Having 21 years\' of experience in EPC projects specializing at Construction/Operation of Oil & Gas facilities, GOSP (Gas Oil Separation Plant), Solid Handling Facilities, Desalination Plant, & Water/Gas/Oil Pipeline; being a part of the core team which is engage in Overseas projects, has the capabilities to covers the services in Mechanical, Piping, Structural, Civil & Architectural.
Responsible for Engineering/Vendor Documentation, Review & Approval of all NMR Documentation by coordinating with Engineering, Procurement & Vendors, preparation of PRB (Project Record Books) as well as experience of CAD for preparation of IFC – Construction, RED lines, Temporary Site Facilities, 3D & As-Built Drawings for EPC Projects.
In additional I had completed the course in PDS Intergraph Piping Design including Smart Plant Review in Argentina – Buenos Aires & Completed the course in Aramco Quality Management System for Capital Projects in Aramco Professional Engineering Development Division.
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
Power Presentation On Railway Track Fault DetectorNEERAJ SINGH
This power presentation basically gives you ideas about railway track fault detector using ZIGBEE as sensor(i.e for communication) and differents series of PIC Microcontrooler.
Technological innovations in the field of disease prevention and maintenance of patient health have enabled the evolution of fields such as monitoring systems. Heart rate is a very vital health parameter that is directly related to the soundness of the human cardiovascular system. Heart rate is the number of times the heart beats per minute, reflects different physiological conditions such as biological workload, stress at work and concentration on tasks, drowsiness and the active state of the autonomic nervous system. It can be measured either by the ECG waveform or by sensing the pulse - the rhythmic expansion and contraction of an artery as blood is forced through it by the regular contractions of the heart. The pulse can be felt from those areas where the artery is close to the skin. This paper describes a technique of measuring the heart rate through a fingertip and Arduino. It is based on the principal of photophelthysmography (PPG) which is non-invasive method of measuring the variation in blood volume in tissue using a light source and detector. While the heart is beating, it is actually pumping blood throughout the body, and that makes the blood volume inside the finger artery to change too. This fluctuation of blood can be detected through an optical sensing mechanism placed around the fingertip. The signal can be amplified and is sent to Arduino with the help of serial port communication. With the help of processing software heart rate monitoring and counting is performed. The sensor unit consists of an infrared light-emitting-diode (IR LED) and a photo diode. The IR LED transmits an infrared light into the fingertip, a part of which is reflected back from the blood inside the finger arteries. The photo diode senses the portion of the light that is reflected back. The intensity of reflected light depends upon the blood volume inside the fingertip. So, every time the heart beats the amount of reflected infrared light changes, which can be detected by the photo diode. With a high gain amplifier, this little alteration in the amplitude of the reflected light can be converted into a pulse.
Weigh-in-motion systems are used to determine the weight of vehicle while it is in motion. It is used for vehicle overweight enforcement. Various classifications and types of WIM systems - pavement-based, bridge-based, low-speed and high-speed WIM etc are included. Status of WIM implementation in India is also stated in the presentation
This paper deals with the manufacturing of a Prototype of Rotary Car Parking System using Sensors. Lack of space availability has always been a problem in urban areas and major cities and to add to it there are cars parked callously on the streets that further limit the space. In order to handle the issue of parking in busy places various types of vehicle parking systems are used worldwide Rotary Automated Car Parking System and many more. This thesis work is aimed to develop a scale down working model of a car parking system which will reduce the excess use of land space. This total prototype is powered by unipolar stepper motor. This model also uses a RFID Tag and Reader. When the car comes on the ramp the switch will be activated and the pallet comes to carry the vehicle. When the switch will be operated by the operator, sprockets starts to rotate and the new space will be adjusted for new vehicle. Planners, developers, architects are finding out solutions to tackle this problem of parking, so took this opportunity to bring this technology of an automated parking system which will reduce a lot of land space for parking purpose. By testing and analyzing the working model definitely get the view to develop the parking lots at difficult and busy commercial places. Aye Aye Nyein | Ohnmar Win "RFID Based Rotary Car Parking System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27852.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/27852/rfid-based-rotary-car-parking-system/aye-aye-nyein
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
Power Presentation On Railway Track Fault DetectorNEERAJ SINGH
This power presentation basically gives you ideas about railway track fault detector using ZIGBEE as sensor(i.e for communication) and differents series of PIC Microcontrooler.
Technological innovations in the field of disease prevention and maintenance of patient health have enabled the evolution of fields such as monitoring systems. Heart rate is a very vital health parameter that is directly related to the soundness of the human cardiovascular system. Heart rate is the number of times the heart beats per minute, reflects different physiological conditions such as biological workload, stress at work and concentration on tasks, drowsiness and the active state of the autonomic nervous system. It can be measured either by the ECG waveform or by sensing the pulse - the rhythmic expansion and contraction of an artery as blood is forced through it by the regular contractions of the heart. The pulse can be felt from those areas where the artery is close to the skin. This paper describes a technique of measuring the heart rate through a fingertip and Arduino. It is based on the principal of photophelthysmography (PPG) which is non-invasive method of measuring the variation in blood volume in tissue using a light source and detector. While the heart is beating, it is actually pumping blood throughout the body, and that makes the blood volume inside the finger artery to change too. This fluctuation of blood can be detected through an optical sensing mechanism placed around the fingertip. The signal can be amplified and is sent to Arduino with the help of serial port communication. With the help of processing software heart rate monitoring and counting is performed. The sensor unit consists of an infrared light-emitting-diode (IR LED) and a photo diode. The IR LED transmits an infrared light into the fingertip, a part of which is reflected back from the blood inside the finger arteries. The photo diode senses the portion of the light that is reflected back. The intensity of reflected light depends upon the blood volume inside the fingertip. So, every time the heart beats the amount of reflected infrared light changes, which can be detected by the photo diode. With a high gain amplifier, this little alteration in the amplitude of the reflected light can be converted into a pulse.
Weigh-in-motion systems are used to determine the weight of vehicle while it is in motion. It is used for vehicle overweight enforcement. Various classifications and types of WIM systems - pavement-based, bridge-based, low-speed and high-speed WIM etc are included. Status of WIM implementation in India is also stated in the presentation
This paper deals with the manufacturing of a Prototype of Rotary Car Parking System using Sensors. Lack of space availability has always been a problem in urban areas and major cities and to add to it there are cars parked callously on the streets that further limit the space. In order to handle the issue of parking in busy places various types of vehicle parking systems are used worldwide Rotary Automated Car Parking System and many more. This thesis work is aimed to develop a scale down working model of a car parking system which will reduce the excess use of land space. This total prototype is powered by unipolar stepper motor. This model also uses a RFID Tag and Reader. When the car comes on the ramp the switch will be activated and the pallet comes to carry the vehicle. When the switch will be operated by the operator, sprockets starts to rotate and the new space will be adjusted for new vehicle. Planners, developers, architects are finding out solutions to tackle this problem of parking, so took this opportunity to bring this technology of an automated parking system which will reduce a lot of land space for parking purpose. By testing and analyzing the working model definitely get the view to develop the parking lots at difficult and busy commercial places. Aye Aye Nyein | Ohnmar Win "RFID Based Rotary Car Parking System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27852.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/27852/rfid-based-rotary-car-parking-system/aye-aye-nyein
The slide gives overview of slolving current heavy traffic situation by changing minimal infrastructure anfd investing less cost..
This slide is a presentation slide of an international conference named - ICIEV, 2016. And the paper is published in IEEE xplore. The full paper can be found here: http://ieeexplore.ieee.org/abstract/document/7760025/
Here you will find details about how you can make a fire detection system by using arduino and flame sensor. We have also added the budget you need to make this project.
It is about technical publication course in bangalore. power point presentation produced by AAPTA technical publication.ltd this course enable you to build a valuable career for aircraft and auto mobile technical publication.
This is the detailed guide of MakePython ESP32 dev kit, With the 12 experiments, the readers will be able to make simple electronic projects with MicroPython on ESP32, and the basic knowledge& setting up of IoT projects.
This presentation talks about Software Defined Vehicles, Automotive Standards including Cyber Security and Safety, Agile Methods like SAFe/Less , Continuous Delivery best practices.
you can be friend with me on orkut
"mangalforyou@gmail.com" : i belive in sharing the knowledge so please send project reports ,seminar and ppt. to me .
Fabrication of Automatic Guided Vehicle Ajith Aravind
Automatic Guided vehicle (AGV) is a part of flexible manufacturing system. Now a days large manufacturing industries use the transportation systems foe various transportation purposes. various types of AGVs are available. Manufacturing and installation of this system is a tough task. The vehicle is designed according to the need and type of transportation, material to be transformed etc.
A results-oriented professional with over 21 years of diversified experience in areas including:
Document Administrator-Engineering & Vendor / CAD Coordinator-CAD & PDS / Commercial Analyst
Experience in managing a large team of engineers & coordination with project managers on all running projects. Supervise and manage all shop drawings of company projects & Co-ordination, monitoring and controlling all RFQ/ TQ and Vendor data review activities.
Knowledge of document control processes and systems on Major Capital Projects.
Responsible for Engineering/Vendor Documentation, Review & Approval of all NMR Documentation by coordinating with Engineering, Procurement & Vendors, Knowledge of document control processes and systems on Major Capital Projects; preparation of PRB (Project Record Books) as well as experience of CAD for preparation of IFC – Construction, RED lines, Temporary Site Facilities, 3D & As-Built Drawings for EPC Projects.
The slide gives overview of slolving current heavy traffic situation by changing minimal infrastructure anfd investing less cost..
This slide is a presentation slide of an international conference named - ICIEV, 2016. And the paper is published in IEEE xplore. The full paper can be found here: http://ieeexplore.ieee.org/abstract/document/7760025/
Here you will find details about how you can make a fire detection system by using arduino and flame sensor. We have also added the budget you need to make this project.
It is about technical publication course in bangalore. power point presentation produced by AAPTA technical publication.ltd this course enable you to build a valuable career for aircraft and auto mobile technical publication.
This is the detailed guide of MakePython ESP32 dev kit, With the 12 experiments, the readers will be able to make simple electronic projects with MicroPython on ESP32, and the basic knowledge& setting up of IoT projects.
This presentation talks about Software Defined Vehicles, Automotive Standards including Cyber Security and Safety, Agile Methods like SAFe/Less , Continuous Delivery best practices.
you can be friend with me on orkut
"mangalforyou@gmail.com" : i belive in sharing the knowledge so please send project reports ,seminar and ppt. to me .
Fabrication of Automatic Guided Vehicle Ajith Aravind
Automatic Guided vehicle (AGV) is a part of flexible manufacturing system. Now a days large manufacturing industries use the transportation systems foe various transportation purposes. various types of AGVs are available. Manufacturing and installation of this system is a tough task. The vehicle is designed according to the need and type of transportation, material to be transformed etc.
A results-oriented professional with over 21 years of diversified experience in areas including:
Document Administrator-Engineering & Vendor / CAD Coordinator-CAD & PDS / Commercial Analyst
Experience in managing a large team of engineers & coordination with project managers on all running projects. Supervise and manage all shop drawings of company projects & Co-ordination, monitoring and controlling all RFQ/ TQ and Vendor data review activities.
Knowledge of document control processes and systems on Major Capital Projects.
Responsible for Engineering/Vendor Documentation, Review & Approval of all NMR Documentation by coordinating with Engineering, Procurement & Vendors, Knowledge of document control processes and systems on Major Capital Projects; preparation of PRB (Project Record Books) as well as experience of CAD for preparation of IFC – Construction, RED lines, Temporary Site Facilities, 3D & As-Built Drawings for EPC Projects.
Productivity has for many years been an issue for the construction site. This paper reviews current
productivity measurement literature, particularly that pertaining on the construction site, and offers
recommendations/suggestions, for improvement of productivity at the site. It also shows that productivity can be
measured by monthly planned/targeted concrete and actual consumption of concrete data. Whereas targeted
concrete is the input value and actual consumption of concrete is the output of the productivity. Considering
single factor type of productivity i.e. concrete we have calculated the productivity for shell and core type of
contract. It also show few reasons, why productivity at construction site is reduced due to improper shuttering,
reinforcement activity.
Dive into the innovative world of smart garages with our insightful presentation, "Exploring the Future of Smart Garages." This comprehensive guide covers the latest advancements in garage technology, including automated systems, smart security features, energy efficiency solutions, and seamless integration with smart home ecosystems. Learn how these technologies are transforming traditional garages into high-tech, efficient spaces that enhance convenience, safety, and sustainability.
Ideal for homeowners, tech enthusiasts, and industry professionals, this presentation provides valuable insights into the trends, benefits, and future developments in smart garage technology. Stay ahead of the curve with our expert analysis and practical tips on implementing smart garage solutions.
You could be a professional graphic designer and still make mistakes. There is always the possibility of human error. On the other hand if you’re not a designer, the chances of making some common graphic design mistakes are even higher. Because you don’t know what you don’t know. That’s where this blog comes in. To make your job easier and help you create better designs, we have put together a list of common graphic design mistakes that you need to avoid.
White wonder, Work developed by Eva TschoppMansi Shah
White Wonder by Eva Tschopp
A tale about our culture around the use of fertilizers and pesticides visiting small farms around Ahmedabad in Matar and Shilaj.
Hello everyone! I am thrilled to present my latest portfolio on LinkedIn, marking the culmination of my architectural journey thus far. Over the span of five years, I've been fortunate to acquire a wealth of knowledge under the guidance of esteemed professors and industry mentors. From rigorous academic pursuits to practical engagements, each experience has contributed to my growth and refinement as an architecture student. This portfolio not only showcases my projects but also underscores my attention to detail and to innovative architecture as a profession.
Transforming Brand Perception and Boosting Profitabilityaaryangarg12
In today's digital era, the dynamics of brand perception, consumer behavior, and profitability have been profoundly reshaped by the synergy of branding, social media, and website design. This research paper investigates the transformative power of these elements in influencing how individuals perceive brands and products and how this transformation can be harnessed to drive sales and profitability for businesses.
Through an exploration of brand psychology and consumer behavior, this study sheds light on the intricate ways in which effective branding strategies, strategic social media engagement, and user-centric website design contribute to altering consumers' perceptions. We delve into the principles that underlie successful brand transformations, examining how visual identity, messaging, and storytelling can captivate and resonate with target audiences.
Methodologically, this research employs a comprehensive approach, combining qualitative and quantitative analyses. Real-world case studies illustrate the impact of branding, social media campaigns, and website redesigns on consumer perception, sales figures, and profitability. We assess the various metrics, including brand awareness, customer engagement, conversion rates, and revenue growth, to measure the effectiveness of these strategies.
The results underscore the pivotal role of cohesive branding, social media influence, and website usability in shaping positive brand perceptions, influencing consumer decisions, and ultimately bolstering sales and profitability. This paper provides actionable insights and strategic recommendations for businesses seeking to leverage branding, social media, and website design as potent tools to enhance their market position and financial success.
1. Civil / Mechanical / Piping / Architect / Structural / Electrical / Instrument
Renold Pereira Saudi address:
Baba Arcade, Flat No.301, Saudi Techint Ltd.
Sector 11, Vashi, New Bombay-400703. P.O. Box 12780,
INDIA. Dammam 31483, K.S.A.
E-mail: renold_pereira@yahoo.com E-mail: Renold.PEREIRA@techint.it
Res. Tel.:0091-22-27661945 / 9322867812 Mobile: 00966-502557656 / 558844162
http://renold.byethost16.com
RELIGION : Christian
MARITAL STATUS : Married
July 1986 Education Qualification
Jamia Millia University
New Delhi, India.
Passed the Bachelor of Arts held in 1986 with First Division.
March 1994 Technical Qualification
Nalanda Computer Education
Bombay, India.
Completed Diploma in Computer Aided Design featuring AutoCAD.
1988 - 1990
Industrial Training Institute - ITI
Government Recognized, Dadar, Bombay.
Diploma in ‘Mechanical Design Draftsman’ securing First Division.
Fr. Agnel Trade School
Bandra, Bombay.
Completed the course in the trade of ‘Mechanical Draftsman’ held in 1988 Diploma securing
Grade ‘A’
Techint Engineering & Construction - Argentina:- 2007
Buenos Aires - Argentina
Completed the course in PDS Intergraph Piping Design including Smart Plant Review &
Microstation for PDS in Edificio Bouchard Plaza, Argentina – Buenos Aires
Aramco Professional Engineering Development Division
Al-Khobar, Saudi Arabia.
Completed the course in Aramco Quality Management System for Capital Projects
http://www.renold.byethost16.com Page 1 of 8
http://sa.linkedin.com/in/renoldpereira
2. Computers and Applications
Operating Systems: Windows & MS-Dos Familiar with Hardware & Software installation.
Professional Software’s & Applications:
TDC- Workspace Documentum, AutoCAD Release - 2012 with the knowledge of 3D.
Intergraph MicroStation V8, PDS- Intergraph Piping design & Access Data Base.
Microsoft Windows and related applications:
Proficient with MSOffice - Excel, Word, MS PowerPoint Presentation, MS Front Page, MS
Publisher, MS Project.
Client Networking:
Saudi Aramco ECN-Electronic Contracting Network.
Software related to Graphic:
Adobe Photoshop CS5 & Adobe Packages, Ulead System: (Photo & Video Studio), Corel
Draw, Digital Makeover Studios, PhotoAnimator, GIF Animation, Morph Studio.
Web Designing: Master in Web Designing with all equipped knowledge in internet,
specialize in FTP, Professional in MS Front Page, Adobe Golive, HTML Page etc.
Experience
Over 21 years experience in EPC (Engineering, Procurement and Construction) for large scale
projects: Oil & Gas Industry, Oil Refinery, Petrochemical Plants, Water Transmission Projects
(Desalination Plant), Power Plants, Solid Handling Facilities, GOSP & Water/Gas/Oil Pipeline,
being a part of the core team which is engage in Overseas EPC projects, has the capabilities to
covers the services in Mechanical, Piping, Structural, Civil & Architectural.
Overseas Experience
SAUDI TECHINT LTD. – Italian
(Techint International Engineering & Construction Corporation)
2011 - 2012
Project: YERP - Solid Handling Facilities SP3 (Saudi Arabia - Yanbu)
Project Technical Coordinator: (Saudi Aramco Project)
At present responsible for Technical Documentation & Supervising the Construction of
Temporary Facilities for installation of portable offices & underground system including design
layout for the facilities & handling ongoing Project Construction activities at site by coordinating
with sub-contractors includes the progress of all site activities.
SAUDI TECHINT LTD. – Italian
(Techint International Engineering & Construction Corporation)
2010 - 2011
Project: Bidding Projects (Saudi Arabia - AlKhobar)
Project Commercial Coordinator (Commercial Analyst): (Saudi Aramco Projects)
Responsible & Handling all the commercial activities including Job explanation meetings & Site
visit, to produce the entire reports of the site visit task along with the scope of work, preparation
of PQ (Pre-Qualifications), Group Presentation, Brochure/Magazine Art work for Company.
Working on ECN (Saudi Aramco Electronic Contracting Network) & other client networks, follow-
up of Question/Answers of Client’s, communicating with bidders for the latest updates, follow-up
of RFQ (Quotation offers) for WR & MR from sub-contractors/vendors for tender requirements
including declaration letter from sub-contractors.
Organizing commercial tree in network according to the client’s incoming/outgoing documents for
easy access in network with all latest documentation of bid/project records for (Bidding,
Awarded, Not-Awarded & Decline) Projects.
http://www.renold.byethost16.com Page 2 of 8
http://sa.linkedin.com/in/renoldpereira
3. SAUDI TECHINT LTD. – Argentinean
(Techint International Engineering & Construction Corporation)
2009 - 2010
Project: Tanajib-Manifa 18” RTR Pipeline Project (Saudi Arabia - Tanajib-Manifa)
Project Technical Coordinator: (Saudi Aramco Project)
Technical Coordinator: Handling technical issue including the entire technical documents data
base in WorkSpace Documentum & Responsible for Engineering & Vendor documentation, by
organizing TDC department with teamwork.
CAD Coordinator: Organized CAD Department in completion of project for Construction,
Redlines, AsBuilt & Punch list items.
Status: Worked in this Project for Saudi Aramco from the beginning of the Construction till
Commissioning, Start-Up & stayed during the Maintenance period until the Final Acceptance of
the Project.
During the initial stage organizing all the data base & procedure to fulfill all the requirements for
the project, coordinating with the Engineers, Vendors & Expediting department to expedite &
evaluate all the necessary documents for Construction.
SAUDI TECHINT LTD. – Argentinean
(Techint International Engineering & Construction Corporation)
2006 - 2009
Project: Khursaniyah Pipeline - Upstream & Downstream Pipelines Project (Saudi Arabia
- Khursaniyah.)
Project Technical Coordinator: (Saudi Aramco Project)
Technical Coordinator: TDC Responsible & Handling technical issue including the entire
technical documents data base in WorkSpace Documentum for Engineering & Vendor
documentation, organized TDC department under my teamwork.
CAD Coordinator: Organized CAD Department in completion of project for Construction,
Redlines, AsBuilt & Punch list items.
Status: Worked in this Project for Saudi Aramco from the beginning of the Construction, during
the initial stage organizing all the data base & procedure to fulfill all the requirements for the
project, coordinating with the Engineers, Vendors & Expediting department to expedite &
evaluate all the necessary documents for Construction.
Responsible for Engineering / Vendor Follow-up Documents for Approval & Project Record
Books [PRB's]
Preparing Construction / 3D Fabrication Drawings, Redlines for As Builts in CAD Department.
TECHINT LTD. – Argentinean
(Techint International Engineering & Construction Corporation)
2007
Project: Petrotrin Refinery Project (Argentina – Buenos Aires)
PDS Intergraph Piping Designer: Mechanical / Piping.
Completed the Training course in PDS Intergraph Piping Design including the Smart Plant
Review & Microstation for PDS in Edificio Bouchard Plaza, Argentina – Buenos Aires.
Practical Experience: Worked in Petrotrin Project at Colones in Buenos Aires.
http://www.renold.byethost16.com Page 3 of 8
http://sa.linkedin.com/in/renoldpereira
4. SAUDI TECHINT LTD. – Argentinean
(Techint International Engineering & Construction Corporation)
2003 - 2006
Project: Haradh Gosp-3, Gosp-2, Hawips- Al Crude Increment Facilities Project (Saudi
Arabia - Haradh)
Project Technical Coordinator: (Saudi Aramco Project)
Technical Coordinator: TDC Responsible & Handling technical issue including all the technical
documents data base in WorkSpace Documentum for Engineering & Vendor documentation,
organized TDC department under my teamwork.
CAD Coordinator: Organized CAD Department in completion of project for Construction,
Redlines, AsBuilt & Punch list items.
Status: Worked in this Project for Saudi Aramco from the beginning of the Construction, Land
Preparation till Commissioning, Start-Up & stayed during the Maintenance period until the Final
Acceptance of the Project.
Responsible for Engineering / Vendor Follow-up Documents for Approval & Project Record
Books [PRB's]
Preparing Construction & Facilities Drawings, Redlines for As Builts in CAD Department.
SAUDI TECHINT LTD. – Argentinean
(Techint International Engineering & Construction Corporation)
1998 - 2003
Project: Desalination Plant & Pumping Stations (Saudi Arabia - Yanbu) (SWCC Project)
CAD Supervisor: (Mechanical / Piping / Civil / Architectural / Electrical): worked on Project
based on the contract of constructing Desalination Plant, Reservoirs Stations from Yanbu to
Madinah in Saudi Arabia.
Organized CAD Department in completion of project for Construction & As Built.
Status: Worked in this Project for Saline Water Conversion Corp. from the beginning of the
Construction till Commissioning, Start-Up & stayed during the Maintenance period until the Final
Acceptance of the Project.
Assignment to Buenos Aires - Argentina in 1998.
SAUDI TECHINT LTD. – Argentinean
1994 - 1998 (Techint International Construction Corporation )
Project: Yanbu - Madinah Pipeline (Saudi Arabia - Yanbu) (SWCC Project)
CAD Supervisor: (Mechanical / Piping / Civil / Electrical): worked on Project based on Laying of
the Pipelines from Yanbu to Madinah which comprises 4 main pumping station, 8 minor stations,
and several line valve station and tap off station along the line in Saudi Arabia.
Organized CAD Department in completion of project for Construction & As Built.
Status: Completed this Project of Pipeline from the beginning of the Construction till
Commissioning & Maintenance period, simultaneously got into the next project of Pumping
Station for Pipeline.
SAIPEM IRAN – Italian
1992 - 1993
(Multinational Construction Company for Onshore & Off shore Projects)
Project: 7th Refinery of Iran (IRAN - Arak)
CAD Operator / General Draftsman: worked for preparing Engineering design drawings of
Construction & Fabrication (Piping, Structural, Civil & Architectural) for 7th Refinery in Arak - Iran
Status: Completed this Project of 7th Refinery from the beginning of the Construction till Testing
& Commissioning period, stayed until the Final Acceptance of this Project.
http://www.renold.byethost16.com Page 4 of 8
http://sa.linkedin.com/in/renoldpereira
5. SAIPEM IRAN – Italian
1990 - 1992 (Multinational Construction Company for Onshore & Off shore Projects)
Project : Gas injection – Iran (IRAN - Ahwaz)
CAD Operator / General Draftsman: worked on the complete design, Engineering as well as
Construction drawings (Piping, Structural, Civil and Electrical) for Karang Gas Injection project in
Ahwaz -Iran
Status: Completed this Project of Gas Injection plant from the beginning of the Construction
th
stayed till the period of Testing & Commissioning later assigned to the new project of 7 Refinery
of Iran.
Experience in India
MONSHER ENTERPRISES - Bombay
1988 - 1990 (Fire Fighting Company)
Project: Erecting & Installation of Fire fighting system.
Mech./ Piping Draftsman: managing Mechanical, Piping and Electrical designing detail
drawings for Erection & Commissioning of Hydrant, Sprinkler & Fire alarm system for
Multistoried buildings, Hospitals, Cinema hall etc...
Status: Completed various Projects with Testing-Commissioning & Start-Up.
Types of work handled
TDC Administrator
(Technical Document Coordinator)
TDC Responsible & Handling all the Technical documents data base in WorkSpace Documentum &
Coordinating Technical department under teamwork.
Vendor Documentation:
• Responsible for Review & Approval of all NMR documentation, Coordinating with vendor to claim the
entire vendor documents for NMR 601, 602 & Final Dossier NMR 603 packages.
• Coordinating with Expediting & Engineering department to expedite all the documents for approval & to
inform & give the approval for Vendors for starting the manufacture, Highly Knowledge of all Vendors
and Engineering package Documents.
• Follow up with Vendors to incorporate all comments in NMR 601 documents & to claim NMR 602 certified
documents from Vendor for manufacture & maintaining the updated Database.
• Responsible to complete the NMR 603 Final Documentation by coordinating with Vendors to claim all the
Final Certified NMR packages for incorporating in PRB (Project Record Books)
• Administrated the Documentum & Technical department with team work & maintaining all records in data
base for easy access of all NMR & Engineering documentation for all Users.
• Supervision: Transmittals for Internal site distribution & External to Aramco including updating database
for records with Aramco Requirements.
• Seeking Approval from Aramco & Engineering dept. for NMR 602 Vendor Documents.
http://www.renold.byethost16.com Page 5 of 8
http://sa.linkedin.com/in/renoldpereira
6. Engineering Documentation:
• Handling all the IFC & As-Built Engineering drawings: Latest Documentation Records / Modification /
Plotting / issuing drawings & documents for Aramco & for Site Construction through official transmittals
including updating Documentum database for records.
• Responsible for maintaining latest revision of drawings & documents at Site for Construction, through
internal distribution & coordinating with site supervisor.
• Follow up of Redline drawings & Documentation from Construction Site & maintaining records of
Engineering Query for As built updates.
• Responsible for preparation of PRB (Project Record Books) with the help of Engineering drawings /
documents & Vendor NMR 603 Final Certified Documents under teamwork.
• Organizing weekly meeting MOM with management to highlight the progress status & activities.
• BID Coordinator in preparation of Bid packages, follow up of WR & MRs & Quotations from Vendors,
maintain all the records of the documentations to prepare a Bid package.
CAD Coordinator
(Designer / Technical Support)
• Responsibilities include preparation of Construction Drawings for Petrochemical, Oil, Gas, Desalination
Plant & GOSP, Solid Handling Facilities, Piping & Pipeline drawing including Civil, Architectural,
Electrical and Structural drawings.
• Design of Temporary Site Facilities includes installation of portable offices & underground system /
Industrial Factory / Mobilization of existing Camp to site / Site preparation drawing for survey /
Fabrication design engineering drawings for Industry Area / Pipe Shop, Ware House & Pipe yard.
• Specialize in preparing any 3 Dimension Object through ACAD 2012 with Animation to view the concept,
Creating Fabrication 3D Model, A high value in a reputed Organization.
• Experience in PDS Intergraph piping design with Smart Plant Review modules, displaying key frame
motion & creating walk through animation in model, creating advance sketching & specialty placement
through piping design & extracting isometric from modules etc.
• Responsible for Project As-Built Drawings & Documentation by implementing Aramco SACS Standards
arranging soft files according to DCC (Design Completion Certificate), Responsible for uploading As-
built drawings in Aramco PlantDoc System by creating ASCII file format for uploading all IFC & As-Built
Drawings & Documentation in PlantDoc System, with Aramco procedure SAEP-334 & SAES-A202.
• Experience in using various Software to develop Creative work in 3D Graphic & Animation with
Presentation
• Preparation of Pipeline drawings showing Profile related with Topographical plane including World
Coordinates, Locations details. Section Profile showing Pipeline Chainage, Natural ground elevation &
Top of pipe in Alignment sheet by using AutoLSP. Efficient in World Coordinate
• Layout of Piping, Section of layout, Piping Isometric drawing, Drainage & Storm water Piping drawing,
General arrangement.
• Preparation of Redlines for As Built drawings & Punch list items & Workshop Fabrication Drawings.
• Hydrotest diagrams for piping including Documents, Flow diagram & P&ID diagram.
• Electrical diagrams, Panel board diagrams, Cable rooting and cable tray drawings.
• Instrumentation drawings, Flow diagram, P & ID drawings, Wiring booklets.
http://www.renold.byethost16.com Page 6 of 8
http://sa.linkedin.com/in/renoldpereira
7. • Fire Alarm Layout drawings for, Hydrant, Sprinkler & Fire Alarm system etc.
• Civil drawings for Building, Shafts- plans, sections, elevations including Formwork & Reinforcement,
Design drawings for Foundation, Roads & Access road according to contract specification.
• Architectural layout drawings for buildings, Landscaping & Irrigation system for plants, Roads & Sign
boards. Mechanical Drawings for Equipments & Scraper Trap.
• Project Route Maps showing the Location & Concept of the Project in Color Presentation.
• All types of drawings for Design, Object and Fabrication drawings of Pipe support / Structural drawings
in 3 Dimension Drawing with ACAD 2012.
• Bill of material & weight for designed the layout and all types of drawings for Piping, Structural & Civil.
COMMERCIAL Coordinator
(Analyst / Technical Support)
• Responsible & Handling all the commercial activities including Job explanation meetings & Site visit, to
produce the entire reports of the site visit task along with the scope of work, preparation of PQ (Pre-
Qualifications), Group Presentation, Brochure/Magazine Art work for Company.
• Experience in ECN (Saudi Aramco Electronic Contracting Network) & other client networks, follow-up of
Question/Answers of Client’s, communicating with bidders for the latest updates, follow-up of RFQ
(Quotation Offers) for WR & MR from sub-contractors/vendors for tender requirements including
declaration letter from sub-contractors.
• Organizing commercial tree in network according to the client’s incoming/outgoing documents for easy
access in network with all latest documentation of bid/project records for (Bidding, Awarded, Not-
Awarded & Decline) Projects.
Specialize
• In Vendor & Engineering documentation for review & approval, maintaining the records of all latest
documentation in Documentum data base under team work.
• In Coordination with Expediting, Engineering & Vendors related with drawings & documentation.
• In preparing Final documentation for Engineering IFC Construction drawings / As-Builts & Vendor
Dossier for Final certified NMR 603 Documentation.
• In preparing any 3 Dimension objects for workshop fabrication in ACAD 2012, with Animation to view the
concept, Creating Fabrication 3D Model including Pipe support & Structural 3D objects, A high value in a
reputed Organization.
• Experience in using various Software to develop Creative work (3D Graphic & Animation)
• Bill of material & weight for designed the layout and all types of drawings for Piping, Structural & Civil.
• Presentation drawings with Animation to view the concept, Planning & Progress chart, highly skilled in
all Microsoft Applications include Kickoff Meeting Presentation.
• Project Route Maps showing the location & Project details in presentation.
• As Built drawings as per site construction & redlines, arranging & maintaining all the magnetic files in
Network & Back up for final submission.
• Punch list items and material take-off list for the completion & hand over of project.
• PRB Documents handling for preparation of Project Manuals & Soft copy with hyperlinks to Index.
http://www.renold.byethost16.com Page 7 of 8
http://sa.linkedin.com/in/renoldpereira
8. • All types of ART work presentation in Raster images or Vector files.
• Specialize in Graphic images to Edit & modify any graphic file in Adobe Photoshop CS5.
• Proficient in using AUTO CAD Rel. 2012 with 3D knowledge.
• Organizing TDC / CAD / COMMERCIAL department with Aramco Requirements.
• Master in Web designing with all equipped knowledge in internet.
Additional works handled
• Supervised the CAD Team by organizing the CAD Department in various field of Construction & in As
Built drawings for the completion of project.
• Prepared a Project Presentation for “Techint Group of Companies” for over all project in the World.
• Site Preparation & Design of Temporary Site Facilities, Industrial Factory & Pipe Yard / Mobilization of
existing Camp to site / drawing for survey / Fabrication design engineering drawings for Industry Area /
Pipe Shop, Ware House & Tents, Supervising the site activities & its progress report.
• Responsible for Workshop Fabrication & Assignment to site for supervision.
• Coordinating with sub-contracts arranging meetings for all the necessary requirements & follow ups.
• Presentation Job, Slide Show, Animation, Preparing Progress chart, schedule chart, Organization chart,
Up-dating Punch List, daily activities & Manpower.
• Specialized in ART work, 3D Logo & Creative jobs. Creating Ad work for Saudi MEED Magazine (A high
value in a reputed Organization)
• To Close Punch list items, Spare parts for Pre-commissioning and material take-off list.
• Handled System & network in trouble shooting with the software knowledge & its installation.
• Commercial activities: attending Job Explanation Meeting & Site Visit for new Bidding Projects.
• Supervising the site activities, coordination with sub-contractor, preparing site activities progress report.
Extra curricular activities
• Organized the Science Exhibition presenting my group in the State level contest in India.
• Represented in the Greater Bombay Science exhibition securing First prize in Bombay.
• Completed Aramco Quality Management System for Capital Projects.
Passport details
• H-H7779739
• Place of issue: Riyadh
• Date of Issue: 24th Nov. 2009
• Valid: 23rd Nov. 2019
SIGNATURE : DATE:
http://www.renold.byethost16.com Page 8 of 8
http://sa.linkedin.com/in/renoldpereira