Polyvinylacetate
•Download as PPTX, PDF•
6 likes•5,873 views
Polyvinyl acetate is a colorless, nontoxic thermoplastic resin prepared by the polymerization of vinyl acetate. It was discovered in 1912 in Germany and is one of the most widely used water-dispersed resins. Polyvinyl acetate emulsions are used as latex house paints, artists' media, and common household white glues. It has good weather resistance, withstands water, grease, oil, and petroleum fuels, and has good biodegradation resistance but poor resistance to creep under load. Common uses include latex house paints, white glues, wood glue, paper glue, adhesives, and as a mortar additive.
Report
Share
Report
Share
Recommended
PVAc
This document discusses research proposals for the production of polyvinyl acetate (PVAc) emulsions. It aims to analyze the composition of Mowilith resins, how they are made, production processes and costs. The document outlines the polymerization of PVAc and economic analysis. It also provides details on the emulsion polymerization process, raw material requirements, production cost estimates and a project cash flow analysis for a proposed PVAc plant with an initial capacity of 20,000 tons per year and investment of 10 million euros.
Polyethylene
Plastics has been evolving now a days. Our lives has been filled with plastics. Almost all of our things are made of plastics but do you what it is and what it is made of?
One of the most common and widely used plastic is polyethylene or PE with the resin codes 2 and 4. It is mostly used as plastic bags, food wraps, bulletproof vest, pipes and so many more. Here is a little preview of polyethylene and what is its purpose in our daily lives.
What is polyethylene?
Its properties, structure and applications.
Unsaturated polyester resin as a matrix
Unsaturated polyester resin is prepared from diethylene glycol and maleic anhydride and can be cross-linked with styrene. It is used as a matrix material for fiber reinforced composites. The document discusses the preparation of unsaturated polyester resin and its composites with nano silica, glass fibers, and bagasse fibers. It is found that adding these fillers improves the mechanical, electrical and thermal properties of the composites compared to neat resin. Nano silica composites in particular exhibit better electrical properties than micro silica or neat resin composites.
Poly olefins - Manufacturing & applications
1. Polyolefins are polymers produced from olefin or alkene monomers, with ethylene being the simplest and most common monomer. They are produced via polymerization of ethylene extracted from petroleum through cracking of longer hydrocarbon chains.
2. Low-density polyethylene (LDPE) is produced via free radical polymerization of ethylene under high pressures of 1000-3000 atm and temperatures of 200-275°C. It is used for products like bottles and tubing due to its low cost, chemical resistance, and flexibility.
3. High-density polyethylene (HDPE) is produced using Ziegler-Natta catalysts under lower pressures than LDPE. It is stronger
Polypropylene
This document summarizes key information about polypropylene (PP), a linear polymer composed of isopropane repeating units. PP is prepared using Ziegler catalysts under nitrogen atmosphere and its molecular weight can be controlled with hydrogen. Commercially, PP is usually 90-95% isotactic. Isotactic PP has properties like chemical resistance, stability in boiling water, and good electrical properties. It has applications in automotive parts, packaging, and electrical/electronics due to its workability and resistance to chemicals and heat. The document discusses the structure, properties, processing, additives and applications of PP.
Polypropylene
Polypropylene is a linear hydrocarbon polymer made from the monomer propylene. It was first produced commercially in 1954 using catalysts developed for polyethylene. Polypropylene has applications in areas like automotive components, films, fibers, and foams due to its properties like being semi-rigid, tough, chemically resistant and heat resistant. It is produced via chain-growth polymerization of propene using gas-phase, bulk, or slurry polymerization processes.
Polyvinylchloride(PVC).
Pvc was discovered in the 19th century and developed commercially in the early 20th century. It is made through the polymerization of vinyl chloride, which is synthesized from ethylene. Pvc has a linear structure and is a hard, rigid white solid. It has applications in building materials like pipes and windows, packaging, wire insulation, and automotive and medical products due to its resistance to chemicals, moisture, and fire.
polystyrene
poly styrene is a synthetic aromatic polymer made from the monomer styrene. Polystyrene can be solid or foamed. General purpose polystyrene is clear, hard, and rather brittle. It is an inexpensive resin per unit weight. polystyrene is in a solid (glassy) state at room temperature but flows if heated above about 100 °C, its glass transition temperature. It becomes rigid again when cooled .
Recommended
PVAc
This document discusses research proposals for the production of polyvinyl acetate (PVAc) emulsions. It aims to analyze the composition of Mowilith resins, how they are made, production processes and costs. The document outlines the polymerization of PVAc and economic analysis. It also provides details on the emulsion polymerization process, raw material requirements, production cost estimates and a project cash flow analysis for a proposed PVAc plant with an initial capacity of 20,000 tons per year and investment of 10 million euros.
Polyethylene
Plastics has been evolving now a days. Our lives has been filled with plastics. Almost all of our things are made of plastics but do you what it is and what it is made of?
One of the most common and widely used plastic is polyethylene or PE with the resin codes 2 and 4. It is mostly used as plastic bags, food wraps, bulletproof vest, pipes and so many more. Here is a little preview of polyethylene and what is its purpose in our daily lives.
What is polyethylene?
Its properties, structure and applications.
Unsaturated polyester resin as a matrix
Unsaturated polyester resin is prepared from diethylene glycol and maleic anhydride and can be cross-linked with styrene. It is used as a matrix material for fiber reinforced composites. The document discusses the preparation of unsaturated polyester resin and its composites with nano silica, glass fibers, and bagasse fibers. It is found that adding these fillers improves the mechanical, electrical and thermal properties of the composites compared to neat resin. Nano silica composites in particular exhibit better electrical properties than micro silica or neat resin composites.
Poly olefins - Manufacturing & applications
1. Polyolefins are polymers produced from olefin or alkene monomers, with ethylene being the simplest and most common monomer. They are produced via polymerization of ethylene extracted from petroleum through cracking of longer hydrocarbon chains.
2. Low-density polyethylene (LDPE) is produced via free radical polymerization of ethylene under high pressures of 1000-3000 atm and temperatures of 200-275°C. It is used for products like bottles and tubing due to its low cost, chemical resistance, and flexibility.
3. High-density polyethylene (HDPE) is produced using Ziegler-Natta catalysts under lower pressures than LDPE. It is stronger
Polypropylene
This document summarizes key information about polypropylene (PP), a linear polymer composed of isopropane repeating units. PP is prepared using Ziegler catalysts under nitrogen atmosphere and its molecular weight can be controlled with hydrogen. Commercially, PP is usually 90-95% isotactic. Isotactic PP has properties like chemical resistance, stability in boiling water, and good electrical properties. It has applications in automotive parts, packaging, and electrical/electronics due to its workability and resistance to chemicals and heat. The document discusses the structure, properties, processing, additives and applications of PP.
Polypropylene
Polypropylene is a linear hydrocarbon polymer made from the monomer propylene. It was first produced commercially in 1954 using catalysts developed for polyethylene. Polypropylene has applications in areas like automotive components, films, fibers, and foams due to its properties like being semi-rigid, tough, chemically resistant and heat resistant. It is produced via chain-growth polymerization of propene using gas-phase, bulk, or slurry polymerization processes.
Polyvinylchloride(PVC).
Pvc was discovered in the 19th century and developed commercially in the early 20th century. It is made through the polymerization of vinyl chloride, which is synthesized from ethylene. Pvc has a linear structure and is a hard, rigid white solid. It has applications in building materials like pipes and windows, packaging, wire insulation, and automotive and medical products due to its resistance to chemicals, moisture, and fire.
polystyrene
poly styrene is a synthetic aromatic polymer made from the monomer styrene. Polystyrene can be solid or foamed. General purpose polystyrene is clear, hard, and rather brittle. It is an inexpensive resin per unit weight. polystyrene is in a solid (glassy) state at room temperature but flows if heated above about 100 °C, its glass transition temperature. It becomes rigid again when cooled .
polyamides
This presentation covers almost every aspects of polyamide industrially chemically and applications in detail .
14 phenolic resins 2
Phenolic resins are produced by polycondensation of phenol and aldehyde such as formaldehyde. They were first produced in 1860 and used industrially in 1902. Phenolic resins are hard, heat resistant plastics that can be mixed with other materials for industrial and residential uses. There are two main types - novolacs which require an external curing agent, and resols which do not require external curing. Phenolic resins have properties like strength, chemical resistance, and flame retardancy that make them useful for applications like construction adhesives, abrasives, electrical insulation, and more. Engineering issues in production can include runaway reactions from improper addition of reactants and heat. Suggestions to
Melamine Formaldehyde
Melamine resin or melamine formaldehyde is a hard, thermosetting plastic material made from melamine and formaldehyde by polymerization. The presentation includes the preparation of MF, its properties and applications.
Polysulfone
This document discusses the polymer polysulfone. It provides an introduction to polysulfone, describing its synthesis via polysulfonylation and polyetherification reactions. It discusses the production of major commercial polysulfones by Union Carbide, ICI, and 3M. The properties of polysulfone are summarized, including its high heat resistance, toughness, and chemical resistance. Applications are in electrical components, medical devices, automotive parts, and more due to these desirable properties. The advantages and few limitations of polysulfone are also outlined.
Polypropylene
Polypropylene was first polymerized in the 1950s and commercially produced in the late 1950s. It has properties that make it tough, chemically inert, and cheap to manufacture. Common applications include packaging and containers due to its high melting point and resistance to fatigue. However, it is degraded by UV light and difficult to bond with other materials.
Nylon 6,6 presentation
Nylon 6,6 is a type of polyamide polymer commonly known as nylon. It has a repeating molecular structure formed from the condensation polymerization of hexamethylenediamine and adipic acid, resulting in the loss of water. Nylon 6,6 has various desirable physical properties such as stability, strength, and resistance to water, heat, and chemicals, making it suitable for applications such as tires, ropes, parachutes, swimwear, and machine parts.
Phenolic resins,
Phenolic resins are synthetic resins produced by the condensation of phenol or substituted phenol with an aldehyde like formaldehyde. There are two main types - novolacs and resols. Novolacs are produced under acidic conditions and resols under basic conditions. Phenolic resins have good electrical insulation properties and can retain properties at low temperatures. They are used in applications like circuit boards, radio cabinets, engine ignition equipment, cameras, and aerospace components.
Polyethylene (PE)
This document discusses linear low density polyethylene (LLDPE) films and the role of additives in LLDPE films. It provides background on the production of polyethylene through different processes. It then focuses on LLDPE, describing its production methods, physical characteristics, and common uses in packaging films. The document outlines various types of additives used in LLDPE films, specifically mentioning antioxidants and masterbatches, which are concentrates of additives that enhance polymer properties for specific applications.
Crystallinity in polymers
The document discusses crystallinity in polymers. It defines crystalline and amorphous regions in polymers, and explains that polymers exist as a mixture of crystalline and amorphous phases. It describes how polymer chains fold and organize into crystalline lamellae and spherulites. The degree of crystallinity affects various material properties, and can be measured using techniques like DSC and X-ray diffraction. A higher crystallinity leads to properties like increased hardness, strength and barrier properties.
Polyurethane
Polyurethane is a polymer composed of organic units joined by carbamate links. It exists as both thermosetting and thermoplastic polymers. Polyurethane is used in applications such as flexible and rigid foams, fibers, elastomers, adhesives, coatings, and plastics. It is traditionally made by reacting a di- or polyisocyanate with a polyol. Polyurethane has properties including hardness, strength, resistance and is used in applications like furniture, appliances, composites, electronics, boats, and packaging due to its insulating and protective abilities. Some fungi are able to biodegrade polyurethane.
Pva
Polyvinyl alcohol (PVA) is a water-soluble synthetic polymer. It is produced through the hydrolysis of polyvinyl acetate, not by polymerization of vinyl alcohol. PVA has excellent film-forming, adhesive, and emulsifying properties. It is used in products like eye drops, contact lens solution, and as reinforcement in concrete. PVA dissolves in water due to hydrogen bonding between its hydroxyl groups and water molecules.
NITRIL RUBBER (NBR)
Nitrile rubber (NBR) is produced from a copolymer of acrylonitrile and butadiene. It is oil-resistant and commonly used in fuel hoses, gaskets, and other products requiring oil resistance. NBR is produced via emulsion polymerization of acrylonitrile and butadiene monomers in water, followed by coagulation of the polymer latex to form crumb rubber. Properties of NBR depend on the percentage of acrylonitrile, with higher percentages providing better oil and chemical resistance but reduced flexibility at lower temperatures.
Epoxy Resin
Introduction, types, raw material, reaction mechanism, manufacturing process, flow sheet of production process, properties, applications, industries in India, commercial name
Epoxy resin composites
Epoxy resins are thermosetting polymers containing at least two epoxide groups. They are prepared through the reaction of bisphenol A and epichlorohydrin to form bisphenol A diglycidyl ethers. Epoxy resins can be cured through reaction with amines, acids, or anhydrides, forming a cross-linked three dimensional network structure. Common applications include surface coatings, composites with fibers like carbon and glass, which provide high strength and stiffness with lighter weight than metals.
Industrial processes for synthesis of polypropylene
The document discusses polypropylene (PP), a widely used thermoplastic polymer produced from the monomer propylene. It describes PP's properties and common applications. The main commercial technologies for PP production are Unipol and LyondellBasell Spheripol processes, which involve purifying feedstocks, polymerization in gas or liquid phases, and recovering monomers. PP manufacturing can be categorized by polymerization method into solvent, bulk, and vapor phase processes using different reactor types.
Polyamide
Polyamide fibers are composed of long molecular chains containing repeating amide groups. The two most common polyamides used to produce nylon fibers are nylon 6, which is made from caprolactam, and nylon 6,6, which is made from adipic acid and hexamethylenediamine. Nylon 6 is produced by polymerizing caprolactam, a white solid made from coal tar derivatives, above 500°C. Nylon 6,6 is formed through condensation polymerization of adipic acid and hexamethylenediamine with the loss of water. Both nylons are melt spun into fibers and widely used in applications such as fabrics, carpets, ropes and tires
Polyurethane-structure,types,properties,preparation,application
Polyurethane is a polymer composed of organic units joined by carbamate links. It was first developed in the 1930s as a replacement for rubber. There are various types of polyurethanes including flexible foam, rigid foam, coatings, adhesives, sealants, elastomers and thermoplastic polyurethane. Polyurethanes are synthesized through the reaction of polyols with isocyanates. They have a wide range of applications including cushioning, insulation, automotive parts, footwear, packaging and medical devices due to their abrasion resistance, flexibility, toughness and other beneficial properties.
Preparation of Phenol-Formaldehyde Resin
History
Introduction
Apparatus Required
Chemical Required
Principle
Chemical Reaction
Procedure
Application
FTIR Analysis
Polybutadiene
Polybutadiene is a synthetic rubber polymerized from the monomer 1,3-butadiene. It was first synthesized in 1910 and accounts for about a quarter of global synthetic rubber production, with around 70% used in tire manufacturing. Polybutadiene can be produced through various polymerization methods and processed through techniques like injection molding. It has good abrasion resistance and flexibility but poor resistance to oil and gasoline. Research articles discussed using sepiolite nanofibers to improve the mechanical properties of polybutadiene rubber composites and emulsion polymerization methods to synthesize polybutadiene nanoparticles. In conclusion, polybutadiene will continue to be widely used in tires and other applications due to its
Nylon 6
Nylon 6 is a semicrystalline thermoplastic polymer synthesized from caprolactam via ring-opening polymerization. It has high tensile strength, elasticity, and resistance to abrasion and chemicals. Common applications include fibers, ropes, bristles, gears, bearings, surgical sutures, and more. Nylon degrades slowly and is used for banners, flags, clothing like jackets, and other outdoor materials due to its durability against UV light and weathering.
More Related Content
What's hot
polyamides
This presentation covers almost every aspects of polyamide industrially chemically and applications in detail .
14 phenolic resins 2
Phenolic resins are produced by polycondensation of phenol and aldehyde such as formaldehyde. They were first produced in 1860 and used industrially in 1902. Phenolic resins are hard, heat resistant plastics that can be mixed with other materials for industrial and residential uses. There are two main types - novolacs which require an external curing agent, and resols which do not require external curing. Phenolic resins have properties like strength, chemical resistance, and flame retardancy that make them useful for applications like construction adhesives, abrasives, electrical insulation, and more. Engineering issues in production can include runaway reactions from improper addition of reactants and heat. Suggestions to
Melamine Formaldehyde
Melamine resin or melamine formaldehyde is a hard, thermosetting plastic material made from melamine and formaldehyde by polymerization. The presentation includes the preparation of MF, its properties and applications.
Polysulfone
This document discusses the polymer polysulfone. It provides an introduction to polysulfone, describing its synthesis via polysulfonylation and polyetherification reactions. It discusses the production of major commercial polysulfones by Union Carbide, ICI, and 3M. The properties of polysulfone are summarized, including its high heat resistance, toughness, and chemical resistance. Applications are in electrical components, medical devices, automotive parts, and more due to these desirable properties. The advantages and few limitations of polysulfone are also outlined.
Polypropylene
Polypropylene was first polymerized in the 1950s and commercially produced in the late 1950s. It has properties that make it tough, chemically inert, and cheap to manufacture. Common applications include packaging and containers due to its high melting point and resistance to fatigue. However, it is degraded by UV light and difficult to bond with other materials.
Nylon 6,6 presentation
Nylon 6,6 is a type of polyamide polymer commonly known as nylon. It has a repeating molecular structure formed from the condensation polymerization of hexamethylenediamine and adipic acid, resulting in the loss of water. Nylon 6,6 has various desirable physical properties such as stability, strength, and resistance to water, heat, and chemicals, making it suitable for applications such as tires, ropes, parachutes, swimwear, and machine parts.
Phenolic resins,
Phenolic resins are synthetic resins produced by the condensation of phenol or substituted phenol with an aldehyde like formaldehyde. There are two main types - novolacs and resols. Novolacs are produced under acidic conditions and resols under basic conditions. Phenolic resins have good electrical insulation properties and can retain properties at low temperatures. They are used in applications like circuit boards, radio cabinets, engine ignition equipment, cameras, and aerospace components.
Polyethylene (PE)
This document discusses linear low density polyethylene (LLDPE) films and the role of additives in LLDPE films. It provides background on the production of polyethylene through different processes. It then focuses on LLDPE, describing its production methods, physical characteristics, and common uses in packaging films. The document outlines various types of additives used in LLDPE films, specifically mentioning antioxidants and masterbatches, which are concentrates of additives that enhance polymer properties for specific applications.
Crystallinity in polymers
The document discusses crystallinity in polymers. It defines crystalline and amorphous regions in polymers, and explains that polymers exist as a mixture of crystalline and amorphous phases. It describes how polymer chains fold and organize into crystalline lamellae and spherulites. The degree of crystallinity affects various material properties, and can be measured using techniques like DSC and X-ray diffraction. A higher crystallinity leads to properties like increased hardness, strength and barrier properties.
Polyurethane
Polyurethane is a polymer composed of organic units joined by carbamate links. It exists as both thermosetting and thermoplastic polymers. Polyurethane is used in applications such as flexible and rigid foams, fibers, elastomers, adhesives, coatings, and plastics. It is traditionally made by reacting a di- or polyisocyanate with a polyol. Polyurethane has properties including hardness, strength, resistance and is used in applications like furniture, appliances, composites, electronics, boats, and packaging due to its insulating and protective abilities. Some fungi are able to biodegrade polyurethane.
Pva
Polyvinyl alcohol (PVA) is a water-soluble synthetic polymer. It is produced through the hydrolysis of polyvinyl acetate, not by polymerization of vinyl alcohol. PVA has excellent film-forming, adhesive, and emulsifying properties. It is used in products like eye drops, contact lens solution, and as reinforcement in concrete. PVA dissolves in water due to hydrogen bonding between its hydroxyl groups and water molecules.
NITRIL RUBBER (NBR)
Nitrile rubber (NBR) is produced from a copolymer of acrylonitrile and butadiene. It is oil-resistant and commonly used in fuel hoses, gaskets, and other products requiring oil resistance. NBR is produced via emulsion polymerization of acrylonitrile and butadiene monomers in water, followed by coagulation of the polymer latex to form crumb rubber. Properties of NBR depend on the percentage of acrylonitrile, with higher percentages providing better oil and chemical resistance but reduced flexibility at lower temperatures.
Epoxy Resin
Introduction, types, raw material, reaction mechanism, manufacturing process, flow sheet of production process, properties, applications, industries in India, commercial name
Epoxy resin composites
Epoxy resins are thermosetting polymers containing at least two epoxide groups. They are prepared through the reaction of bisphenol A and epichlorohydrin to form bisphenol A diglycidyl ethers. Epoxy resins can be cured through reaction with amines, acids, or anhydrides, forming a cross-linked three dimensional network structure. Common applications include surface coatings, composites with fibers like carbon and glass, which provide high strength and stiffness with lighter weight than metals.
Industrial processes for synthesis of polypropylene
The document discusses polypropylene (PP), a widely used thermoplastic polymer produced from the monomer propylene. It describes PP's properties and common applications. The main commercial technologies for PP production are Unipol and LyondellBasell Spheripol processes, which involve purifying feedstocks, polymerization in gas or liquid phases, and recovering monomers. PP manufacturing can be categorized by polymerization method into solvent, bulk, and vapor phase processes using different reactor types.
Polyamide
Polyamide fibers are composed of long molecular chains containing repeating amide groups. The two most common polyamides used to produce nylon fibers are nylon 6, which is made from caprolactam, and nylon 6,6, which is made from adipic acid and hexamethylenediamine. Nylon 6 is produced by polymerizing caprolactam, a white solid made from coal tar derivatives, above 500°C. Nylon 6,6 is formed through condensation polymerization of adipic acid and hexamethylenediamine with the loss of water. Both nylons are melt spun into fibers and widely used in applications such as fabrics, carpets, ropes and tires
Polyurethane-structure,types,properties,preparation,application
Polyurethane is a polymer composed of organic units joined by carbamate links. It was first developed in the 1930s as a replacement for rubber. There are various types of polyurethanes including flexible foam, rigid foam, coatings, adhesives, sealants, elastomers and thermoplastic polyurethane. Polyurethanes are synthesized through the reaction of polyols with isocyanates. They have a wide range of applications including cushioning, insulation, automotive parts, footwear, packaging and medical devices due to their abrasion resistance, flexibility, toughness and other beneficial properties.
Preparation of Phenol-Formaldehyde Resin
History
Introduction
Apparatus Required
Chemical Required
Principle
Chemical Reaction
Procedure
Application
FTIR Analysis
Polybutadiene
Polybutadiene is a synthetic rubber polymerized from the monomer 1,3-butadiene. It was first synthesized in 1910 and accounts for about a quarter of global synthetic rubber production, with around 70% used in tire manufacturing. Polybutadiene can be produced through various polymerization methods and processed through techniques like injection molding. It has good abrasion resistance and flexibility but poor resistance to oil and gasoline. Research articles discussed using sepiolite nanofibers to improve the mechanical properties of polybutadiene rubber composites and emulsion polymerization methods to synthesize polybutadiene nanoparticles. In conclusion, polybutadiene will continue to be widely used in tires and other applications due to its
Nylon 6
Nylon 6 is a semicrystalline thermoplastic polymer synthesized from caprolactam via ring-opening polymerization. It has high tensile strength, elasticity, and resistance to abrasion and chemicals. Common applications include fibers, ropes, bristles, gears, bearings, surgical sutures, and more. Nylon degrades slowly and is used for banners, flags, clothing like jackets, and other outdoor materials due to its durability against UV light and weathering.
What's hot (20)
Industrial processes for synthesis of polypropylene
Industrial processes for synthesis of polypropylene
Polyurethane-structure,types,properties,preparation,application
Polyurethane-structure,types,properties,preparation,application
Viewers also liked
Pet Bottles
Water bottles have recently had a huge impact on our culture and environment. While recycling PET materials is positive, chemicals like bisphenol A and antimony can leach from bottles with heat exposure or prolonged storage. Reusing bottles moderately and at safe temperatures can be safe, but single-use bottles often harbor bacteria if reused.
PACKAGING PLASTIC MANUFACTURE
Packaging is best described as a coordinated system of
preparing goods for transport, distribution, storage,
retailing, and use of the goods. Contains, Types, Procedure of manufacturing the plastics, Advantages & Disadvantages.
Polycarbonate
1. The document summarizes information about polycarbonate presented by the Smile Group to the Chemical Department faculty of engineering.
2. Polycarbonate is a thermoplastic polymer with strong, durable, and impact-resistant properties making it suitable for a variety of industrial and commercial applications.
3. The presentation covers the history, chemical structure, production process through condensation reaction, properties, classification, morphology, methods of production, mechanical strength and various applications of polycarbonate.
Plastics
Plastic poses significant environmental problems. It is made from polymers that do not degrade and can persist in the environment for centuries. When plastic litter ends up in oceans and waterways, it kills over 100,000 marine animals every year either through ingestion or entanglement. Plastic bag litter also pollutes landscapes worldwide. While recycling aims to reduce plastic waste, the recycling process itself can release toxic fumes and harm workers. Small actions like using reusable tote bags and reducing single-use plastic can help address this global issue. Government regulations and individual responsibility are both important to lessen the environmental impact of plastics.
Plastic impacts on the natural Environment
The document provides an overview of plastics, including their properties, types, production, uses, and environmental impacts. It discusses how plastics are polymers made from petrochemicals and can be thermoplastics or thermosets. The major types of plastics like polyethylene, PVC, and polystyrene are described. The document also outlines the positive aspects of plastics but notes they are not biodegradable and can pollute land, water, and air when discarded. Plastic waste is a growing problem and poses health risks to both wildlife and humans. Ways to reduce plastic pollution through refuse, reduce, reuse, and recycle strategies are suggested.
Plastic use as building material ppt
Plastic is a synthetic material made from organic polymers that can be molded while soft and set into a rigid form. It is classified based on its behavior with heat (thermoplastics soften with heat, thermosetting plastics harden permanently), structure (homogeneous or heterogeneous), and properties (rigid, semi-rigid, soft, elastic). Common thermoplastics include polyethylene, PVC, and nylon, while epoxies, phenolics, and polyesters are thermosetting plastics. Plastics are composed of polymers, carbon, oxygen, and other elements, and may include additives like fillers, pigments, plasticizers, and catalysts to modify their properties.
Plastic Slideshow
The document discusses the history and rise of plastic from its invention in the 1860s to modern day uses and environmental concerns. It traces some of the key plastics developed like Bakelite, vinyl, nylon, polyethylene, polyester, and describes how plastics revolutionized industries like packaging, clothing, automobiles. However, it also notes that many plastics are toxic and release dangerous chemicals, contributing to pollution and health issues that environmentalists are now urging regulators to address.
Plastics .ppt
Hi i'am Sean , i study in OUR OWN ENGLISH HIGH SCHOOL .This is a power point on plastics , to help us understand what is a plastic , what are the types of plastic and what harm do they cause to our environment
Polymer ppt
The document discusses polymers including their classification, types of polymerization, characteristics, and applications. Polymers can be classified based on source, structure, polymerization method, and molecular forces. There are two main types of polymerization - addition and condensation. Polymers have characteristics like low density, corrosion resistance, and moldability. They have wide applications in medicine, consumer products, industry, and sports equipment.
Polymers
Polymers are macromolecules formed by linking together small repeating units called monomers. There are two main types of polymerization: addition and condensation. Addition polymers are formed without the elimination of small molecules when monomers containing carbon-carbon double bonds polymerize via a chain reaction mechanism involving three steps: initiation, propagation, and termination. Condensation polymers are formed with the elimination of small molecules like water or ammonia when bifunctional monomers react. Common examples of addition polymerization include polyethylene formed from ethylene monomers using a free radical initiator like benzoyl peroxide.
Plastic pollution ppt
Plastic poses serious threats to the environment and human life. It pollutes oceans and beaches, kills animals that ingest it, and takes over 1000 years to decompose. The production of plastic involves toxic chemicals like benzene that can cause cancer. Recycling plastic is also hazardous due to toxic fumes. Individual actions like reducing single-use plastic bag use and recycling bags can help address this problem.
Viewers also liked (13)
Similar to Polyvinylacetate
Cellulose Based -Biodegradable Polymers.pptx
This document discusses types of biodegradable polymers. It describes several categories of biodegradable polymers including starch-based polymers, cellulose-based polymers, bacterial polyesters, and synthetic biodegradable polymers. Starch-based polymers include thermoplastic starch, starch blended with synthetic aliphatic polyesters, starch blended with PBS or PBSA, and starch blended with PVOH. Cellulose-based polymers include cellulose esters and celluloid. Examples of bacterial polyesters discussed are PHA, PHB, PHB/HV, and PCL. The document also provides details on popular synthetic biodegradable polymers including PLA, PCL, PGA, P
Bacterial degradation of pet
This document discusses plastic and the bacterium Ideonella sakaiensis. It introduces common types of plastics like PET and describes properties and production of PET. It then discusses the discovery of I. sakaiensis, a bacterium able to break down PET into its monomers through two enzymes. While I. sakaiensis currently breaks down PET films slowly, its discovery could improve plastic recycling by providing a more environmentally friendly degradation process compared to chemical methods.
Poly acrylicacid kudzai hamish ruzvidzo
Polyacrylic acid (PAA) is a polymer made from acrylic acid monomer units that are cross-linked. Unlike most polymers that repel water, PAA is highly absorbent due to carboxylic acid groups that attract water molecules. PAA absorbs and retains large amounts of water, swelling to many times its original size. It has applications as a thickening agent in cosmetics, pharmaceuticals, and paints, as well as uses in disposable diapers, hand sanitizers, and other personal care products due to its water-absorbing properties.
Polymers,PVC
Polymers are substances made of large molecules formed by linking many small repeating molecular units. There are natural and synthetic polymers, as well as linear and commercial polymers like polyethylene, polypropylene, polyvinyl chloride, polyvinyl acetate, polystyrene, and polyacrylonitrile. Polyvinyl chloride is produced through heating vinyl chloride in the presence of a catalyst and is colorless, odorless, non-flammable and resistant to light, acids and bases. It has a wide range of uses like pipes, sheets, and parts for refrigerators, cycles, tires, and more. Polymers have many applications in daily life, sports, medicine, aerospace, electronics, and defense
8 resins pharmacognosy notess
Resins are complex mixtures found throughout the plant kingdom but rarely in ferns. They occur in secretory structures like resin cells, schizogenous ducts, and glandular hairs. Resins are insoluble in water but soluble in organic solvents. They include constituents like resin acids, resinols, resin esters. Common resins discussed include colophony, podophyllum, cannabis, and turpentine. Colophony is obtained from pine trees and contains abietic acid. Podophyllum resin is extracted from the rhizome and contains podophyllotoxin. Cannabis resin contains tetrahydrocannabinol and is used medicinally. Turpentine is the oleoresin secreted from pine trees
Basic products for finishing applications
This document provides information on basic products used for leather finishing, including leather coating colors, organic dyes, thermoplastic and cross-linking binders, and non-thermoplastic binders. It discusses various water-dilutable and solvent-dilutable finishing materials such as finishes containing casein, nitrocellulose finishes, polymer dispersions, and water-dilutable and solvent-soluble dyes. The document also summarizes important thermoplastic binders including polyacrylates, polymethacrylates, polyurethane, and their properties.
Bacterial degradation of plastic
Today the world is facing problem related to spread of plastic all around us which cause infection and pollution. PET {poly(ethylene terephthalate)} is extensively used throughout the world. PET is made from petroleum and is widely used in textile industries and plastic bottles. Most of the PET product simply end up by land filling and never enter the recycling process. About 56 million ton of PET was produce worldwide in 2013 alone. Currently the only PET products being recycled are bottles, but the amount of recycled account are just 37% of the total production volume of PET bottle i.e. 6.13 million tons. Currently the chemical method is being used to recycle PET waste, which is quite energy consuming process and shows only assimilation of PET waste. Various microorganisms have also been reported to assimilate PET waste. However, assimilation is not the final solution of this problem as it is only a partial degradation. Recently, a novel microorganism Ideonella sakaiensis strain 201-F6 has been identified which uses PET as an energy resource and is able to produce environment friendly bi products such as ethylene glycol and terephthalic acid. Scientists also discovered two enzymes (PETase and MHETase) produced by the strain 201-F6 which hydrolyze PET. Based on the property of PETase and MHETase it is now understood that the strain 201-F6 is capable to use PET as its major energy source and convert it into easily degradable components.
LRA-product-guide-EMEA-March-2017.pdf
Allnex is a leading global producer of liquid coating resins and additives. It has €2.2 billion in annual sales with operations in over 100 countries. The document provides an introduction and overview of Allnex's broad product portfolio including solvent-borne and water-borne resins such as acrylics, alkyds, epoxies, polyesters, and additives. Product information includes trade names, chemistry, properties, and end use applications.
Adhesive manisha
The document discusses different types of adhesives, including natural adhesives like casein and animal glues, thermoplastic adhesives like polyvinyl acetate, and thermosetting adhesives such as phenol formaldehyde, urea formaldehyde, and epoxy resins. It also covers the British Standards Institution (BSI) which tests products to confirm manufacturer claims and has a classification system for adhesives based on moisture resistance, gap filling ability, and general usage.
Adhesive manisha
The document discusses different types of adhesives, including natural adhesives like casein glue and animal glue, thermoplastic adhesives like polyvinyl acetate, thermosetting adhesives such as phenol formaldehyde and epoxy resin, and rubber adhesives. It provides details on the composition and uses of these various adhesives and discusses British standard classifications for adhesives.
Plastics Manufacturing Industry
The Plastic Factory is a full-service plastics distributor and fabrication company offering a full range of plastic materials and accessories for all your engineering and construction needs.
Since the start of its mass production in the 1940s, plastic has become a ubiquitous part of human life. As of 2017, the global production of plastics had increased to nearly 350 million metric tons. By the year 2050, plastic production is expected to have tripled and will account for a fifth of global oil consumption.
Microbial production of solvents
This document summarizes microbial production of various solvents like ethanol, acetone, butanol, and glycerol. It describes the common uses of solvents and details the processes of ethanol production through both petrochemical and biological fermentation methods. The biological fermentation process involves steps like saccharification, liquefaction, milling, fermentation, and distillation. It also discusses the advantages of using bacteria like Z. mobilis and C. ljungdahlii over yeast for ethanol production, as well as the production methods for acetone, butanol, and glycerol.
5 POLYMERS manufacture.pptx (a dynamic overview)
The document discusses different types of polymers including urea formaldehyde, phenol formaldehyde, and polyvinyl chloride. It describes the basic polymerization techniques of condensation and addition polymerization. Condensation polymerization produces thermosetting resins while addition polymerization produces thermoplastic resins. The document then provides details on the manufacturing processes for specific polymers, including the preparation of urea-formaldehyde and phenol-formaldehyde resins as well as the production of polyvinyl chloride through suspension polymerization of vinyl chloride monomer.
Pvc
PVC is the third most widely used plastic. It was accidentally discovered in the 19th century when a white solid formed in flasks of vinyl chloride exposed to sunlight. PVC is produced via suspension or emulsion polymerization of vinyl chloride monomer. It has a linear structure and atactic stereochemistry. PVC has applications in pipes, cables, flooring and more due to its low cost, durability and resistance to chemicals and corrosion. However, it has disadvantages like difficulty recycling and sensitivity to heat and UV degradation.
Presence of volatile organic compounds in fine coat paint used in house dec...
This document analyzes paint samples commonly used for house painting in Nigeria. Chemical tests found the presence of alcohols, ketones, and aldehydes in the samples. Specifically, the maximum levels detected were 0.65 ppm of formaldehyde, 0.60 ppm of acetone, and 0.75 ppm of alcohol. While not acutely toxic, long-term exposure to these volatile organic compounds (VOCs) can have compounding health effects due to their ability to cause irritation and potentially cancer. The document also provides background on the typical chemical composition of paint, including binders, resins, pigments, and solvents which contribute most to VOC levels.
PVDF material compatible with bioethanol
This document discusses the advantages and production of bioethanol. It summarizes that bioethanol has benefits over fossil fuels such as being renewable, having lower greenhouse gas emissions, and providing economic benefits. The document then describes the production process of bioethanol and some of the materials compatibility challenges with biofuels. It highlights that PVDF is well-suited for use with biofuels since it exhibits low permeation, maintains its physical properties, and is resistant to corrosion from biofuels.
Raw materials for radiation curing inks
The document discusses formulations for UV curable inks. It states that formulations typically contain 20-35% oligomers, 10-25% monomers, 15-20% pigments, and 1-5% additives. Epoxy acrylate, urethane acrylate, and polyester acrylate are common oligomers that provide properties like adhesion and reactivity. Reactive diluents like mono-functional, di-functional, and tri-functional acrylates are added to reduce viscosity while maintaining reactivity. Photoinitiators are needed to initiate polymerization and are classified as type I or II depending on their mechanism of radical generation.
PVC plastics
PVC is a polymer derived from sodium chloride and oil or natural gas. It is a white, odorless powder that is light, non-flammable, and resistant to chemicals and compression. PVC can be recycled and has many applications, as it does not degrade in water and has a long service life. Common uses of PVC include wire and pipe insulation, construction materials, toys, automotive parts, medical devices, and more.
Impressions in fixed partial dentures/certified fixed orthodontic courses by ...
Impressions in fixed partial dentures/certified fixed orthodontic courses by ...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
General chemistry (unit iv)
This document provides information about polymers, fibers, resins, and plastics covered in a General Chemistry unit. It defines addition and condensation polymerization and provides examples. Key fibers discussed include nylon 6,6 and polyester. Resins defined include amino resins and unsaturated polyester resin. Plastics are classified as thermoplastics like polyethylene and polyvinyl chloride, which are discussed in terms of their manufacture and uses.
Similar to Polyvinylacetate (20)
Presence of volatile organic compounds in fine coat paint used in house dec...
Presence of volatile organic compounds in fine coat paint used in house dec...
Impressions in fixed partial dentures/certified fixed orthodontic courses by ...
Impressions in fixed partial dentures/certified fixed orthodontic courses by ...
Recently uploaded
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Software Engineering and Project Management - Software Testing + Agile Method...
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Recently uploaded (20)
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Software Engineering and Project Management - Software Testing + Agile Method...
Software Engineering and Project Management - Software Testing + Agile Method...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Polyvinylacetate
- 1. By Engineer Nathan.J.Chifamba B-tech Hons Chemical and Process Systems Engineering (Harare Institute of Technology ,Zimbabwe) M-Tech Polymer Science and Technology (Amity University Gurgaon India) Polymer Technology Presentation (Dr Nidhi Goel lecturer) 22/12/2016
- 3. Brief History • Poly(vinyl acetate) was discovered in Germany in 1912 by Fritz Klatte. • The monomer, vinyl acetate, was first produced on an industrial scale by addition of acetic acid to acetylene with a mercury(I) salt but it is now primarily made by palladium catalyzed oxidative addition of acetic acid to ethylene. • Polyvinyl acetate is prepared by polymerization of vinyl acetate monomer (free radical vinyl polymerization of the monomer vinyl acetate).
- 4. INTRODUCTION • it is a colorless, nontoxic thermoplastic resin prepared by the polymerization of vinyl acetate. Polyvinyl acetate (PVAC) It is one of the most widely used water-dispersed resins. • Polyvinyl acetate water-based emulsions have been used as latex house paints, artists' media (since 1945), and common household white glues.. • Poly(vinyl acetate) (PVA, PVAc, poly(ethenyl ethanoate) • It is commonly referred to as wood glue, white glue, carpenter's glue, school glue, Elmer's glue in the US, or PVA glue) • It is an aliphatic rubbery synthetic polymer with the formula (C4H6O2)n. It belongs to the polyvinyl esters family with the general formula - [RCOOCHCH2]-.
- 5. PROPERTIES Under alkaline conditions, boron compounds such as boric acid or borax cause the polymer to cross-link. A number of microorganisms can degrade polyvinyl acetate(fungi and algae). Sets by the removal of water due to evaporation or absorption into a substrate. Have good weather resistance Withstand water, grease, oil, and petroleum fuels degradation. good biodegradation resistance poor resistance to creep under load. Softens at 30-45C Soluble in benzene, chloroform, methanol, acetone, butyl acetate Insoluble in ligroin, diethyl ether, butanol, turpentine, water, oils Can absorb 3-5% water when immersed for 16 hours at 60 C. Burns with a dark yellow flame that smells of acetic acid. Combustible.
- 6. Uses • PVA water-based emulsions have been used as latex house paints. • Making commonly used household white glues. • Making wood glue. • Makin paper glue. • Adhesives. • Glues for porous material. • Used as a primer for drywall and other substrates. • As a mortar additive.
- 7. 7 Mechanism (free radical Polymerization)