Static charges in the J scray can hamper production. This application note on static neutralisers shows how to prevent this. To find out more about Valence Electrons: ategroup.com/valence Valence AC VS 20 Active Anti-static Eliminator: http://ategroup.com/valence/product-family/product-description/valstat-vs-20-active-ac-static-eliminator-2/ Valence Electron's range of static elimination products: http://ategroup.com/valence/value-enhancing-systems/product-family/control-of-static-electricity/

1. VALENCE ELECTRONS PRIVATE LIMITED
32 K R Colony, Domlur Layout, Bangalore 560 071, India
T: +91-80-4125 6570
E: contact@valence.in W: www.ategroup.com/valence
Registered Office: 43 Dr V B Gandhi Marg, Fort, Mumbai 400 023, India
CIN: U74999MH2000PTC127595
Application note
Published date: 08-06-2017 | Rev: 1A
Page 1
Static charges on J Scray and Batching
Problem
Static charges are created in fabric due to contact and separation from rollers, and changes in temperature.
The presence of static charges causes the fabric to cling to the rollers, thus hampering the free fall of the
fabric.
Solution
Valstat® AC static eliminators are best suited to avoid the problems of static charges in the J Scray. They can
be mounted in appropriate locations as shown in the above diagram.