The document provides instructions for fabricating different types of spouting and gutter pieces with specific dimensions. It includes instructions for marking and cutting profiles for integral stop ends, separate stop ends, circular pops, rectangular pops, quad spouting, and squareline gutter pieces. Dimensions and allowances are provided for laps, folds, and other features.

3. FABRICATION SPOUTING REVISION ( 65mm Circular Pop ) Circ. = 3.14xDiameter Circ. = 3.14 x 65 mm Circ. = 204 plus : (15mm seam allowance) Circ. = 219 mm 6mm peined edge Material Size : 219mm x100mm

4. FABRICATION SPOUTING REVISION ( 100mm x 50mm Rectangular Pop ) 7.5 50 50 100 50 50 7.5 48 48 98 48 48 10 Material Size : 215mm x 100mm Mark out and fabricate 100x50 tapered pop. Note : (5mm Grooved seam) Allow. for a 10mm fold on top edge and fit and rivet.

5. QUAD. SPOUTING REVISION x Y PROFILE MEASUREMENTS : X 115 mm (standard width) Y 13 mm (standard width) Total Allowance = 128 mm 90 0 Back Base Front Quad Spouting Profile Bead

6. FABRICATION SPOUTING REVISION 90 0 EXTERNAL ANGLE

7. 90 0 EXTERNAL ANGLE - MARK OUT 115 13 13 115 C/L C/L 25 mm laps 10 mm lap

8. FABRICATION SPOUTING REVISION 90 0 INTERNAL ANGLE

9. 90 0 INTERNAL ANGLE – MARK OUT 115 115 C/L C/L 25 mm laps 10 mm lap 13 13 3 mm fold

10. FABRICATION SPOUTING REVISION RETURN STOP END

11. 90 0 RETURN STOP END - MARK OUT 115 13 13 115 C/L C/L 10 mm lap

12. FABRICATION SPOUTING REVISION 135 0 EXTERNAL ANGLE

13. 135 0 EXTERNAL ANGLE - MARK OUT 48 7 7 48 C/L C/L 20 mm laps 7 mm lap

14. FABRICATION SPOUTING REVISION 135 0 INTERNAL ANGLE

15. 135 0 INTERNAL ANGLE – MARK OUT 48 48 C/L C/L 20 mm laps 7 mm lap 7 7 3 mm fold

16. FASCIA GUTTER REVISION x 90 0 PROFILE MEASUREMENTS x = 128 mm (standard width) Squareline Fascia Gutter Profile Front Base Back

17. FABRICATION SQUARELINE REVISION 90 0 EXTERNAL ANGLE

18. FABRICATION SQUARELINE REVISION 90 0 EXTERNAL ANGLE 128 mm 128 mm C/L C/L Back Base Front 25mm Laps C/L

19. FABRICATION SQUARELINE REVISION 90 0 INTERNAL ANGLE

20. FABRICATION SQUARELINE REVISION 90 0 INTERNAL ANGLE 128 mm 128 mm C/L C/L Back Base Front 25 mm Laps C/L

21. FABRICATION SQUARELINE REVISION RETURN STOP END

22. FABRICATION SQUARELINE REVISION RETURN STOP END 127 mm C/L C/L Back Base Front 25 mm Laps