Redistribution between ospf and rip

1. Redistribution into OSPF
1) Configure terminal R1,R2,R3,R4,R5.
-SLOTS
-PROVIDE IP ADDRESS
-NO SHUTDOWN

3. Now R1 should be EIGRP neighbor with R3 and R4, also R1 with R2 should be OSPF neighbors.
Further I will add redistribution commands on R1 to import routes in OSPF domain. Routes
learned from EIGRP domain 1 will be marked with E1, from EIGRP domain 2 will be marked with
E2.
AA
Keyword subnet is important because without it OSPF will make redistribution of only classful
subnets.
put on R3 and R4 default routes to point all unknown traffic to R1. In next pictures see output
of “show ip route” on R2 and ping from R2 to R3 loopback interface.

4. Imported Routes after redistribution into OSPF
As you can see in the picture above redistribution has worked.