Engineers are often faced with construction of pavement structures over soft and highly compressible subgrade. Such conditions render the structures unable to withstand the required design loads and susceptible to high settlements with associated excessive distress, leading to pavement damage. Because using imported quality fill to improve the load-bearing capacity of the subgrade has limited benefits, an alternative construction approach is needed to ensure the required strength of the soil structure is reached. The use of geosynthetics in soil to improve bearing capacity and stability offers a better alternative to imported fill. This research was conducted to determine the degree of improvement of the load-bearing capacity and reduction in settlement as a result of the geosynthetic reinforcement of soft clay overlain by granular material. Compression tests on the unreinforced clay subgrade and geosynthetic-reinforced two-layered soil composite were conducted at bench-scale using a Universal Compression Machine at the University of Cape Town Geotechnical Engineering Laboratory. The geosynthetic products used to reinforce the soil structure in this study included geogrids and geotextiles. The reinforcement layer was placed alternatively within the layer of granular material and at the interface of the soil and a range of fill thicknesses and depths of placement were tested to determine their influence on mobilized strength. The use of these composites could potentially lead to reduced construction costs as a result of less aggregate material used, an extension in the design life of the pavement structure and, consequently, a reduced necessity for maintenance work.
124
مبادرة
#تواصل_تطوير
المحاضرة ال 124 من المبادرة مع
دكتور/ محمد الحسين
بعنوان
المركبات البوليمرية الجيوتقنية و تطبيقاتها في الهندسة المدنية
Geosynthetics in Civil Engineering (Multifunctional uses of geosynthetics in civil engineering)
التاسعة مساء توقيت القاهرة
العاشرة. مساء توقيت مكة المكرمة
السبت 28 أغسطس 2021
وذلك عبر تطبيق زووم
https://us02web.zoom.us/meeting/register/tZwvdeiurjwjHdKFHkNf1hWghC8-OT7ZB2lZ
علما ان هناك بث مباشر للمحاضرة على القنوات الخاصة بجمعية المهندسين المصريين
ونأمل أن نوفق في تقديم ما ينفع المهندس ومهمة الهندسة في عالمنا العربي
والله الموفق
للتواصل مع إدارة المبادرة عبر قناة التليجرام
https://t.me/EEAKSA
ومتابعة المبادرة والبث المباشر عبر نوافذنا المختلفة
رابط اللينكدان والمكتبة الالكترونية
https://www.linkedin.com/company/eeaksa-egyptian-engineers-association/
رابط قناة التويتر
https://twitter.com/eeaksa
رابط قناة الفيسبوك
https://www.facebook.com/EEAKSA
رابط قناة اليوتيوب
https://www.youtube.com/user/EEAchannal
رابط التسجيل العام للمحاضرات
https://forms.gle/vVmw7L187tiATRPw9
ملحوظة : توجد شهادات حضور مجانية لمن يسجل فى رابط التقيم اخر المحاضرة.
92
مبادرة
#تواصل_تطوير
المحاضرة الثانية والتسعون من المبادرة مع
الاستاذ الدكتور / نبيل السيد الإمام
استاذ الهندسة المدنية(الجيوتقنية)
بعنوان
"خيارات التأسيس في التربة الانتفاخية"
" Foundation Options in Expansive Soil"
الثامنة والنصف مساء توقيت مكة المكرمة
السابعة والنصف توقيت القاهرة
الإثنين 07 ديسمبر 2020
وذلك عبر تطبيق زووم
Meeting ID: 819 8588 7363 https://us02web.zoom.us/meeting/register/tZUkf-ygpjwpHNfw4klN5to3joHhpLWn7y-L
علما ان هناك بث مباشر للمحاضرة على وقناة يوتيوب
https://www.youtube.com/user/EEAchannal
للتواصل مع إدارة المبادرة عبر قناة تيليجرام
الرابط
https://t.me/EEAKSA
رابط اللينكدان والمكتبة الالكترونية
www.linkedin.com/company/eeaksa-egyptian-engineers-association/
رابط التسجيل العام للمحاضرات
https://forms.gle/vVmw7L187tiATRPw9
This presentation discussed geosynthetic reinforcement used for highway shoulder widening and rehabilitation. Prepared by Stephen Archer of Tensar International Corporation. Please remember to cite this research if the information you find here is used.
124
مبادرة
#تواصل_تطوير
المحاضرة ال 124 من المبادرة مع
دكتور/ محمد الحسين
بعنوان
المركبات البوليمرية الجيوتقنية و تطبيقاتها في الهندسة المدنية
Geosynthetics in Civil Engineering (Multifunctional uses of geosynthetics in civil engineering)
التاسعة مساء توقيت القاهرة
العاشرة. مساء توقيت مكة المكرمة
السبت 28 أغسطس 2021
وذلك عبر تطبيق زووم
https://us02web.zoom.us/meeting/register/tZwvdeiurjwjHdKFHkNf1hWghC8-OT7ZB2lZ
علما ان هناك بث مباشر للمحاضرة على القنوات الخاصة بجمعية المهندسين المصريين
ونأمل أن نوفق في تقديم ما ينفع المهندس ومهمة الهندسة في عالمنا العربي
والله الموفق
للتواصل مع إدارة المبادرة عبر قناة التليجرام
https://t.me/EEAKSA
ومتابعة المبادرة والبث المباشر عبر نوافذنا المختلفة
رابط اللينكدان والمكتبة الالكترونية
https://www.linkedin.com/company/eeaksa-egyptian-engineers-association/
رابط قناة التويتر
https://twitter.com/eeaksa
رابط قناة الفيسبوك
https://www.facebook.com/EEAKSA
رابط قناة اليوتيوب
https://www.youtube.com/user/EEAchannal
رابط التسجيل العام للمحاضرات
https://forms.gle/vVmw7L187tiATRPw9
ملحوظة : توجد شهادات حضور مجانية لمن يسجل فى رابط التقيم اخر المحاضرة.
92
مبادرة
#تواصل_تطوير
المحاضرة الثانية والتسعون من المبادرة مع
الاستاذ الدكتور / نبيل السيد الإمام
استاذ الهندسة المدنية(الجيوتقنية)
بعنوان
"خيارات التأسيس في التربة الانتفاخية"
" Foundation Options in Expansive Soil"
الثامنة والنصف مساء توقيت مكة المكرمة
السابعة والنصف توقيت القاهرة
الإثنين 07 ديسمبر 2020
وذلك عبر تطبيق زووم
Meeting ID: 819 8588 7363 https://us02web.zoom.us/meeting/register/tZUkf-ygpjwpHNfw4klN5to3joHhpLWn7y-L
علما ان هناك بث مباشر للمحاضرة على وقناة يوتيوب
https://www.youtube.com/user/EEAchannal
للتواصل مع إدارة المبادرة عبر قناة تيليجرام
الرابط
https://t.me/EEAKSA
رابط اللينكدان والمكتبة الالكترونية
www.linkedin.com/company/eeaksa-egyptian-engineers-association/
رابط التسجيل العام للمحاضرات
https://forms.gle/vVmw7L187tiATRPw9
This presentation discussed geosynthetic reinforcement used for highway shoulder widening and rehabilitation. Prepared by Stephen Archer of Tensar International Corporation. Please remember to cite this research if the information you find here is used.
Geosynthetics are synthetic products used to stabilize terrain. They are generally polymeric products used to solve civil engineering problems. This includes eight main product categories: geotextiles, geogrids, geonets, geomembranes, geosynthetic clay liners, geofoam, geocells and geocomposites.
Geosynthetics- Types, and their use in Retaining WallsAbhishek Bharti
All you need to know about Geosynthetics, its types, uses etc. their uses in retaining walls have been focused...
The Best Presentation you can possibly find on Geosynthetics.
In this presentation you will find what is jute Geo-textile, how it is manufactured and application of jute Geo-textile. It contains some of the case studies from INDIA.
Introduction to Geosynthetics Types and Applications_Sirmoi WekesaSirmoi Wekesa
This presentation introduces the different types of Geosynthetics, their functions and applications. its very informative and will form a good foundation to anyone interested in this versatile technology.
Abstract Geotextiles have proven to be the most versatile and cost effective ground modification materials. Their use has extended rapidly into nearly all areas of civil, geotechnical, environmental, coastal and hydraulic engineering. They form the major component of the field of Geosynthetics, the others being geogrids, geomembranes and geocomposites. One of the growing alternatives in today’s context, with respect to growing environmental concern and carbon foot print generation, is the emergence of technical textiles made out of natural fibres which includes geotextile products for geotechnical applications, agrotextile products as well as other such relevant areas. Jute geotextile (JGT) can certainly be considered as a potential aspirant replacing majority of today’s popular synthetic products which are posing severe threats to our environment thereby adversely affecting the eco-congruity. For sustainable socio-economic development, applications and usable area of jute geotextile are in increasing trend. There is a wide scope for innovative and prospective use of jute geotextile followed by the design and engineering of the products, oriented as per the end-user requirements for different geotechnical applications. This will open up newer avenues for Jute, not only as a technical textile, but for the entire Jute Sector as it is environment friendly and its application is effective for protecting environmental degradation. Therefore, keeping in mind about the potential candidature of jute geotextile this paper has substantiated a detailed review on jute geotextile-its designing and manufacturing along with its characteristic features, end-use specific applications, advantages and eventually its techno-economic viability. Keywords: Geotextiles; Jute Geotextile; Geotechnical Engineering; Underlay; Overlay; Paving Fabric
Geosynthetics are synthetic products used to stabilize terrain. They are generally polymeric products used to solve civil engineering problems. This includes eight main product categories: geotextiles, geogrids, geonets, geomembranes, geosynthetic clay liners, geofoam, geocells and geocomposites.
Geosynthetics- Types, and their use in Retaining WallsAbhishek Bharti
All you need to know about Geosynthetics, its types, uses etc. their uses in retaining walls have been focused...
The Best Presentation you can possibly find on Geosynthetics.
In this presentation you will find what is jute Geo-textile, how it is manufactured and application of jute Geo-textile. It contains some of the case studies from INDIA.
Introduction to Geosynthetics Types and Applications_Sirmoi WekesaSirmoi Wekesa
This presentation introduces the different types of Geosynthetics, their functions and applications. its very informative and will form a good foundation to anyone interested in this versatile technology.
Abstract Geotextiles have proven to be the most versatile and cost effective ground modification materials. Their use has extended rapidly into nearly all areas of civil, geotechnical, environmental, coastal and hydraulic engineering. They form the major component of the field of Geosynthetics, the others being geogrids, geomembranes and geocomposites. One of the growing alternatives in today’s context, with respect to growing environmental concern and carbon foot print generation, is the emergence of technical textiles made out of natural fibres which includes geotextile products for geotechnical applications, agrotextile products as well as other such relevant areas. Jute geotextile (JGT) can certainly be considered as a potential aspirant replacing majority of today’s popular synthetic products which are posing severe threats to our environment thereby adversely affecting the eco-congruity. For sustainable socio-economic development, applications and usable area of jute geotextile are in increasing trend. There is a wide scope for innovative and prospective use of jute geotextile followed by the design and engineering of the products, oriented as per the end-user requirements for different geotechnical applications. This will open up newer avenues for Jute, not only as a technical textile, but for the entire Jute Sector as it is environment friendly and its application is effective for protecting environmental degradation. Therefore, keeping in mind about the potential candidature of jute geotextile this paper has substantiated a detailed review on jute geotextile-its designing and manufacturing along with its characteristic features, end-use specific applications, advantages and eventually its techno-economic viability. Keywords: Geotextiles; Jute Geotextile; Geotechnical Engineering; Underlay; Overlay; Paving Fabric
Performance Study on California Bearing Ratio Values using Geosyntheticsijtsrd
The main use of geosynthetics or geofabrics is ensured in any given geotechnical engineering work or application. Mahendra Kumar | Ajeet Singh "Performance Study on California Bearing Ratio Values using Geosynthetics" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38634.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/38634/performance-study-on-california-bearing-ratio-values-using-geosynthetics/mahendra-kumar
Utilisation of Waste Materials in the Construction Of RoadsIJERD Editor
Expansive soils are so widely spread that it becomes impossible to avoid them for highway construction to keep the network structure for mobility and accessibility. These soils are prevalent as large tracts in many parts of the world. Many highway agencies, private organizations and researchers are doing extensive studies on waste materials and research projects concerning the feasibility and environmental suitability. It is necessary to utilize the waste affectively with technical development in each field. Cyclic plate load tests were carried out on the tracks with optimum percentage of reinforcement materials like waste plastics and waste tyre rubber in gravel/flyash subbase laid on expansive subgrade. Test results show that maximum load carrying capacity associated with less value of rebound deflection is obtained for gravel/flyash reinforced subbase compared to unreinforced subbase.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Geosynthetics, a versetile solution to challenges in geotechnical engineeringeSAT Journals
Abstract This paper focuses on the available state of knowledge in the field of soil improvement particularly by the use of geosynthetics. Geosynthetics have found an important place in geotechnical engineering problems i.e. foundation on soft soils, land slide control, sub grade stabilization, reinforced embankments over soft soils, erosion control (turf reinforcement, under rip rap), surface drainage etc. This paper gives an overview of geosynthetics from its historical development to latest trends in it. Index Terms: Geosynthetics,
Modifications of construction materials have an important bearing on the building sector. Several attempts have been therefore made in the building material industry to put to use waste material products, e.g., worn out tyres, into useful and cost effective items. Success in this regard will contribute to the reduction of waste material dumping problems by utilizing the waste materials as raw material for other products. The present proposal involves a comprehensive laboratory study for the newer application of this waste material in the preparation of fibrous concrete. The primary objective of investigation is to study the strength behavior i.e. compressive strength, impact resistance of rubberized concrete with rubber chips. Volume variation of rubber chips with replacement to course aggregate. The proposed work is aimed to study the effect of volume of rubber chips on the compressive strength. Chetak A. Waghmare | Dr. P. P. Saklecha | Prof. M. M. Lohe "Experimental Study on Rubberized Concrete" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd43718.pdf Paper URL: https://www.ijtsrd.comengineering/structural-engineering/43718/experimental-study-on-rubberized-concrete/chetak-a-waghmare
Experimental Study on Bearing Capacity of Micro Grid Galam Wood Pile on Soft ...AM Publications
Construction on soft soil raises several issues. The low bearing capacity, high compressibility and the low permeability of the soft clay caused the problems both design and construction. While galam wood (Melaleuca leucadendra) have been used for many years as micro pile due to their durability and bearing capacity improvement, limited knowledge is available on performance of micro grid galam wood pile. The experimental study was conducted to analyze its bearing capacity and settlement of soft soil supported by micro grid galam wood pile. The study conducted on 2.00 x 3.00 x 2.00-meter concrete box container. Then the loading test on soft soil using two grid models such as square model and triangle model. The result shows that the use of grid modelled pile has significant role in increasing bearing capacity of soft soil. It increased approximately 500% of bearing capacity of soft soil. It is not significant bearing capacity improvement difference between square model and triangle model, however triangle model is better square grid model.
CIVIL SEMINAR REPORT :USE OF GEOGRIDS IN FLEXIBLE PAVEMENT. Geogrids can also prevent aggregate penetration into the subgrade, depending on the ability of the geogrid to confine and prevent lateral displacement of the base/sub-base. However, the geogrid does not prevent intrusion of subgrade soils up into the base/sub-base course,...
flexible pavement ppt
flexible pavement vs rigid pavement
rigid pavement
flexible pavement materials
flexible pavement design
flexible pavement of road construction
types of rigid pavements
flexible pavement construction
interesting civil engineering topics
civil engineering topics for presentation
civil seminar topics ppt
civil engineering seminar topics 2018
best seminar topics for civil engineering
seminar topics pdf
seminar topics for mechanical engineers
seminar topic for civil engineering pdf
DEVELOPMENT OF TODDLER FAMILY CADRE TRAINING BASED ON ANDROID APPLICATIONS IN...AM Publications
Toddler family cadre is a community members work voluntarily in fostering and providing information to parents of toddlers about how to properly care for children. Toddler Family cadre desperately need training to increase their skills. There are still a few Toddler family cadres who get training so that the knowledge and skills of parents and other family members in developing toddlers' growth through physical stimulation, motoric intelligence, emotional and social economy as well as possible are still lacking. The purpose of this study is to develop an Android- assisted Toddler family cadre training model in Demak. This research is research in tian research and development. The research location was in Demak Regency. Toddler family cadres became the object of this research. Development of Toddler family cadre training models assisted by Android in Demak is feasible to be used as an effort to improve Toddler Family cadres' capabilities.
TESTING OF COMPOSITE ON DROP-WEIGHT IMPACT TESTING AND DAMAGE IDENTIFICATION ...AM Publications
In recent years the use of composite materials in structural components has become increasingly common in a wide range of engineering applications. Composite materials offer numerous advantages over more conventional materials because of their superior specific properties, but a serious obstacle to a more widespread use of these materials is their high sensitivity to localized impact loading. This paper presents an experimental study to assess the impact response of drop weight impact tests on fiber reinforced polymer composites with deferent load and damage identification of composite using Non-destructive testing techniques ultrasonic testing (UT) C scan. In the study includes checking the strength of the specimen, plotting of graphs between the height and the impact energy obtained and tabulating the results after conducting the various functional tests.
THE USE OF FRACTAL GEOMETRY IN TILING MOTIF DESIGNAM Publications
In this paper I will present the use of fractal geometry to design tile motifs. A fractal is a geometric figure that combines the several characteristics among others: its parts have the same form as the whole, fragmented, and formation by iteration. The concept of fractals has been spread over all fields of sciences, technology, and art. This paper aims to provide an algorithm to creating motifs of tile algorithm for create the tile motif consists of base, iteration, coloration and duplication. In order to help the reader better understand the algorithm, I will present some script using Matlab. We describe a mathematically based algorithm that can fill a spatial region with sequence of randomly placed which may be transformed copies of one motif or several motifs. By using this algorithm, I can produce thousand variety of aesthetically pleasing tile motifs, of which we show a number of examples.
TWO-DIMENSIONAL INVERSION FINITE ELEMENT MODELING OF MAGNETOTELLURIC DATA: CA...AM Publications
Two-dimensional resistivity analysis of magnetotelluric data has been done at “Z” geothermal area which is located in southern part of Indonesia. The objective is to understand subsurface structure beneath reasearch area based on 2-D modeling of magnetotelluric data. The inversion finite element method were used for numerical simulations which requires discretization on the boundary of the modeling domain. The modeling results of magnetotelluric data shows relativity structure dissemination: 0-10 ohm.m in a thickness of 1 km (Clay Cap), 10-100 ohm.m with 1-2 km depth respectively (reservoir zone), and on a scale of 100-1000 ohm.m in a depth of 2-3 km (heat source zone). The result of relativity structure can be used to delineate an area with geothermal prospect around 12 km2.
USING THE GENETIC ALGORITHM TO OPTIMIZE LASER WELDING PARAMETERS FOR MARTENSI...AM Publications
To achieve the pre-set welding size, this paper presents the optimization of the constrained overlap laser welding input parameters for AISI 416 and AISI 440FSe stainless, thickness 0.5 mm. In this study, the proposed optimization algorithm is the Genetic Algorithm (GA). After training 10 times for 30 NP (population size), each training repeated 200 times, the results achieved as expected. The error is compared with the result of the affirmation experiment not exceeding 5%.
ANALYSIS AND DESIGN E-MARKETPLACE FOR MICRO, SMALL AND MEDIUM ENTERPRISESAM Publications
The Ministry of Cooperatives and Small and Medium Enterprises launched in 2018 the number of Micro, Small and Medium Enterprises (MSMEs) in Indonesia as many as 58.97 million people. It is predicted that the number of MSMEs players in 2019 will amount to 59.2 million. This shows that the Indonesian people have made changes in the field of family economics which initially as consumptive are now productive. The community prefers to carry out activities that can increase family income. Future MSMEs remain the mainstay of the national economy. In accordance with the government roadmap, in 2020 e-commerce transactions are predicted to reach Rp1,300 trillion or equivalent to USD130 billion. According to data from the Central Statistics Agency (BPS), the contribution of MSMEs to Indonesia's Gross Domestic Product (GDP) reached 61.41%, with the number of MSMEs reaching almost 60 million units. However, only around 8% or 3.79 million of the 59.2 million MSMEs players have used online platforms to market their products. Based on the above problems, researchers conducted research on the analysis and display of E-Marketplace for MSMEs in Indonesia. The type of research used is action research. The object of research is MSMEs which are under the Office of Industry and Trade of Sragen Regency. The method of data collection is by techniques: (1) interview, (2) documentation (3) observation, (4) literature study. The researcher uses the waterfall method in developing the system. The research team has successfully analyzed the E-Market place according to the results of data collection. The research team has succeeded in designing the E-Marketplace for MSMEs. E-Marketplace designed can be used by admin, MSME and user. Admin is in charge of managing E-Marketplace and has full access rights. MSMEs can register online and manage their products in E-Marketplace. Users or buyers can search data in E-Marketplace as desired. To make transactions, users can interact directly with MSMEs according to the data provided in E-Marketplace. E-Marketplace can be used for marketing together MSMEs products. This e-marketplace can be accessed at www.umkmonline.com
REMOTE SENSING AND GEOGRAPHIC INFORMATION SYSTEMS AM Publications
Remote sensing technology's increasing accessibility helps us observe research and learn about our globe in ways we could only imagine a generation ago. Guides to profound knowledge of historical, conceptual and practical uses of remote sensing which is increasing GIS technology. This paper will go briefly through remote sensing benefits, history, technology and the GIS and remote sensing integration and their applications. Remote sensing (RS) is used in mapping the predicted and actual species and dominates the ecosystem canopy.
EVALUATE THE STRAIN ENERGY ERROR FOR THE LASER WELD BY THE H-REFINEMENT OF TH...AM Publications
Currently, the finite element method (FEM) is still one of the useful tools in numerical simulation for technical problems. With this method, a continuum model presented by a certain number of elements with a simple approximation field causes the presence of discretization error in solutions. This paper considers the butt weld by laser which subjected the tension for AISI 1018 steel highness 8 mm. The aim of the study is to use the h-refinement of the FEM in estimation the strain energy error for the laser weld mentioned. The results show that the stability of the h-refinement shown by the value of the relative error of the strain energy is quite small, specifically; FEM is less than 5.7% and extra is no more than 3.7%.
HMM APPLICATION IN ISOLATED WORD SPEECH RECOGNITIONAM Publications
Speech recognition is always being an all-time trendy topic for discussion and also for researches and we see a major application in our life. This paper provides the work done on the application of Hidden Markov model to implement isolated word speech recognition on MATLAB and to develop and train the system for set of self-selective words for specific user (user dependent) to get maximum efficiency in word recognition system. Which uses the forward and Baum-welch algorithm and fitting Gaussian of the Baum-welch algorithm for all the iteration perform. We use a sample of 7 alphabets which are recorded in 15 different ways giving total of 105 word to use for training with each word with 15 variations. This system can be used in real world in system security using voice security system and mainly for children and impaired people.
PEDESTRIAN DETECTION IN LOW RESOLUTION VIDEOS USING A MULTI-FRAME HOG-BASED D...AM Publications
Detecting pedestrians in low resolution videos is a challenging task, due to the small size of pedestrians in the images and the limited information. In practical outdoor surveillance scenarios the pedestrian size is usually small. Existing state-of-the-art pedestrian detection methods that use histogram of oriented gradient (HOG) features have poor performance in this problem domain. To compensate for the lack of information in a single frame, we propose a novel detection method that recognizes pedestrians in a short sequence of frames. Namely, we take the single-frame HOG-based detector and extend it to multiple frames. Our detector is applied to regions containing potential moving objects. In the case of video taken from a moving camera on an aerial platform, video stabilization is first performed to register the frames. A classifier is then applied to features extracted from spatio-temporal volumes surrounding the potential moving objects. On challenging stationary and aerial video datasets, our detection accuracy outperforms several state-of-the-art algorithms.
The aim of this paper is to help the blind people to identify and catch the public transport vehicles with the help of Light Fidelity technology. It is a Navigation aid. When the bus arrives at the bus stand, transmitter in the bus transmits the light signals and receiver in the stick, receives the light signals and a sound signal is generated through the speaker present in the stick. The sound message contains the bus number and the destination of the bus. In addition to this, if the person is absconded or lost, details of the location will be sent to his/her family members by pressing a button. This is made possible with the help of Global System for Mobile (GSM). Finally, presence of water can be detected along the blind person’s path, with the help of water sensors.
EFFECT OF SILICON - RUBBER (SR) SHEETS AS AN ALTERNATIVE FILTER ON HIGH AND L...AM Publications
A digital radiography delivers a radiation dose to patients; therefore it poses potential risk to the patients. One effort to reduce dose is carried out using a radiation filter, e.g. Silicone Rubber (SR) sheet. The purpose of this research was to determine the impact of the SR sheet on the high contrast objects (HCO) and the low contrast objects (LCO). The dose reduction was determined from attenuation x-rays before and after using the SR sheet. Assessment of HCO and LCO was observed from CDR TOR phantom at tube voltage of 48 kVp and tube current of 8 mAs. The physical parameter to assess image quality was the Signal to Noise Ratio (SNR) value in LCO. The maximum x-ray attenuation using the SR sheet is 48.82%. The visibility of the HCO remains the same, namely 16 objects; however the LCO slighly decreases from 14 objects to 13 objects after using the SR sheet. The SNR value decreases with an average value of 15.17%.Therefore, the SR sheet as a alternative filter has no effect on the HCO and has realtively little effect on the LCO. Thus, the SR sheet potentially is used for radiation protection in patients, especially on examinations that do not require low contrast resolution.
UTILIZATION OF IMMUNIZATION SERVICES AMONG CHILDREN UNDER FIVE YEARS OF AGE I...AM Publications
Immunization is the key strategy to curb communicable diseases which are the number one killer of children under five. Immunization prevents mortalities of approximating three million children under five annually. This study aimed to assess utilization of immunization services among children under five of age in Kirinyaga County, Kenya.
REPRESENTATION OF THE BLOCK DATA ENCRYPTION ALGORITHM IN AN ANALYTICAL FORM F...AM Publications
The article presents the study of cryptographic transformations of the Kuznyechik algorithm in relation to differential analysis and the translation of their representations into a more convenient form for cryptanalysis. A simplification of the type of transformations of the algorithm to algebraic the form, in which cryptanalysis software will be more effective. Since the description of the algorithm in the analytical form allows for 16 cycles of execution of the shift register with linear feedback, each of which will be carried out 16 operations of multiplication and 15 operations of addition, reduced to 16 multiplying and 15 the operations of addition. The result is an algebraic form of a linear transformation (from a shift register with linear feedback to the multiplication of the matrix in a finite field). In the future, the algebraic type of transformation can be used to effectively carry out differential cryptanalysis.
Optical character recognition (OCR) is process of classification of optical patterns contained in a digital image. The process of OCR Recognition involves several steps including pre-processing, segmentation, feature extraction, classification. Pre-processing is for done the basic operation on input image like noise reduction which remove the noisy signal from image. Segmentation stage for segment the given image into line by line and segment each character from segmented line. Future extraction calculates the characteristics of character. A Radial Basis Function Neural Network (RBFNN) is used to classification contains the database and does the comparison.
Surveillance refers to the task of observing a scene, often for lengthy periods in search of particular objects or particular behaviour. This task has many applications, foremost among them is security (monitoring for undesirable behaviour such as theft or vandalism), but increasing numbers of others in areas such as agriculture also exist. Historically, closed circuit TV (CCTV) surveillance has been mundane and labour Intensive, involving personnel scanning multiple screens, but the advent of reasonably priced fast hardware means that automatic surveillance is becoming a realistic task to attempt in real time. Several attempts at this are underway.
SIMULATION OF ATMOSPHERIC POLLUTANTS DISPERSION IN AN URBAN ENVIRONMENTAM Publications
Interest in air pollution investigation of urban environment due to existence of industrial and commercial activities along with vehicular emission and existence of buildings and streets which setup natural barrier for pollutant dispersion in the urban environment has increased. The air pollution modelling is a multidisciplinary subject when the entire cities are taken under consideration where urban planning and geometries are complex which needs a large software packages to be developed like Operational Street Pollution Model (OSPM), California Line Source model (CALINE series) etc. On overviewing various works it can be summarized that the air pollutant dispersion in urban street canyons and all linked phenomenon such as wind flow, pollutant concentrations, temperature distribution etc. generally depend on wind speed and direction, building heights and density, road width, source and intensity of air pollution, meteorological variables like temperature, humidity etc. A unique and surprising case is observed every time on numerous combinations of these factors. The main aim of this study is to simulate the atmospheric pollutant dispersion for given pollutant like carbon monoxide, sulphur dioxide and nitrogen dioxide and given atmospheric conditions like wind speed and direction. Computational Fluid Dynamics (CFD) simulation for analysing the atmospheric pollutant dispersion is done after natural airflow analysis. Volume rendering is done for variables such as phase 2 volume fraction and velocity with resolution as 250 pixels per inch and transparency as 20%. It can be observed that all the three pollutant namely nitrogen dioxide, sulphur dioxide and carbon monoxide the phase 2 volume fraction changes from 0 to 1. The wind velocity changes from 3.395×10-13 m/s to 1.692×102 m/s. The dispersion of pollutants follow the sequence Sulphur dioxide>Carbon monoxide>Nitrogen dioxide.
PREPARATION AND EVALUATION OF WOOL KERATIN BASED CHITOSAN NANOFIBERS FOR AIR ...AM Publications
In this article, we have extracted keratin from deccani wool waste and prepared the wool keratin based Chitosan nanofibers by electrospinning technique. The prepared nanofibers mat were prepared with different weight percent ratio like 1wt.%, 3wt.% and 5wt.% with respect to polymer i.e Chitosan. The physicochemical and filtration properties of wool keratin based Chitosan nanofibers were studied. Wool keratin based Chitosan nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (FESEM). The filtration efficiency of keratin Chitosan nanofibers were investigated through DOP test and heavy metal removal capacity of evaluated through Atomic absorption spectroscopy. FTIR results were showed that Keratin gets compatible with Chitosan. XRD patterns revealed keratin was in crystalline nature and increase the crystalline nature of Chitosan nanofibers. FESEM images showed that uniform nanofibers generation with average fiber diameter 80nm. Nanofibers filtration efficiency against a particulate matter in air was obtained more than 99.53% and excellent property of removal of heavy metal.
ANALYSIS ON LOAD BALANCING ALGORITHMS IMPLEMENTATION ON CLOUD COMPUTING ENVIR...AM Publications
Cloud computing means storing and accessing data and programs over the Internet instead of your computer's hard drive. The cloud is just a metaphor for the Internet. The elements involved in cloud computing are clients, data center and distributed server. One of the main problems in cloud computing is load balancing. Balancing the load means to distribute the workload among several nodes evenly so that no single node will be overloaded. Load can be of any type that is it can be CPU load, memory capacity or network load. In this paper we presented an architecture of load balancing and algorithm which will further improve the load balancing problem by minimizing the response time. In this paper, we have proposed the enhanced version of existing regulated load balancing approach for cloud computing by comping the Randomization and greedy load balancing algorithm. To check the performance of proposed approach, we have used the cloud analyst simulator (Cloud Analyst). Through simulation analysis, it has been found that proposed improved version of regulated load balancing approach has shown better performance in terms of cost, response time and data processing time.
A MODEL BASED APPROACH FOR IMPLEMENTING WLAN SECURITY AM Publications
This paper presents various security features and configurations commonly implemented in WLANs and their aggregated security levels and then proposes a model that enables implementation and evaluation of WLAN security
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.