Each offshore platform reaches the end of its lifetime at some point, and this necessitates decommissioning. This activity must be done safely, cost effectively and with as little environmental pollution as possible. While the life spans of these installations cover decades, they have not generally been designed with efficient decommissioning in mind. Moreover, the places where the facilities have been constructed are pivotal in defining the safest and most sustainable decommissioning method.
This 3 day training course will address the key issues surrounding an offshore decommissioning project. You will be exposed to key lessons learnt from Frigg, NW Hutton and Ekofisk, as well as lesson specifically derived from projects in based in Asia. The course will also assist in understanding the planning and decision analysis in decommissioning projects and costs involved.
Decommissioning of Offshore InstallationsMuanisa Waras
This training course will help your team improve your decommissioning strategies to reduce your offshore liabilities. Delegates will gain an in-depth understanding of the Asia Pacific market to prepare your company for decommissioning projects in the coming years. Your team will have an overview of the future challenges for the decommissioning market for operators and contractors and the strategies that need to be implemented to move projects forward. You will be able to formulate an effective and efficient decommissioning supply chain of experienced contractors to remove
offshore installations.
Challenges to Deepwater West Africa DevelopmentsDylan Roberts
@Richard Luff shares an overview on whats happening offshore West Africa – discusses common challenges and potential solutions operators can implement to avoid pitfalls. Hint, local content is key.
Preparing Trinidad and Tobago for Deepwater DevelopmentsDylan Roberts
An overview of the opportunities in the CARICOM region that is becoming an evolving basin. Discusses what options are there, timing and delivery, and how to prepare.
Decommissioning of Offshore InstallationsMuanisa Waras
This training course will help your team improve your decommissioning strategies to reduce your offshore liabilities. Delegates will gain an in-depth understanding of the Asia Pacific market to prepare your company for decommissioning projects in the coming years. Your team will have an overview of the future challenges for the decommissioning market for operators and contractors and the strategies that need to be implemented to move projects forward. You will be able to formulate an effective and efficient decommissioning supply chain of experienced contractors to remove
offshore installations.
Challenges to Deepwater West Africa DevelopmentsDylan Roberts
@Richard Luff shares an overview on whats happening offshore West Africa – discusses common challenges and potential solutions operators can implement to avoid pitfalls. Hint, local content is key.
Preparing Trinidad and Tobago for Deepwater DevelopmentsDylan Roberts
An overview of the opportunities in the CARICOM region that is becoming an evolving basin. Discusses what options are there, timing and delivery, and how to prepare.
Lng markets a canadian contactors perspective john j. jeffersJohn Jeffers
a Canadian contractors perspective of the Global LNG Markets December 2014
Delivered to a LNG Conference in Norway organised and sponsored by DNB & the Canadian Embassy
This presentation was given as part of the CCS Ready workshop which was held in association with the 6th Asia Clean Energy Forum (20 – 24 June, Manila)
The workshop discussed the range of measures and best practices that can be implemented to prompt the design, permitting and construction of CCS projects when designing or building a new fossil fuelled energy or industrial plant.
Alice Gibson’s presentation provided a summary of CCS Ready and the proposed definition as well as an explanation of the necessary regulatory and economic drivers required to implement CCS ready.
Lng markets a canadian contactors perspective john j. jeffersJohn Jeffers
a Canadian contractors perspective of the Global LNG Markets December 2014
Delivered to a LNG Conference in Norway organised and sponsored by DNB & the Canadian Embassy
This presentation was given as part of the CCS Ready workshop which was held in association with the 6th Asia Clean Energy Forum (20 – 24 June, Manila)
The workshop discussed the range of measures and best practices that can be implemented to prompt the design, permitting and construction of CCS projects when designing or building a new fossil fuelled energy or industrial plant.
Alice Gibson’s presentation provided a summary of CCS Ready and the proposed definition as well as an explanation of the necessary regulatory and economic drivers required to implement CCS ready.
GOM decom market reveiw and update mark kaiser, lsugomdecom
Presentation on the Gulf of Mexico Offshore Decommissioning Market delivered by Dr. Mark J. Kaiser at the 2nd Annual Decommissioning and Abandonement Summit, Gulf of Mexico
For more information on the decommissioning market go to www.decomworld.com
Decommissioning & Abandonment For Oil & Gasprada2000
Decommissioning & Abandonment for Oil & Gas Industry. This is a strategic Global Business Conference aimed at reducing the costs to decommission using latest technologies and strategies to limit the liabilities of Oil and Gas operators. It will give tools to deal with Legal disputes and environmental treaties.
The purpose of this PID was to present a feasible strategy for the commercialization of decommissioning by entering into the consortium and to provide a basis for assessing the overall success of the project.
Introduction to Floating Storage & Regasification Unit (FSRU)petroEDGE
Over the next 2 or 3 decades it is predicted that gas usage will grow at a much faster rate than oil and become the dominant energy source. Up to some 40% of gas comes from Offshore Fields. The transport of gas in the form of LNG is growing very fast – particularly for longer distance export routes. New offshore opportunities for gas production are being developed with the new technologies of Floating LNG (FLNG).
Inshore or Offshore FSRU’s provide safe, strategic and good location for the receiving terminals for LNG and provide the conversion of the methane from the liquid phase back to the gaseous phase to direct consumer usage.
This 2 day training course covers Gas and LNG activities – their Supply Chain from Onshore and Offshore Gas Fields to Market, with FSRU’s providing the last step by converting the LNG back to usable methane gas for local supply and use. Case Studies and videos will be used to illustrate lessons learned from past successful projects. A DVD of the powerpoint presentation and numerous Industry videos will be distributed with the lecture materials.
Topside processing systems features several different equipment that carry out distinct functions. These equipment are packaged into the modules which make up the whole topsides processing plants. It is the key that the equipment work safely and efficiently for which it was designed for and under a range of conditions including start-up and bad weather at the field location.
FPSO / Floating Production Technology for Offshore Oil & Gas ProductionWalter Lee
The aim of the course is to introduce interested parties to the technology of FPSOs and other Floating Production hosts, and illustrate their use as part of a full Field Development. The course includes many Field Development examples, including several of the most recent additions to the worldwide fleet.
A feature of the course is the incorporation and inclusion of a large number of videos and animations to support the slide presentations. This multimedia mix makes the course
appropriate to professional engineers seeking to extend their knowledge with the latest information; but also makes it accessible to “non-experts” who are seeking a general
overview of such activities.
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIESpetroEDGE
This 4 day (separately bookable) intensive training course will cover the details of drilling rigs and how they operate, especially for deepwater activities. Current drilling rigs are highly automated and efficient. These advances will be illustrated with animations and videos. The relationship between drilling and production will be explored with examples of current field developments
This program is a valuable, detailed insight into FSRU
technology and markets. It will benefit:
• National Utility Operators and Power Generation
Providers
• Oil & Gas Engineers
• Naval Architects, Design Engineers, Shipbuilders &
Shipyard Managers
• EPCs
• LNG Terminal & Vessel Operators
• LNG Technology and Equipment Providers
Course Description
The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regard to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain practices should either be employed or strictly avoided. The very latest in the use of forecasting methods, tools, techniques, and personal experiences will be presented.
By attending the 5 day training course, you will be able to:
Assess how rock will fail and how this analysis is used to determine the appropriate sand control method.
Interpret particle size distribution data.
Determine the appropriate sand control method when provided with appropriate reservoir and production data.
Select completion equipment and associated tooling for sand control (screens, gravels, work strings, barrier valves etc.)
Produce an outline installation procedure for the main types of sand control.
Troubleshoot sand control problems.
In our pursuit to discover oil and gas in ever deeper horizons, wells are often drilled in what is known as a High Pressure High Temperature [HPHT] environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi [69 MPa] and 300 deg F [150 deg C]. To drill these usually expensive wells successfully, the planning and execution phase has to be of an exceptionally high standard. Therefore, both operator and drilling/service contractor staff must be seamlessly aligned and work as a coherent team to reach and then harness the well objectives.
This course examines different deepwater depositional systems and considers how deepwater process, topography and sediment supply impact on these systems. The course examines analogue data from turbidite reservoirs and modern turbidite systems. Depositional settings and sequences associated with clastic deepwater systems are reviewed, along with the geological controls on reservoir quality and architecture. It also examines post-depositional process that can have a major impact on reservoir quality and architecture, and considers this within the context of the petroleum system.
API 570 Piping and Pipeline Inspectors Preparatory CoursepetroEDGE
This program is designed for in depth understanding of Inspection of piping and pipelines under operation and in-service as per API 570. This preparatory course will prepare inspectors to ensure piping and pipeline integrity in service. Practical aspect of design considerations, sizing, rating, piping and pipeline integrity, internal inspections, analysis, repair, pressure testing, and pipeline protection shall be discussed. The program shall also provide more information about types of piping system defects which may crop in during operation, repairs, maintenance and alteration. This will lead the participants to prepare them for ensuring good quality and safety of operating piping and pipelines so that they are safe in operations and ensure preventing any incident.
The oil & gas industry has had a volatile ride for the last decade. Oil prices have been fluctuating between $30 and $130/bbl and with Shale oil appearing as a serious competitor and LNG positioning itself more as the transitionary fuel of the future. Of course we never knew what we do not know but it seems to be getting more unclear what the future holds, especially for the oil & gas industry. Uncertainty seems to rule, and turbulence of our business environment seems to be reaching a new tipping point year after year, and the end of common strategic planning is in sight.
Distributed Control System (DCS) Applications, Selection & TroubleshootingpetroEDGE
Since the first Distributed Control System was installed in the late 1970’s, the concept of DCS has swept alternative control technologies from the field. The substantial growth, in the construction of plants in the traditional heavy process industries, such as power generation, refining, oil and gas, water and petrochemicals, is driving significant growth in the utilization of DCS. The broad architecture of a solution involves either a direct connection to physical equipment, such as switches, pumps and valves or connection via a fieldbus communication system.
This course will familiarize engineers, designers and construction personnel with the layout and design procedures and practices involved in the choice of piping systems and their associated supporting equipment. It will also address in detail, common pipeline components such as pumps, compressors and heat exchangers and will cover their mechanical performance and limitations in different piping arrangements. This course will give participants the background required to complete and successfully apply typical equipment layout and piping arrangements.
Advanced Heat Exchanger Design, Inspection and TroubleshootingpetroEDGE
The design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.
Liquid & Gas Flowmetering & Custody MeasurementpetroEDGE
This course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems and their associated supporting equipment. It will address these points in relation to both single- and multi-phase flows and will give guidance on the optimum commercially available flowmeters through a detailed comparison of their relative merits. Flowmeter calibration is crucial to these topics.
The course also covers the related issues of level and tank measurement as well as lease automatic custody transfer and truck custody transfer, leak detection, loss control and monitor and control production losses.
This intensive five-day course is designed to provide participants with a thorough knowledge of downhole sand exclusion equipment and the operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various types of sand control equipment, specific applications, the preparation and the final execution and installation of the equipment.
Webinar: Scenario planning for long term decision makingpetroEDGE
When developing a strategy or making investment decisions, there will be many uncertainties that need assessment. These can range from cost and timing issues to broader questions at the macro level, for example political, regulatory or social developments.
A way to get to grips with the latter category is by using ‘scenario analysis’, sometimes called ‘scenario thinking’ or ‘scenario planning’. A scenario in this context is an alternative future: a coherent narrative of a set of developments, trends and events that could unfold within some defined business environment.
A decision to drill an exploration well with the objective to find a new oil or gas field must be based on a sound assessment of the prospect’s risks and of the volumes: what is the chance that a well will find hydrocarbons, and how much could it be? Risk and volume assessments form the basis for decisions to drill a well or not, and as such it is the link between subsurface evaluation and the business aspects of the petroleum industry. This course explains how risks and volumes can be assessed in a realistic and pragmatic manner, based on a sound understanding of the geological details of the prospect as well as of its regional geological setting and our play understanding.
This intensive 2 x 2 week program has been put together to cover Advanced Well Engineering topics. The program intends to uplift the knowledge and skills for engineers, who are or will be directly involved in well and completion design. It will also benefit staff that are or will be working as a member of a day-to-day operations team.
The courses present advanced concepts of drilling and completion operations, plus post-completion enhancement (workovers). Participants will learn to visualize and troubleshoot what is happening downhole, discover what can be accomplished and optimized, and learn how drilling and completions can alter reservoir performance.
The Rig Safety Awareness course features ten e-learning modules, designed for new technical and petroleum engineers going offshore for the first time. The modules will require between 30 to 40 minutes study each.
Each module will also include assessment questions that relate to module’s content. Each e-learning module will be supported by four 2D ‘Walkthrough Events’ where the user is stepped through a series of safety failures that leed to an incident occurrence.
The main objective of this course is to acquire practical skills and tools on how to set up an asset depletion plan through a focused well and reservoir management approach. It is common in many asset teams to have an unclear picture of what future actions should be taken to the different wells and reservoirs as they deplete. In many cases, these actions are reactive rather than proactive. This is mainly due to a lack of a well-defined reservoir management and depletion plan or strategy.
This course presents you with the knowledge and tools to design a depletion plan. Such plan would be consistent with the increased understanding of the reservoir behavior obtained from focused reservoir management. The depletion plan is a comprehensive set of actions that the asset team designs to identify a way forward for every well by identifying future workovers, remedial work, gas lift methods, all the way to well abandonment. And for every reservoir by identifying underdeveloped areas, infill drilling targets, secondary recovery or IOR/EOR applications.
Major changes in 2020 for the global refining industrypetroEDGE
Refiners generally have incentives to upgrade their
refineries, by adding conversion units to produce greater
amounts of clean products (e.g., gasoline, diesel) and
lesser amounts of fuel oil. All else being equal, refiners
with conversion achieve higher margins than simple
refineries without conversion. However, it usually takes at
least four to five years from initial planning to actual startup
of a conversion project.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
1. OFFSHORE PLATFORM
DECOMMISSIONING
Your Expert Course Director
Thor Sterker
Thor Sterker has over 35 years of hand-on offshore engineering & project management
experience in drilling, offshore transport and installation work. Since 1990 he has been
specializing in decommissioning projects. In a client representative role, he has been involved in
the Gulf of Mexico, North Sea and South East Asia platform removal projects. Over the years he
specialized in ROV, diving and subsea cutting projects. As a consultant he has performed FEED
studies as well as PEER reviews of FPSO projects and participated in Environmental Impact
Assessments.
www.petroEDGEasia.net
2. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
OFFSHORE PLATFORM DECOMMISSIONING
Course overview
Each offshore platform reaches the end of its lifetime at some point, and this necessitates decommissioning. This activity
must be done safely, cost effectively and with as little environmental pollution as possible. While the life spans of these
installations cover decades, they have not generally been designed with efficient decommissioning in mind. Moreover,
the places where the facilities have been constructed are pivotal in defining the safest and most sustainable
decommissioning method.
This 3 day training course will address the key issues surrounding an offshore decommissioning project. You will be
exposed to key lessons learnt from Frigg, NW Hutton and Ekofisk, as well as lesson specifically derived from projects in
based in Asia. The course will also assist in understanding the planning and decision analysis in decommissioning projects
and costs involved.
By attending this training, participants will: -
* Review the standard supply chain and decommissioning plan
* Get to grips with the financial and organizational implication
* Evaluate the various methodologies for well P&A, platform removal, transport and onshore recycling
* Examine the environmental regimes for handling of hazardous waste
* Identify key risks, market situation and supply chain opportunities
* Learn how to other oil companies have executed recent projects
* Analyse key issues in planning a decommissioning project
* Understand implication of the decommissioning supply chain and Management of Change
* Compare best practice with colleagues from across global industry
Who should attend?
* Project managers and engineers
* Supply chain managers
* Finance & tax managers
* HSE managers
* Operational managers
* Well work-over specialists
About your Expert Trainer: Thor Sterker
After graduating as a mechanical engineer in 1977, Thor commenced his career in the oil & gas
industry as a mud logger data engineer for ultra-deep onshore wells in Europe. In 1979, he
joined, offshore construction company Heerema Marine Contractors as field engineer. As Field
Engineer he was involved in more than 65 offshore installation projects, and as Consultant /
Superintendant he was involved in almost every North Sea decommissioning project and
worldwide in more than 175 decommissioning projects.
Thor has over 35 years of hands-on offshore engineering & project management experience in
drilling, offshore transport and installation work. Since 1990 he has specialized in
decommissioning projects. In the early days of platform decommissioning he Researched & Developed innovative subsea
cutting tools, offshore installation and decommissioning techniques and platform decontamination methods. Since 2011,
as Technical Advisor to the Lenders (Mortgagee in Possession) he was involved in repossessing assets such as the
repossession of the Platform Etesco Millenium, FPSO OSX 2, and a Deep DP Drilling Vessel in Brazil.
In an effort to change the “mind set” about decommissioning he co-organized four International Conferences in
Aberdeen, Petten and Den Helder on the subject of “Decommissioning & Re-using of Platform Facilities” and presented
several papers on the subject of decommissioning, subsea cutting and re-use of platforms. In 1994 he took the initiative
to develop the platform re-use software (now called an App) and has participated in the development of the project
since that time. His HSE performance to date is: NO Lost Time Incidents on any project.
3. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
OFFSHORE PLATFORM DECOMMISSIONING
3 DAY COURSE OUTLINE
DAY ONE
Introduction and learning objectives
- Each attendant introduces
her/himself and indicates what
questions / issues she /he has and
would like to highlight during the
workshop
Decommissioning Roadmap,
Regulatory issues
- Geneva Convention on the
Continental shelf 1958
- IMO guidelines and Standards for the
removal of Offshore Platforms
- London Dumping Convention 1972
- OSPAR
- UN Convention on the Law of the Sea
1982 (UNCLOS)
- Decommissioning of Offshore
Installations and Pipelines under the
Petroleum Act
- ASCOPE decommissioning guidelines
/ DMF guidelines
- Who are the Competent Authorities
Reputational compliance and
management, Issues in worldwide
decommissioning
- Public Relations
- Health Safety and Environmental
Issues
- Consultation Public Interest Groups,
Government, Provincial and Local
Authorities,
- Navigational Safety
- Fisheries and other sub sea interests
- Pipeline abandonment
- Residual Liability
Funding
- Funds for decommissioning
- Accountants view towards
decommissioning
- IFRS 16 and FAS 143
Record management
- Waste and hazardous materials
survey
- Normally Unmanned Installation (NUI)
- Inventory equipment
- Original data, as-builds, weight
records, C.O.G.
Operators knowledge transfer.
Case studies from North Sea
- Petronas SM-4 and SM-V
- BPNE P15-b platform,
- Esmond Complex removal (video
film)
- BAES (UK) NSR platforms,
- Total (NO) Froy platform (Video
film)
- Conoco UK Inde platforms
- Gulf of Mexico (various)
Decommissioning risks and costs
(due to confidentiality limited to
public domain)
- Current marine equipment prices
- predicting "unknown"
decommissioning costs
- pipelines,
- drill cuttings,
- well abandonment
- Different categories of risks for
operators, contractors, suppliers
- Reduce risk and cost by smart
contracting
Day 1 wrap up
DAY TWO
Environmental considerations
- Definition of Waste
- Competent Authority
- Environmental act.
- Environmental Contract (based on
TFS guidelines)
- Platform disposal, sea or land
- Requirements for the Receiving
yard
Safety issues
- new techniques,
- FDDV concept
- Using ROV or Divers to prepare
jackets for lifting
- underwater cutting techniques
- Lessons learned
Decommissioning techniques –
pro´s and con´s
- Semi Submergible Crane vessels
- Mono hull Crane vessels,
- Shear legs,
- Lift Barges
- DSV´s
- Piece small
Opportunities in decommissioning
- Alternative use of facilities in situ
- Re-use at other location
- Recycling opportunities.
- Carbon capture & storage
- Re-use of infrastructure
- Contracting
- Economy of Scale
- Flexible planning
- Contractor terms and conditions
versus Operator terms and
conditions
Day 2 wrap up
DAY THREE
Summarize Day 1 and Day 2, Each attendant
writes up which issues she he would like
further clarified.
Perform a Decommissioning Cost and
Planning exercise for a 4 leg, Riser / wellhead
platform in 30 to 50 meter water depth,
commonly found in Asia (by attendants in
small groups)
Each group presents their findings
Group discussion on above
- Write up discussion notes which will
be distributed within the group
- Decommissioning cost estimate
- What has been learned,
- How to kick start decommissioning,
- How to optimize re-use.
- How to optimize re-use of
components, jacket tubular vs
scrapping
- What is the way forward w.r.t.
funding
- What technical topics requires
further study
- What Environmental issues require
further study
- What would be needed from the
Authorities, Oil Co’s, Service Industry
- What type of contract should be used
- Identify which issues may be put
forward as Joint Industry Project.
4. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
OFFSHORE PLATFORM DECOMMISSIONING
DELEGATE DETAILS
Delegate 1 Please note
- Indicate if you have already registered by Phone
+Fax +Email +Web
- If you have not received an acknowledgement
before the training course, please call us to confirm
your booking.
- Photocopy this form to register multiple delegates.
PAYMENT METHODS
By Cheque/ Bank Draft
Make Payable to Asia Edge Pte. Ltd.
By Direct Transfer
Please quote your invoice number with the remittance
advise
Account Name: Asia Edge Pte. Ltd.
Bank Number: 508 Account Number: 762903-001 Swift
Code: OCBCSGSG
All bank charges to be borne by payer. Please ensure
that Asia Edge Pte Ltd receives the full invoiced
amount.
PAYMENT POLICY
Payment is due in full at the time of registration. Full
payment is mandatory for event attendance. By
submitting this registration form, you have agreed to
Asia Edge Pte Ltd’s payment terms
CANCELLATIONS & SUBSTITUTIONS
You may substitute delegates at any time. For
cancellations received in writing more than seven (7)
days prior to the training course, delegates will receive
a 100% credit on the amount paid which can be used in
another Asia Edge Pte. Ltd. training course for up to
one year from the date of issuance. The credit is
transferable to other persons in the same company and
applicable against any future Asia Edge Pte. Ltd. public
course. For cancellations received seven (7) days or less
prior to an event (including day 7), no credit will be
issued. In addition, a cancellation fee equivalent to 15%
of the course fee will be charged. In the event that Asia
Edge Pte. Ltd. postpones or cancels a course, delegate
payments at the date of cancellation or postponement
will be credited to a future Asia Edge Pte. Ltd. course.
This credit will be available for up to one year from the
date of issuance, and it is transferable to other persons
in the same company and applicable against any future
Asia Edge Pte. Ltd. public course. Asia Edge Pte. Ltd.
does not provide refunds for cancellations and
postponements or waive fees for unpaid invoices upon
receipt of registration.
PROGRAM CHANGE POLICY
Please note that speakers and topics were confirmed at
the time of publishing; however, circumstances beyond
the control of the organizers may necessitate
substitutions, alterations or cancellations of the
speakers and/or topics. As such, ASIA EDGE PTE LTD
reserves the right to alter or modify the advertised
speakers and/or topics if necessary. Any substitutions
or alterations will be updated on our web page as soon
as possible.
This brochure may not be copied, photocopied,
reproduced, translated, or converted to any electronic
or machine-readable form in whole or in part without
prior written approval of ASIA EDGE PTE LTD
ASIA EDGE PTE. LTD.
Company Registration No: No. 200710561C
Copyright@ 2005 ASIA EDGE PTE LTD. All rights
reserved.
Mr Ms Mrs Dr Others:
Name :
Job Title :
Department :
Telephone
No.
:
Email :
Delegate 2
Mr Ms Mrs Dr Others:
Name :
Job Title :
Department :
Telephone
No.
:
Email :
Company :
Address :
Country : Postcode:
Attention
Invoice to
:
Telephone
No.
:
Fax No. :
4 EASY WAYS TO REGISTER
Online: www.petroedgeasia.net
Email: info@asiaedge.net
Phone: +65 6741 9927
Fax: +65 6747 8737
OFFSHORE PLATFORM DECOMMISSIONING
R E G I S T R A T I O N F O R M