One port oriented downwards for drainability.
(Flanged ports not available with vertical port oriented downward)
*Not all configurations compliant with 3-A and/or EHEDG due to customer-specified option requirements like ANSI flanges or non-approved materials.
Interchangeable with Existing
Viking Heavy Duty Pumps
4 VIKINGPUMP.COM GLOBAL LEADER IN POSITIVE DIS PLACEMENT PUMPING SOLUTIONS VIKINGPUMP.COM 5
4. HYGIENIC SERIES
SPECIFICATIONS
HYGIENIC SERIES
S W
P
4X .50 MIN
F
H L
T R
N
A
S W
M
T R N
U
P
T R
K
D
T R N
K
S W
4X .50 MIN
P
F
A
P
4X .50 MIN
F
M H L
M H L
V
A
J
E E
G
B B
C
B
B
C O
J
E E
J
E E
G
D
B B
O
C O
M
F
H L
U
S W
N
4X .50 MIN
A
V
C
B
B
E E
G
J
D
O
DIMENSIONS
DIMENSIONS
Model No. A
(in)
①
K
V
B
(clamp)
B
(flange)
C②
D
D E F G H J K L
G
③ M N O P R S T U
K
V
U
U
Mech. O-Ring
③ V W
Seal
Seal
H4157B H157B 1
in 3.50 4.00 4.88 3.50 2.25 2.25 6.75 3.50 0.47 0.99 3.38 5.19 0.79 0.56 0.62 10.44 12.85 1.62 0.75 0.19 x 0.09 1.56
mm 88.9 101.6 124.0 88.9 57.2 57.2 171.5 88.9 11.9 25.1 85.7 131.8 20.1 14.2 15.7 265.2 326.4 41.1 19.1 4.83 x 2.29 39.6
HL4157B HL157B 1.5
in 3.38 4.00 4.88 3.50 2.25 2.25 6.75 3.50 0.47 0.99 3.38 5.19 1.41 0.56 0.62 10.44 13.47 1.62 0.75 0.19 x .09 1.56
mm 85.9 101.6 124.0 88.9 57.2 57.2 171.5 88.9 11.9 25.1 85.7 131.8 35.8 14.2 15.7 265.2 342.1 41.1 19.1 4.83 x 2.29 39.6
KS4157B KS157B 1.5
in 4.88 5.50 8.32 5.50 4.00 2.75 9.25 4.00 0.53 1.42 3.00 9.38 1.15 0.56 0.62 14.25 17.52 2.13 1.12 0.25 x 0.12 1.65
mm 124.0 139.7 211.3 139.7 101.6 69.9 235.0 101.6 13.5 36.1 76.2 238.3 29.2 14.2 15.7 362.0 445.0 54.1 28.4 6.35 x 3.05 41.9
K4157B K157B 2
in 4.88 5.25 8.32 5.50 4.00 2.75 9.25 4.00 0.53 1.42 3.00 9.38 1.40 0.56 0.62 14.25 17.77 2.13 1.12 0.25 x 0.12 1.65
mm 124.0 133.4 211.3 139.7 101.6 69.9 235.0 101.6 13.5 36.1 76.2 238.3 35.6 14.2 15.7 362.0 451.4 54.1 28.4 6.35 x 3.05 41.9
KK4157B KK157B 2
in 4.88 5.25 8.32 5.50 4.00 2.75 9.25 4.00 0.53 1.42 3.00 9.38 1.90 0.56 0.62 14.25 18.27 2.13 1.12 0.25 x 0.12 1.65
mm 124.0 133.4 211.3 139.7 101.6 69.9 235.0 101.6 13.5 36.1 76.2 238.3 48.3 14.2 15.7 362.0 464.1 54.1 28.4 6.35 x 3.05 41.9
LQ4157B LQ157B 2.5
in 6.32 7.19 10.88 7.00 4.38 4.00 10.00 5.38 0.53 1.42 3.38 9.12 2.25 0.62 0.62 15.75 20.12 2.13 1.12 0.25 x 0.12 2.57
mm 160.5 182.6 276.4 177.8 111.3 101.6 254.0 136.7 13.5 36.1 85.9 231.6 57.2 15.7 15.7 400.1 511.0 54.1 28.4 6.35 x3 .05 65.3
LL4157B LL157B 3
in 6.07 7.19 10.88 7.00 4.38 4.00 10.00 5.38 0.53 1.42 3.38 9.12 2.75 0.62 0.62 15.75 20.62 2.13 1.12 0.25 x 0.12 2.57
mm 154.2 182.6 276.4 177.8 111.3 101.6 254.0 136.7 13.5 36.1 85.9 231.6 69.9 15.7 15.7 400.1 523.7 54.1 28.4 6.35 x 3.05 65.3
LS4157B LS157B 3
in 6.07 7.19 10.88 7.00 4.38 4.00 10.00 5.38 0.53 2.55 4.75 9.12 2.41 0.62 0.62 15.90 21.66 3.50 1.44 0.38 x 0.19 2.57
mm 154.2 182.6 276.4 177.8 111.3 101.6 254.0 136.7 13.5 64.8 120.7 231.6 61.2 15.7 15.7 403.9 550.2 88.9 36.6 9.65 x 4.83 65.3
Q4157B Q157B 4
in 8.40 8.25 14.5 8.75 4.12 4.00 10.00 6.00 0.64 3.58 6.62 11.13 2.47 0.80 1.00 19.25 26.2 4.50 1.94 0.5 x 0.12 3.69
mm 213.4 209.6 368.3 222.3 104.6 101.6 254.0 152.4 17.5 90.9 168.1 282.7 62.7 20.3 25.4 489.0 665.5 114.3 49.3 12.7 x 3.0 93.7
QS4157B QS157B 6
in N/A 9.00 14.50 8.75 4.12 4.00 10.00 6.00 0.69 3.58 7.12 11.13 3.47 0.80 1.00 19.75 27.72 4.50 1.94 0.5 x 0.25 3.95
mm N/A 228.6 368.3 222.3 104.6 101.6 254 152.4 17.5 90.9 180.8 282.7 88.1 20.3 25.4 501.6 704.1 114.3 49.3 12.7 x 6.3 100.3
① Standard ports are hygienic clamp. Hygienic clamp port dimension is O.D. of pipe, not O.D. of ferrule, which is about 1/2” greater diameter. Flange ports suitable for use with Class 150 steel or stainless steel
companion flanges or flanged fittings.
② “D” dimension on H-Q sizes represents both shaft height and horizontal port centerline height. “D” dimension on QS size represents shaft height only. Horizontal port centerline height on QS size is 11.75” (298.5 mm).
③ “U” dimension on L, LL & LS equivalent to Viking Universal Seal 127A series of same size, not 127AE or B, which have 1.44” (36.6 mm) diameter.
NOTE: Jacketed pumps (models 257B & 4257B) not shown. For jacketed pump dimensions, contact factory or your local distributor.
SPECIFICATIONS
Nominal Pump Flow Rate
(100 SSU)
Max. Differential
Pressure
Max. Hydrostatic
④ in in GPM M3/Hr RPM PSIG BarG PSIG BarG °F °C lbs kg
H4157B H157B 1 - 10 2.3 1150 150 10 400 28 225 107 40 18
HL4157B HL157B 1-1/2 - 20 4.5 1150 150 10 400 28 225 107 42 19
KS4157B KS157B 1-1/2 2 34 7.7 520 150 10 400 28 225 107 123 56
K4157B K157B 2 2-1/2 50 10 520 150 10 400 28 225 107 125 57
KK4157B KK157B 2 2-1/2, 3 65 14.7 520 150 10 400 28 225 107 130 59
LQ4157B LQ157B 2-1/2 3 90 20 420 150 10 400 28 225 107 233 106
LL4157B LL157B 3 - 110 25 420 150 10 400 28 225 107 240 109
LS4157B LS157B 3 4 160 36 520 125 8.5 400 28 225 107 255 116
Q4157B Q157B 4 6 200 45 350 125 8.5 400 28 225 107 615 279
QS4157B QS157B 6 - 320 73 350 125 8.5 400 28 225 107 677 307
① Standard ports are ISO 2852 hygienic clamp. Port options include most other hygienic port types and ANSI-compatible Class 150 flanges.
② Higher temperatures can be handled with special construction, consult factory.
③ Mechanical seal viscosity range: Carbon/SIC 1 to 5,000 cSt; SIC/SIC 1 to 220,000 cSt.
④ O-ring seal viscosity range: 1 to 220,000 cSt.
⑤ Pumps with jacketing denoted as 257B or 4257B
MATERIALS OF CONSTRUCTION
Model Number ⑤ Standard Port
Size ①
Optional
Ports
O-Ring Seal
Component Product
Pressure
Max. Recommended Temp
for Std. Pump ②
Contact? Standard Construction Options
Approximate
Shipping Weight
Mech Seal
③
Casing, Head and Rotor Yes 316 SS ─
Rotor Retainer Screw Yes 316 SS ─
Rotor Retainer Washer Yes 17-4 PH SS ─
Idler Yes 770 Non-Galling Alloy FDA PEEK (200°F/93°C Max Temp)
FDA Metal Detectable Acetal (125°F/52°C Max Temp)
Idler Bushing Yes FDA Carbon Graphite Silicon Carbide, Hardened Iron ①
Idler Pin Yes 316 Stainless Steel, Colmonoy #6 Coated ─
Single Mechanical Seal Faces Yes Carbon vs. Silicon Carbide SiC vs. SiC
Double Mechanical Seal Faces Yes Carbon (Stationary 1) vs. Silicon Carbide (Rotary)
vs. Carbon (Stationary 2)
SiC (Stationary 1) vs. SiC (Rotary)
vs. Carbon (Stationary 2)
O-Rings and Mechanical Seal Elastomers Yes FDA Buna FDA EPDM, FDA Viton®, Others Available
Seal Hardware, Including O-Ring Seal
Sleeve (for O-Ring Shaft Seal Option) Yes 316 SS ─
Seal Springs No 304 SS ─
Shaft No 17-4 PH SS ─
Sealed Ball Bearing No Steel, Buna, H1 Food Grade Grease ─
Sealed Angular Contact Thrust Bearings No Steel, Buna, H1 Food Grade Grease ─
Bracket No Cast Iron, Powder-Coated ─
Bearing Housing No 316 SS ─
Tie Bolts No 304 SS ─
Head Nuts No 304 SS Head Wing Nuts
Head Jacket (Option) No 316 SS ─
Bracket Jacket (Option) ② No 316 SS Tubing ─
Head Jacket O-Ring No Aflas® ─
① Material option not compatible with cleaning solutions, disqualifies pump from 3A and EHEDG certifications.
② Bracket jacket disqualifies pump from 3A certification.
Viton® is a registered trademark of DuPont Performance Elastomers, L.L.C.
Aflas® is a registered trademark of the Asahi Glass Co., Ltd.
6 VIKINGPUMP.COM GLOBAL LEADER IN POSITIVE DIS PLACEMENT PUMPING SOLUTIONS VIKINGPUMP.COM 7