Presentation23.pptx
•Download as PPTX, PDF•
0 likes•5 views
The document describes several standard library faceplates for automation control including faceplates for drives with motors, feeder selection, double direction valves with limit switches, weighing hoppers, and single direction motors with operating time and current details. The faceplates provide status indicators and selection options for automated equipment components commonly used in industrial automation applications.
Report
Share
Report
Share
Recommended
Presentation1.pptx
The standard library document describes several industrial control system interface elements including motor status indicators, valve icons, drive and motor selection faceplates, weighing hopper details, and single direction motor controls. The interfaces provide selection and status information for motors, drives, feeders, valves and weighing systems to allow operators to monitor and control industrial automation equipment.
Plano electrico D8T.pdf
This document provides a summary of key electrical components for a track-type tractor, including their schematic symbol locations and physical machine locations. Over 50 components are listed, such as the alternator, batteries, sensors, solenoids, lamps, and controls. The components are organized in a table with their schematic symbol and corresponding machine location.
Clutch & Transmission System.pptx
This document provides an overview of a training module on transmission and clutch systems. The module objectives are to perform basic checks, maintenance, dismantling and assembly of transmissions and clutches. The agenda covers Allison automatic transmissions, ZF manual gearboxes, and clutch system overhauling. Preventive maintenance tips are provided for transmissions, including fluid level checks, fluid and filter changes. Components and operation of Allison transmissions are explained. Practical exercises include identifying gearbox components, checking fluid levels, and removing/refitting a gearbox.
Flow divider presentation
This document provides an overview of flow divider/combiner valves. It describes their main functions of dividing and combining fluid flow from multiple sources. Key features include interlocking spools to maintain even flow splits under varying pressure drops and ratios that can be customized. Typical applications include hydraulic transmissions where equal drive needs to be provided to multiple actuators. The document outlines Parker's product range and competitors, and provides guidance on proper application and sizing of flow divider valves.
PLANO HIDRAULICO INTERACTIVO 336DL Renr99800001
This document provides a schematic for the hydraulic system of an excavator. It includes symbols for hydraulic components and their connections. The schematic can be navigated using blue hyperlinks and bookmarks. Component locations and identification numbers are listed in tables for reference.
pneumaticcircuits-140111054249-phpapp01 (2).pdf
This document provides an introduction to basic pneumatic circuitry for control and automation. It covers common pneumatic symbols used to represent components like cylinders, valves, and other devices. It also discusses layout of circuit diagrams and examples of actuator control using different types of valves, including 2/2 valves, 3/2 valves, and 5/2 valves. Flow control devices like restrictors are described for independently controlling actuator speeds.
Pneumatic circuits.pptx
The document discusses basic pneumatic circuitry and components for control and automation. It covers common symbols used to represent pneumatic components in circuit diagrams according to ISO standards. It then provides examples of how 2/2, 3/2, and 5/2 valves can be used to control single-acting and double-acting pneumatic cylinders, including options for adjusting actuator speed using flow regulators. Safety considerations for trapped air are also mentioned.
Basic pneumatic circuit
This document provides an overview of pneumatic control and automation concepts including:
- Standard symbols for pneumatic components like cylinders, valves, and other devices based on ISO 1219 standards.
- Examples of using 2/2 and 3/2 valves to control single-acting cylinders, and 5/2 valves to control double-acting cylinders. Speed control methods like flow regulators are discussed.
- Sequential control concepts and examples of circuits using multiple cylinders operated in sequence are presented.
Recommended
Presentation1.pptx
The standard library document describes several industrial control system interface elements including motor status indicators, valve icons, drive and motor selection faceplates, weighing hopper details, and single direction motor controls. The interfaces provide selection and status information for motors, drives, feeders, valves and weighing systems to allow operators to monitor and control industrial automation equipment.
Plano electrico D8T.pdf
This document provides a summary of key electrical components for a track-type tractor, including their schematic symbol locations and physical machine locations. Over 50 components are listed, such as the alternator, batteries, sensors, solenoids, lamps, and controls. The components are organized in a table with their schematic symbol and corresponding machine location.
Clutch & Transmission System.pptx
This document provides an overview of a training module on transmission and clutch systems. The module objectives are to perform basic checks, maintenance, dismantling and assembly of transmissions and clutches. The agenda covers Allison automatic transmissions, ZF manual gearboxes, and clutch system overhauling. Preventive maintenance tips are provided for transmissions, including fluid level checks, fluid and filter changes. Components and operation of Allison transmissions are explained. Practical exercises include identifying gearbox components, checking fluid levels, and removing/refitting a gearbox.
Flow divider presentation
This document provides an overview of flow divider/combiner valves. It describes their main functions of dividing and combining fluid flow from multiple sources. Key features include interlocking spools to maintain even flow splits under varying pressure drops and ratios that can be customized. Typical applications include hydraulic transmissions where equal drive needs to be provided to multiple actuators. The document outlines Parker's product range and competitors, and provides guidance on proper application and sizing of flow divider valves.
PLANO HIDRAULICO INTERACTIVO 336DL Renr99800001
This document provides a schematic for the hydraulic system of an excavator. It includes symbols for hydraulic components and their connections. The schematic can be navigated using blue hyperlinks and bookmarks. Component locations and identification numbers are listed in tables for reference.
pneumaticcircuits-140111054249-phpapp01 (2).pdf
This document provides an introduction to basic pneumatic circuitry for control and automation. It covers common pneumatic symbols used to represent components like cylinders, valves, and other devices. It also discusses layout of circuit diagrams and examples of actuator control using different types of valves, including 2/2 valves, 3/2 valves, and 5/2 valves. Flow control devices like restrictors are described for independently controlling actuator speeds.
Pneumatic circuits.pptx
The document discusses basic pneumatic circuitry and components for control and automation. It covers common symbols used to represent pneumatic components in circuit diagrams according to ISO standards. It then provides examples of how 2/2, 3/2, and 5/2 valves can be used to control single-acting and double-acting pneumatic cylinders, including options for adjusting actuator speed using flow regulators. Safety considerations for trapped air are also mentioned.
Basic pneumatic circuit
This document provides an overview of pneumatic control and automation concepts including:
- Standard symbols for pneumatic components like cylinders, valves, and other devices based on ISO 1219 standards.
- Examples of using 2/2 and 3/2 valves to control single-acting cylinders, and 5/2 valves to control double-acting cylinders. Speed control methods like flow regulators are discussed.
- Sequential control concepts and examples of circuits using multiple cylinders operated in sequence are presented.
B747 Electrical Power
This document provides an overview of the electrical power system on a Boeing 747-400 aircraft. It describes the various AC and DC power buses, and how electrical power is generated, distributed, and controlled throughout normal operations and different failure conditions. Key components include the integrated drive generators, transformer rectifier units, batteries, and external power connections.
Electro-Hydraulic Linear Actuators for Industrial Valves
The REXA Xpac X2L Linear Actuators allow for modulating duty cycle and precise positioning independent of load variation. Hydraulic pressure is generated by an internal positive displacement gear pump driven by a stepper or servo motor with no limitations on starts, stops, or reverse cycles. This self-contained electro-hydraulic system locks the cylinder in place when
no movement is required. This minimizes wear-and-tear on moving components and eliminates unnecessary power consumption.
Comparative Analysis: Single vs. Double Solenoid Valve Configurations
For applications requiring the best quality single solenoid valves in India, consider reputable suppliers offering valves known for reliability, durability, and performance.
KENR82440001.pdf
This document provides locations for electrical components and connectors on a motor grader. It lists over 150 components with their schematic symbol location and corresponding machine location. It also lists 24 connectors with their schematic locations. The document is intended to help technicians locate components and connectors based on schematic diagrams.
18 electronic shift transmissions
The document discusses how modern automatic transmissions use electronic control systems rather than mechanical governors and throttle valves to determine shift points. The computer (ECM) controls line pressure and shift timing through solenoids, including shift solenoids and electronic pressure control solenoids. Sensors provide input data to the ECM, which then outputs signals to solenoids and other components to shift gears. The ECM memory stores shift strategies and can adapt shifting based on driving conditions.
3 Sed2 Bypass Options
There are two main types of variable frequency drive bypass options: conventional and electronic.
Conventional bypass uses hard-wired electrical components like switches, fuses, and relays for mechanical bypass control. Electronic bypass uses electronic logic control with a simple keypad and has reduced wiring and mechanical components for improved reliability.
Electronic bypass components include a control board, output contactor, motor overload relay, and optional line reactor. The electronic keypad displays status and operating configuration using LED indicators and buttons to control the input contactor, enable functions, and hand/remote bypass modes.
Pids
This document provides information about onboard diagnostic (OBD) modes and parameters for Toyota and Lexus vehicles. It lists the 10 standard OBD modes and describes what data each mode provides, such as current diagnostic data (Mode 1), freeze frame data of emission failures (Mode 2), stored diagnostic trouble codes (Mode 3), and abilities to clear information (Mode 4) and view oxygen sensor test results (Mode 5). It also explains continuous versus non-continuous emission monitor tests and readiness test status.
CS533E RODILLO SHEMATIC (1).pdf
This document provides specifications and connector locations for components in the electrical system of a vibratory compactor. It includes two charts: one listing component locations by schematic symbol and machine location, and one listing connector locations by number, schematic symbol, and machine location. It also provides specifications for several switches, including actuation/deactuation parameters and contact positions. Related manuals are referenced. The information is intended to aid in understanding and working on the machine's electrical system.
IL 0 Group II Group I Select GP I Select GP II Solution Basic P.pdf
IL 0 Group II Group I Select GP I Select GP II
Solution
Basic Pneumatic Circuitry For control and automation 2. Contents Introduction Symbols
Circuit layout Actuator control 2/2 Valve Actuator control 3/2 Valve Actuator control 5/2 Valve
Sequential control Sequence solution 5/3 Valves Poppet/spool logic Balanced spool logic
Feedback Click the section to advance directly to it 3. Introduction This module shows the
methods of application of pneumatic valves and components for control and automation The
methods of pure pneumatic sequential control are confined to simple examples The majority of
modern systems are controlled electronically and is the subject of electropneumatic modules A
message to pneumatic circuit designers: Use proven and reliable design techniques Produce
circuits and documentation that are clear to read Design for safety Do not try to be too clever, the
circuit will be difficult for others to read and maintain 4. Symbols The standard for fluid
power symbols is ISO 1219-1. This is a set of basic shapes and rules for the construction of fluid
power symbols Cylinders can be drawn to show their extreme or intermediate positions of stroke
and any length above their width Valves show all states in the one symbol. The prevailing state is
shown with the port connections Other components are single state symbols 5. Symbols single
acting actuators Single acting, sprung instroked Single acting, sprung outstroked Single acting,
sprung instroked, magnetic Single acting, sprung outstroked, magnetic 6. Symbols double acting
actuators Double acting, noncushioned Double acting, adjustable cushions Double acting,
through rod, adjustable cushions Double acting, magnetic, adjustable cushions Double acting,
rodless, magnetic, adjustable cushions 7. Symbols rotary actuators Semi-rotary double acting
Rotary motor single direction of rotation Rotary motor bidirectional 8. Symbols valves 2/2
Valve push button / spring 3/2 Valve detented lever operated 1 3/2 Valve push button / spring 2
10 12 2 10 12 3 2 10 12 3 1 1 9. Symbols valves 3/2 Valve differential pressure operated 2 12 3
10 1 5/2 Valve push button / spring 5/3 Valve double pressure operated spring centre 14 4 5 4 2 5
1 3 2 12 1 3 10. Symbols valves A valve function is known by a pair of numbers e.g. 3/2. This
indicates the valve has 3 main ports and 2 states The valve symbol shows both of the states Port
numbering is to CETOP RP68P and shows: when the valve is operated at the 12 end port 1 is
connected to port 2 when reset to the normal state at the 10 end port 1 is connected to nothing (0)
2 12 10 3 1 11. Symbols valves A valve function is known by a pair of numbers e.g. 3/2. This
indicates the valve has 3 main ports and 2 states The valve symbol shows both of the states Port
numbering is to CETOP RP68P and shows: when the valve is operated at the 12 end port 1 is
connected to port 2 when reset to the normal state at the 10 end port 1 is connected to nothing (0)
2 12 10 3 1 12. Symbols val.
Nanocom defender puma 2.4 + 2.2 manual
This document provides information about using a Nanocom Evolution diagnostic tool to access different models of Land Rover Defender vehicles, specifically the 2.4L and 2.2L diesel "Puma" models from 2007-2015. It details the engine control units, ABS systems, alarm systems, and available diagnostic functions for each vehicle. These include reading and clearing fault codes, viewing live engine data and sensor inputs, and accessing certain component settings. Additional resources for support documentation and forums are also listed.
BLD-AC1000S.pdf
This BLDC driver is a driver independently developed by STEPPERONLINE to cooperate with the field of modern industrial automatic control. It mainly uses the latest high-performance digital logic chips dedicated to brushless motors and adopts PWM technology to make the motor run fast, have low vibration, low noise, good stability and high reliability. This driver is suitable for driving BLDC motors with rated power below 1000W.
Pneumatic circuits
The document discusses basic pneumatic circuitry and components for control and automation. It covers pneumatic symbols, circuit layout principles, and examples of actuator control using 2/2, 3/2, and 5/2 valves. The 2/2 valve uses two valves to admit air to move the actuator in one direction and exhaust air to move it in the other. The 3/2 valve provides inlet and exhaust with one valve. The 5/2 valve simultaneously switches the supply and exhaust paths to control a double-acting actuator.
Operation of hydro power plants
The presentation will give you brief idea about the operation of hydro power plant which includes pre-check conditions, starting and stopping sequences, loading of unit, emergency stopping, parameter monitoring and control.
1 a1
The document provides reference values and normal conditions for various data that can be obtained from a vehicle's ECM using a scan tool. It notes that values may fall outside ranges if the vehicle is operating abnormally and that scan tool data only reflects what the ECM detects and outputs, not necessarily the actual engine or actuator conditions. Various scan tool data are defined, including fuel system status, fuel trims, injection pulse width, ignition timing, and sensor values related to engine operation.
13 c multipoint fuel injection (mpi) 4g9
This document provides information about a Multipoint Fuel Injection system, including:
- An overview of the MPI system components and how it controls fuel injection, idle speed, ignition timing, and includes self-diagnosis functions.
- Specifications for components like the throttle body, sensors, actuators, and control units.
- Diagrams of the control system and how the engine ECU interacts with sensors and actuators.
- Service specifications for items like idle speed, sensor resistance values, and fuel pressure.
- A list of special tools needed for working on and testing the MPI system.
DG application note Pranav.
This document describes a system for synchronizing and load sharing between two diesel generators (DG1 rated at 500kVA and DG2 rated at 320kVA) using L&T PLCs, Schneider EM energy meters and an HMI. The system has four operating modes - manual solo, manual parallel, auto solo and auto parallel. In auto parallel mode, both DGs will start and synchronize to share the load when it exceeds the capacity of the individual DGs. The PLC controls starting, stopping and synchronization of the DGs based on load and maintains voltage and frequency.
962HCATERPILLAR.pdf
This document provides a schematic and definitions for the electrical and hydraulic systems of a machine. It includes tables that list the location of components and connectors in the schematic and on the machine. Blue, underlined text are hyperlinks that can be used to navigate within the document. The document is best viewed at a screen resolution of 1024x768.
Automotive Electricals & Electronics_Chapter 1_Part 2_5th Sem.pptx
This document provides an overview of electrical and electronic components in automobiles. It discusses the purpose and operation of switches, relays, solenoids, buzzers, resistors, and circuit protection devices. It then explains the working of various electromagnetic gauges like temperature gauges, fuel gauges, oil pressure gauges, and speedometers. Features of scan testers are outlined. Finally, the operation of various electrical accessories is described, including windshield wipers, washer pumps, blower motors, electrochromic mirrors, power windows, power seats, and power door locks.
Automation lecture5
The document discusses various topics relating to motor speed control including synchronous speed, rotor speed, pole changes in induction motors, separate winding induction motors, Dahlander motors, circuits to control motor speed with two speeds, examples of motor control circuits, cable diameter calculations, carrying out a control panel, fault detection, counters, and an example project controlling conveyors and a piston.
TEAM SYNERGY
The document proposes an automatic manual transmission system that takes vehicle speed as input. An optical sensor measures output shaft speed and sends the speed signal to a microprocessor-based control unit. The control unit is programmed to shift gears using motors and solenoid valves at specific speeds, engaging and disengaging the clutch accordingly. This provides an automatic transmission with an override for manual control.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaMore Related Content
Similar to Presentation23.pptx
B747 Electrical Power
This document provides an overview of the electrical power system on a Boeing 747-400 aircraft. It describes the various AC and DC power buses, and how electrical power is generated, distributed, and controlled throughout normal operations and different failure conditions. Key components include the integrated drive generators, transformer rectifier units, batteries, and external power connections.
Electro-Hydraulic Linear Actuators for Industrial Valves
The REXA Xpac X2L Linear Actuators allow for modulating duty cycle and precise positioning independent of load variation. Hydraulic pressure is generated by an internal positive displacement gear pump driven by a stepper or servo motor with no limitations on starts, stops, or reverse cycles. This self-contained electro-hydraulic system locks the cylinder in place when
no movement is required. This minimizes wear-and-tear on moving components and eliminates unnecessary power consumption.
Comparative Analysis: Single vs. Double Solenoid Valve Configurations
For applications requiring the best quality single solenoid valves in India, consider reputable suppliers offering valves known for reliability, durability, and performance.
KENR82440001.pdf
This document provides locations for electrical components and connectors on a motor grader. It lists over 150 components with their schematic symbol location and corresponding machine location. It also lists 24 connectors with their schematic locations. The document is intended to help technicians locate components and connectors based on schematic diagrams.
18 electronic shift transmissions
The document discusses how modern automatic transmissions use electronic control systems rather than mechanical governors and throttle valves to determine shift points. The computer (ECM) controls line pressure and shift timing through solenoids, including shift solenoids and electronic pressure control solenoids. Sensors provide input data to the ECM, which then outputs signals to solenoids and other components to shift gears. The ECM memory stores shift strategies and can adapt shifting based on driving conditions.
3 Sed2 Bypass Options
There are two main types of variable frequency drive bypass options: conventional and electronic.
Conventional bypass uses hard-wired electrical components like switches, fuses, and relays for mechanical bypass control. Electronic bypass uses electronic logic control with a simple keypad and has reduced wiring and mechanical components for improved reliability.
Electronic bypass components include a control board, output contactor, motor overload relay, and optional line reactor. The electronic keypad displays status and operating configuration using LED indicators and buttons to control the input contactor, enable functions, and hand/remote bypass modes.
Pids
This document provides information about onboard diagnostic (OBD) modes and parameters for Toyota and Lexus vehicles. It lists the 10 standard OBD modes and describes what data each mode provides, such as current diagnostic data (Mode 1), freeze frame data of emission failures (Mode 2), stored diagnostic trouble codes (Mode 3), and abilities to clear information (Mode 4) and view oxygen sensor test results (Mode 5). It also explains continuous versus non-continuous emission monitor tests and readiness test status.
CS533E RODILLO SHEMATIC (1).pdf
This document provides specifications and connector locations for components in the electrical system of a vibratory compactor. It includes two charts: one listing component locations by schematic symbol and machine location, and one listing connector locations by number, schematic symbol, and machine location. It also provides specifications for several switches, including actuation/deactuation parameters and contact positions. Related manuals are referenced. The information is intended to aid in understanding and working on the machine's electrical system.
IL 0 Group II Group I Select GP I Select GP II Solution Basic P.pdf
IL 0 Group II Group I Select GP I Select GP II
Solution
Basic Pneumatic Circuitry For control and automation 2. Contents Introduction Symbols
Circuit layout Actuator control 2/2 Valve Actuator control 3/2 Valve Actuator control 5/2 Valve
Sequential control Sequence solution 5/3 Valves Poppet/spool logic Balanced spool logic
Feedback Click the section to advance directly to it 3. Introduction This module shows the
methods of application of pneumatic valves and components for control and automation The
methods of pure pneumatic sequential control are confined to simple examples The majority of
modern systems are controlled electronically and is the subject of electropneumatic modules A
message to pneumatic circuit designers: Use proven and reliable design techniques Produce
circuits and documentation that are clear to read Design for safety Do not try to be too clever, the
circuit will be difficult for others to read and maintain 4. Symbols The standard for fluid
power symbols is ISO 1219-1. This is a set of basic shapes and rules for the construction of fluid
power symbols Cylinders can be drawn to show their extreme or intermediate positions of stroke
and any length above their width Valves show all states in the one symbol. The prevailing state is
shown with the port connections Other components are single state symbols 5. Symbols single
acting actuators Single acting, sprung instroked Single acting, sprung outstroked Single acting,
sprung instroked, magnetic Single acting, sprung outstroked, magnetic 6. Symbols double acting
actuators Double acting, noncushioned Double acting, adjustable cushions Double acting,
through rod, adjustable cushions Double acting, magnetic, adjustable cushions Double acting,
rodless, magnetic, adjustable cushions 7. Symbols rotary actuators Semi-rotary double acting
Rotary motor single direction of rotation Rotary motor bidirectional 8. Symbols valves 2/2
Valve push button / spring 3/2 Valve detented lever operated 1 3/2 Valve push button / spring 2
10 12 2 10 12 3 2 10 12 3 1 1 9. Symbols valves 3/2 Valve differential pressure operated 2 12 3
10 1 5/2 Valve push button / spring 5/3 Valve double pressure operated spring centre 14 4 5 4 2 5
1 3 2 12 1 3 10. Symbols valves A valve function is known by a pair of numbers e.g. 3/2. This
indicates the valve has 3 main ports and 2 states The valve symbol shows both of the states Port
numbering is to CETOP RP68P and shows: when the valve is operated at the 12 end port 1 is
connected to port 2 when reset to the normal state at the 10 end port 1 is connected to nothing (0)
2 12 10 3 1 11. Symbols valves A valve function is known by a pair of numbers e.g. 3/2. This
indicates the valve has 3 main ports and 2 states The valve symbol shows both of the states Port
numbering is to CETOP RP68P and shows: when the valve is operated at the 12 end port 1 is
connected to port 2 when reset to the normal state at the 10 end port 1 is connected to nothing (0)
2 12 10 3 1 12. Symbols val.
Nanocom defender puma 2.4 + 2.2 manual
This document provides information about using a Nanocom Evolution diagnostic tool to access different models of Land Rover Defender vehicles, specifically the 2.4L and 2.2L diesel "Puma" models from 2007-2015. It details the engine control units, ABS systems, alarm systems, and available diagnostic functions for each vehicle. These include reading and clearing fault codes, viewing live engine data and sensor inputs, and accessing certain component settings. Additional resources for support documentation and forums are also listed.
BLD-AC1000S.pdf
This BLDC driver is a driver independently developed by STEPPERONLINE to cooperate with the field of modern industrial automatic control. It mainly uses the latest high-performance digital logic chips dedicated to brushless motors and adopts PWM technology to make the motor run fast, have low vibration, low noise, good stability and high reliability. This driver is suitable for driving BLDC motors with rated power below 1000W.
Pneumatic circuits
The document discusses basic pneumatic circuitry and components for control and automation. It covers pneumatic symbols, circuit layout principles, and examples of actuator control using 2/2, 3/2, and 5/2 valves. The 2/2 valve uses two valves to admit air to move the actuator in one direction and exhaust air to move it in the other. The 3/2 valve provides inlet and exhaust with one valve. The 5/2 valve simultaneously switches the supply and exhaust paths to control a double-acting actuator.
Operation of hydro power plants
The presentation will give you brief idea about the operation of hydro power plant which includes pre-check conditions, starting and stopping sequences, loading of unit, emergency stopping, parameter monitoring and control.
1 a1
The document provides reference values and normal conditions for various data that can be obtained from a vehicle's ECM using a scan tool. It notes that values may fall outside ranges if the vehicle is operating abnormally and that scan tool data only reflects what the ECM detects and outputs, not necessarily the actual engine or actuator conditions. Various scan tool data are defined, including fuel system status, fuel trims, injection pulse width, ignition timing, and sensor values related to engine operation.
13 c multipoint fuel injection (mpi) 4g9
This document provides information about a Multipoint Fuel Injection system, including:
- An overview of the MPI system components and how it controls fuel injection, idle speed, ignition timing, and includes self-diagnosis functions.
- Specifications for components like the throttle body, sensors, actuators, and control units.
- Diagrams of the control system and how the engine ECU interacts with sensors and actuators.
- Service specifications for items like idle speed, sensor resistance values, and fuel pressure.
- A list of special tools needed for working on and testing the MPI system.
DG application note Pranav.
This document describes a system for synchronizing and load sharing between two diesel generators (DG1 rated at 500kVA and DG2 rated at 320kVA) using L&T PLCs, Schneider EM energy meters and an HMI. The system has four operating modes - manual solo, manual parallel, auto solo and auto parallel. In auto parallel mode, both DGs will start and synchronize to share the load when it exceeds the capacity of the individual DGs. The PLC controls starting, stopping and synchronization of the DGs based on load and maintains voltage and frequency.
962HCATERPILLAR.pdf
This document provides a schematic and definitions for the electrical and hydraulic systems of a machine. It includes tables that list the location of components and connectors in the schematic and on the machine. Blue, underlined text are hyperlinks that can be used to navigate within the document. The document is best viewed at a screen resolution of 1024x768.
Automotive Electricals & Electronics_Chapter 1_Part 2_5th Sem.pptx
This document provides an overview of electrical and electronic components in automobiles. It discusses the purpose and operation of switches, relays, solenoids, buzzers, resistors, and circuit protection devices. It then explains the working of various electromagnetic gauges like temperature gauges, fuel gauges, oil pressure gauges, and speedometers. Features of scan testers are outlined. Finally, the operation of various electrical accessories is described, including windshield wipers, washer pumps, blower motors, electrochromic mirrors, power windows, power seats, and power door locks.
Automation lecture5
The document discusses various topics relating to motor speed control including synchronous speed, rotor speed, pole changes in induction motors, separate winding induction motors, Dahlander motors, circuits to control motor speed with two speeds, examples of motor control circuits, cable diameter calculations, carrying out a control panel, fault detection, counters, and an example project controlling conveyors and a piston.
TEAM SYNERGY
The document proposes an automatic manual transmission system that takes vehicle speed as input. An optical sensor measures output shaft speed and sends the speed signal to a microprocessor-based control unit. The control unit is programmed to shift gears using motors and solenoid valves at specific speeds, engaging and disengaging the clutch accordingly. This provides an automatic transmission with an override for manual control.
Similar to Presentation23.pptx (20)
Electro-Hydraulic Linear Actuators for Industrial Valves
Electro-Hydraulic Linear Actuators for Industrial Valves
Comparative Analysis: Single vs. Double Solenoid Valve Configurations
Comparative Analysis: Single vs. Double Solenoid Valve Configurations
IL 0 Group II Group I Select GP I Select GP II Solution Basic P.pdf
IL 0 Group II Group I Select GP I Select GP II Solution Basic P.pdf
Automotive Electricals & Electronics_Chapter 1_Part 2_5th Sem.pptx
Automotive Electricals & Electronics_Chapter 1_Part 2_5th Sem.pptx
Recently uploaded
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Recently uploaded (20)
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Presentation23.pptx
- 10. Motor icon showing Emergency, Interlock & Auto/Manual/Local Status Valve icon showing type of valve - Fail to Open or Fail to Close
- 11. Drive Faceplate with 2 motors and 2 Drives
- 12. Faceplate for selection of Drive and respective motor
- 13. Motor Faceplate with 2 motors and 2 Feeder selection and with Local release permission from Operator and showing Motor Last Operating time, Total Operating time and Current drawn
- 14. Faceplate for selection of Feeder and respective motor
- 15. Faceplate for Double Direction Valve with 2 limit switches for both Open & Close directions
- 16. Faceplate for selection of Selection of Limit Switches
- 17. Faceplate for Weighing Hopper details
- 18. Faceplate for Single Direction motor with Local release permission from Operator and showing Motor Last Operating time, Total Operating time and Current drawn