Jorge Cabaco is a chartered professional engineer with extensive experience managing ground improvement and geotechnical engineering projects around the world. The document provides a portfolio of 20 selected projects demonstrating his experience with techniques like dynamic compaction, vibrocompaction, jet grouting, grouting, piling, underpinning, and slope stabilization on ports, buildings, dams, railways, and other infrastructure in locations including Australia, Portugal, and Europe. The projects involved treating soil volumes up to 5.9 million cubic meters and drilling to depths of up to 70 meters.
This document provides an introduction and overview of the Jebel Ali Terminal 4, Phase 1 project located in Dubai, UAE. The scope of work includes dredging, construction of a 400m quay wall, reclamation areas, two causeways totaling over 2km, a 420m bridge, 5km of roads, buildings, and utilities for a general cargo yard. The 18.5 month project schedule is fast-tracked and will require 24 hour operations for some activities. An environmental impact assessment was conducted to determine baseline conditions and ensure the project does not adversely affect the environment.
Enersea is an offshore engineering consultancy founded in 2015 that provides integrated technical solutions for offshore energy projects. They have a team of specialists with over 20 years of experience in offshore structure engineering, system engineering, and multi-discipline interfacing. Their services include consultancy, technical management, production system design, structural design, and helping clients identify, select, and develop offshore energy projects from early phases through final investment decision.
Mark Rannel Reynosa Gamayo has extensive experience as an electrical engineer for mining, commercial, and residential projects in Southeast Asia. His portfolio includes over 30 projects with budgets ranging from $50,000 to $20 million involving electrical infrastructure upgrades, processing plants, accommodation camps, administration buildings, hotels, retail malls, condominiums, and theme parks. He has worked in project leadership roles for mining companies, engineering firms, and as an independent consultant.
The document provides an overview of projects and initiatives at Richland College from 2011-2012 and plans for the future. It discusses renovations to parking lots, elevators, restrooms, and other buildings. It also outlines plans to increase sustainability through more efficient lighting, HVAC systems, and waste reduction. The goal is to reduce energy and water usage while saving costs.
The document provides a summary of Alpees D' Souza's qualifications and experience as a Quantity Surveyor. It includes details of his 16 years of experience in the construction industry in both the UAE and India. It lists his educational qualifications and certifications. It also provides details of 16 construction projects he has worked on in the UAE, including the clients, consultants, costs, scopes of works, and his roles and responsibilities. His computer skills and language abilities are also included.
Nilo Ramos Taghoy has over 15 years of experience in quality assurance and construction supervision. He currently works as a Structure Inspector/Supervisor in Qatar. Previous positions include QA/QC Inspector roles in Saudi Arabia, UAE, Philippines, and Qatar. He has experience supervising projects such as highways, bridges, buildings, oil and gas facilities, and railways. Nilo holds a Bachelor's degree in Civil Engineering from the University of Cebu and is a member of the Philippine Institute of Civil Engineering.
Nilo Ramos Taghoy has over 15 years of experience in quality assurance and construction supervision in the Philippines and abroad. He currently works as a Structure Inspector/Supervisor in Qatar. Previous positions include QA/QC Inspector roles in Saudi Arabia, the UAE, and the Philippines supervising projects in oil and gas, infrastructure, and buildings. He has a Bachelor's degree in Civil Engineering from the University of Cebu and is a member of the Philippine Institute of Civil Engineering.
This document provides an introduction and overview of the Jebel Ali Terminal 4, Phase 1 project located in Dubai, UAE. The scope of work includes dredging, construction of a 400m quay wall, reclamation areas, two causeways totaling over 2km, a 420m bridge, 5km of roads, buildings, and utilities for a general cargo yard. The 18.5 month project schedule is fast-tracked and will require 24 hour operations for some activities. An environmental impact assessment was conducted to determine baseline conditions and ensure the project does not adversely affect the environment.
Enersea is an offshore engineering consultancy founded in 2015 that provides integrated technical solutions for offshore energy projects. They have a team of specialists with over 20 years of experience in offshore structure engineering, system engineering, and multi-discipline interfacing. Their services include consultancy, technical management, production system design, structural design, and helping clients identify, select, and develop offshore energy projects from early phases through final investment decision.
Mark Rannel Reynosa Gamayo has extensive experience as an electrical engineer for mining, commercial, and residential projects in Southeast Asia. His portfolio includes over 30 projects with budgets ranging from $50,000 to $20 million involving electrical infrastructure upgrades, processing plants, accommodation camps, administration buildings, hotels, retail malls, condominiums, and theme parks. He has worked in project leadership roles for mining companies, engineering firms, and as an independent consultant.
The document provides an overview of projects and initiatives at Richland College from 2011-2012 and plans for the future. It discusses renovations to parking lots, elevators, restrooms, and other buildings. It also outlines plans to increase sustainability through more efficient lighting, HVAC systems, and waste reduction. The goal is to reduce energy and water usage while saving costs.
The document provides a summary of Alpees D' Souza's qualifications and experience as a Quantity Surveyor. It includes details of his 16 years of experience in the construction industry in both the UAE and India. It lists his educational qualifications and certifications. It also provides details of 16 construction projects he has worked on in the UAE, including the clients, consultants, costs, scopes of works, and his roles and responsibilities. His computer skills and language abilities are also included.
Nilo Ramos Taghoy has over 15 years of experience in quality assurance and construction supervision. He currently works as a Structure Inspector/Supervisor in Qatar. Previous positions include QA/QC Inspector roles in Saudi Arabia, UAE, Philippines, and Qatar. He has experience supervising projects such as highways, bridges, buildings, oil and gas facilities, and railways. Nilo holds a Bachelor's degree in Civil Engineering from the University of Cebu and is a member of the Philippine Institute of Civil Engineering.
Nilo Ramos Taghoy has over 15 years of experience in quality assurance and construction supervision in the Philippines and abroad. He currently works as a Structure Inspector/Supervisor in Qatar. Previous positions include QA/QC Inspector roles in Saudi Arabia, the UAE, and the Philippines supervising projects in oil and gas, infrastructure, and buildings. He has a Bachelor's degree in Civil Engineering from the University of Cebu and is a member of the Philippine Institute of Civil Engineering.
Science Centre Station Open House - June 2017Crosstown TO
The document provides information about the construction of the Eglinton Crosstown LRT project in Toronto. It discusses Metrolinx's regional transportation plan, the project players and their roles, details about the light rail transit line including its route and features, construction methods like cut-and-cover and mining, project timelines and milestones for 2017, and community benefits programs related to employment, procurement, and investment.
The Amal Modular Yard (AMY) cluster in Peniche, Portugal aims to be a modular construction hub for oil and gas projects. It consists of expert partner companies in fabrication, coatings, electrical works, and steel structures that work together in the yard's facilities. The AMY cluster promises technical efficiency, quality control, logistics optimization, and faster project execution for clients through its integrated services and modular approach.
Nilo Ramos Taghoy has over 15 years of experience in quality assurance and construction supervision of various infrastructure and industrial projects in the Philippines and Middle East. He is currently a Structure Inspector/Supervisor at WS Atkins & Partners Overseas in Qatar, overseeing quality control on a highway project. Previously he has held QA/QC roles on oil and gas, petrochemical and railway projects in Saudi Arabia, UAE and the Philippines. He has a Bachelor's degree in Civil Engineering from the University of Cebu.
This document provides a summary of Mohammed Ghayoor Khan's qualifications and experience. He has over 20 years of experience in civil engineering and construction projects in Pakistan and the UAE. His roles have included civil engineering, construction supervision, quality control, and health and safety. He is a civil engineer with the Pakistan Engineering Council and has extensive experience managing infrastructure projects such as roads, bridges, utilities and buildings.
Mark Fayle has over 14 years of experience in industrial engineering projects focusing on water and power industries. He has held roles as an estimator, project engineer, procurement manager, and estimating manager. Some of his key achievements include successfully sourcing fabrication in China for multi-million dollar projects and managing the estimating for a $60 million contract to upgrade a power station's water treatment plant. He has a proven track record in estimating, procurement, and contract management.
This document provides details on the author's extensive experience in offshore oil and gas projects, including management roles in engineering, design, manufacturing, installation, and commissioning of subsea systems and equipment. Some key experiences mentioned include management of pipeline and umbilical installations, wind farm cable installations, decommissioning projects, and design of specialized launch and connection systems for subsea infrastructure.
Philip Harrison has over 35 years of experience in the offshore survey industry. He has specialized in hydrographic, offshore geophysical surveys, and pipe laying operations. Since 2016, he has managed the survey department of Abu Dhabi Marine Dredging Company in Bahrain, where he was responsible for building the team and overseeing all survey activities for a large land reclamation project.
AllenCon is a civil infrastructure contractor that delivers quality projects including road, bridge, drainage and other construction. It prides itself on effective community consultation and engaging local subcontractors and suppliers. AllenCon has capabilities in various types of civil construction and repair work. It is committed to health and safety, quality, and environmental standards in its work.
Wilkie Civil Engineering is a civil and structural engineering firm that has been operating since 1985. They provide various engineering services including subdivision design, geotechnical investigations, retaining walls, stormwater drainage, and structural assessments. They have experience with projects such as residential and commercial developments, infrastructure projects, and bridge and building design. Wilkie is located in Australia with offices in Perth, Newcastle, and Melbourne. They emphasize their dedication to clients and providing customized engineering solutions.
This document provides a summary of Shaun Harnden's work experience, including over 20 years of experience in the offshore industry, primarily in subsea engineering roles. He has worked for several major oil and gas companies, managing a variety of subsea projects involving design, procurement, installation, and commissioning. His background demonstrates extensive experience leading subsea engineering teams and contractor interfaces on large-scale development projects.
1. Osama Khatib is a survey engineer with over 15 years of experience in Qatar and the UAE, specializing in infrastructure projects including roads, sewers, and pipelines.
2. He holds a Bachelor's degree in Civil Engineering and qualifications in land surveying. His responsibilities have included site coordination, resolving design conflicts, quality control, and liaising with clients and contractors.
3. Notable recent projects include infrastructure development for a new city in Qatar and sewerage networks in Abu Dhabi. Osama is proficient in various surveying software and equipment and is seeking new challenges.
Desmond Jameson is a senior piping engineer with over 40 years of experience in the offshore and onshore oil and gas industry. He has extensive experience engineering piping systems for production platforms, FPSOs, refineries, and offshore modules. Most recently, he has worked on projects for Wood Group Engineering providing engineering support for various assets in the UK North Sea.
Evermay Sec. 7b Underground Detention Facility Replacement ProjectFairfax County
The project replaced the failed underground gravel detention facility with a new detention system. Improvements were also made to the existing storm drainage system. This project provides a reduction of 1.6 pounds of total phosphorous, 18.6 pounds of total nitrogen and 1,246 pounds of sediment per year.
This document outlines the technical experiences from an intern's second industrial training placement involving pile foundation construction. It provides details on:
- The training placements at Castle Residence Apartment Complex and Tri-Zen High Rise Residential Complex projects.
- Experiences with waterproofing and the processes involved at Castle Residence.
- The machinery, pile setting out, casing installation, soil/rock sampling, reinforcement installation and concrete pouring processes observed for pile foundations at Tri-Zen.
- Problems encountered like unusable concrete and collapsed casings, and how they were addressed.
- The conclusion that the intern gained valuable geotechnical engineering experience and insights working with experts in the field.
Khalid Khan is a Pakistani engineering geologist and geotechnical engineer with over 18 years of experience working in the UAE, Bahrain, Qatar, Oman, and Pakistan. He has extensive experience supervising geotechnical aspects of major infrastructure projects such as reservoirs, highways, tunnels, and buildings. Currently he works as an engineering geologist for Arcadis in the UAE, where his responsibilities include reviewing contractor submittals, inspecting construction works, and ensuring compliance with design specifications.
Pacific Industrial Company is a Western Australian steel fabrication and construction company founded in 1969. It has a majority shareholding in Como Engineers, allowing it to offer engineering, procurement, construction contracts. Some of PIC's major projects include the Tropicana Gold Mine, Karara Iron Ore, Sino Iron Project, and various projects for BHP Billiton Iron Ore and Rio Tinto. PIC has experience across the resources, oil and gas, industrial and infrastructure sectors.
OilKey Subsurface Consulting was established to provide reservoir engineering, geology, and geophysics consulting services to the oil and gas industry. Their services include field development planning, reserves estimation and audits, reservoir modeling, and evaluations for mergers and acquisitions. They have experience working on projects globally and can provide high quality analysis and reports to clients.
The Clay Park update document summarizes recent projects and planned improvements for Clay Park. The fence project is now complete. Estimated costs for a demonstration garden and new recreation equipment are $40,000-$75,000, and these projects could be funded through fundraising with a self-imposed timeline. Other planned updates include replacing playground equipment through a District 9 CIP request.
1. Manikandan MUTHUKRISHNAN's CV summarizes his 25+ year career in well engineering and drilling, including positions at Shell, Cairn Energy, and ONGC in India, Nigeria, the UAE, USA, and other locations.
2. He has extensive experience in well design, planning, operations, cost estimation, HSE audits, and using drilling software.
3. His roles have included senior well engineer, principal operations engineer, consultant senior drilling engineer, and other engineering and operations positions on exploration, appraisal, and development drilling projects.
Este documento presenta una clasificación del derecho en diferentes categorías. Explica que el derecho puede ser subjetivo u objetivo. El derecho subjetivo incluye derechos públicos, políticos y civiles. El derecho objetivo se divide en derecho interno, que rige las relaciones dentro de un estado, y derecho externo o interestatal, que rige las relaciones entre estados. También provee definiciones de conceptos legales como derecho positivo y natural.
Science Centre Station Open House - June 2017Crosstown TO
The document provides information about the construction of the Eglinton Crosstown LRT project in Toronto. It discusses Metrolinx's regional transportation plan, the project players and their roles, details about the light rail transit line including its route and features, construction methods like cut-and-cover and mining, project timelines and milestones for 2017, and community benefits programs related to employment, procurement, and investment.
The Amal Modular Yard (AMY) cluster in Peniche, Portugal aims to be a modular construction hub for oil and gas projects. It consists of expert partner companies in fabrication, coatings, electrical works, and steel structures that work together in the yard's facilities. The AMY cluster promises technical efficiency, quality control, logistics optimization, and faster project execution for clients through its integrated services and modular approach.
Nilo Ramos Taghoy has over 15 years of experience in quality assurance and construction supervision of various infrastructure and industrial projects in the Philippines and Middle East. He is currently a Structure Inspector/Supervisor at WS Atkins & Partners Overseas in Qatar, overseeing quality control on a highway project. Previously he has held QA/QC roles on oil and gas, petrochemical and railway projects in Saudi Arabia, UAE and the Philippines. He has a Bachelor's degree in Civil Engineering from the University of Cebu.
This document provides a summary of Mohammed Ghayoor Khan's qualifications and experience. He has over 20 years of experience in civil engineering and construction projects in Pakistan and the UAE. His roles have included civil engineering, construction supervision, quality control, and health and safety. He is a civil engineer with the Pakistan Engineering Council and has extensive experience managing infrastructure projects such as roads, bridges, utilities and buildings.
Mark Fayle has over 14 years of experience in industrial engineering projects focusing on water and power industries. He has held roles as an estimator, project engineer, procurement manager, and estimating manager. Some of his key achievements include successfully sourcing fabrication in China for multi-million dollar projects and managing the estimating for a $60 million contract to upgrade a power station's water treatment plant. He has a proven track record in estimating, procurement, and contract management.
This document provides details on the author's extensive experience in offshore oil and gas projects, including management roles in engineering, design, manufacturing, installation, and commissioning of subsea systems and equipment. Some key experiences mentioned include management of pipeline and umbilical installations, wind farm cable installations, decommissioning projects, and design of specialized launch and connection systems for subsea infrastructure.
Philip Harrison has over 35 years of experience in the offshore survey industry. He has specialized in hydrographic, offshore geophysical surveys, and pipe laying operations. Since 2016, he has managed the survey department of Abu Dhabi Marine Dredging Company in Bahrain, where he was responsible for building the team and overseeing all survey activities for a large land reclamation project.
AllenCon is a civil infrastructure contractor that delivers quality projects including road, bridge, drainage and other construction. It prides itself on effective community consultation and engaging local subcontractors and suppliers. AllenCon has capabilities in various types of civil construction and repair work. It is committed to health and safety, quality, and environmental standards in its work.
Wilkie Civil Engineering is a civil and structural engineering firm that has been operating since 1985. They provide various engineering services including subdivision design, geotechnical investigations, retaining walls, stormwater drainage, and structural assessments. They have experience with projects such as residential and commercial developments, infrastructure projects, and bridge and building design. Wilkie is located in Australia with offices in Perth, Newcastle, and Melbourne. They emphasize their dedication to clients and providing customized engineering solutions.
This document provides a summary of Shaun Harnden's work experience, including over 20 years of experience in the offshore industry, primarily in subsea engineering roles. He has worked for several major oil and gas companies, managing a variety of subsea projects involving design, procurement, installation, and commissioning. His background demonstrates extensive experience leading subsea engineering teams and contractor interfaces on large-scale development projects.
1. Osama Khatib is a survey engineer with over 15 years of experience in Qatar and the UAE, specializing in infrastructure projects including roads, sewers, and pipelines.
2. He holds a Bachelor's degree in Civil Engineering and qualifications in land surveying. His responsibilities have included site coordination, resolving design conflicts, quality control, and liaising with clients and contractors.
3. Notable recent projects include infrastructure development for a new city in Qatar and sewerage networks in Abu Dhabi. Osama is proficient in various surveying software and equipment and is seeking new challenges.
Desmond Jameson is a senior piping engineer with over 40 years of experience in the offshore and onshore oil and gas industry. He has extensive experience engineering piping systems for production platforms, FPSOs, refineries, and offshore modules. Most recently, he has worked on projects for Wood Group Engineering providing engineering support for various assets in the UK North Sea.
Evermay Sec. 7b Underground Detention Facility Replacement ProjectFairfax County
The project replaced the failed underground gravel detention facility with a new detention system. Improvements were also made to the existing storm drainage system. This project provides a reduction of 1.6 pounds of total phosphorous, 18.6 pounds of total nitrogen and 1,246 pounds of sediment per year.
This document outlines the technical experiences from an intern's second industrial training placement involving pile foundation construction. It provides details on:
- The training placements at Castle Residence Apartment Complex and Tri-Zen High Rise Residential Complex projects.
- Experiences with waterproofing and the processes involved at Castle Residence.
- The machinery, pile setting out, casing installation, soil/rock sampling, reinforcement installation and concrete pouring processes observed for pile foundations at Tri-Zen.
- Problems encountered like unusable concrete and collapsed casings, and how they were addressed.
- The conclusion that the intern gained valuable geotechnical engineering experience and insights working with experts in the field.
Khalid Khan is a Pakistani engineering geologist and geotechnical engineer with over 18 years of experience working in the UAE, Bahrain, Qatar, Oman, and Pakistan. He has extensive experience supervising geotechnical aspects of major infrastructure projects such as reservoirs, highways, tunnels, and buildings. Currently he works as an engineering geologist for Arcadis in the UAE, where his responsibilities include reviewing contractor submittals, inspecting construction works, and ensuring compliance with design specifications.
Pacific Industrial Company is a Western Australian steel fabrication and construction company founded in 1969. It has a majority shareholding in Como Engineers, allowing it to offer engineering, procurement, construction contracts. Some of PIC's major projects include the Tropicana Gold Mine, Karara Iron Ore, Sino Iron Project, and various projects for BHP Billiton Iron Ore and Rio Tinto. PIC has experience across the resources, oil and gas, industrial and infrastructure sectors.
OilKey Subsurface Consulting was established to provide reservoir engineering, geology, and geophysics consulting services to the oil and gas industry. Their services include field development planning, reserves estimation and audits, reservoir modeling, and evaluations for mergers and acquisitions. They have experience working on projects globally and can provide high quality analysis and reports to clients.
The Clay Park update document summarizes recent projects and planned improvements for Clay Park. The fence project is now complete. Estimated costs for a demonstration garden and new recreation equipment are $40,000-$75,000, and these projects could be funded through fundraising with a self-imposed timeline. Other planned updates include replacing playground equipment through a District 9 CIP request.
1. Manikandan MUTHUKRISHNAN's CV summarizes his 25+ year career in well engineering and drilling, including positions at Shell, Cairn Energy, and ONGC in India, Nigeria, the UAE, USA, and other locations.
2. He has extensive experience in well design, planning, operations, cost estimation, HSE audits, and using drilling software.
3. His roles have included senior well engineer, principal operations engineer, consultant senior drilling engineer, and other engineering and operations positions on exploration, appraisal, and development drilling projects.
Este documento presenta una clasificación del derecho en diferentes categorías. Explica que el derecho puede ser subjetivo u objetivo. El derecho subjetivo incluye derechos públicos, políticos y civiles. El derecho objetivo se divide en derecho interno, que rige las relaciones dentro de un estado, y derecho externo o interestatal, que rige las relaciones entre estados. También provee definiciones de conceptos legales como derecho positivo y natural.
This document discusses the idea that in the future, as international law evolves into a global law and non-state actors gain influence, peoples or nations may become distinct subjects of law with rights and obligations under the new global legal order. It argues that collective rights recognized as third generation human rights, like rights to development and a healthy environment, could be developed as fundamental rights for peoples. This would recognize peoples, not just states, as represented in international organizations and able to assume global legal responsibilities in the emerging 21st century global legal framework.
Surat ini memberikan tawaran harga untuk 12 unit Waist Brand Amplifier dengan harga RM360 setiap unit, untuk keperluan Universiti Teknologi MARA. Surat ini ditujukan kepada En Shamsol Bin Shafie dari UiTM dan ditandatangani oleh pengurus Norvest edar sdn bhd, Razeeda Mohd Zin.
Bulletin de nouvelles RIET N° 13 – novembre 2016RIET_INEW
Chaque personne qui fait partie du RIET, elle le fait ayant la certitude de se trouver dans un espace qui relie les chemins entre les institutions du monde entier destinées à générer des échanges des élèves et des enseignants, des méthodologies du travail et, nalement, de nouvelles opportunités. En vu d’atteindre ces buts et tant d’autres, ont été conclues des conventions avec les organisations plus remarquables dans le développement de leurs tâches et qui sont aussi intéressées à faire partie de cette initiative.
ACME is expanding its distribution center due to increased demand that exceeds its current facility's capacity. A new warehouse design is proposed with increased storage capacity, equipment, and staffing to accommodate projected 7% annual growth in orders and 2% growth in stock keeping units through 2021. Key recommendations include replacing pallet jacks and manual order pickers with narrow aisle deep reach trucks, optimizing storage with 3-deep pushback racks, and increasing labor from 364 full-time and 16 support staff on average to 728 and 32 with a maximum surge workforce of 1,092. The new design aims to improve efficiency, flexibility and throughput to support ACME's growth.
This document provides information about jet grouting applications. It begins by explaining that jet grouting involves using high-pressure fluid to break up soil and mix it with grout to form columns, panels, and other underground structures. It then discusses the advantages of jet grouting and different jet grouting systems and parameters. Examples of jet grouting projects are also presented with diagrams of jet grout column geometries.
Ведущий: Ольга Зиненко
Уральский центр систем безопасности проводит независимое тестирование мобильных антивирусов, разработанных для платформы Android (в том числе Dr.Web, Kaspersky, Norton, ESET). Доклад посвящен результатам исследования. Показатели, которые оцениваются в первую очередь: выполнение заявленных функций, уровень защиты, возможности обхода, наличие уязвимостей, полезность и значимость дополнительных функций.
john-devkit: 100 типов хешей спустя / john-devkit: 100 Hash Types LaterPositive Hack Days
Ведущий: Алексей Черепанов
Скорость взлома хешей растет. Растет и количество алгоритмов хеширования. Объем задач для поддержки универсального инструмента для взлома тоже увеличивается. В ответ на это был разработан john-devkit — улучшенный генератор кода к известному приложению для взлома паролей John the Ripper. john-devkit содержит более 100 типов хешей. Ведущий рассмотрит ключевые аспекты его использования: разделение алгоритмов, оптимизация и вывод данных для различных устройств, простое промежуточное представление алгоритмов хеширования, трудности оптимизации для человека и машины, bitslicing, сравнение скорости обработки.
Módulo ii reglamentación, res y materiales certif eplicados a un proyecto v2Alejandro Ramos
El documento presenta una guía sobre la Reglamentación para la Ejecución de Instalaciones Eléctricas en Inmuebles (AEA 90364) en Argentina. Explica que la reglamentación establece las condiciones mínimas de seguridad para las instalaciones eléctricas en viviendas e inmuebles. Luego, detalla los pasos para realizar un proyecto eléctrico completo para una vivienda unifamiliar, incluyendo el cálculo de circuitos, selección de equipos y materiales.
Rapid urban and industrial growth demands more land for further development, to meet this demand land reclamation and utilization of unsuitable and environmentally affected lands have been taken up and converted to useful ones by adopting one or more Ground Improvement Techniques
Este documento describe varios tipos de música moderna, incluyendo hip hop, pop, techno, reggaeton, heavy metal, punk, rock y gothic metal. Resume cada género musical en 1-2 oraciones, destacando sus características principales como el uso de instrumentos electrónicos, ritmos repetitivos para bailar, influencias de otros estilos latinos, guitarras distorsionadas, melodías simples y voces femeninas.
This document provides information on grouting and guniting processes. It defines grouting as placing a cementitious material into cavities to improve load capacity or repair structures. Grouting mixtures are described along with categories, properties, specifications and applications. Guniting is introduced as a technique using pneumatic application of cementitious mortar to rehabilitate structures like bridges and buildings. The document outlines equipment, procedures and processes for mixing, pumping and applying grouts and shotcrete.
This document provides information on various offshore and industrial fabrication projects completed by E-Profiil between 2013-2017. It includes projects such as wireline riser tensioning systems, azipod mounting blocks, thrusters, catwalk pipe conveyors, A-frames, winch foundations, lattice booms, riser clamps, hang-off towers, module handling compensators, chain stoppers, block assemblies, knuckle boom cranes, dredger cranes, spiral casings, bridges, automated guided vehicles, and lattice boom cranes. The document outlines the scope, dimensions, weight and other details for each project.
MARITIME, NAVAL, OFFSHORE & MARINE ENERGY WELDING SPECIALISTS. DEGIMA Naval &...DEGIMA SA
MARITIME, NAVAL, OFFSHORE & MARINE ENERGY WELDING SPECIALISTS. DEGIMA Naval & Civil engineering at North of Spain
WAVE ENERGY DEVICES Since 2006 we have been manufacturing different Power Buoys and Underwater Substation Pod, among other different structures and ancillary products.
OFFSHORE WIND DEVICES
Other than the wave energy devices, Degima has been manufacturing Offshore Wind Masts and Offshore Weather Masts (floating steel platforms).
AC2 provides technical consulting services in geotechnical and civil engineering, designing technical solutions to meet customer needs. It specializes in soil treatment and foundation solutions, responding to growing demand. AC2 aims to fully satisfy clients with a specialized technical staff that has years of experience in geotechnical engineering for both project development and construction.
AC2 provides technical consulting services in geotechnical and civil engineering, designing technical solutions to meet customer needs. It specializes in soil treatment and foundation solutions, responding to growing demand. AC2 aims to fully satisfy clients with a specialized technical staff that has years of experience in geotechnical engineering for both project development and construction.
This document is a curriculum vitae for Isiwu Emmanuel Uchenna. It summarizes his experience as a Rigger Foreman and Coating Application Technician since 1993, working on dynamically positioned derrick/lay barges in Nigeria, West Africa, the Gulf of Mexico, and Brazil. It also provides details of his education, qualifications, training, skills, and referees.
OFFSHORE CV DYLAN OLIVIER UPDATE Oct 2014Dylan Olivier
Dylan Matthew Olivier is an IRATA Level 3 rope access technician with experience in rope access construction, maintenance, inspection and training. He has worked on offshore oil rigs and FPSOs in Angola performing tasks like bolt replacement, flowline installation, and maintenance of equipment. He has additional qualifications in confined space rescue, lifting, rigging, and safety training.
1. Study, review (as Consultant) or prepare (as Contractor) Shop Drawings according to Design.
2. Coordination and prepare Composite drawing for all activities.
3. Follow up the construction (as Consultant) or construct (as Contractor) the Surveying works for all activities.
4. Quantities survey for excavations & backfilling by computer programs.
Autodesk Land Desktop program
AutoCAD AutoCAD Civil3D
TERRAMODEL Surfer program
Microsoft windows Microsoft Office
This document provides a summary of Michael Mount's work experience and qualifications as a rigger and rope access technician. He has over 30 years of experience in rigging, erecting, and rope access work. He is currently employed as a rigger by Aker Solutions Ltd on the Solan Project. He has a variety of certifications, including OPITO Rigger Level 4, IRATA Rope Access Technician Level 1, and NVQ and CPCS qualifications.
This document provides a summary of Michael Mount's work experience and qualifications as a rigger and rope access technician. He has over 30 years of experience in rigging, erecting, and rope access work. He is currently employed as a rigger by Aker Solutions Ltd on the Solan Project. He has a variety of certifications, including OPITO Rigger Level 4, IRATA Rope Access Technician Level 1, and NVQ and CPCS qualifications.
Anese began its activities in the agricultural field, later branching into works connected with irrigation and flood management, together with earth movements and the removal of lithoid materials.
Experience and skills earned through time and the level of precision realised have allowed the company to widen its horizons in the field of road construction and urban planning, aqueducts and sewage management as well as other specialised fields, both private and public including prompt emergency assistance to the "Protezione Civile" in the event of natural disasters. In an afford to diversify their technical/commercial competence, the field of work has recently been extended to include projects in horizontal directional drilling.
Another sector of special application is land stabilisation using new technologies for the recycling of terrain, and land reclamation. This application can be employed for road and railway civil engineering (embankments etc..) as well as for the construction of airports and other infrastructural works.
Anese also offers important technical contributions to the field of agriculture in the creation of underground drainage systems to avoid the accumulation of surface water owing to rainfall, maintaining a constant underground water level during periods of heavy rainfall. The result of this is increased land productivity.
This document provides a curriculum vitae for Oscar M. Bandeira, a Brazilian civil engineer with over 50 years of experience in the design, construction, and management of large hydropower projects around the world. Some of his roles included resident engineer, construction manager, and superintendent. He has extensive experience supervising civil works including dams, tunnels, powerhouses, and other structures. Currently he works as the superintendent's engineering at the Belo Monte Hydropower Project in Brazil, one of the largest hydropower projects in the world.
Vedam Design is an ISO 9001-2015 certified engineering firm with offices in India, UAE, and Netherlands that provides design and engineering services for marine vessels. They have a team of 80 professionals and have completed over 650 projects in 30 countries. The document discusses Vedam Design's dredging expertise and proposes solutions for shallow water maintenance dredging projects in India. It suggests either the new construction of small, cost-effective trailer suction hopper dredgers or the conversion of existing vessels like barges as viable options. Conversion can reduce costs by 50-75% compared to new builds and offers a shorter timeline.
Extreme Drilling LLP is a company that provides drilling and workover services in Kazakhstan. It has experience drilling vertical and directional wells, performing workovers, directional drilling, and well testing. The company uses latest equipment to mobilize quickly for projects. Some recent projects included directional drilling on the Taldykuduk field, drilling exploration wells on the Sherebainurinskoe field, sidetracking wells on the Bozoba Zapadnaya and Amangeldy fields, and workovers on the Sarkyramabas field. Extreme Drilling is ready to bid on future drilling and sidetracking projects.
This document contains the resume of Chisom Aloysius Okereke. It summarizes his professional experience working as a senior workover engineer and well site geologist on offshore and onshore oil projects in Nigeria. It also lists his educational qualifications including a BSc in Geological Sciences and safety and technical training certificates. His skills include experience in well intervention operations, pressure testing, artificial lift, and basic geological interpretation.
Conceptual design study Kriegers Flak 090618 redusedThomas Stalin
Vattenfall is a large European energy company with wind power activities in several countries. This document summarizes a conceptual design study for foundations for an offshore wind farm called Kriegers Flak in waters 15-45 meters deep. Five foundation concepts were developed - monopile, jacket, concrete tripod, gravity base cone foundation, and drilled concrete monopile. The study aimed to reduce costs and risks for the project planned to begin construction in 2013 through preliminary engineering of foundation options and establishing early contact with contractors.
Stephen Groombridge has over 30 years of experience operating heavy plant and equipment on various civil engineering, construction, and landscaping projects. He specializes in safely operating excavators, dump trucks, bulldozers, and other equipment. Some of his major achievements include contributing to health and safety plans in France and completing projects on time and under budget in the UK. He is qualified to operate various types of heavy machinery and is seeking new opportunities in plant operation.
This resume summarizes the work experience of Norfadzly Nordin, including his current position as Construction Manager. Over 13 years of experience in oil and gas projects, he has worked on numerous pipeline and platform installation projects for companies like Petronas, ExxonMobil, and Shell. His responsibilities have included supervising field engineers, interfacing with clients, ensuring safety and cost efficiency, and overseeing offshore construction activities to meet schedules and requirements. He has extensive experience managing the installation of pipelines, platforms, bridges, and other oil and gas infrastructure.
- Fishbones is a technology company that provides multilateral stimulation solutions like jetting and drilling to increase production from oil and gas wells.
- They have over 20 installations globally with proven results like increased and sustained production, improved injectivity, and reduced environmental impact.
- Case studies demonstrated Fishbones' ability to unlock tight reservoirs and increase production over 2x in some cases by accurately connecting the reservoir.
This curriculum vitae summarizes the qualifications and experience of Zoran Erdeljanac. He has over 30 years of experience as a mechanical engineer, welding technologist, and site manager for projects in Serbia, Libya, and other countries. His background includes managing piping installation, equipment overhauls, and refurbishment projects in oil, gas, and power industries. He is proficient in engineering design, project planning, and safety procedures.
Brownfield sites in N Ireland, case study on Belfast Ship yards development
Selected Projects Portfolio Jorge Cabaco
1. JORGE CABACO l CHARTERED PROFESSIONAL ENGINEER
Ground Improvement Grouting
SELECTED PROJECTS PORTFOLIO
GROUND ENGINEERING l GEOTECHNICAL ENGINEERING
Retaining Walls
Deep Foundations Slope Stabilization Remediation Works
1
2. GROUND IMPROVEMENT / DYNAMIC COMPACTION
Jorge Cabaco Portfolio l Chartered Professional Engineer 2
• Location: Botany / Sydney / Australia / 2008-2009
• Client: Baulderstone Hornibrook / Jean De Null
• Geotechnical Contractor: Menard Bachy (Design & Construction)
• Consultant: Golder Associates
• Role: Ground Improvement Project Manager
• Application: Ports
• Techniques: Dynamic Compaction; Vibrocompaction on shore and offshore; Wick Drains
• Dynamic Compaction Quantities of Treatment: 5,900,000 m3
• Maximum Depth of Treatment: 12,0m
PORT BOTANY l EXPANSION PROJECT EARLY WORKS l SYDNEY
3. GROUND IMPROVEMENT l VIBROCOMPACTION OFFSHORE
3
PORT BOTANY l TRENCH FOUNDATIONS l SYDNEY
• Vibrocompaction Quantities of Treatment: 800,000 m3
Jorge Cabaco Portfolio l Chartered Professional Engineer
4. • Vibrocompaction Quantities of Treatment: 650,000 m3
4
GROUND IMPROVEMENT l VIBROCOMPACTION ONSHORE
PORT BOTANY l LOAD OUT WHARF l SYDNEY
Jorge Cabaco Portfolio l Chartered Professional Engineer
5. 5
• Location: Coimbrao / Central Portugal / 2005
• Client: ETAR NORTE / Residual Water Treatment Plant
• Geotechnical Contractor: Keller Group (Design & Construction)
• Consultant: Hidroprojecto
• Role: Ground Improvement Project Manager
• Application: Residual Water Treatment
• Techniques: Vibrocompaction; Water Well; CPT’s; Dewatering using
Well Points: Water level reduced to about 4,0m in the area of about
5,000 m2; 6 Vacuum Hudig Pumps working over 4 months;
Excavation for installation of water treatment tanks
• Quantities: 400,000 m3 treatment sand soils up to 12,0m depth;
water well 220,0m depth; 40 CPT’s Tests in situ;
GROUND IMPROVEMENT l VIBROCOMPACTION ONSHORE
RESIDUAL WATER TREATMENT STATION l PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
6. • Location: Obidos / West Coast Portugal / 2003
• Client: IHERA Public Hydric Resources
• Geotechnical Contractor: Keller Group (Design & Construction)
• Consultant: Hidroprojecto
• Role: Ground Improvement and slope Stabilization Project Manager
• Application: Earth Dam
• Techniques: Stone Columns; Rock Bolts; Shotcreting
• Quantities: 45,000 lm Stone Columns 1000mm diameter; 2,000 lm Rock Bolts; 10,000 m2 Shotcreting
• Maximum Depth of Treatment: 12,0m
6
GROUND IMPROVEMENT l VIBROREPLACEMENT l STONE COLUMNS
OBIDOS DAM l WEST PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
7. 7
SLOPE STABILIZATION l ROCK BOLTS l SHOTCRETING
OBIDOS DAM l WEST PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
8. 8
• Location: Vila Franca de Xira / Lisbon Portugal / 2004
• Client: REFER E.P. – Rail Way Portuguese Public Company
• Geotechnical Contractor: Keller Group
• Consultant: COBA Engineering and Environmental
Consultants
• Role: Ground Improvement Project Manager
• Application: Rail Way
• Techniques: Wick Drains; Stone Columns; Vane Tests
• Quantities: 1,500,000 lm Wick Drains; 24,000 lm Stone
Columns 1000mm diameter;
• Maximum Depth of Treatment: 14,0m
GROUND IMPROVEMENT l WICK DRAINS l ACCELERATION OF
CONSOLIDATION
RAIL WAY NORTH LINE VFX l LISBON l PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
9. 9
• Location: Vila Nova de Gaia/ Porto / Portugal /
2004
• Client: El Corte Ingles / Mega Store
• Geotechnical Contractor: Keller Group
• Role: Ground Improvement Project Manager
• Application: Deep Excavation / Reduce the
Water Affluence to the Excavation
• Techniques: Jet Grouting Columns Triple Fluid
• Quantities: 7,500 lm Jet Grouting Columns
800mm diameter;
• Maximum Depth: 24,0m
GROUTING l JET GROUTING TRIPLPE FLUID l JOINT SEALING
EL CORTE INGLES l PORTO l PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
10. 10
• Location: Viana do Castelo / North Portugal /
2005
• Client: Viana do Castelo Council
• Geotechnical Contractor: Keller Grundbau
• Role: Ground Engineering Project Manager
(Design & Construction)
• Application: Buildings Car Park
• Techniques: Jet Grouting Columns; Dewatering
with Water Wells & Well Points
• Quantities: 1,720 lm Jet Grouting Columns
1500-2000mm diameter; 13 Water wells; 4
Vacuum Hudig Pumps over 1 year
• Maximum Depth: 9,0m
JET GROUTING DOUBLE FLUID l GROUT CURTAIN l DEWATERING
CAR PARK UNDERGROUND l NORTH PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
11. 11
Specifications:
• Load Capacity = Ø 1800mm (JG) +
Ø 127mm/ tickness 9 mm (steel
tubes) = 7200 + 1084 = 8,284 kN –
Replacing Bored Piles Ø 1400mm
and Ø 1200mm
• Load Capacity = 1400m m (JG)
+ 127mm/ tickness 9 mm (steel
tubes) = 4360 + 1084 = 5,444 kN –
Replacing Bored Piles Ø 800mm
JET GROUTING DOUBLE FLUID l REINFORCED WITH MICROPILING
CAR PARK UNDERGROUND l NORTH PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
12. 12
• Location: Lisbon Portugal / 2006
• Client: Euromobiliaria / Private Company
• Geotechnical Contractor: Keller Group
• Consultant: JetSJ
• Role: Project Manager
• Application: Retaining Wall / Deep Excavation
• Techniques: Jet Grouting Columns;
Micropiling; Concrete Walls; Inclinometers
• Quantities: 1,200 lm Jet grouting Columns;
1,500 lm Micropilies; 1,800 m3 Concrtee;
6,000 m3 Excavation Earth works
• Maximum Depth of Excavation: 14,0m
Jorge Cabaco Portfolio l Chartered Professional Engineer
RETAINING WALLS l JET GROUTING DOUBLE FLUID l REINFORCED
WITH MICROPILING
DEEP EXCAVATION VIRIATO STREET l LISBON l PORTUGAL EUROPE
13. 13
• Location: Lisbon Portugal / 2002
• Client: REFER E.P. – Rail Way
Portuguese Public Company
• Geotechnical Contractor: Keller Group
• Consultant: COBA Engineering &
Environmental Consultants
• Role: Ground Engineering Project
Manager
• Application: Rail Wail / Retaining Walls
• Techniques: Permanent Ground Strand
Anchors 450-750 kN; Drains
• Quantities: 8,600 lm G round Anchors
• Maximum Drilling depth: 28,0m
Jorge Cabaco Portfolio l Chartered Professional Engineer
RETAINING WALLS l GROUND PERMANENT ANCHORS
RAIL WAY NORTH LINE l AREEIRO l LISBON l PORTUGAL l EUROPE
14. 14
• Location: Lisbon Portugal / 2006
• Client: Construsan / Private
Company
• Geotechnical Contractor: Keller
Group
• Role: Ground Engineering Project
Manager
• Application: Underpinning
Reinforcement Foundations
• Techniques: Jet Grouting Columns Ø
1000mm;
• Quantities: 10,500 lm
• Maximum Drilling ldepth: 50,0m
Jorge Cabaco Portfolio l Chartered Professional Engineer
UNDERPINNING JET GROUTING FOUNDATIONS REINFORCEMENT
WAREHOUSE CHRONOSPOST l LISBON l PORTUGAL l EUROPE
15. 15
• Location: Alcacer do Sal, Portugal,
2008
• Client: IEP / Institute of Portuguese
Roads / Public Company
• Geotechnical Contractor: Opway
Engineering
• Role: Ground Engineering Project
Manager
• Application: Deep Foundations,
Bridges
• Techniques: Piling Ø 1200m;
Micropiling Ø 180mm
• Quantities: 240 lm Piling; 900 lm
Micropiling
• Maximum Drilling lengths: 34,0m
Jorge Cabaco Portfolio l Chartered Professional Engineer
DEEP FOUNDATIONS l PILING & MICROPILING
REHABILITATION OF STEEL BRIDGE l ADS l SOUTH LISBON l PORTUGAL l EUROPE
16. 16
• Location: Figueira da Foz,
Portugal, 2007
• Client: CELBI Paper
Manufacture
• Geotechnical Contractor:
Opway Engineering (Design &
Construction)
• Role: Ground Engineering
Project Manager
• Application: Deep Foundations,
Soils Improvements
• Techniques: Bored Piles Ø
800mm; Micropiling Ø 150mm;
Stone Columns 800mm
• Quantities: 900 lm Piles; 400
lm Micropiling ; 10,800 lm
Stone Columns
• Maximum Drilling Depths:
14,0m
DEEP FOUNDATIONS l PILING & MICROPILING l STONE COLUMNS
FACTORY PAPER CELBI l FIGUEIRA DA FOZ l PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
17. 17
• Location: Lisbon, Portugal, 2007
• Client: Metropolitano de Lisboa, Public
Company
• Geotechnical Contractor: Opway
Engineering
• Consultant: Professor Antonio Mineiro
• Role: Ground Engineering Project Manager
• Application: Soils Improvement
• Techniques: Jet Grouting Columns Ø
2000mm; Bentonite Piles Ø 1500mm
• Quantities: 1,000 lm Jet Grouting Columns ;
2,500 lm Bentonite piles ;
• Maximum Drilling Depths: 60,0m
JET GROUTING l PILING
TUNNEL TERREIRO DO PACO l LISBON l PORTUGAL l EUROPE
Jorge Cabaco Portfolio l Chartered Professional Engineer
18. 18
• Location: Figueira da Foz, Portugal, 2007
• Client: REFER, Rail Way Public Company
• Geotechnical Contractor: Opway Engineering (Design & Construction)
• Consultant: GSG – Gabinete de Servicos Geotecnicos
• Role: Technical/Project Manager
• Marine works repair of foundations pillars; installation of micro concrete piles and application of sacrificial steel formwork reinforced with
steel mesh SL81 trough the foundation pillars;
• core drilling vertical and inclined (SPT’s, Vane tests, lab tests Atterberg Limits, triaxial testing) for geotechnical analysing & low pressure
grout injections reinforcing with steel bars,
• monitoring instrumentation using surveying marks on the pillars
Jorge Cabaco Portfolio l Chartered Professional Engineer
LOW PRESSURE GROUTING l PERMANENT PROTECTION TO FOUNDATIONS
AND MICROCONCRETE POUR
REMEDIATION WORKS TO BRIDGE PILLARS l FDF l CENTRAL PORTUGAL l EUROPE
19. 19
• Location: Newcastle, Australia,
2008
• Client: ADCO
• Geotechnical Contractor: Menard
Bachy
• Role: Ground Engineering Project
Manager
• Application: Mine Filing Grouting
• Techniques: Grouting
• Quantities: 4,900 lm Drilling ;
7,500 m3 low and High Mobility
Grout;
• Maximum Drilling Depths: 70,0m
LOW AND HIGH MOBILITY GROUTING l MINE SUBSIDENCE GROUTING
STEEL STREET COMERCIAL BUILDING l NEWCASTLE l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
20. 20
• Location: Gold Coast, Austalia,
2009
• Client: Jupiters Casino
• Geotechnical Contractor: Menard
Bachy (Design & Construction)
• Consultant: Hyder Consulting
• Role: Ground Engineering Project
Manager
• Application: Underpinning
• Techniques: Jet Grouting single
fluid
• Quantities: 6,800 lm Jet Grouting
Columns; 600mm diameter
• Maximum Drilling Depths: 10,0m
UNDERPINNING JET GROUTING SINGLE FLUID
JUPITERS CASINO l GOLD COAST l QUEENSLAND l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
21. 21
• Location: West Angelas, Pilbara,
WA, Austalia, 2011
• Client: Rio Tinto
• Geotechnical Contractor: Geovert
(Design & Construction)
• Role: Operations Manager
• Application: Slope Stabilization
• Techniques: Rock Bolts & Tecco
Mesh
• Quantities: 18,000 m2 Tecco
Mesh
SLOPE STABILIZATION l TECCO MESH
MINE SITE l WEST ANGELAS l PILBARA l WA l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
22. 22
• Location: Sino Iron Ore, Pilbara, WA, Australia, 2010
• Client: Sino Ore
• Consultant: Coffey
• Geotechnical Contractor: Geovert
• Role: Operations Manager
• Application: Slope Stabilization
• Techniques: Rock Bolts & Pressure Grout TAM
SLOPE STABILIZATION l ROCK BOLTS l REMEDIATION WORKS
MINE SITE l SINO ORE l PILBARA l WA l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
23. 23
• Location: ACT, Austarlia, 2009
• Client: MacMahons
• Geotechnical Contractor: Geovert
• Consultant: SMEC
• Role: Operations Manager
• Application: Dam
• Techniques: Ground Anchors
• Quantities: 5 Anchors
• Maximum Drilling Depths: 35,0m
GROUND PERMANENT ANCHORS
BLOWERING DAM l ACT l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
24. 24
• Location: ACT, Australia, 2011
• Client: Bulk Water Alliance JV – John Holland / ABI Group
• Geotechnical Contractor: Geovert
• Consultant: GHD
• Role: Ground Engineering Business Manager
• Application: RCC Dam
• Techniques: Curtain Grout
• Quantities: 4,500lm drilling grout holes; 6,876 lm drainage holes
• Maximum Drilling Depths: 48,0m
PRESSURE GROUT l CURTAIN GROUT
COTTER DAM l MAIN DAM FOUNDATION l ACT l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
25. 25
• Location: Sydney Australia / 2014
• Client: Deicorp
• Geotechnical Contractor: SFL Piletech
• Consultant: Smart Engineering
• Role: NSW Manager
• Application: Commercial Building
• Techniques: Contiguous CFA Piling
• Quantities: 6,800lm; 600mm diameter
• Maximum Drilling Depths: 16,0m; Socket CL III Rock Strength
Rock
SHORING SYTEM l CONTIGUOUS CFA PILING WALL
ST. BASIL’S COLLEGE l RANDWICK l SYNDEY l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer
26. 26
• Location: Cooks Hill, Newcastle, Australia / 2014
• Client: Graph Building
• Geotechnical Contractor: SFL Piletech
• (Design & Construction)
• Consultant: Northrop
• Geotechnical Report: Coffey
• Role: NSW Manager
• Application: Residential Apartments
• Techniques: Deep Screw Piles
• Quantities: 7,000lm ; 1diameter 68-219-273mm
- ULT Geotechnical <1475 KN
• Maximum Drilling Depths: 30m, Piles Drive to
deep rock
STEEL FOUNDATIONS l DEEP SCREW PILES
ECLIPSE APARMENTS l COOKS HILL l NEWCASTLE l AUSTRALIA
Jorge Cabaco Portfolio l Chartered Professional Engineer