Why SU-POR?
SU-POR Surgical Implants are manufactured from a linear high-density polyethylene. SU-POR Surgical
Implants allow for tissue ingrowth because of the interconnecting open pore structure. The firm nature of
the material allows carving with a sharp instrument without collapsing the pore structure. SU-POR Surgical
Implants, available in blocks, sheets and preformed anatomical shapes are intended for non-weight bearing
applications of craniofacial reconstruction/cosmetic surgery and repair of craniofacial trauma. SU-POR
Surgical Implants are also intended for augmentation and restoration of contour in the craniomaxillofacial
skeleton
The porosity of SU-POR Surgical Implants is maintained large, with average pore sizes greater than 100
microns and pore volume in the 50% range (measured by Mercury Intrusion Porosimetry). Clinical experience
and animal studies have shown that tissue will grow into the open pores of porous polyethylene. The
clinical significance of tissue ingrowth may vary with the application and implant site. Invitro and invivo
biocompatibility studies have shown SU-POR Surgical Implants to be free from any observable systemic or
cytotoxic effects.
The success of any implant is dependent upon careful handling and proper surgical technique. Porous
materials are particularly susceptible to contamination either by micro-organisms or foreign material. In order
to reduce the chance of contamination during preoperative handling, the highest level of aseptic care must
be used. SU-POR Surgical Implants should remain in the protective pouch until the implant site has been
prepared.
Select from an array of anatomical shapes, sheets, blocks, and spheres including:
o Preformed shapes for chin, malar, rim, midface and mandibular augmentation
o Reconstructive shapes for traumatic defects
o Sheets, wedges and blocks for orbital floor and wall repair
o Spheres and Conical Orbital Implants for enucleation and evisceration procedures
The intent of this brochure is to provide the surgeon with illustrations and dimensions of the many shapes of SU-POR
Surgical Implants. Implants can be customized to accommodate the individual need of the patient.
Surgeons should utilize proper surgical techniques for which they were trained and their clinical experience to determine
appropriate surgical procedures. Successful implantations are technique sensitive. Sound surgical judgment should be
used in the selection/shaping and implantation of SU-POR Surgical Implants.
Illuminating the darkness blacks and north africans in islam by habeeb akandedocsforu
ILLUMINATING THE DARKNESS is about the status of blacks and North
Africans in Islam. The book is divided into two sections: Part I of the book
explores the concept of race, ‘blackness’, slavery, interracial marriage
and racism in Islam in the light of the Qur’an, Hadith and early historical
sources. Part II of the book consists of a compilation of short biographies
of noble black and North African Muslim men and women in Islamic
history including Prophets, Companions of the Prophet $ and more recent
historical figures. The reader is given a fascinating glimpse into the lives of
truly noble characters, from luminous scholars to leaders of whole African
civilisations.
The reader needs no other discrimination while reading this book than
the one the author strives to make clear throughout: the din of Islam is not
only free of racism but is utterly opposed to it as the most aberrant form
of jahiliyyah (ignorance).
HABEEB AKANDE Born in London, England, Habeeb Akande graduated
from Kingston University with a First Class BA with Honours degree in
Business and Film Studies. After his graduation, Habeeb travelled to Cairo,
Egypt in pursuit of studying traditional Islamic sciences. A student of the
Maliki school of Jurisprudence, Habeeb studied Arabic, Islamic Law and
Islamic History at al-Azhar High School and University.
Illuminating the darkness blacks and north africans in islam by habeeb akandedocsforu
ILLUMINATING THE DARKNESS is about the status of blacks and North
Africans in Islam. The book is divided into two sections: Part I of the book
explores the concept of race, ‘blackness’, slavery, interracial marriage
and racism in Islam in the light of the Qur’an, Hadith and early historical
sources. Part II of the book consists of a compilation of short biographies
of noble black and North African Muslim men and women in Islamic
history including Prophets, Companions of the Prophet $ and more recent
historical figures. The reader is given a fascinating glimpse into the lives of
truly noble characters, from luminous scholars to leaders of whole African
civilisations.
The reader needs no other discrimination while reading this book than
the one the author strives to make clear throughout: the din of Islam is not
only free of racism but is utterly opposed to it as the most aberrant form
of jahiliyyah (ignorance).
HABEEB AKANDE Born in London, England, Habeeb Akande graduated
from Kingston University with a First Class BA with Honours degree in
Business and Film Studies. After his graduation, Habeeb travelled to Cairo,
Egypt in pursuit of studying traditional Islamic sciences. A student of the
Maliki school of Jurisprudence, Habeeb studied Arabic, Islamic Law and
Islamic History at al-Azhar High School and University.
Vitreous (Attachments, age changes, vitreous hemorrhage, Vitreous Detachment)Maryam Fida
Vitreous
Vitreous is an inert, avascular, transparent, jelly like structure.
Serve as one of refractive media of the eye and has optical functions.
It gives structural integrity to eye and provide nutrients to the lens, ciliary body and retina.
Constitute 80% volume of the eye.
Contain collagen fibrils, mucopoly-saccharides and hyaluronic acid.
It’s a hydrophilic gel which become ‘’fluid’’ when protein coagulates.
Reasons for coagulation of proteins could be,
• Advancing senile age
• Degenerations, e.g. as in high myopia
• Chemical and mechanical trauma
Internal limiting membrane on inner surface of retina separate it from vitreous. There is potential space ‘subhyaloid space’ between two.
Figure 1 structures of vitreous
Vitreous attachments
1. Anteriorly to the lens and ciliary epithelium in front of ora serrata. Part of vitreous about 4mm across ora serrata is called as ‘base of vitreous’. Here, attachment is strongest.
2. Posteriorly to the edge of optic disc and macula lutea (foveal region) forming ring shaped structure around them.
Figure 2 vitreous attachments
Age changes in Vitreous
Vitreous undergo certain physical and biochemical changes with aging.
1. At birth_ the Cloquet’s canal runs straight from lens to optic disc. It contains primary vitreous.
2. In young persons_ vitreous gel is homogenous but its fibers become coarse with process of advancing age.
3. In old age and high myopes_ secondary vitreous liquified (syneresis) and shrinks, producing a vitreous detachment, vitreous and retinal hemorrhage and retinal break.
Figure 3 Vitreous at birth Figure 4 Vitreous in young adults.
Figure 5 vitreous detachment in old age
Vitreous Hemorrhage
Vitreous hemorrhage is the extravasation, or leakage, of blood into the areas in and around the vitreous humor of the eye.
TYPES
There are two types of vitreous hemorrhage.
1. Peripheral or subhyaloid hemorrhage _ occurs between retina and vitreous.
Blood remains fluid, red in color
Blood moves with gravity forming boat-shaped figure in macular area.
Figure 3 subhyaloid hemorrhage
2. Intravitreal hemorrhage_ the hemorrhage may get absorbed or degenerate to form a white fibrous tissue mass.
Etiology
Common causes of vitreous hemorrhage are;
i. Trauma_ by contusion or penetrating injury
ii. Vitreous retraction_ vitreous fibrous bands or membrane retraction
iii. Eale’s disease_ due to retinal vasculitis and periphlebitis
iv. Blood dyscrasias_ leukemia, sickle cell anemia, purpura.
v. Diabetes mellitus_ common in diabetic proliferative retinopathy
vi. Central retinal vein thrombosis
vii. Malignant hypertension_ often results in large intravitreal hemorrhage.
Symptoms
I. Black spots or clouds maybe seen in front of eye.
II. Impaired vision maybe up to perception of light.
Signs
1. Fundus examination
a) Faint or no red reflex seen
b) Grey opacities maybe present in vitreous
Figure 4 (A) Fundus exami
Presentation file on "Investment Opportunities in Auto Sector in Thailand" by Mr. Chokedee Kaewsang, Deputy Secretary General, Thailand Board of Investment, April 2, 2015 at Sheraton Centre Toronto Hotel, Toronto, ON, Canada
A Report on Skullcandy
Skullcandy develops and distributes headphones and other audio accessories to retailers throughout the United States and to retailers and distributors in various countries worldwide.
Skullcandy is the leading global lifestyle and performance audio brand driven by the creativity and irreverence of youth culture. Skullcandy designs, markets and distributes audio and gaming headphones and other related products under the Skullcandy, Astro Gaming and 2XL by Skullcandy brands.
Vitreous (Attachments, age changes, vitreous hemorrhage, Vitreous Detachment)Maryam Fida
Vitreous
Vitreous is an inert, avascular, transparent, jelly like structure.
Serve as one of refractive media of the eye and has optical functions.
It gives structural integrity to eye and provide nutrients to the lens, ciliary body and retina.
Constitute 80% volume of the eye.
Contain collagen fibrils, mucopoly-saccharides and hyaluronic acid.
It’s a hydrophilic gel which become ‘’fluid’’ when protein coagulates.
Reasons for coagulation of proteins could be,
• Advancing senile age
• Degenerations, e.g. as in high myopia
• Chemical and mechanical trauma
Internal limiting membrane on inner surface of retina separate it from vitreous. There is potential space ‘subhyaloid space’ between two.
Figure 1 structures of vitreous
Vitreous attachments
1. Anteriorly to the lens and ciliary epithelium in front of ora serrata. Part of vitreous about 4mm across ora serrata is called as ‘base of vitreous’. Here, attachment is strongest.
2. Posteriorly to the edge of optic disc and macula lutea (foveal region) forming ring shaped structure around them.
Figure 2 vitreous attachments
Age changes in Vitreous
Vitreous undergo certain physical and biochemical changes with aging.
1. At birth_ the Cloquet’s canal runs straight from lens to optic disc. It contains primary vitreous.
2. In young persons_ vitreous gel is homogenous but its fibers become coarse with process of advancing age.
3. In old age and high myopes_ secondary vitreous liquified (syneresis) and shrinks, producing a vitreous detachment, vitreous and retinal hemorrhage and retinal break.
Figure 3 Vitreous at birth Figure 4 Vitreous in young adults.
Figure 5 vitreous detachment in old age
Vitreous Hemorrhage
Vitreous hemorrhage is the extravasation, or leakage, of blood into the areas in and around the vitreous humor of the eye.
TYPES
There are two types of vitreous hemorrhage.
1. Peripheral or subhyaloid hemorrhage _ occurs between retina and vitreous.
Blood remains fluid, red in color
Blood moves with gravity forming boat-shaped figure in macular area.
Figure 3 subhyaloid hemorrhage
2. Intravitreal hemorrhage_ the hemorrhage may get absorbed or degenerate to form a white fibrous tissue mass.
Etiology
Common causes of vitreous hemorrhage are;
i. Trauma_ by contusion or penetrating injury
ii. Vitreous retraction_ vitreous fibrous bands or membrane retraction
iii. Eale’s disease_ due to retinal vasculitis and periphlebitis
iv. Blood dyscrasias_ leukemia, sickle cell anemia, purpura.
v. Diabetes mellitus_ common in diabetic proliferative retinopathy
vi. Central retinal vein thrombosis
vii. Malignant hypertension_ often results in large intravitreal hemorrhage.
Symptoms
I. Black spots or clouds maybe seen in front of eye.
II. Impaired vision maybe up to perception of light.
Signs
1. Fundus examination
a) Faint or no red reflex seen
b) Grey opacities maybe present in vitreous
Figure 4 (A) Fundus exami
Presentation file on "Investment Opportunities in Auto Sector in Thailand" by Mr. Chokedee Kaewsang, Deputy Secretary General, Thailand Board of Investment, April 2, 2015 at Sheraton Centre Toronto Hotel, Toronto, ON, Canada
A Report on Skullcandy
Skullcandy develops and distributes headphones and other audio accessories to retailers throughout the United States and to retailers and distributors in various countries worldwide.
Skullcandy is the leading global lifestyle and performance audio brand driven by the creativity and irreverence of youth culture. Skullcandy designs, markets and distributes audio and gaming headphones and other related products under the Skullcandy, Astro Gaming and 2XL by Skullcandy brands.
A must read seminar on Dental Implants for Under-Graduates and Post-Graduates.
If you have any doubts regarding Dental Implants or any topic if you are unable to understand then do feel free to contact me on my Email address: Dr.anujparihar@gmail.com
Every patient has special needs and requirements, which have to be considered when determining the appropriate treatment.
Younger patients want esthetic closure of gaps to retain their young look as long as possible.
Older patients who are facing edentulousness still want to enjoy life and therefore prefer immediate fixed restorations, allowing them to continue participating in their social life and enjoy eating.
The quality of life of edentulous patients could be considerably increased with the help of a firmly fixed prosthesis, especially regarding the quality of their nutrition and the ability to make an untroubled appearance in public.
For us, implant prosthetics starts with the preservation of the hard and soft tissue.
By effectively fighting bacteria with the HELBO therapy, periodontally damaged teeth can frequently be preserved, and, if this is not possible, the foundation can be laid for
reliable early implant placement.
The socket shield technique at molar sitesNaveed AnJum
The socket-shield technique for avoiding postextraction tissue alteration was first described in 2010. The technique was developed for hopeless teeth in anterior esthetic sites but has not yet been described for molar sites. Managing postextractive ridge changes in the posterior region by prevention or regeneration remains a challenge. The socket shield aims to offset these ridge changes wherever possible, preserving the patient’s residual tissues at immediate implants.
Orbital blow out fracture repair /certified fixed orthodontic courses by Ind...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Orbital blow out fracture repair /certified fixed orthodontic courses by Ind...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
Indian Dental Academy: will be one of the most relevant and exciting training
center with best faculty and flexible training programs for dental
professionals who wish to advance in their dental practice,Offers certified
courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry,
Prosthetic Dentistry, Periodontics and General Dentistry.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Dental Implantology / /certified fixed orthodontic courses by Indian dental...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
00919248678078
HOT NEW PRODUCT! BIG SALES FAST SHIPPING NOW FROM CHINA!! EU KU DB BK substit...GL Anaacs
Contact us if you are interested:
Email / Skype : kefaya1771@gmail.com
Threema: PXHY5PDH
New BATCH Ku !!! MUCH IN DEMAND FAST SALE EVERY BATCH HAPPY GOOD EFFECT BIG BATCH !
Contact me on Threema or skype to start big business!!
Hot-sale products:
NEW HOT EUTYLONE WHITE CRYSTAL!!
5cl-adba precursor (semi finished )
5cl-adba raw materials
ADBB precursor (semi finished )
ADBB raw materials
APVP powder
5fadb/4f-adb
Jwh018 / Jwh210
Eutylone crystal
Protonitazene (hydrochloride) CAS: 119276-01-6
Flubrotizolam CAS: 57801-95-3
Metonitazene CAS: 14680-51-4
Payment terms: Western Union,MoneyGram,Bitcoin or USDT.
Deliver Time: Usually 7-15days
Shipping method: FedEx, TNT, DHL,UPS etc.Our deliveries are 100% safe, fast, reliable and discreet.
Samples will be sent for your evaluation!If you are interested in, please contact me, let's talk details.
We specializes in exporting high quality Research chemical, medical intermediate, Pharmaceutical chemicals and so on. Products are exported to USA, Canada, France, Korea, Japan,Russia, Southeast Asia and other countries.
Title: Sense of Smell
Presenter: Dr. Faiza, Assistant Professor of Physiology
Qualifications:
MBBS (Best Graduate, AIMC Lahore)
FCPS Physiology
ICMT, CHPE, DHPE (STMU)
MPH (GC University, Faisalabad)
MBA (Virtual University of Pakistan)
Learning Objectives:
Describe the primary categories of smells and the concept of odor blindness.
Explain the structure and location of the olfactory membrane and mucosa, including the types and roles of cells involved in olfaction.
Describe the pathway and mechanisms of olfactory signal transmission from the olfactory receptors to the brain.
Illustrate the biochemical cascade triggered by odorant binding to olfactory receptors, including the role of G-proteins and second messengers in generating an action potential.
Identify different types of olfactory disorders such as anosmia, hyposmia, hyperosmia, and dysosmia, including their potential causes.
Key Topics:
Olfactory Genes:
3% of the human genome accounts for olfactory genes.
400 genes for odorant receptors.
Olfactory Membrane:
Located in the superior part of the nasal cavity.
Medially: Folds downward along the superior septum.
Laterally: Folds over the superior turbinate and upper surface of the middle turbinate.
Total surface area: 5-10 square centimeters.
Olfactory Mucosa:
Olfactory Cells: Bipolar nerve cells derived from the CNS (100 million), with 4-25 olfactory cilia per cell.
Sustentacular Cells: Produce mucus and maintain ionic and molecular environment.
Basal Cells: Replace worn-out olfactory cells with an average lifespan of 1-2 months.
Bowman’s Gland: Secretes mucus.
Stimulation of Olfactory Cells:
Odorant dissolves in mucus and attaches to receptors on olfactory cilia.
Involves a cascade effect through G-proteins and second messengers, leading to depolarization and action potential generation in the olfactory nerve.
Quality of a Good Odorant:
Small (3-20 Carbon atoms), volatile, water-soluble, and lipid-soluble.
Facilitated by odorant-binding proteins in mucus.
Membrane Potential and Action Potential:
Resting membrane potential: -55mV.
Action potential frequency in the olfactory nerve increases with odorant strength.
Adaptation Towards the Sense of Smell:
Rapid adaptation within the first second, with further slow adaptation.
Psychological adaptation greater than receptor adaptation, involving feedback inhibition from the central nervous system.
Primary Sensations of Smell:
Camphoraceous, Musky, Floral, Pepperminty, Ethereal, Pungent, Putrid.
Odor Detection Threshold:
Examples: Hydrogen sulfide (0.0005 ppm), Methyl-mercaptan (0.002 ppm).
Some toxic substances are odorless at lethal concentrations.
Characteristics of Smell:
Odor blindness for single substances due to lack of appropriate receptor protein.
Behavioral and emotional influences of smell.
Transmission of Olfactory Signals:
From olfactory cells to glomeruli in the olfactory bulb, involving lateral inhibition.
Primitive, less old, and new olfactory systems with different path
Ozempic: Preoperative Management of Patients on GLP-1 Receptor Agonists Saeid Safari
Preoperative Management of Patients on GLP-1 Receptor Agonists like Ozempic and Semiglutide
ASA GUIDELINE
NYSORA Guideline
2 Case Reports of Gastric Ultrasound
Lung Cancer: Artificial Intelligence, Synergetics, Complex System Analysis, S...Oleg Kshivets
RESULTS: Overall life span (LS) was 2252.1±1742.5 days and cumulative 5-year survival (5YS) reached 73.2%, 10 years – 64.8%, 20 years – 42.5%. 513 LCP lived more than 5 years (LS=3124.6±1525.6 days), 148 LCP – more than 10 years (LS=5054.4±1504.1 days).199 LCP died because of LC (LS=562.7±374.5 days). 5YS of LCP after bi/lobectomies was significantly superior in comparison with LCP after pneumonectomies (78.1% vs.63.7%, P=0.00001 by log-rank test). AT significantly improved 5YS (66.3% vs. 34.8%) (P=0.00000 by log-rank test) only for LCP with N1-2. Cox modeling displayed that 5YS of LCP significantly depended on: phase transition (PT) early-invasive LC in terms of synergetics, PT N0—N12, cell ratio factors (ratio between cancer cells- CC and blood cells subpopulations), G1-3, histology, glucose, AT, blood cell circuit, prothrombin index, heparin tolerance, recalcification time (P=0.000-0.038). Neural networks, genetic algorithm selection and bootstrap simulation revealed relationships between 5YS and PT early-invasive LC (rank=1), PT N0—N12 (rank=2), thrombocytes/CC (3), erythrocytes/CC (4), eosinophils/CC (5), healthy cells/CC (6), lymphocytes/CC (7), segmented neutrophils/CC (8), stick neutrophils/CC (9), monocytes/CC (10); leucocytes/CC (11). Correct prediction of 5YS was 100% by neural networks computing (area under ROC curve=1.0; error=0.0).
CONCLUSIONS: 5YS of LCP after radical procedures significantly depended on: 1) PT early-invasive cancer; 2) PT N0--N12; 3) cell ratio factors; 4) blood cell circuit; 5) biochemical factors; 6) hemostasis system; 7) AT; 8) LC characteristics; 9) LC cell dynamics; 10) surgery type: lobectomy/pneumonectomy; 11) anthropometric data. Optimal diagnosis and treatment strategies for LC are: 1) screening and early detection of LC; 2) availability of experienced thoracic surgeons because of complexity of radical procedures; 3) aggressive en block surgery and adequate lymph node dissection for completeness; 4) precise prediction; 5) adjuvant chemoimmunoradiotherapy for LCP with unfavorable prognosis.
Report Back from SGO 2024: What’s the Latest in Cervical Cancer?bkling
Are you curious about what’s new in cervical cancer research or unsure what the findings mean? Join Dr. Emily Ko, a gynecologic oncologist at Penn Medicine, to learn about the latest updates from the Society of Gynecologic Oncology (SGO) 2024 Annual Meeting on Women’s Cancer. Dr. Ko will discuss what the research presented at the conference means for you and answer your questions about the new developments.
Tom Selleck Health: A Comprehensive Look at the Iconic Actor’s Wellness Journeygreendigital
Tom Selleck, an enduring figure in Hollywood. has captivated audiences for decades with his rugged charm, iconic moustache. and memorable roles in television and film. From his breakout role as Thomas Magnum in Magnum P.I. to his current portrayal of Frank Reagan in Blue Bloods. Selleck's career has spanned over 50 years. But beyond his professional achievements. fans have often been curious about Tom Selleck Health. especially as he has aged in the public eye.
Follow us on: Pinterest
Introduction
Many have been interested in Tom Selleck health. not only because of his enduring presence on screen but also because of the challenges. and lifestyle choices he has faced and made over the years. This article delves into the various aspects of Tom Selleck health. exploring his fitness regimen, diet, mental health. and the challenges he has encountered as he ages. We'll look at how he maintains his well-being. the health issues he has faced, and his approach to ageing .
Early Life and Career
Childhood and Athletic Beginnings
Tom Selleck was born on January 29, 1945, in Detroit, Michigan, and grew up in Sherman Oaks, California. From an early age, he was involved in sports, particularly basketball. which played a significant role in his physical development. His athletic pursuits continued into college. where he attended the University of Southern California (USC) on a basketball scholarship. This early involvement in sports laid a strong foundation for his physical health and disciplined lifestyle.
Transition to Acting
Selleck's transition from an athlete to an actor came with its physical demands. His first significant role in "Magnum P.I." required him to perform various stunts and maintain a fit appearance. This role, which he played from 1980 to 1988. necessitated a rigorous fitness routine to meet the show's demands. setting the stage for his long-term commitment to health and wellness.
Fitness Regimen
Workout Routine
Tom Selleck health and fitness regimen has evolved. adapting to his changing roles and age. During his "Magnum, P.I." days. Selleck's workouts were intense and focused on building and maintaining muscle mass. His routine included weightlifting, cardiovascular exercises. and specific training for the stunts he performed on the show.
Selleck adjusted his fitness routine as he aged to suit his body's needs. Today, his workouts focus on maintaining flexibility, strength, and cardiovascular health. He incorporates low-impact exercises such as swimming, walking, and light weightlifting. This balanced approach helps him stay fit without putting undue strain on his joints and muscles.
Importance of Flexibility and Mobility
In recent years, Selleck has emphasized the importance of flexibility and mobility in his fitness regimen. Understanding the natural decline in muscle mass and joint flexibility with age. he includes stretching and yoga in his routine. These practices help prevent injuries, improve posture, and maintain mobilit
Acute scrotum is a general term referring to an emergency condition affecting the contents or the wall of the scrotum.
There are a number of conditions that present acutely, predominantly with pain and/or swelling
A careful and detailed history and examination, and in some cases, investigations allow differentiation between these diagnoses. A prompt diagnosis is essential as the patient may require urgent surgical intervention
Testicular torsion refers to twisting of the spermatic cord, causing ischaemia of the testicle.
Testicular torsion results from inadequate fixation of the testis to the tunica vaginalis producing ischemia from reduced arterial inflow and venous outflow obstruction.
The prevalence of testicular torsion in adult patients hospitalized with acute scrotal pain is approximately 25 to 50 percent
263778731218 Abortion Clinic /Pills In Harare ,sisternakatoto
263778731218 Abortion Clinic /Pills In Harare ,ABORTION WOMEN’S CLINIC +27730423979 IN women clinic we believe that every woman should be able to make choices in her pregnancy. Our job is to provide compassionate care, safety,affordable and confidential services. That’s why we have won the trust from all generations of women all over the world. we use non surgical method(Abortion pills) to terminate…Dr.LISA +27730423979women Clinic is committed to providing the highest quality of obstetrical and gynecological care to women of all ages. Our dedicated staff aim to treat each patient and her health concerns with compassion and respect.Our dedicated group ABORTION WOMEN’S CLINIC +27730423979 IN women clinic we believe that every woman should be able to make choices in her pregnancy. Our job is to provide compassionate care, safety,affordable and confidential services. That’s why we have won the trust from all generations of women all over the world. we use non surgical method(Abortion pills) to terminate…Dr.LISA +27730423979women Clinic is committed to providing the highest quality of obstetrical and gynecological care to women of all ages. Our dedicated staff aim to treat each patient and her health concerns with compassion and respect.Our dedicated group of receptionists, nurses, and physicians have worked together as a teamof receptionists, nurses, and physicians have worked together as a team wwww.lisywomensclinic.co.za/
Pulmonary Thromboembolism - etilogy, types, medical- Surgical and nursing man...VarunMahajani
Disruption of blood supply to lung alveoli due to blockage of one or more pulmonary blood vessels is called as Pulmonary thromboembolism. In this presentation we will discuss its causes, types and its management in depth.
micro teaching on communication m.sc nursing.pdfAnurag Sharma
Microteaching is a unique model of practice teaching. It is a viable instrument for the. desired change in the teaching behavior or the behavior potential which, in specified types of real. classroom situations, tends to facilitate the achievement of specified types of objectives.
Couples presenting to the infertility clinic- Do they really have infertility...Sujoy Dasgupta
Dr Sujoy Dasgupta presented the study on "Couples presenting to the infertility clinic- Do they really have infertility? – The unexplored stories of non-consummation" in the 13th Congress of the Asia Pacific Initiative on Reproduction (ASPIRE 2024) at Manila on 24 May, 2024.
Knee anatomy and clinical tests 2024.pdfvimalpl1234
This includes all relevant anatomy and clinical tests compiled from standard textbooks, Campbell,netter etc..It is comprehensive and best suited for orthopaedicians and orthopaedic residents.
Recomendações da OMS sobre cuidados maternos e neonatais para uma experiência pós-natal positiva.
Em consonância com os ODS – Objetivos do Desenvolvimento Sustentável e a Estratégia Global para a Saúde das Mulheres, Crianças e Adolescentes, e aplicando uma abordagem baseada nos direitos humanos, os esforços de cuidados pós-natais devem expandir-se para além da cobertura e da simples sobrevivência, de modo a incluir cuidados de qualidade.
Estas diretrizes visam melhorar a qualidade dos cuidados pós-natais essenciais e de rotina prestados às mulheres e aos recém-nascidos, com o objetivo final de melhorar a saúde e o bem-estar materno e neonatal.
Uma “experiência pós-natal positiva” é um resultado importante para todas as mulheres que dão à luz e para os seus recém-nascidos, estabelecendo as bases para a melhoria da saúde e do bem-estar a curto e longo prazo. Uma experiência pós-natal positiva é definida como aquela em que as mulheres, pessoas que gestam, os recém-nascidos, os casais, os pais, os cuidadores e as famílias recebem informação consistente, garantia e apoio de profissionais de saúde motivados; e onde um sistema de saúde flexível e com recursos reconheça as necessidades das mulheres e dos bebês e respeite o seu contexto cultural.
Estas diretrizes consolidadas apresentam algumas recomendações novas e já bem fundamentadas sobre cuidados pós-natais de rotina para mulheres e neonatos que recebem cuidados no pós-parto em unidades de saúde ou na comunidade, independentemente dos recursos disponíveis.
É fornecido um conjunto abrangente de recomendações para cuidados durante o período puerperal, com ênfase nos cuidados essenciais que todas as mulheres e recém-nascidos devem receber, e com a devida atenção à qualidade dos cuidados; isto é, a entrega e a experiência do cuidado recebido. Estas diretrizes atualizam e ampliam as recomendações da OMS de 2014 sobre cuidados pós-natais da mãe e do recém-nascido e complementam as atuais diretrizes da OMS sobre a gestão de complicações pós-natais.
O estabelecimento da amamentação e o manejo das principais intercorrências é contemplada.
Recomendamos muito.
Vamos discutir essas recomendações no nosso curso de pós-graduação em Aleitamento no Instituto Ciclos.
Esta publicação só está disponível em inglês até o momento.
Prof. Marcus Renato de Carvalho
www.agostodourado.com
Novas diretrizes da OMS para os cuidados perinatais de mais qualidade
Poriferous Product Catalog 2018
1.
2. Why SU-POR?
SU-POR Surgical Implants are manufactured from a linear high-density polyethylene. SU-POR Surgical
Implants allow for tissue ingrowth because of the interconnecting open pore structure. The firm nature of
the material allows carving with a sharp instrument without collapsing the pore structure. SU-POR Surgical
Implants, available in blocks, sheets and preformed anatomical shapes are intended for non-weight bearing
applications of craniofacial reconstruction/cosmetic surgery and repair of craniofacial trauma. SU-POR
Surgical Implants are also intended for augmentation and restoration of contour in the craniomaxillofacial
skeleton
The porosity of SU-POR Surgical Implants is maintained large, with average pore sizes greater than 100
microns and pore volume in the 50% range (measured by Mercury Intrusion Porosimetry). Clinical experience
and animal studies have shown that tissue will grow into the open pores of porous polyethylene. The
clinical significance of tissue ingrowth may vary with the application and implant site. Invitro and invivo
biocompatibility studies have shown SU-POR Surgical Implants to be free from any observable systemic or
cytotoxic effects.
The success of any implant is dependent upon careful handling and proper surgical technique. Porous
materials are particularly susceptible to contamination either by micro-organisms or foreign material. In order
to reduce the chance of contamination during preoperative handling, the highest level of aseptic care must
be used. SU-POR Surgical Implants should remain in the protective pouch until the implant site has been
prepared.
Select from an array of anatomical shapes, sheets, blocks, and spheres including:
o Preformed shapes for chin, malar, rim, midface and mandibular augmentation
o Reconstructive shapes for traumatic defects
o Sheets, wedges and blocks for orbital floor and wall repair
o Spheres and Conical Orbital Implants for enucleation and evisceration procedures
The intent of this brochure is to provide the surgeon with illustrations and dimensions of the many shapes of SU-POR
Surgical Implants. Implants can be customized to accommodate the individual need of the patient.
Surgeons should utilize proper surgical techniques for which they were trained and their clinical experience to determine
appropriate surgical procedures. Successful implantations are technique sensitive. Sound surgical judgment should be
used in the selection/shaping and implantation of SU-POR Surgical Implants.
3. Page 1
Implant Preparation
SU-POR Surgical Implants are sold sterile and should never be re-sterilized. Prior to handling the implant,
operating room personnel should put on a clean pair of powder free gloves. Keep the implant in its protective
packaging until time of implantation. Upon opening the inner pouch, the implant should be placed in a sterile
antibiotic solution of the surgeon’s preference. Strict adherence to the principles of aseptic technique should
be followed with these implants. Proper surgical procedures and techniques are necessarily the responsibility
of the medical professional.
Cutting
SU-POR Surgical Implants are readily cut with surgical instruments. The material may be carved using scalpel,
burr, or cut with scissors, care should be taken to smooth the edges of the implant where it transitions to
bone. Trim any poorly attached implant material from the edges. After carving and sculpting is complete,
wash the implant with sterile saline to remove any loose particles from its surface and edges.
Contouring & Molding
To help the shaping process, the implant can be submerged in a hot, sterile saline bath (82° - 100°C, 180°
- 212°F). Having been heated, the implant will be more flexible allowing for modification to the shape. If the
implant cools and becomes difficult to bend, it should be returned to the hot saline. Once the desired shape
is obtained, the implant should be held in that shape and allowed to cool. A cold, sterile bath can be used to
accelerate the cooling process. Repeat the above steps if further molding is required.
Implant Stabilization
Stabilization and fixing of the implant, if desired, can be accomplished by means of proper rigid fixation
techniques. For screw fixation, the screw will compress the implant to the bone and will allow the surgeon to
sink the screw head even with the surface of the implant. The surface of the implant can easily be penetrated
with a cutting needle, enabling the surgeon to suture it to tissues or muscle. Advantages of stabilizing the
implant are the ability to contour and finely modify the edges of the implant, in situ, after fixation.
Surgical Revisions
The porous nature of SU-POR Surgical Implants allows for soft tissue ingrowth and vascularization of the
implant. In patients that may require later surgical revision, the surgeon should be aware of this vascular and
soft tissue ingrowth. In the event revision or removal of the implant is required after ingrowth has occurred,
the surrounding soft tissue may be raised with a surgical instrument and the implant dissected out with a
scalpel or surgical scissors.
4. Page 2
Sheet
The SU-POR (biomaterial) Sheet provides surgeons with an excellent option for craniofacial reconstruction and
augmentation
Cat # A B C
4001 38mm 50mm 0.25mm
4002 50mm 76mm 0.25mm
4003 38mm 50mm 0.35mm
4004 50mm 76mm 0.35mm
4005 30mm 50mm 0.40mm
4006 38mm 50mm 0.45mm
4007 50mm 76mm 0.45mm
4008 38mm 50mm 0.85mm
4009 50mm 76mm 0.85mm
4012 38mm 50mm 1.5mm
4013 50mm 76mm 1.5mm
4015 38mm 50mm 3.0mm
Membrane Sheet
The SU-POR Membrane Sheet is designed to selectively prevent tissue attachment to one side of the implant surface. The
membrane layer is comprised of solid polyethylene and heat bonded to the porous layer without adhesives or additives.
Tissue integration occurs in the porous layer just as with the fully porous Sheet implant.
Cat # A B C
4231** 38mm 50mm 0.60mm
4016 38mm 50mm 1.0mm
4241 38mm 50mm 1.6mm
4017 50mm 76mm 1.0mm
4018 50mm 76mm 1.6mm
Flor-TecTM
Composite Orbital Floor** Designed with William R. Nunery, M.D., FACS
The Flor-Tec is a composite structure of SU-POR biomaterial comprised of a solid primary section and a leading porous
strip. Solid high-density polyethylene acts to prevent tissue ingrowth while the porous strip may help to facilitate implant
attachment.
Cat # A B C
4233 38mm 50mm 0.30mm
4232 38mm 50mm 0.40mm
4234 38mm 50mm 0.50mm
**Patent Pending Technology
A
B
C
A
B
C
A
B
C
5. Page 3
Microplate Single Channel Sheet
The Microplate Single Channel Sheet is designed for repair of significant orbital floor and wall trauma where the addition
of a rigid fixation plate provides structural support. The Microplate Single Channel Sheet accepts plates 1.0mm wide and
smaller.
Cat # A B C
4297* 38mm 50mm 0.85mm
Enophthalmos Wedge
The Enophthalmos Wedge is designed to mimic the shape of the orbital floor and designed to restore the shape of the
orbit.
Cat # Description A B C
4180 Regular - Left 24mm 33.5mm 7mm
4181 Regular - Right 24mm 33.5mm 7mm
4182 Large - Left 28mm 40mm 7.5mm
4183 Large - Right 28mm 40mm 7.5mm
Membrane Microplate Single Channel Sheet
The Membrane Microplate Single Channel Sheet is designed for repair of significant orbital floor and wall trauma where
the addition of a rigid fixation plate provides structural support. The Membrane Microplate Single Channel Sheet accepts
plates 1.0mm wide and smaller.
Cat # A B C
4296* 38mm 50mm 0.85mm
Miniplate Channel Sheet
The Miniplate Channel Sheet is designed for repair of significant orbital floor and wall trauma where the addition of a rigid
fixation plate provides structural support.
Cat # A B C
4298* 40mm 52mm 2.3mm
Microplate Channel Sheet
The Microplate Channel Sheet is designed for repair of significant orbital floor and wall trauma where the addition of a rigid
fixation plate provides structural support.
Cat # A B C
4299* 40mm 52mm 2.3mm
Membrane Miniplate Channel Sheet
The Membrane Miniplate Channel Sheet is designed for repair of significant orbital floor and wall trauma where the
addition of a rigid fixation plate provides structural support. The Membrane Layer acts to inhibit tissue ingrowth.
Membrane Microplate Channel Sheet
The Membrane Microplate Channel Sheet is designed for repair of significant orbital floor and wall trauma where the
addition of a rigid fixation plate provides structural support. The Membrane Layer acts to inhibit tissue ingrowth.
A
B
C
Cat # A B C
4300* 40mm 52mm 2.3mm
Cat # A B C
4301* 40mm 52mm 2.3mm
*Available Soon
6. Page 4
Sphere
The SU-POR Sphere provides surgeons with an excellent fully porous option for enucleation and evisceration procedures.
The Sphere is available in multiple sizes to ensure the best possible fit.
Cat # Diameter
4028 14mm
4029 16mm
4030 18mm
4031 19mm
4032 20mm
4033 21mm
4034 22mm
4035 23mm
Cor-TecTM
Sphere**
The Cor-Tec Sphere is an ocular implant with a thin porous layer surrounding a solid core. Full tissue integration is
achieved within the thin outer porous layer.
Cat # Diameter
4042 16mm
4043 18mm
4045 20mm
4047 22mm
Quadro-Port Tunnel Orbital Sphere Designed with Steven C. Dresner, M.D.
The Quadro-Port Tunnel Orbital Sphere is an ocular implant with a smooth anterior surface and pre-fabricated tunnels for
sutures to pass through when attaching extraocular muscles.
Cat # Diameter
4036 16mm
4037 18mm
4039 20mm
4041 22mm
Conical Orbital Implant (COI)
The Conical Orbital Implant (COI) provides an excellent option for enucleation and evisceration procedures where more
volume is required. The conical shape provides more volume posteriorly; approximately equivalent to the volume of a
sphere with 2mm larger diameter.
Cat # Dimensions
4054 3.0 ml Volume - 16mm Diameter
4055 4.2 ml Volume - 18mm Diameter
4057 5.6 ml Volume - 20mm Diameter
4058 7.4 ml Volume - 22mm Diameter
**Patent Pending Technology
*Available Soon
7. Page 5
Quadro-Port Tunnel Conical Orbital Implant (COI)
Designed with Steven C. Dresner, M.D.
The Quadro-Port Tunnel Conical Orbital Implant (COI) is a conical shaped ocular implant with a smooth anterior surface
and pre-fabricated tunnels for sutures to pass through when attaching extraocular muscles. The conical shape provides
more volume posteriorly; approximately equivalent to the volume of a sphere with 2mm larger diameter.
Cat # Dimensions
4059 3.0 ml Volume - 16mm Diameter
4060 4.2 ml Volume - 18mm Diameter
4062 5.6 ml Volume - 20mm Diameter
4063 7.4 ml Volume - 22mm Diameter
Inferior Orbital Rim
The Inferior Orbital Rim can provide up to 5mm of anterior projection and is designed to be trimmed to meet the needs of
the individual patient.
Cat # Description A B C
4064 Left 43mm 18mm 3.2mm
4065 Right 43mm 18mm 3.2mm
Inferior Medial Orbital Rim
Designed with Rona Z. Silkiss, M.D., FACS
The Inferior Medial Orbital Rim is designed to be placed over the inferior orbital rim and extend superiorly and inferiorly
medial to the inferior orbital nerve.
Cat # Description A B C
4191 Left 25mm 26mm 2.5mm
4192 Right 25mm 26mm 2.5mm
*Available Soon
A
B
C
A
B
C
8. Page 6
Extended Orbital Rim Designed with Robert A. Goldberg, M.D.
The Extended Orbital Rim provides surgeons with a large amount of implant to work with, allowing for trimming as
required, to fit a large array of orbital rim defects.
Cat # Description A B C
4066 Left 47mm 40mm 6.33mm
4067 Right 47mm 40mm 6.33mm
Orbital Rim Onlay Designed with Robert A. Goldberg, M.D.
The Orbital Rim Onlay is designed to augment the lateral and inferior orbital rims and subtly increase the anterior
projection.
Cat # Description A B C
4253 Left 40mm 40mm 8.45mm
4254 Right 40mm 40mm 8.45mm
Superior Lateral Orbital Rim Designed with Oscar M. Ramirez, M.D.
The Superior Lateral Orbital Rim is designed to augment the lateral and superior orbital rims, and is designed to be
trimmed to meet the needs of the individual patient.
Cat # Description A B
4251 Left 33mm 45mm
4252 Right 33mm 45mm
*Available Soon
A
B
C
A
B
C
Midface Contour
The Midface Contour is an onlay designed to augment or repair the non-load bearing bony structures of the midface.
Cat # Description A B C
4255 Left 60mm 40mm 4mm
4256 Right 60mm 40mm 4mm A
B
C
9. Page 7
Complete Orbit
The Complete Orbit is designed to replace non-load bearing bony structures of the orbit.
Cat # Description A B C
4226* Left 77mm 97mm 63mm
4227* Right 77mm 97mm 63mm
Inferior 2/3 Orbit
The Inferior 2/3 Orbit is designed to replace non-load bearing bony structures of the inferior orbit.
Cat # Description A B C
4224* Left 61mm 97mm 60mm
4225* Right 61mm 97mm 60mm
Midface Rim
The Midface Rim is designed to augment and repair non-load bearing bony structures of the midface and the inferior
orbital rim.
Cat # Description A B C
4189 Left 47mm 28mm 3mm
4190 Right 47mm 28mm 3mm
A
B
C
A
B
C
A
B C
10. Page 8
Extended Malar
The Extended Malar is designed to add more volume to the malar or to rebuild the contour of the bony structure.
Cat # Description A B C
4201 Small - Left 45mm 24mm 3mm
4202 Small - Right 45mm 24mm 3mm
4203 Medium - Left 50mm 26mm 4mm
4204 Medium - Right 50mm 26mm 4mm
4205 Large - Left 55mm 27mm 5mm
4206 Large - Right 55mm 27mm 5mm
SP1 Malar Designed with Oscar M. Ramirez, M.D.
The SP1 Malar is designed to subtly augment the malar bone.
Cat # Description A B C
4082 Small - Left 50mm 19mm 3mm
4083 Small - Right 50mm 19mm 3mm
4084 Regular - Left 50mm 19mm 5mm
4085 Regular - Right 50mm 19mm 5mm
SP2 Malar
The SP2 Malar is designed to subtly augment the malar bone.
Contoured Two-Piece Chin
The Contoured Two-Piece Chin is designed with a gradual taper and concave posterior surface to provide an excellent
anatomical fit to the bony anatomy.
Cat # Description A B C
4088 Small 72mm 42mm 3mm
4089 Medium 74mm 42mm 5mm
4090 Large 78mm 50mm 7mm
4091 Extra Large 80mm 55mm 9mm
A
B
C
A
B
C
Cat # Description A B C
4086 Small - Left 64mm 19mm 3mm
4087 Small - Right 64mm 19mm 3mm
4197 Medium - Left 64mm 19mm 4.5mm
4198 Medium - Right 64mm 19mm 4.5mm
4199 Large - Left 64mm 19mm 7mm
4200 Large - Right 64mm 19mm 7mm
A
B
C
A
B
C
11. Page 9
Two-Piece Chin
The Two-Piece Chin is designed to allow for easy insertion and placement of the implant. The surgeon can then attach the
components together for proper alignment.
Cat # Description A B C
4092 Small 56mm 33mm 5mm
4093 Medium 56mm 36mm 7mm
4094 Large 57mm 38mm 9mm
Button Chin
The Button Chin is designed for subtle augmentation to the medial anterior point of the chin. Having multiple sizes allows
the surgeon to select the most natural looking configuration.
Round Extended Chin
The Round Extended Chin is designed to provide tri-dimensional projection (anterior,lateral and inferior).
Square Extended Chin
The Square Extended Chin is designed to provide tri-dimensional projection (anterior, lateral, and inferior).
Cat # Description A B C
4265* Small 40mm 25mm 4mm
4266 Medium 47.5mm 37.5mm 5.5mm
4267 Large 48.5mm 38mm 7mm
Cat # Description A B C
4259* Small 45mm 47mm 3mm
4260* Medium 45mm 47mm 5mm
4261* Large 45mm 47mm 7mm
Cat # Description A B C
4262* Small 45mm 47mm 3mm
4263* Medium 45mm 47mm 5mm
4264* Large 45mm 47mm 7mm
*Available Soon
A
B
C
Small
A
B
C
A
B
C
Medium/Large
12. Page 10
Geniomandibular Groove
The Geniomandibular Groove is designed to augment the geniomandibular groove. The implant is divided medially for
separate insertion of the left and right pieces.
Cat # A B C
4302* 45mm 41mm 4mm
Contoured Mandibular Angle
The Contoured Mandibular Angle is designed to subtly augment the mandible.
Cat # Description A B C
4303 Left 59mm 29mm 7mm
4304 Right 59mm 29mm 7mm
SP Mandibular Angle Designed with Oscar M. Ramirez, M.D.
The SP Mandibular Angle is designed to conform to the posterior and inferior borders of the mandibular angle.
Lateral Augmentation Mandible
The Lateral Augmentation Mandible is designed to subtly augment the lateral projection of the mandible.
Cat # Description A B C D E
4305 Regular - Left 47mm 38mm 3mm 3mm 6.5mm
4306 Regular - Right 47mm 38mm 3mm 3mm 6.5mm
4307 Large - Left 57mm 40mm 4mm 3mm 10mm
4308 Large - Right 57mm 40mm 4mm 3mm 10mm
A
B
C
Cat # Description A B C
4150 Small - Left 65mm 35mm 3mm
4151 Small - Right 65mm 35mm 3mm
4152 Medium - Left 65mm 35mm 7mm
4153 Medium - Right 65mm 35mm 7mm
4154 Large - Left 65mm 35mm 11mm
4155 Large - Right 65mm 35mm 11mm
A
B
C
A
B
C
D
E
*Available Soon
13. Page 11
Ramus of the Mandible
The Ramus of the Mandible is designed for augmentation of the ramus of the mandible.
Cat # Description A B C D E
4095* Large 5mm - Left 79mm 32mm 5mm 10mm 7mm
4096* Large 5mm - Right 79mm 32mm 5mm 10mm 7mm
4097* Large 10mm - Left 79mm 32mm 10mm 10mm 7mm
4098* Large 10mm - Right 79mm 32mm 10mm 10mm 7mm
4145* Regular 5mm - Left 79mm 32mm 5mm 4mm 5mm
4146* Regular 5mm - Right 79mm 32mm 5mm 4mm 5mm
4147* Regular 10mm - Left 79mm 32mm 10mm 4mm 5mm
4148* Regular 10mm - Right 79mm 32mm 10mm 4mm 5mm
Two-Piece Auricular Implant
The design of the SU-POR Auricular implants allow for surgeons to custom shape the height and projection of the helical
rim to match the contralateral ear of the patient. The porous material provides a structural base for a temporal parietal
fascia flap and skin grafts. The success of the implant depends on the technique of the surgeon; the porous structure
requires a vascular tissue flap such as a temporal parietal fascia flap and skin graft, to prevent late exposure of the
implant.
Cat # Description A B
4099 Ear Base - Left 32mm 63mm
4100 Ear Base - Right 32mm 63mm
4101 Helical Rim - Left 39mm 63mm
4102 Helical Rim - Right 39mm 63mm
A
B
A
B
A
BC
D
E
14. Page 12
Nasal Dorsal Shell
The Nasal Dorsal Shell provides surgeons with an excellent option for augmenting or correcting deformities of the nose.
Cat # A B C
4103 43mm 16mm 22mm
Nasal Batten (2 Per Package)
The Nasal Batten is designed for nasal reconstruction procedures involving the external nasal valve. Nasal Battens are
packaged 2 per package.
Nasal Sheet
The Nasal Sheet provides surgeons with a solution for when nasal tip projection is required. The Nasal Sheet can be used
to support the tip by implantation between the medial crura of the alar cartilage.
A
B
C
A
B
C
A
B
C
Ear Wedge
The Ear Wedge is designed to enhance the projection of a surgically reconstructed ear. The Ear Wedge can be trimmed to
match the projection of the contralateral ear.
A
B
C
Cat # Description A B C
4292 Right 15mm 44mm 11mm
4293 Left 15mm 44mm 11mm
Cat # A B C
4240 25mm 12.5mm 0.60mm
Cat # A B C
4107 40mm 9mm 1.1mm
15. Page 13
Nasal Radix
The Nasal Radix offers surgeons an excellent option to augment a low nasal radix.
Nasal Arch
The Nasal Arch can be used effectively to create a nasal onlay where subtle augmentation of the dorsum is required.
Care should be taken to place the Nasal Arch appropriately in the dorsum area and to avoid extending the Nasal Arch
proximally into the soft nasal cartilage area of the tip. The edge of the Nasal Arch should be feathered to promote a a
smooth transition from the implant to the patient’s natural contour.
Nasal Dorsum
The Nasal Dorsum is designed to provide subtle augmentation to the dorsum.
Paranasal
Paranasal implants are designed for augmentation and restoration of the midface in patients who have midfacial
deficiency.
A
B
C
Tapered
Cat # A B C
4243 24mm 3mm 10mm A
C
B
Cat # Description A B C
4244 Small 70mm 13mm 2mm
4245 Medium 70mm 15mm 2mm
4246 Large 70mm 17mm 2mm
Cat # Description A B C
4104 Tapered 55mm 6mm 9mm
4239 Small 54mm 6mm 11mm
4238 Large 67mm 9mm 14mm
A
B
C
Small/Large
Cat # Description A B C
4156 Small - Left 28mm 26mm 4.5mm
4157 Small - Right 28mm 26mm 4.5mm
4158 Large - Left 30mm 28mm 7mm
4159 Large - Right 30mm 28mm 7mm
*Available Soon
A
B
C
16. Page 14
Pterional
The Pterional is designed to correct temporal hollowing in patients who have had surgery involving the pterional approach
to the brain. The implant is placed deep to the temporalis during closure.
Mastoid
The Mastoid provides surgeons with an excellent option for repair of mastoid defects. The regular Mastoid is available in
left and right configurations while the small Mastoid provides a universal fit.
Cranial Flex Grid
The Cranial Flex Grid is designed to fill full thickness cranial defects as an option to calvarial bone grafts. The Cranial Flex
Grid has a design that is strong and flexbile and allows for the implant to be cut to the desired shape.
Temporal Flex Grid
The Temporal Flex Grid is designed to augment deficient soft tissue in the temporal region. The Temporal Flex Grid has a
thin contoured temporal surface designed for a proper anatomical fit and a more natural result.
A
B C
Cat # Description A B C
4122 Left 6mm 43mm 44mm
4123 Right 6mm 43mm 44mm
Cat # Description A B C
4132 Small 36mm 45mm 1.5mm
4124 Left 56mm 53.3mm 1.5mm
4125 Right 56mm 53.3mm 1.5mm
A
B
C
A
B
C
A
B
C
Left/Right Small
Cat # A B C
4108 97mm 106mm 6mm
Cat # Description A B C
4110 Small - Left 61mm 78mm 18mm
4111 Small - Right 61mm 78mm 18mm
4112 Medium - Left 74mm 93mm 20mm
4113 Medium - Right 74mm 93mm 20mm
4114 Large - Left 82mm 105mm 20mm
4115 Large - Right 82mm 105mm 20mm
4363 SP - Small 70mm 70mm 10mm
4364 SP - Medium 88mm 86mm 15mm
4365 SP - Large 98mm 95mm 18mm
A
B
C
A
B
CSP
17. Page 15
Sellar Floor
The Sellar Floor is designed to repair the sellar floor. It is available in two sizes and configurations. The larger Sellar Floor
is designed with three small tabs to facilitate handling and placement while the regular has a single tab. The Large Sellar
Floor also has a membrane layer to aid in preventing tissue ingrowth.
Cranial Dome
The Cranial Dome is designed to provide surgeons with a reconstructive option for large cranial defects. The Cranial
Dome approximates the contour of the superior 1/3 of the cranium and is available in two thicknesses.
Cranial Hemisphere
The Cranial Hemisphere is designed to provide surgeons with a reconstructive option for large cranial defects. The Cranial
Hemisphere provides alternatives to customized implants, grafts, and other implant materials.
A
B
C
A
B
C
Orbito-Zygomatic
The Orbito-Zygomatic is designed for reconstruction of the superior and lateral surfaces of the orbital roof.
A
B
C
Cat # Description A B C D
4126 Regular 20mm 20mm 2.5mm 0.45mm
4129 Large + Membrane 40mm 40mm 2.5mm 0.73mm
Cat # Description A B C
4116 Left 124mm 170mm 4.5mm
4117 Right 124mm 170mm 4.5mm
4118 Left 124mm 170mm 6mm
4119 Right 124mm 170mm 6mm
Cat # A B C
4120 150mm 180mm 4mm
4121 150mm 180mm 6mm
Cat # Description A B C
4072 Left 33mm 38mm 0.8mm
4073 Right 33mm 38mm 0.8mm
A
B
C
D
A
B
C
D
Regular Large + Membrane
18. Page 16
Flex Sheet
The Flex Sheet is designed for small to medium sized cranial defects and deformities. It has a smooth exterior surface and
a series of pedicles on the interior surface that are designed to provide volume and flexibility.
Burr Hole Cover (3 Per Package)
The Burr Hole Cover is designed to fit into and over holes made by a cranial perforator. The large Burr Hole Cover has a
14mm diameter with a stem that is easily modified. The small Burr Hole Cover is designed for 5mm diameter holes.
Block
The SU-POR Block gives surgeons excellent options for craniofacial reconstruction and augmentation. SU-POR Block
implants are available in multiple sizes and thicknesses to ensure that the surgeon has the proper amount of biomaterial
for almost any possible contour or shape required.
Cat # A B C
4019 13mm 38mm 3mm
4020 25mm 50mm 3mm
4021 38mm 63mm 3mm
4022 13mm 38mm 6mm
4023 25mm 50mm 6mm
4024 38mm 63mm 6mm
4025 13mm 38mm 9.5mm
4026 25mm 50mm 9.5mm
4027 38mm 63mm 9.5mm
Cat # Description A B C
4109 Regular 56mm 91mm 4.5mm
4134 Regular + Membrane 56mm 91mm 4.5mm
Cat # Description A B C
4130 Small 15mm 3mm 5mm
4131 Large 29mm 7mm 14mm
A
BC
A
B
CSmall
A
B
C Large
A
B
C