A very good news for the farmers of the India interested in installing solar powered water pumping system to irrigate their farms.
At Claro, we believe that an improvement in water productivity can be done through revitalizing irrigation technology through solar powered water pumps.
Design and fabrication of solar powered smart irrigation systemNexgen Technology
TO GET THIS PROJECT COMPLETE SOURCE ON SUPPORT WITH EXECUTION PLEASE CALL BELOW CONTACT DETAILS
MOBILE: 9791938249, 0413-2211159, WEB: WWW.NEXGENPROJECT.COM ,EMAIL:Praveen@nexgenproject.com
NEXGEN TECHNOLOGY provides total software solutions to its customers. Apsys works closely with the customers to identify their business processes for computerization and help them implement state-of-the-art solutions. By identifying and enhancing their processes through information technology solutions. NEXGEN TECHNOLOGY help it customers optimally use their resources.
a single stage photovoltaic system for a dual-inverter-fed open-end winding i...Yashwanth kumar
This document presents a single-stage photovoltaic system for driving an open-end winding induction motor for pumping applications. The key aspects are:
1) The system uses a dual-inverter to achieve three-level inversion with a low dc bus voltage, reducing the voltage rating requirements.
2) An integrated control strategy achieves maximum power point tracking from the PV panels and V/f motor speed control.
3) Analytical modeling, simulations, and experimental results are presented to validate the performance of the system under different environmental conditions.
World Bank - Mainstreaming Solar Powered Water PumpingKeith Cobby
A detailed and thorough insight into the world of solar water pumping. Now is the time to harness the energy of the sun for water pumping and distribution.
These panels are designed with solar cells composed of semiconductor materials.
The main function of Solar panels is to convert solar energy into DC electrical energy generally of 12V, which is further used for the rest of the circuit. The number of cells required and their size depends on the rating of the load.
The collection of solar cells can produce maximum electricity. But, the solar panel must place exactly at right angles to the sun rays.
Groundwater Engineering is an international company that specializes in water well engineering, dewatering, and groundwater control. They have evolved to supply and install solar pumping systems for residential or irrigation needs. Solar water pumping systems can provide a reliable and sustainable solution for irrigation, fish pond aeration, poultry heating, livestock watering, or buildings with insufficient water supply if they are located beyond grid access. The technology uses solar panels to pump groundwater or surface water to a reservoir, providing water when there is no sunshine. Security and proper matching of components are important considerations for efficient and reliable long-term system function. Applications include remote villages, schools, hospitals, irrigation, and livestock farming.
This document summarizes solar photovoltaic water pumping systems. It describes the key components of solar PV pumping systems including the solar panels, motor, pump, and storage. The main applications are listed as village water supply, livestock watering, and irrigation. Pros and cons are provided for different pump types including submersible pumps, surface pumps, and floating pumps. Guidelines are given for properly sizing a solar pumping system to match the water demand and availability. The performance and efficiency of solar pumping technology is discussed.
This was part our ENGR493 Presentation where we had to do some research for concept and design generation and then possess the knowledge to create a solar powered submersible water pump using a parabolic solar collector, a gamma stirling engine and a pump for irrigation use in Senegal.
Solar water pump (swp) in india "Research thesis presentation"kevIN kovaDIA
This document provides a summary and analysis of the market potential for solar water pumping systems in India and conducts a cost-benefit analysis comparing diesel and solar water pumps. It finds that the break-even point for solar pumps compared to diesel pumps ranges from 2 to 10 years depending on the usage scenario. Subsidies can further improve the economics by lowering the break-even point. The document concludes that high fuel costs and difficulties obtaining electricity connections are driving farmers to adopt solar water pumps in India.
Design and fabrication of solar powered smart irrigation systemNexgen Technology
TO GET THIS PROJECT COMPLETE SOURCE ON SUPPORT WITH EXECUTION PLEASE CALL BELOW CONTACT DETAILS
MOBILE: 9791938249, 0413-2211159, WEB: WWW.NEXGENPROJECT.COM ,EMAIL:Praveen@nexgenproject.com
NEXGEN TECHNOLOGY provides total software solutions to its customers. Apsys works closely with the customers to identify their business processes for computerization and help them implement state-of-the-art solutions. By identifying and enhancing their processes through information technology solutions. NEXGEN TECHNOLOGY help it customers optimally use their resources.
a single stage photovoltaic system for a dual-inverter-fed open-end winding i...Yashwanth kumar
This document presents a single-stage photovoltaic system for driving an open-end winding induction motor for pumping applications. The key aspects are:
1) The system uses a dual-inverter to achieve three-level inversion with a low dc bus voltage, reducing the voltage rating requirements.
2) An integrated control strategy achieves maximum power point tracking from the PV panels and V/f motor speed control.
3) Analytical modeling, simulations, and experimental results are presented to validate the performance of the system under different environmental conditions.
World Bank - Mainstreaming Solar Powered Water PumpingKeith Cobby
A detailed and thorough insight into the world of solar water pumping. Now is the time to harness the energy of the sun for water pumping and distribution.
These panels are designed with solar cells composed of semiconductor materials.
The main function of Solar panels is to convert solar energy into DC electrical energy generally of 12V, which is further used for the rest of the circuit. The number of cells required and their size depends on the rating of the load.
The collection of solar cells can produce maximum electricity. But, the solar panel must place exactly at right angles to the sun rays.
Groundwater Engineering is an international company that specializes in water well engineering, dewatering, and groundwater control. They have evolved to supply and install solar pumping systems for residential or irrigation needs. Solar water pumping systems can provide a reliable and sustainable solution for irrigation, fish pond aeration, poultry heating, livestock watering, or buildings with insufficient water supply if they are located beyond grid access. The technology uses solar panels to pump groundwater or surface water to a reservoir, providing water when there is no sunshine. Security and proper matching of components are important considerations for efficient and reliable long-term system function. Applications include remote villages, schools, hospitals, irrigation, and livestock farming.
This document summarizes solar photovoltaic water pumping systems. It describes the key components of solar PV pumping systems including the solar panels, motor, pump, and storage. The main applications are listed as village water supply, livestock watering, and irrigation. Pros and cons are provided for different pump types including submersible pumps, surface pumps, and floating pumps. Guidelines are given for properly sizing a solar pumping system to match the water demand and availability. The performance and efficiency of solar pumping technology is discussed.
This was part our ENGR493 Presentation where we had to do some research for concept and design generation and then possess the knowledge to create a solar powered submersible water pump using a parabolic solar collector, a gamma stirling engine and a pump for irrigation use in Senegal.
Solar water pump (swp) in india "Research thesis presentation"kevIN kovaDIA
This document provides a summary and analysis of the market potential for solar water pumping systems in India and conducts a cost-benefit analysis comparing diesel and solar water pumps. It finds that the break-even point for solar pumps compared to diesel pumps ranges from 2 to 10 years depending on the usage scenario. Subsidies can further improve the economics by lowering the break-even point. The document concludes that high fuel costs and difficulties obtaining electricity connections are driving farmers to adopt solar water pumps in India.
Total market size for Agricultural water pumps is 50 – 60 times larger than the National Solar Mission. Farmers are plagued by lack of Electricity and high Diesel prices. Government is promoting Solar but current Solar PV pumps cost almost 4 Lakh for 2 HP pumps making them too expensive. We are developing a Steam fired pulsometer that can work with Solar as well as burning wood at night. Simple well proven design reduces costs, making the cost comparable to conventional pumps even without subsidies. Please get in touch to learn more about this tremendous opportunity !
Naps Solar Systems: Solar powered water pumping system in YemenNapsSolar
A solar powered water pumping system was implemented in a remote mountain area in Yemen to provide clean water for domestic and health care use. The system included 24 solar panels producing a total of 1200W of power, an 1500W inverter, and a submersible pump. It was able to pump 8000-9000 liters of water per day at a lower cost than using diesel. The implementation was smooth and the system met the community's needs, with further sites being planned. Solar electric pumping was shown to be economically viable for villages up to 2000 people.
The document describes the design and testing of a solar-powered irrigation system for farms in rural areas with unreliable electricity access. A scale prototype was developed using a solar panel to power a water pump, with a water storage reservoir and drip irrigation system. Sensors monitor soil moisture to control the pump. The system was tested and found to efficiently deliver water to crops in an arid region. Key components include the solar panel, battery, pump, sensors and microcontroller to automate operation based on soil conditions.
The Smart Solar Plant is a conventional solar thermal cycle, backed by long-term thermal storage and
electronic power conversion systems, integrating PV generation and electrochemical
storage.
This document outlines a proposed design for a new 20MW geothermal power plant in Savusavu, Fiji. The plant would use a binary cycle system to harness geothermal energy from reservoirs between 70-200 degrees Celsius. The system would include production wells to extract brine, a heat exchanger to transfer heat to a working fluid, turbines turned by the heated fluid, and 80 generators each producing 250kW of power. Electricity would be transmitted through cables to consumers. The plant aims to provide clean, renewable energy to the area at a lower cost than fossil fuels.
Solar water pump (swp) in India "let's make it in India"kevIN kovaDIA
Life is very is easy, sometimes we do complex rocket science and at last we realize it is just a common sense which can work, just a common sense...
#SolarPower #SolarEnergy #RenewableEnergy #Energy #SolarPanels #GreenEnergy #GoSolar #PV #Renewables #Electricity #CleanEnergy #OffGrid #EnergyEfficiency #Wind #WindPower #Renewable #Green #FossilFuels #Power #Flashmob #MakeInIndia
Lecture 1 micro hydro basics and status in nepalshahabuddin khan
Micro-hydro basics and status in Nepal (2 hours)
This document discusses micro-hydro power, including its advantages over other renewable energy sources like wind and solar. It explains typical system components like weirs, penstocks, and turbines. It also covers micro-hydro design approaches and factors considered like capacity and demand surveys. Finally, it provides an overview of micro-hydro development in Nepal, noting that as of 2008/2009 there were over 1,900 micro-hydro plants installed with a total capacity of 13.9 MW. Key organizations involved in supporting micro-hydro in Nepal are also identified.
This document presents a project report on a mobile charging system using hybrid solar energy. It was submitted by three students to partially fulfill the requirements for a Bachelor of Technology degree in Electrical and Electronics Engineering.
The system uses both solar panels and wind turbines to generate electricity. The solar panels convert sunlight to DC current, while the wind turbines use wind power to rotate a generator and produce DC current. Both sources charge a circuit board simultaneously that is used to charge connected mobile phones. A digital clock and temperature display are also included.
The report includes an abstract, table of contents, introduction on renewable energy and hybrid power systems, literature review on solar, wind and hybrid systems, methodology and implementation details, results from testing, and
This document describes a proposed solar smart irrigation system for Indian farmers. The system uses solar power to run water pumps, and automatically controls water flow to fields using moisture sensors. This conserves both electricity by reducing grid usage, and water by preventing overwatering. It introduces the system components, reviews energy usage in Indian agriculture currently, and describes the research conducted to improve solar panel efficiency. Test results showed lower operating costs and maintenance compared to normal systems.
This document discusses the design and aims of a project to develop a cost-effective solar-powered water pump (SDP) for use by small-scale farmers in developing countries. The SDP is intended to provide irrigation with low operating costs as an alternative to expensive diesel pumps. The project aims to (i) fabricate a demonstration model, (ii) study the effects of solar concentration on water production, and (iii) recommend using mirrors to enhance system performance. The scope is limited to developing a model for small-scale irrigation to demonstrate feasibility and application of solar energy for pumping needs.
M Haroon REMENA -B20- PV-Diesel hybrid systemsMuhammad Haroon
Solar hybrid systems are power systems that combine solar
power from a photovoltaic system with another energy
source. One of the most common hybrid systems being PV diesel hybrid system, coupling PV and diesel generators, also
known as diesel gensets.
Introduction to Off Grid Solar Power systemShoeb Ali Khan
This document provides an overview of off-grid solar power systems, including their applications and key components. Off-grid solar systems are not connected to the main electricity grid and instead use solar panels, batteries, and other components to provide power independently. They can be used for homes, clinics, schools, businesses, water pumping, street lighting, and more. The main components of an off-grid solar system are PV solar panels, a solar charge controller, battery bank for storage, an inverter to convert DC to AC power, and electrical safety devices. Together these components collect solar energy, store it in batteries, and allow the power to be used as needed.
Restrainment of renewable energy systems and smart grids pptBIPUL KUMAR GUPTA
The document discusses renewable energy systems and smart grids. It provides background on increasing usage of renewable energy after oil crises and challenges around energy harvesting. It then summarizes India's electricity needs, deficits, and production. Specific renewable energy systems discussed include wind turbines, which convert linear wind motion to rotational energy, and solar energy systems like photovoltaic cells. Smart grids are defined as modernized electrical grids that use information technology to improve efficiency and sustainability of electricity production and distribution. Applications of renewable energy systems and advantages of smart grids are also summarized.
The Bakun Hydropower Project in Sarawak, Malaysia is the most efficient power station in the world. IMPSA was contracted to supply electromechanical equipment, including four 350 MW Francis turbine generating units, main power transformers, control and protection systems, and other ancillary equipment. The project involves constructing a 205m high concrete dam and powerhouse with eight generating units totaling 2,800 MW of installed capacity. The high efficiency of 94% is achieved through IMPSA's efficient Francis turbine design and integrated automation and control systems.
This document discusses an autonomous solar powered irrigation system. It aims to supply water for fields through a solar powered water pump and automate the system for better resource management. Farmers can water fields remotely using GSM technology, which provides status messages. The system optimizes power usage through water management and saves subsidized electricity. It provides an efficient and cost-effective way to automate irrigation in agriculture.
White Paper - Reducing Diesel Consumption with AHI BatteriesSteve Wilmot
1) The document discusses how adding energy storage like Aquion's Aqueous Hybrid Ion (AHI) batteries to microgrid systems with diesel generators and solar panels can significantly reduce diesel consumption and costs.
2) It provides an example of a resort in Southeast Asia that is analyzing adding solar and AHI battery storage to their existing diesel generator system. Modeling shows that medium and small storage systems can reduce the levelized cost of electricity compared to using just diesel or adding solar alone.
3) The results indicate that AHI battery storage is beneficial for reducing costs and diesel use across different system sizes and diesel price points for the resort, through increasing the efficiency of the diesel generators and allowing more solar energy to
This document discusses hybrid power systems which combine two or more sources of electricity generation, usually renewable sources like solar and wind, to provide reliable power. The objectives of hybrid systems are reducing use of non-renewable sources, improving reliability, minimizing costs, and better utilizing renewables. Examples discussed include solar-wind, wind-diesel, and microgrids which integrate distributed generation and storage. Hybrid systems provide continuous power and reduce fuel needs but require more complex control systems.
IRJET- Residential Hydro Power GenerationIRJET Journal
This document describes a proposed residential hydro power generation system to provide electricity for rural homes. It involves using the water pressure and flow from an elevated storage tank through household pipes to rotate a small-scale hydro turbine and generator. The system would include a turbine, generator, batteries for energy storage, and distribution of power to power lights, appliances, and other loads. The document provides details on estimating the available power based on head and flow rate, turbine design, generator and battery selection, and the overall working mechanism of using household water flow to generate useful electricity for homes.
Kuching | Jan-15 | Hydro Power Technology Development in Indonesia Lessons le...Smart Villages
The second in our series of workshops designed to gather input from stakeholders involved in existing off-grid projects in Africa, Asia and Latin America. This event is workshop scheduled to be held in Malaysia for the ASEAN countries will be organised by the Academy of Sciences Malaysia (ASM) in collaboration with Universiti Malaysia Sarawak (UNIMAS).
Solar irrigation system is the green way of energy production,so it is a good option for farmers for irrigation. After the initial cost it will become free of charge to farmers and farmers can install it anywhere.
This document describes a solar smart irrigation system that was prepared by students at HK HR JSPD. The system uses solar power to run water pumps that pump water from a bore well to a tank. A controller and moisture sensor are used to automatically regulate the outlet valve and control the flow of water from the tank to the irrigation field. This optimizes water use and conserves electricity by reducing use of grid power. It also conserves water by reducing losses. The document provides details on the components, cost analysis, advantages over traditional systems, and limitations. Product surveys of solar panels from Shell and GE are also included.
Total market size for Agricultural water pumps is 50 – 60 times larger than the National Solar Mission. Farmers are plagued by lack of Electricity and high Diesel prices. Government is promoting Solar but current Solar PV pumps cost almost 4 Lakh for 2 HP pumps making them too expensive. We are developing a Steam fired pulsometer that can work with Solar as well as burning wood at night. Simple well proven design reduces costs, making the cost comparable to conventional pumps even without subsidies. Please get in touch to learn more about this tremendous opportunity !
Naps Solar Systems: Solar powered water pumping system in YemenNapsSolar
A solar powered water pumping system was implemented in a remote mountain area in Yemen to provide clean water for domestic and health care use. The system included 24 solar panels producing a total of 1200W of power, an 1500W inverter, and a submersible pump. It was able to pump 8000-9000 liters of water per day at a lower cost than using diesel. The implementation was smooth and the system met the community's needs, with further sites being planned. Solar electric pumping was shown to be economically viable for villages up to 2000 people.
The document describes the design and testing of a solar-powered irrigation system for farms in rural areas with unreliable electricity access. A scale prototype was developed using a solar panel to power a water pump, with a water storage reservoir and drip irrigation system. Sensors monitor soil moisture to control the pump. The system was tested and found to efficiently deliver water to crops in an arid region. Key components include the solar panel, battery, pump, sensors and microcontroller to automate operation based on soil conditions.
The Smart Solar Plant is a conventional solar thermal cycle, backed by long-term thermal storage and
electronic power conversion systems, integrating PV generation and electrochemical
storage.
This document outlines a proposed design for a new 20MW geothermal power plant in Savusavu, Fiji. The plant would use a binary cycle system to harness geothermal energy from reservoirs between 70-200 degrees Celsius. The system would include production wells to extract brine, a heat exchanger to transfer heat to a working fluid, turbines turned by the heated fluid, and 80 generators each producing 250kW of power. Electricity would be transmitted through cables to consumers. The plant aims to provide clean, renewable energy to the area at a lower cost than fossil fuels.
Solar water pump (swp) in India "let's make it in India"kevIN kovaDIA
Life is very is easy, sometimes we do complex rocket science and at last we realize it is just a common sense which can work, just a common sense...
#SolarPower #SolarEnergy #RenewableEnergy #Energy #SolarPanels #GreenEnergy #GoSolar #PV #Renewables #Electricity #CleanEnergy #OffGrid #EnergyEfficiency #Wind #WindPower #Renewable #Green #FossilFuels #Power #Flashmob #MakeInIndia
Lecture 1 micro hydro basics and status in nepalshahabuddin khan
Micro-hydro basics and status in Nepal (2 hours)
This document discusses micro-hydro power, including its advantages over other renewable energy sources like wind and solar. It explains typical system components like weirs, penstocks, and turbines. It also covers micro-hydro design approaches and factors considered like capacity and demand surveys. Finally, it provides an overview of micro-hydro development in Nepal, noting that as of 2008/2009 there were over 1,900 micro-hydro plants installed with a total capacity of 13.9 MW. Key organizations involved in supporting micro-hydro in Nepal are also identified.
This document presents a project report on a mobile charging system using hybrid solar energy. It was submitted by three students to partially fulfill the requirements for a Bachelor of Technology degree in Electrical and Electronics Engineering.
The system uses both solar panels and wind turbines to generate electricity. The solar panels convert sunlight to DC current, while the wind turbines use wind power to rotate a generator and produce DC current. Both sources charge a circuit board simultaneously that is used to charge connected mobile phones. A digital clock and temperature display are also included.
The report includes an abstract, table of contents, introduction on renewable energy and hybrid power systems, literature review on solar, wind and hybrid systems, methodology and implementation details, results from testing, and
This document describes a proposed solar smart irrigation system for Indian farmers. The system uses solar power to run water pumps, and automatically controls water flow to fields using moisture sensors. This conserves both electricity by reducing grid usage, and water by preventing overwatering. It introduces the system components, reviews energy usage in Indian agriculture currently, and describes the research conducted to improve solar panel efficiency. Test results showed lower operating costs and maintenance compared to normal systems.
This document discusses the design and aims of a project to develop a cost-effective solar-powered water pump (SDP) for use by small-scale farmers in developing countries. The SDP is intended to provide irrigation with low operating costs as an alternative to expensive diesel pumps. The project aims to (i) fabricate a demonstration model, (ii) study the effects of solar concentration on water production, and (iii) recommend using mirrors to enhance system performance. The scope is limited to developing a model for small-scale irrigation to demonstrate feasibility and application of solar energy for pumping needs.
M Haroon REMENA -B20- PV-Diesel hybrid systemsMuhammad Haroon
Solar hybrid systems are power systems that combine solar
power from a photovoltaic system with another energy
source. One of the most common hybrid systems being PV diesel hybrid system, coupling PV and diesel generators, also
known as diesel gensets.
Introduction to Off Grid Solar Power systemShoeb Ali Khan
This document provides an overview of off-grid solar power systems, including their applications and key components. Off-grid solar systems are not connected to the main electricity grid and instead use solar panels, batteries, and other components to provide power independently. They can be used for homes, clinics, schools, businesses, water pumping, street lighting, and more. The main components of an off-grid solar system are PV solar panels, a solar charge controller, battery bank for storage, an inverter to convert DC to AC power, and electrical safety devices. Together these components collect solar energy, store it in batteries, and allow the power to be used as needed.
Restrainment of renewable energy systems and smart grids pptBIPUL KUMAR GUPTA
The document discusses renewable energy systems and smart grids. It provides background on increasing usage of renewable energy after oil crises and challenges around energy harvesting. It then summarizes India's electricity needs, deficits, and production. Specific renewable energy systems discussed include wind turbines, which convert linear wind motion to rotational energy, and solar energy systems like photovoltaic cells. Smart grids are defined as modernized electrical grids that use information technology to improve efficiency and sustainability of electricity production and distribution. Applications of renewable energy systems and advantages of smart grids are also summarized.
The Bakun Hydropower Project in Sarawak, Malaysia is the most efficient power station in the world. IMPSA was contracted to supply electromechanical equipment, including four 350 MW Francis turbine generating units, main power transformers, control and protection systems, and other ancillary equipment. The project involves constructing a 205m high concrete dam and powerhouse with eight generating units totaling 2,800 MW of installed capacity. The high efficiency of 94% is achieved through IMPSA's efficient Francis turbine design and integrated automation and control systems.
This document discusses an autonomous solar powered irrigation system. It aims to supply water for fields through a solar powered water pump and automate the system for better resource management. Farmers can water fields remotely using GSM technology, which provides status messages. The system optimizes power usage through water management and saves subsidized electricity. It provides an efficient and cost-effective way to automate irrigation in agriculture.
White Paper - Reducing Diesel Consumption with AHI BatteriesSteve Wilmot
1) The document discusses how adding energy storage like Aquion's Aqueous Hybrid Ion (AHI) batteries to microgrid systems with diesel generators and solar panels can significantly reduce diesel consumption and costs.
2) It provides an example of a resort in Southeast Asia that is analyzing adding solar and AHI battery storage to their existing diesel generator system. Modeling shows that medium and small storage systems can reduce the levelized cost of electricity compared to using just diesel or adding solar alone.
3) The results indicate that AHI battery storage is beneficial for reducing costs and diesel use across different system sizes and diesel price points for the resort, through increasing the efficiency of the diesel generators and allowing more solar energy to
This document discusses hybrid power systems which combine two or more sources of electricity generation, usually renewable sources like solar and wind, to provide reliable power. The objectives of hybrid systems are reducing use of non-renewable sources, improving reliability, minimizing costs, and better utilizing renewables. Examples discussed include solar-wind, wind-diesel, and microgrids which integrate distributed generation and storage. Hybrid systems provide continuous power and reduce fuel needs but require more complex control systems.
IRJET- Residential Hydro Power GenerationIRJET Journal
This document describes a proposed residential hydro power generation system to provide electricity for rural homes. It involves using the water pressure and flow from an elevated storage tank through household pipes to rotate a small-scale hydro turbine and generator. The system would include a turbine, generator, batteries for energy storage, and distribution of power to power lights, appliances, and other loads. The document provides details on estimating the available power based on head and flow rate, turbine design, generator and battery selection, and the overall working mechanism of using household water flow to generate useful electricity for homes.
Kuching | Jan-15 | Hydro Power Technology Development in Indonesia Lessons le...Smart Villages
The second in our series of workshops designed to gather input from stakeholders involved in existing off-grid projects in Africa, Asia and Latin America. This event is workshop scheduled to be held in Malaysia for the ASEAN countries will be organised by the Academy of Sciences Malaysia (ASM) in collaboration with Universiti Malaysia Sarawak (UNIMAS).
Solar irrigation system is the green way of energy production,so it is a good option for farmers for irrigation. After the initial cost it will become free of charge to farmers and farmers can install it anywhere.
This document describes a solar smart irrigation system that was prepared by students at HK HR JSPD. The system uses solar power to run water pumps that pump water from a bore well to a tank. A controller and moisture sensor are used to automatically regulate the outlet valve and control the flow of water from the tank to the irrigation field. This optimizes water use and conserves electricity by reducing use of grid power. It also conserves water by reducing losses. The document provides details on the components, cost analysis, advantages over traditional systems, and limitations. Product surveys of solar panels from Shell and GE are also included.
This ppt explains how to use of proper method of irrigation and it is important.The main reason is the lack of rains & scarcity of land reservoir
water. This ppt is based on microcontroller .
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be
applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide
guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
This document provides an introduction to solar water pumping systems. It describes the typical components, which include solar panels to generate direct current electricity and pumps, either centrifugal or submersible, to pump water. The document outlines the two basic types of systems - battery-based systems, which store solar energy in batteries, and solar direct systems, which pump water directly from solar power without batteries. It provides block diagrams of both types of systems and describes how they work. The document also discusses considerations for installing a solar water pumping system and provides examples of applications.
Study on solar irrigation system in bangladeshTania Marzia
This document summarizes a study on solar irrigation systems in Bangladesh. It discusses how agriculture is important to Bangladesh's economy but irrigation is challenging due to water scarcity. Currently, irrigation is powered by conventional electricity or diesel generators. The study proposes using solar power as a more cost-effective solution for irrigation. It describes different types of solar irrigation systems and notes that solar is most competitive for low-pressure irrigation needs. Present solar power generation in Bangladesh is around 15-20 MW but there is potential to increase irrigation powered by solar.
This slide give brief idea about need of solar resource and its utilization for irrigation in India.its cost effectiveness.Dayton Power have such water pumping solution to serve Indian farmer in best way.
The document discusses solar powered water pumping solutions provided by Supreme & Company Pvt. Ltd. It describes how solar energy is used to pump water from sources like wells, rivers, and ponds through pipes to where it is needed. It explains that solar pumping systems are sized based on water requirements and can pump water during the day using solar power and at night using batteries charged during the day. It also notes that solar powered pumps do not produce any air pollution.
Rhythm & Rehab provides music therapy services including group and individual neurologic music therapy, adapted piano lessons, and musical theatre classes. The internship focused on developing early intervention activities using sensorimotor music-based treatment for children ages 3-5 with autism. Over five weekly sessions, the interns music therapy project showed improvements in students' sensorimotor skills like holding instruments and breath control. Moving forward, the intern recommends continued early intervention and raising community awareness of music therapy's benefits.
Nitesh Govindarajulu is seeking a challenging position where he can utilize his skills. He has over 3 years of experience as an Oracle Taleo Functional Consultant at Mindtree, where he provides support for Hindustan Unilever's Taleo implementation across 56,000 employees globally. His responsibilities include supporting the recruiting, performance, configuration, and reporting modules. He is proficient in Taleo and has certifications and achievements in successfully managing projects and support teams. He holds a B.E. in Information Science and is interested in sports and travel.
Rafael Villafane has over 20 years of experience in logistics and financial management for the US Navy, including experience in supply chain management, warehousing, material handling, and leadership. He currently serves as the Director of Logistics for a Navy cargo handling battalion where he oversees logistics support and civil engineering programs. Villafane also has experience coordinating postal and shipping services, recruiting, and serving as a logistics/contracting/financial manager aboard a Navy ship.
This document discusses planning for an upcoming week of training activities, including reviewing situation reports, practicing conversing with locals, and presence patrol. It provides examples of situation reports to review and correct, discusses initiating small talk and conversations with strangers, and asks students to reflect on what was useful from the conversing lesson.
El documento define el aprendizaje autónomo como la capacidad de aprender por uno mismo. Explica que se basa en la autonomía, autorregulación, independencia, responsabilidad, pensamiento crítico, libertad y respeto. Detalla que implica el desarrollo intelectual, personal y social a través del trabajo independiente, y que un portafolio organiza las evidencias del proceso de evaluación. Además, cita pensamientos de Sócrates, Platón y Aristóteles sobre la importancia de desarrollar la capacidad de ser autodidact
Este documento describe el aprendizaje autónomo y significativo. El aprendizaje autónomo implica que el estudiante asume responsabilidad sobre su propio aprendizaje estableciendo su propio ritmo. Requiere condiciones como un sistema de tutoría, esfuerzo docente, preparación en TIC, y nuevas actitudes del profesor y alumno. El aprendizaje significativo facilita la adquisición duradera de conocimientos a través de la motivación, conocimientos previos, y construcción de significados. Se requieren materiales significativos con
Neha Chachra Resume for Marketing and Communication (1)Neha Chachra
Neha Chachra has nearly 9 years of experience in marketing, business development, event management, client management, and team leadership in various industries. She is currently a Senior Manager of Marketing & Communications at Finlace Consulting, an Indian real estate consulting firm. Her responsibilities include promotional activities, sales support, client research, budget management, and coordinating with media, builders, and other partners. Previously, she held marketing roles at Doon Business School, Venus Fashions UK, Primark Stores, and EXL Services, where she gained experience in branding, sales, event management, and customer service. She holds an MBA from Heriot-Watt University in the UK.
Solar systems for irrigation have the potential to provide reliable renewable energy for pumping water in India. The Maharashtra government piloted a 7,540 solar-powered pump scheme in 2015. An analysis found that for unelectrified farmers, solar pumps are often less costly than grid extensions and can improve incomes by increasing water access. However, the pilot lacks incentives for efficient groundwater use and farmers are unfamiliar with the technology. Alternative models like on-grid systems that pay farmers for excess power could address these issues while reducing costs. More research is needed to understand the best financial and technical designs for solar irrigation that sustainably meet farmer and energy needs.
Concept Note on implementation of solar water pump across INDIAWasim Ashraf
- Solar Energy Corporation of India (SECI) operates under the Ministry of New and Renewable Energy to promote solar energy in India.
- The document proposes implementing solar water pumps for irrigation to reduce subsidies, improve reliability of water access for farmers, and allow excess solar energy to be exported to the grid.
- Two business models are proposed: 1) SECI provides 50% funding and farmers pay 50% upfront, or 2) SECI provides 100% funding and farmers repay the cost over time through electricity savings. SECI would coordinate with state governments, companies, and farmers to install solar pumps.
This document summarizes information on solar power plant costs in India and Germany. It discusses how solar power plants are necessary in remote areas of India to improve standards of living by providing electricity. While improvements in technology have led to reduced costs, solar power is still not competitive with conventional power sources. However, direct conversion of solar power to electricity appears to be cheaper in India than in Germany. It also provides details on specific costs of components of solar power systems in India like modules, batteries, inverters, and charge controllers over time, showing a reduction of around 21% in costs over 6 years.
Supporting the Scale up of Solar Pumping in India through Remote Monitoring Satya Kumar DV
Presentation by DV Satya Kumar in Session 24 on
"Food, Water and Energy Nexus : Perspectives from Asia"
Asia Clean Energy Forum, 2016
India is known for 100GW solar target by 2022, low solar tariffs and competitive bidding. India added 3GW solar in 2015-16 adding to a cumulative capacity of 8GW and will be adding 10GW in 2016-17. Another success achieved in solar in Inida, is in the offgrid solar pumping program in Rajasthan which realised the Food - Water - Energy nexus and provided a holistic solution for the farmer's livelihood. Rajasthan's Horticulture Department, under the leadership of Dr Dinesh Kumar Goyal, introduced a composite irrigation package through creation of water harvesting structures, recharging ground water, pumping with solar pumps and irrigating through drip. Some farmers' income levels increased four-fold and even young MBA graduates were inspired to take up farming.
To support the scale up of solar pumping program, we developed a project for "Remote Performance Monitoring and Outsourced Service Management of Solar Pumps and Off-grid Solar PV Plants" which was recently selected for funding by PACEsetter Fund in India, which is a joint initiative of Ministry of New and Renewable Energy, Govt of India and the US State Department.
This document provides an overview of the solar PV landscape in India. It discusses the key drivers for PV in India, including rising energy needs, persistent energy deficits, overdependence on coal and oil imports, and abundant solar resources. The document outlines opportunities for off-grid PV applications like rural lighting and electrification. It also discusses the benefits of PV for India, including transforming lives, creating jobs, and providing productive and reliable power. The document reviews the current small size of India's PV market and industry. It identifies challenges facing PV growth in India and recommendations to accelerate PV adoption and make India a global PV leader, including developing financing models, prioritizing grid-connected PV, and expanding deployment in off-grid applications.
Renewable Energy Power Projects for Rural Electrification in IndiaMohit Sharma
As demand for energy is increasing around the world & in India, there is a positive growth trend coming in the renewable energy sector also. There are many rural and remote areas which are energy deficient.
Private companies are encouraged by Government creating opportunities by various governmental schemes like Rajiv Gandhi Grameen Vidyutikaran Yojna, Distributed Decentralized Generation and support in finance, distribution, technology, land, etc. As every area has its dynamics and differs from others in terms of topography, density of population and energy needs, there is a need of study for specific features related to a region (like a cluster of 19 villages in Gaya, Bihar requiring about 750kw Plant studied here) with the help of surveys, financial tools and earlier standards. Other renewable sources and areas are also covered in the book. The confidential information is edited-redacted.
Solar Water Pump - a new Innovative ProjectANURAG BERA
This is our Project Work in our course "Application of Information Technology".Here we have discussed regarding Solar Water Pump implementation & it's utility in Modern Agricultural System
1) The document discusses renewable energy as an option for sustainable rural development in India, as rural areas often lack access to the power grid.
2) It notes that renewable sources like solar, wind and biomass could play a key role in powering rural villages through off-grid solutions. However, there are also limitations to renewable technologies based on local conditions and weather dependence.
3) The author argues that India needs a national policy for rural electrification that takes a decentralized approach, considers local resource availability, and promotes small-scale renewable manufacturing to enable self-sufficient village energy systems. A generic policy framework and more research is needed to overcome challenges in implementation.
InfralineEnergy | Solar Irrigation Pumps in India : Market PotentialInfraline Energy
This document provides an overview of the market potential for solar irrigation pumps in India. It notes that India's agriculture sector relies heavily on groundwater irrigation powered by diesel or electric pumps. However, India faces power shortages and high fuel costs. The document finds potential to replace conventional pumps with solar pumps, given India's ample solar resources and the significant savings on fuel and electricity subsidies. It explores the drivers and challenges for solar pump adoption, as well as case studies on the economic and environmental benefits of solar irrigation.
Manan Juneja's Report on REC MARKET DEMANDManan Juneja
This document summarizes a study on estimating the demand for Renewable Energy Certificates (RECs) in India under the REC mechanism introduced by the government to promote non-conventional renewable energy sources. The study analyzes various scenarios for Renewable Purchase Obligation (RPO) trajectories based on renewable energy supply potential and targets. It highlights challenges and opportunities for developing renewable energy in India. The objective is to model REC demand and supply in coming years considering changing RPOs, increasing renewable energy capacity and generation, and data from relevant authorities.
Solar Power PV Pumpset_A way forward irrigation solutionSaurav Paul
This document discusses opportunities for solar-powered water pumps in Indian agriculture. It notes that most Indian farmers currently rely on diesel or electric pumps for irrigation, but solar pumps could provide an economically viable and environmentally friendly alternative. While initial costs are high, solar pumps have lower operating costs and maintenance over time. The document evaluates companies currently selling solar pumps and outlines a strategy for a new company. The proposed company would offer integrated electric and solar pump solutions, explore different sales models, and target high-value crop growers and prosperous farmers to overcome the high upfront costs.
Solar Power as a Remunerative Crop (SPaRC)_Tushaar Shah,IWMI_ICIMOD-WLE Sprin...India Water Portal
This document discusses solar power as a remunerative crop (SPaRC) in India and two approaches to incentivizing solar generation. It argues that farmers have a comparative advantage in solar generation due to land ownership and proposes that solar irrigation pumps (SIPs) be the core of India's national solar mission. Under an IWMI proposal, SIPs would be grid-connected and farmers paid a subsidy plus guaranteed price for excess power sold to the grid. This could generate solar jobs, reduce carbon emissions, and accelerate agricultural growth while conserving water. However, key barriers to SPaRC uptake include unfamiliarity, coordination costs for solar companies, and opposition from power distribution companies.
This document provides an introduction to the solar energy industry in India. It discusses that India has high solar isolation and population density, making it well-suited for solar power. India has ambitious targets to produce solar power, including plans to generate 20 GW by 2020 and 1,000 MW by 2013. Solar power can be generated through concentrating solar power systems using mirrors and tracking systems, or through photovoltaic systems that convert sunlight directly to electricity using solar cells. As of July 2012, India had over 1 GW of installed grid-connected solar capacity, with Gujarat producing over 65% of India's total solar power. The industry is growing rapidly to help meet India's increasing energy needs.
Presentation by A Kishore, International Food Policy Research Institute, at the CCAFS Workshop on Institutions and Policies to Scale out Climate Smart Agriculture held between 2-5 December 2013, in Colombo, Sri Lanka.
World Bank Water project for Andhra Pradeshguest0bc3481b
The document summarizes irrigation reforms in Andhra Pradesh, India that were supported by the World Bank. It discusses how Andhra Pradesh was the first state to enact legal changes to enable water sector reforms in 1995. This included establishing water user associations and transferring operation and maintenance of irrigation infrastructure to these groups. However, the reforms faced challenges from policy contestation among different actors like irrigation bureaucrats and users. While the reforms aimed to increase participation, they did not fully decentralize control and served to preserve existing power structures.
World Bank Water project for Andhra Pradeshguest0bc3481b
The document summarizes irrigation reforms in Andhra Pradesh, India that were supported by the World Bank. It discusses how Andhra Pradesh was the first state to enact legal changes to enable water sector reforms in 1995. This included establishing water user associations and transferring operation and maintenance of irrigation infrastructure to these groups. However, the reforms faced challenges from policy contestation among different actors like irrigation bureaucrats and users. While the reforms aimed to increase participation, they did not fully decentralize control and served to preserve existing power structures over water management.
World Bank Water project for Andhra Pradeshguest0bc3481b
The document summarizes irrigation reforms in Andhra Pradesh, India that were supported by the World Bank. It discusses how Andhra Pradesh was the first state to enact legal changes to enable water sector reforms in 1995. This included establishing water user associations and transferring operation and maintenance of irrigation infrastructure to these groups. However, the reforms faced challenges from policy contestation among different actors like irrigation bureaucrats and users. While the reforms aimed to increase participation, they did not fully decentralize control and served to preserve existing power structures over water management.
World Bank Water project for Andhra Pradeshguest0bc3481b
The document summarizes irrigation reforms in Andhra Pradesh, India that were supported by the World Bank. It discusses how Andhra Pradesh was the first state to enact legal changes to enable water sector reforms in 1995. This included establishing water user associations and transferring operation and maintenance of irrigation infrastructure to these groups. However, the reforms faced challenges from policy contestation among different actors like irrigation bureaucrats and users. While the reforms aimed to increase participation, they did not fully decentralize control and served to preserve existing power structures.
World Bank Water project for Andhra Pradeshguest0bc3481b
The document summarizes irrigation reforms in Andhra Pradesh, India that were supported by the World Bank. It discusses how Andhra Pradesh was the first state to enact legal changes to enable water sector reforms in 1995. This included establishing water user associations and transferring operation and maintenance of irrigation infrastructure to these groups. However, the reforms faced challenges from policy contestation among different actors like irrigation bureaucrats and users. While the reforms aimed to increase participation, they did not fully decentralize control and served to preserve existing power structures over water management.
World Bank Water project for Andhra Pradeshguest0bc3481b
The document summarizes irrigation reforms in Andhra Pradesh, India that were supported by the World Bank. It discusses how Andhra Pradesh was the first state to enact legal changes to enable water sector reforms in 1995. This included establishing water user associations and transferring operation and maintenance of irrigation infrastructure to these groups. However, the reforms faced challenges from policy contestation among different actors like irrigation bureaucrats and users. While the reforms aimed to increase participation and cost recovery, they did not fully decentralize control and served to preserve existing interests more than establish participatory management.
Similar to Solar power water pumping for irrigation in bihar india (20)
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...Tatiana Kojar
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
A Comprehensive Guide to DeFi Development Services in 2024Intelisync
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Solar power water pumping for irrigation in bihar india
1.
2.
3.
4. Disclaimer
The present document is an attempt to put together relevant information to stimulate thinking and
raise basic knowledge on the status and potentials for solar water pumps in India in general and
Bihar in particular. Note that this document is neither exhaustive nor complete on the topic of solar
water pumps. The information has been compiled from reliable documented and published references/
resources, as cited in the publication. Mention of any company, association or product in this document
is for informational purposes only and does not constitute a recommendation of any sort by GIZ.
5. i
Potential for Solar PV Water Pumping for Irrigation in Bihar
EXECUTIVE SUMMARY
Scarcity of electricity coupled with the increasing
unreliability of monsoon rains and prevalentcostly
diesel pumping systems pose an economic risk
to small and marginal farmers. A complex set
of factors including global warming, competitive
land use and lack of basic infrastructure is creating
new challenges for India’s vast agrarian population.
The ever increasing mismatch between demand
and supply of energy, and electricity in particular,
is posing challenges especially to farmers in remote
areas. This coupled with the increasing unreliability
of monsoon rains is forcing farmers to look at
alternate fuels such as diesel for running irrigation
pump sets. Currently, India uses 12 million grid-
based (electric) and 9 million diesel irrigation pump
sets (C-STEP 2010). However, the high operational
cost of diesel pump sets forces farmers to practice
deficit irrigation of crops, considerably reducing
their yield and income.
Solar water pumping systems constitute a cost-
effective alternative to irrigation pump sets that
run on grid electricity or diesel. Solar Photovoltaic
(SPV) sets constitute an environment-friendly and
low-maintenance possibility for pumping irrigation
water. Studies estimate India’s potential for Solar PV
water pumping for irrigation to be 9 to 70 million
solar PV pump sets, corresponding to at least 255
billion ltr/year of diesel savings (HWWI 2005).
However, solar PV water pumping systems remain
a rather unknown technical option, especially in the
agricultural sector. They have not yet been seriously
considered in agricultural planning in the country,
nor has the private sector taken an active lead.
The Indo-German Energy Programme (see
chapter 1.2, Box 1) is supporting the development
of favourable market conditions for solar
irrigation systems in Bihar. Regulatory and market
related framework conditions need to be improved
to incentivise private investors to provide access to
clean energy in rural areas. This study is a first step.
It provides an overview of the current usage of solar
water pumps for irrigation, along with opportunities
and challenges for their usage in India and Bihar
in particular. The findings provide strategic inputs
to the Indo-German Energy Programme for the
preparation of project activities to support the solar
water pumping sector in Bihar.
Solar pumping technology has been continuously
improved since the early 1980s. There are three
main solar water pumping configurations used in
India:
1 Brushless Direct Current (DC) pump: Highest
efficiency, low maintenance, but higher cost
compared to other pumping technologies.
Water gushing from a solar water pump in Bihar
Picture Courtesy: Nilanjan Ghose
6. ii
Potential for Solar PV Water Pumping for Irrigation in Bihar
2 DC positive displacement pump: Less efficient
than brushless motors but performs well under
low power conditions, and can achieve high lift.
3 AC centrifugal pump: Not as efficient as DC
pumps, yet, reasonably priced, easily available/
serviced and deep reaching, making it currently
the most preferred choice among users and system
integrators.
The first signs of a developing solar PV water
pumping market in India were seen in 1993-94
with the Ministry of New and Renewable Energy
(MNRE) promoting solar PV water pumping
systems for irrigation and drinking water. Capital
subsidies, low cost financing and 100% depreciation
in the first year were meant to incentivise farmers
to purchase the Solar PV systems at a concessional
rate, as low as 10% of the actual equipment cost (e.g.
farmers in Punjab availed 1,850 solar pump systems
for agricultural use under the programme). However,
with the Income Tax Department redefining the
parameters for claiming accelerated depreciation, the
financial incentives became redundant. The MNRE
Programme was unable to achieve its objective. As of
March 2012, 7,771 solar PV water pumping systems,
compared to the targeted 50,000, had been installed.
In 2010, solar water pumping became part of
the off-grid and decentralised component of
the Jawaharlal Nehru National Solar Mission
(JNNSM). Besides the capital subsidies from MNRE
(30% subsidy) and state governments (equivalent
to 56-60%), there are no other specific financing
schemes for supporting farmers’ acquisition of solar
PV water pumping systems.
The strong government promotion/ subsidies
have limited the initiative of the private sector
in solar PV pumping systems to being linked
with the government programmes rather than
developing the market by themselves according
to the customer needs. Yet, there has been a recent
emergence of new private sector players. Claro
Energy Pvt. Ltd. and Atom Solar Systems are two
of these that are promoting solar PV water pumping
systems for irrigation in Bihar.
Solar PV water pumping for irrigation is a suitable
option for Bihar, which has ample availability
of surface and ground water (in particular in
Northern Bihar), suitable agricultural practices,
and sufficient solar radiation conducive for solar
PV water pumping. Thus, solar PV water pumping
constitutes an option to address the principal
1,800 Wp surface pump in Landra village, Punjab.
Picture Courtesy: Thomas Pullenkav
7. iii
Potential for Solar PV Water Pumping for Irrigation in Bihar
constraint of electricity for irrigation to ensure
agricultural growth to its full potential. Yet, the small
operational landholdings (2 ha and less) and leasing
of land also poses challenges to the deployment of
solar pumping for irrigation.
Tapping Bihar’s huge solar PV water pumping
potential remains limited by regulatory, market and
technology related challenges, keeping most private
actors in a watch and wait position. The WISE
report “Renewable Energy Potential Assessment and
Renewable Energy Action Plan for Bihar” (2011) has
estimated the potential for solar PV water pumping
to be 2,665 MWp upto 2022. This assessment
is based on net irrigated area in the state and an
assumption that a solar array of 0.6 kWp is required
to power a SPV pump that can irrigate 1 ha of land.
HWWI in their study of the “CDM Potential of SPV
Pumps in India (2005)” has estimated a potential of
11 million solar PV pumping systems in Bihar. Key
challenges and potential solutions for tapping this
solar water pumping potential are:
Market Related Barriers
Current Barriers/Obstacles Potential Corrective Measures
High Upfront Cost Smart Subsidies/Innovative Finance
Lack of Finance Mechanisms Innovative Consumer/Business Finance
Mechanisms
Low Awareness Among Consumers
and Other Relevant Stakeholders
Awareness Campaigns
Lack of Maintenance and Support Localised Service Infrastructure
Lack of Market Intelligence and Information Provision of Adequate Resources/Market Data
Danger of Theft Portable/Community Owned Systems and
Insurance
Regulatory Issues
Current Barriers/Obstacles Potential Corrective Measures
Restricted Financial Engineering Innovative Policies and Financial Engineering
Maze of Government Departments “Single-Window” Approach
Lack of Market-Oriented Policies Policies providing a Level Playing Field with
diesel pumps
Concealed Tenancy and Small Landholdings Tenancy Reform, Leasing Mechanisms & Group
Investments
Technology Related Barriers
Current Barriers/Obstacles Potential Corrective Measures
Lack of Standardisation and Quality Assurance Standardised Products that Cater to Local Needs
Lack of local Manufacturers Promotion of Local Manufacturing
8. iv
Potential for Solar PV Water Pumping for Irrigation in Bihar
Even though solar PV is a competitive option in the
face of diesel (64.2% of the cost of diesel pumps
over ten years), its adoption is contingent to the
ease of access to subsidies and/or mechanisms that
reduce the initial investment costs to the level of
conventional pumps. This needs to go hand in
hand with awareness campaigns on SPV pumps
and supportive government policies. The study
concludes, that policy makers, the private sector and
other facilitating stakeholders like GIZ and financial
institutes need to come together and address the
regulatory, market- and technology related barriers
to large-scale deployment of the solar PV water
pumping systems in Bihar.
Group of farmers using a solar water pump in Gonkura village of Nalanda District, Bihar
Picture Courtesy: Nilanjan Ghose
9. Potential for Solar PV Water Pumping for Irrigation in Bihar
CONTENTS
EXECUTIVE SUMMARY i
GLOSSARY viii
1. INTRODUCTION 1
1.1. Backdrop 1
1.2. Objective 1
2. METHODOLOGY 2
2.1. Interview Structure 3
2.2. Scope and Limitation 3
3. SOLAR PV WATER PUMPING - TECHNOLOGY OVERVIEW 3
4. POTENTIAL FOR SOLAR IRRIGATION IN INDIA 5
4.1. Geographical Areas Suited for Solar Irrigation 5
5. STATUS OF SOLAR WATER PUMPING IN INDIA 9
5.1. Previous Experiences 9
5.2. Ongoing Programmes 11
5.3. Activities of the Private Sector 12
5.4. Finance Mechanisms 13
5.5. Activities of Agricultural Universities 13
5.6. Technology Development 13
5.7. Challenges and Barriers for Growth of Solar PV Water Pumping in India 14
6. POTENTIAL FOR SOLAR IRRIGATION IN BIHAR 15
6.1. Surface and Ground Water Levels in Bihar 15
6.2. Solar Radiation in Bihar 16
6.3. Agriculture in Bihar 17
6.4. Requirement of Water for Major Crops of Bihar 18
6.5. Availability of Power 19
6.6. Existing Stakeholders in the Solar PV Water Pumping Sector 19
6.7. Potential for Solar PV Water Pumping in Bihar 19
7. NEEDS ASSESSMENT 21
7.1. Market Related Barriers and Potential Solutions 21
7.2. Regulatory Issues and Potential Solutions 22
7.3. Technology Related Barriers and Potential Solutions 24
10. Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 1: ECONOMICS OF SOLAR PV WATER PUMPING VIS-A-VIS DIESEL POWERED
WATER PUMPING SYSTEMS 25
ANNEXURE 2: JNNSM TECHNICAL SPECIFICATIONS FOR SOLAR PV WATER PUMPING SYSTEMS 27
I. Definition 27
II. Performance Specifications and Requirements (Duty Cycle) 27
III. PV Array 27
IV. Motor Pump-Set 28
V. Mounting Structures and Tracking System 28
VI. Electronics and Protections 29
VII. On/Off Switch 29
VIII. O/M Manual 29
IX. Indicative Technical Specifications 30
ANNEXURE 3: CHECK LIST / GUIDE FOR INTERVIEWS AND EXPERT CONSULTATIONS 32
ANNEXURE 4: STAKEHOLDER WORKSHOP 33
ANNEXURE 5: LIST OF ORGANISATIONS/CONTACTS 38
ANNEXURE 6: CASE STUDIES OF EXISTING BUSINESS MODELS FOR SOLAR PV WATER PUMPING 40
I Claro Energy Pvt. Ltd. 40
II Atom Solar Systems 40
III Jain Irrigation Systems Ltd. 41
BIBLIOGRAPHY 42
11. Potential for Solar PV Water Pumping for Irrigation in Bihar
LIST OF TABLES
Table 1: Ground Water Aquifer System in India 7
Table 2: Financial Assistance for the MNRE Solar PV Water Pumping Programme 10
Table 3: PV pumps installed by different SNAs under the PV Water Pumping Programme 10
Table 4: MNRE Indicative Technical Specifications for Surface Pumps and Submersible Pumps 14
Table 5: Annual Radiation (AVG/M) 16
Table 6: Landholding in Bihar 17
Table 7: Agriculture in Bihar 18
Table 8: Irrigation Requirement and Growing Period for Major Crops of Bihar 18
Table 9: 1 HP Pump Powered by a 2kVA DG Setvis-as-vis a Solar PV Water Pumping System 25
Table 10: Comparison of 10 years of Life Cycle Cost 25
Table 11: Cost Comparison between Diesel and Solar PV Pump of 1 HP Rating 26
Table 12: Technical Specifications of Solar Shallow Well Pumping Systems 30
Table 13: Technical Specifications of Solar Deep Well Pumping Systems 30
Table 14: List of Participants at the Stakeholder Workshop 37
Table 15: Field Visits 39
LIST OF FIGURES
Figure 1: Bihar’s Groundwater Status 15
LIST OF MAPS
Map 1: Hydrological Map of India 6
Map 2: Depth to Water Level Map (Pre Monsoon - 2011) 8
Map 3: Agro-Climatic Zones of Bihar 17
LIST OF BOXES
Box 1: Indo-German Energy Programme, Renewable Energy Component (IGEN-RE) 1
Box 2: Summary of Common PV Pumping Configurations in India 5
Box 3: Summary of the Potential for Solar Water Pumping for Irrigation in India 8
Box 4: The Case of Punjab 10
Box 5: The Case of Rajasthan - Rashtriya Krishi Vikas Yojana (RKVY) 11
Box 6: The case of Bihar - Bihar Saurkranti Sinchai Yojana (BSSY) 12
Box 7: Key players 12
Box 8: Summary of the Potential for SPV Water Pumping for Irrigation in Bihar 16
Box 9: Summary of Solar Radiation in Bihar 16
Box 10: Bihar’s estimated solar PV water pumping potential 20
12. viii
Potential for Solar PV Water Pumping for Irrigation in Bihar
GLOSSARY
AC Alternating Current
AVG/M Average per Month
Bcm Billion cubic metres
BIS Bureau of Indian Standards
BLDC Brush Less Direct Current
BMZ Federal Ministry for Economic Cooperation and Development, Government of the
Federal Republic of Germany.
BREDA Bihar Renewable Energy Development Agency
BSSY Bihar Saurkranti Sinchai Yojana
CDM Clean Development Mechanism
CEA Central Electricity Authority
CREDA Chhattisgarh State Renewable Energy Development Agency
C-STEP Centre for Study of Science, Technology and Policy
DC Direct Current
DG Diesel Generator
FI Financial Institutions
GI Galvanised Iron
GIZ / GIZ GmbH Deutsche Gesellschaft für Internationale Zusammenarbeit GmbH
Ha Hectare
HAREDA Haryana Renewable Energy development Agency
HDPE High Density Polyethylene
HOMER Hybrid Optimization Model for Electric Renewables
Hort. Horticulture / Horticultural
HP Horse Power
Hr(s) Hour(s)
HWWI Hamburgisches Welt Wirtschaftsinstitut
IEC International Electro technical Commission
IGEN- RE Indo-German Energy Programme - Renewable Energy Component
IHD Institute for Human Development
IREDA Indian Renewable Energy Development Agency
JISL Jain Irrigation Systems Limited
13. ix
Potential for Solar PV Water Pumping for Irrigation in Bihar
JLG Joint Liability Group
JNNSM Jawaharlal Nehru National Solar Mission
KREDL Karnataka Renewable Energy Development Limited
kVA Kilo Volt-Ampere
kWh Kilo Watt Hour
kWh/m2 Kilo Watt hour per square metre
kWp Kilo Watt Peak or Peak Kilo Watt
MFI Micro-finance institution
Mm Millimetre
MPPT Maximum Power Point Tracker
Mtrs. Metres
MNRE Ministry of New and Renewable Energy, Government of India
MW Mega Watt
MWp Mega Watt Peak or Mega Peak Watt
MWRD Minor Water Resources Department, Govt. of Bihar
NABARD National Bank for Agriculture and Rural Development
NASA National Aeronautical and Space Administration
NBFC Non-Banking Finance Companies
NEDCAP New and Renewable Energy Development Corporation of Andhra Pradesh
NGO Non-Government Organisation
NPK Nitrogen, Phosphorus and Potassium
NREL National Renewable Energy Laboratory
p.a. Per Annum
PEDA Punjab Energy Development Agency
PV Photovoltaic
RD Research and Development
RE Renewable Energy
RFID Radio Frequency Identification
RKVY Rashtriya Krishi Vikas Yojana
SELF Solar Electric Light Fund
SHG Self Help Group
SME Small and Medium Enterprise
SNAs State Nodal Agency(ies)
14. x
Potential for Solar PV Water Pumping for Irrigation in Bihar
SPV Solar Photovoltaic
STC Standard Test Conditions
Sq.m Square meter
TDH Total Dynamic Head
TEDA Tamil Nadu Energy Development Agency
UPNEDA Uttar Pradesh New and Renewable Energy Development Agency
US$ United States Dollar
V Volt
VFD Variable Frequency Drive
WISE World Institute for Sustainable Energy
Wp Watt Peak or Peak Watt
15. 1
Potential for Solar PV Water Pumping for Irrigation in Bihar
1. INTRODUCTION
1.1. Backdrop
A complex set of factors including global warming,
competitive land use and lack of basic infrastructure
is creating new challenges for the vast agrarian
population in India. The ever increasing mismatch
between the demand and supply of energy in general
and electricity in particular, is posing challenges
to farmers located in remote areas. The scarcity of
electricity coupled with the increasing unreliability
of monsoon rains is forcing farmers to look at
alternate fuels such as diesel for running irrigation
pump sets. However, the costs of using diesel for
powering irrigation pump sets are often beyond the
means of small and marginal farmers. Consequently,
the lack of water often leads to damaging of crop,
thereby, reducing yields and income. Hence, using
conventional diesel powered pumping systems poses
an economic risk to the farmers.
Environment-friendly, low-maintenance, solar
photovoltaic (SPV) pumping systems provide new
possibilities for pumping irrigation water. However,
they constitute a rather unknown technical option,
especially in the agricultural sector. Thus far they
have not yet been seriously considered in agricultural
planning in the country.
1.2. Objective
Given this backdrop, the Indo-German Energy
Programme- Renewable Energy component
(IGEN-RE) (for further information see Box
1) decided to assess the technical maturity and
the market potential for solar powered water
pumping for irrigation. This report provides
an overview of the current usage of solar water
pumps for irrigation, along with opportunities
and challenges for their usage in India in general
and Bihar in particular. The findings constitute
strategic inputs to GIZ and MNRE, jointly
preparing a pilot project to support the solar
water pumping sector in Bihar.
Box 1: Indo-German Energy Programme, Renewa-
ble Energy Component (IGEN-RE)
The Renewable Energy Component of the Indo-German
Energy Programme (IGEN- RE) is a bilateral technical
co-operation measure between the Federal Ministry
for Economic Cooperation and Development (BMZ),
Government of the Federal Republic of Germany; and
the Ministry of New and Renewable Energy (MNRE),
Government of India. IGEN-RE aims at improving the
conditions for private investment in providing access
to clean energy in rural areas from renewable energy
sources. BMZ has commissioned the Deutsche
GesellschaftfürInternationaleZusammenarbeit GmbH
(GIZ), a federal enterprise based in Eschborn,
operating in more than 130 countries worldwide,
with the implementation of the programme.
1,800 Wp surface pump in Landra village, Punjab
Picture Courtesy: Thomas Pullenkav
16. 2
Potential for Solar PV Water Pumping for Irrigation in Bihar
2. METHODOLOGY
The study was conducted in five stages depicted below.
Stage 1
Secondary research and
data collection
Review of existing literature on solar water pumping in India, as well as,
telephone and one-to-one interviews with stakeholders from the solar
pumping sector.
Stage 2
Expert interviews to vali-
date data
One to one interviews / expert consultations with the private sector
(manufacturers, system integrators); Govt. officials of Bihar and other
states’ nodal agencies/ Individuals using SPV pumps for irrigation/
drinking water and/or implementing SVP programmes; and the civil
society promoting RE and/or agriculture.
Stage 3
Development of a draft
status paper
The paper illustrates the potential for solar water pumps in India in
general, and Bihar in particular.
Stage 4
Stakeholder workshop,
Patna 9/11/12
Presentation and validation of the study’s findings on solar water pumping
in Bihar. The stakeholders’ feedback on the potential and challenges in
rolling out solar water pumps in Bihar was collected.
Stag 5
Development of a final
status paper
The findings of the study and the feedback from the stakeholder’s
consultation programme assists in finalizing the paper on the potentials
for solar water pumps in India in general, and Bihar in particular.
Atom Solar Pump installed in Bihar
Picture Courtesy: Greenpeace
17. 3
Potential for Solar PV Water Pumping for Irrigation in Bihar
2.1. Interview Structure
The unstructured interviews contained open
questions of general nature. This permitted the key
informants to freely articulate their views on the
challenges and potential for using solar PV water
pumps for irrigation in Bihar. The questions/check
list used to guide the one-to-one interviews and
expert consultation is attached in Annexure 3.
2.2. Scope and Limitation
Since the key objective of the study was to provide
strategic inputs for the preparation of a pilot project
on solar PV water pumping for irrigation in Bihar,
only a general overview of the present potential for
solar PV water pumps for irrigation in India was
undertaken. The study was done with a greater focus
on the potential and challenges in the case of Bihar.
Further, focus of the study is primarily on the use
of solar PV water pumping systems for irrigation.
Although consideration has been given to the
potential use of solar PV water pumps in other areas
(i.e. fisheries, animal husbandry, drinking water,
etc.), this study does not comment on or reviews the
application in those sectors. This report also does not
comment on or reviews the use of other renewable
energy options for water pumping (i.e. windmills
and dual-fuel engines using biogas or producer gas).
3. SOLAR PV WATER PUMPING - TECHNOLOGY OVERVIEW
A Solar PV water pumping systems is essentially an
electric pump running on electricity generated by a
solar photovoltaic array.
Components of a solar PV water pumping system:
1 Solar PV array: The Solar PV array is a set of
photovoltaic modules connected in series and
possibly strings of modules connected in parallel.
2 Controller: The Controller is an electronic
device which matches the PV power to the
motor and regulates the operation of the pump
according to the input from the solar PV array.
3 Pump Set: Pump sets generally comprise of the
motor, which drives the operation and the actual
pump which moves the water under pressure.
Water pumping motors are “alternating current’
(AC) or ‘direct current’ (DC):
1 AC Motors: AC Motors require inverters to
convert DC to AC. Solar pumping systems
use special electronically controlled variable-
frequency inverters, which optimises matching
between the panel and the pump.
2 DC Motor: The DC Motors with permanent
magnet are generally more efficient. DC Motors
may be with or without carbon brushes. DC
motors with carbon brushes need to be replaced
after approximately every 2 years. Brushless
designs require electronic commutation. Brushless
DC Motors are becoming popular in the solar
water pumps.
Main solar water pump technologies:
1 Centrifugal Pump: Centrifugal pump uses
high-speed rotation to suck in water through the
middle of the pump. Most AC pumps use such a
centrifugal impeller.
2 Positive Displacement Pump: The positive
displacement pump is currently being used in
many solar water pumps. The pump transfers
water into a chamber and then forces it out using
a piston or helical screw.
18. 4
Potential for Solar PV Water Pumping for Irrigation in Bihar
Positive displacement pumps generally pump slower
than centrifugal pumps but have good performance
under low power conditions and achieve high
lift. However, when operating at low power,
the performance of the centrifugal pump drops
dramatically.
DC Surface Pump
Picture Courtesy:
www.madhurisolarpune.com
Centrifugal Pump
Picture Courtesy:
www.enggcyclopedia.com
DC Drive with Brushless DC Motor
Picture Courtesy:
Jain Irrigation Systems Limited
Types of Pump
1 Surface Pump: Placed besides the water source
(lake, well, etc.).
2 Submersible Pump: Placed in the water source.
3 Floating pump: Placed on top of the water.
Surface pumps are less expensive than submersible
pumps but they are not well suited for suction and
can only draw water from about 6.5 vertical meters.
Yet they are excellent for pushing water over long
distances.
More details on technical specifications of MNRE for
solar PV water pumps and the sector’s technological
development can be found in Annexure 2 and
Chapter 5.6.
Solar pump with tracking system by Claro Energy Pvt Ltd.
Picture Courtesy: Claro Energy Pvt Ltd.
19. 5
Potential for Solar PV Water Pumping for Irrigation in Bihar
Box 2: Summary of Common PV Pumping Configurations in India
Solar PV water pumping in India commonly uses three pumping configurations:
1. DC drive powering a brushless DC motor.
2. AC drive powering a centrifugal pump unit.
3. DC drive with brushed positive displacement pumps.
Each of the above technologies has specific features that make it suitable for particular applications.
The efficiency of positive displacement pumps decreases with the shallowness of the borehole, while
DC drive powering a brushless DC (BLDC) motor has the highest efficiency and least requirement for
maintenance even under low power conditions. Yet, AC drives powering a centrifugal pump unit have
a deep reach, are easily available, reasonably priced and can be serviced by the existing trained
manpower. This explains why AC drives are the preferred choice among users and system integrators.
4. POTENTIAL FOR SOLAR IRRIGATION IN INDIA
The potential of solar PV water pumping in
India is huge and the market has clearly started to
develop. There are reportedly more than 12 million
electric and 9 million diesel irrigation pump sets
in operation. The potential has been estimated by
different previous studies as below.
Centre for Study of Science, Technology and
Policy (C-STEP).“Harnessing Solar Energy –
Options for India” (2010) estimates that 9 million
diesel water pumping sets are in use in India. If 50%
of these diesel pumps were replaced with solar PV
pump sets, diesel consumption could be reduced to
the tune of about 225 billion litres/year.
As per the study conducted by HWWI, titled “CDM
Potential of SPV Pumps in India” (2005) about 70
million solar PV pumps can be installed by 2020. Of
these, 14 million are likely to be installed in Uttar
Pradesh and 11 million in Bihar.
The KPMG report titled “The Rising Sun” (2011)
estimates solar-powered agriculture pump sets to be
approximately 16,200 MW by 2017-22. However,
the potentials as mentioned above are likely to be
realized depending upon the extent of government
support and market conditions.
4.1. Geographical Areas Suited for Solar Irrigation
The ground water situation in India is highly
complicated due to diverse geological formations
(lithological and chronological variations, complex
tectonic framework, climatological dissimilarities
and various hydrochemical conditions.)
20. 6
Potential for Solar PV Water Pumping for Irrigation in Bihar
Map 1: Hydrological Map of India
Picture Courtesy: Groundwater Year Book 2011-12
The geographical distribution of hydrogeological units along with their ground water
potential is given in Table 1.
Ground Water Potential (Yield Litres/sec)
40 10
1
25-43
1-25 1-10 1-5
10-25
Consolidated/semi-Consolidated
Formations
Unconsolidated Formations
Hilly Areas
LEGEND
21. 7
Potential for Solar PV Water Pumping for Irrigation in Bihar
Table 1: Ground Water Aquifer System in India
System Area/Coverage Ground water Potential
Unconsolidated formations
- Alluvial
Indo-Gangetic
Brahmaputra Plains
Enormous reserves down to 600m depth. High
rainfall ensures recharge.
Unconsolidated formations
- Alluvial
Coastal Areas Reasonably extensive aquifers but risk of
saline water intrusion.
Unconsolidated formations
- Alluvial
Parts of Desert Area:
Gujarat Rajasthan
Scanty rainfall. Negligible recharge. Salinity
hazards. Ground Water availability at great
depths.
Consolidated/ semi-
consolidated formations
(sedimentaries, basalts
and crystalline rocks)
Peninsular Areas Availability depends on secondary porosity
developed due to weathering, fracturing etc.
Scope for ground water availability at shallow
depths (20-40 m) in some areas and deeper
depths (100-200 m) in other areas. Varying
yields.
Hilly Hilly States Low storage capacity due to quick runoff.
Generally, the depth to water level varies from 2
to 5 meter below ground level (mbgl) throughout
the year in the Sub-Himalayan area, North of river
Ganges; the North Eastern part of the country in the
Brahmaputra valley; and Eastern coast of Odisha,
Andhra Pradesh and Tamil Nadu state (GoI 2012).
The annual water level fluctuation in these areas
was also less than 2 to 5 meters below ground level
(mbgl) during the analysed time period.
22. 8
Potential for Solar PV Water Pumping for Irrigation in Bihar
Map 2: Depth to Water Level Map (Pre Monsoon - 2011)
Box 3: Summary of the Potential for Solar Water Pumping for Irrigation in India
The data shows that the Indo-Gangetic and Brahmaputra plains have the maximum potential for the
use of ground water for irrigation. The depth to water level is 2-5 meters below ground water level
(mgbl) and fast recharge is ensured, making this area/region ideal for the use of solar PV water
pumping systems.
Picture Courtesy: Groundwater Year Book 2011-12
INDEX
Depth to Water Level (m bgl)
2
2 to 5
5 to 10
10 to 20
20 to 40
40 m
Hilly Area
23. 9
Potential for Solar PV Water Pumping for Irrigation in Bihar
5. STATUS OF SOLAR WATER PUMPING IN INDIA
5.1. Previous Experiences
1993-2010: MNRE – Promotion of solar PV water
pumping systems for irrigation and drinking
water.
The first signs of a market for solar PV water
pumping in India became visible in 1993-94. MNRE
(then called the Ministry for Non-Conventional
Energy Sources or MNES) felt that the solar PV
water pumping was a technically proven product and
could be suitable for replacing diesel powered pumps
at unelectrified locations, provided the ecosystem
for the delivery of the systems was strengthened.
Consequently, MNRE initiated a programme for
the deployment of 50,000 solar PV water pumping
systems for irrigation and drinking water across the
country. Key aspects of the programme were:
yy Objective: Commercialization of solar PV water
pumping systems over a five year period across 29
states by strengthening the production base and
creating the required institutional infrastructure
for marketing and after sales support.
yy Assumption: The programme was based on
the assumption that the economies of scale and
technology up-gradation would drive down the
costs of SPV water pumping systems, making the
system economically viable.
yy Implementing Agencies: Indian Renewable
Energy Development Agency (IREDA) and State
Nodal Agencies (SNAs).
yy Intermediaries: Mainly non-banking finance
companies (NBFCs), which procured the system
from the manufacturers and channelized the
financing, capital and interest subsidies from
IREDA to the end users.
yy Financial Assistance: MNRE subsidised the
capital cost of the solar pump and the interest
costs. Besides channelizing this financial assistance
to the end user, IREDA provided financing for the
unsubsidised portion of the system costs from its
own funds. In case of SNAs channelizing MNRE’s
financial assistance, the IREDA financing was not
available to the end user. From 1993 -2000 the
programme was implemented mainly by IREDA,
using the NBFC intermediaries. The latter took
advantage of the availability of capital subsidies,
low cost financing and 100% depreciation in Year
1, in order to provide the end users the system
at a concessional rate. However, after 2000 the
programme was mainly implemented through
the SNAs. The SNAs were able to bring in a
component of subsidy from the respective state
Governments. The subsidies component received
through SNAs was reduced after the initial stage
from Rs. 135/Wp to Rs. 100/Wp.
Financial assistance available under the programme is
summarized below in Table 2:
24. 10
Potential for Solar PV Water Pumping for Irrigation in Bihar
Table 2: Financial Assistance for the MNRE Solar PV Water Pumping Programme
Financial Year(s) Subsidy Applicable Other facilities
1993-94 to 2000-01 Rs. 170/Wp, subject to a
maximum of 70% of the system
cost.
Soft loan for unsubsidized system cost
from IREDA at an interest of 2.5% p.a.
with a 10 year repayment period and 1
year moratorium.
2001-02 to 2002-03 Rs. 110/Wp, subject to a
maximum of Rs. 0.25 million or
90% of the system cost.
Soft loan at an interest of 5% p.a.
2003-04 to 2004-05* Rs. 75/Wp, subject to a maximum
of Rs. 0.2 million.
Soft loan at an interest of 5% p.a.
2005-06* Rs. 30/Wp, subject to a maximum
of Rs. 0.05million
Soft loan at an interest of 5% p.a.
* Applicable only for community drinking water projects
yy Private Sector Vendors: The programme
worked with nine empanelled vendors, namely
TATA Power Solar Systems Ltd., Bharat Heavy
Electricals Ltd., Central Electronics Ltd.,
Renewable Energy Systems Ltd., Sairam Solar
Systems, Udhaya Semiconductors Ltd., Polyene
General Industries Pvt. Ltd., Kirloskar Brothers
Ltd., Siemens Ltd.
yy Programme Results: In the first year, the
programme was considered as a demonstration
programme with a target of 1,000 Solar PV
pumping systems. However, less than 500 solar
PV water pumping systems were installed during
the first year of the programme. From 2004 the
programme was modified: it became applicable
only for community drinking water projects.
Solar PV water pumping for irrigation was no
longer applicable under the programme. As of
March 2012, 7,771 solar PV water pumping
systems had been installed against the targeted
50,000 systems.
State Wise Results: Under the MNRE
Programme, many SNAs installed solar water
pumping systems for agricultural purposes as
indicated in Table 3.
Table 3: PV pumps installed by different SNAs under the PV Water Pumping Programme
State Implementing Agency Pumps installed
Punjab Punjab Energy Development Agency (PEDA) 1,850
Karnataka Karnataka Renewable Energy Development Ltd. (KREDL) 700
Tamil Nadu Tamil Nadu Energy Development Agency (TEDA) 285
Chhattisgarh Chhattisgarh State Renewable Energy Development
Agency (CREDA)
130
Andhra Pradesh New and Renewable Energy Development Corporation of
Andhra Pradesh (NEDCAP)
70
Box 4: The Case of Punjab
The Punjab Energy Development Agency
(PEDA) facilitated the installation of 1,850
solar pumps in Punjab for agricultural
purposes. They used a mix of MNRE
subsidies, soft loans from IREDA, state
Government subsidy support and the 100%
depreciation benefit through lease financing
of the asset. This facilitated that farmers
could avail of the system at 10% of the
actual equipment cost.
25. 11
Potential for Solar PV Water Pumping for Irrigation in Bihar
5.2. Ongoing Programmes
2010-2017: Jawaharlal Nehru National Solar
Mission (JNNSM)
With the launch of the Jawaharlal Nehru National
Solar Mission (JNNSM) in 2010, the solar water
pumping programme of the MNRE was clubbed
with the off-grid and decentralised component of
the JNNSM. Key aspects of the programme are as
follows:
yy Objective: Commercialization of solar PV water
pumping systems.
yy Financial Support: Solar PV water pumping
systems are eligible for a financial support from
MNRE through a capital subsidy of 30%.
Currently, the financial assistance available is
30% subsidy subject to a benchmark price of Rs.
190 per peak watt (Wp).
yy Private Sector Vendors: The farmers are free
to procure systems from any of the empanelled
manufacturers that agreed to supply the pumps
as per the rate approved by the programme.
These include M/s. Topsun Energy Ltd.; M/s
Waaree Energies Pvt. Ltd.; M/s. Jain Irrigation
Systems Ltd.; and M/s. Rajasthan Electronics and
Instruments Ltd.
yy Results: Several states have taken up initiatives to
implement solar PV Water pumping programmes
using the financial assistance available under
JNNSM and funds from the respective state
Government budgets. The states of Gujarat,
Chhattisgarh, Uttar Pradesh, Maharashtra,
Tamil Nadu and Bihar have programmes in their
pipelines.
Box 5: The Case of Rajasthan - Rashtriya
Krishi Vikas Yojana (RKVY)
The RKVY is implemented by the Horticulture
Department of the Government of Rajasthan
covering 16 districts of the state. Beneficiaries
are expected to pay 14% of the system cost.
The Rajasthan Renewable Energy Corporation
is providing a 30% subsidy from MNRE under
JNNSM while the State Government under RKVY
is providing the remaining 56% subsidy
Under the 2011-12 programme, 1,600 number of
2,200 Wp and 3,000 Wpsolar PV water pumping
systems are proposed.
Solar Water Pumps Installed at Nalanda District of Bihar
Picture Courtesy: Claro Energy Pvt. Ltd.
26. 12
Potential for Solar PV Water Pumping for Irrigation in Bihar
Box 6: The case of Bihar- Bihar Saurkranti
Sinchai Yojana (BSSY):
The Bihar Renewable Energy Development
Agency (BREDA) is proposing to install 560
numbers of 1,800 Wp solar PV Water pumping
systems in 10 blocks of 5 districts of Bihar
during the current financial year, using
budgetary allocations of FY 2011-12 and
2012-13. Beneficiaries are expected to pay
10% of the system cost, with the balance 90%
being provided through JNNSM and by the
state government Diesel powered pump in rural Bihar
Picture Courtesy: Thomas Pullenkav
5.3. Activities of the Private Sector
Since most of the activities in the area of solar PV
water pumping systems for irrigation and drinking
water have revolved around the MNRE and other
Government funded/subsidised programmes, most
of the activities in this area by the private sector have
also been linked to these programmes. The strong
government promotion/subsidies have limited the
initiative of the private sector in the area to being
linked with the government programmes rather than
developing the market by themselves.
Box 7: Key players:
1. TATA Power Solar Systems Ltd. (formerly TATA BP Solar India Ltd.)
2. Topsun Energy Ltd. (also operates under the name of Vimal Electronics)
3. Waaree Energies Pvt. Ltd.
4. Jain Irrigation Systems Ltd.
5. Kirloskar Brothers Ltd.
6. VRG Energy India Pvt. Ltd.
7. Udhaya Semiconductors Ltd.
8. Photon Energy Systems Ltd.
9. Premier Solar Systems Pvt. Ltd.
10. Titan Energy Systems Ltd.
11. ICOMM Tele Ltd.
12. Sungrace Energy Solutions Pvt. Ltd.
13. Claro Energy Pvt. Ltd.
14. Atom Solar Systems
15. Rajasthan Electronics and Instruments Ltd.
16. Bharat Heavy Electricals Ltd.
17. Central Electronics Ltd.
27. 13
Potential for Solar PV Water Pumping for Irrigation in Bihar
5.4. Finance Mechanisms
The initial years of the MNRE solar PV water
pumping programme saw the systems being financed
through a complex scheme of subsidies, low cost
financing and tax benefits by utilising the 100%
accelerated depreciation available for renewable
energy technologies in the first year, to provide the
system to the end users at an affordable rate. However,
this financial engineering became redundant in the
late nineties when the accelerated depreciation was
reduced from 100% to 80% and the Income Tax
Department redefined the parameters for claiming
the accelerated depreciation.
Thereafter, all programmes for solar PV water
pumping have been financed mainly through capital
subsidies from MNRE and the State Governments.
Besides these subsidies, there are currently no specific
financing schemes for supporting the acquisition of
solar PV water pumping systems by the farmers.
5.5. Activities of Agricultural Universities
The academic community has so far played only a
small role in developing solar PV water pumping in
India. While there have been some studies conducted
by agricultural universities into the benefits of
solar water pumping for irrigation, in general,
the academia has not played a major role in the
development of the technology or its application in
agriculture.
5.6. Technology Development
Since most of the activities in the area of solar PV
water pumping systems for irrigation and drinking
water have revolved around the MNRE and other
Government funded/ subsidised programmes, the
specifications of the system, including capacity of the
pump and the size of the solar array were determined
by the programme design. Hence, there has not been
much innovation in this field by the private sector.
Technical specifications under MNRE
During the early days of solar PV water pumping
in India, the 900 Wp solar array with the 1HP
centrifugal DC mono-block surface pump was the
only approved specification. Later, falling water
tables and the need for larger quantities of water
for irrigation, as the pumps were mainly acquired
by large farmers who had large landholdings, led
to the addition of larger capacity surface pumps,
submersible pumps and large solar PV arrays. During
the second half of the MNRE solar PV water pumping
programme, the 1,800 Wp solar PV array with the
2HP centrifugal DC mono-block surface pump and
submersible pumps of 1 HP and 2 HP motors with
1200 Wp and 1800 Wp solar PV array respectively
were added to the list of approved pumps. Under
the JNNSM support for solar PV water pumping
systems, MNRE has broadly specified that the
capacity of solar PV array should be in the range of
200 Wp to 5,000 Wp and the capacity of the motor
pump set should be 1-5 HP. MNRE specifications
also allow the use of submersible pumps based on
the technical need of the particular case. The table 4
below provides the indicative technical specifications
provided by MNRE (please see Annexure 2 for full
details).
28. 14
Potential for Solar PV Water Pumping for Irrigation in Bihar
Table 4: MNRE Indicative Technical Specifications for Surface Pumps and Submersible Pumps
Description Model 1 Model 2 Model 3 Model 4
Centrifugal DC monoblock
Solar PV Array 900 Wp 1,800 Wp 2,700 Wp n/a
Motor Capacity 1 HP 2 HP 3 HP n/a
Max. TDH* 10 mtrs. 15 mtrs. 25 mtrs. n/a
Submersible motor with electronic controller
Solar PV Array 1,200 Wp 1,800 Wp 3,000 Wp 4,800 Wp
Motor Capacity 1 HP 1 HP / 2 HP 3 HP 4.6 HP
Max. TDH* 70 mtrs. 70 mtrs. 120 mtrs. 160 mtrs.
*Max. TDH – Maximum Total Dynamic Head
Solar pumping technology has been continuously
improving since the early 1980s. The typical solar
energy to hydraulic (pumped water) energy efficiency
was only 2% in 1980. Yet efficiency increased for PV
arrays from 6-8% to 12-14% and for motor pump
sets from 25% to 70% by using positive displacement
pumps with high pump and power conditioning).
Diaphragm pumps have an efficiency of around 45%
and centrifugal pumps of 20%.
5.7. Challenges and Barriers for Growth of Solar PV Water Pumping in
India
Many factors hamper the scaling up of the Indian
Solar PV water pumping market. Barriers can be
market and technology related as well as of regulatory
nature:
Market Related
yy Higher upfront capital cost for the farmers as
against to the low capital cost of conventional
pumps.
yy Lack of awareness about the technology and
the products among consumers and other
stakeholders (e.g. financial institutions).
yy Lack of relevant infrastructure support, i.e.
networks for market promotion and infrastructure
for after-sales service.
yy Danger of theft of solar modules/pumps.
Regulatory
yy Lack of market oriented policies.
yy Free/highly subsidised electric power supply for
agriculture.
yy Restrictions for innovative finance, i.e. accelerated
depreciation, carbon financing etc.
Technology Related
yy The ‘one-size-fits-all’ approach discourages
research and development (RD). Most
manufacturers fail to meet the specific needs of
the end user (the farmer) as their customers are
the SNAs and Government programmes.
yy Lack of standardisation and quality assurance
as most system integration efforts are led by
programme specifications rather than the end
user’s needs.
29. 15
Potential for Solar PV Water Pumping for Irrigation in Bihar
6. POTENTIAL FOR SOLAR IRRIGATION IN BIHAR
The utilization potential of solar PV water pumping
for irrigation in Bihar depends on several factors such
as availability of surface and ground water; resource
availability i.e. solar radiation; agricultural practices
and alternatives for powering of pump sets.
6.1. Surface and Ground Water Levels in Bihar
Analysing the ground water situation in Bihar (GoI
2011) shows that in most parts of Bihar the depth
to water level is 2-5 meters and ground water
potential is greater than 40 litres/second. The annual
replenishable ground water resource is 28.62 billion
cubic metres (bcm) while the annual ground water
draft, including the natural discharge during the
non-monsoon season, is only 13.77 bcm. Thus,
14.85 bcm of ground water is available for irrigation
and other uses.
An analysis of 269 wells across Bihar during the 2011
pre-monsoon period revealed that the depth to water
level ranged between 1.16-15 metres, with more
than 92% of the wells having water levels between
1-10 metres (GoI 2011).
A similar analysis of 192 wells across Bihar between
the 2010 and 2011 pre-monsoon period also revealed
that in 57.81% of the wells the annual fluctuation in
water levels resulted in a fall of water levels. Yet, in the
remaining 42.19% of wells, the annual fluctuation
resulted in a rise of water levels. The fall of the water
level ranged between 0.01 to 4.57 meters.
Figure 1: Bihar’s Groundwater Status
Source: Ground water year book 2011-12
30. 16
Potential for Solar PV Water Pumping for Irrigation in Bihar
Hydrogeologically, the main alluvial tract covers
entire north Bihar and a sizeable area in south of the
Ganga River. These alluvial formations constitute
prolific aquifers where the tube well can yield
between 1.2 to 2.5 lakh litres per hour. Even in the
hard rock areas of South Bihar, bore wells located
near the lineaments/fractures can yield between
10,000 to 50,000 litres per hour.
Box 8: Summary of the Potential for SPV Water Pumping for Irrigation in Bihar
Bihar, as a part of the Indo-Gangetic plains, is an area with extremely good potential for tapping
surface and ground water sources. Thus, prima facie the availability of surface and ground water in
Bihar clearly points to the suitability of the use of solar PV water pumping systems.
6.2. Solar Radiation in Bihar
The state of Bihar has about 280 - 300 sunny days
in a year. As per MNRE data, the state receives an
annual average solar radiation of 5.04–5.42 kWh/m2
(IMD 2009).
This is further corroborated by data from the NASA
website and IMD, whose figures of annual average
solar radiation is 4.88–5.27 kWh/m2 and 4.79
respectively. Thus, it can be concluded that the
average annual global solar radiation in the state
comes in the range of 4.79–5.42 kWh/ m2.
Data from the NASA website also shows that at an
equator pointed tilt angle of 25°, the average annual
radiation (22-year average) is 6.33 kWh/ m2. The
monthly averages are:
Table 5: Annual Radiation (AVG/M)
Month Radiation Month Radiation
Jan 6.34 Jul 4.81
Feb 7.42 Aug 5.24
Mar 7.73 Sep 5.29
Apr 7.43 Oct 6.52
May 6.79 Nov 6.54
Jun 5.78 Dec 6.16
Box 9: Summary of Solar Radiation in Bihar
Analysis of the monthly average radiation at the 25° tilt angle shows that the average monthly
radiation in Bihar is sufficient for the development of solar PV power projects. Further, solar PV water
pumping systems require energy mainly during the non-monsoon months. Since the periods of low
solar radiation in Bihar coincide with the availability of rainfall (June to September), the availability
of sufficient solar radiation to energise the solar PV pumping system is ensured.
31. 17
Potential for Solar PV Water Pumping for Irrigation in Bihar
6.3. Agriculture in Bihar
Bihar is primarily an agriculture based state with
88.7% of the population living in the rural areas
(GoB 2008). The agricultural land holding pattern
is characterized by an overwhelming majority of
marginal, small and semi-medium farms as shown in
Table 6. Almost 60% of all operational land holdings
are less than 2 hectares.
Table 6: Landholding in Bihar
Category of Farmers No. of Holdings Operational Holdings (Heotares)
Marginal (0-1Ha) 86,45,932 (82.9%) 27,87,789 (40.8%)
Small (1-2Ha) 10,05,650 (9.6%) 13,00,667 (19.0%)
Semi-medium (2-4Ha) 5,90,970 (5.7%) 15,82,279 (23.1%)
Medium (4-10Ha) 1,78,295 (1.7%) 9,75,355 (14.3%)
Source: Govt. of Bihar, Economic Survey, 2006-07, March 2007, p.13
The agriculture operations in Bihar are divided
into two main crop seasons – the Kharif and the
Rabi. The Kharif (monsoon) season is from July to
October. The Rabi (winter) season is from October
to March. The main Kharif crops are paddy, maize,
pulses and oilseeds. The main Rabi crops are
wheat, maize, pulses, oilseeds and vegetables. With
irrigation, a third crop of paddy, maize or vegetables
can also be grown between March and June (summer
crop locally called garma).
While the Kharif crop is mainly rain fed, the Rabi
and the summer crop require irrigation. Currently,
irrigation is mostly dependent on diesel operated
tube wells. The high operational cost of diesel engine
pump sets forces farmers to practice deficit irrigation
of crops. As a result, the yields of all crops are much
lower than their potential.
Agriculture in the State is prone to natural calamity.
Bihar’s Northern districts are affected by recurrent
floods. The Southern districts are prone to lack of
rainfall. Almost 41% of the geographical area of the
State is flood prone. On the other hand, 40% of the
geographical area of South Bihar is drought prone.
Agro-climatically, the state has three distinct
zones. The details of the soil condition and rainfall
in these zones have been given in Table 7.The soil in
the state is fertile with rich soil cover, mainly alluvial
with medium nitrogen, phosphorus and potassium
(NPK) content. The state is also very rich in water
resources with adequate rainfall all over, a network of
perennial and semi-perennial rivers, and a sufficient
supply of ground water at low depth.
Source: http://krishi.bih.nic.in
Map 3: Agro-Climatic Zones of Bihar
32. 18
Potential for Solar PV Water Pumping for Irrigation in Bihar
Table 7: Agriculture in Bihar
Agro-Climatic
Zone
Zone –I
North West
Alluvial Plains
Zone - II
North East
Alluvial Plains
Zone - III
South Bihar
Alluvial Plains
Districts Bettiah, Siwan, Motihari,
Seohar, Gopalganj,
Vaishali, Muzaffarpur,
Samastipur, Madhubani,
Dar-bhanga, West East
Champaran
Purnea, Katihar, Saharsa,
Madhepura, Araria,
Kishanganj, Supaul,
Khagaria, Begusarai
Patna, Gaya, Buxar,
Kaimur, Jehanabad,
Nawada, Munger,
Bhagalpur Jamui,
Nalanda, Rohtas, Bhojpur,
Banka, Aurangabad,
Lakhisarai, Shekhpura
Area Cultivated
(Ha)
Net: 2,281,000
Gross: 3,260,000
Net: 1,147,000
Gross: 1,677,000
Net: 241,000
Gross: 3,408,000
Average Rainfall
(mm)
1234.7 1382.2 1102.1
Soil and
Topography
Medium acidic, heavy
textured, sandy loam
to clayed, flood prone.
(Large area remains
under water called
Chaur, Maun Tal lands)
Light to medium textured,
slightly acidic, sandy to
silty loam (large area
comprise of Tal and Diara
lands)
Old alluvium to sandy
loam.
Main Crops Rice, Wheat, Maize,
Arhar
Hort. Crops: Litchi,
Mango, Makhana, Water,
Chestnut.
Maize, Mustard, Jute,
Sugarcane
Hort. Crops: Mango, Bel,
Banana, Papaya, Cucurbit,
Chilly, Turmeric, Potato
Rice, Gram, Wheat
Hort. Crops: Mango,
Guava, Banana, Bael,
Jackfruit, Onion, Potato,
Chillies, Marigold
Source:http://krishi.bih.nic.in
The issue of tenancy and antiquated land records
has been a continuous bane on agriculture in
Bihar. Though the reported incidence of tenancy
as per the secondary sources in the state is very low,
the actual incidences compound to be close to 40%.
According to a survey conducted by the Institute for
Human Development (IHD) in 1999-2000, about
36% of all rural households and about half of the
cultivating households leased in land and about one-
fourth of the cultivated land was tenanted land. An
overwhelmingly large percentage of the landless and
marginal-small landholders leased land.
6.4. Requirement of Water for Major Crops of Bihar
Paddy, wheat, maize and sugarcane are some of the
major crops cultivated in Bihar. The growing period
and the water requirement varies from crop to crop.
The requirement of irrigation and the total growing
period for the major crops in Bihar are mentioned
below:
Table 8: Irrigation Requirement and Growing Period for Major Crops of Bihar
Crop Growing Period Water requirement No. of Irrigations currently done
Paddy 130-150 days 900–1,500mm 6-7
Wheat 120 -150 days 450-650mm 4-6
Maize 100 days 500-800mm 3-6
Sugarcane 365 - 500 days 1500-2,500mm 8-12
Source: Discussions with agriculturists and ICAR Scientists
33. 19
Potential for Solar PV Water Pumping for Irrigation in Bihar
6.5. Availability of Power
The power availability scenario in Bihar in the year
2000 (post bifurcation) became significantly critical,
as several power generation plants fell within the
newly created State of Jharkhand. Currently, Bihar’s
power system has a peak of about 1,500 MW under
the constrained demand scenario, whereas, the
availability is about 950 MW (GoB 2012). As per
the Central Electricity Authority’s Anticipated Power
Supply Position in the Country during 2012-13,
Bihar will have an energy deficit of 20.2% energy
deficit and a peak deficit of 31% i.e. 774MW during
2012-13. The situation leads to wide-scale rationing
of power to all categories of consumers. The current
power availability barely covers 50% of the villages
with only 16.4% of households in the state having
access to electricity as per the 2011 census. Of the
current demand, approximately 32.5% of the power
within the state is utilised for irrigation.
6.6. Existing Stakeholders in the Solar PV Water Pumping Sector
There has been very limited activity in the solar PV
water pumping sector in Bihar. The few solar PV
pumping systems that were installed under the Solar
PV Water Pumping Programme of MNRE, were
installed by suppliers like TATA Power Solar India
Ltd. (formerly known as TATA BP Solar India Ltd.).
Recently, in 2011, a company called Claro Energy
Private Ltd. (Claro) has set up operations in Bihar
in this sector. Claro Energy has installed around 70
solar PV water pumping systems, with 34 systems
being installed in collaboration with the Minor
Water Resources Department as replacement for
the DG sets that are currently being used to power
irrigation pump sets.
Another recent development in the field of solar PV
water pumping in Bihar has been the installation
of three demonstration solar PV water pumping
systems in Bihar by Greenpeace, the environmental
NGO. These solar pumps are manufactured by Atom
Solar Systems have been installed by Greenpeace
with support from the Indian Grameen Services. The
demonstrations were done by Greenpeace to prove
that solar PV water pumping systems can provide a
cost-effective alternative to diesel/ electricity based
irrigation pump sets.
In addition to Claro Energy, Atom Solar and TATA
Power Solar Systems Limited, other private sector
players active in the sector include SELCO, Solar
Light Private Ltd and Dudwa Power Industries,
Patna who reportedly are interested in developing a
product line around solar PV water pumping. Others
like Gautam Polymers, Kirti Solar from Kolkata,
Minda New Gen Tech Ltd. of the Minda Group and
the Jain Irrigation Systems Ltd. are companies that
have adopted a watch and wait approach and could
become potentially large players in the solar PV
water pumping market in Bihar. More details about
the activities of Claro Energy Private Ltd., Atom
Solar Systems and Jain Irrigation Systems Ltd. are
mentioned in Annexure 6.
6.7. Potential for Solar PV Water Pumping in Bihar
Solar PV water pumping for irrigation is a suitable
option for Bihar: The ample availability of surface
and ground water in Bihar (even with ground water
levels in North Bihar are at a much higher level
than that in the South Bihar), the land holding
pattern and agricultural practices, coupled with the
availability of sufficient solar radiation are conducive
for solar PV water pumping. Moreover, solar PV
water pumping also constitutes an option to address
the principal constraint of electricity for irrigation to
ensure agricultural growth to its full potential.
34. 20
Potential for Solar PV Water Pumping for Irrigation in Bihar
Box 10: Bihar’s estimated solar PV water pumping potential
The WISE report “Renewable Energy Potential Assessment and Renewable Energy Action Plan for
Bihar” has estimated the potential for solar PV water pumping to be 2,665 MWp over the next
10 years i.e. upto 2021-22. This is assessment is based on net irrigated area in the state and an
assumption that a solar array of 0.6 kWp is required to power a SPV pump that can irrigate 1 ha of
land. HWWI in their study of the CDM Potential of SPV Pumps in India has estimated a potential of
11 million solar
Solar Pump combined with drip irrigation installed near Pune
Picture Courtesy: Atom Solar Systems
35. 21
Potential for Solar PV Water Pumping for Irrigation in Bihar
7. NEEDS ASSESSMENT
To implement a solar PV water pumping programme
in Bihar, there are many barriers – regulatory, market-
and technology related – that need to be overcome.
The below section lists the key barriers identified
in this study and provides potential solutions to
the same as discussed and verified in the workshop
conducted in Patna in November 2012.
7.1. Market Related Barriers and Potential Solutions
Current Barriers/Obstacles Potential Corrective Measures
High Upfront Cost
Solar PV is a competitive option in the face of
increasing diesel prices Yet, it requires the farmers
to incur a high upfront cost when compared to the
much lower capital cost of conventional pumps.
Moreover, diesel pumps are available on rent,
reducing the investment cost even further.
Subsidies/Innovative Finance
Solar PV water pumping systems’ adoption is
depending on the ease of access to subsidies and/or
mechanisms to bring the costs of acquiring solar PV
water pumps at par with the costs of conventional
pumps. Subsidy should be based on the market
price (not benchmark price), and the time lag
between installation and release of subsidy should be
minimised. MNRE should include solar PV water
pumping systems along with other off-grid systems
for which subsidies are offered through NABARD
and the banking sector.
Leasing Mechanisms
Leasing out solar PV systems facilitates in developing
a new revenue stream and is also suitable for small-
scale agricultural practices.
Lack of Finance Mechanisms
Lack of suitable finance mechanisms for end user
and also for business finance.
Innovative Consumer/ Business Finance
Need for a well-designed loan product at reasonable
rates of interest and repayments linked to savings
from diesel/ income from selling of crops; smart
business finance for Small and Medium Enterprise
(SMEs) to facilitate the entry of multiple players in
this sector.
Low Awareness Among Consumers and Other
Relevant Stakeholders
Often farmers are not even aware about the existence
of a solar powered option for irrigation or perceive
them to be very expensive and hence, there is low
demand for the solar water pumps.
Awareness Campaigns
Inform farmers, financial institutions and other
stakeholders about solar PV being a competitive
option and its benefits vis-a-vis diesel powered
irrigation pump sets.
36. 22
Potential for Solar PV Water Pumping for Irrigation in Bihar
Current Barriers/Obstacles Potential Corrective Measures
Lack of Maintenance and Support
Lack of support infrastructure and maintenance that
would be required for the large-scale deployment of
solar PV water pumping systems.
Localised Service Infrastructure
Market promotion and improved local after-sales
infrastructure (training of existing local pump
technicians/sales outlets) to build confidence among
farmers and financial institutions.
Lack of Market Intelligence and Information
Private sector companies are often not aware about
the market potentials for solar water pumps in Bihar.
Currently all market intelligence is very generic and
does not provide specific information about the
demand and need of the market.
Provision of Adequate Resources/ Market Data
Adequate resources and market intelligence data
is required to motivate investment choices of the
many ‘watching and waiting’ companies to actually
invest in building the sales and service infrastructure
in Bihar.
Danger of Theft
Solar PV water pumping systems are installed
outdoors, distant to the farmers’ houses, making
theft an issue.
Portable/Community Owned Systems and Insur-
ance
Portable and/or community owned systems as well
as an insurance mechanism can facilitate mitigation
of the risk.
A portable solar module
Picture Courtesy: Atom Solar
7.2. Regulatory Issues and Potential Solutions
Regulatory Issues
Current Barriers/Obstacles Potential Corrective Measures
Restricted Financial Engineering
Accelerated depreciation, carbon financing, and
other fiscal benefits for renewable energy were
offered to promote its deployment. However,
many restrictions in this regard make the offerings
redundant.
Innovative Policies and Financial Engineering
Policies, regulations and procedures are required
to help the private sector innovate financially and
thereby, reduce costs.
37. 23
Potential for Solar PV Water Pumping for Irrigation in Bihar
Current Barriers/Obstacles Potential Corrective Measures
Lack of Market Oriented Policies
Bihar lacks an adequate policy and regulatory
framework that encourages renewable energy
application in general and solar PV water pumping
in particular.
Policies for a Level Playing Field
Policies, regulations and procedures are required
to create a level playing field for solar PV water
pumping vis-à-vis conventional irrigation systems
(electricity/diesel powered pump sets).
Maze of Government Departments
Lack of a ‘single-window’ approach for solar PV
water pumping is one of the key challenges. While
renewable energy is the domain of the energy
department and the Bihar Renewable Energy
Development Agency (BREDA), small scale
irrigation is taken care of by the Minor Water
Resources Department; agricultural extension
work is handled by the Agriculture Department;
cooperative banks come under the Cooperative
Department. Hence there are different departments
within the state government looking at the solar
water pump from multiple angles.
Single-Window’ Approach
For solar PV water pumping to be promoted
on a large-scale, a ‘single window’ led by a joint
‘mission’ is required. All the different ministries and
departments need to have a unified approach to
cover the different aspects of bringing the solar PV
water pumping system to the farmer.
Concealed Tenancy and Small Landholdings
Tenancy and small land holdings come in the way
of efficient agricultural management. Tenancy laws
in Bihar have either banned tenancy completely or
have imposed such restrictive conditions that leasing
out of the land was rendered virtually impossible.
This has paved the way for concealed tenancy, where
neither the landlord nor the tenant benefit. This
insecurity does not allow long-term planning for
land development and impedes small farmers from
entering into contract farming agreements to build
economies of scale.
Tenancy Reform
Agricultural management including the deployment
of solar PV water pumping systems will immensely
benefit from tenancy reforms.
Leasing Mechanisms
Leasing out solar PV water pumping systems will
allow tapping into the market even for a short
period and small-scale agricultural practices.
Group Investments
Designing a water pumping model which can be
owned by a women self-help-group (SHG) or a
joint liability group (JLG) (which is recognized by
the banks).
38. 24
Potential for Solar PV Water Pumping for Irrigation in Bihar
Pump installed under MNRE Solar Water Pumping Programme,DadriMajra Village, Punjab
Picture Courtesy: Thomas Pullenkav
7.3. Technology Related Barriers and Potential Solutions
Current Barriers/Obstacles Potential Corrective Measures
Lack of Standardisation and Quality Assurance
The current ‘one size fits all’ approach for solar
PV water pumping systems for irrigation does not
provide the right mix between customisation and
standardisation required for large-scale deployment.
Standardised Products that Cater to the Local
Needs
Technology providers need to standardise products
to minimize failures. Yet, they also need to offer
different types and sizes to cater to the different
market segments of farmers (surface and submersible
pumps, etc.).
Lack of Manufacturers
There is a lack of (Brushless Direct Current) BLDC
solar pump manufacturers in the country. Presently
all solar BLDC pumps used in the country are
imported, which increases the cost of the pumps and
making operation and maintenance a big challenge.
Promotion of Local Manufacturing
To decrease cost and enhance post sales services,
locally manufactured BLDC motors need to be
promoted.
39. 25
Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 1: ECONOMICS OF SOLAR PV WATER PUMPING
VIS-A-VIS DIESEL POWERED WATER PUMPING SYSTEMS
With the cost of solar PV falling steadily and the
price of diesel soaring, solar PV water pumping has
emerged as an economically feasible idea. The table
below shows a very basic analysis of the economics
of a 1 HP pump powered by a 2kVA DG set vis-a-vis
an equivalent solar PV water pumping system (both
capable of irrigating 1ha of land).
Table 9: 1 HP Pump Powered by a 2kVA DG Set vis-as-vis a Solar PV Water Pumping System
Assumptions
Cost of 1 HP diesel powered pump set Rs. 25,000.00
Cost of equivalent Solar PV water pump (unsubsidized) Rs. 2,00,000.00
No. of operating hours per year (200 days x 5 hours/day) 1,000 hours
Cost of diesel/litre Rs. 50.00
Fuel consumption/hr. Of 2kVA DG set 0.75 litres
Average increase in fuel prices per annum 5%
Maintenance cost/year for diesel pump Rs. 2,000.00
Maintenance cost/year for solar pump Rs. 500.00
Life cycle period (in years) 10 years
Discount rate 10%
Table 10: Comparison of 10 years of Life Cycle Cost
Capital Cost Net Present Main-
tenance Cost
Net Present Fuel
Cost
Total
SPV Pump 200,000 3,072 Nil 203,072
Diesel Pump 25,000 12,289 278,993 316,282
When compared to diesel powered pumping systems,
the cost of solar PV water pumping system without
any subsidy works out to be 64.2% of the cost of the
diesel pump, over a life cycle of ten years.
Based on the above assumptions, it is also seen that a
farmer investing in a solar PV water pumping system
can pay back the cost of the solar PV water pumping
system from his savings on diesel in approximately
4 years’ time. If the existing subsidy for solar PV
water pumping systems under JNNSM is taken into
account, this will come down to less than 3 years.
Various other studies have also shown the economic
feasibility of solar PV water pumping systems over
diesel pumps. C-STEP in their Harnessing Solar
Energy – Options for India report have estimated the
cost per kWh for solar PV water pumps and diesel
powered pump sets as shown below:
40. 26
Potential for Solar PV Water Pumping for Irrigation in Bihar
Table 11: Cost Comparison at kWh level between Diesel and Solar PV Pump of 1 HP Rating
Capital Cost Operating Cost/
year
Net Present Cost Cost/kWh
SPV Pump 259,702#
1,500 293,793 Rs. 8.60
Diesel Pump* 25,000 24,187 471.575 Rs. 13.90
* Diesel at Rs. 50/litre.
#
The price of the solar PV pump in this table is replicated from the CSTEP report. If the price of the Solar PV pump is
assumed to be Rs. 200000, the cost at kWh becomes even lower.
As per the C-STEP report, when compared to diesel
generators, solar PV pumps worked out to almost
half the cost over a life cycle of twenty-five years,
even at unsubsidised rates.
The Solar Electric Light Fund (SELF) in 2008 used
the NREL HOMER (Hybrid Optimization Model
for Electric Renewables) model to choose a pumping
system designed to pump 5,000 gallons per day from
a TDH of around 100 feet. It compared a solar array
of 1,900 Wp against a 4 kW diesel generator. Both
powered an equivalent pump of approximately 1
horsepower. SELF deduced from the simulation that
in the worst case scenario for solar, the solar option is
one fourth the net present cost of the diesel option.
The Desert Research Foundation of Namibia in a
study commissioned by Bernt Lorentz GmbH Co.
KG in 2008 calculated that the actual all inclusive
cost over 20 years is US$ 12,750 for a solar pump
and US$ 73,750 for a diesel pump (at a diesel price
of US$ 1.30/ltr). With the increased diesel prices
and the steadily falling PV prices, this scenario is
currently all the more favourable for solar PV water
pumping for irrigation.
41. 27
Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 2: JNNSM TECHNICAL SPECIFICATIONS FOR SOLAR PV
WATER PUMPING SYSTEMS
I. Definition
A solar photovoltaic (SPV)water pumping system
consists of a PV array, a DC/AC surface mounted/
submersible/floating motor pump set, electronics,
if any, interconnect cables and an “On-Off” switch.
PV Array is mounted on a suitable structure with
a provision of tracking. Electronics could include
Maximum Power Point Tracker (MPPT), Inverter
and Controls/Protections. Storage batteries will not
constitute a part of the SPV Water Pumping System.
Components and parts used in the SPV water
pumping system including the PV modules, pumps,
metallic structures, cables, junction box, switch,
etc. should conform to the BIS/ IEC/international
specifications, wherever such specifications are
available and applicable.
II. Performance Specifications and Requirements (Duty Cycle)
The Solar PV Water Pumping System should provide
a minimum of 85 litres of water per watt peak of PV
array used per day under average daily solar radiation
conditions of 5.5 KWh/m2 on a horizontal surface,
from a total head of 10 metres (suction head up to a
maximum of 7 metres).
For Deep Well Pumps, the water discharge should be
a minimum of 28 litres of water per watt peak of PV
array capacity used per day from a total head of 30
metres. In case of High Head, Deep Well Pumps, the
water discharge should be a minimum of 17 litres of
water per watt peak of PV array capacity used per
day from a total head of 50 metres.
Use of a tracking system to enhance the availability
of solar radiation to lift desired quantity of water
is desirable. It should be specified whether the
minimum water output is achieved directly or
through tracking of PV Array. The actual duration
of pumping of water on a particular day and the
quantity of water pumped could vary depending on
the location, season, etc.
III. PV Array
The SPV water pumping system should be operated
with a PV array capacity in the range of 200 Watts
peak (Wp) to 5,000 Wp, measured under STC.
Sufficient number of modules in series and parallel
could be used to obtain the required PV array power
output. The power output of individual PV modules
used in the PV array, under STC, should be a
minimum of 74 Watts peak, with adequate provision
for measurement tolerances. Use of PV modules
with higher power output is preferred. Indigenously
produced PV module(s) containing mono/multi
crystalline silicon solar cells with following features
should be used in the PV array for the SPV water
pumping systems:
yy Modules supplied with the SPV water pumping
systems should have certificate as per IEC 61215
specifications or equivalent national/international
standards.
yy Modules must qualify to IEC 61730 Part I and II
for safety qualification testing.
yy The efficiency of the PV modules should be
minimum 13% and fill factor should be more
than 70%.
42. 28
Potential for Solar PV Water Pumping for Irrigation in Bihar
yy The terminal box on the module should have a
provision for “Opening” for replacing the cable,
if required.
yy Each PV module must use a RF identification
tag (RFID), which must contain the following
information:
i Name of the manufacturer of PV module
ii Model or type number
iii Serial number
iv Month and year of the manufacture
v I-V curve for the module
vi Peak wattage of the module at 16.4 volts
vii Im, Vm and FF for the module
viii Unique serial no. and model no. of the module
Until March 2013, the RFID can be inside or outside
the module laminate but must be able to withstand
harsh environmental conditions. However, from 1st
April 2013 onwards, RFID shall be mandatorily
placed inside the module laminate. A distinctive
serial number starting with NSM will be engraved
on the frame of the module or screen printed on the
tedlar sheet of the module.
IV. Motor Pump-Set
Following types of motor pump sets could be used in
the SPV water pumping systems:
i Surface mounted DC motor pump-set
ii Submersible DC motor pump set
iii Submersible AC motor pump set
iv Floating DC motor pump set
v Any other motor pump set after approval from
Test Centres of the Ministry.
The “Motor Pump Set” should have the following
features:
yy The mono block DC/AC centrifugal motor
pump set has its driving unit and impeller
mounted on a common shaft, thereby giving it a
perfect alignment. The pump should be provided
with specially developed mechanical seals, which
ensure zero leakage.
yy The motor is of 1-5 HP having spring loaded
carbon brushes in case of DC motor pump sets.
The suction and delivery head will depend on the
site specific condition of the field.
yy Submersible pumps could also be used according
to the technical need of the particular case.
yy The suction/delivery pipe (GI/HDPE), electric
cables, floating assembly, civil work and other
fittings required to install the system.
yy The following details should be marked indelibly
on the motor pump set
a Name of the manufacturer or distinctive logo
b Model number
c Serial number
V. Mounting Structures and Tracking System
To enhance the performance of SPV water pumping
systems, it is desirable to use a tracking system.
Manual, passive and auto tracking are permitted. The
PV modules will be mounted on metallic structures
of adequate strength and appropriate design, which
can withstand load of modules and high wind
velocities up to 150 km per hour. The support
structure used in the pumping system will be hot dip
galvanized iron (G.I).
Facilities to be provided in the structure:
yy Seasonal tilt angle adjustment and
yy Three times manual tracking in a day
The G.I. structures for mounting the solar panels
could be designed as such that these can be
manually/auto adjusted for optimal tilt throughout
the year. A simple provision is to be provided so that
the panel can be manually adjusted three times a day
43. 29
Potential for Solar PV Water Pumping for Irrigation in Bihar
(East-South-West) to face the sun optimally. This
adjustment could be done in the early morning, noon
time and afternoon to increase the total input solar
radiation on the solar panel surface substantially. This
provision helps the motor pump set to start early in
the morning and function efficiently till late in the
afternoon, thereby, increasing the total output of the
pumping system.
The “Mounting Structure” should have the following
features:
yy The modules support structure shall be mild steel,
hot dipped galvanized (120 micron) iron for
holding the PV modules. The size of angle iron
should not be less than 50x50x5 mm.
yy Each panel frame structure shall be fabricated to
be grouted on ground or roof on its legs. It will
withstand severe cyclone/storm with speed of 150
km/hr.
yy Each panel frame structure shall have provision
to adjust its angle of inclination to the horizontal
between 10 to 40 degrees with a step of 10
degree, so that the inclination can be adjusted at
the specified tilt angle whenever required.
yy Each panel frame shall be complete with a
weatherproof junction box as per the relevant BIS
specifications, where the module terminals shall
be interconnected and output taken.
yy All nuts and bolts should be of very good quality
and should be corrosion resistant.
yy The structure should be designed to allow easy
replacement of any module.
yy The array structure shall be so designed that it
will occupy minimum space without sacrificing
the output from the SPV panels.
VI. Electronics and Protections
yy Use of Maximum Power Point Tracker (MPPT) is
encouraged to optimally use the solar panel and
maximize the water discharge.
yy Inverter could be used, if required, to operate an
AC Pump.
yy Adequate protections should be incorporated
against dry operation of motor pump set,
lightning, hails and storms. Full protection
against open circuit, accidental short circuit and
reverse polarity should be provided.
VII. On/Off Switch
A good reliable switch suitable for DC/AC use
is to be provided with the motor pump set with a
sufficiently long cable to connection the PV array
and the motor pump set.
VIII. O/M Manual
An Operation and Maintenance Manual, in English
and the local language, should be provided with the
solar PV pumping system. The following minimum
details must be provided in the manual:
1 About photovoltaics
2 About solar pump
3 About PV module
4 About motor pump set
5 About tracking system
6 Clear instructions about mounting of PV module.
7 About electronics used in AC motor pump sets,
if any
8 DO’s and DONT’s
9 Clear instructions on regular maintenance/
trouble shooting of the pumping system
10 Name and address of the person or centre to be
contacted in case of failure or complaint
44. 30
Potential for Solar PV Water Pumping for Irrigation in Bihar
IX. Indicative Technical Specifications
General Information
This information is indicative only and the designer
must satisfy himself regarding quantity and
quality wise supply of Solar Modules/Panel, Solar
Photovoltaic (SPV) Pump, and GI support structure
as well as all aspects of commissioning of solar
infrastructural facility. The scope of work includes
supply, installation and commissioning of Solar PV
Water Pumps on bore-well of minimum 4” diameter
(to be provided by the user) at various sites as per the
technical specification mentioned below. The whole
system including submersible/surface pumps shall
be warranted for 5 years. The PV Modules must be
warranted for output wattage, which should not be
less than 90% at the end of 10 years and 80% at the
end of 25 years.
Table 12: Technical Specifications of Solar Shallow Well Pumping Systems
Description Model-I Model-II Model-III
Solar PV array 900 Wp 1,800 Wp 2,700 Wp
Motor pump set type Centrifugal DC
monoblock
Centrifugal DC
monoblock
Centrifugal DC
monoblock
Motor capacity 1 HP 2 HP 3 HP
Operating voltage 60 V DC (nominal) 60 V DC (nominal) 90 V DC (nominal)
Max. Suction Head 7 metres 7 metres 7 metres
Max. total dynamic head 10 metres 15 metres 25 metres
Module mounting
structure
MS hot dipped
galvanised, three
times manual tracking
facilities
MS hot dipped
galvanised, three
times manual tracking
facilities
MS hot dipped
galvanised, three
times manual tracking
facilities
Shadow free area 30 sq. metres 75 sq. metres 120 sq. metres
Water Output * 77,000 LPD from a
TDH of 10 metres
154,000 LPDfrom TDH
of 10 metres
115,000 LPD from TDH
of 20 metres
* Water output figures are on a clear sunny day with three times tracking of SPV panel when solar radiation on horizontal
surface is 5.5 kWh/sq.m/day
Table 13: Technical Specifications of Solar Deep Well Pumping Systems
Description Model I Model II Model III Model IV
Solar PV array 1,200 Wp 1,800 Wp 3,000 Wp 4,800 Wp
Motor pump set
type
Submersible
with electronic
controller
Submersible
with electronic
controller
Submersible
with electronic
controller
Submersible
with electronic
controller
Motor capacity 1 HP 1 HP / 2 HP 3 HP 4.6 HP
45. 31
Potential for Solar PV Water Pumping for Irrigation in Bihar
Max. total
dynamic head
70 metres 70 metres 120 metres 160 metres
Module mounting
structure
MS hot dipped
galvanised, three
times manual
tracking facilities
MS hot dipped
galvanised, three
times manual
tracking facilities
MS hot dipped
galvanised, three
times manual
tracking facilities
MS hot dipped
galvanised, three
times manual
tracking facilities
Shadow free area 45 Sq. metres 75 sq. metres 120 sq. metres 200 sq. metres
Water Output * 34,000 LPD from
a TDH of 30 mtrs.
51,000 LPD from
a TDH of 30 mtrs.
51,000 LPD from
TDH of 50 mtrs.
82,000 LPD from
TDH of 50 mtrs.
* Water output figures are on a clear sunny day with three times tracking of SPV panel when solar radiation on horizontal
surface is 5.5 kWh/sq.m/day
46. 32
Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 3: CHECK LIST / GUIDE FOR INTERVIEWS AND EXPERT
CONSULTATIONS
Questions for Existing Users of Solar PV Pumps/SNAs/ Organizations with
activities in the area of solar PV water pumping
1 What has been the experience of using solar PV
water pumping systems for irrigation?
2 What were the challenges to rolling out the
programme/acquiring and using the solar PV
water pumping system?
3 In hindsight, what facilitated and hampered the
programme implementation/acquiring and using
the solar PV water pumping system? (Get detailed
responses for each of the areas viz., technological
maturity, access to finance, capacity building and
regulatory issues).
Questions for BREDA/Line Depts./Organizations proposing activities in the
area of solar PV water pumping in Bihar
1 What are the challenges and opportunities to
rolling out of SPV Pumps in Bihar?
2 What are the barriers that need to be addressed
to enable the scaling of the sector? (Get detailed
responses for each of the areas viz., technological
maturity, access to finance, capacity building and
regulatory issues).
3 What is expectation that the private sector has
from BREDA and other Govt. Depts. that are
involved promoting RE and irrigation? What is
missing? What are steps that need to be taken by
the policy makers?
4 What are the expectations from the private
sector? What is missing? What are steps that need
to be taken by the technology providers to ensure
scaling of the sector?
5 What external programmatic support would help
support the scaling up of the rolling out of SPV
Pumps in Bihar?
47. 33
Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 4: STAKEHOLDER WORKSHOP
A stakeholder workshop was organised in Patna on
9th November 2012, wherein the findings of the
study was presented to different stakeholders from
the Government, financial institutions, private sector
organisations dealing in solar equipment and/or solar
PV water pumping systems, farmers’ organisations
and civil society.
Mr. Manish Kumar IAS, Director BREDA at the Stakeholder workshop
Picture Courtesy: GIZ
The presentation was followed by discussions on
the challenges and opportunities identified by the
initial study and validation of the findings based on
the actual field experience of the stakeholders. The
discussions were followed up with a break out session,
breaking up the stakeholders into two groups.
The first breakout group consisted of BREDA, the
line departments and the financial institutions. This
group discussed the challenges and opportunities
from the policy makers in rolling out of solar
technology based water pumps. Feedback from the
first breakout group was as follows:
Issues Relating to the Technology
yy Standardization of the solar water pumps in
an important issue. There are debates around
the best parameters/indicators for assessing the
efficiency of the pumps. The official tendering
process should have a balance between the size/
power of the technology along with the output
potentials from the pumps.
yy The solar water pump needs to be integrated with
the existing diesel/grid based pumps. At present
there is a mismatch between the output from the
existing pumps and the solar water pumps. There
needs to a technical assessment conducted on the
efficiency of the pumps by a suitable department
(most probably by BREDA) and the results
should be available in the public domain. It is
important to determine the high quality pumps
existing within the market. Awareness generation
regarding the same will be very important.
yy Water level varies across the state of Bihar. While
the North Bihar has a comparatively higher water
table, the South of Bihar has lower water levels.
Hence it would be unjustified to classify the
water table in a uniform manner. This also takes
us to look at different technologies of surface and
submersible pumps in different locations. The
size and capacity of the pumps would also vary
accordingly.
48. 34
Potential for Solar PV Water Pumping for Irrigation in Bihar
Issues relating to Finance
yy There is often a mismatch between the available
benchmark price set by the government/regulators
and the market price for the product. This often
leads to confusion between the end user and the
financial institutions. The end user feels that that
the subsidy should be as per the market price
but actually it is based on the benchmark price
leading to lack of trust between service providers
and end users.
yy There is often a substantial time lag between
launching of the programme and releasing of
the subsidy. This often leads to uncomfortable
situation for the beneficiary and often increases
the interest burden for him/her.
Other Issues
yy Necessary innovations need to be mainstreamed
along with the solar water pumps based on the
water tables, capacity of the pump and the
topography. For example creation of water
structures for storing of water may be necessary
in some parts to make solar water pumps work
successfully.
yy 60% of the farmers own land that is less than
2 bighas. There are lots of small and medium
farmers in the state of Bihar. Representatives from
Jeevika were keen to try out a water pumping
model which can be owned by a SHG or a
joint liability group (JLG) (which is recognized
by the banks). The minor irrigation is going to
have a pilot project and there are potentials for
collaboration.
A cross-section of the participants at the stakeholder workshop
Picture Courtesy: GIZ
The second breakout group consisted of the private
sector companies, farmers’ organisations and civil
society. They discussed issues regarding technological
maturity, access to finance, capacity building and
regulatory issues in rolling out of solar technology
based water pumps. Feedback from the second
breakout group was as follows:
Issues relating to the Technology
yy While standardization of the solar water pumps
is important, the product should be suited to
customer need. Different types of pumps required
to meet different needs.
yy There are no local suppliers for good quality,
efficient pumps. All BLDC pumps need to be
imported, thereby, increasing costs and making
them difficult to service locally.
yy Lack of localised service creating problems for
technology suppliers. Localised infrastructure
is required. Training for existing local pump
technicians and sales outlets should be
undertaken.
yy Pumps are being rated on SPV array capacity.
Output/discharge of the pump should be the
main criteria for pump evaluation, as ultimately
the farmer is buying the pump for water.
49. 35
Potential for Solar PV Water Pumping for Irrigation in Bihar
yy Ensure better value from solar PV water pumping
system by linking with drip irrigation and rural
electrification.
Issues relating to Finance
yy Affordability is the biggest issue with regard
to solar water pumping. Need for consumer
financing that is similar to costs being incurred
for owning and using diesel pumps. The use of
accelerated depreciation, carbon financing, etc. to
reduce costs should be looked into.
yy Clarity is required regarding delivery of subsidy.
If subsidy is going to be released in lots (bundling
of systems) as done in the case of large systems
under JNNSM, it will not be possible for
suppliers to bear the burden of the increased costs
due to increase in interest burden. Subsidy should
be done on individual basis and the time lag
between installation and release of subsidy should
be minimised. MNRE should include solar PV
water pumping systems along with the other
off-grid systems for which that subsidy is offered
through NABARD and the banking sector.
Regulatory Issues
yy Single window approach required for solar
pumping, both for technology suppliers as well
as customers. The “Bihar Solar Pumping Mission”
approach proposed in the presentation should be
adopted so that all the different ministries and
departments looking at the different aspects of
reaching the solar PV water pumping system to
the farmer complement each other rather than
working at cross purposes.
Other Issues
yy Need to create awareness among the farmers,
financial institutions and Govt. officials about the
technology and its robustness.
yy With theft and vandalism being a major issue,
ways to overcome these should be looked into.
This could either be by using portable systems or
community owned systems.
yy Where landholdings are very small and
fragmented or where tenant farmers are in large
numbers, larger farmers could be motivated to
buy solar water pumping systems and sell water
to the smaller farmers.
The learning and feedback from the stakeholder
workshop, especially the barriers, potential solutions
and the key areas for programmatic intervention
have been incorporated into this study.
Brainstorming during a breakout session
Picture Courtesy: GIZ
50. 36
Potential for Solar PV Water Pumping for Irrigation in Bihar
Agenda of Stakeholder Workshop
IGEN-RE Stakeholder Workshop on Solar Water Pumping for Irrigation Agenda
Date: 09 November 2012,
Venue: Hotel Gargee Grand, 825, Exhibition Road, Patna, Bihar.
10:00 Registration
Tea/Coffee
10:30 • Welcome Note – GIZ
• Introduction to IGEN-RE project – Mr. Michael Blunck, Team Leader, IGEN-RE, GIZ
• Address by Mr. Manish Kumar Director, Bihar Renewable Energy Development Authority
(BREDA)
11:00 Discussions and sharing
• Policies Programmes on Solar water pumping for irrigations in Bihar: BREDA.
• Opportunities and challenges for solar water pump for irrigation in Bihar - Findings
from the overview paper: Mr. Thomas Pullenkav.
11:45 Tea / Coffee
12:00 Analysis of framework conditions for rolling out of solar water pumps for irrigation in
Bihar
Breakout Group 1: BREDA and line departments (Challenges and opportunities from the
policy makers in rolling out of solar technology based water pumps)
Breakout Group 2: Private sector involved with solar water pumps (Technological maturity,
Access to Finance, Capacity building, Regulatory Issues)
13:00 Summary Discussion of working group results in the plenary by Mr. Thomas Pullenkav
and Mr.Nilanjan Ghose.
13:40 Vote of Thanks- GIZ
13:45 Buffet Lunch
51. 37
Potential for Solar PV Water Pumping for Irrigation in Bihar
Table 14: List of Participants at the Stakeholder Workshop
Sl. No. Name Organisation
1. Mr. Manish Kumar Bihar Renewable Energy Development Agency
2. Mr. M. P Roy Bihar Renewable Energy Development Agency
3. Mr. B. P. Suman Bihar Renewable Energy Development Agency
4. Mr. A. A. Pandit Bihar Renewable Energy Development Agency
5. Mr. Raj Mohan Jha Bihar Renewable Energy Development Agency
6. Mr. Santosh Kumar Sinha Minor Water Resources Dept., Govt. of Bihar
7. Mr. Kishore Kumar Minor Water Resources Dept., Govt. of Bihar
8. Mr. Vidyabhushan Prasad Minor Water Resources Dept., Govt. of Bihar
9. Mr. Ajit Kumar Sinha Minor Water Resources Dept., Govt. of Bihar
10. Mr. Krishna Bihari Agriculture Dept., Govt. of Bihar
11. Ms. Nikita Bankoti Jeevika/BRLPS
12. Ms. Archana Chandola Jeevika/BRLPS
13. Mr. Mithilesh Kumar NABARD Patna
14. Mr. P.K. Jaiswal Bihar Gramin Bank
15. Mr. Pradip Bhosale Jain Irrigation Systems Limited
16. Mr. Sujeet Kumar Jain Irrigation Systems Limited
17. Mr. R. K. Sinha Jain Irrigation Systems Limited
18. Mr. Vishal Kumar Claro Energy Pvt. Ltd.
19. Mr. Abhishek Sharma Claro Energy Pvt. Ltd.
20. Mr. Sanjar Azmi TATA Power Solar Systems Limited
21. Mr. Gopal Kumar Singh SELCO Solar Light Pvt. Ltd.
22. Mr. Pawan Kumar Triveni Sales Corp. / Gautam Polymers
23. Mr. Ashim Bonal ONergy / SwitchOn
24. Ms. Elizabeth Peyton ONergy / SwitchOn
25. Mr. Naveen Kumar Greenpeace
26. Mr. V.K. Diwakar Astha
27. Ms. Sushmita Goswami SEWA Bharat
28. Mr. H.P. Singh Indian Grameen Services/BASIX
29. Mr. Ravi Ranjan The Green Mantra
30. Ms. Anuradha Das The Green Mantra
31. Ms. Tanushree Bhowmik MoP-UNDP Access to Energy Project
32. Ms. Seema Singh MoP-UNDP Access to Energy Project
33. Mr. Michael Blunck GIZ
34. Mr. NilanjanGhose GIZ
35. Ms. Meenakshi Kapoor GIZ
36. Mr. Thomas Pullenkav GIZ
52. 38
Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 5: LIST OF ORGANISATIONS/CONTACTED
The following people were contacted as part of the interview process/expert consultations:
1 Mr. Ajay Nayak, Principal Secretary, Dept. Of Energy, Govt. of Bihar.
2 Mr. Alok Kumar Sinha, Agricultural Production Commissioner and Principal Secretary, Dept. Of
Agriculture, Govt. of Bihar.
3 Mr. Raj Mohan Jha, Dy. Director, BREDA.
4 Mr. Rajesh Bari, BEE Head, BREDA.
5 Mr. Debaraj Bahera, State Project Manager – Livelihoods, Jeevika/Bihar Rural Livelihoods Project
Society.
6 Officials of the Minor Water Resources Dept., Govt. of Bihar.
7 Scientists at the ICAR Research Complex for the Eastern Region, Patna.
8 Mr. Hemant Lamba, Aurore, Pondicherry.
9 Mr. Jaspal Singh, Sr. Manager, Punjab Energy Development Agency, Chandigarh
10 Mr. C.S. Bedi, Director, Solera Energy Systems (India) Pvt. Ltd., Chandigarh.
11 Mr. Harbans Singh, Agriculturist, Village Landra, Fatehgarh Dt., Punjab.
12 Mr. Ranjeet Singh, Agriculturist, Village Jhanjeri, Ropar Dt., Punjab.
13 M/s. Gopal Nursery, Village Majad, Ropar Dt., Punjab.
14 Mr. Randeer Singh, Agriculturist, Village Dadri Majra, Fatehgarh Dt., Punjab.
15 Mr. GautamMohanka, Gautama Polymers Group, New Delhi.
16 Mr. Rahul Arora, Dy. Chief of Party - Renewable Energy, Nexant, New Delhi.
17 Mr. R. K. Vimal, Asst. General Manager (TS), IREDA, New Delhi.
18 Mr. T.C. Tripathi, Solar Energy Consultant (Former Advisor Head, MNRE).
19 Mr. Amit Kumar, Addl. GM, TATA Power Solar Systems Limited, New Delhi.
20 Mr.Gopal Kumar Singh, Asst. Manager – Energy Services and I/c Bihar Project, SELCO Solar Light (P)
Limited, Patna.
21 Dr. Harish Hande, Managing Director, SELCO Solar Light (P) Limited, Bangalore.
22 Mr. Pratyush Kumar, Regional Manager, Bihar Jharkhand, Claro Energy Pvt. Limited, Patna.
23 Mr. Vishal Kumar, Asst. Manager – Bus. Development, Claro Energy Pvt. Limited, Patna.
24 Dr. S.P. Gon Chaudhuri, NBIRT, Kolkata.
25 Mr. R.B. Jain, President, Jain Irrigation Systems Ltd., Jalgaon
26 Mr. J.J. Kulkarni, President – Technical Support Services, Jain Irrigation Systems Ltd., Jalgaon.
27 Mr. Charitra Jain, Sr. Vice President, Jain Irrigation Systems Ltd., Jalgaon.
28 Mr. Sanjeev Phadnis, Sr. Manager – Technical, Jain Irrigation Systems Ltd., Jalgaon.
29 Mr. Pradip Bhosale, Jr. Manager – Technical, Jain Irrigation Systems Ltd., Jalgaon.
53. 39
Potential for Solar PV Water Pumping for Irrigation in Bihar
30 Mr. Vivek Mundkur, Atom Solar Systems, Pune.
31 Mr. Arjun Mundkur, Atom Solar Systems, Pune.
32 Mr. Sajal Jassal, Atom Solar Systems, Pune.
33 Prof. Sanjeev Ghotge. Jt. Director Head (CCSP), World Institute of Sustainable Energy, Pune.
34 Dr. Sudhir Kumar, Jt. Director Head (Solar Energy), World Institute of Sustainable Energy, Pune.
35 Mr. Ashwin Ganbhir, Prayas Energy Group, Pune.
36 Mr. Mihir Sahana. CEO, Indian Grameen Services (Basix), Pune.
37 Mr. Manish Ram, Greenpeace.
38 Mr. Naveen Kumar, Greenpeace
39 FGD with farmers (users of Claro Solar pumps) at Mubarakpur and Dhaulatpur.
40 FGD with farmers (users of Atom Solar Pump) at KalyanBigha.
41 The study also included visits to the field for discussions with project implementers and users.
Table 15: Field Visits
Period Places Visited Achievements
August 4th week Pondicherry Discussions with Aurore. Visited pump users In Auroville
and Pondicherry.
September 1st week Chandigarh Discussions with PEDA and Solera Energy Systems. Visited
solar pumps installed under MNRE Solar Water Pumping
Programme.
September last week Patna, Nalanda,
Kolkata
Discussions with BREDA, Agriculture Dept., Energy Dept.,
Claro Energy, SELCO, Minor Water Resources Dept., ICAR
Scientists, Indian Grameen Services, Greenpeace and Dr.
S.P. GonChaudhuri. Visited Claro Pump installations.
November 2nd week Patna Discussions BREDA and Energy Dept. Stakeholder
Workshop.
November last week Jalgaon, Pune. Discussions and site visit to Jain Irrigation Systems
Limited. Discussions and site visit to Atom Solar Systems.
Discussions with WISE, Pune and Prayas Energy Group.
54. 40
Potential for Solar PV Water Pumping for Irrigation in Bihar
ANNEXURE 6: CASE STUDIES OF EXISTING BUSINESS MODELS FOR
SOLAR PV WATER PUMPING
I. Claro Energy Pvt. Ltd.
Claro Energy Private Limited (Claro) is a private
limited company offering solar powered water
pumping solutions to meet irrigation and drinking
water needs in the rural areas. Though, the company
is a Delhi based start-up, as of now, the company is
mainly active in Bihar but has plans to expand to
other states in India.
Sensing a great business opportunity in the JNNSM,
Claro Energy was set up by Kartik Wahi, Gaurav
Kumar and Soumitra Mishra in 2010. The company
soon homed in on the opportunities that off-grid,
decentralised generation such as solar-pumping
offered. To start off, Claro Energy decided to target
Bihar as it had high power deficits and, being in the
Gangetic plains, has a very high water table compared
to the rest of the country.
At present, Claro Energy caters mainly to the
Government and public sector market, as powering
of irrigation pump sets using solar power is expensive
and cannot be easily afforded by the rural people.
Some large farmers have also bought into Claro
offering of powering their irrigation pump sets with
solar energy.
Claro Energy’s main focus currently is on retrofitting
the existing irrigation pump sets powered by diesel
generators (DG) with solar energy. This initiative
will also go a long way in building awareness in the
Government and market on the feasibility of solar
power to run irrigation pump sets. Business wise,
the potential for replacing/retrofitting DG powered
pumps with solar power is very large. The Minor
Irrigation Department, with whom Claro Energy
has already installed about 34 solar PV pumps, has
a potential of more than 5,000 pumps. In addition,
there are thousands of pumps with PHED, other
Govt. schemes and more than a million private tube
well users that could potentially use Claro’s solutions.
With 80% of all land holdings in Bihar being of less
than a hectare, Claro Energy’s biggest challenge will
be to find ways of making solar affordable to the
small and marginal farmer. Claro Energy is talking
to banks and other financial institutions to try and
bring in an innovative financial package, which will
bring down the upfront cost to the farmer.
II. Atom Solar Systems
Another company that sensed an opportunity in
the area of solar water pumping for irrigation in
the energy deficit areas of the country is Pune based
Atom Solar Systems. Incorporated as a partnership
firm less than a year back by four friends Arjun
Mundkur, Sajal Jassal, Abhijit Gangoli and Milind
Katti, based on some innovative experimentation in
water pumping done by Arjun and his father Col.
Vivek Mundkur, Atom Solar Systems intends to
cater to the niche market for small solar pumping
solutions required by the small and marginal farmers.
Solar-powered irrigation systems can be the right
solution for the farmers especially in the water
rich areas of the Indo-Gangetic plains and bring
about an agricultural revolution. This can not only
solve the problem of unavailability of electricity for
agriculture, the huge consumption of subsidised
diesel but also increase the agricultural productivity
and rural livelihood options.
Atom Solar’s system is lightweight and can be
manually installed in any open well or borewell. It
delivers 1,500-2,000 litres of water per hour for 6-8
hours on a sunny day. For better water management
and maximising returns, Atom Solar recommends
that the systems should be combined with a drip
irrigation system.