Uploaded byDirectHitNozzles
850 views

Drect Hit DC43 Sewer Nozzle Assembly - How It Works

The document describes how to assemble and use a DC43 sewer nozzle cleaning device. It can be configured with different nozzle and ring combinations to clean pipes ranging from 100-150mm. The device cuts through blockages using a combination of 30 degree front and back nozzles. Rings are added to the front nozzle to enable cleaning of larger 150mm pipes with some cutting power provided to the front. Detailed images and instructions show how to assemble the device and switch between configurations.

Embed presentation

Download to read offline
DC43 Carriage Front 30° Front 24° Ring Cap Rings How to build your custom DC43 Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
Front 30° Front 24° Ring Cap Rings The DC43 back-to-back works in any of the 100mm pipe combinations shown below. © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® under 34 litres in 100mm lines DC43 back-to-back 30º 30º front 30º and back 30° DC43 Carriage
Front 30° Front 24° Ring Cap Rings DC43 back-to-back (front and back reverse turbo nozzles) DC43 Carriage YES YES YES YES YES YES YES YES YES DC43 back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Adjust assembly to suit 100 & 150 lines Clean manholes, shafts, pits & hydro excavate NO NO NO YES YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose Cut tree roots FAST Penetrate tree roots FAST
The DC43 carriage. Front 30° Front 24° Ring Cap Back 30° Rings Front view Side view Note: the DC43T carriage has a oring on each side Back view PCT/AU2012/000326 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage
Take your back nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Take your carriage Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Top view
Take the 30 degree front nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Take the 30 degree front nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º Screw and tighten up the front nozzle through the carriage into the back nozzle © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º Place assembly in the pipe © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43 traveling this way hits the blockage 90mm 24º tree root blockage cut & thrust Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage © Copyright Jim Paris 2013 150mm 100mm go back and forward 90mm 90mm 24º tree root blockage cut 24º How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings tree root blockage cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm 24º DC43 is through the blockage 90mm Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43 is cutting through the blockage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 is cutting through the blockage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 has cut the root blockage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Remove the ring cap Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the 30 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 30 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 30º Place assembly in the pipe 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water on 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
30º Remove assembly from the pipe Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Remove ring from front nozzle and install it to the back nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
30º Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Remove front nozzle 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the Ring Cap 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Screw in the ring cap trough the carriage into the back nozzle with your ring spanner 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Place assembly in the pipe 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage
Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º Turn the water off 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Remove ring from back nozzle 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º Remove Ring Cap 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Take the 24 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
24º Front 30° Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 24 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º Place assembly in the pipe 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Turn the water on Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
Front 30° Front 24° Ring Cap Rings 24º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
DIRECT HIT® © Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com

More Related Content

PDF
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
byDirectHitNozzles
 
PDF
Direct Hit DC38 Sewer Nozzle Assembly
byDirectHitNozzles
 
PDF
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
byDirectHitNozzles
 
PDF
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
byDirectHitNozzles
 
PDF
C43rs the all purpose (short) penetrator
byDirectHitNozzles
 
PDF
Direct Hit Extreme (Short) Penetrator (C38rs)
byDirectHitNozzles
 
PDF
C43t Sewer Nozzle Assembly
byDirectHitNozzles
 
PDF
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
byDirectHitNozzles
 
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") lines
byDirectHitNozzles
 
Direct Hit DC38 Sewer Nozzle Assembly
byDirectHitNozzles
 
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)
byDirectHitNozzles
 
Extreme Long Penetrator (C38r) Sewer Nozzle Assembly
byDirectHitNozzles
 
C43rs the all purpose (short) penetrator
byDirectHitNozzles
 
Direct Hit Extreme (Short) Penetrator (C38rs)
byDirectHitNozzles
 
C43t Sewer Nozzle Assembly
byDirectHitNozzles
 
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked Drains
byDirectHitNozzles
 

What's hot

PDF
Massey ferguson MF 7250, 7252 parts catalog
byPartCatalogs Net
 
PDF
Massey ferguson MF 7242 Combine - 1637439 parts catalog
byPartCatalogs Net
 
PDF
Massey ferguson Mf 7274 7278 parts catalog
byPartCatalogs Net
 
PDF
Massey ferguson mf 30 combines ( 53050) parts catalogue manual
byfhhjsjekmdme
 
PDF
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
byIBS MRO
 
PDF
Massey ferguson mf 7272 cerea combines parts catalogue manual
byhhfjksekmm
 
PDF
OzLinc Industries High Pressure Fittings Catalogue
byozlincau
 
PDF
пневмомеханика
bymashresurs
 
PDF
электроника и микромеханика
bymashresurs
 
PDF
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
byDirectHitNozzles
 
PDF
искробезопасный инструмент
bymashresurs
 
PDF
ключи динамометрические и мультипликаторы
bymashresurs
 
PDF
молотки, стамески
bymashresurs
 
PDF
ключи патронные и принадлежности
bymashresurs
 
PDF
отвертки, г образные ключи и насадки
bymashresurs
 
Massey ferguson MF 7250, 7252 parts catalog
byPartCatalogs Net
 
Massey ferguson MF 7242 Combine - 1637439 parts catalog
byPartCatalogs Net
 
Massey ferguson Mf 7274 7278 parts catalog
byPartCatalogs Net
 
Massey ferguson mf 30 combines ( 53050) parts catalogue manual
byfhhjsjekmdme
 
Catalog dụng cụ cầm tay, máy cầm tay, kim khí 2015
byIBS MRO
 
Massey ferguson mf 7272 cerea combines parts catalogue manual
byhhfjksekmm
 
OzLinc Industries High Pressure Fittings Catalogue
byozlincau
 
пневмомеханика
bymashresurs
 
электроника и микромеханика
bymashresurs
 
Direct Hit DC43t Sewer Nozzle and Drain Clearing Assembly - How It Works
byDirectHitNozzles
 
искробезопасный инструмент
bymashresurs
 
ключи динамометрические и мультипликаторы
bymashresurs
 
молотки, стамески
bymashresurs
 
ключи патронные и принадлежности
bymashresurs
 
отвертки, г образные ключи и насадки
bymashresurs
 

Similar to Drect Hit DC43 Sewer Nozzle Assembly - How It Works

PDF
Bop cameron
byjaoliver
 
PDF
18. New C43rs How it works.pdf
byDirectHitNozzles
 
PDF
Komatsu PW220-7K Hydraulic Excavator Service Repair Manual SN:K40001 and up
byjfksmemfmm
 
PDF
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf
byjiangshou26
 
PDF
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf
byfragmentkqdpry
 
PDF
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf
bypaidongzhong6790
 
PDF
Pc35 mr service manual
byWarunaMunasingha
 
PDF
Pc35 mr 3 (2)
byWarunaMunasingha
 
PDF
Volvo Ec140blc LCM d4d Eae1 2124351640 2002 09.pdf
byabjekGoogle
 
PDF
Minifok
byKosmakMachine
 
PPTX
Prospect Presentation_
byMike Burkett
 
PDF
Wheel Dozers - WD600-3
bykomatsuindia
 
PDF
Omni China CNC Router Catalog
byOMNI CNC Technology Co.,Ltd
 
PDF
C43r Sewer Nozzle Assembly
byDirectHitNozzles
 
PDF
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdf
byfusjekkdkdme3
 
PDF
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdf
byfusedkdd9idi
 
PDF
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdf
byfujksekd9dokd
 
PDF
20120429
bykihonam
 
PDF
Cisaille plan
bylinkindus
 
PDF
Cisaille plan
bylinkindus
 
Bop cameron
byjaoliver
 
18. New C43rs How it works.pdf
byDirectHitNozzles
 
Komatsu PW220-7K Hydraulic Excavator Service Repair Manual SN:K40001 and up
byjfksmemfmm
 
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf
byjiangshou26
 
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf
byfragmentkqdpry
 
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdf
bypaidongzhong6790
 
Pc35 mr service manual
byWarunaMunasingha
 
Pc35 mr 3 (2)
byWarunaMunasingha
 
Volvo Ec140blc LCM d4d Eae1 2124351640 2002 09.pdf
byabjekGoogle
 
Minifok
byKosmakMachine
 
Prospect Presentation_
byMike Burkett
 
Wheel Dozers - WD600-3
bykomatsuindia
 
Omni China CNC Router Catalog
byOMNI CNC Technology Co.,Ltd
 
C43r Sewer Nozzle Assembly
byDirectHitNozzles
 
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdf
byfusjekkdkdme3
 
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdf
byfusedkdd9idi
 
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdf
byfujksekd9dokd
 
20120429
bykihonam
 
Cisaille plan
bylinkindus
 
Cisaille plan
bylinkindus
 

More from DirectHitNozzles

PDF
The C38rs: How it works
byDirectHitNozzles
 
PDF
C38rs How it works.pdf
byDirectHitNozzles
 
PDF
C43 Cap To Back Sewer Nozzle Kit
byDirectHitNozzles
 
PDF
C43T Cap Starter Kit Add Ons
byDirectHitNozzles
 
PDF
C43 Cap to Back Nozzle Assembly
byDirectHitNozzles
 
PDF
C38r Nozzle Assembly for over 34
byDirectHitNozzles
 
PDF
C43 Back To Back Nozzle Assembly
byDirectHitNozzles
 
PDF
C38 Sewer Nozzle Assembly
byDirectHitNozzles
 
PDF
C38 Cap To Back Root Cutting Assembly
byDirectHitNozzles
 
PDF
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
byDirectHitNozzles
 
PDF
17. C38rs with 3 x side jet Carriage and How it works.pdf
byDirectHitNozzles
 
PDF
C38 Cap Starter Kit For Pumps Under 21 litres per minute
byDirectHitNozzles
 
The C38rs: How it works
byDirectHitNozzles
 
C38rs How it works.pdf
byDirectHitNozzles
 
C43 Cap To Back Sewer Nozzle Kit
byDirectHitNozzles
 
C43T Cap Starter Kit Add Ons
byDirectHitNozzles
 
C43 Cap to Back Nozzle Assembly
byDirectHitNozzles
 
C38r Nozzle Assembly for over 34
byDirectHitNozzles
 
C43 Back To Back Nozzle Assembly
byDirectHitNozzles
 
C38 Sewer Nozzle Assembly
byDirectHitNozzles
 
C38 Cap To Back Root Cutting Assembly
byDirectHitNozzles
 
C43 Cap To Back Starter Kit For Pumps Under 21 litres per minute
byDirectHitNozzles
 
17. C38rs with 3 x side jet Carriage and How it works.pdf
byDirectHitNozzles
 
C38 Cap Starter Kit For Pumps Under 21 litres per minute
byDirectHitNozzles
 

Drect Hit DC43 Sewer Nozzle Assembly - How It Works

  • 1.
    DC43 Carriage Front30° Front 24° Ring Cap Rings How to build your custom DC43 Starter Kit assembly and then add to it © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® www.DirectHitSewerNozzles.com M: 23 09 14
  • 2.
    Front 30° Front24° Ring Cap Rings The DC43 back-to-back works in any of the 100mm pipe combinations shown below. © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º DIRECT HIT® under 34 litres in 100mm lines DC43 back-to-back 30º 30º front 30º and back 30° DC43 Carriage
  • 3.
    Front 30° Front24° Ring Cap Rings DC43 back-to-back (front and back reverse turbo nozzles) DC43 Carriage YES YES YES YES YES YES YES YES YES DC43 back-to-back in 100 mm lines (what can it go through, around, up or down) © Copyright Jim Paris 2013 PCT/AU2012/000326 Back 30° 100 MM 150 MM 225 MM 30º 30º 24º Clean drain walls Unblock grease, soap etc. Remove sand from lines & grates Harden deposits, lime, cement etc. Ice in drains Adjust assembly to suit 100 & 150 lines Clean manholes, shafts, pits & hydro excavate NO NO NO YES YES YES YES YES YES 80 mm using 03 Hose 90 mm using 03 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 100 mm using 03 or 04 Hose 50 mm Min Access No 50 mm Bend 150 mm using 03 or 04 Hose Cut tree roots FAST Penetrate tree roots FAST
  • 4.
    The DC43 carriage. Front 30° Front 24° Ring Cap Back 30° Rings Front view Side view Note: the DC43T carriage has a oring on each side Back view PCT/AU2012/000326 100 MM 150 MM 225 MM 30º 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage
  • 5.
    Take your backnozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 6.
    Take your carriage Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 7.
    Front 30° Front24° Ring Cap Back 30° Rings PCT/AU2012/000326 30º 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 8.
    Take the 30degree front nozzle Front 30° Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 9.
    Take the 30degree front nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 10.
    30º Front 30°Front 24° Ring Cap Back 30° Rings 30º PCT/AU2012/000326 100 MM 150 MM 225 MM 24º Screw and tighten up the front nozzle through the carriage into the back nozzle © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 11.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º Place assembly in the pipe © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 12.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water on 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 13.
    Front 30° Front24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 420mm 150mm 420mm 230mm 100mm 230mm cut cut & thrust assembly travelling this way 100 MM 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 14.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings 420mm 150mm 230mm cut 24º © Copyright Jim Paris 2013 100mm DC43 traveling this way hits the blockage 90mm 24º tree root blockage cut & thrust Side view
  • 15.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage © Copyright Jim Paris 2013 150mm 100mm go back and forward 90mm 90mm 24º tree root blockage cut 24º How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings Side view
  • 16.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings tree root blockage cut 24º cut & thrust © Copyright Jim Paris 2013 150mm 100mm 24º DC43 is through the blockage 90mm Side view
  • 17.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 24º tree root blockage cut & thrust 24º 100mm DC43 is cutting through the blockage Side view
  • 18.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 is cutting through the blockage Side view
  • 19.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º DC43 Carriage How does the DC43 with its 30º front & back turbo nozzle work in 100-150mm with no rings © Copyright Jim Paris 2013 150mm 100mm cut & thrust DC43 has cut the root blockage Side view
  • 20.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 21.
    Front 30° Front24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 22.
    Front 30° Front24° Ring Cap Back 30° Rings Remove front 30 degree turbo nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 23.
    Front 30° Front24° Ring Cap Back 30° Rings Take the Ring Cap 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 24.
    Front 30° Front24° Ring Cap Back 30° Rings Screw and tighten up the Ring Cap through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 25.
    Front 30° Front24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 26.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 27.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 28.
    Front 30° Front24° Ring Cap Back 30° Rings How the assembly works in 100 pipe and 150 mm pipes 150mm 420mm 100mm 230mm cut cut & thrust assembly traveling this way with 100% back cutting power 100 MM 150 MM 225 MM 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 29.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 30.
    Front 30° Front24° Ring Cap Back 30° Rings Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 31.
    Remove the ringcap Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 32.
    Front 30° Front24° Ring Cap Back 30° Rings Take the 30 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 33.
    Front 30° Front24° Ring Cap Back 30° Rings Screw and tighten up the front 30 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 34.
    Front 30° Front24° Ring Cap Back 30° Rings 30º Take the 100 mm Ring 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 35.
    Front 30° Front24° Ring Cap Back 30° Rings 30º Add the ring to the front nozzle 100 MM 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 36.
    Front 30° Front24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 37.
    Front 30° Front24° Ring Cap Back 30° Rings 30º Add the ring 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 38.
    Front 30° Front24° Ring Cap Back 30° Rings 30º Add the cir clip 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 39.
    Front 30° Front24° Ring Cap Back 30° Rings 30º Place assembly in the pipe 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 40.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water on 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 41.
    Front 30° Front24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes 290mm 150mm front cut cut & thrust assembly traveling this way you will have from 20 to 40% front cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 42.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 43.
    30º Remove assemblyfrom the pipe Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 44.
    Remove ring fromfront nozzle and install it to the back nozzle 30º Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 45.
    30º Front 30°Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 46.
    30º Front 30°Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 47.
    30º Front 30°Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 48.
    30º Front 30°Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 49.
    30º Front 30°Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 50.
    Turn the wateron Front 30° Front 24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 51.
    Front 30° Front24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 52.
    Front 30° Front24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have from 60 to 80% back cutting power 150 MM 225 MM 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 53.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water off 150 MM 225 MM 24º 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 54.
    30º Front 30°Front 24° Ring Cap Back 30° Rings Remove assembly from the pipe 150 MM 225 MM 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 55.
    Front 30° Front24° Ring Cap Back 30° Rings Remove front nozzle 150 MM 225 MM 24º 30º PCT/AU2012/000326 30º © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 56.
    Front 30° Front24° Ring Cap Back 30° Rings Take the Ring Cap 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 57.
    Front 30° Front24° Ring Cap Back 30° Rings Screw in the ring cap trough the carriage into the back nozzle with your ring spanner 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 58.
    Front 30° Front24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Place assembly in the pipe 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 59.
    Front 30° Front24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º Turn the water on 30º © Copyright Jim Paris 2013 DC43 Carriage
  • 60.
    Front 30° Front24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 61.
    Front 30° Front24° Ring Cap Back 30° Rings How do rings work in 150 mm pipes with a ring cap 150mm 290mm front cut cut & thrust assembly traveling this way you will have 100% back cutting power 150 MM 225 MM 24º 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 62.
    Front 30° Front24° Ring Cap Back 30° Rings 225 MM 24º 150 MM 30º Turn the water off 30º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 63.
    Front 30° Front24° Ring Cap Back 30° Rings Remove assembly from the pipe 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 64.
    Front 30° Front24° Ring Cap Back 30° Rings Remove ring from back nozzle 225 MM 24º 150 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 65.
    Front 30° Front24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 66.
    Front 30° Front24° Ring Cap Back 30° Rings 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 67.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º Remove Ring Cap 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 68.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 24º 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 69.
    Front 30° Front24° Ring Cap Back 30° Rings Take the 24 degree front nozzle 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 70.
    24º Front 30°Front 24° Ring Cap Back 30° Rings Screw and tighten up the front 24 degree nozzle through the carriage into the back nozzle 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 71.
    Front 30° Front24° Ring Cap Back 30° Rings Place assembly in the pipe 100 MM 150 MM 225 MM 30º 24º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 72.
    Front 30° Front24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º Place assembly in the pipe 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 73.
    Turn the wateron Front 30° Front 24° Ring Cap Back 30° Rings 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 74.
    Front 30° Front24° Ring Cap Back 30° Rings 30º How the assembly works in 100 pipe and 150 mm pipes 630mm 150mm 420mm 380mm 100mm 230mm better* penetration cut cut & thrust 100 MM 150 MM 225 MM assembly traveling this way with 24 degree front will have better* penetration power © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 75.
    Front 30° Front24° Ring Cap Back 30° Rings Turn the water off 100 MM 150 MM 225 MM 30º 30º 24º © Copyright Jim Paris 2013 DC43 Carriage Side view
  • 76.
    Front 30° Front24° Ring Cap Rings 24º THE END Back 30° Remove assembly from the pipe 100 MM 150 MM 225 MM 30º 30º PCT/AU2012/000326 © Copyright Jim Paris 2013 DC43 Carriage Top view
  • 77.
    DIRECT HIT® ©Copyright Jim Paris 2013 M: 23 09 14 www.DirectHitSewerNozzles.com