This document outlines the education and experience of an instrumentation and control engineer. It details their educational background including an Instrumentation and Control Engineering Technology program degree from Lambton College as well as various training programs. It then outlines the applicant's skills and over 10 years of experience in instrumentation and control roles for various companies including Emerson, Siemens, Shanghai Automation Instrumentation, and Ontario Power Generation. Their most recent role is as a Process Control and Automation Specialist for Chemtura.
1. EDUCATION
Lambton College, Sarnia, ON
09/2007- 12/2010
Instrumentation and Control Engineering Technology Program
3 years Dean's Honor
Canadian Process Control Association Award
International Society of Measurement & Control Award
Emerson DeltaV Training, Austin, TX, US
11/2015
DeltaV SIS Implementation (Course7305)
Matrikon OPC Training, Online
12/2014
Open Platform Communication (OLE for Process Control) Level 1-3
Emerson DeltaV Training, Austin, TX, US
02/2012
DeltaV Distribution Control System Batch Application (Course7016)
Emerson DeltaV Training, Mississauga, ON
04/2011
DeltaV Distribution Control System Configuration and Programming (Course7006)
SIEMENS Training Center, Karlsruher, Germany
10/2002 - 12/2002
TelePerm XP Distribution Control System Configuration and Programming
Shanghai Automation Instrumentation CO., LTD., Shanghai, China
05/1995 - 10/1995
MAX1000 DCS configuration
Southeast University, Nanjing, China
08/1990 - 06/1994
Bachelor degree in Produce Process Automation
SKILLS AND QUALIFICATIONS
QUALIFICATIONS
10+ years working experience in Instrumentation & Control field
Bachelor degree of Produce Process Automation Control
Advance Diploma of Instrumentation and Control Engineering Technology
Ontario Interprovincial Industrial Electrician Certification (red seal, 442A)
2. SKILLS
Advanced skills in DeltaV DCS include AMS (Asset Management System)
Advanced skills in motor control, actuator, pneumatic / hydraulic system, measuring
instruments and analyzer
Advance skills of bus instruments: Fieldbus, Porfibus, Modbus and Asi-bus
Excellent instrument and control system trouble shooting skill
Experience of data communication between different control system by OPC
Abundant experience of instrument installation and cable wiring
Solid knowledge and abundant experience of process control, batch control, PID
tuning
Fundamental electronic knowledge and soldering skill
Knowledge of blueprint, P&ID, flow sheet, function control diagram, electrical logic
diagram, DCS / PLC program, Robot program
Knowledge of instrumentations and control valve sizing, exchanger temperature
calculation
Computer skills of Networking, Wireless, AutoCAD, MS office, multiSIM, Flowscan,
Matlab,FIELDVUE, Instrument Toolkit, Experion, FoxboroI/A configuration and PC
hardware
Knowledge of Statistic Process Control, and Safety Instrumented System and
Safety Integrity Level analysis.
Focus on work performance and safety, accountable and good team-player
RELATED EXPERIENCE
Chemtura, Global, base in Elmira, Ontario, Canada
08/2013- presentProcess Control and Automation Specialist
Woke in project team enterprise wide: R&D Naugard Truck project; Amboy Perth
(New Jersey) silo project; Amboy Perth salt project ; Elmira Naugard control system
migration project; Elmira offsite well control system migration project; Fords (New
Jersey) control system migration project; Nantong(China) grease project; Nantong
ester project; Nantong urethane project; Westhill (Toronto)sulfuric acid innovation
project; Bay Minette (Alabama) emission project
DeltaV configuration and graphic
Workstation, control network and firewall setup
Learn and understand process by reading control narratives, discussing with
process engineers and operators, or interpreting loop drawings and electrical
drawings, or interpreting program from old control system
Factory acceptance test, site acceptance test, control system installation, test and
commissioning, startup support
New instrument selection, installation, configuration, test and commissioning
Initiate and modify loop drawings and electrical drawings
Help trouble shoot when instrument technicians have difficulties
Chemtura, Elmira, Ontario, Canada
3. 06/2012- 08/2013Instrumentation Technologist
02/2011- 06/2012Instrumentation Mechanic
Calibrate, replace and troubleshoot various of instrumentations and valves
Sizing, configuring, installing, programming and test & commissioning various
instrumentations with DeltaV DCS
Select instrumentations for new installation, get quote and purchase via SAP
Batch process programming with DeltaV DCS
Carry page perform on call duty
Ontario Power Generation Pickering A Nuclear, Pickering, Canada
05/2010- 08/2010
Coop Student, control maintenance department, Fix It Now crew
Assist to calibrate, replace and troubleshoot various of instrumentations, motors,
MCCs, fire alarm system and other nuclear safety systems.
Very familiar with electrical control logic drawing.
Outstanding knowledge of using SAP / Passport software.
Ontario Power Generation Darlington Nuclear, Bowmanville, Canada
05/2009 - 12/2009
Coop Student, control maintenance department, valve crew, monitor crew and Fix It
Now crew
Assist to calibrate, replace and troubleshoot various of instrumentations, such as
TC, RTD, flow and pressure transmitters, CO2, O2, PH, sodium and conductivity
analyzers, radioactivity monitors, ground fault sensors, and field control panels, and
so on.
Assist to calibrate pneumatic control valves, include valve and valve accessories
assembly, tubing, mechanical fixtures modification and using FlowScan valve
calibration software.
Properly handle tools, meters, test kits and safety equipments.
WaiGaoQiao Power Generation Company, Shanghai, China
08/1994 - 02/2003
Instrumentation and Control technician and engineer
Install I/O modules and their related facilities, cables wiring and test & commission
for Distribution Control System (DCS)
Maintain and replace power supply modules, electrical accessory equipments of
power distribution panels, MCC and external relay panels
Tune PID parameter of process control loop, override signals and modify program
on DCS workstation
Maintain field control panels for heavy duty motor such as fans, mills, pumps,
compressor and their field lubrication oil stations
Maintain various field control panels
Cable connection, calibration, disassembly, assembly and troubleshooting for
pneumatic and motor-driven valves, and their actuators (including open/closed type
and modulate type). Replace and maintain air pressure gauge, solenoid valve, limit
4. switch, I/P transducer, M/P transducer (transfer pulse signal into 3-15psi), positioner,
feedback indicator and fail safe position holding device
Calibrate and replace various instruments and electrical components, such as
switches, transmitters (including HART protocol based smart transmitter), sensors,
analyzers, TCs, RTDs and gauges, etc.
Technical specification of Bidding document writing (Instrument & Control Island
part of WaiGaoQiao 2*900MW project)
Undivided attention to detail of bid document
Technical documents examination and revision, changes clarification
Participate Design Liaison Meetings of Instrument & Control Island, Boiler Island,
Turbine Island and Flying Ash Island, writing the minutes of meeting. Take charge in
the 3rd Design Liaison Meeting of Flying Ash Island
Inventory Control
Take part in control system equipment FAT (Factory Acceptance Test)
OTHER EXPERIENCE
Lambton College, Sarnia, ON 09/2008 - 12/2010
Peer Tutor
Cam-Slide Mfg. (a division of Magna), Newmarket, ON 05/2004 - 08/2006
Assembly Operator
Lightning Rotor Inc., Concord, ON 04/2003 - 01/2004
Order Picker