Perwaja Steel Job Scop
•Download as DOC, PDF•
0 likes•433 views
This job posting is for a Position Manager for Direct Reduction Plant (PM-DR-E&I) at Perwaja Steel Sdn Bhd. The responsibilities include maintenance, monitoring, and repair of electrical equipment up to 33kV including turbine generators, switchgear, motors, control panels, and transformers. Duties also involve creating work plans for overhauling high and low voltage motors, performing electrical testing, and conducting routine and preventive maintenance. The candidate should have experience installing, maintaining, and troubleshooting electrical motors and panels as well as calibrating instrumentation such as pressure and temperature transmitters.
Report
Share
Report
Share
Recommended
Elmer Lainez
Elmer Lainez is an industrial electrician with nearly nine years of experience holding a California General Journeyman license. He has worked in various positions for companies such as Ardent, Electrical Systems and Instrumentation, and Braun Electric. Lainez is seeking full time employment where he can continue expanding his skills and knowledge of electrical installation, maintenance, and troubleshooting.
Speed control of dc motors
This document discusses speed control methods for DC motors. It begins by explaining that DC motors can achieve fine speed control through simple methods, which is their main advantage over AC motors. It then describes the three main speed control methods for DC motors as varying the flux, armature resistance, or applied voltage. Subsequent sections provide more details on speed control for shunt motors and series motors, including flux control, armature control, voltage control, and numerical examples. The document is intended to teach speed control of DC motors through lecture notes.
Raghu Resume
Raghu Venukadasula is applying for a position with ALSTOM Projects India Ltd. He has over 8 years of experience commissioning electrical systems for power plants. His experience includes commissioning generator and transformer protections, switchgears, generators, DC/UPS systems, and more. He was also involved in site management, coordinating commissioning activities and serving as a turn over package engineer. He provides details on his commissioning experience on various projects in India, Ghana, Iraq, Algeria, and Saudi Arabia.
Nstark 2015
Nathan Stark has over 15 years of experience in mechanical engineering, hydraulics, and heavy equipment maintenance. He currently works as a Hydraulic Engineer for Maersk where he helps commission new drillships and oversees maintenance. Prior to this he spent 3 years as a Rig Mechanic for Transocean maintaining offshore drilling rigs. Nathan has extensive qualifications and licenses related to heavy vehicles, cranes, welding, and industrial machinery. He is skilled in hydraulics, engines, compressors, generators and has experience with various mining and construction equipment brands. References are available upon request.
Speed control of dc motors
The document discusses several methods for controlling the speed of DC motors, including:
1) Armature resistance control, where increasing armature resistance decreases current and speed.
2) Field flux control, where decreasing flux through the field coils increases speed.
3) Field and armature divertor controls, where diverting current away decreases flux and increases speed.
4) Tapped field and paralleling field controls change the motor's flux through different field coil configurations to vary speed.
5) The Ward Leonard control system uses an AC or DC motor to drive a generator coupled to the motor being controlled, allowing very smooth speed variation.
CV_Shahzad Ali protection engineer
This document contains the resume of Muhammad Shahzad Ali, a power protection engineer with over 8 years of experience in power protection and substation automation. It summarizes his work experience as a site manager and commissioning engineer on various substation projects in Saudi Arabia. It also lists the various electrical relays, software, commissioning activities and substations he has experience with.
ETAP - Load flow and panel rev2014-1
This document provides an overview of load flow analysis in ETAP software. It discusses load flow concepts such as determining steady state operating conditions, sizing equipment, and verifying operational limits. It also describes load flow requirements in ETAP like equipment data and models different load types commonly found in power systems. The document outlines how loads are modeled in ETAP, including constant power, constant impedance and lumped loads. It provides examples of calculating motor nameplate values from ratings and determining load values.
Unit iv conventional and solid state speed control of dc motors
This document discusses speed control methods for DC motors, including conventional and solid state control. It describes various speed control techniques for shunt motors and series motors such as flux control, armature voltage control, and the Ward-Leonard system. For solid state control, it covers phase-controlled rectifier drives and chopper drives. Phase-controlled rectifier drives can use single-phase or three-phase configurations while providing benefits like faster response and higher efficiency over conventional methods.
Recommended
Elmer Lainez
Elmer Lainez is an industrial electrician with nearly nine years of experience holding a California General Journeyman license. He has worked in various positions for companies such as Ardent, Electrical Systems and Instrumentation, and Braun Electric. Lainez is seeking full time employment where he can continue expanding his skills and knowledge of electrical installation, maintenance, and troubleshooting.
Speed control of dc motors
This document discusses speed control methods for DC motors. It begins by explaining that DC motors can achieve fine speed control through simple methods, which is their main advantage over AC motors. It then describes the three main speed control methods for DC motors as varying the flux, armature resistance, or applied voltage. Subsequent sections provide more details on speed control for shunt motors and series motors, including flux control, armature control, voltage control, and numerical examples. The document is intended to teach speed control of DC motors through lecture notes.
Raghu Resume
Raghu Venukadasula is applying for a position with ALSTOM Projects India Ltd. He has over 8 years of experience commissioning electrical systems for power plants. His experience includes commissioning generator and transformer protections, switchgears, generators, DC/UPS systems, and more. He was also involved in site management, coordinating commissioning activities and serving as a turn over package engineer. He provides details on his commissioning experience on various projects in India, Ghana, Iraq, Algeria, and Saudi Arabia.
Nstark 2015
Nathan Stark has over 15 years of experience in mechanical engineering, hydraulics, and heavy equipment maintenance. He currently works as a Hydraulic Engineer for Maersk where he helps commission new drillships and oversees maintenance. Prior to this he spent 3 years as a Rig Mechanic for Transocean maintaining offshore drilling rigs. Nathan has extensive qualifications and licenses related to heavy vehicles, cranes, welding, and industrial machinery. He is skilled in hydraulics, engines, compressors, generators and has experience with various mining and construction equipment brands. References are available upon request.
Speed control of dc motors
The document discusses several methods for controlling the speed of DC motors, including:
1) Armature resistance control, where increasing armature resistance decreases current and speed.
2) Field flux control, where decreasing flux through the field coils increases speed.
3) Field and armature divertor controls, where diverting current away decreases flux and increases speed.
4) Tapped field and paralleling field controls change the motor's flux through different field coil configurations to vary speed.
5) The Ward Leonard control system uses an AC or DC motor to drive a generator coupled to the motor being controlled, allowing very smooth speed variation.
CV_Shahzad Ali protection engineer
This document contains the resume of Muhammad Shahzad Ali, a power protection engineer with over 8 years of experience in power protection and substation automation. It summarizes his work experience as a site manager and commissioning engineer on various substation projects in Saudi Arabia. It also lists the various electrical relays, software, commissioning activities and substations he has experience with.
ETAP - Load flow and panel rev2014-1
This document provides an overview of load flow analysis in ETAP software. It discusses load flow concepts such as determining steady state operating conditions, sizing equipment, and verifying operational limits. It also describes load flow requirements in ETAP like equipment data and models different load types commonly found in power systems. The document outlines how loads are modeled in ETAP, including constant power, constant impedance and lumped loads. It provides examples of calculating motor nameplate values from ratings and determining load values.
Unit iv conventional and solid state speed control of dc motors
This document discusses speed control methods for DC motors, including conventional and solid state control. It describes various speed control techniques for shunt motors and series motors such as flux control, armature voltage control, and the Ward-Leonard system. For solid state control, it covers phase-controlled rectifier drives and chopper drives. Phase-controlled rectifier drives can use single-phase or three-phase configurations while providing benefits like faster response and higher efficiency over conventional methods.
Control of dc drives
This document summarizes control of DC drives. It discusses types of DC motor configurations including series and separately excited motors. It describes single phase and three phase DC drives that use converters depending on the supply available. Chopper drives are discussed as a way to control DC motor speed by adjusting the duty cycle and switching frequency of the chopper output voltage. Phase locked loop control of DC drives is also mentioned as a way to precisely control motor speed by synchronizing the motor speed pulses to a reference frequency pulse train. Applications of DC drives include rolling mills, paper mills, printing presses, mine winders and machine tools.
Speed Control Of DC Motor
DC machines can achieve wide range speed control through three main methods - armature resistance control to vary speed below base speed, field flux control to vary speed above base speed, and armature voltage control using systems like Ward-Leonard which combine armature and field control to achieve the widest speed range from below to above base speed. Controlled rectifiers and series-parallel configurations are also used to vary armature voltage for smooth speed regulation.
Our company slide deck [KPA Power Solutions]
KPA Power & Agencies is an electrical equipment maintenance and installation company that is BBBEE Level 2 compliant. They offer services such as transformer maintenance, condition monitoring, preventative maintenance, transformer and switchgear installations and commissioning, refurbishment, and maintenance of transformers, switchgear, electrical panels, motors and pumps. Their services help clients preserve their current electrical infrastructure to improve future operations.
Speed control of dc motor conventional methods and solid state control
This document discusses various methods for controlling the speed of DC motors, including both conventional and solid state methods. Conventional methods include flux control, armature voltage control, and the Ward-Leonard system for shunt and series motors. Solid state speed control uses power semiconductor switches like SCRs, MOSFETs, and IGBTs. Phase-controlled rectifier drives and chopper drives are described as two types of solid state DC motor drives. Specific circuit configurations are provided for single and three-phase half and fully controlled rectifier drives. Applications and advantages/disadvantages of the different speed control methods are also summarized.
CV- Praveen Channe (15NOV 2015)
Praveen Channe has 19 years of experience in electrical engineering. He currently works as the Deputy General Manager of Electrical Reliability Management at Essar Steel India Ltd in Hazira, Surat. He oversees all electrical activities and maintenance across the company's plants. Channe has extensive experience developing and managing facilities for condition monitoring of transformers, motors, and other electrical equipment to improve reliability. He also leads initiatives in areas such as energy efficiency, safety training, and integrated management systems. Previously, Channe worked on electrical maintenance and troubleshooting of heavy machinery including cranes and substations.
ETAP - Transformer sizing using etap
This document discusses transformer sizing using ETAP software. It explains that ETAP takes into account factors like ambient temperature, altitude, cooling type and expected future growth to determine the proper transformer size. The document provides details on ETAP's 2-winding transformer sizing module, which calculates the rated MVA, maximum MVA and impedance based on loading, installation factors and short circuit requirements. It also discusses how ETAP can be used to check transformer regulation during motor starts. The document concludes that transformer sizing calculations can be standardized using ETAP due to the harmony between ETAP's sizing module and manual calculations using formulas.
CV OF TARIQ MEHMOOD
Tariq Mehmood is seeking a position as an Associate Electrical Engineer. He has over 11 years of experience working in grid station maintenance and protection for Gujranwala Electric Power Company and Saudi Electricity Company. He has extensive experience testing and maintaining transformers, circuit breakers, relays, meters, and other substation equipment. He is proficient in using various testing instruments and has participated in numerous trainings to expand his skills.
Baja Falcons Tuning and Instrumentation Team IGEN430 Poster - VR (1)
The document discusses the development of an onboard data acquisition system and continuously variable transmission (CVT) tuning instrument for the UBC Baja SAE team. The data acquisition system records information from six sensors to analyze vehicle performance and driver safety. It measures engine and wheel RPM, CVT belt temperature, gearbox oil temperature, 3-axis accelerations, and GPS coordinates. The CVT tuning instrument allows testing and analyzing CVT setups to operate at maximum engine power and shift behavior. It includes a flywheel, brake, throttle control, and data collection with Arduino and Matlab.
SOLID STATE AC DRIVES ,UNIT V,ME (PE&D),ANNAUNIVERSITY SYLLABUS
The document provides information about brushless excitation systems used for large synchronous generators. It describes the basic components of a brushless excitation system including a three-phase pilot exciter, three-phase main exciter, rotating rectifier wheels, cooling system, and metering/supervision systems. The pilot exciter produces DC excitation current, which is fed to the main exciter to produce a three-phase voltage that is rectified by the rotating rectifier wheels and supplied to the generator rotor winding.
Unit v conventional and solid state speed control of ac drives
This document discusses various methods for controlling the speed of AC induction motors, including stator-side control by varying voltage or frequency, and rotor-side control using cascade control, adding rotor resistance, or slip power recovery schemes. Stator-side control involves changing the stator voltage using autotransformers or resistors, or changing the frequency which varies the synchronous speed. Rotor-side control techniques include cascade control using two motors, adding external resistance in the rotor circuit, or recovering slip power using Kramer or Scherbius systems.
ETAP - Transformer mva sizing
This document discusses transformer sizing methods in ETAP software based on industry standards. It describes how ETAP considers factors like cooling type, altitude, temperature, load variation, and impedance requirements to calculate the required transformer MVA size. The sizing results section shows the required size along with the next standard larger and smaller sizes. The ratings are automatically updated when clicking buttons in the transformer rating page. The document also covers unit transformer sizing in ETAP to optimize tap settings considering voltage variation and auxiliary loads.
Mech2502 poster t3_g9
Instrumentation Project: Threshold Actuator
Application: Conveyor Belt systems, Garage door Automation and more.
Control_System_Lab.pdf
The document describes experiments to be performed in a control systems lab. It includes 10 experiments related to studying different components of control systems like AC and DC servo motors, magnetic amplifiers, lead-lag compensators, PID controllers, and MATLAB simulations. For each experiment, it provides the aim, apparatus required, theory, procedure, observations table and discussion. The experiments aim to analyze characteristics and behavior of components, plot graphs, and understand control system design principles.
Vector Speed Control of Induction motor
This ppt gives a small introduction to vector speed control of induction motor.
In my uploads another pdf is there which completely explains about vector control method
GO_POWER_catalogue_v1b
This document provides an overview and contact information for Go Power Systems, a manufacturer of dynamometers. It includes:
- Contact details for Go Power Systems global headquarters and regional representatives.
- Descriptions of the different types of dynamometers produced - powder, eddy current, and hydraulic dynamometers, along with their typical applications and specifications.
- Information on Go Power Systems' product catalog, which provides specifications and details on their individual dynamometer models.
- Additional services and accessories offered to support dynamometer installation and operation.
Tahir Mahmood Butt
This document provides a summary of Tahir Mahmood Butt's work experience and qualifications. It details that he has over 21 years of experience in the oil and gas industry, including 15 years working as a Senior Electrical Technician at Qatar Petroleum Refinery. It also lists his previous role as an Electrical Technician at Pakistan Petroleum Limited from 1994 to 2000. The document outlines his responsibilities and achievements in both roles, and provides information on his technical skills and qualifications.
Automatic speed control of DC motor
In this presentation, basic study of Control of DC motor , study of MATLAB/Simulink, Simulation of entitled project and problem associate with dc motor.
This presentation has been submitted to Mr.Anurag Agrawal and submitted by Munesh Singh, Anitya Shukla, Devendra Kumar and Aditya Vikram Singh in May 2012 to Kanpur institute of Technology,Kanpur India.
Ward leonard method of speed control
Ward Leonard Control, also known as the Ward Leonard Drive System, was a widely used DC motor speed control system introduced by Harry Ward Leonard in 1891. In early 1900s, the control system of Ward Leonard was adopted by the U.S. Navy and also used in passenger lift of large mines.
Unit iv field oriented control ,solid state ac drives,ME PE&D
This document provides an overview of vector control techniques for induction machines. It begins with an introduction to vector control and its advantages over scalar control. It then draws an analogy between vector control of induction machines and separately excited DC motor drives. The document covers direct and indirect methods of vector control, including details on the control strategies, equivalent circuits, and phasor diagrams. It also discusses direct torque and flux control as an advanced scalar control technique.
Unit iii ROTOR CONTROLLED AC DRIVES,ME PED,
This document discusses various rotor control techniques for induction motors, including:
1) Static rotor resistance control, which is simple but inefficient as slip power is wasted in rotor resistance.
2) Slip power recovery schemes like static Kramer and Scherbius drives that convert slip power to AC line power to improve efficiency.
3) Injection of voltage in the rotor circuit using a Schrage motor to produce an EMF that is injected at slip frequency to control speed.
The document provides details on operating principles, equivalent circuits, torque expressions, and power factor considerations for different rotor control induction motor drives.
Mohamed_Saad
Mohamed Saad is an electrical engineer from Egypt currently working as the Electrical Section Head at North Region Cement Company in Saudi Arabia. He has over 10 years of experience in electrical maintenance and project management roles in the cement industry. His responsibilities have included planning maintenance schedules, implementing energy savings initiatives, and overseeing automation and control systems. He is proficient in several automation software and control systems used in cement plants.
C18808 elc tech
S. Edwin is applying for the position of Electrical Technician. He has over 20 years of experience in electrical maintenance and commissioning in oil refineries and power plants in India and Kuwait. He holds a diploma in electrical engineering and has extensive training in safety, electrical systems, and maintenance. His responsibilities have included maintenance, troubleshooting, commissioning, and overseeing maintenance personnel.
More Related Content
What's hot
Control of dc drives
This document summarizes control of DC drives. It discusses types of DC motor configurations including series and separately excited motors. It describes single phase and three phase DC drives that use converters depending on the supply available. Chopper drives are discussed as a way to control DC motor speed by adjusting the duty cycle and switching frequency of the chopper output voltage. Phase locked loop control of DC drives is also mentioned as a way to precisely control motor speed by synchronizing the motor speed pulses to a reference frequency pulse train. Applications of DC drives include rolling mills, paper mills, printing presses, mine winders and machine tools.
Speed Control Of DC Motor
DC machines can achieve wide range speed control through three main methods - armature resistance control to vary speed below base speed, field flux control to vary speed above base speed, and armature voltage control using systems like Ward-Leonard which combine armature and field control to achieve the widest speed range from below to above base speed. Controlled rectifiers and series-parallel configurations are also used to vary armature voltage for smooth speed regulation.
Our company slide deck [KPA Power Solutions]
KPA Power & Agencies is an electrical equipment maintenance and installation company that is BBBEE Level 2 compliant. They offer services such as transformer maintenance, condition monitoring, preventative maintenance, transformer and switchgear installations and commissioning, refurbishment, and maintenance of transformers, switchgear, electrical panels, motors and pumps. Their services help clients preserve their current electrical infrastructure to improve future operations.
Speed control of dc motor conventional methods and solid state control
This document discusses various methods for controlling the speed of DC motors, including both conventional and solid state methods. Conventional methods include flux control, armature voltage control, and the Ward-Leonard system for shunt and series motors. Solid state speed control uses power semiconductor switches like SCRs, MOSFETs, and IGBTs. Phase-controlled rectifier drives and chopper drives are described as two types of solid state DC motor drives. Specific circuit configurations are provided for single and three-phase half and fully controlled rectifier drives. Applications and advantages/disadvantages of the different speed control methods are also summarized.
CV- Praveen Channe (15NOV 2015)
Praveen Channe has 19 years of experience in electrical engineering. He currently works as the Deputy General Manager of Electrical Reliability Management at Essar Steel India Ltd in Hazira, Surat. He oversees all electrical activities and maintenance across the company's plants. Channe has extensive experience developing and managing facilities for condition monitoring of transformers, motors, and other electrical equipment to improve reliability. He also leads initiatives in areas such as energy efficiency, safety training, and integrated management systems. Previously, Channe worked on electrical maintenance and troubleshooting of heavy machinery including cranes and substations.
ETAP - Transformer sizing using etap
This document discusses transformer sizing using ETAP software. It explains that ETAP takes into account factors like ambient temperature, altitude, cooling type and expected future growth to determine the proper transformer size. The document provides details on ETAP's 2-winding transformer sizing module, which calculates the rated MVA, maximum MVA and impedance based on loading, installation factors and short circuit requirements. It also discusses how ETAP can be used to check transformer regulation during motor starts. The document concludes that transformer sizing calculations can be standardized using ETAP due to the harmony between ETAP's sizing module and manual calculations using formulas.
CV OF TARIQ MEHMOOD
Tariq Mehmood is seeking a position as an Associate Electrical Engineer. He has over 11 years of experience working in grid station maintenance and protection for Gujranwala Electric Power Company and Saudi Electricity Company. He has extensive experience testing and maintaining transformers, circuit breakers, relays, meters, and other substation equipment. He is proficient in using various testing instruments and has participated in numerous trainings to expand his skills.
Baja Falcons Tuning and Instrumentation Team IGEN430 Poster - VR (1)
The document discusses the development of an onboard data acquisition system and continuously variable transmission (CVT) tuning instrument for the UBC Baja SAE team. The data acquisition system records information from six sensors to analyze vehicle performance and driver safety. It measures engine and wheel RPM, CVT belt temperature, gearbox oil temperature, 3-axis accelerations, and GPS coordinates. The CVT tuning instrument allows testing and analyzing CVT setups to operate at maximum engine power and shift behavior. It includes a flywheel, brake, throttle control, and data collection with Arduino and Matlab.
SOLID STATE AC DRIVES ,UNIT V,ME (PE&D),ANNAUNIVERSITY SYLLABUS
The document provides information about brushless excitation systems used for large synchronous generators. It describes the basic components of a brushless excitation system including a three-phase pilot exciter, three-phase main exciter, rotating rectifier wheels, cooling system, and metering/supervision systems. The pilot exciter produces DC excitation current, which is fed to the main exciter to produce a three-phase voltage that is rectified by the rotating rectifier wheels and supplied to the generator rotor winding.
Unit v conventional and solid state speed control of ac drives
This document discusses various methods for controlling the speed of AC induction motors, including stator-side control by varying voltage or frequency, and rotor-side control using cascade control, adding rotor resistance, or slip power recovery schemes. Stator-side control involves changing the stator voltage using autotransformers or resistors, or changing the frequency which varies the synchronous speed. Rotor-side control techniques include cascade control using two motors, adding external resistance in the rotor circuit, or recovering slip power using Kramer or Scherbius systems.
ETAP - Transformer mva sizing
This document discusses transformer sizing methods in ETAP software based on industry standards. It describes how ETAP considers factors like cooling type, altitude, temperature, load variation, and impedance requirements to calculate the required transformer MVA size. The sizing results section shows the required size along with the next standard larger and smaller sizes. The ratings are automatically updated when clicking buttons in the transformer rating page. The document also covers unit transformer sizing in ETAP to optimize tap settings considering voltage variation and auxiliary loads.
Mech2502 poster t3_g9
Instrumentation Project: Threshold Actuator
Application: Conveyor Belt systems, Garage door Automation and more.
Control_System_Lab.pdf
The document describes experiments to be performed in a control systems lab. It includes 10 experiments related to studying different components of control systems like AC and DC servo motors, magnetic amplifiers, lead-lag compensators, PID controllers, and MATLAB simulations. For each experiment, it provides the aim, apparatus required, theory, procedure, observations table and discussion. The experiments aim to analyze characteristics and behavior of components, plot graphs, and understand control system design principles.
Vector Speed Control of Induction motor
This ppt gives a small introduction to vector speed control of induction motor.
In my uploads another pdf is there which completely explains about vector control method
GO_POWER_catalogue_v1b
This document provides an overview and contact information for Go Power Systems, a manufacturer of dynamometers. It includes:
- Contact details for Go Power Systems global headquarters and regional representatives.
- Descriptions of the different types of dynamometers produced - powder, eddy current, and hydraulic dynamometers, along with their typical applications and specifications.
- Information on Go Power Systems' product catalog, which provides specifications and details on their individual dynamometer models.
- Additional services and accessories offered to support dynamometer installation and operation.
Tahir Mahmood Butt
This document provides a summary of Tahir Mahmood Butt's work experience and qualifications. It details that he has over 21 years of experience in the oil and gas industry, including 15 years working as a Senior Electrical Technician at Qatar Petroleum Refinery. It also lists his previous role as an Electrical Technician at Pakistan Petroleum Limited from 1994 to 2000. The document outlines his responsibilities and achievements in both roles, and provides information on his technical skills and qualifications.
Automatic speed control of DC motor
In this presentation, basic study of Control of DC motor , study of MATLAB/Simulink, Simulation of entitled project and problem associate with dc motor.
This presentation has been submitted to Mr.Anurag Agrawal and submitted by Munesh Singh, Anitya Shukla, Devendra Kumar and Aditya Vikram Singh in May 2012 to Kanpur institute of Technology,Kanpur India.
Ward leonard method of speed control
Ward Leonard Control, also known as the Ward Leonard Drive System, was a widely used DC motor speed control system introduced by Harry Ward Leonard in 1891. In early 1900s, the control system of Ward Leonard was adopted by the U.S. Navy and also used in passenger lift of large mines.
Unit iv field oriented control ,solid state ac drives,ME PE&D
This document provides an overview of vector control techniques for induction machines. It begins with an introduction to vector control and its advantages over scalar control. It then draws an analogy between vector control of induction machines and separately excited DC motor drives. The document covers direct and indirect methods of vector control, including details on the control strategies, equivalent circuits, and phasor diagrams. It also discusses direct torque and flux control as an advanced scalar control technique.
Unit iii ROTOR CONTROLLED AC DRIVES,ME PED,
This document discusses various rotor control techniques for induction motors, including:
1) Static rotor resistance control, which is simple but inefficient as slip power is wasted in rotor resistance.
2) Slip power recovery schemes like static Kramer and Scherbius drives that convert slip power to AC line power to improve efficiency.
3) Injection of voltage in the rotor circuit using a Schrage motor to produce an EMF that is injected at slip frequency to control speed.
The document provides details on operating principles, equivalent circuits, torque expressions, and power factor considerations for different rotor control induction motor drives.
What's hot (20)
Speed control of dc motor conventional methods and solid state control
Speed control of dc motor conventional methods and solid state control
Baja Falcons Tuning and Instrumentation Team IGEN430 Poster - VR (1)
Baja Falcons Tuning and Instrumentation Team IGEN430 Poster - VR (1)
SOLID STATE AC DRIVES ,UNIT V,ME (PE&D),ANNAUNIVERSITY SYLLABUS
SOLID STATE AC DRIVES ,UNIT V,ME (PE&D),ANNAUNIVERSITY SYLLABUS
Unit v conventional and solid state speed control of ac drives
Unit v conventional and solid state speed control of ac drives
Unit iv field oriented control ,solid state ac drives,ME PE&D
Unit iv field oriented control ,solid state ac drives,ME PE&D
Similar to Perwaja Steel Job Scop
Mohamed_Saad
Mohamed Saad is an electrical engineer from Egypt currently working as the Electrical Section Head at North Region Cement Company in Saudi Arabia. He has over 10 years of experience in electrical maintenance and project management roles in the cement industry. His responsibilities have included planning maintenance schedules, implementing energy savings initiatives, and overseeing automation and control systems. He is proficient in several automation software and control systems used in cement plants.
C18808 elc tech
S. Edwin is applying for the position of Electrical Technician. He has over 20 years of experience in electrical maintenance and commissioning in oil refineries and power plants in India and Kuwait. He holds a diploma in electrical engineering and has extensive training in safety, electrical systems, and maintenance. His responsibilities have included maintenance, troubleshooting, commissioning, and overseeing maintenance personnel.
ExxonMobil Job Scop
The document provides a job description for an Instrument & Electrical Technician position with ExxonMobil Exploration And Production (M) Inc. located at the Guntong Alpha platform. Key responsibilities include experience with e-permitting, lock out tag out procedures, fault finding, calibration, preventative maintenance, and ensuring smooth and cost-effective platform operations. Duties involve maintenance and testing of instrumentation, electrical systems, compressors, pumps, turbines, generators and HVAC systems.
bala.1
This document is a resume for Balasubramanian Sudalaiyandi applying for the position of Senior Electrical Technician. It outlines his 8 years of experience in electrical operation, commissioning, and maintenance in oil and gas plants. It details his responsibilities in previous roles including maintenance of switchgear, transformers, motors, and other electrical equipment. It also lists his employment history with 4 previous employers in the United Arab Emirates, Qatar, and Kuwait working on electrical maintenance and commissioning.
ELECHTRICAL COMMISSIONING TECHNICIAN 2201622
Mohammad Khalid Mustafa is applying for an electrical commissioning position in the oil and gas industry. He has 11 years of experience in electrical commissioning, installation, and maintenance in Gulf and India. His experience includes working with high, medium, and low voltage electrical equipment for various oil, gas, and petrochemical companies. He is proficient in testing, commissioning, and preventative maintenance of electrical systems and holds relevant technical qualifications.
Raju cv
This document is a curriculum vitae for an electrical engineer with over 21 years of experience in erection, testing, commissioning, operation, and maintenance of electrical systems for cement plants, power plants, and other industrial facilities. The engineer has a diploma and bachelor's degree in electrical engineering and various technical certificates. Contact information, areas of expertise, work history, educational background, and personal details are provided.
electrician
This document provides a summary of Mahesh Nai's qualifications and work experience. It outlines his educational background which includes a Diploma in Electrical Engineering. It then lists his various electrical licenses and certificates. The document describes Mahesh's work experience in commissioning electrical systems for gas projects, as a rig electrician, senior electrician, and other roles maintaining and repairing various electrical equipment. It provides details of the tasks and responsibilities in these roles.
Resume E&I Engineer
The document provides a summary of Muhammad Shahzad Akbar's work experience and qualifications. It details his over 3.5 years of experience in electrical engineering, including installation, commissioning, operation and maintenance of power generation equipment. It also lists his responsibilities managing electrical systems, instrumentation, utilities and staff at various power plants and airport facilities.
ELECHTRICAL TECHNICIAN RESUME (((((2016)))))
Mohammad Khalid Mustafa is applying for the position of Electrical Technician. He has over 15 years of experience as an electrical technician working on various oil and gas projects in countries like the UAE, Qatar, and Oman. He has experience commissioning electrical systems including switchboards, generators, motors, and more. His objective is to work for an organization where he can utilize his experience and further his career. He includes his educational and technical qualifications, passport and personal details to support his application.
bala.1
This document contains a resume for Balasubramanian Sudalaiyandi applying for the position of Electrical Technician. It summarizes his 8 years of experience in electrical maintenance, operation, and commissioning roles in oil, gas, and petrochemical plants in the UAE and Qatar. It details his responsibilities in roles with companies like Abudhabi Gas Development Company, Abudhabi Polymers Company, Qatar Shell GTL, Petrochemical Industries Company Kuwait, and British Gas India. It also lists his educational qualifications, computer skills, test equipment experience, and safety training courses.
RamCV1
S. Ramkumar has 17 years of experience managing electrical operations and maintenance as Chief Manager at a cement plant in South India. He holds a B.E. in Electrical and Electronics Engineering and certifications in energy management and auditing. Ramkumar oversees a staff and is responsible for project management, budgeting, maintenance, and energy conservation activities at the plant. He has led several electrical retrofitting projects and system implementations involving switchgear, motors, drives, and substations.
Jose_Transmission_Engineer
Royappan Joseph Jesu Raja is an electrical engineer with 19 years of experience in electrical installation, commissioning, maintenance, and troubleshooting. He has worked on offshore oil rigs and pipelines in Nigeria, India, Iraq, and Sudan. His experience includes high and low voltage systems, switchgears, transformers, motors, PLCs, SCADA, and DCS systems. He is proficient in English, Tamil, Hindi, and Arabic and seeks an opportunity to contribute his skills and experience to a progressive organization.
Vipin Resume
Vipindas K.M has over 5 years of experience in testing and commissioning electrical relays and equipment in oil and gas refineries and power plants. He holds a diploma in electrical engineering and has worked on projects in India, Tanzania, and Uganda commissioning equipment from manufacturers such as Areva, BHEL, Schneider, and EFACEC. He is proficient in testing and configuring numerical relays such as Micom, Sepam, and SEL and has completed several substation commissioning projects.
Jameel 25-Feb-16
Jameel Ahmed is an experienced electrical supervisor seeking a position in the oil and gas industry. He has over 20 years of experience in electrical maintenance and projects. Currently he works as an electrical foreman in Oman maintaining beam pumps and other equipment. Previously he has worked on automation and upgrade projects in Qatar and the UAE. He is competent in electrical craft, maintenance, troubleshooting, and implementing safety procedures.
Ashok Resume-2015
- Ashokkumar K has 7.5 years of experience in testing and commissioning substations up to 380KV in India and abroad. He has worked with companies such as TNEB, PDCS, and TECHSYS.
- Internationally, he has experience testing and commissioning projects in Saudi Arabia for ABB, including 110/13.8KV and 380/132/13.8KV substations. Domestically, he has experience with various state utilities and private companies.
- He is proficient in testing equipment such as Omicron CMC256 and relay configurations from manufacturers including ABB, Siemens, and Areva.
Byjul rahman cv (updated)
Byjul Rahman is an electrical engineer with over 11 years of experience in maintenance, testing, commissioning, and inspection of electrical equipment in gas plants and power sectors up to 220kV. He has extensive experience managing electrical maintenance and operations, testing protection relays, and commissioning substations. Some of his qualifications include a CompEX certification and experience testing ABB, GE, and Siemens protection systems using software like PCM600, Enervista, and Digsi.
Tamil E&I Compex inspector
I am working as a Electrical Commissioning Engineer / CompEx Inspector/QAQC Engineer for the 14 years Experience and happy to mention some of my achievements in this role
ETAP - Transformer sizing using etap
This document discusses transformer sizing using ETAP software. It explains that ETAP takes into account factors like ambient temperature, altitude, cooling type and expected future growth to determine the proper transformer size. The document provides details on ETAP's 2-winding transformer sizing module, which calculates the rated MVA, maximum MVA and impedance based on loading, installation factors and short circuit requirements. It also discusses how ETAP can be used to check transformer regulation during motor starts. The document concludes that transformer sizing calculations can be standardized using ETAP due to the harmony between ETAP's sizing module and manual calculations using formulas.
Lingeswaran CVe
Lingeswaran.P is an instrumentation and control engineer with over 8 years of experience in the power industry. He has expertise in commissioning, operating, and maintaining combined cycle power plants and their critical electrical and instrumentation systems. His resume provides details on his work experience with various power and industrial plants in India and Kuwait, highlighting his responsibilities in testing, commissioning, calibrating, and maintaining different types of field instruments and control systems.
Mohamed Saad Resume
This document provides a summary of an electrical engineer's qualifications. It lists the engineer's contact information, objective, personal details, and extensive work experience managing electrical systems and projects for cement plants in Egypt and Saudi Arabia over the past 13 years. The engineer has experience overseeing all electrical maintenance, commissioning large equipment, implementing automation systems, and energy optimization projects.
Similar to Perwaja Steel Job Scop (20)
Perwaja Steel Job Scop
- 1. Company : Perwaja Steel Sdn Bhd . :Direct Reduction Plant Position : Pm-Dr-E&I -Perform maintenance, monitoring, operations, apparatus repair (high/low voltage) Monitor by high voltage chargeman. -Turbine Generator Set 9.5MW/11kV -Diesel Emergency Generator Set 1.0MW/3.3kV -Transformer 33kV/11kV,11kV/3.3kV,3.3kV/415v -Switch Gear,VCB,VCS And ACB (Up To 33kV) -Electric Motors And Controls -Overhead Crane -Conveyor Switches -MCC (Motor Control Centre) -UPS System -Electrical Panel -Starter Panel -Lighting & Socket -Handling and switching in board (high/low voltage switch) (Up To 33kV) Monitor by high voltage chargeman - High and low voltage maintenance motor (11kV, 3.3kV, 415v and 240v) - Maintenance and makeover for battery charger system, aircraft warning light system and fire alarm. - Electrical transformer Maintenance - 20MVA, 33kV/11Kv - 12MVA, 11kV/3.3kV - 2.5MVA, 3.3kV/415v - 1.6MVA, 3.3kV/415v - 1.0MVA, 3.3kV/415v -Creating works to overhaul high/ low voltage motor and perform electric motor testing - Perform routine maintenance, corrective and preventive maintenance for electrical equipment maintenance over schedule.. Job Description of Resent ExperienceJob Description of Resent Experience
- 2. My Routine JobMy Routine Job -Install of single phase and three phase Electrical Motor-Install of single phase and three phase Electrical Motor -Control panel wiring.-Control panel wiring. -Maintenance and trouble shooting of AC & DC Motor.-Maintenance and trouble shooting of AC & DC Motor. -Maintenance for Overhead Crane.-Maintenance for Overhead Crane. -To plan and schedule maintenance item daily.-To plan and schedule maintenance item daily. -Prepare tomorrow schedule by liasing with planting department.-Prepare tomorrow schedule by liasing with planting department. -Prepare manpower for unexpected job/repair work.-Prepare manpower for unexpected job/repair work. -Prepare monthly shift schedule.-Prepare monthly shift schedule. -Report job done by artisen to the engineer and to put comment in the log book for informations.-Report job done by artisen to the engineer and to put comment in the log book for informations. -Maintenance for conveyor system.-Maintenance for conveyor system. -Follow up artisen’s (Job).-Follow up artisen’s (Job). Calibration system for ISO/IEC 17025 aboard sectors the following : -Mass -Length -Electrical -Pressure -Temperature Skill Calibration -Pressure transmitter -Temperature transmitter -Level temperature -Flow temperature Setting for switch -Pressure switch -Temperature switch -Flow switch -Level switch RELATED SKILLLS
- 3. Inspection & Remove For This Type Of Control Valve -Checking and troubleshooting -If found broken and remove -Service and test function -Install back device -Setting and calibration -Check leaking at packing,gasket,body and tubing Measure & source Using dokumen process communicator , jofra & Hart commuicator -Control valve -Temperature element -Miliampere transmitter -Creating works to overhaul high/ low voltage motor and perform electric motor testing - Perform routine maintenance, corrective and preventive maintenance for electrical equipment maintenance over schedule..