This tutorial will help you to getting start on QlikView product.
After study this tutorial you will be able to create dashboard on QlikView. This tutorial best for beginners.
This document discusses patterning and plotting in fashion design and AutoCAD. It explains that patterning involves transforming sketches into patterns for perfect fitting garments, while plotting is the process of outputting drawings. It provides instructions for plotting in AutoCAD, including setting the units, page/layout, title block, viewports and scale, and then plotting the drawing.
TRUNG TÂM TIN HỌC - ĐỒ HỌA AN NAM
Hẻm 378, Bùi Trọng Nghĩa, KP3, phường Trảng Dài, Tp.Biên Hòa, T.Đồng Nai
Group: https://www.facebook.com/groups/AnNamBim
Fanpage: https://www.facebook.com/RevitAnNam/
https://www.facebook.com/TinHocAnNam
https://www.facebook.com/AnNamBim/
Website: bimxaydung.com
Email: bimxaydung@gmail.com
This document provides an overview of three methods for adding lighting effects in Photoshop. Method one uses Photoshop's built-in lighting effects tool. Method two uses layer masking to simulate lighting by overlapping transparent layers. Method three combines the first two methods and applies them to architectural images. The document includes instructions and screenshots to demonstrate each lighting technique.
Tableau is a leading technology that shows data in a much comprehensive and comprehendible way. Comprehensive because you can show multiple things together and can tell a story out of numbers, and comprehendible because it is easier to understand graphically and helps you induce thinking about the graph. However, bringing your visualizations from “better” to “best” takes time, practice, patience and some knowledge of visual analysis best practices
Here are some of the best practices to make your visualization more interactive and creative.
This document provides instructions for a practical evaluation in a computer aided design (CAD) class. It details how to start the AutoCAD software, display toolbars, create a new file, and save and exit a drawing. It also includes a results section to label parts of the AutoCAD screen, discussion questions about CAD commands, and a student reflection section.
This document provides instructions for editing a WSDL document using Eclipse. It describes opening the WSDL file for a "Hello" web service in the Eclipse WSDL editor, which displays the file contents in both a graphical Design view and textual Source view. The editor allows editing port addresses and other properties. Inline schemas can also be viewed and edited using pop-up menus and properties views.
This document provides an introduction to creating basic flowcharts in Microsoft Visio 2010. It discusses selecting a template, adding shapes by dragging them from the stencil pane onto the workspace and linking them with arrows. The document also covers adding data to shapes, using comments and tracking changes, formatting diagrams, and saving in alternative file formats.
AutoCAD 2015 includes many enhancements to improve the user experience. Key updates include a new tab interface for creating and learning, dark and light color themes, enhanced graphics and selection tools, improved dimensioning and text tools, and reality capture functionality for linking CAD models to real world environments. Additional changes provide more flexible model space viewports, layer sorting, and tools for isometric drafting.
This document discusses patterning and plotting in fashion design and AutoCAD. It explains that patterning involves transforming sketches into patterns for perfect fitting garments, while plotting is the process of outputting drawings. It provides instructions for plotting in AutoCAD, including setting the units, page/layout, title block, viewports and scale, and then plotting the drawing.
TRUNG TÂM TIN HỌC - ĐỒ HỌA AN NAM
Hẻm 378, Bùi Trọng Nghĩa, KP3, phường Trảng Dài, Tp.Biên Hòa, T.Đồng Nai
Group: https://www.facebook.com/groups/AnNamBim
Fanpage: https://www.facebook.com/RevitAnNam/
https://www.facebook.com/TinHocAnNam
https://www.facebook.com/AnNamBim/
Website: bimxaydung.com
Email: bimxaydung@gmail.com
This document provides an overview of three methods for adding lighting effects in Photoshop. Method one uses Photoshop's built-in lighting effects tool. Method two uses layer masking to simulate lighting by overlapping transparent layers. Method three combines the first two methods and applies them to architectural images. The document includes instructions and screenshots to demonstrate each lighting technique.
Tableau is a leading technology that shows data in a much comprehensive and comprehendible way. Comprehensive because you can show multiple things together and can tell a story out of numbers, and comprehendible because it is easier to understand graphically and helps you induce thinking about the graph. However, bringing your visualizations from “better” to “best” takes time, practice, patience and some knowledge of visual analysis best practices
Here are some of the best practices to make your visualization more interactive and creative.
This document provides instructions for a practical evaluation in a computer aided design (CAD) class. It details how to start the AutoCAD software, display toolbars, create a new file, and save and exit a drawing. It also includes a results section to label parts of the AutoCAD screen, discussion questions about CAD commands, and a student reflection section.
This document provides instructions for editing a WSDL document using Eclipse. It describes opening the WSDL file for a "Hello" web service in the Eclipse WSDL editor, which displays the file contents in both a graphical Design view and textual Source view. The editor allows editing port addresses and other properties. Inline schemas can also be viewed and edited using pop-up menus and properties views.
This document provides an introduction to creating basic flowcharts in Microsoft Visio 2010. It discusses selecting a template, adding shapes by dragging them from the stencil pane onto the workspace and linking them with arrows. The document also covers adding data to shapes, using comments and tracking changes, formatting diagrams, and saving in alternative file formats.
AutoCAD 2015 includes many enhancements to improve the user experience. Key updates include a new tab interface for creating and learning, dark and light color themes, enhanced graphics and selection tools, improved dimensioning and text tools, and reality capture functionality for linking CAD models to real world environments. Additional changes provide more flexible model space viewports, layer sorting, and tools for isometric drafting.
The document is an instructor's guide for Pro/ENGINEER Wildfire for Designers. It contains 16 chapters that provide instruction on various aspects of using Pro/ENGINEER. Each chapter includes review questions, exercise instructions, and solutions to the exercises. The guide is intended to help teach students how to use Pro/ENGINEER for mechanical design tasks.
This document provides instructions for importing a CorelDraw design file into MasterCAM and manipulating the design using translation, rotation, and scaling transforms to fit the design within a rectangle template. The instructions cover selecting objects, translating objects by dragging them to new positions, rotating objects around a chosen point by a specified number of degrees, and scaling objects up or down using x- and y-scale factors. Chaining is used to select just the design objects when scaling down to fit within the template rectangle.
Adobe Illustrator CS5 is used to create graphics and type in vector format. Vector graphics are made up of points, lines, and curves that are defined by mathematical equations. Vector graphics are resolution independent, which means that they can be resized to any size without losing quality. This handout provides a practical approach to learning Illustrator CS5 by including real world examples. The lessons are centered around a fictitious flower shop and cover how to create a company logo, a customized PowerPoint template, a birthday party invitation for an employee, a company letterhead, and a business card.
If you would like to see more videos on Adobe Illustrator, please visit http://www.youtube.com/mycsula for more online training.
There you can find FREE tutorials on Illustrator, Photoshop, Microsoft Office, HTML5, and many more!
The document provides instructions for a practical evaluation in AutoCAD. It details how to:
1) Create layers, blocks, and insert blocks to represent electronic components.
2) Use printing commands to set the printing area, scale, and orientation to generate drawings.
3) Students will be evaluated on their accuracy and speed in completing these AutoCAD tasks.
Here are the key steps to implement K-means clustering algorithm in Java:
1. Define a Point class with x and y attributes to represent each data point.
2. Initialize K centroids randomly. K is the number of clusters.
3. Calculate the distance between each point and centroids. Assign the point to the cluster of the closest centroid.
4. Recalculate the centroid (mean point) of each cluster based on the assigned points.
5. Repeat steps 3-4 until centroids don't change or maximum iterations reached.
6. Return the final clusters.
The algorithm uses Euclidean distance as the default distance metric. It iterates between assignment step and recalculating centroids until convergence or
The document provides instructions for organizing the order of columns in the Grade Center. It outlines 5 steps: 1) Accessing the Full Grade Center from the Control Panel, 2) Clicking "Manage" and then "Column Organization", 3) Identifying arrow icons to drag and drop columns, 4) Dragging and dropping columns into the desired order, and 5) Clicking "Submit" to save the new column order. The document concludes by stating the task teaches how to organize column order in the Grade Center.
Autodesk 3ds Max Design is used to render and simulate lighting for 3D models exported from AutoCAD. The tutorial demonstrates how to import a model into 3ds Max Design, apply materials and lighting, set up cameras, and generate animations for walkthroughs. Key steps include applying sun lighting and materials to buildings, positioning cameras and lights, and creating an animated fly-through by moving the camera between set key frames.
This course teaches the basics of Autodesk Fusion 360, including solid modeling, sculpting, sketching, direct modeling, assemblies, rendering, and collaboration. Students will learn how to navigate, sketch, model, sculpt, assemble and render designs in Fusion 360. The course is intended to provide an introduction to get students started with the main aspects of Fusion 360 so they can further explore areas that interest them most. The course is estimated to take 3 hours. A computer with Fusion 360 installed and a 3-button mouse are required.
Scenarios allow users to save different sets of input values in a worksheet model to forecast outcomes under different conditions. Scenarios can be created by selecting cells to change, assigning names and values to scenarios, and saving them. Saved scenarios can then be quickly displayed by selecting the scenario name to show alternative results. A scenario summary report can also be generated to analyze results.
Autodesk Inventor 2011 introduces new features that improve ease of use, design, visualization, simulation, and interoperability capabilities. Key new features include direct manipulation modeling, an improved assembly tool, sketching and part modeling enhancements, realistic rendering, simulation guides, and improved data exchange with CAD formats like CATIA and for 3D printing. Overall, Inventor 2011 aims to provide a revolutionary digital prototyping experience for engineers.
This document provides a tutorial on using Adobe Photoshop. It discusses when Photoshop should be used, resolution standards, and file saving practices. It then covers the Photoshop workspace and tools. Specific Photoshop techniques are demonstrated like cropping, resizing images, adjusting brightness/levels, layers, and merging photos. Shortcut keys are provided at the end.
This document provides instructions for a mini project assignment in an MIS 413 class to build a one-page website using ASP.NET and CSS. Students are instructed to create a style sheet with styles for masthead, content, and footer sections. They then build an ASPX page with corresponding divs and attach the style sheet. Input objects like text boxes and dropdown lists are added to a table along with validation. Code is added to display submitted values in a label upon form submission and clear values if cancel is clicked. The finished project is uploaded to a class server.
The document provides an overview of the key features and navigation of Autodesk360 (A360). It includes:
- The A360 dashboard which contains quick links, search, notifications, and access to projects, files, people, calendar, and more.
- How to search and find files within A360 projects and models using the search box or model structure tool.
- Details on projects, files, people, calendar, wiki, and other collaboration features.
- Instructions for uploading files, creating projects and other content, and sharing models.
This document provides steps for attaching a rubric to an assignment in Blackboard. It outlines two main options - creating a new rubric within Blackboard or importing an existing rubric file. For both Turnitin and regular assignments, educators can edit the assignment, click "Add Rubric" under grading, then either build a new rubric or select an existing rubric file to attach grading criteria. The document also notes rubrics can be attached by browsing computer files and uploading.
The document provides 8 steps to add comments to a grade entry in the GradeCenter: 1) Click "GradeCenter" and select "Full GradeCenter" to see assignments needing grading; 2) Click the chevron icon next to the assignment and select "View Grade Details"; 3) On the "Grade Assignment" page, see the student's submission on the left and enter the grade in the "Attempt" field; 4) Optionally type comments in the "Feedback to Learner" box; and 5) Click "Submit" to add the grade and comments. The task teaches how to add comments to a grade entry for a student's assignment in the GradeCenter.
1. The document provides steps to create a chart of accounts (COA) structure in Oracle using an accounting flexfield. It involves setting up the flexfield, creating segments, value sets, linking value sets to segments, enabling security, and compiling the structure.
2. Key steps include navigating to the accounting flexfield setup, creating new COA structure, setting up segments like Company, Department, Account, creating corresponding value sets, linking value sets to segments, enabling security for segments and value sets, compiling the structure, and verifying successful completion.
3. The flexfield definition is then ready for entry of account values.
1. Magic Submitter allows users to create profiles to represent identities, manage content items to submit, and automate account creation and content submission across many websites.
2. It offers features like filling profile information automatically, saving category settings as templates, and programming commands to automate tasks on sites.
3. The program's tabs include Profile, Manage Items, Create Accounts, Submit Items, Options, Designer, and System to control all aspects of identity management and automated content distribution.
This document provides an overview of 3D surface modeling in AutoCAD. It discusses the different types of surface modeling commands available in AutoCAD, including 2D SOLID, 3D FACE, and Region. 2D SOLID creates filled polygons in the current UCS plane and is not a true 3D surface, while 3D FACE creates planar 3D surfaces of three or four sides and is best suited for surface modeling. The document also covers predefined, tabulated, ruled and revolved surface tools for automating surface creation, and explains how surface models represent approximate curved surfaces using planar facets rather than true curves.
The document provides step-by-step instructions for creating an additional column in the Grade Center, including entering a column name and description, selecting display and category options, setting the points possible, and optional settings like due dates before submitting. It also describes primary display options and tips for Mac users to ensure all columns and rows are visible in the Grade Center. The purpose is to teach how to manually create an extra column, such as for bonus points, within the Grade Center.
Say you have made a Data warehouse using dimensional modeling. Now the question will come how you are presenting to your stakeholder. SSRS is a great tools of Microsoft can be used. I am sharing the doc for who is going to start reporting using QUBE. Read this material with source code :
https://gallery.technet.microsoft.com/Step-by-Step-SSRS-Report-8de35ea8
This document provides instructions for creating a DotNetNuke module using LINQ to SQL. It describes setting up the development environment with DotNetNuke and Visual Studio, creating a database table, generating a LINQ to SQL class to access the database, and building the module interface with ASP.NET controls bound to a LINQ data source. The module allows users to view, insert, update and delete records in the database table through a GridView and FormView control.
The document is an instructor's guide for Pro/ENGINEER Wildfire for Designers. It contains 16 chapters that provide instruction on various aspects of using Pro/ENGINEER. Each chapter includes review questions, exercise instructions, and solutions to the exercises. The guide is intended to help teach students how to use Pro/ENGINEER for mechanical design tasks.
This document provides instructions for importing a CorelDraw design file into MasterCAM and manipulating the design using translation, rotation, and scaling transforms to fit the design within a rectangle template. The instructions cover selecting objects, translating objects by dragging them to new positions, rotating objects around a chosen point by a specified number of degrees, and scaling objects up or down using x- and y-scale factors. Chaining is used to select just the design objects when scaling down to fit within the template rectangle.
Adobe Illustrator CS5 is used to create graphics and type in vector format. Vector graphics are made up of points, lines, and curves that are defined by mathematical equations. Vector graphics are resolution independent, which means that they can be resized to any size without losing quality. This handout provides a practical approach to learning Illustrator CS5 by including real world examples. The lessons are centered around a fictitious flower shop and cover how to create a company logo, a customized PowerPoint template, a birthday party invitation for an employee, a company letterhead, and a business card.
If you would like to see more videos on Adobe Illustrator, please visit http://www.youtube.com/mycsula for more online training.
There you can find FREE tutorials on Illustrator, Photoshop, Microsoft Office, HTML5, and many more!
The document provides instructions for a practical evaluation in AutoCAD. It details how to:
1) Create layers, blocks, and insert blocks to represent electronic components.
2) Use printing commands to set the printing area, scale, and orientation to generate drawings.
3) Students will be evaluated on their accuracy and speed in completing these AutoCAD tasks.
Here are the key steps to implement K-means clustering algorithm in Java:
1. Define a Point class with x and y attributes to represent each data point.
2. Initialize K centroids randomly. K is the number of clusters.
3. Calculate the distance between each point and centroids. Assign the point to the cluster of the closest centroid.
4. Recalculate the centroid (mean point) of each cluster based on the assigned points.
5. Repeat steps 3-4 until centroids don't change or maximum iterations reached.
6. Return the final clusters.
The algorithm uses Euclidean distance as the default distance metric. It iterates between assignment step and recalculating centroids until convergence or
The document provides instructions for organizing the order of columns in the Grade Center. It outlines 5 steps: 1) Accessing the Full Grade Center from the Control Panel, 2) Clicking "Manage" and then "Column Organization", 3) Identifying arrow icons to drag and drop columns, 4) Dragging and dropping columns into the desired order, and 5) Clicking "Submit" to save the new column order. The document concludes by stating the task teaches how to organize column order in the Grade Center.
Autodesk 3ds Max Design is used to render and simulate lighting for 3D models exported from AutoCAD. The tutorial demonstrates how to import a model into 3ds Max Design, apply materials and lighting, set up cameras, and generate animations for walkthroughs. Key steps include applying sun lighting and materials to buildings, positioning cameras and lights, and creating an animated fly-through by moving the camera between set key frames.
This course teaches the basics of Autodesk Fusion 360, including solid modeling, sculpting, sketching, direct modeling, assemblies, rendering, and collaboration. Students will learn how to navigate, sketch, model, sculpt, assemble and render designs in Fusion 360. The course is intended to provide an introduction to get students started with the main aspects of Fusion 360 so they can further explore areas that interest them most. The course is estimated to take 3 hours. A computer with Fusion 360 installed and a 3-button mouse are required.
Scenarios allow users to save different sets of input values in a worksheet model to forecast outcomes under different conditions. Scenarios can be created by selecting cells to change, assigning names and values to scenarios, and saving them. Saved scenarios can then be quickly displayed by selecting the scenario name to show alternative results. A scenario summary report can also be generated to analyze results.
Autodesk Inventor 2011 introduces new features that improve ease of use, design, visualization, simulation, and interoperability capabilities. Key new features include direct manipulation modeling, an improved assembly tool, sketching and part modeling enhancements, realistic rendering, simulation guides, and improved data exchange with CAD formats like CATIA and for 3D printing. Overall, Inventor 2011 aims to provide a revolutionary digital prototyping experience for engineers.
This document provides a tutorial on using Adobe Photoshop. It discusses when Photoshop should be used, resolution standards, and file saving practices. It then covers the Photoshop workspace and tools. Specific Photoshop techniques are demonstrated like cropping, resizing images, adjusting brightness/levels, layers, and merging photos. Shortcut keys are provided at the end.
This document provides instructions for a mini project assignment in an MIS 413 class to build a one-page website using ASP.NET and CSS. Students are instructed to create a style sheet with styles for masthead, content, and footer sections. They then build an ASPX page with corresponding divs and attach the style sheet. Input objects like text boxes and dropdown lists are added to a table along with validation. Code is added to display submitted values in a label upon form submission and clear values if cancel is clicked. The finished project is uploaded to a class server.
The document provides an overview of the key features and navigation of Autodesk360 (A360). It includes:
- The A360 dashboard which contains quick links, search, notifications, and access to projects, files, people, calendar, and more.
- How to search and find files within A360 projects and models using the search box or model structure tool.
- Details on projects, files, people, calendar, wiki, and other collaboration features.
- Instructions for uploading files, creating projects and other content, and sharing models.
This document provides steps for attaching a rubric to an assignment in Blackboard. It outlines two main options - creating a new rubric within Blackboard or importing an existing rubric file. For both Turnitin and regular assignments, educators can edit the assignment, click "Add Rubric" under grading, then either build a new rubric or select an existing rubric file to attach grading criteria. The document also notes rubrics can be attached by browsing computer files and uploading.
The document provides 8 steps to add comments to a grade entry in the GradeCenter: 1) Click "GradeCenter" and select "Full GradeCenter" to see assignments needing grading; 2) Click the chevron icon next to the assignment and select "View Grade Details"; 3) On the "Grade Assignment" page, see the student's submission on the left and enter the grade in the "Attempt" field; 4) Optionally type comments in the "Feedback to Learner" box; and 5) Click "Submit" to add the grade and comments. The task teaches how to add comments to a grade entry for a student's assignment in the GradeCenter.
1. The document provides steps to create a chart of accounts (COA) structure in Oracle using an accounting flexfield. It involves setting up the flexfield, creating segments, value sets, linking value sets to segments, enabling security, and compiling the structure.
2. Key steps include navigating to the accounting flexfield setup, creating new COA structure, setting up segments like Company, Department, Account, creating corresponding value sets, linking value sets to segments, enabling security for segments and value sets, compiling the structure, and verifying successful completion.
3. The flexfield definition is then ready for entry of account values.
1. Magic Submitter allows users to create profiles to represent identities, manage content items to submit, and automate account creation and content submission across many websites.
2. It offers features like filling profile information automatically, saving category settings as templates, and programming commands to automate tasks on sites.
3. The program's tabs include Profile, Manage Items, Create Accounts, Submit Items, Options, Designer, and System to control all aspects of identity management and automated content distribution.
This document provides an overview of 3D surface modeling in AutoCAD. It discusses the different types of surface modeling commands available in AutoCAD, including 2D SOLID, 3D FACE, and Region. 2D SOLID creates filled polygons in the current UCS plane and is not a true 3D surface, while 3D FACE creates planar 3D surfaces of three or four sides and is best suited for surface modeling. The document also covers predefined, tabulated, ruled and revolved surface tools for automating surface creation, and explains how surface models represent approximate curved surfaces using planar facets rather than true curves.
The document provides step-by-step instructions for creating an additional column in the Grade Center, including entering a column name and description, selecting display and category options, setting the points possible, and optional settings like due dates before submitting. It also describes primary display options and tips for Mac users to ensure all columns and rows are visible in the Grade Center. The purpose is to teach how to manually create an extra column, such as for bonus points, within the Grade Center.
Say you have made a Data warehouse using dimensional modeling. Now the question will come how you are presenting to your stakeholder. SSRS is a great tools of Microsoft can be used. I am sharing the doc for who is going to start reporting using QUBE. Read this material with source code :
https://gallery.technet.microsoft.com/Step-by-Step-SSRS-Report-8de35ea8
This document provides instructions for creating a DotNetNuke module using LINQ to SQL. It describes setting up the development environment with DotNetNuke and Visual Studio, creating a database table, generating a LINQ to SQL class to access the database, and building the module interface with ASP.NET controls bound to a LINQ data source. The module allows users to view, insert, update and delete records in the database table through a GridView and FormView control.
This document provides instructions for creating a mapping in Informatica Power Center to perform data quality checks on financial account data from a source table to load into a target table. It describes importing the source and target tables, creating a filter transformation to select records where the account number length is 8 characters and the difference between open and close dates is not less than 30 days, and generating the mapping. The objective is to map data that meets specific rules for the target system.
The document provides steps for creating an Oracle form using the Form Builder and Data Block Wizard in Oracle Developer 6.0. It outlines the process of selecting tables, fields, and designing the form layout. Additional steps covered include adding more tables, altering the form design using PL/SQL, running the form, and entering records. The document recommends additional training resources for learning more about Oracle Developer.
The document provides steps for creating an Oracle form using the Form Builder and Data Block Wizard in Oracle Developer 6.0. It outlines the process of selecting tables, fields, joining tables, designing the form layout, adding PL/SQL triggers, running and testing the form, and saving new records. The document recommends additional training resources for learning more about Oracle Developer.
The document provides steps to create an OBIEE11g dashboard with various objects like analysis, charts, maps, and prompts. It begins by creating a dashboard prompt for revenue between a specified range using a slider. It then creates an analysis to show order, revenue, unit price by customer and establishment with filters. Subsequent steps will cover creating a chart and map visualization and integrating them into a single dashboard.
The document discusses interfacing with end users in ASP.NET. It provides two programming models - Web Forms and WCF Services. Web Forms enables creating user interfaces and application logic, while WCF Services enables remote server-side functionality access. It also discusses creating a basic web form in ASP.NET that displays the current date and time when a button is clicked to demonstrate the Web Forms model. Common controls like labels, textboxes, buttons are also summarized with their properties and events.
This document provides an agenda and overview for an OBIEE training course. The agenda covers topics like OBIEE architecture, login screens, important file locations, the OBIEE home page, column types, exercises for creating analyses and filters, pivot tables, grouping, calculated members, graphs and visualizations, maps, and creating prompts and dashboard prompts. The overview describes key features of OBIEE like its comprehensive analytics and reporting capabilities, web-based tools, multiple server architecture, support for connecting to different data sources, and integration with Oracle Fusion Middleware.
The document provides steps to create an OBIEE11g dashboard for brand analysis. It describes creating various dashboard prompts, filters, and analyses and integrating them into a single dashboard. Specifically, it outlines creating prompts for year, company, weeks between, and product hierarchy. It then provides details on building two initial analyses - a product line analysis pivot table and trending analysis bar graph. The goal is to create a fully functioning sample brand analysis dashboard to help learn OBIEE11g features.
The document provides steps to create an OBIEE11g dashboard for brand analysis. It describes creating various dashboard prompts, filters, and analyses and integrating them into a single dashboard. Specifically, it outlines creating prompts for year, company, weeks between, and product hierarchy. It then provides details on building two initial analyses - a product line analysis pivot table and a trending analysis bar graph. The goal is to create a fully functioning sample brand analysis dashboard to help learners explore OBIEE11g features.
This document provides steps to create an OBIEE 11g dashboard for analyzing brands. It describes creating several dashboard prompts, including for year, company, weeks between, and product hierarchy. It then outlines adding various dashboard components like analyses, charts, and pivots to showcase metrics like product line analysis, trending analysis, revenue by months, daily revenue timeline, top customers, and performance index compared to company average. The tutorial is intended to help OBIEE 11g learners explore features by building this sample brand analysis dashboard.
The document provides step-by-step instructions for using the Pyxis Design Manager tool to design an inverter circuit. It describes how to create a new project and schematic, add components to build the schematic, simulate the design using a testbench, and generate a layout from the schematic. The layout is then completed by routing connections and adding well and poly contacts. Design rule checks, layout vs schematic checks, and parasitic extraction are mentioned as final steps to verify the design.
This document provides instructions for creating a web service in ASP.NET (VB code) with three methods - one each for adding and subtracting two numbers, and another for connecting to a SQL database. It describes creating a web service project, adding methods to perform basic math operations, testing the service, consuming it in a web page, and includes sample code for connecting the web service to a SQL database.
The document provides an overview of the four main tools in Informatica PowerCenter - Designer, Repository Manager, Workflow Manager, and Workflow Monitor. It then focuses on describing the steps to use the Designer tool to create a mapping between a source and target database table, create a session for that mapping, and incorporate the session into a workflow that can be scheduled and monitored.
Here are the key steps to create a mapping in Informatica PowerCenter:
1. Open the Mapping Designer and create a new mapping
2. Drag and drop the source and target tables from the Repository Navigator into the mapping area
3. Create an Expression Transformation and name it appropriately
4. Connect the source table ports to the Expression Transformation ports
5. Right click the Expression Transformation and select 'Edit' to open the Expression Editor
6. In the Expression Editor, add a dummy output port for the field to be calculated/transformed
7. Write the expression in the Expression Editor to calculate/transform the field value based on the business logic
8. Connect the Expression Transformation output port
This document provides instructions for building and using a text classification model within Microsoft Azure to analyze text and route it appropriately. It involves the following steps:
1. Building a text classification model in Azure to analyze healthcare feedback text and tag it.
2. Publishing the trained model and using it via the Predict action in Microsoft Flow to classify new text and parse the results.
3. Adding conditional logic and actions to the flow to email specific feedback text to staff or other departments, depending on the model's classification and a minimum score.
In this presentation, we will see How to make Gantt chart in excel. Gantt chart is a wonderful way of planning and tracking activities in Project Management.
For Video Tutorial: https://youtu.be/haXPykHchaY
For Tutorial:
http://www.edtechnology.in/software-engineering/what-is-gantt-chart-how-to-make-gantt-chart-in-excel/
This document provides a quick reference guide for navigating and using the key tools and functions in Autodesk Navisworks. It outlines the main interface panels, navigation tools, and steps to append files, navigate the model, perform clash detection, use section planes, create search sets, add redlining, and use the timeliner and quantification tools. The guide summarizes the purpose and basic workflows for navigating the model, linking design files, performing clash tests, sectioning the model, creating dynamically updating search sets, marking up clashes, simulating construction schedules, and generating material takeoffs.
The document provides step-by-step instructions for creating an account on the Landscapepad website, adding categories and items, measuring a location to create an estimate, and viewing saved estimates. It outlines the process of registering, setting up a free trial account, adding categories and items, measuring a location to generate an estimate, submitting the estimate, and accessing saved estimates and reports.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
1. 1 | P a g e
Tutorial
Written by
Qasir Riaz
SharePoint 2013 MCSA
QlikView Designer & Developer
2. 2 | P a g e
Table of Contents
Create New Report.........................................................................................................................................................................................3
How to open QlikView Canvas?.............................................................................................................................................................3
How to create Text object?......................................................................................................................................................................4
How to make Connection between QlikView and SQL?.................................................................................................................6
How to Fetch Data from SQL?................................................................................................................................................................8
How to Create List Object?.................................................................................................................................................................... 10
How to Create Convertible Chart? ...................................................................................................................................................... 12
How to Create Drill Down Chart? ........................................................................................................................................................ 17
How to Create Table? ............................................................................................................................................................................. 21
How to apply condition on object?.....................................................................................................................................................23
How to Implements Security? ...............................................................................................................................................................24
How to Publish QlikView? ......................................................................................................................................................................25
3. 3 | P a g e
Create New Report
How to open QlikView Canvas?
Steps:
1. Go to QlikView server.
2. Go to Start menu and click on QlikView 11. you will get QlikView Studio.
3. Click on new file icon you will get main screen where you will draw chart.
4. Click on Grid lines icon now line show on main screen.
Step 1:
Step 2 and 3:
4. 4 | P a g e
Step 4:
How to create Text object?
Steps:
1. Click on Text Object icon. You will get a popup window.
2. Provide Title if you do not want title press space.
3. Click on Apply.
4. Click on Ok.
5. You will get Text Object on canvas.
6. 6 | P a g e
How to make Connection between QlikView and SQL?
Steps:
1. Press Ctrl+E you will get edit screen.
Now you need to Connection String for data fetching from DB.
2. Click on connect, select connection type and click next.
3. Provide sever name, credential, database name and click on OK.
4. You will get Connection String on edit screen.
Step 1
Ctrl + E
Step 2
8. 8 | P a g e
How to Fetch Data from SQL?
Steps:
1. Provide SQL query and give a title for table on edit screen.
2. Go to canvas and press Ctrl+R you will see QlikView console window for couple of second for successful
message.
3. Click on table view icon to view all tables which is fetch from DB basis on your queries.
4. After review come back on Qlikview canvas by click on OK.
Step 1
10. 10 | P a g e
Step 4
How to Create List Object?
Steps:
1. Click on List Object icon. You will get a popup window.
2. Provide Title if you do not want title press space.
3. Select the required field to display in Field dropdown of list object. Field dropdown will be populated
from the fields (columns) specified in query.
4. Check on show frequency.
5. Click on Ok.
6. You will get List Object on canvas.
12. 12 | P a g e
How to Create Convertible Chart?
Steps:
1. Click on Chart icon. You will get a popup window.
2. Provide Title if you do not want title press space.
3. Select chart from “Chart type” panel this type of chart show on page load.
4. Select chart types from “Fast type change” panel. When you click on top right corner of icon of chart
title bar chart will convert into another type of chart on runtime by user. Click on Next.
5. Select field on which you want to create chart. Click on Next.
6. Write expression for chart dimension. “=Count(initiator)” every expression start from “=” , “Count()” is a
built in function of QlikView. QlikView provide a lot of function you see in intellisense. And “initiator” is
column name which is fetch from DB. After write an expression Click on OK.
7. You select different addition line like: Average, then press Next.
8. Select chart look and chart orientation I am selecting horizontal orientation. Then click on Next.
9. Click on Finish.
10. You will get a chart on Canvas.
11. Click top right corner of toolbar “Fast type change” icon your chart will convert into another type.
12. Click again on it and enjoy.
Step 1, 2, 3 and 4
17. 17 | P a g e
How to Create Drill Down Chart?
Steps:
1. Go to chart properties by right click menu.
2. Go to Dimensions tab. Remove fields.
3. Click on edit group.
4. For create new group click on New…
5. You get a popup window now provide group name, select drill-down group, select fields in drill down
sequence and click on Add> then click on OK.
6. For verify member columns select group and review column’s name on right panel then click OK.
7. Add this group in used dimension and click Apply then click OK.
8. Now this chart group value on the basis of first field like: “month”. When you click on any bar, chart will
group value on the basis on second field like: “request type” in particular first field (month) value.
9. When you click on any bar, chart will group value on the basis on third field like: “Initiator” in particular
second field (request type) value.
10. When you click on any bar, chart will show initiator name.
Step 1
21. 21 | P a g e
Step 10
How to Create Table?
Steps:
1. Click on Chart icon. You will get a popup window.
2. Provide Title if you do not want title press space.
3. Select Fields and click on Add>.
4. Verify Fields and click on Apply then click OK.
5. Table show on canvas.
23. 23 | P a g e
Step 5
How to apply condition on object?
Steps:
1. Go to chart properties by right click menu.
2. Go to Layout tab select Conditional and write expression like: =GetSelectedCount(Initiator)>0
3. “GetSelectedCount” is built in method of QlikView “Initiator” is DB column this expression mean this grid
will show only when selected initiator count will be greater than 0 (when any initiator selected).
Step 1, 2 and 3
24. 24 | P a g e
How to Implements Security?
Steps:
1. Go to QlikView canvas properties by right click menu.
2. You will get popup window click on security tab.
3. Check or uncheck permission from user privilege panel.
4. Check or uncheck Apply to all sheets
5. Click on OK.
Step 2, 3, 4 and 5
25. 25 | P a g e
How to Publish QlikView?
Steps:
1. Go to start menu click on QlikView folder.
2. Click on QlikView Access Point.
3. You will see a webpage open in browser. This page contains QlikView deployed report.
4. Go to start menu click on QlikView folder.
5. Click on QlikView Management Console.
6. You will see another webpage open in browser.
7. Go to on System Tab.
8. Go to Setup Tab.
9. Click QlikView Server.
10. Click any QlikView server. In my case I have only one server.
11. Go to Folder Tab.
12. Provide Report name.
13. Provide Report path.
14. Check or uncheck browser able.
15. Click on Apply.
Step 1 and 2