This document provides information about linear shaft motors from Oriental Motor. It describes linear shaft motors as brushless linear motors that provide high precision linear motion. It discusses their advantages over other linear motion systems, including high efficiency and output. It also outlines Oriental Motor's linear shaft motor product lineup and specifications, applications, and selection guidelines.
Applied Motion Products stm integrated motor product presentation march 2009Electromate
www.electromate.com
The document provides an overview of the STM23 Series stepper motors from Applied Motion Products. It describes that the STM23 has drive electronics mounted directly onto the motor housing, making it a self-contained unit. It then summarizes the various options and part numbering system for the STM23 motors, including frame sizes, control types, stack lengths, communication ports, encoders, and input/output capabilities. The document is intended to educate distributors on the STM23 product line.
Ibex medical nano technology presentation may 2009Electromate
The document discusses Ibex's capabilities for designing precision motion control systems. It provides an overview of Ibex's history and markets served. It then describes the engineering process for designing high precision systems, focusing on factors like accuracy, repeatability, structural stiffness, feedback, and controlling natural frequencies. A variety of positioning stage technologies and configurations are also presented.
Tolomatic presentation understanding the application processElectromate
The document discusses factors to consider when selecting an electric actuator system, including load characteristics, maximum speed, stroke length, moment loads, acceleration/deceleration, actuator and carrier positioning, environmental conditions, and precision requirements. It provides examples of common automation applications that use electric actuators and describes different actuator styles for moving and carrying various types and weights of loads. Rodless and rod-style actuators are compared, and load capacity charts list the maximum loads for different rodless actuator models.
The document discusses Electromate's launch of the new MXB-U belt drive product. It provides an overview of belt drive technology and applications, compares the features of the MXB-U to other Electromate belt drive products, and describes the MXB-U's options, sizing software tools, and potential applications. The presentation aims to promote the MXB-U as part of Electromate's wide range of actuator solutions.
Haydon Kerk basic product training 2009.Electromate
Stepper motors are useful for positioning applications because they move a set amount of rotation for each input pulse. Can-stack motors move 7.5 or 15 degrees per pulse, while hybrid motors move 0.9 or 1.8 degrees per pulse. This precise stepping motion allows stepper motors to accurately control position.
Ibex engineering high precision linear motion made easy presentation 2009Electromate
The document discusses considerations for designing sub-micron positioning systems. It covers evaluating specifications, choosing appropriate mechanical components like bearings and screws, and factors that impact accuracy like thermal expansion and feedback methods. The goal is to understand all factors that influence precision so the optimal design can be selected for the target application.
Kollmorgen benefits of direct drive technologyElectromate
Direct drive technology provides three main benefits over traditional mechanical transmission systems: 1) It eliminates compliance between the motor and load, allowing for precise motion control; 2) It is not affected by inertia mismatches between the motor and load; and 3) It has been successfully used in applications with up to 1000:1 inertia mismatches, compared to 10:1 for standard servo systems. Direct drive uses the motor to directly couple and move the load without any gearboxes, belts, or other mechanical interfaces.
The document discusses Robo Cylinder, a new generation cylinder that uses air substitution. It has integrated electric motor and controller components. The cylinder can perform 7 functions including multi-positioning with 0.02mm repeatability, pausing at positions, and variable speed control. Examples are given of applications in welding fixtures, part transfer machines, and inspection systems where the cylinder's precise positioning and pausing abilities provide benefits over traditional air cylinders.
Applied Motion Products stm integrated motor product presentation march 2009Electromate
www.electromate.com
The document provides an overview of the STM23 Series stepper motors from Applied Motion Products. It describes that the STM23 has drive electronics mounted directly onto the motor housing, making it a self-contained unit. It then summarizes the various options and part numbering system for the STM23 motors, including frame sizes, control types, stack lengths, communication ports, encoders, and input/output capabilities. The document is intended to educate distributors on the STM23 product line.
Ibex medical nano technology presentation may 2009Electromate
The document discusses Ibex's capabilities for designing precision motion control systems. It provides an overview of Ibex's history and markets served. It then describes the engineering process for designing high precision systems, focusing on factors like accuracy, repeatability, structural stiffness, feedback, and controlling natural frequencies. A variety of positioning stage technologies and configurations are also presented.
Tolomatic presentation understanding the application processElectromate
The document discusses factors to consider when selecting an electric actuator system, including load characteristics, maximum speed, stroke length, moment loads, acceleration/deceleration, actuator and carrier positioning, environmental conditions, and precision requirements. It provides examples of common automation applications that use electric actuators and describes different actuator styles for moving and carrying various types and weights of loads. Rodless and rod-style actuators are compared, and load capacity charts list the maximum loads for different rodless actuator models.
The document discusses Electromate's launch of the new MXB-U belt drive product. It provides an overview of belt drive technology and applications, compares the features of the MXB-U to other Electromate belt drive products, and describes the MXB-U's options, sizing software tools, and potential applications. The presentation aims to promote the MXB-U as part of Electromate's wide range of actuator solutions.
Haydon Kerk basic product training 2009.Electromate
Stepper motors are useful for positioning applications because they move a set amount of rotation for each input pulse. Can-stack motors move 7.5 or 15 degrees per pulse, while hybrid motors move 0.9 or 1.8 degrees per pulse. This precise stepping motion allows stepper motors to accurately control position.
Ibex engineering high precision linear motion made easy presentation 2009Electromate
The document discusses considerations for designing sub-micron positioning systems. It covers evaluating specifications, choosing appropriate mechanical components like bearings and screws, and factors that impact accuracy like thermal expansion and feedback methods. The goal is to understand all factors that influence precision so the optimal design can be selected for the target application.
Kollmorgen benefits of direct drive technologyElectromate
Direct drive technology provides three main benefits over traditional mechanical transmission systems: 1) It eliminates compliance between the motor and load, allowing for precise motion control; 2) It is not affected by inertia mismatches between the motor and load; and 3) It has been successfully used in applications with up to 1000:1 inertia mismatches, compared to 10:1 for standard servo systems. Direct drive uses the motor to directly couple and move the load without any gearboxes, belts, or other mechanical interfaces.
The document discusses Robo Cylinder, a new generation cylinder that uses air substitution. It has integrated electric motor and controller components. The cylinder can perform 7 functions including multi-positioning with 0.02mm repeatability, pausing at positions, and variable speed control. Examples are given of applications in welding fixtures, part transfer machines, and inspection systems where the cylinder's precise positioning and pausing abilities provide benefits over traditional air cylinders.
This document discusses gearbox and coupling solutions from GAM that can improve machine performance while reducing costs. It describes several gearbox and coupling product lines - including the Dyna, JPG, and Linear Mount series - and highlights benefits like fewer components, higher torque and speed capabilities, precision, and integrated output coupling options. The document encourages contacting Electromate for customized solutions.
The document describes the BLu Servo Amplifiers manufactured by Electromate. The amplifiers can operate servo motors in position, velocity or torque modes. They include features like analog and digital I/O, encoder support, and programming software. Electromate sells and services the amplifiers.
Applied Motion Products stm23 presentation july 2008Electromate
The STM drive+motor unit combines a step motor and drive into a single device. It offers savings on space, wiring and cost over separate motor and drive solutions. The STM provides dynamic current control, anti-resonance, torque ripple smoothing and command signal smoothing. An optional integrated encoder adds stall detection, prevention and position maintenance without increasing size. The STM is available in multiple communication, control and programming models for stand-alone, host-controlled and multi-axis applications.
This document provides an overview and specifications for Electromate's new MXB-series belt-driven actuators. The MXB series extends Electromate's MX product line with sizes from 16 to 63 and various configuration options. Key features are highlighted, including common components with MX actuators. Pre-production testing is underway to evaluate performance of the new sizes under different load and speed conditions.
Galil new product presentation april 2008Electromate
Galil introduces new high performance and cost-effective PLC and motion control products. The new Accelera line features increased processing power and memory over prior models. Key features include ultra high speed command execution, support for encoders up to 22 MHz, and compact controller packages with optional integrated drives. The document provides details on Galil's product portfolio and online support resources.
The document introduces the MXB product line of actuators from Electromate. It provides details on the features, options, specifications, and comparisons to other actuators. Key information includes sizes ranging from 16mm to 63mm, IP protection ratings, load and moment capabilities, reduction drive options, and how to order an MXB actuator.
Gam Gear new product presentation feb. 2007Electromate
This document provides information on gearbox products sold and serviced by Electromate. It includes an overview of Electromate's GAM (Gearbox and Motor) product line, which consists of precision planetary and right angle gearboxes in various output configurations and performance levels. Contact information is provided for Electromate along with product specifications, features, and summaries of individual gearbox series including the JPG, Dyna, SPL, FP, DL, HPS, and EPL series.
The document discusses updates from Galil Motion Control presented at the Electromate Automation Fair 2006. It introduces Galil products and new features, including the DMC-18x6 Accelera PCI motion controller and new firmware features. It also discusses the CDS-3310 1-axis controller and drive unit and the DMC-21x3 Controller n' Drive solution.
Tolomatic presentation understanding motion control technologyElectromate
This document discusses different types of motion control technology including microstepping systems, brushed DC systems, and brushless servo systems. It focuses on encoder feedback, describing open loop and closed loop systems. It also covers feedback devices, stepper motors, and compares the advantages and limitations of stepper motor systems.
This document discusses Q Basics, a programmable drive controller from Electromate. Q allows for more complex motion control applications than Si drives. It can perform all Si functions plus multi-tasking, internal data manipulation, analog inputs, robust encoder following, and communication with external devices. Q is programmed with Q Programmer software while Si uses Si Programmer software. Q is important for Electromate as it addresses new applications and customers, works with servo and stepper products, and provides more machine control functions. Current Q-enabled drives include STAC6-Q, BLuDC4-Q, BLuDC9-Q, and BLuAC5-Q targeting industries like packaging, medical, and
The document discusses Kerk lead screw assemblies and linear motion products. It summarizes that Kerk develops proprietary lead screw and nut designs using precision thread rolling and custom plastic formulations. Key technologies include thread rolling, nut injection molding, and customization of lead screw assemblies for linear motion applications.
The webinar covered AMC's new single phase, DZ, and AZ product expansions. For single phase, 12 new DP drives were introduced with single phase input. The DZ expansion increased power ranges up to 60A and added extended temperature models. The AZ expansion added high voltage models up to 175V with currents from 6A to 25A. New mounting cards were also discussed.
Intelligent Actuator robo expo nov 2009Electromate
The document introduces IAI's next generation of cylinder products, including their Mini and Micro ROBO cylinders. It provides an overview of IAI worldwide, details about their new factory addition in Japan, and market share data. The document then describes IAI's product lines of ROBO cylinders, single-axis robots, SCARA robots, controllers, software, multi-axis systems, and their latest mini ROBO cylinders. Applications and specifications are provided for many of the products.
Applied Motion Products Product Overview presentation june 2009Electromate
The document discusses Applied Motion Products, Inc. and provides an overview of their stepper motor and drive products. It describes how stepper motors inherently have a resonance problem due to the rotor behaving like a mass on a spring. When the motor takes a step, the rotor settles into position after each step, but this settling can last over a second and cause rough motion or loss of torque and position if not addressed. Applied Motion drives aim to improve smoothness and accuracy by eliminating resonance and adding closed-loop control with encoder feedback.
The document discusses enhancing the power of Galil motion controllers by adding Exor UniOP HMIs. The UniOP HMIs can expand I/O, add PLC logic, connect to over 175 drivers through a built-in gateway, enable data acquisition via UniNET and OPC server, and offer modular configurations and communication options. They allow connecting Galil controllers to other controllers for intelligent communications and sharing information.
GAM was founded in 1990 and brought the Jakob coupling to North America. It has since grown to have 25% of the market share for bellows couplings and launched its first in-house gear product in 2004. The company produces a wide range of gearboxes, couplings, and customized engineered solutions for motion control applications.
The document discusses a new generation of cylinder called the Robo Cylinder produced by IAI. Key details include:
- IAI is a fast growing private company in Japan that produces industrial robots and cylinders.
- The Robo Cylinder uses an integrated electric motor and controller to perform 7 functions including multi-positioning, speed control, and more flexibility than traditional air cylinders.
- IAI has expanded with a new factory completed in 2004 to increase production of its robotic products.
Hd Systems LLC actively marketed products 2006Electromate
The document describes various gear component sets and gearheads sold and serviced by Electromate, including CSF, CSG "Quantum", CSD "Ultra Flat", SHF "Silk Hat", SHG "Silk Hat Quantum", HDUF "Pancake", HDUR "Pancake", HDT "T cup", HDB phasing gear set, HDI "Infinit-Indexer", and CSF-2UH gearhead. It provides information on sizes, ratios, torque and life specifications for each product.
This document provides information about Electromate, a company that sells and services automation controllers and software. It summarizes the key features of Electromate's new RCP2 and ERC controllers, including their I/O configurations, connections for linking multiple units, and new RC software features like a tree view navigation and error code monitoring.
Tolomatic ICR Smart Actuator Product Presentation may 2009Electromate
The document introduces the ICR SmartActuator series from Electromate. It includes the ICR Basic and ICR Plus models, which are integrated servo motor, drive, and controller units. The ICR Basic provides plug-and-play operation for basic two-position motion, while the ICR Plus allows for more advanced programming and network communication options. Both models offer compact, durable designs suitable for industrial automation applications.
Haydon Kerk motion systems linear motion presentation 2010Electromate
This document discusses linear systems that use leadscrews and nuts to provide precise linear positioning. It describes how leadscrews work using the mechanical advantage of an inclined plane to convert rotational motion to linear motion. It discusses key characteristics of leadscrews like diameter, lead, and pitch. It also discusses how rolling is used to manufacture leadscrews, providing benefits like increased accuracy and low friction. The document addresses how clearances between leadscrews and nuts can cause backlash, and describes different methods like gravity bias, springs, and elastic rings that are used to eliminate backlash.
Galil medical nano presentation may 2009Electromate
This document discusses Galil Motion Controllers and provides information about Galil as a company, their support resources, controller features, and programming capabilities. Specifically, it outlines that Galil has been in business since 1983, provides worldwide technical support, and that their motion controllers can handle various motion types at high speeds with intelligent on-board programming.
This document discusses gearbox and coupling solutions from GAM that can improve machine performance while reducing costs. It describes several gearbox and coupling product lines - including the Dyna, JPG, and Linear Mount series - and highlights benefits like fewer components, higher torque and speed capabilities, precision, and integrated output coupling options. The document encourages contacting Electromate for customized solutions.
The document describes the BLu Servo Amplifiers manufactured by Electromate. The amplifiers can operate servo motors in position, velocity or torque modes. They include features like analog and digital I/O, encoder support, and programming software. Electromate sells and services the amplifiers.
Applied Motion Products stm23 presentation july 2008Electromate
The STM drive+motor unit combines a step motor and drive into a single device. It offers savings on space, wiring and cost over separate motor and drive solutions. The STM provides dynamic current control, anti-resonance, torque ripple smoothing and command signal smoothing. An optional integrated encoder adds stall detection, prevention and position maintenance without increasing size. The STM is available in multiple communication, control and programming models for stand-alone, host-controlled and multi-axis applications.
This document provides an overview and specifications for Electromate's new MXB-series belt-driven actuators. The MXB series extends Electromate's MX product line with sizes from 16 to 63 and various configuration options. Key features are highlighted, including common components with MX actuators. Pre-production testing is underway to evaluate performance of the new sizes under different load and speed conditions.
Galil new product presentation april 2008Electromate
Galil introduces new high performance and cost-effective PLC and motion control products. The new Accelera line features increased processing power and memory over prior models. Key features include ultra high speed command execution, support for encoders up to 22 MHz, and compact controller packages with optional integrated drives. The document provides details on Galil's product portfolio and online support resources.
The document introduces the MXB product line of actuators from Electromate. It provides details on the features, options, specifications, and comparisons to other actuators. Key information includes sizes ranging from 16mm to 63mm, IP protection ratings, load and moment capabilities, reduction drive options, and how to order an MXB actuator.
Gam Gear new product presentation feb. 2007Electromate
This document provides information on gearbox products sold and serviced by Electromate. It includes an overview of Electromate's GAM (Gearbox and Motor) product line, which consists of precision planetary and right angle gearboxes in various output configurations and performance levels. Contact information is provided for Electromate along with product specifications, features, and summaries of individual gearbox series including the JPG, Dyna, SPL, FP, DL, HPS, and EPL series.
The document discusses updates from Galil Motion Control presented at the Electromate Automation Fair 2006. It introduces Galil products and new features, including the DMC-18x6 Accelera PCI motion controller and new firmware features. It also discusses the CDS-3310 1-axis controller and drive unit and the DMC-21x3 Controller n' Drive solution.
Tolomatic presentation understanding motion control technologyElectromate
This document discusses different types of motion control technology including microstepping systems, brushed DC systems, and brushless servo systems. It focuses on encoder feedback, describing open loop and closed loop systems. It also covers feedback devices, stepper motors, and compares the advantages and limitations of stepper motor systems.
This document discusses Q Basics, a programmable drive controller from Electromate. Q allows for more complex motion control applications than Si drives. It can perform all Si functions plus multi-tasking, internal data manipulation, analog inputs, robust encoder following, and communication with external devices. Q is programmed with Q Programmer software while Si uses Si Programmer software. Q is important for Electromate as it addresses new applications and customers, works with servo and stepper products, and provides more machine control functions. Current Q-enabled drives include STAC6-Q, BLuDC4-Q, BLuDC9-Q, and BLuAC5-Q targeting industries like packaging, medical, and
The document discusses Kerk lead screw assemblies and linear motion products. It summarizes that Kerk develops proprietary lead screw and nut designs using precision thread rolling and custom plastic formulations. Key technologies include thread rolling, nut injection molding, and customization of lead screw assemblies for linear motion applications.
The webinar covered AMC's new single phase, DZ, and AZ product expansions. For single phase, 12 new DP drives were introduced with single phase input. The DZ expansion increased power ranges up to 60A and added extended temperature models. The AZ expansion added high voltage models up to 175V with currents from 6A to 25A. New mounting cards were also discussed.
Intelligent Actuator robo expo nov 2009Electromate
The document introduces IAI's next generation of cylinder products, including their Mini and Micro ROBO cylinders. It provides an overview of IAI worldwide, details about their new factory addition in Japan, and market share data. The document then describes IAI's product lines of ROBO cylinders, single-axis robots, SCARA robots, controllers, software, multi-axis systems, and their latest mini ROBO cylinders. Applications and specifications are provided for many of the products.
Applied Motion Products Product Overview presentation june 2009Electromate
The document discusses Applied Motion Products, Inc. and provides an overview of their stepper motor and drive products. It describes how stepper motors inherently have a resonance problem due to the rotor behaving like a mass on a spring. When the motor takes a step, the rotor settles into position after each step, but this settling can last over a second and cause rough motion or loss of torque and position if not addressed. Applied Motion drives aim to improve smoothness and accuracy by eliminating resonance and adding closed-loop control with encoder feedback.
The document discusses enhancing the power of Galil motion controllers by adding Exor UniOP HMIs. The UniOP HMIs can expand I/O, add PLC logic, connect to over 175 drivers through a built-in gateway, enable data acquisition via UniNET and OPC server, and offer modular configurations and communication options. They allow connecting Galil controllers to other controllers for intelligent communications and sharing information.
GAM was founded in 1990 and brought the Jakob coupling to North America. It has since grown to have 25% of the market share for bellows couplings and launched its first in-house gear product in 2004. The company produces a wide range of gearboxes, couplings, and customized engineered solutions for motion control applications.
The document discusses a new generation of cylinder called the Robo Cylinder produced by IAI. Key details include:
- IAI is a fast growing private company in Japan that produces industrial robots and cylinders.
- The Robo Cylinder uses an integrated electric motor and controller to perform 7 functions including multi-positioning, speed control, and more flexibility than traditional air cylinders.
- IAI has expanded with a new factory completed in 2004 to increase production of its robotic products.
Hd Systems LLC actively marketed products 2006Electromate
The document describes various gear component sets and gearheads sold and serviced by Electromate, including CSF, CSG "Quantum", CSD "Ultra Flat", SHF "Silk Hat", SHG "Silk Hat Quantum", HDUF "Pancake", HDUR "Pancake", HDT "T cup", HDB phasing gear set, HDI "Infinit-Indexer", and CSF-2UH gearhead. It provides information on sizes, ratios, torque and life specifications for each product.
This document provides information about Electromate, a company that sells and services automation controllers and software. It summarizes the key features of Electromate's new RCP2 and ERC controllers, including their I/O configurations, connections for linking multiple units, and new RC software features like a tree view navigation and error code monitoring.
Tolomatic ICR Smart Actuator Product Presentation may 2009Electromate
The document introduces the ICR SmartActuator series from Electromate. It includes the ICR Basic and ICR Plus models, which are integrated servo motor, drive, and controller units. The ICR Basic provides plug-and-play operation for basic two-position motion, while the ICR Plus allows for more advanced programming and network communication options. Both models offer compact, durable designs suitable for industrial automation applications.
Haydon Kerk motion systems linear motion presentation 2010Electromate
This document discusses linear systems that use leadscrews and nuts to provide precise linear positioning. It describes how leadscrews work using the mechanical advantage of an inclined plane to convert rotational motion to linear motion. It discusses key characteristics of leadscrews like diameter, lead, and pitch. It also discusses how rolling is used to manufacture leadscrews, providing benefits like increased accuracy and low friction. The document addresses how clearances between leadscrews and nuts can cause backlash, and describes different methods like gravity bias, springs, and elastic rings that are used to eliminate backlash.
Galil medical nano presentation may 2009Electromate
This document discusses Galil Motion Controllers and provides information about Galil as a company, their support resources, controller features, and programming capabilities. Specifically, it outlines that Galil has been in business since 1983, provides worldwide technical support, and that their motion controllers can handle various motion types at high speeds with intelligent on-board programming.
The document introduces the new MXE rodless linear motion system from Electromate. It highlights that the MXE system offers maximum durability through its platform design and uses of band and bearing technologies. The MXE provides pneumatic and electric options across 30 products and 6 frame sizes, with solid or profiled bearing choices to suit different load and speed applications. Electromate promotes the MXE's flexibility, durability, and price points.
Nippon Pulse linear shaft motor product presentation 2011 in english and germanElectromate
The document discusses a linear shaft motor system for ultra-precision applications. It describes the motor as having a coreless design with cylindrical coils to maximize stiffness while avoiding issues like cogging forces and heat generation from eddy currents. The motor is rated conservatively to dissipate heat directly to air without external cooling. It can achieve nanometer-level positioning accuracy with minimal following error.
Nippon Pulse Stepper Motor Basics Presentation Electromate
A stepper motor takes input pulses and moves in proportional steps, making it useful for precision positioning and speed control applications. It requires a power circuit and sequencing circuit to change the phase of its coils. Stepper motors are used in medical devices, semiconductor manufacturing equipment, factory automation systems, office equipment, home appliances, and more. The document goes on to describe how stepper motors generate movement through unipolar or bipolar drive circuits and coils.
Nippon Pulse linear shaft motor presentation 2005Electromate
The document discusses the principles and operation of a linear shaft motor. It describes the motor's structure, which consists of magnets and coils on a sliding part that moves along a shaft. The motor produces thrust using Fleming's left-hand rule as current passes through the coils in the magnetic field. It also highlights several advantages of linear shaft motors like their ability to produce high thrust yet remain compact and lightweight. Applications mentioned include using the motors for high-precision positioning.
This document discusses linear motion components, including linear bearing types (ball & rod, cross roller, plastic roller, round rail, square rail) and mechanical drive types (manual, screw driven, belt & pulley driven). It provides information on selecting the proper component based on factors like load, travel distance, accuracy needs. The document is an overview presented by LINTECH of their positioning components and systems.
This document provides an overview of basic electronics concepts including the elements of electricity, circuit diagrams, components like resistors and capacitors, and measurement tools like multimeters. It explains key electrical concepts such as voltage, current, resistance, and Ohm's Law. It also outlines different circuit types and how components are represented in schematics. The document is intended as an introductory guide to basic electronics for students and technicians.
Applied Motion Products stm23 presentation july 2008Electromate
The STM drive+motor unit combines a step motor and drive into a single device. It offers savings on space, wiring and cost over separate motor and drive solutions. The STM provides dynamic current control, anti-resonance, torque ripple smoothing and command signal smoothing. An optional integrated encoder adds stall detection, prevention and position maintenance without increasing size. The STM is available in multiple communication, control and programming models for stand-alone, host-controlled and multi-axis applications.
MicroE Systems mercury ii product presentationElectromate
The document provides information on Mercury II encoder models from MicroE Systems including the MII6000, MII5000, MII1900, MII1600, linear glass scales, rotary glass scales, and metal tape scales. Key features outlined are resolutions from 5um to 1.2nm, quadrature or serial word outputs, speeds up to 10m/s, programmable features, and small sensor sizes. Application areas include servo motor feedback. The encoders go through extensive testing and qualification.
Galil presentation advanced motion control techniques for nanopositioning ap...Electromate
This document discusses advanced motion control techniques for nanopositioning applications. It provides an overview of Galil Motion Control, including their product lineup and technical support offerings. Key topics covered include Galil controllers and drives, the Galil control filter for precision motion control, and applications in medical and biotech industries.
Galil DMC-30000 New Product Presentation October 2011Electromate
The document describes the DMC-300xx single-axis motion controller and 800W sine drive from Galil. The DMC-300xx is a smart, compact and low-cost controller that uses a 32-bit processor for fast processing. It can control servos or steppers and multiple units can be daisy chained over Ethernet without a hub. The DMC-30012 package includes an 800W brushless sine drive. It is a smaller and lower-cost alternative to Galil's existing motion controllers, well-suited for remote single-axis motor control applications.
The document discusses maxon motor, a leading supplier of precision drives and systems, including their focus on medical technology applications through their maxon medical business unit. It provides an overview of maxon motor's history, global operations, quality management systems, product portfolio of precision motors and customized solutions, and their role as a supplier for applications such as medical devices, robots, nanotechnology, and more.
Similar to Nippon Pulse high precision linear motion made simple presentation 2009 (14)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...Electromate
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...Electromate
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...Electromate
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...Electromate
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...Electromate
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Electromate
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...Electromate
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with BrakeElectromate
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsElectromate
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported SpecsElectromate
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsElectromate
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CAElectromate
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsElectromate
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsElectromate
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC SpecsElectromate
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB SpecsElectromate
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Webinar: Designing a schema for a Data WarehouseFederico Razzoli
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Project Management Semester Long Project - Acuityjpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Choosing The Best AWS Service For Your Website + API.pptx
Nippon Pulse high precision linear motion made simple presentation 2009
1. High Precision Linear Motion made Simple
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. • Privately held company in Japan
• Date of Incorporation was May 20, 1952
• President & CEO, Hiroki Hashidate
• Has 2 offices and 2 factories in Japan
• Has 1 factory in China
• Has 5 subsidiary companies &
1 sales office overseas
• Quality System
– ISO 9001 year 2000 Certified
• Environmental Standards Sold & Serviced By:
ELECTROMATE
– ISO 14001 year 2004 certified Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
3. • The customer is always first
– We strive to achieve customer impression, more
than satisfaction.
• Employees are the biggest asset
– Encourage each employee’s willingness to do their
best.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
5. • ASIC Based Motion
Control Chips
– PCL series/PCD series
• PC Based Multi-axis
Controllers
– PPCI, NPMC series
• Simple Hand-held
Unit
(Motion Checker)
– MCH series Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
6. • Stepper Motors
Driver Chips for
Bipolar /Unipolar
– NP series
• Stepper Motors
Driver Modules
– BD series
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
7. • Tin-can Stepper Motors
– PF/PFC series
• Linear Stepper Motors
– PFL series
• Hybrid Stepper Motors
– PJB series &
PR series
• Synchronous Timing
Motors
– PTM series
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
8. • Linear Shaft Motors
(brushless)
– S series
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
9. • Serial communication chips
– G9000 series
• Networking modules
– for Master modules
– for local modules
• I/O device
• Control device
• CPU emulation
device
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
10. • Per customer’s specifications
– Various X-Y Stages for Bio and Medical
• Actuators (Motor + Electronics integration)
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
11. • What is a Linear Shaft Motor?
– (Theory and Structure)
– What are their advantage over other linear motion
systems?
– What is the True Cost of using the Linear Shaft
Motor?
• How to use / select
• Applications
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
13. • Linear Induction Motor (LIM)
• Linear Pulse Motor (LPM)
• Linear DC Motor (DCLM)
– Voice Coil Motor
• Linear Synchronous Motor (LSM)
– Flat type, U type, and Cylindrical type
• With core
• Coreless --- Linear Shaft Motor
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
14. 8 000 8 0%
Efficiency
7 000 F- V 7 0%
F-V Output
定 格推 力
出力
6 000 効率 6 0%
5 000 5 0%
F O R CE ( N)
4 000 4 0%
3 000 3 0%
2 000 2 0%
1 000 1 0%
Sold & Serviced By:
0 0% ELECTROMATE
0 0 .5 1 1 .5 2 2.5 3 3.5 4 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
V EL OC IT Y (m / sec ) www.electromate.com
sales@electromate.com
S605Q Specification Curve
16. Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
US Patent 06,040,642 www.electromate.com
sales@electromate.com
US Patent 2006162650A
17. u w v u w v u w v
N S S N N S S N N S S N
u w v u w v u w v
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
Fleming’s right hand law sales@electromate.com
18. Magnetic field distribution
Simulated by FEM Actual
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
19. • Linear motion design rule
– Force = Current * Magnetic field
F=IxB
– where
F = forces, measured in Newton's
I = current in wire, measured in amperes
B = magnetic field, measured in teslas
• Temperature increase = I(Current)2 x R
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
20. • Coreless design
• No iron in forcer or shaft
• No cogging
• Stiff design
– The coils themselves are the core, thus the stiffness of
Sold & Serviced By:
an iron core design ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
21. • Iron Core (Platen & Cylindrical)
Force
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Current
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
23. • Linear Shaft Motor
Force
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Current Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
24. Large Air Gap
0.5mm to 2.5mm
nominal annular air gap
(1 to 5mm total)
Non-critical
No variation in force as
gap varies over stroke of
device Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
25. Coil
Magnetic Flux Magnets
Ineffective use of flux (Coil)
Coil
Magnetic Flux
Cylindrical type
Sold & Serviced By:
ELECTROMATE
Effective use of flux Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
Magnets www.electromate.com
sales@electromate.com
26. • Because of the non-contact design,
– No lubrication
– No adjustment necessary.
• Eco-friendly
– No noise
– No dust.
• Energy efficient
• Very simple setup
• Simple alignment Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
27. Linear Motor Flat & Coreless
Cylindrical Coreless Flat Cylindrical
Type type with core Linear Shaft Motor
Power
High Low High
Output
Stiffness High Low High
Absorption
Very High None None
force
Result of Need more space
adsorption force for assembly
No effect No effect
Sold & Serviced By:
ELECTROMATE
Cogging Large None None Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
30. • Are published specs
– “True” specs or
– “If” specs
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
31. • Linear motor specs are not always what they seem.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
32. • Continuous and Peak forces looks similar
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
33. • Continuous current and Resistance looks similar
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
34. • What is Peak Force based on?
– U-motor 1 second
– LSM 40 second
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
35. • What is continuous Force based
on?
– U-motor 75°C (100°C total)
– LSM 110°C (135°C total)
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
36. Efficient Heat Dissipation
Sold & Serviced By:
After 24 hours of operation @ 10lbs cont force
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
39. 0.05
0.045
0.04
V e lo c it y (mm / s ) 0.035
0.03
0.025
0.02
0.015
0.01
0.005
0
0 50 100 150 200 2 50
Time (s)
Velocity fluctuation is under 0.01%.
Motor: 2-S160T in parallel Encoder: Heidenhain Sold & Serviced By:
Maximum velocity: 8 µm/sec Resolution: 10 nm ELECTROMATE
Toll Free Phone (877) SERVO98
Payload: 25kg (55 lbs) Driver: Delta Tau P-Mac Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Guide: Air bearing
43. • The savings really comes down to the
number of parts needed to build the
system and the complexities of these
parts.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
44. • Rotary To Linear Systems
– Each part requires a PO
– Every part must be inspected to verify it’s quality
– All the parts need to be arranged and stocked to
allow for an efficient build Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
45. • Linear Shaft Motor
– 1 part number (2 parts)
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
46. • Ball and lead screws require true
concentricity between the screw and
the nut, and they require high levels of
parallelism between these and the
linear guide.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
47. • Linear Motor*
– Straightness - ± 381 microns (0.015 inch)
– Flatness - ≤ 889 microns (0.035 inch)
• Piezoelectric Motor†
– Straightness - ± 50 µ
– Flatness - ≤ 50 microns (0.0019 inch)
• Linear Shaft Motor
– Straightness - ± 0.5mm to 2.5mm (0.02 to 0.1 inch)
– Flatness - ≤ 1mm to 5mm (0.04 to 0.2 inch)
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
48. • Cheaper components might later add to
manufacturing cost
– the total number of parts
– time required to do alignments
– required burn-in period
– required tuning time
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
49. • Ball / Lead Screw
Rotary Motor Bearing Housing Ballnut
Flexible Coupling
Ball / Lead Screw
Support Bearing
Encoder
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
50. • Ball / Lead Screw
Rotary MotorEvery
– part must be inspected and installed
Bearing Housing Ballnut
– Adjustments required for concentricity between
Flexible Coupling
the screw and the nut
Ball / Lead Screw
– And, high levels of parallelism between screw and
the linear guide
– Rotary inertia of the screw can makes it difficult to
tune servo Support Bearing
Encoder
– Adjustments for screw longitudinal and torsional Sold & Serviced By:
deformation ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
51. • Linear Shaft Motor
Linear Shaft Motor Linear Encoder
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
53. LSM vs Ball Screw
This is for a system with a target of 50nm, 100mm usable stroke, and required continous force is 2N.
Note: Prices in US$, Based on Qty 25 and current as of 11/17/06
Ball Screw LSM
Description Part Number Cost Description Part Number Cost
Precision Ball Screw BSX0802-187 $ 487.80 Shaft Motor S160D-100 $ 602.50
Support Unit Fixed side BSWR8 $ 106.00 Shaft Support SHA16 $ 13.40
Support Unit Support side BUNR8 $ 27.10 Driver HAR2/100I $ 506.00
Stopper BSTP8 $ 11.30 Encoder, AnalogRGH24B15L00A $ 420.00
Bracket for Ball Screw BNFB304 $ 31.50 Total $ 1,541.90
Screws CB4-8 $ 0.60
Coupling MCGS16 $ 15.50
Motor PJB42S41B14 $ 70.00
256 Driver $ 150.00
Sub-total $ 899.80
Encoder 50nm RGH24H15D30A $ 795.00 Sold & Serviced By:
Total $ 1,694.80 ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
54. (In comparison to types of liner motion)
• The ability to use commercially available servo drivers.
• Higher speeds are able to be achieved while retaining
high precision.
– At the same time, extremely high precision low speed uniformity
and high repeatability are possible.
• Because of the non-contact design, no lubrication or
adjustment necessary.
• Very simple setup and operation time. No need for
extended burn in.
• Simple alignment and QC period.
• Eco-friendly - no noise, no dust.
• Energy efficient, - power requirements are lower then
that of ball screw systems.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
55. • Maximum force 36000N (S1150T)
• Smallest motor S040D 25x10x10mm
• Longest stroke 4.6m (15’ 1”)
• Fastest speed 6.3m/sec (21ft/sec)
• Slowest speed 8 µm/sec
• Maximum acceleration 20G
• Velocity fluctuation under 0.05%
• Finest resolution 70pm Sold & Serviced By:
ELECTROMATE
(0.00007µm) Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
56. • What is a Linear Shaft Motor?
– (Theory and Structure)
– What are their advantage over other linear motion
systems?
– What is the True Cost of using the Linear Shaft
Motor?
• How to use / select
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
61. Calculations
-
In these equations, “μ” is the coefficient of friction on the guide.
"g" is as the acceleration of gravity. g = 9.81 m/sec2
Continuous Force => Feff
Sold & Serviced By:
Peak Force => larger Fa ELECTROMATE
or Fd
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
64. • What is a Linear Shaft Motor?
– (Theory and Structure)
– What are their advantage over other linear motion
systems?
– What is the True Cost of using the Linear Shaft
Motor?
• How to use / select
• Applications
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
68. • LCD
• Boiling machine
• Injection
• Stage
• Eject robot
• Handling
• Semiconductor before process
• Semiconductor after process
• Bonding
• Surface mounter
• Organic Electroluminescence (OEL) Display
• Robot
• Other Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
69. • Office Automation
• Medical
• Printer
• Machine parts
• Health
• Automatic sliding doors
• Food handling
• Fiber
• Research
• Other Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
70. Linear Shaft Motor Part Number
S ┬
Shaft Size (D)
040 ┬
Forcer Size (A) ▬ Usable Stroke ▬ Options ▬ Options
X ▬ XXXX ▬ XX ▬ XX
• Available
Modifications
├ 080 ┤
├ 120 ┤ FO Forcer Only
├ 160 ┤ SO Shaft Only
├ 200 ┤ XX Two digit for custom motor
├
├
250
320
┤
┤ ST Standard – Waterproof IPX8
├ 350 ┤ WP Waterproof
├
├
427
435
┤
┤
HA
CE
Digital Hall Effect
CE type motor – Shaft support
length
├ 500 ┤
XX usable stroke in millimeters
└ 1000 ┘
S Single winding
– End Caps
D Double (2) windings
T Triple (3) windings
Q Quadruple (4) windings
– CE type
H Hextuple (6) windings
X Octuple (8) windings
XX Shaft diameter in mm *10
– Hall effects
• Digital
S Linear Shaft Motor
V Vacuum Linear Shaft Motor
•Q&A
Example:
S160T-350-ST
A standard 16 mm Shaft Motor with a triple coil Sold & Serviced By:
and a 350 mm usable stroke length. ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com