Heat generation in aerobic culture
•Download as PPTX, PDF•
2 likes•1,151 views
This document is a self-study submission for a Biochemical Engineering course, submitted by Sirajudheen K V with USN 1RV13CH032. It discusses a study on heat production by ruminal bacteria in continuous culture and its relationship to maintenance energy, including sections on introduction, heat generation and removal, a typical study, and references.
Report
Share
Report
Share
Recommended
Biotechnology:Bioprocess development and technology
Bioprocess development and technology-Introduction,History of bioprocess,Milestones of Bioprocess development,Bioprocess development,Impact on Biotechnology
Scale up process or Bioreactor scale up or Upstream process
what is scale up ?
Lab scale, Pilot scale, Industrial scale
Bioreactor scale up process
Upstream process
Packed bed reactor
This presentation gives all the required information about pack bed bioreactor, including, advantages, disadvantages, applications and even how to overcome the disadvantages. Packed bed bioreactor is the major type of bioreactor used in waste water treatment as it involves the usage of catalyst. There are different types of packed bed bioreactors and they are used according to the desired product. There is picture representation and also tabular form of differentiation.
I have also mentioned the references at the end.
Bioprocess engineering pressure measurement and control
This document discusses pressure measurement and control in bioreactors. It describes two common pressure sensors - the Bourdon tube and diaphragm-type. The Bourdon tube uses a curved tube that straightens with increasing pressure to move a pinion and pointer. The diaphragm measures low pressures by flexing a diaphragm and levering a pointer. Pressure must be controlled to maintain sterility and gas solubility. Pressure reduction and retention valves are used to regulate pressure between sections.
Aqueous two phase extraction
The document discusses aqueous two-phase extraction (ATP), a separation method used in downstream protein processing. ATP uses the partitioning of proteins between two immiscible aqueous phases formed by mixing polymers like PEG and dextran, or polymers and salts. Several factors affect partitioning, including biomolecule properties, polymer/salt concentrations, pH, and temperature. ATP has advantages over organic solvent extraction as it is milder and lowers interfacial stress on proteins. The document outlines applications of ATP in purifying pharmaceutical proteins, antibodies, enzymes, antibiotics, amino acids, and other compounds. It also summarizes a research paper on using ATP to purify lipase from rice bran.
Protein based nanostructures for biomedical applications
Proteins are kind of natural molecules that show unique
functionalities and properties in biological materials and
manufacturing feld. Tere are numerous nanomaterials
which are derived from protein, albumin, and gelatin. Tese
nanoparticles have promising properties like biodegradability, nonantigenicity, metabolizable, surface modifer, greater
stability during in vivo during storage, and being relatively
easy to prepare and monitor the size of the particles.
These particles have the ability to attach covalently with
drug and ligand
Riboflavin–vitamin b2 fermentation process
This document summarizes the industrial production process of riboflavin (Vitamin B2) through fermentation. It describes how the fungus Ashbya gossypii is used in a batch fermentation process to produce around 1000 tons of riboflavin per year. The upstream process involves preparation and sterilization of growth media. Fermentation is followed by downstream processing including harvesting, crystallization, centrifugation and drying to obtain a purified riboflavin powder or granules with 70% purity. Key materials used include glucose, oils and nutrient extracts to feed the fungus, with the major products being riboflavin, biomass and carbon dioxide.
Lecture 3 bioprocess control
This document discusses bioprocess control for cell cultivation systems. It covers various parameters that are measured for control, including cell inputs and outputs, substrate levels, oxygen, carbon dioxide, temperature, pH, dissolved oxygen, and foam. Sensors used for online measurement of these parameters in bioreactors are also outlined. The document then describes basic feedback loops and controllers for bioprocess control, including PID and model predictive control. It concludes with an overview of using a supervisory control and data acquisition (SCADA) system connected over Ethernet for monitoring and controlling bioreactor systems.
Recommended
Biotechnology:Bioprocess development and technology
Bioprocess development and technology-Introduction,History of bioprocess,Milestones of Bioprocess development,Bioprocess development,Impact on Biotechnology
Scale up process or Bioreactor scale up or Upstream process
what is scale up ?
Lab scale, Pilot scale, Industrial scale
Bioreactor scale up process
Upstream process
Packed bed reactor
This presentation gives all the required information about pack bed bioreactor, including, advantages, disadvantages, applications and even how to overcome the disadvantages. Packed bed bioreactor is the major type of bioreactor used in waste water treatment as it involves the usage of catalyst. There are different types of packed bed bioreactors and they are used according to the desired product. There is picture representation and also tabular form of differentiation.
I have also mentioned the references at the end.
Bioprocess engineering pressure measurement and control
This document discusses pressure measurement and control in bioreactors. It describes two common pressure sensors - the Bourdon tube and diaphragm-type. The Bourdon tube uses a curved tube that straightens with increasing pressure to move a pinion and pointer. The diaphragm measures low pressures by flexing a diaphragm and levering a pointer. Pressure must be controlled to maintain sterility and gas solubility. Pressure reduction and retention valves are used to regulate pressure between sections.
Aqueous two phase extraction
The document discusses aqueous two-phase extraction (ATP), a separation method used in downstream protein processing. ATP uses the partitioning of proteins between two immiscible aqueous phases formed by mixing polymers like PEG and dextran, or polymers and salts. Several factors affect partitioning, including biomolecule properties, polymer/salt concentrations, pH, and temperature. ATP has advantages over organic solvent extraction as it is milder and lowers interfacial stress on proteins. The document outlines applications of ATP in purifying pharmaceutical proteins, antibodies, enzymes, antibiotics, amino acids, and other compounds. It also summarizes a research paper on using ATP to purify lipase from rice bran.
Protein based nanostructures for biomedical applications
Proteins are kind of natural molecules that show unique
functionalities and properties in biological materials and
manufacturing feld. Tere are numerous nanomaterials
which are derived from protein, albumin, and gelatin. Tese
nanoparticles have promising properties like biodegradability, nonantigenicity, metabolizable, surface modifer, greater
stability during in vivo during storage, and being relatively
easy to prepare and monitor the size of the particles.
These particles have the ability to attach covalently with
drug and ligand
Riboflavin–vitamin b2 fermentation process
This document summarizes the industrial production process of riboflavin (Vitamin B2) through fermentation. It describes how the fungus Ashbya gossypii is used in a batch fermentation process to produce around 1000 tons of riboflavin per year. The upstream process involves preparation and sterilization of growth media. Fermentation is followed by downstream processing including harvesting, crystallization, centrifugation and drying to obtain a purified riboflavin powder or granules with 70% purity. Key materials used include glucose, oils and nutrient extracts to feed the fungus, with the major products being riboflavin, biomass and carbon dioxide.
Lecture 3 bioprocess control
This document discusses bioprocess control for cell cultivation systems. It covers various parameters that are measured for control, including cell inputs and outputs, substrate levels, oxygen, carbon dioxide, temperature, pH, dissolved oxygen, and foam. Sensors used for online measurement of these parameters in bioreactors are also outlined. The document then describes basic feedback loops and controllers for bioprocess control, including PID and model predictive control. It concludes with an overview of using a supervisory control and data acquisition (SCADA) system connected over Ethernet for monitoring and controlling bioreactor systems.
Bioprocess (1)
This document discusses factors that affect fermentation broth viscosity and mixing in bioreactors. It describes how cell concentration, morphology, and extracellular polymers influence broth rheology. Common mixing equipment like stirred tanks and various impeller designs are also outlined. Finally, the document explains the three main flow regimes - laminar, turbulent, and transitional - that can occur in bioreactors based on the impeller type and Reynolds number.
Fluidised Bed Bioreactor
A fluidized bed reactor (FBR) is a type of reactor device that can be used to carry out a variety of multiphase chemical reactions.
In this type of reactor, a fluid (gas or liquid) is passed through a solid granular material (usually a catalyst possibly shaped as tiny spheres) at high enough velocities to suspend the solid and cause it to behave as though it were a fluid.
This process, known as fluidization, imparts many important advantages to the FBR.
As a result, the fluidized bed reactor is now used in many industrial applications
Growth kinetics
Microbial Kinetics in Batch Culture
Culture system containing a limited amount of nutrient, which is inoculated with the microorganism. Cells grow until some component is exhausted or until the environment changes so as to inhibit growth. Biomass concentration defined in terms of cell dry weight measurements (g/l) or total cell number (cells/ml).
Lineweaver-Burke Equation.....We remember the Monod Equation
Invert…
The equation now has the form of a straight line with intercept.
Y = MX + C
By plotting as a function of
You get a straight line, where the slope is , and the y–axis intercept is .
Product Yield Coefficient
Maintenance:
Cells use energy and raw materials for two functions, production of new cells and the maintenance of existing cells. In general, consumption of materials for maintenance is small w.r.t. the amount of materials used in the synthesis of new biomass.
Generally it is assumed that the use of materials for maintenance is proportional to the amount of cells present.
Bubble column reactor
This presentation provides an overview of bubble column reactors. It begins with an introduction that defines a bubble column reactor as a cylindrical vessel with a gas distributor at the bottom used for multiphase contact and reactions. The presentation then covers the theory of bubble column operation, design equations for parameters like superficial gas velocity and gas holdup, applications in chemical processes, and advantages like good heat and mass transfer with low costs and no moving parts.
Bioreactor control system
This document discusses bioreactor control systems. It describes different types of control systems including manual control, automatic control, two-position controllers, proportional control, integral control, and derivative control. It explains that automatic control systems use four basic components: a measuring element, controller, final control element, and the process to be controlled. The document also summarizes different combinations of control methods, such as proportional plus integral control and proportional plus integral plus derivative control.
Enzyme biosensor final
This document provides an overview of enzyme-based biosensors. It discusses the history and components of biosensors, including the biological recognition element and transducer. Common types of biosensors are described based on their method of detection such as calorimetric, optical, and potentiometric. Examples like glucose meters and pregnancy tests are explained. Glucose meters work by measuring the hydrogen peroxide produced from the reaction of glucose and glucose oxidase using an electrode. Overall, the document provides a high-level introduction to the principles, components, applications and examples of enzyme-based biosensors.
Batch and Continuous Sterilization of Media in Fermentation Industry
Continuous sterilization is the rapid transfer of heat to medium through steam condensate without the use of a heat exchanger. ... This is more efficient than batch sterilization because instead of expending energy to heat, hold, and cool the entire system, small portions of the inlet streams are heated at a time.
genetically modified organisms in the field of bio-remediation
genetically modified organisms used for remediation of heavy metals, radioactive waste for bio-remediation
Media formulation
This document discusses the key components required for microbial growth and fermentation, including carbon, nitrogen, minerals, vitamins and oxygen. It outlines the goals of optimizing fermentation media to maximize product yield while minimizing undesirable byproducts. Finally, it examines various carbon sources, nitrogen sources, minerals, trace elements and antifoaming agents used in fermentation media formulation.
Enzyme based Biosensors
Biosensors are the analytical device that are used to measure the concentration of analye , these type of biosensors are made with conjugation of enzymes as a biological eliment to quantify a (bio)chemical substance / analyte are reffered to as Enzyme-probe Biosensors .
Biosensors are of many types but focusing on Enzyme biosensors there are 4 main types which are briefly described in this power point presentation .
“Microbial Biomass” A Renewable Energy For The Future
This document discusses microbial biomass as a renewable energy source for the future. It defines microbial biomass as the total organic matter present in microorganisms, which can decompose plant and animal residues. Microbial biomass includes bacterial, fungal, and algal biomass, and can be used to produce biofuels through microbial fuel cells, biodiesel production, and biogas production. While microbial biofuels have advantages like being renewable and causing less environmental impact than fossil fuels, they also have disadvantages including higher costs and needing specialized equipment and skilled personnel. The document concludes that microbial biomass can serve as an alternative to depleting fossil fuel reserves.
Biological methods for nanoparticle synthesis
This presentation is intended to give brief review about the biological systems widely used in research for nanoparticles synthesis
Power Requirements for Mixing in Bioreactor
You can learn about how the Power Requirement for Mixing in bioreactor .they were Gased fluid, ungased fluid , Rheological properties.
Immobilized enzymes reactors
Enzyme immobilization involves confining enzyme molecules to a solid support to convert substrates to products. Common techniques include carrier binding through physical adsorption, covalent bonding or ionic bonding, as well as cross-linking and entrapment. Bioreactors use immobilized enzymes for chemical transformations and come in batch, fed-batch and continuous formats like CSTR and PFR reactors. Continuous reactors have advantages over batch reactors for product formation control and process automation.
Batch, Fed-Batch, Continuous Cultivation
Batch, Fed-Batch, Continuous Cultivation, Growth Kinetics, Substation Utilisation, Product Formation, Luedeking Piret Model, Effect of pH, Effect of Temperature, Dissolved Oxygen Concentration
Modes of fermentation
This document discusses three main modes of fermentation: batch, continuous, and fed-batch fermentation. Batch fermentation uses a closed system where fresh media is not added and waste is not removed, resulting in changing nutrient and waste concentrations over time. Continuous fermentation uses an open system where fresh media and waste removal occur continuously, maintaining steady-state log phase growth. Fed-batch fermentation uses a semi-closed system where fresh media is added periodically without waste removal, allowing nutrient concentrations to be controlled while volume increases over time.
Scale-up and scale-down of chemical processes
Explains the path from for example synthesizing a useful appearing material in the lab to actual production of the same. Also explains what pilot machines are, how they are used, and why sometimes down-scaling of a unit operation is done to experiment in bench-scale.
Trickle bed reactor
A trickle-bed reactor uses the downward movement of a liquid and upward or downward movement of gas over a packed bed of catalyst particles to facilitate catalytic reactions. There are three basic types - conventional trickle beds with randomly packed catalyst, semi-structured beds with structured or monolithic catalyst, and micro-trickle beds with catalyst in microchannels. In operation, the liquid trickles down while the gas flows concurrently up or down, with various flow regimes depending on flow rates and properties. Examples of uses include liquid-phase hydrogenation in refineries, oxidation of compounds in wastewater, and wastewater treatment using biofilm on the packed bed surface.
unstructured growth kinetics
This document discusses cellular engineering and modeling of cell growth kinetics, including:
- Cell metabolism involves hundreds of enzyme-catalyzed reactions, and growth can be modeled based on limiting substrates.
- The Monod model relates specific growth rate to limiting substrate concentration.
- Continuous culture systems like chemostats operate at steady-state with dilution rate equal to specific growth rate.
- Critical dilution rate marks the point where cells are "washed out" of the system faster than they can grow.
immobilized cell reactor
This document discusses different methods for immobilizing whole cells, including perfusion bioreactors and biofilm formation. Perfusion bioreactors culture cells continuously over long periods by feeding fresh media and removing waste, while various separation methods like hollow fiber membranes or centrifuges keep cells in the bioreactor. Perfusion offers advantages like improved product quality, smaller reactor size, and lower costs compared to traditional fed-batch systems. The document also covers immobilizing cells through entrapment in polymers, attachment to surfaces, or passive biofilm formation on supports.
Technical seminar presentation on Bio-inspired materials for Directional flui...
Technical seminar presentation on the topic "Bio inspired materials for directional fluid transport and manufacturing stealth fabric".
Use the references to learn more about the topic.......
Best of luck!!!!!!!
Atomic absorption spectroscopy
Atomic absorption spectroscopy is a quantitative analytical technique used to determine concentrations of metals and some non-metals in solutions. It works by vaporizing the sample into atoms and measuring how much light of a specific wavelength is absorbed. The amount of absorption is directly proportional to the concentration of the analyte. Sample preparation techniques like dilution, decomposition, and calibration curves are used to prepare samples for introduction into the flame or graphite furnace atomizers. Common instrumentation includes hollow cathode lamps, nebulizers, and monochromators. Interferences can occur from chemical species, ionization, and matrix effects. Applications include analysis of metals in biological tissues, alloys, foods, and more.
More Related Content
What's hot
Bioprocess (1)
This document discusses factors that affect fermentation broth viscosity and mixing in bioreactors. It describes how cell concentration, morphology, and extracellular polymers influence broth rheology. Common mixing equipment like stirred tanks and various impeller designs are also outlined. Finally, the document explains the three main flow regimes - laminar, turbulent, and transitional - that can occur in bioreactors based on the impeller type and Reynolds number.
Fluidised Bed Bioreactor
A fluidized bed reactor (FBR) is a type of reactor device that can be used to carry out a variety of multiphase chemical reactions.
In this type of reactor, a fluid (gas or liquid) is passed through a solid granular material (usually a catalyst possibly shaped as tiny spheres) at high enough velocities to suspend the solid and cause it to behave as though it were a fluid.
This process, known as fluidization, imparts many important advantages to the FBR.
As a result, the fluidized bed reactor is now used in many industrial applications
Growth kinetics
Microbial Kinetics in Batch Culture
Culture system containing a limited amount of nutrient, which is inoculated with the microorganism. Cells grow until some component is exhausted or until the environment changes so as to inhibit growth. Biomass concentration defined in terms of cell dry weight measurements (g/l) or total cell number (cells/ml).
Lineweaver-Burke Equation.....We remember the Monod Equation
Invert…
The equation now has the form of a straight line with intercept.
Y = MX + C
By plotting as a function of
You get a straight line, where the slope is , and the y–axis intercept is .
Product Yield Coefficient
Maintenance:
Cells use energy and raw materials for two functions, production of new cells and the maintenance of existing cells. In general, consumption of materials for maintenance is small w.r.t. the amount of materials used in the synthesis of new biomass.
Generally it is assumed that the use of materials for maintenance is proportional to the amount of cells present.
Bubble column reactor
This presentation provides an overview of bubble column reactors. It begins with an introduction that defines a bubble column reactor as a cylindrical vessel with a gas distributor at the bottom used for multiphase contact and reactions. The presentation then covers the theory of bubble column operation, design equations for parameters like superficial gas velocity and gas holdup, applications in chemical processes, and advantages like good heat and mass transfer with low costs and no moving parts.
Bioreactor control system
This document discusses bioreactor control systems. It describes different types of control systems including manual control, automatic control, two-position controllers, proportional control, integral control, and derivative control. It explains that automatic control systems use four basic components: a measuring element, controller, final control element, and the process to be controlled. The document also summarizes different combinations of control methods, such as proportional plus integral control and proportional plus integral plus derivative control.
Enzyme biosensor final
This document provides an overview of enzyme-based biosensors. It discusses the history and components of biosensors, including the biological recognition element and transducer. Common types of biosensors are described based on their method of detection such as calorimetric, optical, and potentiometric. Examples like glucose meters and pregnancy tests are explained. Glucose meters work by measuring the hydrogen peroxide produced from the reaction of glucose and glucose oxidase using an electrode. Overall, the document provides a high-level introduction to the principles, components, applications and examples of enzyme-based biosensors.
Batch and Continuous Sterilization of Media in Fermentation Industry
Continuous sterilization is the rapid transfer of heat to medium through steam condensate without the use of a heat exchanger. ... This is more efficient than batch sterilization because instead of expending energy to heat, hold, and cool the entire system, small portions of the inlet streams are heated at a time.
genetically modified organisms in the field of bio-remediation
genetically modified organisms used for remediation of heavy metals, radioactive waste for bio-remediation
Media formulation
This document discusses the key components required for microbial growth and fermentation, including carbon, nitrogen, minerals, vitamins and oxygen. It outlines the goals of optimizing fermentation media to maximize product yield while minimizing undesirable byproducts. Finally, it examines various carbon sources, nitrogen sources, minerals, trace elements and antifoaming agents used in fermentation media formulation.
Enzyme based Biosensors
Biosensors are the analytical device that are used to measure the concentration of analye , these type of biosensors are made with conjugation of enzymes as a biological eliment to quantify a (bio)chemical substance / analyte are reffered to as Enzyme-probe Biosensors .
Biosensors are of many types but focusing on Enzyme biosensors there are 4 main types which are briefly described in this power point presentation .
“Microbial Biomass” A Renewable Energy For The Future
This document discusses microbial biomass as a renewable energy source for the future. It defines microbial biomass as the total organic matter present in microorganisms, which can decompose plant and animal residues. Microbial biomass includes bacterial, fungal, and algal biomass, and can be used to produce biofuels through microbial fuel cells, biodiesel production, and biogas production. While microbial biofuels have advantages like being renewable and causing less environmental impact than fossil fuels, they also have disadvantages including higher costs and needing specialized equipment and skilled personnel. The document concludes that microbial biomass can serve as an alternative to depleting fossil fuel reserves.
Biological methods for nanoparticle synthesis
This presentation is intended to give brief review about the biological systems widely used in research for nanoparticles synthesis
Power Requirements for Mixing in Bioreactor
You can learn about how the Power Requirement for Mixing in bioreactor .they were Gased fluid, ungased fluid , Rheological properties.
Immobilized enzymes reactors
Enzyme immobilization involves confining enzyme molecules to a solid support to convert substrates to products. Common techniques include carrier binding through physical adsorption, covalent bonding or ionic bonding, as well as cross-linking and entrapment. Bioreactors use immobilized enzymes for chemical transformations and come in batch, fed-batch and continuous formats like CSTR and PFR reactors. Continuous reactors have advantages over batch reactors for product formation control and process automation.
Batch, Fed-Batch, Continuous Cultivation
Batch, Fed-Batch, Continuous Cultivation, Growth Kinetics, Substation Utilisation, Product Formation, Luedeking Piret Model, Effect of pH, Effect of Temperature, Dissolved Oxygen Concentration
Modes of fermentation
This document discusses three main modes of fermentation: batch, continuous, and fed-batch fermentation. Batch fermentation uses a closed system where fresh media is not added and waste is not removed, resulting in changing nutrient and waste concentrations over time. Continuous fermentation uses an open system where fresh media and waste removal occur continuously, maintaining steady-state log phase growth. Fed-batch fermentation uses a semi-closed system where fresh media is added periodically without waste removal, allowing nutrient concentrations to be controlled while volume increases over time.
Scale-up and scale-down of chemical processes
Explains the path from for example synthesizing a useful appearing material in the lab to actual production of the same. Also explains what pilot machines are, how they are used, and why sometimes down-scaling of a unit operation is done to experiment in bench-scale.
Trickle bed reactor
A trickle-bed reactor uses the downward movement of a liquid and upward or downward movement of gas over a packed bed of catalyst particles to facilitate catalytic reactions. There are three basic types - conventional trickle beds with randomly packed catalyst, semi-structured beds with structured or monolithic catalyst, and micro-trickle beds with catalyst in microchannels. In operation, the liquid trickles down while the gas flows concurrently up or down, with various flow regimes depending on flow rates and properties. Examples of uses include liquid-phase hydrogenation in refineries, oxidation of compounds in wastewater, and wastewater treatment using biofilm on the packed bed surface.
unstructured growth kinetics
This document discusses cellular engineering and modeling of cell growth kinetics, including:
- Cell metabolism involves hundreds of enzyme-catalyzed reactions, and growth can be modeled based on limiting substrates.
- The Monod model relates specific growth rate to limiting substrate concentration.
- Continuous culture systems like chemostats operate at steady-state with dilution rate equal to specific growth rate.
- Critical dilution rate marks the point where cells are "washed out" of the system faster than they can grow.
immobilized cell reactor
This document discusses different methods for immobilizing whole cells, including perfusion bioreactors and biofilm formation. Perfusion bioreactors culture cells continuously over long periods by feeding fresh media and removing waste, while various separation methods like hollow fiber membranes or centrifuges keep cells in the bioreactor. Perfusion offers advantages like improved product quality, smaller reactor size, and lower costs compared to traditional fed-batch systems. The document also covers immobilizing cells through entrapment in polymers, attachment to surfaces, or passive biofilm formation on supports.
What's hot (20)
Batch and Continuous Sterilization of Media in Fermentation Industry
Batch and Continuous Sterilization of Media in Fermentation Industry
genetically modified organisms in the field of bio-remediation
genetically modified organisms in the field of bio-remediation
“Microbial Biomass” A Renewable Energy For The Future
“Microbial Biomass” A Renewable Energy For The Future
More from Manikandan R
Technical seminar presentation on Bio-inspired materials for Directional flui...
Technical seminar presentation on the topic "Bio inspired materials for directional fluid transport and manufacturing stealth fabric".
Use the references to learn more about the topic.......
Best of luck!!!!!!!
Atomic absorption spectroscopy
Atomic absorption spectroscopy is a quantitative analytical technique used to determine concentrations of metals and some non-metals in solutions. It works by vaporizing the sample into atoms and measuring how much light of a specific wavelength is absorbed. The amount of absorption is directly proportional to the concentration of the analyte. Sample preparation techniques like dilution, decomposition, and calibration curves are used to prepare samples for introduction into the flame or graphite furnace atomizers. Common instrumentation includes hollow cathode lamps, nebulizers, and monochromators. Interferences can occur from chemical species, ionization, and matrix effects. Applications include analysis of metals in biological tissues, alloys, foods, and more.
Effluent treatment schematics for Dairy industries
This document discusses dairy processing and wastewater generation. It provides a flow chart of dairy processing activities and sources of wastewater from various units including receiving, storage, clarification, pasteurization, homogenization, and packing. Characteristics of the wastewater are provided such as pH, BOD, COD, nitrogen, phosphorus, and coliform bacteria levels. Options for treating dairy effluent through biogas generation are explored, including flow diagrams of treatment and biological treatment systems used.
Bioleaching
This document summarizes bioleaching, which uses microorganisms to extract metals from minerals and ores. It discusses the history of bioleaching and microorganisms used, including Thiobacillus ferrooxidans and Leptospirillum ferrooxidans. Direct bacterial leaching involves dissolution of the metal directly by bacterial activity, while indirect leaching uses bacteria to generate acidity or solubilize the metal. Examples of direct and indirect leaching include uranium extraction. Commercial bioprocesses include heap, in situ, and copper leaching. Key factors that affect bioleaching are temperature, pH, microbial diversity, population density, and physicochemical conditions.
Effluent treatment schematics for electroplating industries
This document is a self-study report submitted by Manikandan.R for an industrial wastewater treatment course. It discusses the historical development of wastewater treatment, techniques like coagulation and precipitation, and provides details on the typical 6-stage process for treating electroplating wastewater, including precipitation, flash mixing, flocculation, clarification, sludge handling, and dewatering. It concludes with references.
Enzymes
This document is a self-study submission for a Biochemical Engineering course by a student named Manikandan.R. It discusses enzymes, including their structure, inhibitors, activators, substrates, and products. It also covers the applications of enzymes and examples of their uses. References are provided at the end.
More from Manikandan R (6)
Technical seminar presentation on Bio-inspired materials for Directional flui...
Technical seminar presentation on Bio-inspired materials for Directional flui...
Effluent treatment schematics for Dairy industries
Effluent treatment schematics for Dairy industries
Effluent treatment schematics for electroplating industries
Effluent treatment schematics for electroplating industries
Recently uploaded
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Recently uploaded (20)
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Heat generation in aerobic culture
- 1. Submitted for self study evaluation for the course “Biochemical engineering” Fifth Semester, Chemical Engineering - 2016 Submitted by : Name : Sirajudheen K V USN : 1RV13CH032
- 4.
- 5.
- 11. A TYPICAL STUDY TO UNDERSTAND HEAT PRODUCTION BY RUMINAL BACTERIA IN CONTINUOUS CULTURE AND ITS RELATIONSHIP TO MAINTENANCE ENERGY.
- 12.
- 13.
- 14. REFERENCES J Bacteriol J B Russell