Spacer kit instructions
•
0 likes•2,172 views
This document provides installation instructions for a keyboard track spacer kit. It includes diagrams and lists of included parts like spacers, screws, and brackets. The instructions are: 1) Measure the height needed to clear any obstructions and choose the right spacer/screw combination. 2) Assemble the spacers and brackets to the keyboard track using the screws and nuts provided. 3) Attach the track/spacer assembly to the underside of the work surface using wood screws through the mounting brackets.
Report
Share
Report
Share
Download to read offline
Recommended
ZipView Dual Monitor Arm - Assembly
The document provides assembly and installation instructions for a dual monitor arm. It contains:
1) A parts list and descriptions of the assembly methods using either a clamp or grommet mount. The clamp method attaches the arm base to the desk with a clamp and the grommet method secures it through a desk grommet hole.
2) Instructions for installing the monitors by attaching VESA mounts and routing cables through covers on the monitor arms.
3) Details on weight and tilt adjustments that can be made using Allen keys to configure how the arms support the monitors.
ZipView Single Monitor Arm - Assembly
This document provides assembly and installation instructions for a single monitor arm. It includes a parts list and describes two methods for attaching the base to a work surface - using a clamp or securing it through a grommet hole. It then explains how to attach the monitor to the VESA mount, route cables, and make adjustments to the monitor arm for weight and tilt.
iMovR TopView Single Monitor Arm Instructions
TopView features reliable and smooth gas spring adjustment control that supports a 12-inch dynamic height adjustment range. This allows the user to adjust the height and position of a monitor weighing up to 17.6 pounds with minimal effort. Retracting to a 4-inch depth and extending 23.5 inches.
Tempo tread top-office_chair_manual
Installation instructions for the iMovR Tempo Tread-Top Office Chair. Ergonomic design reduces pressure points, improves posture, and promotes airflow for a comfortable seating experience at extended durations.
iMovR TopView Max Monitor Arm
The TopView Max is our heavy-duty single monitor arm that has an impressive maximum holding capacity of 42 lbs, ideal for heavier, large-format monitors, iMacs* and all-in-one PCs. Features the same reliable and smooth gas spring adjustment control as the non heavy-duty version, but with an increased dynamic height adjustment range of 13.8-inches to accommodate larger monitors.
TopView Heavy Duty
By and large the greatest weight capacity per arm. Boasting an additional 12 lb capacity over the Tempo HD and 22.75 lb capacity over the Edge 2 Max. Perfect for screen sizes beyond traditional dimensions. Pair two or more Edge Max Monitor Arms together for the ultimate multi-screen arrangement.
iMovR TopView Dual Monitor Arm
The TopView Dual is a dual monitor arm that provides effortless adjustment of monitors, including height adjustment between 7-19 inches, arm extension of 23.5 inches, monitor tilt of ±90 degrees, VESA rotation of ±90 degrees, and a 180 degree lock-out feature. It has a weight capacity of 6.5-17.6 pounds per arm and includes both a desk clamp and grommet mount for installation. The TopView Dual has a 15 year warranty.
iMovR TopView Single Monitor Arm
TopView features reliable and smooth gas spring adjustment control that supports a 12-inch dynamic height adjustment range. This allows the user to adjust the height and position of a monitor weighing up to 17.6 pounds with minimal effort. Retracting to a 4-inch depth and extending 23.5 inches.
Recommended
ZipView Dual Monitor Arm - Assembly
The document provides assembly and installation instructions for a dual monitor arm. It contains:
1) A parts list and descriptions of the assembly methods using either a clamp or grommet mount. The clamp method attaches the arm base to the desk with a clamp and the grommet method secures it through a desk grommet hole.
2) Instructions for installing the monitors by attaching VESA mounts and routing cables through covers on the monitor arms.
3) Details on weight and tilt adjustments that can be made using Allen keys to configure how the arms support the monitors.
ZipView Single Monitor Arm - Assembly
This document provides assembly and installation instructions for a single monitor arm. It includes a parts list and describes two methods for attaching the base to a work surface - using a clamp or securing it through a grommet hole. It then explains how to attach the monitor to the VESA mount, route cables, and make adjustments to the monitor arm for weight and tilt.
iMovR TopView Single Monitor Arm Instructions
TopView features reliable and smooth gas spring adjustment control that supports a 12-inch dynamic height adjustment range. This allows the user to adjust the height and position of a monitor weighing up to 17.6 pounds with minimal effort. Retracting to a 4-inch depth and extending 23.5 inches.
Tempo tread top-office_chair_manual
Installation instructions for the iMovR Tempo Tread-Top Office Chair. Ergonomic design reduces pressure points, improves posture, and promotes airflow for a comfortable seating experience at extended durations.
iMovR TopView Max Monitor Arm
The TopView Max is our heavy-duty single monitor arm that has an impressive maximum holding capacity of 42 lbs, ideal for heavier, large-format monitors, iMacs* and all-in-one PCs. Features the same reliable and smooth gas spring adjustment control as the non heavy-duty version, but with an increased dynamic height adjustment range of 13.8-inches to accommodate larger monitors.
TopView Heavy Duty
By and large the greatest weight capacity per arm. Boasting an additional 12 lb capacity over the Tempo HD and 22.75 lb capacity over the Edge 2 Max. Perfect for screen sizes beyond traditional dimensions. Pair two or more Edge Max Monitor Arms together for the ultimate multi-screen arrangement.
iMovR TopView Dual Monitor Arm
The TopView Dual is a dual monitor arm that provides effortless adjustment of monitors, including height adjustment between 7-19 inches, arm extension of 23.5 inches, monitor tilt of ±90 degrees, VESA rotation of ±90 degrees, and a 180 degree lock-out feature. It has a weight capacity of 6.5-17.6 pounds per arm and includes both a desk clamp and grommet mount for installation. The TopView Dual has a 15 year warranty.
iMovR TopView Single Monitor Arm
TopView features reliable and smooth gas spring adjustment control that supports a 12-inch dynamic height adjustment range. This allows the user to adjust the height and position of a monitor weighing up to 17.6 pounds with minimal effort. Retracting to a 4-inch depth and extending 23.5 inches.
Tempo Dual Screen Two-Arm Manual
This installation manual provides instructions for installing a dual monitor support arm system that can hold between 10-40 pounds total. It warns that the installer must verify the attachment surface can safely support the equipment weight and improper installation may cause damage or injury. The instructions cover mounting the arm to the work surface using either a grommet plate or clamp assembly. Additional steps include mounting the monitors, adjusting counterbalances, managing cables, setting a rotation limiter, and adjusting tilt tension.
iMovR TopView Dual Monitor Arm
The document provides assembly and installation instructions for a dual monitor arm. It includes:
- A list of all included parts and required tools
- Instructions for installing the base assembly using either a clamp or grommet mounting method
- Directions for attaching the monitor arms and installing the monitors using VESA plates
- Steps for cable management and using the 180 degree lock-out feature
- Guidance on adjusting arm tensions for swivels, tilts, and appropriate monitor weights
Tech Dock Instruction Manual
The document is an instruction manual for assembling a Tech Dock. It includes a parts list and steps for installing the dock either with or without a track. The assembly requires securing brackets, covers, and adjustable supports using screws, knobs, and an Allen wrench. Cautions are given to not exceed the listed 15 lb weight limit to avoid injury or damage.
iMovR ZipView Unison Dual Monitor Arm with Handle - Instruction Manual
This document provides assembly and installation instructions for a dual monitor arm. It includes a parts list and describes two methods for attaching the base - either using a clamp that fits surfaces between 3/8-3 1/4 inches thick, or securing it through a grommet hole. Monitors are attached to VESA mounts and cables are routed through covers. The monitor arm has adjustments for weight and tilt using included Allen keys.
ZipView Unison Dual Monitor Arm with Handle User Manual
Assembly and installation instructions for the ZipView Unison Dual Monitor Arm with Handle from iMovR.
iMovR TopView Max Unison Monitor Arm
The TopView Max Unison Dual Monitor Arm holds two monitors via a crossbar for a combined weight of 38.5 lbs. The crossbar fixes side by side alignment of two monitors which is especially convenient to adjust the height of the monitors when making the change from sit to stand at a height-adjustable desk. Features the same reliable and smooth gas spring adjustment control as the non heavy-duty version, but with a slightly increased dynamic height adjustment range 13.8-inches total. This allows the user to adjust the height and position of a monitor minimal effort.
iMovR Cadence Standing Desk Converter Installation Manual
This 3-sentence summary provides the high-level steps for installing a sit-stand workstation:
The document provides installation instructions over 8 pages for a sit-stand workstation, including installing the base on a desk through either clamp or grommet mounting, attaching the arm and mounting the work surface and keyboard tray, then installing the monitor and managing cables. The instructions describe counterbalancing the arm, leveling and tension adjustments, and include warnings about proper installation and disclaimers about liability.
Cubicle curtain track fitting instructions
Fitting instructions for Direct Fabrics Cubicle Curtain track. NHS approved Cubicle Curtain Track. See the full range - http://www.direct-fabrics.co.uk/cubicle-curtain-track-all-option-sizes.html
Tempo Light, Heavy, Dual Screen Manuals
This document provides installation instructions for single and dual monitor support arms. It describes how to mount the arm to a work surface using either a grommet hole or clamp, how to attach monitors to the arm, how to balance the arm counterweight, and how to route cables. Warnings are given to read all instructions before installation and to verify the surface can support the equipment weight.
iMovR Xtend Monitor Arm Manual
1. The document provides assembly instructions for the Xtend 7818J Series monitor arm. It includes a parts list and diagrams showing how to assemble, mount, adjust, and use the arm and its components.
2. The instructions describe how to mount the base assembly to a work surface using either a clamp or grommet mounting system, attach the arm assembly to the base, and mount a monitor to the arm using a VESA plate.
3. Additional sections cover adjusting the arm tension, joint torque, and tilt, as well as using the cable managers to route cables.
Trackless keyboardtray manual
1) The document provides instructions for installing a Trackless Keyboard Tray, including drilling pilot holes, attaching the keyboard platform and arm, and installing the mouse fence.
2) It describes assembling the keyboard tray parts, extending the arm into place and securing it with screws, and snapping on the mouse fence.
3) The final section explains how to use the installed keyboard tray, including tilting and positioning the keyboard and mouse platforms, adjusting the tray height and rotating it.
Cadence plus installation manual
Stand or sit at work with the Cadence Plus, a two-tiered desk converter that hovers over your desk surface and allows users to experience the health benefits of standing at work. Combining elegant design aesthetics, durability, adjustability and best-in-class stability in one affordable unit. The Cadence Plus offers ultra-flexibility for your workstation using a gas-assisted counter-balance arm with 180-degree rotation and 22" height range.
iMovR Lander L-Desk Instruction Manual (w or w/o built-in SteadyType Keyboard...
This installation manual provides instructions for assembling an adjustable height L-desk. It has 13 steps for assembling the desk legs, tabletop, return, and controller. It also provides information on setting height favorites and reminders on the controller to encourage standing. The intuitive controller allows for smooth height adjustments and storing preferred standing and sitting positions.
Concerto Monitor Arm Manual
This document provides assembly instructions for mounting multiple monitor displays on an adjustable arm system. It includes the following:
1. Instructions are given for assembling the base pole mount, extension arms, and dual monitor hubs to attach displays at the desired heights and locations.
2. Directions are provided for mounting the pole to surfaces using either a clamp or grommet system, as well as mounting to a wall or slat wall.
3. Steps are outlined for adjusting the tension on movable arm joints and height adjustable segments to properly counterbalance attached monitors.
Risk assesment of 4 storey building
This document summarizes the results of a safety inspection conducted on a 4-story building. It assessed compliance with guard rail systems, personal fall arrest systems, and safety net systems. Guard rails were 75% compliant for top and toe rails but 88% for mid rails. Personal fall arrest anchorage connectors and body belts were 63% compliant while connecting devices were only 38% compliant. Safety nets were 50% compliant. In total, safety compliance across all criteria was calculated at 64.28%. The document recommends inspecting fall protection before each use, recording unsafe behaviors, providing fall protection training to workers, and conducting investigations and program evaluations to improve safety.
model #2340 articulator /cosmetic dentistry courses
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
00919248678078
Upsilon Adjustable-Height Desk System Installation Manual
This installation manual provides instructions for assembling an adjustable height desk system. The summary is:
1. The manual guides the user through assembling the desk base including attaching legs, crossbars, support arms and extension channels.
2. Next, the user is instructed to attach the assembled base to the desk top using provided screws.
3. Finally, the user connects control cables and plugs in the power supply to complete assembly and initialize the desk for operation.
ThermoDesk ELITE Adjustable-Height Desk System - Installation and User Manual
This document provides installation and user instructions for the ThermoDesk ELITE adjustable height desk system. It includes a 10 step assembly process with diagrams to attach the legs, crossbars, support arms and install the table top. It also provides instructions for setting and adjusting the desk height using the digital controller, and maintaining and troubleshooting the desk system. The warranty covers defects in materials and workmanship for 20 years on the steel frame, 10 years on moving parts, and 5 years on the table tops.
Omega Everest Electric Adjustable-Height Desk Manual
This document provides installation instructions for assembling an Omega Everest 3D-adjustable sit-stand desk system. The instructions are presented over 14 steps and include attaching the feet and lifting legs, crossbars, top support arms, affixing the base to the table top, installing the power supply and cables, mounting the digital hand controller, assembling the optional keyboard platform, and attaching bumpers and cable guides. Diagrams accompany each step to illustrate proper assembly.
EVANNEX EcoHitch for Tesla Model S Install Guide
This document provides installation instructions for installing a tow hitch on a 2012-2016 Tesla Model S. It involves removing various underbody panels and the rear bumper fascia. The hitch plate attaches to existing studs on the frame and additional brackets are installed to reinforce it. A template is provided to cut an access hole in the bumper for the tow ball. Proper safety precautions and labeling of removed hardware is recommended. The installation is designed for up to 200 lbs of tongue weight and 2000 lbs of towing capacity.
Toughbox-Assembly-Instructions
This document provides assembly instructions for an AndyMark Toughbox in 10 steps. It includes a parts list and diagrams showing how to assemble the various gears and plates using specific fasteners. It also describes how to attach an encoder package for measuring output, including tapping holes in the mount plate, assembling the encoder circuit board and base, and mounting it to the assembled toughbox.
Zipblock inst
El sistema de junta de expansión ZB 200/400 es un sello elastomérico de EPDM extruido de una pieza con orificios integrales, unidos en una cama de epoxi de alta resistencia, diseñado para su uso en aplicaciones de plataformas de estacionamiento. El sistema resultante se sella a cada lado con un sellador de uretano, lo que da como resultado un sistema de unión extremadamente duradero y hermético.
More Related Content
What's hot
Tempo Dual Screen Two-Arm Manual
This installation manual provides instructions for installing a dual monitor support arm system that can hold between 10-40 pounds total. It warns that the installer must verify the attachment surface can safely support the equipment weight and improper installation may cause damage or injury. The instructions cover mounting the arm to the work surface using either a grommet plate or clamp assembly. Additional steps include mounting the monitors, adjusting counterbalances, managing cables, setting a rotation limiter, and adjusting tilt tension.
iMovR TopView Dual Monitor Arm
The document provides assembly and installation instructions for a dual monitor arm. It includes:
- A list of all included parts and required tools
- Instructions for installing the base assembly using either a clamp or grommet mounting method
- Directions for attaching the monitor arms and installing the monitors using VESA plates
- Steps for cable management and using the 180 degree lock-out feature
- Guidance on adjusting arm tensions for swivels, tilts, and appropriate monitor weights
Tech Dock Instruction Manual
The document is an instruction manual for assembling a Tech Dock. It includes a parts list and steps for installing the dock either with or without a track. The assembly requires securing brackets, covers, and adjustable supports using screws, knobs, and an Allen wrench. Cautions are given to not exceed the listed 15 lb weight limit to avoid injury or damage.
iMovR ZipView Unison Dual Monitor Arm with Handle - Instruction Manual
This document provides assembly and installation instructions for a dual monitor arm. It includes a parts list and describes two methods for attaching the base - either using a clamp that fits surfaces between 3/8-3 1/4 inches thick, or securing it through a grommet hole. Monitors are attached to VESA mounts and cables are routed through covers. The monitor arm has adjustments for weight and tilt using included Allen keys.
ZipView Unison Dual Monitor Arm with Handle User Manual
Assembly and installation instructions for the ZipView Unison Dual Monitor Arm with Handle from iMovR.
iMovR TopView Max Unison Monitor Arm
The TopView Max Unison Dual Monitor Arm holds two monitors via a crossbar for a combined weight of 38.5 lbs. The crossbar fixes side by side alignment of two monitors which is especially convenient to adjust the height of the monitors when making the change from sit to stand at a height-adjustable desk. Features the same reliable and smooth gas spring adjustment control as the non heavy-duty version, but with a slightly increased dynamic height adjustment range 13.8-inches total. This allows the user to adjust the height and position of a monitor minimal effort.
iMovR Cadence Standing Desk Converter Installation Manual
This 3-sentence summary provides the high-level steps for installing a sit-stand workstation:
The document provides installation instructions over 8 pages for a sit-stand workstation, including installing the base on a desk through either clamp or grommet mounting, attaching the arm and mounting the work surface and keyboard tray, then installing the monitor and managing cables. The instructions describe counterbalancing the arm, leveling and tension adjustments, and include warnings about proper installation and disclaimers about liability.
Cubicle curtain track fitting instructions
Fitting instructions for Direct Fabrics Cubicle Curtain track. NHS approved Cubicle Curtain Track. See the full range - http://www.direct-fabrics.co.uk/cubicle-curtain-track-all-option-sizes.html
Tempo Light, Heavy, Dual Screen Manuals
This document provides installation instructions for single and dual monitor support arms. It describes how to mount the arm to a work surface using either a grommet hole or clamp, how to attach monitors to the arm, how to balance the arm counterweight, and how to route cables. Warnings are given to read all instructions before installation and to verify the surface can support the equipment weight.
iMovR Xtend Monitor Arm Manual
1. The document provides assembly instructions for the Xtend 7818J Series monitor arm. It includes a parts list and diagrams showing how to assemble, mount, adjust, and use the arm and its components.
2. The instructions describe how to mount the base assembly to a work surface using either a clamp or grommet mounting system, attach the arm assembly to the base, and mount a monitor to the arm using a VESA plate.
3. Additional sections cover adjusting the arm tension, joint torque, and tilt, as well as using the cable managers to route cables.
Trackless keyboardtray manual
1) The document provides instructions for installing a Trackless Keyboard Tray, including drilling pilot holes, attaching the keyboard platform and arm, and installing the mouse fence.
2) It describes assembling the keyboard tray parts, extending the arm into place and securing it with screws, and snapping on the mouse fence.
3) The final section explains how to use the installed keyboard tray, including tilting and positioning the keyboard and mouse platforms, adjusting the tray height and rotating it.
Cadence plus installation manual
Stand or sit at work with the Cadence Plus, a two-tiered desk converter that hovers over your desk surface and allows users to experience the health benefits of standing at work. Combining elegant design aesthetics, durability, adjustability and best-in-class stability in one affordable unit. The Cadence Plus offers ultra-flexibility for your workstation using a gas-assisted counter-balance arm with 180-degree rotation and 22" height range.
iMovR Lander L-Desk Instruction Manual (w or w/o built-in SteadyType Keyboard...
This installation manual provides instructions for assembling an adjustable height L-desk. It has 13 steps for assembling the desk legs, tabletop, return, and controller. It also provides information on setting height favorites and reminders on the controller to encourage standing. The intuitive controller allows for smooth height adjustments and storing preferred standing and sitting positions.
Concerto Monitor Arm Manual
This document provides assembly instructions for mounting multiple monitor displays on an adjustable arm system. It includes the following:
1. Instructions are given for assembling the base pole mount, extension arms, and dual monitor hubs to attach displays at the desired heights and locations.
2. Directions are provided for mounting the pole to surfaces using either a clamp or grommet system, as well as mounting to a wall or slat wall.
3. Steps are outlined for adjusting the tension on movable arm joints and height adjustable segments to properly counterbalance attached monitors.
Risk assesment of 4 storey building
This document summarizes the results of a safety inspection conducted on a 4-story building. It assessed compliance with guard rail systems, personal fall arrest systems, and safety net systems. Guard rails were 75% compliant for top and toe rails but 88% for mid rails. Personal fall arrest anchorage connectors and body belts were 63% compliant while connecting devices were only 38% compliant. Safety nets were 50% compliant. In total, safety compliance across all criteria was calculated at 64.28%. The document recommends inspecting fall protection before each use, recording unsafe behaviors, providing fall protection training to workers, and conducting investigations and program evaluations to improve safety.
model #2340 articulator /cosmetic dentistry courses
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
00919248678078
Upsilon Adjustable-Height Desk System Installation Manual
This installation manual provides instructions for assembling an adjustable height desk system. The summary is:
1. The manual guides the user through assembling the desk base including attaching legs, crossbars, support arms and extension channels.
2. Next, the user is instructed to attach the assembled base to the desk top using provided screws.
3. Finally, the user connects control cables and plugs in the power supply to complete assembly and initialize the desk for operation.
ThermoDesk ELITE Adjustable-Height Desk System - Installation and User Manual
This document provides installation and user instructions for the ThermoDesk ELITE adjustable height desk system. It includes a 10 step assembly process with diagrams to attach the legs, crossbars, support arms and install the table top. It also provides instructions for setting and adjusting the desk height using the digital controller, and maintaining and troubleshooting the desk system. The warranty covers defects in materials and workmanship for 20 years on the steel frame, 10 years on moving parts, and 5 years on the table tops.
Omega Everest Electric Adjustable-Height Desk Manual
This document provides installation instructions for assembling an Omega Everest 3D-adjustable sit-stand desk system. The instructions are presented over 14 steps and include attaching the feet and lifting legs, crossbars, top support arms, affixing the base to the table top, installing the power supply and cables, mounting the digital hand controller, assembling the optional keyboard platform, and attaching bumpers and cable guides. Diagrams accompany each step to illustrate proper assembly.
EVANNEX EcoHitch for Tesla Model S Install Guide
This document provides installation instructions for installing a tow hitch on a 2012-2016 Tesla Model S. It involves removing various underbody panels and the rear bumper fascia. The hitch plate attaches to existing studs on the frame and additional brackets are installed to reinforce it. A template is provided to cut an access hole in the bumper for the tow ball. Proper safety precautions and labeling of removed hardware is recommended. The installation is designed for up to 200 lbs of tongue weight and 2000 lbs of towing capacity.
What's hot (20)
iMovR ZipView Unison Dual Monitor Arm with Handle - Instruction Manual
iMovR ZipView Unison Dual Monitor Arm with Handle - Instruction Manual
ZipView Unison Dual Monitor Arm with Handle User Manual
ZipView Unison Dual Monitor Arm with Handle User Manual
iMovR Cadence Standing Desk Converter Installation Manual
iMovR Cadence Standing Desk Converter Installation Manual
iMovR Lander L-Desk Instruction Manual (w or w/o built-in SteadyType Keyboard...
iMovR Lander L-Desk Instruction Manual (w or w/o built-in SteadyType Keyboard...
model #2340 articulator /cosmetic dentistry courses
model #2340 articulator /cosmetic dentistry courses
Upsilon Adjustable-Height Desk System Installation Manual
Upsilon Adjustable-Height Desk System Installation Manual
ThermoDesk ELITE Adjustable-Height Desk System - Installation and User Manual
ThermoDesk ELITE Adjustable-Height Desk System - Installation and User Manual
Omega Everest Electric Adjustable-Height Desk Manual
Omega Everest Electric Adjustable-Height Desk Manual
Similar to Spacer kit instructions
Toughbox-Assembly-Instructions
This document provides assembly instructions for an AndyMark Toughbox in 10 steps. It includes a parts list and diagrams showing how to assemble the various gears and plates using specific fasteners. It also describes how to attach an encoder package for measuring output, including tapping holes in the mount plate, assembling the encoder circuit board and base, and mounting it to the assembled toughbox.
Zipblock inst
El sistema de junta de expansión ZB 200/400 es un sello elastomérico de EPDM extruido de una pieza con orificios integrales, unidos en una cama de epoxi de alta resistencia, diseñado para su uso en aplicaciones de plataformas de estacionamiento. El sistema resultante se sella a cada lado con un sellador de uretano, lo que da como resultado un sistema de unión extremadamente duradero y hermético.
Gt lts disk brakes-
This document provides instructions for converting a bicycle from rim brakes to disk brakes using a universal disk brake mounting kit. It describes the supplies and tools needed and gives step-by-step instructions for mounting the disk brake caliper and bracket to the bike frame, including drilling holes for bolts. It also describes adding a forward-facing support arm to reinforce the front of the bracket against braking forces.
Pedal Board Presentation boards
The Gigging Musician pedal board package consists of an aluminum pedal board measuring 323 x 611mm that can fit up to 10 pedals, a protective wooden case, a removable storage tray, and a friction mounting system. The pedal board uses an aluminum rail system to allow different mounting options to securely attach pedals. It includes 8 friction mounts and 16 double friction mounts. The case features a folding built-in amplifier stand and handles for easy transport. A removable storage tray lined with foam allows for customization and storage of additional gear.
Manto large frame panel formwork
This document provides instructions for assembly and use of the MANTO large-frame panel formwork system. It includes an overview of the various components of the MANTO system, including panel dimensions and types, connection parts, brackets, and platforms. The document outlines important safety notes and contains detailed descriptions and specifications for 50+ individual MANTO formwork components.
21915_r1
The document provides instructions for installing flares on a Ford Ranger. It states that the flares must be installed according to the written instructions and using the provided hardware, and warns that failure to do so will invalidate the warranty. It then outlines the steps needed to install the front and rear flares, which include fitting the flares, installing edge trim, attaching mounting tabs and clips, and tightening all screws. Tools required and parts included are also listed.
Assembly_Manual_0.1 (2).pdf
The document provides assembly instructions for building the frame of a Voron 3D printer. It discusses preparing components like heat set inserts and rail carriages. It provides guidelines for installing rails on various extrusions to form the X, Y, and Z axes. Precise positioning and squaring of parts is emphasized to ensure proper assembly. Readers are advised to take care when working with small components and to refer to additional resources for clarification on steps.
Composite decking-installation-guide
This document provides installation instructions for installing a deck using hollow decking boards with a solid border. The 11 step process includes: measuring the area; preparing and leveling the ground; building the frame with joists spaced every 400mm or less; locating start up clips for the first board; securing all start up clips; tapping boards into place with fixing clips along the outside edge; continuing adding boards into fixing clips; allowing gaps between butted boards; using start up clips differently for the last board; pre-drilling and screwing down the solid border board; and completing the deck.
Pdf empaques
The document provides instructions for properly installing a gasket to ensure a reliable seal. It discusses selecting high quality gaskets and flanges that meet specified surface finish requirements. It also outlines important considerations for fasteners, lubrication, and a regimented bolting sequence of incrementally increasing torque in a crisscross pattern to evenly stress the bolts. Following these installation steps can help achieve a leak-free joint.
CoFold Non-Mortice Sliding Folding Door Gear Installation Instructions
CoFold is the ultimate in exterior folding systems and opens up a wealth of new design possibilities.
The CoFold System has been designed to maximise the flexibility of a room’s living space, removing barriers and enabling the user to have an indoor/outdoor experience by fully opening up exterior walls.
The system which operates with effortless ease combines the benefits of folding doors with the ability to keep out the weather with no corrosion worries. This modern, contemporary feature will increase available living space whilst allowing natural light to envelop the room.
System Capacity
Maximum leaf height - 3300mm
Maximum leaf weight - 100kg
Maximum leaf width - 1000mm
Leaf thickness - 35-68mm*
* For thicker or thinner doors please contact Coastal Technical Team
For doors between 35-47mm use an alternative flush bolt
Applications
Residential and commercial timber exterior folding applications
Specially suited to coastal environments made from 316 stainless steel.
End folding timber doors folding to one or both sides
Standard folding configuration features doors folding outward.
Inward folding doors can be used where the doors are not directly
exposed to the weather.
Premium security features
Recognised weather resistance
The folding unit is not hinged to post, but is pivoted in the track and floor. All door leaves are of equal width. A swing leaf can be included by incorporating an odd number of leaves. For full weather protection, doors, frame and track should incorporate the seals provided in the CoFold range.
Cill and frame construction should be in accordance with the CoFold fixing instructions. Intermediate hangers and hinges are non rebated.
www.coastal-group.com
EVANNEX EcoHitch for Tesla Model S Install Guide Final
This document provides installation instructions for installing a 2" or 1.25" EcoHitch on a 2012-2016 Tesla Model S. The installation involves removing underbody panels, bumper fascia, and other components to access attachment points for the hitch. Detailed steps and diagrams are provided to guide removal and installation of over 20 components. Safety is emphasized throughout and it is recommended to have the installation performed by a professional.
Allando talajorgony-permanent-freyssibar-anchor en
1) The permanent Freyssibar anchor system consists of a post-tensioning bar contained within a bore hole and connected to an external anchor head.
2) The anchor body is bonded to the ground by injecting cement grout through an injection system.
3) The main component is a post-tensioning bar called a Freyssibar that meets European strength standards, and the document provides technical specifications for the bars.
DrawBotAssemblyUserGuideV3.pdf
This document provides assembly and user instructions for a Drawing Robot. It includes a parts list, instructions for 3D printing parts, and step-by-step assembly directions for the robot frame, axes, motors, and software. Key steps include cutting linear rods to length, assembling the X and Y axes with bearings and belts, adding a pen holder to the Z axis, wiring stepper drivers and a servo, and installing GRBL firmware on the Arduino controller. The completed robot can be controlled to draw with Gcode commands sent from software.
6 points about ejector pins help your injection molding work increase 50%!
What is the function of the ejector pin?
Ejector pins help safely remove parts from molds after they have been made. Here are some tips on how to properly locate and use those pins. Ejector pins are the “bouncers” of the injection molding world. They let technicians apply a force to eject a part from the mold, and, in some cases, can leave marks.
Akshay Composter
This document provides instructions for building a hexagonal home composter with a 30 liter capacity. It consists of a hexagonal frame, punched mesh, central rod, baffles, lid, and stand. Materials and tools required are listed, along with detailed assembly steps and diagrams. The composter is designed to be manually operated and has openings for proper aeration. Ready-made kits are available from Vigyan Ashram in India.
A8-M Double sprinkler 3D Printer Installation Instructions-1.0.pdf
This document provides step-by-step assembly instructions for an A8-M 3D printer. It includes 30 steps to assemble the various components such as the frame, belts, motors, electronics, and includes warnings and attention notes for proper assembly. The assembly requires checking that all parts are included, placing screws and rods in their proper positions, connecting wiring and belts, and calibrating the print bed height.
CoFold Mortice Sliding Folding Door Gear Installation Instructions
CoFold is the ultimate in exterior folding systems and opens up a wealth of new design possibilities.
The CoFold System has been designed to maximise the flexibility of a room’s living space, removing barriers and enabling the user to have an indoor/outdoor experience by fully opening up exterior walls.
The system which operates with effortless ease combines the benefits of folding doors with the ability to keep out the weather with no corrosion worries. This modern, contemporary feature will increase available living space whilst allowing natural light to envelop the room.
System Capacity
Maximum leaf height - 3300mm
Maximum leaf weight - 100kg
Maximum leaf width - 1000mm
Leaf thickness - 35-68mm*
* For thicker or thinner doors please contact Coastal Technical Team
For doors between 35-47mm use an alternative flush bolt
Applications
Residential and commercial timber exterior folding applications
Specially suited to coastal environments made from 316 stainless steel.
End folding timber doors folding to one or both sides
Standard folding configuration features doors folding outward.
Inward folding doors can be used where the doors are not directly
exposed to the weather.
Premium security features
Recognised weather resistance
The folding unit is not hinged to post, but is pivoted in the track and floor. All door leaves are of equal width. A swing leaf can be included by incorporating an odd number of leaves. For full weather protection, doors, frame and track should incorporate the seals provided in the CoFold range.
Cill and frame construction should be in accordance with the CoFold fixing instructions. Intermediate hangers and hinges are non rebated.
www.coastal-group.com
TRAY INSTRUCTABLE
You can start building your own MOST using a set of commercially available materials. Take a look at an instructable of how to start off building the TRAY.
Longboard Installation Instructions
The document provides installation instructions for Longboard siding and soffit. It recommends using precision and having an experienced professional install Longboard due to its precise nature. It describes required tools like compound miter saws and blades for cutting non-ferrous metals. Longboard must be fastened with self-drilling screws to allow for removal if needed. Instructions are provided for parallel and perpendicular soffit and siding installation, including starter strips, venting strips, and expansion joints. Care must be taken during cutting and installation to avoid damage and ensure proper expansion/contraction gaps are left.
Example_Prorack HD iLoad Track Kit Instructions
The document provides installation instructions for a Prorack heavy duty track and crossbar system for a Hyundai iLoad vehicle. It outlines 10 steps for installing the tracks to the roof, including positioning the tracks, drilling holes, applying protective sealants, inserting rivets, and refitting trim pieces. It then details 6 steps for assembling the crossbars, including using height packers if needed, adjusting the legs, inserting endcaps, and securing the crossbars to the tracks. It emphasizes the importance of securely attaching all racks and accessories and checking their attachment periodically.
Similar to Spacer kit instructions (20)
CoFold Non-Mortice Sliding Folding Door Gear Installation Instructions
CoFold Non-Mortice Sliding Folding Door Gear Installation Instructions
EVANNEX EcoHitch for Tesla Model S Install Guide Final
EVANNEX EcoHitch for Tesla Model S Install Guide Final
Allando talajorgony-permanent-freyssibar-anchor en
Allando talajorgony-permanent-freyssibar-anchor en
6 points about ejector pins help your injection molding work increase 50%!
6 points about ejector pins help your injection molding work increase 50%!
A8-M Double sprinkler 3D Printer Installation Instructions-1.0.pdf
A8-M Double sprinkler 3D Printer Installation Instructions-1.0.pdf
CoFold Mortice Sliding Folding Door Gear Installation Instructions
CoFold Mortice Sliding Folding Door Gear Installation Instructions
More from iMovR
Lander Desk DIY Assembly Manual
1) The document provides step-by-step assembly instructions for installing a Lander Standing Desk Base, including attaching the crossbar mounts, sliding on the support arms, securing the assembly to the desktop, installing the legs and motor housing, and connecting cables.
2) Additional steps include screwing down the control box, installing the hand controller, initializing the desk height, and downloading the mobile app for programming options.
3) Customer support contact information is provided at the end for any additional questions.
Lander L- & U-Desk Assembly Instructions and User Manual
This 3-sentence summary provides the essential information about the document:
The document is an installation manual that provides step-by-step instructions for assembling an iMovR Lander adjustable height desk. It outlines 17 steps for assembling the desk parts like the tabletop, base, legs, return, and crossbar. It also provides instructions for attaching the controller, managing cables, and programming favorite height settings on the controller.
The Ensign's Standing Desk Installation and User Manual
The document provides assembly instructions for an adjustable height standing desk. It consists of 11 steps to assemble the two legs, attach the table top, and set up the hand controller. It then provides information on programming the controller to save height presets, set reminders to stand, and troubleshoot any issues.
Lander Standing Desk User Manual
This document provides installation and assembly instructions for an adjustable height desk system. It consists of 3 sentences:
The instructions guide the user to assemble the desk by placing the tabletop upside down and attaching the legs, controller, and other parts without tools. Additional steps show how to program the controller to set favorite heights, reminders to stand, and other settings. Instructions are also provided for installing an optional keyboard tray accessory.
Lander Lite DIY Assembly Instructions Rev
This document provides assembly instructions for a Lander Lite standing desk base in 20 steps. It instructs the user to slide the top support arms onto the base frame, attach the crossbar if applicable, screw the frame into the desktop using the provided screws, mount and secure the legs by connecting cables and clamps, attach the feet, install the hand controller and foot pads, and initialize the desk by lowering it to its lowest point and holding the paddle for 5 seconds. It also provides information on programming the desk from the handset or smartphone app.
Lander DIY Assembly Guide
The document provides step-by-step assembly instructions for a Lander Standing Desk Base. It outlines 21 steps to assemble the desk base frame, attach the legs and motor system, secure the desktop, and initialize the desk controls. The instructions guide the user to slide frame pieces together, mount the legs and control box, plug in cables, and calibrate the desk height using the hand controller or mobile app. Additional resources are provided for support.
Lander Lite Standing Desk User Manual
This installation manual provides instructions for assembling an adjustable height desk system. The summary is as follows:
1) The desk arrives nearly fully assembled and can be set up in minutes by connecting cables and legs to the tabletop base and securing them with clamps and locks.
2) Detailed step-by-step instructions are provided to attach the two desk legs, flip the tabletop, plug in the power supply, and initialize the hand controller.
3) The hand controller allows the desk height to be adjusted and two favorite heights can be programmed. Standing reminders and other settings are customizable through the controller or mobile app.
4) Additional information is included on leveling the desk, recommended
Standing mat-study-texas-am-university-2013
The study evaluated 4 anti-fatigue mats (Mats A-D) and a no-mat control for their effects on worker height loss and flexibility changes over an 8-hour workday. Eighteen subjects were recruited from two industrial sites and used each mat/control for 5 days. Height and flexibility measurements were taken before and after each workday. Statistical analysis found that only Mat A (Let's Gel) produced significantly less height loss and greater flexibility increases compared to the no-mat control. The other mats were not significantly different than the control for either measurement. Mat A appears to be the most effective mat at reducing spinal compression and maintaining flexibility over an 8-hour workday.
INSTALLATION INSTRUCTIONS RONDO MICRO PASS-THROUGH GROMMET WITH COVER (NO POWER)
This document provides installation instructions for a Rondo Micro pass-through grommet with cover that has no power. It is 1-3/4 inches in diameter and has a grommet hole for running data cables, though the cables are not included. Contact information is provided to call or email for customer care support located in Bellevue, Washington.
Installation Instructions for Rondo Micro USB-C 18W and 60W
This document provides installation instructions for two chargers from iMovR, the Rondo Micro USB-C 18W and USB-C 60W chargers. It includes contact information for iMovR, including their phone number, email for customer care, physical address in Bellevue, WA, and a copyright and date.
Captains Desk Instruction Manual
The document provides installation instructions for assembling and setting up the Captain's Desk standing desk. It consists of 14 steps to assemble the desk by connecting the legs, table top, locks, clamps and cables. It then provides instructions for programming the hand controller to set height favorites and reminders to stand. Finally, it offers tips on leveling the desk and includes a troubleshooting section and information on accessories.
Rondo Micro USB-C 18W Instruction Manual
This document provides installation instructions for the RondomicroUSB-C 18W charger. It includes specifications for a 1-3/4" diameter grommet hole and contact information for customer support including a phone number, email address, and physical address for iMovR located in Bellevue, WA.
Rondo Micro AC Outlet Instruction Manual
This document provides installation instructions for the Rondo Micro AC socket in 3 steps. The socket requires a 1-3/4 inch diameter grommet hole and additional support can be contacted by calling (888) 208-6770 or emailing customercare@iMovR.com. The socket is produced by iMovR located at 14260 NE 21st Street, Bellevue, WA 98007.
Captain's Desk Standing Desk Instruction Manual
The document provides installation instructions for assembling and setting up the Captain's Desk standing desk. It outlines 14 steps to assemble the desk by connecting the legs, table top, locks, clamps and cables. It then provides instructions for programming the hand controller to set height favorites and reminders to stand. Finally, it includes information on leveling the desk, troubleshooting, and cleaning.
Stowaway Ergonomic Keyboard Tray Installation Manual
This 3 sentence summary provides the essential information from the document:
The document is an installation guide for an ergonomic keyboard tray. It provides step-by-step instructions for mounting the baseframe to a desk and assembling the keyboard and mouse platforms. Contact information is included if the user has any other questions during the installation process.
Neemo Ergonomic Chair User Guide
This document provides instructions for adjusting various parts of an office chair called NEEMO. It describes how to raise or lower the seat height using a lever, adjust the height and pivot of the optional headrest, change the height of adjustable arms, and set the tension and lock the recline position using a tilt lock lever and tension knob. Contact information is provided for support.
iMovR's McHale Advanced Ergonomic Chair User Guide
The document provides instructions for adjusting various parts of an office chair. It describes how to adjust the height and position of the armrests for forearm support. It mentions the chair can be equipped with either standard carpet casters or optional dual surface casters. The instructions explain how to raise or lower the seatback height by ratcheting the chair back to different notch positions or sliding it to the lowest setting. It also provides directions for adjusting the degree of lumbar curve in the mesh back and locking the recline of the seatback in the desired position.
SteadyType Exo Ergodynamic Keyboard Tray User Instructions
The document provides instructions for installing and optimizing the SteadyType Exo keyboard tray. It explains how to attach the tray to a desk, adjust its angle for ergonomic typing, position the rubber bumpers and keyboard, and place pins to create a resting spot for a mouse. The goal is to set up the tray for comfortable use in various keyboard configurations including right-handed, left-handed and split keyboard styles.
iMovR TopView Max Unison Monitor Arm
The TopView-MAX-UNISON is a heavy duty dual monitor arm that can hold two monitors weighing up to 38.5 pounds combined. It has a finger touch height adjustment between 9-22.8 inches and allows the monitors to extend out 30.5 inches. The arm allows for ±55 degrees of tilt and ±90 degrees of rotation at the monitor mounts as well as 360 degrees of rotation at two points along the arm. It comes with both a desk clamp and grommet mount and has a 15 year warranty.
More from iMovR (20)
Lander L- & U-Desk Assembly Instructions and User Manual
Lander L- & U-Desk Assembly Instructions and User Manual
The Ensign's Standing Desk Installation and User Manual
The Ensign's Standing Desk Installation and User Manual
INSTALLATION INSTRUCTIONS RONDO MICRO PASS-THROUGH GROMMET WITH COVER (NO POWER)
INSTALLATION INSTRUCTIONS RONDO MICRO PASS-THROUGH GROMMET WITH COVER (NO POWER)
Installation Instructions for Rondo Micro USB-C 18W and 60W
Installation Instructions for Rondo Micro USB-C 18W and 60W
Stowaway Ergonomic Keyboard Tray Installation Manual
Stowaway Ergonomic Keyboard Tray Installation Manual
iMovR's McHale Advanced Ergonomic Chair User Guide
iMovR's McHale Advanced Ergonomic Chair User Guide
SteadyType Exo Ergodynamic Keyboard Tray User Instructions
SteadyType Exo Ergodynamic Keyboard Tray User Instructions
Recently uploaded
原版复制澳洲莫纳什大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【澳洲莫纳什大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
A Guide to Planting and Caring for Your Land
The Green Corner sharesa guide to planting and caring for your land. For more details, visit: Tthegreencorner.com.sg.
Social Media is Eating Retail- The $Trillion Trend You Can't Ignore.pdf
Social media isn't just for cat videos anymore. It's a SHOPPING MALL generating a WHOPPING $1 TRILLION!
Introducing Bliss Point by Tinuiti Webinar
It’s no secret that the marketing landscape is growing increasingly complex, with numerous channels, privacy regulations, signal loss, and more. One of the biggest problems facing marketers today is that they’re experiencing data deluge and data drought simultaneously.
Bliss Point by Tinuti addresses these challenges by providing a single, user-friendly platform for measuring what marketers previously struggled to measure. With Bliss Point, you can move beyond simply validating past actions and instead use measurement to guide real-time decision-making on what should happen next.
Join our product experts for a live demonstration of Bliss Point. Discover how it can empower your brand with the tools and insights needed to optimize each channel, across your entire media mix, and your overall brand performance.
怎么购买澳洲南十字星大学毕业证文凭毕业证原版一模一样
原版一模一样【微信：741003700 】【澳洲南十字星大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
The Future of E-commerce: first-hands insights.
According to Statista, revenue in the e-commerce market is projected to reach US$4,117.00bn in 2024. New technologies and methodologies constantly influence how the e-commerce market develops and shapes itsthe future of e-commerce. The main questions are in the air: How can we stay aligned with e-commerce business owners and ensure our engineering services meet their evolving needs?
At Solvd, this question prompted a deep dive into the current e-commerce landscape. Our goal was to get information about the future of e-commerce directly from first-hand sources. In the course of our research, we explored:
- Portrait of respondents.
- Current challenges and pain points of the e-commerce industry.
- Emerging trends and upcoming opportunities.
- Human resource allocation for e-commerce projects.
- Solutions and actionable advice for business owners.
- The role of a reliable partner in problem-solving.
Explore, download, and share invaluable insights made by Solvd!
快速办理(BC毕业证书)波士顿学院毕业证PDF成绩单一模一样
学校原件一模一样【微信：741003700 】《(BC毕业证书)波士顿学院毕业证PDF成绩单》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (9)
Social Media is Eating Retail- The $Trillion Trend You Can't Ignore.pdf
Social Media is Eating Retail- The $Trillion Trend You Can't Ignore.pdf
Spacer kit instructions
- 1. INSTALLATION KEYBOARD TRACK SPACER KIT Model SPACERKIT-KBD-V2 SPACERKIT-KBD-V2 Rev B 1/17 Front Track Bracket (1) 6mm Spacer (6) M5x25mm(6) M5x30mm (2) M5x40mm (6) M5x50mm (6) M6x16mm (6) 10mm Spacer (6) 20mm Spacer (8) M5 Serrated Flange Nut (8) Rear Track Bracket (2) 800.833.3746 esiergo.com © 2017 ESI Ergonomic Solutions. All rights reserved. SPACERKIT-KBD-V2 Rev B 1/17
- 2. KEYBOARD TRACK SPACER KIT KEYBOARD TRACK SPACER KIT PLEASE REVIEW these instructions before beginning the installation. Check that all the parts shown on the cover were provided with your order. Contact your supplier if any materials are missing. Do not discard the packaging until satisfied that the product operates to your satisfaction. Step 1 Determine which spacers and machine screws to assemble. • Measure the height of the cross channel or other obstruction that needs to be cleared. • Choose the spacer/screw combination for the proper amount of clearance. Step 2 Assemble the spacers and brackets to the keyboard track. See the illustration at the top of the next page. • In this example, an additional clearance of 2 (53mm) is added. • Install 20mm spacers at the rear on the track for bumper spacer mounts. Use an M5x30mm screw. Do not install the front bumper until after loading the tray onto the track. • Secure all screws with the M5 serrated flange nuts. Step 3 Attach the track/spacer assembly to the underside of the work surface using the six M6x16mm wood screws. See the illustration at the bottom of the next page. • Attach the wood screws through the mounting holes in the brackets. CAUTION: Always check that screws used to attach components to the work surface are not too long for the thickness of the surface. 6mm Spacer M5x25mm Work Surface 10mm Spacer 1.3 (35mm) 2 (53mm) 2.3 (60mm) 20mm Spacer M5x40mm M5x50mm Cross Channel or Other Obstruction Measure Work Surface Step 2 Illustration Step 3 Illustration Screw into Bottom of Work Surface Install Bumper After Loading Tray Total of Six M6x16mm Screws Required Track Not Included Front Bumper Spacer Mount (Install After Loading Tray) Rear Bumper Spacer Mount Total of 8 Serrated Flange Nuts Required 30mm 20mm Front Rear