In recent years the use of composite materials in structural components has become increasingly common in a wide range of engineering applications. Composite materials offer numerous advantages over more conventional materials because of their superior specific properties, but a serious obstacle to a more widespread use of these materials is their high sensitivity to localized impact loading. This paper presents an experimental study to assess the impact response of drop weight impact tests on fiber reinforced polymer composites with deferent load and damage identification of composite using Non-destructive testing techniques ultrasonic testing (UT) C scan. In the study includes checking the strength of the specimen, plotting of graphs between the height and the impact energy obtained and tabulating the results after conducting the various functional tests.
An evaluation of jute epoxy-hybrid composite materials for automotive frontal...eSAT Journals
Abstract The present work evaluates the occupant safety and the mechanical behavior of the Jute-Epoxy-Glass hybrid composite materials and to carry out dynamic analysis of an automobile car frontal components like Bumper beam by using Jute-Epoxy-Glass Hybrid composite material by FE approach. In the present study, HYPERMESH and LS-DYNA software is employed to obtain a better composite material. Durability, NVH, Crash safety and Aesthetics are some of the important vehicle attributes that need to be meet the vehicle manufacturer. While the crash safety for NHTSA requires the G level should be less then 40G'S at the occupant seat. Initially manufacturing of 4 ply, 6 ply (Jute-Epoxy) and 5 ply (Jute-Glass-Epoxy) laminates is done and there characterization is done under Quasi static (1mm/min) and Impact High strain rate loading (100mm/min and 200mm/min) for tensile tests. The mechanical properties obtained are set for the existing bumper beam of a meshed model. For bumper beam of a car with a given velocity of 56 km/h according to the NHTSA high speed crash test. For a high speed crash speed test of bumper beam the G levels is taken into consideration so that the G levels acting upon the occupant doesn't cross 40 G'S as safer. The results obtained from high strain rate of 200mm/min tensile tests explore to bumper beam for which G level acting on the occupant is 35 G's for hybrid jute glass epoxy with 6mm thickness which is found to be best suited composite material which is safer for the occupant and also the weight reduction is also considered where conventionally used steel is 6.6 kgs and the hybrid material of Jute-Glass-Epoxy is 2.9 kgs these weight savings leads to fuel efficiency of the car. Keywords: Hybrid composites, NHTSA, Ls-Dyna, High strain rate And G levels etc…
Comparative Study on RCC Beam with and without Carbon Fibre Reinforced Polyme...ijtsrd
RCC components are mainly beams and columns are sturdy and strong in flexure when they are utilized with Carbon Fibre Reinforced Polymers CFRP composites which are epoxy bonded for tensile zones with the direction of fibres parallel to it of high tensile stresses. The mechanical behavior of composite concrete structures is difficult to analyze by an analytical model, due to the nonlinear behavior of the composite material. FE analysis is an efficient solution to overcome the problems. A load defection response, stress response and strain response were measured when CFRP reinforcement was provided, the stiffer response was observed at a relatively reduction in deflection, stress and strain in CFRP sheet.Finite Element Method analysis for the investigation of deformation and stresses. Ansys 14.5 software is used for finite element modelling. In this study unreinforced beam and beam reinforced with CFRP are compared on the basis of deformation and stresses. Rahul Dev Bharti | Prof. Nitesh Khuswaha "Comparative Study on RCC Beam with & without Carbon Fibre Reinforced Polymer using Ansys Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29628.pdfPaper URL: https://www.ijtsrd.com/engineering/civil-engineering/29628/comparative-study-on-rcc-beam-with-and-without-carbon-fibre-reinforced-polymer-using-ansys-software/rahul-dev-bharti
An evaluation of jute epoxy-hybrid composite materials for automotive frontal...eSAT Journals
Abstract The present work evaluates the occupant safety and the mechanical behavior of the Jute-Epoxy-Glass hybrid composite materials and to carry out dynamic analysis of an automobile car frontal components like Bumper beam by using Jute-Epoxy-Glass Hybrid composite material by FE approach. In the present study, HYPERMESH and LS-DYNA software is employed to obtain a better composite material. Durability, NVH, Crash safety and Aesthetics are some of the important vehicle attributes that need to be meet the vehicle manufacturer. While the crash safety for NHTSA requires the G level should be less then 40G'S at the occupant seat. Initially manufacturing of 4 ply, 6 ply (Jute-Epoxy) and 5 ply (Jute-Glass-Epoxy) laminates is done and there characterization is done under Quasi static (1mm/min) and Impact High strain rate loading (100mm/min and 200mm/min) for tensile tests. The mechanical properties obtained are set for the existing bumper beam of a meshed model. For bumper beam of a car with a given velocity of 56 km/h according to the NHTSA high speed crash test. For a high speed crash speed test of bumper beam the G levels is taken into consideration so that the G levels acting upon the occupant doesn't cross 40 G'S as safer. The results obtained from high strain rate of 200mm/min tensile tests explore to bumper beam for which G level acting on the occupant is 35 G's for hybrid jute glass epoxy with 6mm thickness which is found to be best suited composite material which is safer for the occupant and also the weight reduction is also considered where conventionally used steel is 6.6 kgs and the hybrid material of Jute-Glass-Epoxy is 2.9 kgs these weight savings leads to fuel efficiency of the car. Keywords: Hybrid composites, NHTSA, Ls-Dyna, High strain rate And G levels etc…
Comparative Study on RCC Beam with and without Carbon Fibre Reinforced Polyme...ijtsrd
RCC components are mainly beams and columns are sturdy and strong in flexure when they are utilized with Carbon Fibre Reinforced Polymers CFRP composites which are epoxy bonded for tensile zones with the direction of fibres parallel to it of high tensile stresses. The mechanical behavior of composite concrete structures is difficult to analyze by an analytical model, due to the nonlinear behavior of the composite material. FE analysis is an efficient solution to overcome the problems. A load defection response, stress response and strain response were measured when CFRP reinforcement was provided, the stiffer response was observed at a relatively reduction in deflection, stress and strain in CFRP sheet.Finite Element Method analysis for the investigation of deformation and stresses. Ansys 14.5 software is used for finite element modelling. In this study unreinforced beam and beam reinforced with CFRP are compared on the basis of deformation and stresses. Rahul Dev Bharti | Prof. Nitesh Khuswaha "Comparative Study on RCC Beam with & without Carbon Fibre Reinforced Polymer using Ansys Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29628.pdfPaper URL: https://www.ijtsrd.com/engineering/civil-engineering/29628/comparative-study-on-rcc-beam-with-and-without-carbon-fibre-reinforced-polymer-using-ansys-software/rahul-dev-bharti
The natural fiber reinforced composites are emerging as a potential replacement to synthetic fiber composite for lowering down the cost of applications and they are used in interior of automobile, chassis of cellular phone, building construction, etc. Drilling operation is the most important machining process for assembly of different components. Delamination phenomenon occurs during drilling operation on composites which lay-down the structural reliability of component. The present work focused to carry out experimental studies of thrust force and delamination on drilling of unidirectional hemp fiber reinforced composite. The drilling was carried out by varying tool geometry (end mill, Centre drill, parabolic drill), feed rate (0.07, 0.17, 0.27 mm/rev) and spindle speed (800, 2800, 4800 rpm). Digital image analysis was used to determine the delamination factor. ANOVA has been used to determine the contribution of factors. Multivariable regression analysis has been also used to determine empirical model between parameters
This paper explains and details about a brief study and comparison of the various available engineering and structural materials which is the key requirement for the optimum functioning of Unmanned Aerial Vehicles (UAVs) known as drone and referred to as Remotely Piloted Aircraft (RPA) of 'Advanced class' of this competition. The major requirements that these materials on UAVs with respect to physical and mechanical properties must fulfill are: resistance to buckling, high ultimate tensile strength, less inflammable, high strength to weight ratio, low thermal gradient, resistance to noise and vibration, resistance against deteriorative fuels and chemicals, low corrosion and oxidation, ease of shape ability, fastening and joining, high fatigue and endurance limit
Review Paper on Nanotechnology-enhanced fiber-reinforced polymer compositesAdib Bin Rashid
Incorporating nanoparticles can significantly improve the performance and functionality of fiberreinforced polymer (FRP) composites. Different techniques exist for processing, testing, and implementing nanocomposites in various industries. Depending on these factors, these materials can be tailored to suit the specific applications of the automotive and aerospace industries, defence industries, biomedical and energy sectors etc. Nanotechnology offers several potential benefits for composites, including improved mechanical properties, surface modification, and sensing capabilities. This paper discusses the different types of nanoparticles, nanofibers, and nano-coating that can be used for reinforcement, surface modification, and property enhancement in FRP composites. It also examines the challenges associated with incorporating nanotechnology into composites and provides recommendations for potential opportunities in future work. This
study is intended to offer a comprehensive understanding of the current research on using nanotechnology in FRP composites and its potential impact on the composites industry
Modeling and analysis of naca 66 206 aerofoil propellereSAT Journals
Abstract
NACA aerofoil shapes have been successfully used over the years as wing and tail sections for general aviation and military aircraft, as well as propellers and helicopter rotors. The aircraft performance is highly affected by induced drag caused by wingtip vortices to improve fuel efficiency. In this research work, the analysis of NACA 66-206 aerofoil propellers was investigated for high-speed aircraft propulsion.CFD analysis is performed on the NACA aerofoil to verify the aerodynamic characteristics and enhancing the lift of the aircraft by changing the orientation of angle of attack 00, 100 and 200 and to determine the drag and lift coefficients by applying inlet velocities. An auxiliary part, winglets are added on propeller blade tip in order to improve the performance of propeller. By adding this auxiliary equipment the weight of propeller are significantly increased. To decrease the weight without compromising the performance of the propeller the fiber reinforced composite materials are used. The effects of stacking sequence layers of composite materials, which were fabricated from Kevlar, carbon, glass fibres, and epoxy resin have been used to increase the strength to weight ratio. To validate the strength of the propeller, Structural and buckling analysis is performed.
Keywords: Aerofoil, Propeller, fiber reinforcement and strength etc…
ANALYSIS AND EXPERIMENTAL VALIDATION OF COMPOSITE LAP JOINT WITH CRACK FOR AE...IAEME Publication
Composite materials have made way to several different fields, including
aerospace structures, under water vehicles, automobiles and robot systems etc. Due to
the high strength they are widely used in the low weight constructions and also used
as a suitable alternative to metals. ANSYS FEA tool has been used for stress
distribution characteristics of single lap joint with crack in-built in adhesive layer. In
several different applications and also for joining various composite parts together, by
using epoxy adhesives. Modeling and static analysis of 3D Models of lap joints were
carried out and compared for two different composite materials. The present study
deals with the analysis of single lap joint subjected to tensile load and the stress
distribution in the joint members under various design conditions are to be found.
The fracture characteristics of single-lap bonded joints in composites to be
investigated by structural analysis and experimentally. The effects of bonding method,
surface roughness, bond line thickness and the existence of fillet on the failure
characteristics and strength of bonded single-lap joints were evaluated
experimentally. The failure process, failure mode and the behavior of loaddisplacement
curve was apparently different according to bonding method to be
evaluated
DEVELOPMENT OF TODDLER FAMILY CADRE TRAINING BASED ON ANDROID APPLICATIONS IN...AM Publications
Toddler family cadre is a community members work voluntarily in fostering and providing information to parents of toddlers about how to properly care for children. Toddler Family cadre desperately need training to increase their skills. There are still a few Toddler family cadres who get training so that the knowledge and skills of parents and other family members in developing toddlers' growth through physical stimulation, motoric intelligence, emotional and social economy as well as possible are still lacking. The purpose of this study is to develop an Android- assisted Toddler family cadre training model in Demak. This research is research in tian research and development. The research location was in Demak Regency. Toddler family cadres became the object of this research. Development of Toddler family cadre training models assisted by Android in Demak is feasible to be used as an effort to improve Toddler Family cadres' capabilities.
THE USE OF FRACTAL GEOMETRY IN TILING MOTIF DESIGNAM Publications
In this paper I will present the use of fractal geometry to design tile motifs. A fractal is a geometric figure that combines the several characteristics among others: its parts have the same form as the whole, fragmented, and formation by iteration. The concept of fractals has been spread over all fields of sciences, technology, and art. This paper aims to provide an algorithm to creating motifs of tile algorithm for create the tile motif consists of base, iteration, coloration and duplication. In order to help the reader better understand the algorithm, I will present some script using Matlab. We describe a mathematically based algorithm that can fill a spatial region with sequence of randomly placed which may be transformed copies of one motif or several motifs. By using this algorithm, I can produce thousand variety of aesthetically pleasing tile motifs, of which we show a number of examples.
More Related Content
Similar to TESTING OF COMPOSITE ON DROP-WEIGHT IMPACT TESTING AND DAMAGE IDENTIFICATION OF COMPOSITE USING NON-DESTRUCTIVE TESTING TECHNIQUES UT - C SCAN
The natural fiber reinforced composites are emerging as a potential replacement to synthetic fiber composite for lowering down the cost of applications and they are used in interior of automobile, chassis of cellular phone, building construction, etc. Drilling operation is the most important machining process for assembly of different components. Delamination phenomenon occurs during drilling operation on composites which lay-down the structural reliability of component. The present work focused to carry out experimental studies of thrust force and delamination on drilling of unidirectional hemp fiber reinforced composite. The drilling was carried out by varying tool geometry (end mill, Centre drill, parabolic drill), feed rate (0.07, 0.17, 0.27 mm/rev) and spindle speed (800, 2800, 4800 rpm). Digital image analysis was used to determine the delamination factor. ANOVA has been used to determine the contribution of factors. Multivariable regression analysis has been also used to determine empirical model between parameters
This paper explains and details about a brief study and comparison of the various available engineering and structural materials which is the key requirement for the optimum functioning of Unmanned Aerial Vehicles (UAVs) known as drone and referred to as Remotely Piloted Aircraft (RPA) of 'Advanced class' of this competition. The major requirements that these materials on UAVs with respect to physical and mechanical properties must fulfill are: resistance to buckling, high ultimate tensile strength, less inflammable, high strength to weight ratio, low thermal gradient, resistance to noise and vibration, resistance against deteriorative fuels and chemicals, low corrosion and oxidation, ease of shape ability, fastening and joining, high fatigue and endurance limit
Review Paper on Nanotechnology-enhanced fiber-reinforced polymer compositesAdib Bin Rashid
Incorporating nanoparticles can significantly improve the performance and functionality of fiberreinforced polymer (FRP) composites. Different techniques exist for processing, testing, and implementing nanocomposites in various industries. Depending on these factors, these materials can be tailored to suit the specific applications of the automotive and aerospace industries, defence industries, biomedical and energy sectors etc. Nanotechnology offers several potential benefits for composites, including improved mechanical properties, surface modification, and sensing capabilities. This paper discusses the different types of nanoparticles, nanofibers, and nano-coating that can be used for reinforcement, surface modification, and property enhancement in FRP composites. It also examines the challenges associated with incorporating nanotechnology into composites and provides recommendations for potential opportunities in future work. This
study is intended to offer a comprehensive understanding of the current research on using nanotechnology in FRP composites and its potential impact on the composites industry
Modeling and analysis of naca 66 206 aerofoil propellereSAT Journals
Abstract
NACA aerofoil shapes have been successfully used over the years as wing and tail sections for general aviation and military aircraft, as well as propellers and helicopter rotors. The aircraft performance is highly affected by induced drag caused by wingtip vortices to improve fuel efficiency. In this research work, the analysis of NACA 66-206 aerofoil propellers was investigated for high-speed aircraft propulsion.CFD analysis is performed on the NACA aerofoil to verify the aerodynamic characteristics and enhancing the lift of the aircraft by changing the orientation of angle of attack 00, 100 and 200 and to determine the drag and lift coefficients by applying inlet velocities. An auxiliary part, winglets are added on propeller blade tip in order to improve the performance of propeller. By adding this auxiliary equipment the weight of propeller are significantly increased. To decrease the weight without compromising the performance of the propeller the fiber reinforced composite materials are used. The effects of stacking sequence layers of composite materials, which were fabricated from Kevlar, carbon, glass fibres, and epoxy resin have been used to increase the strength to weight ratio. To validate the strength of the propeller, Structural and buckling analysis is performed.
Keywords: Aerofoil, Propeller, fiber reinforcement and strength etc…
ANALYSIS AND EXPERIMENTAL VALIDATION OF COMPOSITE LAP JOINT WITH CRACK FOR AE...IAEME Publication
Composite materials have made way to several different fields, including
aerospace structures, under water vehicles, automobiles and robot systems etc. Due to
the high strength they are widely used in the low weight constructions and also used
as a suitable alternative to metals. ANSYS FEA tool has been used for stress
distribution characteristics of single lap joint with crack in-built in adhesive layer. In
several different applications and also for joining various composite parts together, by
using epoxy adhesives. Modeling and static analysis of 3D Models of lap joints were
carried out and compared for two different composite materials. The present study
deals with the analysis of single lap joint subjected to tensile load and the stress
distribution in the joint members under various design conditions are to be found.
The fracture characteristics of single-lap bonded joints in composites to be
investigated by structural analysis and experimentally. The effects of bonding method,
surface roughness, bond line thickness and the existence of fillet on the failure
characteristics and strength of bonded single-lap joints were evaluated
experimentally. The failure process, failure mode and the behavior of loaddisplacement
curve was apparently different according to bonding method to be
evaluated
Similar to TESTING OF COMPOSITE ON DROP-WEIGHT IMPACT TESTING AND DAMAGE IDENTIFICATION OF COMPOSITE USING NON-DESTRUCTIVE TESTING TECHNIQUES UT - C SCAN (20)
DEVELOPMENT OF TODDLER FAMILY CADRE TRAINING BASED ON ANDROID APPLICATIONS IN...AM Publications
Toddler family cadre is a community members work voluntarily in fostering and providing information to parents of toddlers about how to properly care for children. Toddler Family cadre desperately need training to increase their skills. There are still a few Toddler family cadres who get training so that the knowledge and skills of parents and other family members in developing toddlers' growth through physical stimulation, motoric intelligence, emotional and social economy as well as possible are still lacking. The purpose of this study is to develop an Android- assisted Toddler family cadre training model in Demak. This research is research in tian research and development. The research location was in Demak Regency. Toddler family cadres became the object of this research. Development of Toddler family cadre training models assisted by Android in Demak is feasible to be used as an effort to improve Toddler Family cadres' capabilities.
THE USE OF FRACTAL GEOMETRY IN TILING MOTIF DESIGNAM Publications
In this paper I will present the use of fractal geometry to design tile motifs. A fractal is a geometric figure that combines the several characteristics among others: its parts have the same form as the whole, fragmented, and formation by iteration. The concept of fractals has been spread over all fields of sciences, technology, and art. This paper aims to provide an algorithm to creating motifs of tile algorithm for create the tile motif consists of base, iteration, coloration and duplication. In order to help the reader better understand the algorithm, I will present some script using Matlab. We describe a mathematically based algorithm that can fill a spatial region with sequence of randomly placed which may be transformed copies of one motif or several motifs. By using this algorithm, I can produce thousand variety of aesthetically pleasing tile motifs, of which we show a number of examples.
TWO-DIMENSIONAL INVERSION FINITE ELEMENT MODELING OF MAGNETOTELLURIC DATA: CA...AM Publications
Two-dimensional resistivity analysis of magnetotelluric data has been done at “Z” geothermal area which is located in southern part of Indonesia. The objective is to understand subsurface structure beneath reasearch area based on 2-D modeling of magnetotelluric data. The inversion finite element method were used for numerical simulations which requires discretization on the boundary of the modeling domain. The modeling results of magnetotelluric data shows relativity structure dissemination: 0-10 ohm.m in a thickness of 1 km (Clay Cap), 10-100 ohm.m with 1-2 km depth respectively (reservoir zone), and on a scale of 100-1000 ohm.m in a depth of 2-3 km (heat source zone). The result of relativity structure can be used to delineate an area with geothermal prospect around 12 km2.
USING THE GENETIC ALGORITHM TO OPTIMIZE LASER WELDING PARAMETERS FOR MARTENSI...AM Publications
To achieve the pre-set welding size, this paper presents the optimization of the constrained overlap laser welding input parameters for AISI 416 and AISI 440FSe stainless, thickness 0.5 mm. In this study, the proposed optimization algorithm is the Genetic Algorithm (GA). After training 10 times for 30 NP (population size), each training repeated 200 times, the results achieved as expected. The error is compared with the result of the affirmation experiment not exceeding 5%.
ANALYSIS AND DESIGN E-MARKETPLACE FOR MICRO, SMALL AND MEDIUM ENTERPRISESAM Publications
The Ministry of Cooperatives and Small and Medium Enterprises launched in 2018 the number of Micro, Small and Medium Enterprises (MSMEs) in Indonesia as many as 58.97 million people. It is predicted that the number of MSMEs players in 2019 will amount to 59.2 million. This shows that the Indonesian people have made changes in the field of family economics which initially as consumptive are now productive. The community prefers to carry out activities that can increase family income. Future MSMEs remain the mainstay of the national economy. In accordance with the government roadmap, in 2020 e-commerce transactions are predicted to reach Rp1,300 trillion or equivalent to USD130 billion. According to data from the Central Statistics Agency (BPS), the contribution of MSMEs to Indonesia's Gross Domestic Product (GDP) reached 61.41%, with the number of MSMEs reaching almost 60 million units. However, only around 8% or 3.79 million of the 59.2 million MSMEs players have used online platforms to market their products. Based on the above problems, researchers conducted research on the analysis and display of E-Marketplace for MSMEs in Indonesia. The type of research used is action research. The object of research is MSMEs which are under the Office of Industry and Trade of Sragen Regency. The method of data collection is by techniques: (1) interview, (2) documentation (3) observation, (4) literature study. The researcher uses the waterfall method in developing the system. The research team has successfully analyzed the E-Market place according to the results of data collection. The research team has succeeded in designing the E-Marketplace for MSMEs. E-Marketplace designed can be used by admin, MSME and user. Admin is in charge of managing E-Marketplace and has full access rights. MSMEs can register online and manage their products in E-Marketplace. Users or buyers can search data in E-Marketplace as desired. To make transactions, users can interact directly with MSMEs according to the data provided in E-Marketplace. E-Marketplace can be used for marketing together MSMEs products. This e-marketplace can be accessed at www.umkmonline.com
REMOTE SENSING AND GEOGRAPHIC INFORMATION SYSTEMS AM Publications
Remote sensing technology's increasing accessibility helps us observe research and learn about our globe in ways we could only imagine a generation ago. Guides to profound knowledge of historical, conceptual and practical uses of remote sensing which is increasing GIS technology. This paper will go briefly through remote sensing benefits, history, technology and the GIS and remote sensing integration and their applications. Remote sensing (RS) is used in mapping the predicted and actual species and dominates the ecosystem canopy.
EVALUATE THE STRAIN ENERGY ERROR FOR THE LASER WELD BY THE H-REFINEMENT OF TH...AM Publications
Currently, the finite element method (FEM) is still one of the useful tools in numerical simulation for technical problems. With this method, a continuum model presented by a certain number of elements with a simple approximation field causes the presence of discretization error in solutions. This paper considers the butt weld by laser which subjected the tension for AISI 1018 steel highness 8 mm. The aim of the study is to use the h-refinement of the FEM in estimation the strain energy error for the laser weld mentioned. The results show that the stability of the h-refinement shown by the value of the relative error of the strain energy is quite small, specifically; FEM is less than 5.7% and extra is no more than 3.7%.
HMM APPLICATION IN ISOLATED WORD SPEECH RECOGNITIONAM Publications
Speech recognition is always being an all-time trendy topic for discussion and also for researches and we see a major application in our life. This paper provides the work done on the application of Hidden Markov model to implement isolated word speech recognition on MATLAB and to develop and train the system for set of self-selective words for specific user (user dependent) to get maximum efficiency in word recognition system. Which uses the forward and Baum-welch algorithm and fitting Gaussian of the Baum-welch algorithm for all the iteration perform. We use a sample of 7 alphabets which are recorded in 15 different ways giving total of 105 word to use for training with each word with 15 variations. This system can be used in real world in system security using voice security system and mainly for children and impaired people.
PEDESTRIAN DETECTION IN LOW RESOLUTION VIDEOS USING A MULTI-FRAME HOG-BASED D...AM Publications
Detecting pedestrians in low resolution videos is a challenging task, due to the small size of pedestrians in the images and the limited information. In practical outdoor surveillance scenarios the pedestrian size is usually small. Existing state-of-the-art pedestrian detection methods that use histogram of oriented gradient (HOG) features have poor performance in this problem domain. To compensate for the lack of information in a single frame, we propose a novel detection method that recognizes pedestrians in a short sequence of frames. Namely, we take the single-frame HOG-based detector and extend it to multiple frames. Our detector is applied to regions containing potential moving objects. In the case of video taken from a moving camera on an aerial platform, video stabilization is first performed to register the frames. A classifier is then applied to features extracted from spatio-temporal volumes surrounding the potential moving objects. On challenging stationary and aerial video datasets, our detection accuracy outperforms several state-of-the-art algorithms.
The aim of this paper is to help the blind people to identify and catch the public transport vehicles with the help of Light Fidelity technology. It is a Navigation aid. When the bus arrives at the bus stand, transmitter in the bus transmits the light signals and receiver in the stick, receives the light signals and a sound signal is generated through the speaker present in the stick. The sound message contains the bus number and the destination of the bus. In addition to this, if the person is absconded or lost, details of the location will be sent to his/her family members by pressing a button. This is made possible with the help of Global System for Mobile (GSM). Finally, presence of water can be detected along the blind person’s path, with the help of water sensors.
EFFECT OF SILICON - RUBBER (SR) SHEETS AS AN ALTERNATIVE FILTER ON HIGH AND L...AM Publications
A digital radiography delivers a radiation dose to patients; therefore it poses potential risk to the patients. One effort to reduce dose is carried out using a radiation filter, e.g. Silicone Rubber (SR) sheet. The purpose of this research was to determine the impact of the SR sheet on the high contrast objects (HCO) and the low contrast objects (LCO). The dose reduction was determined from attenuation x-rays before and after using the SR sheet. Assessment of HCO and LCO was observed from CDR TOR phantom at tube voltage of 48 kVp and tube current of 8 mAs. The physical parameter to assess image quality was the Signal to Noise Ratio (SNR) value in LCO. The maximum x-ray attenuation using the SR sheet is 48.82%. The visibility of the HCO remains the same, namely 16 objects; however the LCO slighly decreases from 14 objects to 13 objects after using the SR sheet. The SNR value decreases with an average value of 15.17%.Therefore, the SR sheet as a alternative filter has no effect on the HCO and has realtively little effect on the LCO. Thus, the SR sheet potentially is used for radiation protection in patients, especially on examinations that do not require low contrast resolution.
UTILIZATION OF IMMUNIZATION SERVICES AMONG CHILDREN UNDER FIVE YEARS OF AGE I...AM Publications
Immunization is the key strategy to curb communicable diseases which are the number one killer of children under five. Immunization prevents mortalities of approximating three million children under five annually. This study aimed to assess utilization of immunization services among children under five of age in Kirinyaga County, Kenya.
REPRESENTATION OF THE BLOCK DATA ENCRYPTION ALGORITHM IN AN ANALYTICAL FORM F...AM Publications
The article presents the study of cryptographic transformations of the Kuznyechik algorithm in relation to differential analysis and the translation of their representations into a more convenient form for cryptanalysis. A simplification of the type of transformations of the algorithm to algebraic the form, in which cryptanalysis software will be more effective. Since the description of the algorithm in the analytical form allows for 16 cycles of execution of the shift register with linear feedback, each of which will be carried out 16 operations of multiplication and 15 operations of addition, reduced to 16 multiplying and 15 the operations of addition. The result is an algebraic form of a linear transformation (from a shift register with linear feedback to the multiplication of the matrix in a finite field). In the future, the algebraic type of transformation can be used to effectively carry out differential cryptanalysis.
Optical character recognition (OCR) is process of classification of optical patterns contained in a digital image. The process of OCR Recognition involves several steps including pre-processing, segmentation, feature extraction, classification. Pre-processing is for done the basic operation on input image like noise reduction which remove the noisy signal from image. Segmentation stage for segment the given image into line by line and segment each character from segmented line. Future extraction calculates the characteristics of character. A Radial Basis Function Neural Network (RBFNN) is used to classification contains the database and does the comparison.
Surveillance refers to the task of observing a scene, often for lengthy periods in search of particular objects or particular behaviour. This task has many applications, foremost among them is security (monitoring for undesirable behaviour such as theft or vandalism), but increasing numbers of others in areas such as agriculture also exist. Historically, closed circuit TV (CCTV) surveillance has been mundane and labour Intensive, involving personnel scanning multiple screens, but the advent of reasonably priced fast hardware means that automatic surveillance is becoming a realistic task to attempt in real time. Several attempts at this are underway.
SIMULATION OF ATMOSPHERIC POLLUTANTS DISPERSION IN AN URBAN ENVIRONMENTAM Publications
Interest in air pollution investigation of urban environment due to existence of industrial and commercial activities along with vehicular emission and existence of buildings and streets which setup natural barrier for pollutant dispersion in the urban environment has increased. The air pollution modelling is a multidisciplinary subject when the entire cities are taken under consideration where urban planning and geometries are complex which needs a large software packages to be developed like Operational Street Pollution Model (OSPM), California Line Source model (CALINE series) etc. On overviewing various works it can be summarized that the air pollutant dispersion in urban street canyons and all linked phenomenon such as wind flow, pollutant concentrations, temperature distribution etc. generally depend on wind speed and direction, building heights and density, road width, source and intensity of air pollution, meteorological variables like temperature, humidity etc. A unique and surprising case is observed every time on numerous combinations of these factors. The main aim of this study is to simulate the atmospheric pollutant dispersion for given pollutant like carbon monoxide, sulphur dioxide and nitrogen dioxide and given atmospheric conditions like wind speed and direction. Computational Fluid Dynamics (CFD) simulation for analysing the atmospheric pollutant dispersion is done after natural airflow analysis. Volume rendering is done for variables such as phase 2 volume fraction and velocity with resolution as 250 pixels per inch and transparency as 20%. It can be observed that all the three pollutant namely nitrogen dioxide, sulphur dioxide and carbon monoxide the phase 2 volume fraction changes from 0 to 1. The wind velocity changes from 3.395×10-13 m/s to 1.692×102 m/s. The dispersion of pollutants follow the sequence Sulphur dioxide>Carbon monoxide>Nitrogen dioxide.
PREPARATION AND EVALUATION OF WOOL KERATIN BASED CHITOSAN NANOFIBERS FOR AIR ...AM Publications
In this article, we have extracted keratin from deccani wool waste and prepared the wool keratin based Chitosan nanofibers by electrospinning technique. The prepared nanofibers mat were prepared with different weight percent ratio like 1wt.%, 3wt.% and 5wt.% with respect to polymer i.e Chitosan. The physicochemical and filtration properties of wool keratin based Chitosan nanofibers were studied. Wool keratin based Chitosan nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (FESEM). The filtration efficiency of keratin Chitosan nanofibers were investigated through DOP test and heavy metal removal capacity of evaluated through Atomic absorption spectroscopy. FTIR results were showed that Keratin gets compatible with Chitosan. XRD patterns revealed keratin was in crystalline nature and increase the crystalline nature of Chitosan nanofibers. FESEM images showed that uniform nanofibers generation with average fiber diameter 80nm. Nanofibers filtration efficiency against a particulate matter in air was obtained more than 99.53% and excellent property of removal of heavy metal.
ANALYSIS ON LOAD BALANCING ALGORITHMS IMPLEMENTATION ON CLOUD COMPUTING ENVIR...AM Publications
Cloud computing means storing and accessing data and programs over the Internet instead of your computer's hard drive. The cloud is just a metaphor for the Internet. The elements involved in cloud computing are clients, data center and distributed server. One of the main problems in cloud computing is load balancing. Balancing the load means to distribute the workload among several nodes evenly so that no single node will be overloaded. Load can be of any type that is it can be CPU load, memory capacity or network load. In this paper we presented an architecture of load balancing and algorithm which will further improve the load balancing problem by minimizing the response time. In this paper, we have proposed the enhanced version of existing regulated load balancing approach for cloud computing by comping the Randomization and greedy load balancing algorithm. To check the performance of proposed approach, we have used the cloud analyst simulator (Cloud Analyst). Through simulation analysis, it has been found that proposed improved version of regulated load balancing approach has shown better performance in terms of cost, response time and data processing time.
A MODEL BASED APPROACH FOR IMPLEMENTING WLAN SECURITY AM Publications
This paper presents various security features and configurations commonly implemented in WLANs and their aggregated security levels and then proposes a model that enables implementation and evaluation of WLAN security
DATA MINING WITH CLUSTERING ON BIG DATA FOR SHOPPING MALL’S DATASETAM Publications
Big Data is the extremely large sets of data that their sizes are beyond the ability of capturing, managing, processing and storage by most software tools and people which is ever increasing day-by-day. In most enterprise scenarios the data is too big or it moves too fast that extremely exceeds current processing capacity. The term big data is also used by vendors, may refer to the technology which includes tools and processes that an organization requires to handle the large amounts of data and storage facilities. This advancement in technology leads to make relationship marketing a reality for today’s competitive world. But at the same time this huge amount of data cannot be analyzed in a traditional manner, by using manual data analysis. For this, technologies such as data warehousing and data mining have made customer relationship management as a new area where business firms can gain a competitive advantage for identifying their customer behaviors and needs. This paper mainly focuses on data mining technique that performs the extraction of hidden predictive information from large databases and organizations can identify valuable customers and predicts future user behaviors. This enables different organizations to make proactive, knowledge-driven decisions. Data mining tools answer business questions that in the past were too time-consuming, this makes customer relationship management possible. For this in this paper, we are trying explain the use of data mining technique to accomplish the goals of today’s customer relationship management and Decision making for different companies that deals with big data.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.