Static charges on corona treater
•
3 likes•236 views
Corona treatment generates high level of static charges. Along with dust and wear and tear, it results in shocks to the operator. Valstat static eliminating bars help in smooth operation and reduce operational risks. To find out more about Valence Electrons: ategroup.com/valence Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/ Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Report
Share
Report
Share
Download to read offline
Recommended
Static charges on center-cum-surface rewinder
Removing static charges on a centre-cum-surface rewinder gets imperative as surface voltages can reach 100 kV or higher. Valstat static eliminating bars are effective in bringing the charge down to near zero levels.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges on surface rewinder
While the winding process is important, it is also crucial that static charges are controlled since high static charges are generated during the process. The Valstat DC bar in the working range up to 600 mm and with line speeds of up to 1000 m/min handle the problem effectively.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges on slitter and duplex rewinder
Valstat static discharging bars eliminate static charges at ranges of up to 600 mm and are ideally suited for duplex rewinders for narrow and wide web printing. Enhance quality, avoid shocks and minimise risks of fire with Valstat.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges on a coating and laminating line
Coating and laminating machines gather dust, risk sparks and have problems in rewinding if the static charges are left unattended. Valence has effective solutions to ensure static-free processes.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges in vertical form fill and seal machines
Did you know that the seal on packaging is affected due to the presence of static charges? Valence solutions handle static charges in vertical form fill and seal machines to ensure perfect packaging.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charging on rewinder cores
When a new core is introduced for winding on the rewinder of a cast film extrusion line, a few metres of substrate is wasted as the tape or glue prevents the proper winding of the first few layers of the new roll. Valstat® static charging bars provide the perfect solution to the problem of improper winding. Read the application note to find out more.
Static charges on J Scray and Batching
Static charges in the J scray can hamper production. This application note on static neutralisers shows how to prevent this.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Recommended
Static charges on center-cum-surface rewinder
Removing static charges on a centre-cum-surface rewinder gets imperative as surface voltages can reach 100 kV or higher. Valstat static eliminating bars are effective in bringing the charge down to near zero levels.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges on surface rewinder
While the winding process is important, it is also crucial that static charges are controlled since high static charges are generated during the process. The Valstat DC bar in the working range up to 600 mm and with line speeds of up to 1000 m/min handle the problem effectively.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges on slitter and duplex rewinder
Valstat static discharging bars eliminate static charges at ranges of up to 600 mm and are ideally suited for duplex rewinders for narrow and wide web printing. Enhance quality, avoid shocks and minimise risks of fire with Valstat.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges on a coating and laminating line
Coating and laminating machines gather dust, risk sparks and have problems in rewinding if the static charges are left unattended. Valence has effective solutions to ensure static-free processes.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges in vertical form fill and seal machines
Did you know that the seal on packaging is affected due to the presence of static charges? Valence solutions handle static charges in vertical form fill and seal machines to ensure perfect packaging.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charging on rewinder cores
When a new core is introduced for winding on the rewinder of a cast film extrusion line, a few metres of substrate is wasted as the tape or glue prevents the proper winding of the first few layers of the new roll. Valstat® static charging bars provide the perfect solution to the problem of improper winding. Read the application note to find out more.
Static charges on J Scray and Batching
Static charges in the J scray can hamper production. This application note on static neutralisers shows how to prevent this.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...Jacton Electromechanical Co.,Ltd
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specifications, 500 kn screw jack threaded rod, 100000 lbs screw jack torque calculation, screw jack thread type features:
1. Maximum load capacity 50 ton, maximum torque 848 Nm.
2. Lift screw diameter 120 mm, pitch 20 mm.
3. 33:3, 32:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1818 mm/min and 625 mm/min.
8. No standard lift screw stroke, maximum travel stroke 5500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...
Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...Jacton Electromechanical Co.,Ltd
Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn screw thread actuator lift, 50000 lbs worm screw actuator, worm gear screw actuator, worm gear linear actuator features:
1. Maximum load capacity 20 ton, maximum torque 228 Nm.
2. Lift screw diameter 65 mm, pitch 12 mm.
3. 8:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2250 mm/min and 750 mm/min.
8. No standard lift screw stroke, maximum travel stroke 3000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...
Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...Jacton Electromechanical Co.,Ltd
Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear actuator, 100 kn acme lead screw jack efficiency, 20000 lbs acme screw thread jack efficiency features:
1. Maximum load capacity 10 ton, maximum torque 108 Nm.
2. Lift screw diameter 58 mm, pitch 12 mm.
3. 23:3, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2348 mm/min and 750 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...
Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...Jacton Electromechanical Co.,Ltd
Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator acme screw jack, linear ball screw actuator, 50000 lbs screw driven linear actuator, 25t machine screw actuator features:
1. Maximum load capacity 25 ton, maximum torque 314 Nm.
2. Lift screw diameter 90 mm, pitch 16 mm.
3. 32:3, 32:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1500 mm/min and 500 mm/min.
8. No standard lift screw stroke, maximum travel stroke 3500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Electrostatic charging for better flocking
During the process of flocking, flocks that are allowed to fall freely onto the adhesive coated fabric can form an uneven layer of fibres on the fabric. Valstat® HV charging generators prevent this. Read the application note to find out how.
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...Jacton Electromechanical Co.,Ltd
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear actuator, 25 kn acme screw jack load capacity, 5000lbs jack screw acme nut features:
1. Maximum load capacity 2.5 ton, maximum torque 18 Nm.
2. Lift screw diameter 30 mm, pitch 6 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min and 375 mm/min.
8. No standard lift screw stroke, maximum travel stroke 1500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...Jacton Electromechanical Co.,Ltd
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acme screw jack linear, 10000lbs acme thread screw jack, compact acme screw jacks features:
1. Maximum load capacity 5 ton, maximum torque 44.2 Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Pvc electrical insulation tape
manufacture offer pvc electrical tape
lt2tape@cnliantu.com
whatsapp : 008618932904172 skype : lt2tape
レーザーポインター 30000mw
http://24h-buy.com/30000mw-blue-new-invincible-laser-pointer.html
世界最強出力30000mwブルーレーザーポインター防水 5in1 市場で最高出力30w青色レーザー 懐中電灯
http://24h-buy.com/new-product.html
Smart Technology and Service Suite Equipment Monitoring - Diesel Gensets
For more information log on to www.ategroup.com
CommunicA.T.E. – January 2017
The latest edition of A.T.E.'s e-magazine for the textile industry, with a special feature on India ITME 2016.
Ink circulation in rotogravure printing
Thickening of ink hampers smooth functioning of a printing machine. To avoid thickening, ink needs to circulate between printing tray and ink tank continuously. Valflow centrifugal ink pumps enable smooth operation, thus maintaining the right viscosity of ink.
To find out more about Valence Electrons: ategroup.com/valence
To find out more about our solutions for ink handling and conditioning: http://ategroup.com/valence/value-enhancing-systems/product-family/ink-handling-and-conditioning/
More Related Content
What's hot
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...Jacton Electromechanical Co.,Ltd
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specifications, 500 kn screw jack threaded rod, 100000 lbs screw jack torque calculation, screw jack thread type features:
1. Maximum load capacity 50 ton, maximum torque 848 Nm.
2. Lift screw diameter 120 mm, pitch 20 mm.
3. 33:3, 32:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1818 mm/min and 625 mm/min.
8. No standard lift screw stroke, maximum travel stroke 5500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...
Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...Jacton Electromechanical Co.,Ltd
Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn screw thread actuator lift, 50000 lbs worm screw actuator, worm gear screw actuator, worm gear linear actuator features:
1. Maximum load capacity 20 ton, maximum torque 228 Nm.
2. Lift screw diameter 65 mm, pitch 12 mm.
3. 8:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2250 mm/min and 750 mm/min.
8. No standard lift screw stroke, maximum travel stroke 3000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...
Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...Jacton Electromechanical Co.,Ltd
Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear actuator, 100 kn acme lead screw jack efficiency, 20000 lbs acme screw thread jack efficiency features:
1. Maximum load capacity 10 ton, maximum torque 108 Nm.
2. Lift screw diameter 58 mm, pitch 12 mm.
3. 23:3, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2348 mm/min and 750 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...
Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...Jacton Electromechanical Co.,Ltd
Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator acme screw jack, linear ball screw actuator, 50000 lbs screw driven linear actuator, 25t machine screw actuator features:
1. Maximum load capacity 25 ton, maximum torque 314 Nm.
2. Lift screw diameter 90 mm, pitch 16 mm.
3. 32:3, 32:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1000 rpm input, standard lifting speed 1500 mm/min and 500 mm/min.
8. No standard lift screw stroke, maximum travel stroke 3500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Electrostatic charging for better flocking
During the process of flocking, flocks that are allowed to fall freely onto the adhesive coated fabric can form an uneven layer of fibres on the fabric. Valstat® HV charging generators prevent this. Read the application note to find out how.
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...Jacton Electromechanical Co.,Ltd
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear actuator, 25 kn acme screw jack load capacity, 5000lbs jack screw acme nut features:
1. Maximum load capacity 2.5 ton, maximum torque 18 Nm.
2. Lift screw diameter 30 mm, pitch 6 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min and 375 mm/min.
8. No standard lift screw stroke, maximum travel stroke 1500mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...Jacton Electromechanical Co.,Ltd
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acme screw jack linear, 10000lbs acme thread screw jack, compact acme screw jacks features:
1. Maximum load capacity 5 ton, maximum torque 44.2 Nm.
2. Lift screw diameter 40 mm, pitch 7 mm.
3. 6:1, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1750 mm/min and 437.5 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.
11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Pvc electrical insulation tape
manufacture offer pvc electrical tape
lt2tape@cnliantu.com
whatsapp : 008618932904172 skype : lt2tape
レーザーポインター 30000mw
http://24h-buy.com/30000mw-blue-new-invincible-laser-pointer.html
世界最強出力30000mwブルーレーザーポインター防水 5in1 市場で最高出力30w青色レーザー 懐中電灯
http://24h-buy.com/new-product.html
What's hot (17)
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...
Jtw 50 t worm screw jack, 50t jack screw acme nut, 50 ton screw jack specific...
Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...
Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...
Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...
Jtw 10 t worm screw jack, acme screw drive, 10 ton acme screw driven linear a...
Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...
Jtw 25 t worm screw jack, 25 ton acme screw actuator, 250 kn linear actuator ...
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...
Jtw 2.5 t worm screw jack, acme ball screw jack, 2.5 ton acme screw linear ac...
High voltage fuse blown indicator with automatic fuse roll system
High voltage fuse blown indicator with automatic fuse roll system
High voltage fuse blown indicator with automatic fuse roll system
High voltage fuse blown indicator with automatic fuse roll system
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...
Jtw 5 t worm screw jack, acme screw gear jack, 5ton acme screw jack, 50kn acm...
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Elastimold Loadbreak Elbows 200Amp - Elastimold 166LR
Viewers also liked
Smart Technology and Service Suite Equipment Monitoring - Diesel Gensets
For more information log on to www.ategroup.com
CommunicA.T.E. – January 2017
The latest edition of A.T.E.'s e-magazine for the textile industry, with a special feature on India ITME 2016.
Ink circulation in rotogravure printing
Thickening of ink hampers smooth functioning of a printing machine. To avoid thickening, ink needs to circulate between printing tray and ink tank continuously. Valflow centrifugal ink pumps enable smooth operation, thus maintaining the right viscosity of ink.
To find out more about Valence Electrons: ategroup.com/valence
To find out more about our solutions for ink handling and conditioning: http://ategroup.com/valence/value-enhancing-systems/product-family/ink-handling-and-conditioning/
Effective cooling solution for print and packaging industry
Uma Converters is one of the leading flexible packaging companies. It faced serious and multiple issues due to heat. The HMX-Ambiator, a unique cooling solution, addressed all the issues in one stroke. The management, employees, and the customers are now happy with this change.
For more information visit us at: http://ategroup.com/
To know more about the HMX-Ambiator visit http://ategroup.com/hmx/product-family/product-description/hmx-ambiator/
Download the complete case study: http://ategroup.com/wp-content/uploads/case-studies/CS1-Uma-Converters.pdf
This month’s CommunicA.T.E has exciting news.
Read our special feature on tie-ups with some international big-wigs + service and maintenance tips and a lot more.
Continuous Measurement and Verification for Energy Efficiency
For more information log on to www.ategroup.com
Trends in Energy Efficient Cooling
Presented at the HMX IDECool Launch for Channel Partners, Pune, 10-11 February 2017, "Trends in Comfort Cooling" discusses the history of cooling, the contribution of cooling to global warming, trends, and more. Visit http://ategroup.com/hmx/why-evaporative/ to learn more or e-mail us at contactus(at)ateindia(dot)com.
Indirect Evaporative Cooling
Cooling for people and process in ways that are healthy and eco-friendly.
For more information log on to www.ategroup.com
Viewers also liked (12)
Smart Technology and Service Suite Equipment Monitoring - Diesel Gensets
Smart Technology and Service Suite Equipment Monitoring - Diesel Gensets
Effective cooling solution for print and packaging industry
Effective cooling solution for print and packaging industry
Continuous Measurement and Verification for Energy Efficiency
Continuous Measurement and Verification for Energy Efficiency
Similar to Static charges on corona treater
Static charges in direct warping
Static in a warping machine can lead to fibre damage. Valstat® AC static eliminating bars help prevent this, as this application note shows.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges in plaiting
Electrostatic charges during the plaiting process can cause the fabric to get attracted towards metallic components, and dust attraction, among other things. Valence Electrons helps resolve such issues.
To find out more about Valence Electrons: ategroup.com/valence
Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/
Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/
Static charges in textile processing
During plaiting of fabric, high levels of electrostatic charges are generated resulting in unpleasant shocks, reduced product quality, and fabric tangles. Click on the link below to learn how AxisValence Valstat® static eliminators solve this problem.
Static charge elimination in nonwoven manufacturing
In a nonwoven manufacturing line, high levels of static charge are generated on the nonwoven fabric resulting in dust attraction, web wander, shocks to the operator, and sensor malfunction. Click here to understand how AxisValence combats these bothersome issues.
Electrostatic charging elimination in mask manufacturing line
Mask production needs to be done in hygienic conditions, free of dust and other contaminants. However, nonwoven fabrics used in the manufacturing of such masks can carry high levels of electrostatic charges, which attracts dust. AxisValence static eliminators are a simple solution to this problem. Click on the link below to learn more.
Static elimination in injection or blow moulding
During injection or blow moulding static electricity generated on moulded surfaces results in dust attraction, moulded components falling off conveyors and interference with electronic components. Click on the link below to find out how AxisValence Valstat® solves these annoying but serious problems.
Valence Valstat Contact Web Cleaner
Removal of loose particles, fibre, lint, and dust from moving film, foil, paper or fabric is necessary to ensure good product quality and improved productivity on label presses, printing, coating, slitting, thermo-forming, and other machines. Valence offers a broad range of web cleaning systems (contact and non-contact type) that cater to a wide range of applications. These web cleaners can clean either one or both sides of the web, depending on the application.
Electrostatic charging in flocking
The simple method of flocking can result in clogging on flocks, resulting in an undesirable, non-uniform layer of fibres on a substrate. Read this application note to learn how AxisValence's Valstat® PC series high voltage charging generator solves this problem efficiently.
Removing static charges on bottle filling lines
In the pharmaceutical industry, static charges attract dust that is detrimental to hygiene and cleanliness. Blowing ordinary compressed air is not effective, as dust clings to the bottle due to static charges. Click on the link below to know how AxisValence Valstat® provides a solution for this bothersome problem.
User guide powermax_series screens
Here is a user guide for one of the screens from Elite
Elite screens are available from Dukane.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact Dukane AV :
Phone: 800-676-2485
Fax: (630) 584-5156
Email: AVSales@Dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
Catalog ls susol mc_leaflet_e_0901
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Catalog ls susol mc_leaflet_e_0901_dienhathe.vn
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Abb Low Voltage Switchgears Dealer In Delhi
Greetings from power factor shop & SWITCHGEARS. At power POWER FACTOR SHOP & SWITCHGEARS,It is our endeavor to bring you state-of-the-art Products and Services for increasing the reliability & overall efficiency of your operation.
We are pleased to update you on Classification New AX Contactor range.
Similar to Static charges on corona treater (16)
Static charge elimination in nonwoven manufacturing
Static charge elimination in nonwoven manufacturing
Electrostatic charging elimination in mask manufacturing line
Electrostatic charging elimination in mask manufacturing line
More from A.T.E. Private Limited
SMIT 2FAST rapier weaving machines
SMIT's 2FAST weaving machine is a high speed, shuttle-less rapier loom with free-flight rapier ribbon movement, which enables weft insertion speeds of up to 1650 m/min. Equipped with dobby and ready for jacquard along with a variety of new features make the 2FAST highly desirable for the manufacture of almost all type of fabrics, including shirting, sarees and dress materials, home furnishing, terry and much more. Take a look at this presentation to find out more.
Renewing older POY, FDY, and BCF winders
Outdated synthetic machinery can pose a number of problems for manufacturers - such as frequent breakdowns, unavailability of spares, and expensive servicing. A.T.E. provides synthetic machine upgrades that not only improve machine performance but also expand the machine's life by over 10 years!
For more information visit www.ategroup.com.
Economic and eco-friendly heating solutions
Process heat requirement constitutes a large part of global energy demand. Solar thermal harnesses heat from the sun that can be effectively used for process heat requirements, and save upto 30% cost when compared to conventional energy sources like gas, diesel, electricity etc.
HMX offers solar thermal solutions for steam generation and high-temperature hot water for a range of applications such as process heating, CIP (clean in place), pasteurization, distillation, cooking, air heating, etc., across industries and commercial establishments.
Zimmer Coating Machines
Coating has become an important practice for adding value to textiles. Our principal, Zimmer Austria, offers a range of coating technologies such as knife, screen, over-roll, etc., for varied applications.
Advanced Wastewater Treatment Solutions
With depleting wastewater resources and with the renewed focus on health and hygiene, wastewater treatment has become more important than ever. With vast experience in treating wastewater across all industry segments around the world, A.T.E. HUBER offers the most efficient solutions for any complex wastewater treatment. Connect with us for more information.
KARL MAYER SIM.PLY - High-performance Spreading and Impregnation Line for Con...
KARL MAYER SIM.PLY - High-performance Spreading and Impregnation Line for Con...A.T.E. Private Limited
Introducing SIM.PLY, a technology from our principal (KARL MAYER) that offers a comprehensive and high-quality solution for manufacturing Continuous Fibre Reinforced Thermoplastic (CFRT) tapes. CFRT tapes have numerous applications such as automotive, construction, consumer products, etc. Connect with us to know more. Take a look at the presentation for more detailed information about the product.Textile manufacturing takes the active route
With growing income and increased health consciousness, the demand for activewear is booming in India. A.T.E. offers a complete range from leading machine manufacturers of equipment solutions for activewear manufacturing. Click here to learn more.
An overview of SMIT rapier weaving machines
SMIT, our principals, and a global leader in weaving technology, has a range of offerings that includes rapier weft insertion for home textiles, garments, terry towels and customized solutions to produce special technical fabrics. Connect with us to know more.
A.T.E.’s continuous dosing system to eliminate variations in CPB dyeing
In the CPB dyeing process, it is vital to maintain the exact 1:4 ratio of chemical to dye to produce fabric uniformly dyed. Conventional systems are unable to consistently maintain this ratio, leading to variations in tone, hue and depth along the length of the fabric dyed. Read this application note to find out how A.T.E.’s continuous dosing system eliminates this problem.
Spinning Accessories from A.T.E.
A.T.E. provides a wide range of accessories, components, and systems for textile spinning that are designed to improve performance and productivity. Please click on the link to learn more.
The Flexi weighting arms – a smart choice to replace pneumatic drafting on ri...
The Flexi weighting arms – a smart choice to replace pneumatic drafting on ri...A.T.E. Private Limited
TeraSpin's Flexi weighting arms are the simplest and most economical way to replace pneumatic drafting on your ring frames! Find out why, in this infographic!Textile wastewater solutions
Our innovative AAA® and SUF technologies for textile wastewater treatment help textile mills gain significant reductions in chemical consumption and sludge generation. Click here to know more.
A.T.E. HUBER Envirotech Packaged STP
A.T.E HUBER Envirotech's packaged sewage treatment plant is a self-contained 'plug & play' system that not only requires virtually no civil work and is low maintenance, but also consumes 30% less power, enhances the quality of treated water, and helps in de-nitrification.
Smart Sustainability Suite for Water and Wastewater Treatment plants
For more information visit www.ategroup.com/ecoaxis
Weighting arms for short staple and worsted ring frames
For more information visit www.ategroup.com/teraspin
Drafting and spindles for worsted spinning machines
For more information visit www.ategroup.com/teraspin
More from A.T.E. Private Limited (20)
KARL MAYER SIM.PLY - High-performance Spreading and Impregnation Line for Con...
KARL MAYER SIM.PLY - High-performance Spreading and Impregnation Line for Con...
A.T.E.’s continuous dosing system to eliminate variations in CPB dyeing
A.T.E.’s continuous dosing system to eliminate variations in CPB dyeing
The Flexi weighting arms – a smart choice to replace pneumatic drafting on ri...
The Flexi weighting arms – a smart choice to replace pneumatic drafting on ri...
Smart Sustainability Suite for Water and Wastewater Treatment plants
Smart Sustainability Suite for Water and Wastewater Treatment plants
Weighting arms for short staple and worsted ring frames
Weighting arms for short staple and worsted ring frames
Drafting and spindles for worsted spinning machines
Drafting and spindles for worsted spinning machines
Recently uploaded
Discover the innovative and creative projects that highlight my journey throu...
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
3.0 Project 2_ Developing My Brand Identity Kit.pptx
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
An introduction to the cryptocurrency investment platform Binance Savings.
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Maksym Vyshnivetskyi: PMO Quality Management (UA)
Maksym Vyshnivetskyi: PMO Quality Management (UA)
Lemberg PMO School 2024
Website – https://lembs.com/pmoschool
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Agency Managed Advisory Board As a Solution To Career Path Defining Business ...
Agency Managed Advisory Board
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Sustainability: Balancing the Environment, Equity & Economy
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
In the Adani-Hindenburg case, what is SEBI investigating.pptx
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
Recently uploaded (20)
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc
Discover the innovative and creative projects that highlight my journey throu...
Discover the innovative and creative projects that highlight my journey throu...
3.0 Project 2_ Developing My Brand Identity Kit.pptx
3.0 Project 2_ Developing My Brand Identity Kit.pptx
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc.pdf
Bài tập - Tiếng anh 11 Global Success UNIT 1 - Bản HS.doc.pdf
An introduction to the cryptocurrency investment platform Binance Savings.
An introduction to the cryptocurrency investment platform Binance Savings.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Agency Managed Advisory Board As a Solution To Career Path Defining Business ...
Agency Managed Advisory Board As a Solution To Career Path Defining Business ...
Sustainability: Balancing the Environment, Equity & Economy
Sustainability: Balancing the Environment, Equity & Economy
Set off and carry forward of losses and assessment of individuals.pptx
Set off and carry forward of losses and assessment of individuals.pptx
In the Adani-Hindenburg case, what is SEBI investigating.pptx
In the Adani-Hindenburg case, what is SEBI investigating.pptx
Static charges on corona treater
- 1. VALENCE ELECTRONS PRIVATE LIMITED 32 K R Colony, Domlur Layout, Bangalore 560 071, India T: +91-80-4125 6570 E: contact@valence.in W: www.ategroup.com/valence Registered Office: 43 Dr V B Gandhi Marg, Fort, Mumbai 400 023, India CIN: U74999MH2000PTC127595 Application note Published date: 31-12-2016 | Rev: 1A Page 1 Static charges on corona treater Problem On blown film lines, very high levels of static charges are generated after corona treatment. These charges can easily attract dust, dirt and contaminants from machine frames, floor and air onto the web. If not eliminated, these static charges can result in uncomfortable shocks to the operator with a risk of spark / fire hazard. Solution To overcome the problem, we recommend installing Valstat ® VR 20 AC static eliminating bars as soon as the web leaves the corona treater as shown in the above diagram.