i am raju , i have surcharging in job for cement industries .

1. Curriculum Vitae
Electrical Middle Level (erection, testing, commissioning, operation, maintenances-(ETCOM)
E-mail id: ele.raju2003@gmail.com, vsraju05@ymail.com
Contact no: +91-8886385628, 7893891155
Skype id: balaji2988
What’s App: +91-7893891155
⊗ Summary:
− 21+years of solid experience in the Electrical in erection &Pre-Commissioning & commissioning/ operation &
maintenance, planning related to cement & power industry and process plants, hazardous areas viz. gas
plants etc.
− Both practical as well as theoretical knowledge of Different Electrical Instruments.
− Good understanding of Electrical Drawings, Planning of Projects, E&C AND O&M.
⊗ CORE STRENGTHS:
− Team oriented leadership Employed supervision
− Planning &Development Self-dedication
− Safety system Quality control
− Budgeting & scheduling Automated control system
− Operation Maintenance Diagnose /Troubles shoot problems
− Electrical maintenances support Power Generation / Distribution.
Effective time management Power saving & consumption
⊗ Planning& Responsibility:
− Hard work, quality work, quantity, defined job work, Equipments protection, power management, analysis,
Improved the equipment Efficacy, and systematic planning work, coordinate the other deportment etc.
− Projects (Greenfield/Brownfield) Erection & commissioning, testing and safety systems & protection systems
for motors & transformers etc. (Siemens-siprotec relays, micom, spam150c etc.).
− Knowledge with MIS system &Computerized Maintenance Management Systems (CMMS), Maintenance
programs, practices and procedures is essential.
− Working more efficiently and productively so that maxes. output comes
− Regular to checking and analyzing of organizations Electrical Load Consumption with Ratios and analysis.
− Planning & scheduling assignments to achieve pre-set goals within time parameters. Formulating long
term/short term strategic plans to enhance operations.
⊗ Educational & other additional information):
− Z P Higher Secondary School, I.Polavaram, 1988/1989 SSC 50%
− Industrial Training Institute (AKPH-I.T.I-NCVT), Ravulapalem 1989/1991 ELECTRICAL 70%
− Govt. Polytechnic (part time), GAYA 2002/2005 DEE 60%
− Karnataka state Open University, (part time), Mysore, 2011/2014 B.Tech- Electrical engineering.(60%)
− Certificate courses :
− ACS PLC Automation Training, PUNE, 2010 PLC,DCS,SCADA, VFD etc,
− Leadership training.
− SAP Training for PO Modules.
− Computer skills:
− Good knowledge of all Microsoft Office packages (windows 3, 7, 8, 10)
−
• 2015 to 2016 –ching yuan engineering & construction co ltd, Libya ,east Africa
Position: Electrical Engineer

2. • (From July 2010 to 2015)
− As an Electrical Engineer from M/s Jaypee balaji cement ltd (Jaypee group) at Jaggayyapet, India.
− (Project Capacity: 12000/tpd for single line KILN (FLS MAKE)
− VRM&MVR for RAW MILL, Cement mill: 450 /tph (GEBR.PFEIFFER INC, GERMANY)
− Ball Mill (FLS make): 180/tph,
− Roller Press (FLS make): 280/tph.
− Project CMD-75MW ,
− CPP CAPACITY -25+35 X 11 KV ,
− 132kv/ 6.6KV, 11KV switch yard. .
− Crusher (FLS make): 2000/tph,
− Starker/ Recliner : 2500/tph,
− Power Plant (SIEMENS –make): 35, 25 MW (CPP).
− Roto –Packers (EEL&FLS –make):110/tph,
− Wagon Loading (EEL&FLS-make):110/tph
− Two stage Pre-heater 180 feet.
− Preventive and productivity Maintenance of all electrical Equipments.
− Collecting Spares Details and making PR for Purchasing Order,
− Checking and Maintaining spares& prepared Budgeting of stores & spares,
− Analyzing power consumption.
− Compressor and plant utilities.
− EOT and Hoist Drives and controls.
− Plant Lighting and Central AC Systems.
− IT related job works.
− ISO documentation.
− Train up new Electricians and Assisting Shift Electricians.
• Erection ,testing ,commissioning ,operation/maintenances (ETCOM)
− Responsible for overseeing the construction supervision and inspection of erection, testing, pre commissioning &
commissioning.
− PCC, MCC and AUX Panels and cable terminations.
− Earth Pits of Sub-Station and Generator & AUX.
− Erection of AC, DC Motors & AC Drives.
− EHV /HV switch yards,
− Generators, transformers, HT &LT switch boards,
− HT & LT motors Erection, commissioning, testing etc.
− Wartsila engines –HFO firing (5000KVA)
− Skoda engines –diesel firing(3000KVA)
− Cummins engines –diesel firing(5000KVA)
− ABB-make AVR PANEL, SIEMENS-OCB, CG-make Alternators etc.
− Alfa Laval-separators, centrifugal, heat exchangers etc.
− Composer systems ,HFO heating heaters,
− Control /power load centers etc.
− HT &LT cable laying power and control.
− Battery, battery charger and emergency.

3. − DG sets, fire protection and detection systems, earthling, cable trays, lightings and lightening protections as per
drawings and standards of all electrical works.
− Switchgear & MCC’s including, circuit breaker and contractor setting & tripping check.
− Commissioning, installation and bus bar and push plates’ connection &Power and control cable termination works.
− Loop checking, Insulation resistance checking
− Circuit breaker & contactors setting Cable trays and trenches including.
− Grounding continuity, Cable identification and condition checking.
− Startup and operational defaults troubleshooting handling.
− Installation & leveling, Polarity of terminals & phase sequence, Power and control, tap setting etc.
− High potential testing, Verify circuit identification etc.
− Check seals, Glands, Inspect terminations. Fire alarm systems including.
− Installation and testing. Batteries & chargers including, confirm rating, Cable connections,
− Proper installation and testing.
− Check continuity Cable type & size, Testing. Motors including, Nameplate data prepared.
− Check bearings, oil levels, wiring, and Terminal connections.
− Witness uncoupled run-in, and confirm amperage load Temperatures.
− Should have Knowledge of Smart MCC (Siemens -Simcode) PLC, AC/DC Drives and other utility equipment.
− Operation and maintenances of LRS/GRR sisters.
− Supervising preventive and corrective maintenance work orders, assigning subordinates, liaising with other
operation and maintenance supervisors to coordinate work activities, endorsing work orders and work permits, and
supervising the actual execution of work on site and/or in workshop.
− Investigates and troubleshoots maintenance problems and implement the company’s permit to work procedures.
− Supervises all maintenance work carried out in the electrical workshop and ensures availability and operability of
all workshop machines and equipment.
− Also knowledge in planning, preparation of maintenance schedule & developing maintenance history of substation
equipments.
− Looking after budgeting, indenting, and contract closure, and statutory clearance, mobilization of resources at site,
vendor evaluation & development.
− Also responsible for technical evaluation of offers, drawing evaluation, modification & approval and responsible for
relevant capital improvement projects.
− Pre planning and scheduling the daily, weekly, monthly jobs and shut down jobs Activities. Listing & arrangement
of the spare parts, and spare regarding shut down activities.
− Good in Planning, Monitoring, Cost Control, Contracts Management, Material Control, etc.
− Responsible to minimize the breakdowns to the zero level.
− Responsible to increase the reliability of the equipment and make the equipment available for the production.
− Responsible for ensuring equipment is in good & safety condition.
− Responsible to maintain the all cables& panels in good condition.
− Should support the sub-ordinates and guide them in the work place.
− Responsible for the optimum utilization of the available resources and man power.
− Responsible for Energy conservation and optimal utilization of fuels.

4. − Responsible for implementation of the new automation as required by the management.
− Personal Effectiveness.
− Operation and maintenance of H T& L T Panels (VCB's & ACB's).
− Operation and maintenance of 33/11K V Transformers.
− Operation and maintenance of 11KV/440 V Transformers.
− Operation and maintenance of L T Motors & Starters.
− Operation and maintenance of Synchronizing Panels, Relay panels and Excitation panels.
− Operation and maintenance of E S P Transformers up to rating of 120KV, 300mA.
− Operation and Maintenance of AC drives ACS 800 (ABB) & Siemens Micro Master MM440
− Operation and Maintenance of MCC's and PCC's&6.6 KV Panels&6.6 KV HT Motors
− Operation and Maintenance of 132kv switch Yard&132 KV Switch Yard Panels.
− Operation and Maintenance of transformers up to rating of 2 MVA, 11KV/440V MAKE: ALSTOM.
− Operation and Maintenance of Indoor/out door vacuum circuit breakers up to rating of 2500 Amps at 6.6 KV/11KV
Rating.
− Operation and Maintenance of Air circuit breakers up to rating of 4000 Amps at 415 V Level.
− Operation and Maintenance of DC drives up to rating of 1100KW Motors, Make: ABB.(dcs800)
− Operation and Maintenance of UPS, Battery charges, and Battery Banks up to rating of 700AH.
• Languages known
− Languages Reading Writing Speaking
− English YES YES YES
− Telugu VERY GOOD VERY GOOD VERY GOOD
− Hindi NO NO YES
• Personal profile:
− Name : Bhupatiraju Venkat Satya narayana Raju
− Father’s name : Venkat Raju
− Date of birth : 12.05.1971
− Marital status : married
− Languages known : English, Hindi & Telugu.
− Expected Salary : Negotiable.
• Passport Detail:
− Passport No Z2944094.
− Date of Issue 11/07/2014
− Date of Expired 10/07/2024
− Place of Issue Vishakhapatnam.
• Declaration
− Professionalism in one’s work and to face the challenging environment and serve hooking forward to work in an
organization that is driven to excellence and promotes organization through hard work.
• PRASENT ADDERSESS
− B V S N RAJU,
− c/o Veda nageswararao,

5. − Door no: 6-6,
− Opp:HDFC BANK,
− Jaggayyapet-521175.
− Krishna dist,
− Andhra Pradesh-INDIA.
Venkat s.n.raju .Bhupatiraju

6. − Door no: 6-6,
− Opp:HDFC BANK,
− Jaggayyapet-521175.
− Krishna dist,
− Andhra Pradesh-INDIA.
Venkat s.n.raju .Bhupatiraju