This document is a curriculum vitae for Isiwu Emmanuel Uchenna. It summarizes his experience as a Rigger Foreman and Coating Application Technician since 1993, working on dynamically positioned derrick/lay barges in Nigeria, West Africa, the Gulf of Mexico, and Brazil. It also provides details of his education, qualifications, training, skills, and referees.

1. CURRICULUM VITAE
INTRODUCTION
I have been working as an Experienced Rigger since 1993 at many locations within
Nigeria and around African countries. As a Rigger Foreman and Coating Application
Technician, with a dynamically positioned derrick/lay barges, the barge is the ideal
barge for pipe lay and construction activities in deep water fields. Equipped with both
“S” and “J” configuration & pipe lay capabilities, in excess of 1000 tons and also
perform tie – in and support functions. In West Africa, the Gulf of Mexico and Brazil.
The work has ranged from ships and barges. Installation of pipeline in Oil/Gas fields,
platforms, decks, jackets, risers. Etc.
Personal Details
Name: Isiwu Emmanuel Uchenna
L.G.A: Nsukka
State of Origin: Enugu State
Nationality: Nigeria
Date of Birth: 4TH April 1963
Religion: Christian
Contact Address:
Home Address: No 3 Omamoh Close Off Refinary Road Effurun-
Warri Delta State.
Mobile: +2348034743220,
+2348024646903,+2348052311784
Email Address: isiwuemm5boys@yahoo.com
Marital Status: Married

2. Attributes:
 Efficient
 Motivated
 Accurate
 Term Player
 Approachable
 Assertive
 Professional
 Enthusiastic
Educational Section
1973 - 1986 Standard Grades attained in English,
Mathematics, Biology, Economics, Commerce,
Literature in English, Agric. Science, Christian
Religious Knowledge and Government.
Education/Qualification
1973 – 1986 First School Leaving Certificate, SSCE/GCE
Ordinary Level.
Relevant Experience:
Dec. 6th
2011 – Date
Client; Total Upstream Companies in Nigeria USAN
Deep Water Development Project
(Deep Water District)
Company: Aldelia Nigeria Limited
Project: USAN Deep water Development Project
(Hook up Installation Project)
Vessel: USAN FPSO
Position: Rigger/Foreman (Marine Crew)
Duties: Deck Operations, Rigging & Lifting operations
General Marine Operations
March – August 2011
Client; Addax Petroleum (Nig) Ltd.
Company: Compact Manifold & Energy Services (CMES)
Project: Adanga Redevelopment Project TB-1921
Phase II,III & TPU Hook up Upgrade
8”Pipeline from 6w1 -7w1, 8” Pipeline from
AD31 –AD-22, 8” Pipeline from 7w1 -AD22

3. Installation & hook up of ADSI water injection
facility (120T)
Installation of KTMB platform (220ton) Hookup
TMMP Deck extension and upgrade
Vessel OPI International (ALB332 Derrick Lay Barge)
Ekulo Tornadoes, Hercules Jackup barge
(Tiger fish)
Position Rigger/Foreman
Duties Rigging and Lifting Operations, Installation of
Spools, Mechanical fittings, Installation of ball
valves, pipe handling & manifolds.
April – July 2009.
Client; Addax Petroleum (Nig) Ltd.
Company: West African Oilfield Services (WAOS).
Project: Adanga Redevelopment Project (HOOK-UP).
Vessel: Donaux Barge.
Position: Rigger “A”
Description: Rigger/Coater
Duties: Pipe Handling, Installation of Risers, Spools,
Installation of ball valves, hot boltings, manifold,
General Rigging and Lifting Operations.
January– March 2008
CLIENT: Exxon Mobile
Company: Acergy Globestar Engineering co. (Nig) Ltd.
Project: Green Field Project Nigerian Water
Vessel: Acergy Polaris Derrick Lay Barge
Position: Rigger “A”/Coater
Description: Employed as Rigger/Coater.
Duties: Pipe handling, rigging and lifting and lifting
operations including installation of jackets,
bridges.
April –July 2008
Client: Chevron (Angola)
Company: Acergy Globestar Engineering co. (Nig.) Ltd.
Project: Tombua Landana
Vessel: Acergy Polaris Derick Lay Barge.
Position: Rigger “A”
Description: Employed as Rigger/Coater.
Duties: Pipe handling, rigging and lifting operations
including installation of sub-sea structures, manifolds, riser spools, jumpers, templates
18” and 14” pipe laying in S-Lay mode. Etc.

4. May- June 2007
Client: Total FinaElf E&P Congo
Company: Acergy Globestar Engineering Co.(Nig) Ltd.
Project: Moho Bilondo
Vessel: Acergy Polaris Derick Lay Barge (DP)
Position: Rigger “A”
Description: Employed as Rigger/Coater
Duties: Pipe handling, Rigging and lifting operations,
flow lines installations 37Km x 16” pipeline,
laying in S-lay mode. General deck rigging. Etc.
June –August 2007
Client: British Petroleum (BP) Angola
Company: Acergy Globstar Engineering Co. (Nig.) Ltd.
Project: Greater Plutonio Block 16 Angola
Vessel: Acergy Polaris DLB (DP)
Position: Rigger “A”/Coater
Description: Employed as Rigger/Coater
Duties: Pipe handing, Rigging and liftling operations,
deployment of Subsea structures, manifolds,
jumpers, steel catenary risers, piles FFA,ILT)
Laying in stay mode riser protectors, 16” pipe
line S-lay mode. 1400m depth. Oil offloading
line (OOL) from buoy to FPSO. Flow line
installation in J-lay mode. Jumpers installation.
August –October2007
Client: Total E &P Congo
Company: Acergy Globestar Engineering Co. (Nig.) Ltd
Project: Total
Vessel: Acergy Polaris Derrick Lay barge (DP)
Position: Rigger “A”
Description: Employed as Rigger/Coater.
Pipelines.
Duties: pipe handling, rigging and lifting operations, 16”
8” and 6”pipelaying in S-lay mode. Flow
lines installation in J-lay mode with subsea
structure installation (suction pipe, FTA, ILT),
spools and jumpers installation, oil offloading
line (OOL) from buoy to FPSO)laying in S-lay
mode.
July 2005

5. Client: Total EPC 2B Nigeria
Company: Stolt Offshore SA Globstar Engineering Co.
(Nig.) Ltd.
Project: EPC 2B
Vessel: Seaway Polaris/Seaway Legend.
Position: Rigger “A”
Description: Employed as Deck Rigger.
Duties: Rigging and lifting operation, lowering concrete
mats over pipelines and in water survey.
Conventional Project
2005 -2006
Client: Chevron Angola
Company: Acergy Globestar Engineering (Nig.) Ltd.
Project: Benguala Belize
Vessel: Acergy Polaris Derick Lay Barge
Position: Rigger “A”
Description: Employed as Rigger/Coater
Duties: pipe handling, rigging and lifting operations
(100km of pipe laying in S-lay mode from depth
of 15m to 400m).
2006
Client: Elf Nigeria
Company: Acergy Globestar
Project: Amenam II
Vessel: Acergy Polaris Derick Lay Barge.
Position: Rigger “A”
Description: Employed as Rigger/Coater.
Duties: pipe handling, rigging and lifting operations
(Lifting 600tone jactet +heavy lift of 700tone,
and 80km pipe laying in depth of 30m)
March 2006
Client: Exxon mobile (FPSO ERHA) Nigeria
Company: Stolt Offshore Globestar Engineering Co. (Nig.)
Ltd.
Project: FPSO ERHA
Vessel: Seaway Polaris/Seaway Legend
Position: Rigger “A”
Description: Employed as Deck Rigger
Duties: Rigging and lifting operation installation of a
mooring bouy SBM and IWS Subsearigging, tie
in pipe line and risers.
June 2006
Client: Chevron Nigeria
Company: Acergy Globstar Engineering Co. (Nig.) Ltd.

6. Project: EPC 2B
Vessel: Acergy Polaris Derick Lay Barge
Position: Rigger “A” / Coater.
Description: Employed as Rigger/Coater.
Duties: pipe handling, rigging and lifting operations
(100m long bridge of 700tone, and 80km of pipe
laying in depth of 30m
August 2006
Client: Exxon Mobile
Company: Acergy Globestar
Project: Erha Project in Nigeria
Vessel: Acergy Polaris Derick Lay Barge
Position: Rigger “A”
Description: Employed as Rigger/Coater
Duties: Pipe handing, rigging and lifting operations,
Depth 1200m FPSO and buoy mooring lines
deployemtn (suction anchor +chain+cables) <
manifolds, jumpers, subseastructure installation.
SCR (steel catenary risers) from SHO pile to
FPSO (flexjoint hand-over to FPSO)laying in
slay mode, Riser protectors forFPSO risers
installation.
2000– 2001
Client: Total Angola
Company: Stolt Offshore SA Globstar Engineering Co.
(Nig) Ltd.
Project: Girassol Angola
Vessel: T.S.VSeaway Explorer
Position: Rigger: A”/Coater.
Description: Employed as Deck Rigger.
Duties: Lifting operations and General Riggings, towing
boundless from soyo beach to Girassol field,
towing three riser tower from Lobito Beach to
Girassol field and installation of the riser tower
in water depth of 1,400m fully monitored by
ROV.
2000 – 2001
Client: Total Angola
Company: Mc Dermott ETPM Globstar Enginering Co.
(Nig.) Ltd.
Project: Girassol Angola
Vessel: Seaway Polaris Derrick Lay Barge

7. Position: Rigger “A”/Coater.
Description: Employed as Rigger/Coater
Duties: First deep sea project for Mc demott ETPM in
water dept of 1,400m. Pipe handing and lifting
operations – first pipe laying in J- lay mode, first
deep sea operations fully monitored by ROVS.
Mooring line deployment and connection of
FPSO, three riser tower installations under water
manifolds, spools, subseastructures installations.
2001 – 2002
Client: Total Angola
Company: Stolt Offshore SA (Globstar Co. (Nig) Ltd.
Project: Girrassol Angola
Vessel: T.S.VSeaway Explorer
Position: Rigger “A”
Description: Employed as Deck Rigger
Duties: Lifting Operations and Rigging. Tie-in
operations fully montored by ROV and
transpnder.by MATIS tie-in machine. (Moodle
Advance Tie-in in system)
August 2002
Client: Chevron Texaco
Company: Acergy Globestar
Vessel: Acergy Polaris Derrick Lay Barge
Position: Rigger “A” / Coater
Description: Employed as Rigger/Coater
Duties: 30m to 700m water dept of pipe lay in S-lay
mode, installation of catenaries riser supports.
2003
Client: Chevron Texas
Company: Acergy Globestar
Project: Sanha Project Equatorial Guinea
Vessel: Acergy Polaris Derrick Lay Barge
Position: Rigger “A”
Description: Employed as Rigger/Coater
Duties: Jacket launching offshore: 700ton lift and
1000ton under the crane during upending in the
water.
Heavy pipe driving (200ton).
Training
Oct. 2014 UPSTREAM NIGERIA – Exxon Mobil

8. Offshore Emergency ResponseTeam Training
Module 2 – Permit holder/in work management
system + electronic permit to work/Global
Operation PBP Work Management System
(System 6-4 owner) Nov. 2013
Certified Banksman/Basic Rigger and Slinger
training in compliance with API-RP2D.3.1.4
Nov. 3rd 2014
Offshore Safety Training Centre
Certificate of Training – (T-BOSIET)
16th
– 18 May, 2012
*Helicopter Underwater EscapeTraining
(HUET)
* Survival at Sea (SAS) Course
* Basic First Aid (BFA)
* Basic Fire Fighting (BFF)
* Induction Course
CHARKINS MARITIME TRAINING
CENTRE
Elementary First Aid & Training Course
Personal Survival Techniques Training Courseat
the Charkins Maritime Training Centre, (Port
Harcourt, Nigeria) in accordancewith Section A-
V1/1-3 of the Revised STCW convention (1995)
Fire Prevention & Fire Fighting Techniques
Personal Survival Techniques Training Courseat
the Charkins Maritime Training Centre, (Port
Harcourt, Nigeria) in accordancewith Section A-
V1/1-2 of the Revised STCW convention (1995)
Personal, Safetyand Social Responsibilities
Training Course
Personal Survival Techniques Training Courseat
the Charkins Maritime Training Centre, (Port
Harcourt, Nigeria) in accordancewith Section A-
V1/1-4 of the Revised STCW convention (1995)
2010 Personal Survival Techniques Training Courseat
the Charkins Maritime Training Centre, (Port

9. Harcourt, Nigeria) in accordancewith Section A-
V1/1-1 of the Revised STCW convention (1995)
2003 Elementary First aid training courseat the
Regional maritime Academy (Accra Ghana) in
accordancewith section A-VI 1 – 3 of the revised
STCW Convention (1995).
Fire prevention & Fire fighting training courseat
the regional maritime Academy (Accra Ghana) in
accordancewith section A-VI/1-2 of the revised
STCW Convention (1995).
Personal Survival techniques Training Course at
the regional maritime Academy (Accra Ghana) in
accordancewith section A-VI 1-1 of the revised
STCW Convention (1995).
Personal Safety and Social Responsibility course
at the regional maritime Academy (Accra Ghana)
in accordancewith section A-VI 1-4 of the
revised STCW Convention (1995).
2004. The ContractorEmployee HSE course(Level 3)
(SPDC) Accredited HSE Consultant).
2004 Familiarization training on company procedure
GR-OPS-008“lifting Equipment lifting
operations on ships and barges (E.M.T.A)
approved D32/D33 Assessor.
2004 Has attended a safety and awareness Rigging and
lifting course. (E.M.T.A) Approved D32/D33
Assessor(Acergy Offshore).
2004 Rescue team leader Course/HSE, Hold on DSV
Acergy Polaris.
2005 IMCA- Introduction to working at height
technique and inspection of PPEtraining course.
2006 The contractorHSE Trainer and Consultancy
Services. (Rigger training Course). Has
successfully completed Rigging training course
organized in conjunction with Nigerian institute
of Safety professionals.
Course Contents

10.  Rigging and Material Inspection
 Determining Safe working Load
 Communication at Work
 Safe Material Handling…
2006 HSES Training and SupportServices African and
Mediterranean Region. (Offshore Safety Training
Course) has positively participated to the Acergy
behaving safety held in Acergy Polaris with
Acergy.
2009 Offshore Safety/First Aid Training Course.
Has positively participated to the first Aid
Training Curse held in Donaux Barge organized
by West African Oilfield Services (WAOS).
POSITION: RIGGER FOREMAN
Other Experience:
Safety Experience (Safety Officer), Scaffoldings
Technician, Coating Application Technician.
Socialskills and hobbies:
I enjoy working outdoors mostof the time; my hobbies are traveling, reading and
watching football.
Referees:
MR. CHRIS OZEGBE
Personal Manager
Acergy Globestar Engineering Co. (Nig.) Ltd.
Warri
Tel: +2348037081170.
MR. AWE ABAYOMI
Director / CEO
Walad Nig. Enterprises
No 281 Warri Sapele Road by First Marine Gate
Warri,Delta State, Nigeria.
+2348038103892
MR. ANDY GEORGE
Sparrows Offshores
Email: morph042@aol.com